From: "Radim Krčmář" <rkrcmar@redhat.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: Feng Wu <feng.wu@intel.com>,
tglx@linutronix.de, mingo@redhat.com, hpa@zytor.com,
x86@kernel.org, gleb@kernel.org, dwmw2@infradead.org,
joro@8bytes.org, alex.williamson@redhat.com,
jiang.liu@linux.intel.com, eric.auger@linaro.org,
linux-kernel@vger.kernel.org, iommu@lists.linux-foundation.org,
kvm@vger.kernel.org
Subject: Re: [v3 13/26] KVM: Define a new interface kvm_find_dest_vcpu() for VT-d PI
Date: Fri, 9 Jan 2015 16:47:48 +0100 [thread overview]
Message-ID: <20150109154748.GD9877@potion.brq.redhat.com> (raw)
In-Reply-To: <54AFF128.1080603@redhat.com>
2015-01-09 16:18+0100, Paolo Bonzini:
> On 09/01/2015 16:12, Radim Krčmář wrote:
> > > The chipset doesn't support it. :(
> >
> > I meant that we need to recompute PI entries for lowest priority
> > interrupts every time guest's TPR changes.
> >
> > Luckily, Linux doesn't use TPR, but other OS might be a reason to drop
> > lowest priority from PI optimizations. (Or make it more complicated.)
>
> Doing vector hashing is a possibility as well. I would like to know
> what existing chipsets do in practice, then we can mimic it.
When looking at /proc/interrupts from time to time, I have only seen
interrupts landing on the first CPU of the set.
We could also distinguish between AMD and Intel ...
AMD should deliver to the highest APIC ID.
(If we still need to decide after focus processor and APR checks.)
I'll try to check using a more trustworthy approach.
next prev parent reply other threads:[~2015-01-09 15:48 UTC|newest]
Thread overview: 141+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-12 15:14 [v3 00/26] Add VT-d Posted-Interrupts support Feng Wu
2014-12-12 15:14 ` [v3 01/26] genirq: Introduce irq_set_vcpu_affinity() to target an interrupt to a VCPU Feng Wu
2014-12-12 15:14 ` [v3 02/26] iommu: Add new member capability to struct irq_remap_ops Feng Wu
2015-01-28 15:22 ` David Woodhouse
2015-01-29 8:34 ` Wu, Feng
2014-12-12 15:14 ` [v3 03/26] iommu, x86: Define new irte structure for VT-d Posted-Interrupts Feng Wu
2015-01-28 15:26 ` David Woodhouse
2014-12-12 15:14 ` [v3 04/26] iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip Feng Wu
2015-01-28 15:26 ` David Woodhouse
2015-01-29 7:55 ` Wu, Feng
2014-12-12 15:14 ` [v3 05/26] x86, irq: Implement irq_set_vcpu_affinity for pci_msi_ir_controller Feng Wu
2014-12-12 15:14 ` [v3 06/26] iommu, x86: No need to migrating irq for VT-d Posted-Interrupts Feng Wu
2014-12-18 14:26 ` Zhang, Yang Z
2014-12-19 1:40 ` Wu, Feng
2014-12-19 1:46 ` Zhang, Yang Z
2014-12-19 11:59 ` Paolo Bonzini
2014-12-23 0:37 ` Zhang, Yang Z
2014-12-23 8:47 ` Paolo Bonzini
2014-12-23 9:07 ` Wu, Feng
2014-12-23 9:34 ` Paolo Bonzini
2014-12-24 1:38 ` Zhang, Yang Z
2014-12-24 2:12 ` Jiang Liu
2014-12-24 2:32 ` Zhang, Yang Z
2014-12-24 3:08 ` Wu, Feng
2014-12-24 4:04 ` Zhang, Yang Z
2014-12-24 4:54 ` Jiang Liu
2015-01-28 15:29 ` David Woodhouse
2014-12-12 15:14 ` [v3 07/26] iommu, x86: Add cap_pi_support() to detect VT-d PI capability Feng Wu
2015-01-28 15:32 ` David Woodhouse
2014-12-12 15:14 ` [v3 08/26] iommu, x86: Add intel_irq_remapping_capability() for Intel Feng Wu
2015-01-28 15:37 ` David Woodhouse
2015-01-29 8:57 ` Wu, Feng
2014-12-12 15:14 ` [v3 09/26] iommu, x86: define irq_remapping_cap() Feng Wu
2014-12-12 15:14 ` [v3 10/26] KVM: change struct pi_desc for VT-d Posted-Interrupts Feng Wu
2014-12-12 15:14 ` [v3 11/26] KVM: Add some helper functions for Posted-Interrupts Feng Wu
2014-12-12 15:14 ` [v3 12/26] KVM: Initialize VT-d Posted-Interrupts Descriptor Feng Wu
2014-12-18 15:19 ` Zhang, Yang Z
2014-12-12 15:14 ` [v3 13/26] KVM: Define a new interface kvm_find_dest_vcpu() for VT-d PI Feng Wu
2014-12-18 14:49 ` Zhang, Yang Z
2014-12-18 16:58 ` Paolo Bonzini
2014-12-19 1:13 ` Zhang, Yang Z
2014-12-19 1:30 ` Wu, Feng
2014-12-19 1:30 ` Wu, