From: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>,
Peter Zijlstra <peterz@infradead.org>,
Suresh Siddha <suresh.b.siddha@intel.com>,
linux-kernel <linux-kernel@vger.kernel.org>,
Paul Turner <pjt@google.com>
Subject: Re: sched: Avoid SMT siblings in select_idle_sibling() if possible
Date: Thu, 23 Feb 2012 17:48:25 +0530 [thread overview]
Message-ID: <20120223121825.GC8454@linux.vnet.ibm.com> (raw)
In-Reply-To: <20120223111929.GA23646@elte.hu>
* Ingo Molnar <mingo@elte.hu> [2012-02-23 12:19:29]:
> sysbench is one of the best ones punishing bad scheduler
> balancing mistakes.
Here are the sysbench oltp score on same machine i.e:
Machine : 2 Quad-core Intel X5570 CPU (H/T enabled)
Kernel : tip (HEAD at 6241cc8)
sysbench : 0.4.12
sysbench was run with 16 threads as:
./sysbench --num-threads=16 --max-requests=100000 --test=oltp --oltp-table-size=500000 --mysql-socket=/var/lib/mysql/mysql.sock --oltp-read-only --mysql-user=root --mysql-password=blah run
sysbench was run 5 times with fs-cache being purged before each run
(echo 3 > /proc/sys/vm/drop_caches).
Average of 5 runs alongwith % std. dev. is noted for various OLTP stats
SD_BALANCE_WAKE SD_BALANCE_WAKE
disabled enabled
transactions (per sec) 4833.826 (+- 0.75%) 4837.354 (+- 1%)
read/write requests (per sec) 67673.580 (+- 0.75%) 67722.960 (+- 1%)
other ops (per sec) 9667.654 (+- 0.75%) 9674.710 (+- 1%)
There is minor improvement seen when SD_BALANCE_WAKE is enabled at SMT/MC
domains, but no degradation observed with it enabled.
- vatsa
next prev parent reply other threads:[~2012-02-23 12:18 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-15 9:46 sched: Avoid SMT siblings in select_idle_sibling() if possible Peter Zijlstra
2011-11-16 1:14 ` Suresh Siddha
2011-11-16 9:24 ` Mike Galbraith
2011-11-16 18:37 ` Suresh Siddha
2011-11-17 1:59 ` Mike Galbraith
2011-11-17 15:38 ` Mike Galbraith
2011-11-17 15:56 ` Peter Zijlstra
2011-11-17 16:38 ` Mike Galbraith
2011-11-17 17:36 ` Suresh Siddha
2011-11-18 15:14 ` Mike Galbraith
2011-11-18 15:17 ` [patch 1/6] sched: use rt.nr_cpus_allowed to recover select_task_rq() cycles Mike Galbraith
2011-11-18 15:35 ` Peter Zijlstra
2011-11-18 17:34 ` Mike Galbraith
2011-11-22 14:17 ` Mike Galbraith
2011-11-22 14:18 ` [patch 1/7] " Mike Galbraith
2011-12-06 9:50 ` [tip:sched/core] sched: Use " tip-bot for Mike Galbraith
2011-11-22 14:20 ` [patch 2/7] sched: save some hrtick_start_fair cycles Mike Galbraith
2011-12-06 20:20 ` [tip:sched/core] sched: Save " tip-bot for Mike Galbraith
2011-11-22 14:21 ` [patch 3/7] sched: set skip_clock_update in yield_task_fair() Mike Galbraith
2011-11-23 11:53 ` Peter Zijlstra
2011-11-23 12:06 ` Mike Galbraith
2011-11-23 14:48 ` Peter Zijlstra
2011-11-24 3:50 ` Mike Galbraith
2011-11-24 10:12 ` Peter Zijlstra
2011-11-25 6:39 ` Mike Galbraith
2011-12-06 9:51 ` [tip:sched/core] sched: Set " tip-bot for Mike Galbraith
2011-11-22 14:22 ` [patch 4/7] sched: convert rq->avg_idle to rq->avg_event Mike Galbraith
2011-11-23 11:55 ` Peter Zijlstra
2011-11-23 12:09 ` Mike Galbraith
2011-11-23 12:27 ` Peter Zijlstra
2011-11-23 12:57 ` Mike Galbraith
2011-11-23 14:21 ` Mike Galbraith
