[PATCH 1/2] input: gpio-keys: Disable hardware on suspend

[PATCH 1/2] input: gpio-keys: Disable hardware on suspend

[Lee Jones]

From: Jonas Aaberg <jonas.aberg@stericsson.com>

Disable hardware if active when suspending if the hw can not
wake the system from suspend.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
Reviewed-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
---
 drivers/input/keyboard/gpio_keys.c |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 6a68041..2cf6757 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -46,6 +46,8 @@ struct gpio_keys_drvdata {
 	const struct gpio_keys_platform_data *pdata;
 	struct input_dev *input;
 	struct mutex disable_lock;
+	bool enabled;
+	bool enable_after_suspend;
 	struct gpio_button_data data[0];
 };
 
@@ -531,6 +533,8 @@ static int gpio_keys_open(struct input_dev *input)
 	struct gpio_keys_drvdata *ddata = input_get_drvdata(input);
 	const struct gpio_keys_platform_data *pdata = ddata->pdata;
 
+	ddata->enabled = true;
+
 	return pdata->enable ? pdata->enable(input->dev.parent) : 0;
 }
 
@@ -539,6 +543,8 @@ static void gpio_keys_close(struct input_dev *input)
 	struct gpio_keys_drvdata *ddata = input_get_drvdata(input);
 	const struct gpio_keys_platform_data *pdata = ddata->pdata;
 
+	ddata->enabled = false;
+
 	if (pdata->disable)
 		pdata->disable(input->dev.parent);
 }
@@ -685,6 +691,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 
 	ddata->pdata = pdata;
 	ddata->input = input;
+	ddata->enabled = false;
 	mutex_init(&ddata->disable_lock);
 
 	platform_set_drvdata(pdev, ddata);
@@ -796,6 +803,10 @@ static int gpio_keys_suspend(struct device *dev)
 			if (bdata->button->wakeup)
 				enable_irq_wake(bdata->irq);
 		}
+	} else {
+		ddata->enable_after_suspend = ddata->enabled;
+		if (ddata->enabled)
+			gpio_keys_close(ddata->input);
 	}
 
 	return 0;
@@ -814,6 +825,10 @@ static int gpio_keys_resume(struct device *dev)
 		if (gpio_is_valid(bdata->button->gpio))
 			gpio_keys_gpio_report_event(bdata);
 	}
+
+	if (!device_may_wakeup(dev) && ddata->enable_after_suspend)
+		gpio_keys_open(ddata->input);
+
 	input_sync(ddata->input);
 
 	return 0;
-- 
1.7.9.5

[PATCH 2/2] input: gpio-keys: Add runtime support

[Lee Jones]

From: Jonas Aaberg <jonas.aberg@stericsson.com>

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
Reviewed-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
---
 drivers/input/keyboard/gpio_keys.c |   17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 2cf6757..cff548c 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -29,6 +29,7 @@
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
 #include <linux/spinlock.h>
+#include <linux/pm_runtime.h>
 
 struct gpio_button_data {
 	const struct gpio_keys_button *button;
@@ -533,6 +534,7 @@ static int gpio_keys_open(struct input_dev *input)
 	struct gpio_keys_drvdata *ddata = input_get_drvdata(input);
 	const struct gpio_keys_platform_data *pdata = ddata->pdata;
 
+	pm_runtime_get_sync(input->dev.parent);
 	ddata->enabled = true;
 
 	return pdata->enable ? pdata->enable(input->dev.parent) : 0;
@@ -547,6 +549,8 @@ static void gpio_keys_close(struct input_dev *input)
 
 	if (pdata->disable)
 		pdata->disable(input->dev.parent);
+
+	pm_runtime_put(input->dev.parent);
 }
 
 /*
@@ -708,6 +712,8 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 	input->id.product = 0x0001;
 	input->id.version = 0x0100;
 
+	pm_runtime_enable(&pdev->dev);
+
 	/* Enable auto repeat feature of Linux input subsystem */
 	if (pdata->rep)
 		__set_bit(EV_REP, input->evbit);
@@ -773,6 +779,8 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev)
 	struct input_dev *input = ddata->input;
 	int i;
 
