* RE: [PATCH] wdt:clk: preparation for switch to common clock framework
[not found] <1346351350-28807-1-git-send-email-m-karicheri2@ti.com>
@ 2012-09-07 18:36 ` Karicheri, Muralidharan
2012-09-11 21:09 ` Wim Van Sebroeck
2012-09-07 21:27 ` Mike Turquette
1 sibling, 1 reply; 3+ messages in thread
From: Karicheri, Muralidharan @ 2012-09-07 18:36 UTC (permalink / raw)
To: Karicheri, Muralidharan, linux-kernel, mturquette, linux-watchdog, wim
>> -----Original Message-----
>> From: Karicheri, Muralidharan
>> Sent: Thursday, August 30, 2012 2:29 PM
>> To: linux-kernel@vger.kernel.org; mturquette@linaro.org; linux-
>> watchdog@vger.kernel.org; wim@iguana.be
>> Cc: Karicheri, Muralidharan
>> Subject: [PATCH] wdt:clk: preparation for switch to common clock framework
>>
>> As a first step towards migrating davinci platforms to use common clock
>> framework, replace all instances of clk_enable() with clk_prepare_enable()
>> and clk_disable() with clk_disable_unprepare(). Until the platform is
>> switched to use the CONFIG_HAVE_CLK_PREPARE Kconfig variable, this just
>> adds a might_sleep() call and would work without any issues.
>>
>> This will make it easy later to switch to common clk based implementation
>> of clk driver from DaVinci specific driver.
>>
>> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
>> ---
>> drivers/watchdog/davinci_wdt.c | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
>> index c8c5c80..eb44b03 100644
>> --- a/drivers/watchdog/davinci_wdt.c
>> +++ b/drivers/watchdog/davinci_wdt.c
>> @@ -208,7 +208,7 @@ static int __devinit davinci_wdt_probe(struct platform_device
>> *pdev)
>> if (WARN_ON(IS_ERR(wdt_clk)))
>> return PTR_ERR(wdt_clk);
>>
>> - clk_enable(wdt_clk);
>> + clk_prepare_enable(wdt_clk);
>>
>> if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
>> heartbeat = DEFAULT_HEARTBEAT;
>> @@ -256,7 +256,7 @@ static int __devexit davinci_wdt_remove(struct platform_device
>> *pdev)
>> wdt_mem = NULL;
>> }
>>
>> - clk_disable(wdt_clk);
>> + clk_disable_unprepare(wdt_clk);
>> clk_put(wdt_clk);
>>
>> return 0;
>> --
>> 1.7.9.5
subsystem owner,
Could you please review and apply this patch as needed? We need to get this upstream before submitting the patch for Common clock framework support for mach-davinci. If I need to follow a specific procedure to get this merged, please direct me to a process page.
Thanks.
Murali Karicheri
Software Design Engineer
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] wdt:clk: preparation for switch to common clock framework
[not found] <1346351350-28807-1-git-send-email-m-karicheri2@ti.com>
2012-09-07 18:36 ` [PATCH] wdt:clk: preparation for switch to common clock framework Karicheri, Muralidharan
@ 2012-09-07 21:27 ` Mike Turquette
1 sibling, 0 replies; 3+ messages in thread
From: Mike Turquette @ 2012-09-07 21:27 UTC (permalink / raw)
To: Murali Karicheri, linux-kernel, linux-watchdog, wim; +Cc: Murali Karicheri
Quoting Murali Karicheri (2012-08-30 11:29:10)
> As a first step towards migrating davinci platforms to use common clock
> framework, replace all instances of clk_enable() with clk_prepare_enable()
> and clk_disable() with clk_disable_unprepare(). Until the platform is
> switched to use the CONFIG_HAVE_CLK_PREPARE Kconfig variable, this just
> adds a might_sleep() call and would work without any issues.
>
> This will make it easy later to switch to common clk based implementation
> of clk driver from DaVinci specific driver.
>
> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
> ---
> drivers/watchdog/davinci_wdt.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
> index c8c5c80..eb44b03 100644
> --- a/drivers/watchdog/davinci_wdt.c
> +++ b/drivers/watchdog/davinci_wdt.c
> @@ -208,7 +208,7 @@ static int __devinit davinci_wdt_probe(struct platform_device *pdev)
> if (WARN_ON(IS_ERR(wdt_clk)))
> return PTR_ERR(wdt_clk);
>
> - clk_enable(wdt_clk);
> + clk_prepare_enable(wdt_clk);
>
> if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
> heartbeat = DEFAULT_HEARTBEAT;
> @@ -256,7 +256,7 @@ static int __devexit davinci_wdt_remove(struct platform_device *pdev)
> wdt_mem = NULL;
> }
>
> - clk_disable(wdt_clk);
> + clk_disable_unprepare(wdt_clk);
> clk_put(wdt_clk);
>
> return 0;
> --
> 1.7.9.5
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] wdt:clk: preparation for switch to common clock framework
2012-09-07 18:36 ` [PATCH] wdt:clk: preparation for switch to common clock framework Karicheri, Muralidharan
@ 2012-09-11 21:09 ` Wim Van Sebroeck
0 siblings, 0 replies; 3+ messages in thread
From: Wim Van Sebroeck @ 2012-09-11 21:09 UTC (permalink / raw)
To: Karicheri, Muralidharan; +Cc: linux-kernel, mturquette, linux-watchdog
Hi Karicheri,
> >> -----Original Message-----
> >> From: Karicheri, Muralidharan
> >> Sent: Thursday, August 30, 2012 2:29 PM
> >> To: linux-kernel@vger.kernel.org; mturquette@linaro.org; linux-
> >> watchdog@vger.kernel.org; wim@iguana.be
> >> Cc: Karicheri, Muralidharan
> >> Subject: [PATCH] wdt:clk: preparation for switch to common clock framework
> >>
> >> As a first step towards migrating davinci platforms to use common clock
> >> framework, replace all instances of clk_enable() with clk_prepare_enable()
> >> and clk_disable() with clk_disable_unprepare(). Until the platform is
> >> switched to use the CONFIG_HAVE_CLK_PREPARE Kconfig variable, this just
> >> adds a might_sleep() call and would work without any issues.
> >>
> >> This will make it easy later to switch to common clk based implementation
> >> of clk driver from DaVinci specific driver.
> >>
> >> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Could you resent the original e-mail because I didn't seem to have received it...
And I can't even find it in the linux-watchdog mailing list archives...
Thanks,
Wim.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-09-11 21:09 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <1346351350-28807-1-git-send-email-m-karicheri2@ti.com>
2012-09-07 18:36 ` [PATCH] wdt:clk: preparation for switch to common clock framework Karicheri, Muralidharan
2012-09-11 21:09 ` Wim Van Sebroeck
2012-09-07 21:27 ` Mike Turquette
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).