2011-11-22 14:23 ` [patch 5/7] sched: ratelimit select_idle_sibling()for sync wakeups Mike Galbraith
2011-11-22 14:24 ` [patch 6/7] sched: use rq->avg_event to resurrect nohz ratelimiting Mike Galbraith
2011-11-23 11:57 ` Peter Zijlstra
2011-11-23 12:35 ` Mike Galbraith
2011-11-22 14:26 ` [patch 7/7] sched: only use TTWU_QUEUE when waker/wakee CPUs do not share top level cache Mike Galbraith
2011-11-23 12:08 ` Peter Zijlstra
2011-11-18 15:39 ` [patch 1/6] sched: use rt.nr_cpus_allowed to recover select_task_rq() cycles Hillf Danton
2011-11-18 15:18 ` [patch 2/6] sched: convert rq->avg_idle to rq->avg_event Mike Galbraith
2011-11-18 15:19 ` [patch 3/6] sched: use rq->avg_event to resurrect nohz ratelimiting Mike Galbraith
2011-11-18 15:36 ` Peter Zijlstra
2011-11-18 17:42 ` Mike Galbraith
2011-11-19 0:51 ` Van De Ven, Arjan
2011-11-19 4:15 ` Mike Galbraith
2011-11-18 15:20 ` [patch 4/6] sched: ratelimit select_idle_sibling()for sync wakeups Mike Galbraith
2011-11-18 15:22 ` [patch 5/6] sched: save some hrtick_start_fair cycles Mike Galbraith
2011-11-18 15:23 ` [patch 6/6] sched: set skip_clock_update in yield_task_fair() Mike Galbraith
2012-02-20 14:41 ` sched: Avoid SMT siblings in select_idle_sibling() if possible Peter Zijlstra
2012-02-20 15:03 ` Srivatsa Vaddagiri
2012-02-20 18:25 ` Mike Galbraith
2012-02-21 0:06 ` Srivatsa Vaddagiri
2012-02-21 6:37 ` Mike Galbraith
2012-02-21 8:09 ` Srivatsa Vaddagiri
2012-02-20 18:14 ` Mike Galbraith
2012-02-20 18:15 ` Peter Zijlstra
2012-02-20 19:07 ` Peter Zijlstra
2012-02-21 5:43 ` Mike Galbraith
2012-02-21 8:32 ` Srivatsa Vaddagiri
2012-02-21 9:21 ` Mike Galbraith
2012-02-21 10:37 ` Peter Zijlstra
2012-02-21 14:58 ` Srivatsa Vaddagiri
2012-02-23 10:49 ` Srivatsa Vaddagiri
2012-02-23 11:19 ` Ingo Molnar
2012-02-23 12:18 ` Srivatsa Vaddagiri [this message]
2012-02-23 11:20 ` Srivatsa Vaddagiri
2012-02-23 11:26 ` Ingo Molnar
2012-02-23 11:32 ` Srivatsa Vaddagiri
2012-02-23 16:17 ` Ingo Molnar
2012-02-23 11:21 ` Mike Galbraith
2012-02-25 6:54 ` Srivatsa Vaddagiri
2012-02-25 8:30 ` Mike Galbraith
2012-02-27 22:11 ` Suresh Siddha
2012-02-28 5:05 ` Mike Galbraith
2011-11-17 19:08 ` Suresh Siddha
2011-11-18 15:12 ` Peter Zijlstra
2011-11-18 15:26 ` Mike Galbraith
2011-12-06 9:49 ` [tip:sched/core] sched: Clean up domain traversal in select_idle_sibling() tip-bot for Suresh Siddha
2011-11-18 23:40 ` [tip:sched/core] sched: Avoid SMT siblings in select_idle_sibling() if possible tip-bot for Peter Zijlstra
[not found] <1329764866.2293.376.camhel@twins>
2012-03-05 15:24 ` Srivatsa Vaddagiri
2012-03-06 9:14 ` Ingo Molnar
2012-03-06 10:03 ` Srivatsa Vaddagiri
2012-03-22 15:32 ` Srivatsa Vaddagiri
2012-03-23 6:38 ` Mike Galbraith
2012-03-26 8:29 ` Peter Zijlstra
2012-03-26 8:36 ` Peter Zijlstra
2012-03-26 17:35 ` Srivatsa Vaddagiri
2012-03-26 18:06 ` Peter Zijlstra
2012-03-27 13:56 ` Mike Galbraith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120223121825.GC8454@linux.vnet.ibm.com \
--to=vatsa@linux.vnet.ibm.com \
--cc=efault@gmx.de \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=peterz@infradead.org \
--cc=pjt@google.com \
--cc=suresh.b.siddha@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).