+	pm_runtime_disable(&pdev->dev);
+
 	sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group);
 
 	device_init_wakeup(&pdev->dev, 0);
@@ -805,8 +813,8 @@ static int gpio_keys_suspend(struct device *dev)
 		}
 	} else {
 		ddata->enable_after_suspend = ddata->enabled;
-		if (ddata->enabled)
-			gpio_keys_close(ddata->input);
+		if (ddata->enabled && ddata->disable)
+			ddata->disable(dev);
 	}
 
 	return 0;
@@ -826,8 +834,9 @@ static int gpio_keys_resume(struct device *dev)
 			gpio_keys_gpio_report_event(bdata);
 	}
 
-	if (!device_may_wakeup(dev) && ddata->enable_after_suspend)
-		gpio_keys_open(ddata->input);
+	if (!device_may_wakeup(dev) && ddata->enable_after_suspend
+	    && ddata->enable)
+		ddata->enable(dev);
 
 	input_sync(ddata->input);
 
-- 
1.7.9.5

Re: [PATCH 2/2] input: gpio-keys: Add runtime support

[Lee Jones]

Ignore this.

I've just rebased and the API has changed slightly.

Will fixup and resend.

> From: Jonas Aaberg <jonas.aberg@stericsson.com>
> 
> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> Cc: linux-input@vger.kernel.org
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
> Reviewed-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
> ---
>  drivers/input/keyboard/gpio_keys.c |   17 +++++++++++++----
>  1 file changed, 13 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
> index 2cf6757..cff548c 100644
> --- a/drivers/input/keyboard/gpio_keys.c
> +++ b/drivers/input/keyboard/gpio_keys.c
> @@ -29,6 +29,7 @@
>  #include <linux/of_platform.h>
>  #include <linux/of_gpio.h>
>  #include <linux/spinlock.h>
> +#include <linux/pm_runtime.h>
>  
>  struct gpio_button_data {
>  	const struct gpio_keys_button *button;
> @@ -533,6 +534,7 @@ static int gpio_keys_open(struct input_dev *input)
>  	struct gpio_keys_drvdata *ddata = input_get_drvdata(input);
>  	const struct gpio_keys_platform_data *pdata = ddata->pdata;
>  
> +	pm_runtime_get_sync(input->dev.parent);
>  	ddata->enabled = true;
>  
>  	return pdata->enable ? pdata->enable(input->dev.parent) : 0;
> @@ -547,6 +549,8 @@ static void gpio_keys_close(struct input_dev *input)
>  
>  	if (pdata->disable)
>  		pdata->disable(input->dev.parent);
> +
> +	pm_runtime_put(input->dev.parent);
>  }
>  
>  /*
> @@ -708,6 +712,8 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
>  	input->id.product = 0x0001;
>  	input->id.version = 0x0100;
>  
> +	pm_runtime_enable(&pdev->dev);
> +
>  	/* Enable auto repeat feature of Linux input subsystem */
>  	if (pdata->rep)
>  		__set_bit(EV_REP, input->evbit);
> @@ -773,6 +779,8 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev)
>  	struct input_dev *input = ddata->input;
>  	int i;
>  
> +	pm_runtime_disable(&pdev->dev);
> +
>  	sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group);
>  
>  	device_init_wakeup(&pdev->dev, 0);
> @@ -805,8 +813,8 @@ static int gpio_keys_suspend(struct device *dev)
>  		}
>  	} else {
>  		ddata->enable_after_suspend = ddata->enabled;
> -		if (ddata->enabled)
> -			gpio_keys_close(ddata->input);
> +		if (ddata->enabled && ddata->disable)
> +			ddata->disable(dev);
>  	}
>  
>  	return 0;
> @@ -826,8 +834,9 @@ static int gpio_keys_resume(struct device *dev)
>  			gpio_keys_gpio_report_event(bdata);
>  	}
>  
> -	if (!device_may_wakeup(dev) && ddata->enable_after_suspend)
> -		gpio_keys_open(ddata->input);
> +	if (!device_may_wakeup(dev) && ddata->enable_after_suspend
> +	    && ddata->enable)
> +		ddata->enable(dev);
>  
>  	input_sync(ddata->input);
>  
> -- 
> 1.7.9.5
> 

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH 1/2] input: gpio-keys: Disable hardware on suspend

[Dmitry Torokhov]

On Thu, Nov 22, 2012 at 01:23:36PM +0000, Lee Jones wrote:
> From: Jonas Aaberg <jonas.aberg@stericsson.com>
> 
> Disable hardware if active when suspending if the hw can not
> wake the system from suspend.

How about below instead (needs the other patch I have just sent out)?

Thanks.

-- 
Dmitry

Input: gpio-keys - disable hardware on suspend

From: Jonas Aaberg <jonas.aberg@stericsson.com>

Disable hardware if active when suspending if the hw can not
wake the system from suspend.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
Reviewed-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/input/keyboard/gpio_keys.c |   27 ++++++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)

diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index c7764ca..79435de 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -803,6 +803,7 @@ static int gpio_keys_remove(struct platform_device *pdev)
 static int gpio_keys_suspend(struct device *dev)
 {
 	struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev);
+	struct input_dev *input = ddata->input;
 	int i;
 
 	if (device_may_wakeup(dev)) {
@@ -811,6 +812,11 @@ static int gpio_keys_suspend(struct device *dev)
 			if (bdata->button->wakeup)
 				enable_irq_wake(bdata->irq);
 		}
+	} else {
+		mutex_lock(&input->mutex);
+		if (input->users)
+			gpio_keys_close(input);
+		mutex_unlock(&input->mutex);
 	}
 
 	return 0;
@@ -819,16 +825,27 @@ static int gpio_keys_suspend(struct device *dev)
 static int gpio_keys_resume(struct device *dev)
 {
 	struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev);
+	struct input_dev *input = ddata->input;
+	int error = 0;
 	int i;
 
-	for (i = 0; i < ddata->pdata->nbuttons; i++) {
-		struct gpio_button_data *bdata = &ddata->data[i];
-		if (bdata->button->wakeup && device_may_wakeup(dev))
-			disable_irq_wake(bdata->irq);
+	if (device_may_wakeup(dev)) {
+		for (i = 0; i < ddata->pdata->nbuttons; i++) {
+			struct gpio_button_data *bdata = &ddata->data[i];
+			if (bdata->button->wakeup)
+				disable_irq_wake(bdata->irq);
+		}
+	} else {
+		mutex_lock(&input->mutex);
+		if (input->users)
+			error = gpio_keys_open(input);
+		mutex_unlock(&input->mutex);
 	}
 
-	gpio_keys_report_state(ddata);
+	if (error)
+		return error;
 
+	gpio_keys_report_state(ddata);
 	return 0;
 }
 #endif

Re: [PATCH 1/2] input: gpio-keys: Disable hardware on suspend

[Lee Jones]

> On Thu, Nov 22, 2012 at 01:23:36PM +0000, Lee Jones wrote:
> > From: Jonas Aaberg <jonas.aberg@stericsson.com>
> > 
> > Disable hardware if active when suspending if the hw can not
> > wake the system from suspend.
> 
> How about below instead (needs the other patch I have just sent out)?

Sorry Dmitry, I'm a little confused. What does this mean?

> Input: gpio-keys - disable hardware on suspend
> 
> From: Jonas Aaberg <jonas.aberg@stericsson.com>
> 
> Disable hardware if active when suspending if the hw can not
> wake the system from suspend.
> 
> Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
> Reviewed-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> ---
>  drivers/input/keyboard/gpio_keys.c |   27 ++++++++++++++++++++++-----
>  1 file changed, 22 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
> index c7764ca..79435de 100644
> --- a/drivers/input/keyboard/gpio_keys.c
> +++ b/drivers/input/keyboard/gpio_keys.c
> @@ -803,6 +803,7 @@ static int gpio_keys_remove(struct platform_device *pdev)
>  static int gpio_keys_suspend(struct device *dev)
>  {
>  	struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev);
> +	struct input_dev *input = ddata->input;
>  	int i;
>  
>  	if (device_may_wakeup(dev)) {
> @@ -811,6 +812,11 @@ static int gpio_keys_suspend(struct device *dev)
>  			if (bdata->button->wakeup)
>  				enable_irq_wake(bdata->irq);
>  		}
> +	} else {
> +		mutex_lock(&input->mutex);
> +		if (input->users)
> +			gpio_keys_close(input);
> +		mutex_unlock(&input->mutex);
>  	}
>  
>  	return 0;
> @@ -819,16 +825,27 @@ static int gpio_keys_suspend(struct device *dev)
>  static int gpio_keys_resume(struct device *dev)
>  {
>  	struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev);
> +	struct input_dev *input = ddata->input;
> +	int error = 0;
>  	int i;
>  
> -	for (i = 0; i < ddata->pdata->nbuttons; i++) {
> -		struct gpio_button_data *bdata = &ddata->data[i];
> -		if (bdata->button->wakeup && device_may_wakeup(dev))
> -			disable_irq_wake(bdata->irq);
> +	if (device_may_wakeup(dev)) {
> +		for (i = 0; i < ddata->pdata->nbuttons; i++) {
> +			struct gpio_button_data *bdata = &ddata->data[i];
> +			if (bdata->button->wakeup)
> +				disable_irq_wake(bdata->irq);
> +		}
> +	} else {
> +		mutex_lock(&input->mutex);
> +		if (input->users)
> +			error = gpio_keys_open(input);
> +		mutex_unlock(&input->mutex);
>  	}
>  
> -	gpio_keys_report_state(ddata);
> +	if (error)
> +		return error;
>  
> +	gpio_keys_report_state(ddata);
>  	return 0;
>  }
>  #endif

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH 1/2] input: gpio-keys: Disable hardware on suspend

[Dmitry Torokhov]

On Mon, Nov 26, 2012 at 09:05:03AM +0000, Lee Jones wrote:
> > On Thu, Nov 22, 2012 at 01:23:36PM +0000, Lee Jones wrote:
> > > From: Jonas Aaberg <jonas.aberg@stericsson.com>
> > > 
> > > Disable hardware if active when suspending if the hw can not
> > > wake the system from suspend.
> > 
> > How about below instead (needs the other patch I have just sent out)?
> 
> Sorry Dmitry, I'm a little confused. What does this mean?

The modified version of the patch I have sent depends on the other patch
to gpio-keys that introduces gpio_keys_report_state() that I believe you
have been CCed.

Thanks.

-- 
Dmitry

Re: [PATCH 1/2] input: gpio-keys: Disable hardware on suspend

[Linus Walleij]

On Sun, Nov 25, 2012 at 9:32 AM, Dmitry Torokhov
<dmitry.torokhov@gmail.com> wrote:
> On Thu, Nov 22, 2012 at 01:23:36PM +0000, Lee Jones wrote:
>> From: Jonas Aaberg <jonas.aberg@stericsson.com>
>>
>> Disable hardware if active when suspending if the hw can not
>> wake the system from suspend.
>
> How about below instead (needs the other patch I have just sent out)?

LooksGoodToMe(TM)

Acked-by.

Yours,
Linus Walleij

[PATCH 1/2] input: gpio-keys: Disable hardware on suspend

[Lee Jones]

From: Jonas Aaberg <jonas.aberg@stericsson.com>

Disable hardware if active when suspending if the hw can not
wake the system from suspend.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
Reviewed-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
---
 drivers/input/keyboard/gpio_keys.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index cbb1add..7947315 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -46,6 +46,8 @@ struct gpio_keys_drvdata {
 	struct input_dev *input;
 	struct mutex disable_lock;
 	unsigned int n_buttons;
+	bool enabled;
+	bool enable_after_suspend;
 	int (*enable)(struct device *dev);
 	void (*disable)(struct device *dev);
 	struct gpio_button_data data[0];
@@ -524,6 +526,7 @@ static int gpio_keys_open(struct input_dev *input)
 {
 	struct gpio_keys_drvdata *ddata = input_get_drvdata(input);
 
+	ddata->enabled = true;
 	return ddata->enable ? ddata->enable(input->dev.parent) : 0;
 }
 
@@ -533,6 +536,7 @@ static void gpio_keys_close(struct input_dev *input)
 
 	if (ddata->disable)
 		ddata->disable(input->dev.parent);
+	ddata->enabled = false;
 }
 
 /*
@@ -674,6 +678,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 	ddata->n_buttons = pdata->nbuttons;
 	ddata->enable = pdata->enable;
 	ddata->disable = pdata->disable;
+	ddata->enabled = false;
 	mutex_init(&ddata->disable_lock);
 
 	platform_set_drvdata(pdev, ddata);
@@ -789,6 +794,10 @@ static int gpio_keys_suspend(struct device *dev)
 			if (bdata->button->wakeup)
 				enable_irq_wake(bdata->irq);
 		}
+	} else {
+		ddata->enable_after_suspend = ddata->enabled;
+		if (ddata->enabled)
+			gpio_keys_close(ddata->input);
 	}
 
 	return 0;
@@ -807,6 +816,10 @@ static int gpio_keys_resume(struct device *dev)
 		if (gpio_is_valid(bdata->button->gpio))
 			gpio_keys_gpio_report_event(bdata);
 	}
+
+	if (!device_may_wakeup(dev) && ddata->enable_after_suspend)
+		gpio_keys_open(ddata->input);
+
 	input_sync(ddata->input);
 
 	return 0;
-- 
1.7.9.5

[PATCH 2/2] input: gpio-keys: Add runtime support

[Lee Jones]

From: Jonas Aaberg <jonas.aberg@stericsson.com>

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
Reviewed-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
---
 drivers/input/keyboard/gpio_keys.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 7947315..78de557 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -29,6 +29,7 @@
 #include <linux/of_platform.h>
 #include <linux/of_gpio.h>
 #include <linux/spinlock.h>
+#include <linux/pm_runtime.h>
 
 struct gpio_button_data {
 	const struct gpio_keys_button *button;
@@ -526,6 +527,7 @@ static int gpio_keys_open(struct input_dev *input)
 {
 	struct gpio_keys_drvdata *ddata = input_get_drvdata(input);
 
+	pm_runtime_get_sync(input->dev.parent);
 	ddata->enabled = true;
 	return ddata->enable ? ddata->enable(input->dev.parent) : 0;
 }
@@ -537,6 +539,7 @@ static void gpio_keys_close(struct input_dev *input)
 	if (ddata->disable)
 		ddata->disable(input->dev.parent);
 	ddata->enabled = false;
+	pm_runtime_put(input->dev.parent);
 }
 
 /*
@@ -695,6 +698,8 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 	input->id.product = 0x0001;
 	input->id.version = 0x0100;
 
+	pm_runtime_enable(&pdev->dev);
+
 	/* Enable auto repeat feature of Linux input subsystem */
 	if (pdata->rep)
 		__set_bit(EV_REP, input->evbit);
@@ -760,6 +765,8 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev)
 	struct input_dev *input = ddata->input;
 	int i;
 
+	pm_runtime_disable(&pdev->dev);
+
 	sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group);
 
 	device_init_wakeup(&pdev->dev, 0);
@@ -796,8 +803,8 @@ static int gpio_keys_suspend(struct device *dev)
 		}
 	} else {
 		ddata->enable_after_suspend = ddata->enabled;
-		if (ddata->enabled)
-			gpio_keys_close(ddata->input);
+		if (ddata->enabled && ddata->disable)
+			ddata->disable(dev);
 	}
 
 	return 0;
@@ -817,8 +824,9 @@ static int gpio_keys_resume(struct device *dev)
 			gpio_keys_gpio_report_event(bdata);
 	}
 
-	if (!device_may_wakeup(dev) && ddata->enable_after_suspend)
-		gpio_keys_open(ddata->input);
+	if (!device_may_wakeup(dev) && ddata->enable_after_suspend
+	    && ddata->enable)
+		ddata->enable(dev);
 
 	input_sync(ddata->input);
 
-- 
1.7.9.5

Re: [PATCH 2/2] input: gpio-keys: Add runtime support

[Shubhrajyoti Datta]

On Thu, Oct 11, 2012 at 7:45 PM, Lee Jones <lee.jones@linaro.org> wrote:
> From: Jonas Aaberg <jonas.aberg@stericsson.com>
Some change logs would have helped.

>
> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> Cc: linux-input@vger.kernel.org
> Acked-by: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
> Reviewed-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
> ---
>  drivers/input/keyboard/gpio_keys.c |   16 ++++++++++++----
>  1 file changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
> index 7947315..78de557 100644
> --- a/drivers/input/keyboard/gpio_keys.c
> +++ b/drivers/input/keyboard/gpio_keys.c
> @@ -29,6 +29,7 @@
>  #include <linux/of_platform.h>
>  #include <linux/of_gpio.h>
>  #include <linux/spinlock.h>
> +#include <linux/pm_runtime.h>
>
>  struct gpio_button_data {
>         const struct gpio_keys_button *button;
> @@ -526,6 +527,7 @@ static int gpio_keys_open(struct input_dev *input)
>  {
>         struct gpio_keys_drvdata *ddata = input_get_drvdata(input);
>
> +       pm_runtime_get_sync(input->dev.parent);
I am not an expert of the runtime.

However would be grateful if you explain me what it actually do.

Also I did not see any runtime suspend/ resume handlers populated.

Re: [PATCH 2/2] input: gpio-keys: Add runtime support

[Lee Jones]

> > From: Jonas Aaberg <jonas.aberg@stericsson.com>
> Some change logs would have helped.

Granted.

Hopefully Jonas will be happy to step forward and answer any of
your following questions.

> > Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> > Cc: linux-input@vger.kernel.org
> > Acked-by: Lee Jones <lee.jones@linaro.org>
> > Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
> > Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
> > Reviewed-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
> > ---
> >  drivers/input/keyboard/gpio_keys.c |   16 ++++++++++++----
> >  1 file changed, 12 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
> > index 7947315..78de557 100644
> > --- a/drivers/input/keyboard/gpio_keys.c
> > +++ b/drivers/input/keyboard/gpio_keys.c
> > @@ -29,6 +29,7 @@
> >  #include <linux/of_platform.h>
> >  #include <linux/of_gpio.h>
> >  #include <linux/spinlock.h>
> > +#include <linux/pm_runtime.h>
> >
> >  struct gpio_button_data {
> >         const struct gpio_keys_button *button;
> > @@ -526,6 +527,7 @@ static int gpio_keys_open(struct input_dev *input)
> >  {
> >         struct gpio_keys_drvdata *ddata = input_get_drvdata(input);
> >
> > +       pm_runtime_get_sync(input->dev.parent);
> I am not an expert of the runtime.
> 
> However would be grateful if you explain me what it actually do.
> 
> Also I did not see any runtime suspend/ resume handlers populated.

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH 2/2] input: gpio-keys: Add runtime support

[Linus Walleij]

On Thu, Oct 11, 2012 at 4:22 PM, Shubhrajyoti Datta
<omaplinuxkernel@gmail.com> wrote:

>> @@ -526,6 +527,7 @@ static int gpio_keys_open(struct input_dev *input)
>>  {
>>         struct gpio_keys_drvdata *ddata = input_get_drvdata(input);
>>
>> +       pm_runtime_get_sync(input->dev.parent);
>
> I am not an expert of the runtime.
>
> However would be grateful if you explain me what it actually do.

This increase the reference count of the runtime status container
for the device. _sync makes sure it happens now.

Consult:
Documentation/power/runtime_pm.txt

> Also I did not see any runtime suspend/ resume handlers populated.

It is not necessary to handle the power state at the driver level,
it can just as well be handled by the voltage/power domain,
or at the class, type or bus level.

But the individual driver has to notify the system upward if it
needs to be powered on or when it may or must be relaxed.

Yours,
Linus Walleij

Re: [PATCH 2/2] input: gpio-keys: Add runtime support

[Lee Jones]

On Fri, 12 Oct 2012, Linus Walleij wrote:

> On Thu, Oct 11, 2012 at 4:22 PM, Shubhrajyoti Datta
> <omaplinuxkernel@gmail.com> wrote:
> 
> >> @@ -526,6 +527,7 @@ static int gpio_keys_open(struct input_dev *input)
> >>  {
> >>         struct gpio_keys_drvdata *ddata = input_get_drvdata(input);
> >>
> >> +       pm_runtime_get_sync(input->dev.parent);
> >
> > I am not an expert of the runtime.
> >
> > However would be grateful if you explain me what it actually do.
> 
> This increase the reference count of the runtime status container
> for the device. _sync makes sure it happens now.
> 
> Consult:
> Documentation/power/runtime_pm.txt
> 
> > Also I did not see any runtime suspend/ resume handlers populated.
> 
> It is not necessary to handle the power state at the driver level,
> it can just as well be handled by the voltage/power domain,
> or at the class, type or bus level.
> 
> But the individual driver has to notify the system upward if it
> needs to be powered on or when it may or must be relaxed.
>
> Yours,
> Linus Walleij

Friendly poke.

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH 2/2] input: gpio-keys: Add runtime support

[Linus Walleij]

On Thu, Oct 25, 2012 at 9:57 AM, Lee Jones <lee.jones@linaro.org> wrote:
> On Fri, 12 Oct 2012, Linus Walleij wrote:

>> Yours,
>> Linus Walleij
>
> Friendly poke.

This makes it look like you're poking me as I'm in the To: field but I suspect
the intent must be to poke Dmitry ... I was just providing background
for Shubhrajyoti's question.

Maybe this helps:
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

Re: [PATCH 2/2] input: gpio-keys: Add runtime support

[Lee Jones]

On Thu, 25 Oct 2012, Linus Walleij wrote:

> On Thu, Oct 25, 2012 at 9:57 AM, Lee Jones <lee.jones@linaro.org> wrote:
> > On Fri, 12 Oct 2012, Linus Walleij wrote:
> 
> >> Yours,
> >> Linus Walleij
> >
> > Friendly poke.
> 
> This makes it look like you're poking me as I'm in the To: field but I suspect
> the intent must be to poke Dmitry ... I was just providing background
> for Shubhrajyoti's question.
> 
> Maybe this helps:
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yes, that was also the intention of the other poke. Sorry about
that, I should have moved you into Cc: instead.

Yes, the poke was for Dmitry.

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH 2/2] input: gpio-keys: Add runtime support

[Dmitry Torokhov]

On Thu, Oct 25, 2012 at 09:21:45AM +0100, Lee Jones wrote:
> On Thu, 25 Oct 2012, Linus Walleij wrote:
> 
> > On Thu, Oct 25, 2012 at 9:57 AM, Lee Jones <lee.jones@linaro.org> wrote:
> > > On Fri, 12 Oct 2012, Linus Walleij wrote:
> > 
> > >> Yours,
> > >> Linus Walleij
> > >
> > > Friendly poke.
> > 
> > This makes it look like you're poking me as I'm in the To: field but I suspect
> > the intent must be to poke Dmitry ... I was just providing background
> > for Shubhrajyoti's question.
> > 
> > Maybe this helps:
> > Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> 
> Yes, that was also the intention of the other poke. Sorry about
> that, I should have moved you into Cc: instead.
> 
> Yes, the poke was for Dmitry.

Still do not have the right signoffs: person who sends me the patch needs
to put signed-off-by, not acked-by.

Thanks.

-- 
Dmitry

Re: [PATCH 2/2] input: gpio-keys: Add runtime support

[Lee Jones]

On Thu, 25 Oct 2012, Dmitry Torokhov wrote:

> On Thu, Oct 25, 2012 at 09:21:45AM +0100, Lee Jones wrote:
> > On Thu, 25 Oct 2012, Linus Walleij wrote:
> > 
> > > On Thu, Oct 25, 2012 at 9:57 AM, Lee Jones <lee.jones@linaro.org> wrote:
> > > > On Fri, 12 Oct 2012, Linus Walleij wrote:
> > > 
> > > >> Yours,
> > > >> Linus Walleij
> > > >
> > > > Friendly poke.
> > > 
> > > This makes it look like you're poking me as I'm in the To: field but I suspect
> > > the intent must be to poke Dmitry ... I was just providing background
> > > for Shubhrajyoti's question.
> > > 
> > > Maybe this helps:
> > > Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> > 
> > Yes, that was also the intention of the other poke. Sorry about
> > that, I should have moved you into Cc: instead.
> > 
> > Yes, the poke was for Dmitry.
> 
> Still do not have the right signoffs: person who sends me the patch needs
> to put signed-off-by, not acked-by.

My apologies.

Signed-off-by: Lee Jones <lee.jones@linaro.org>

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog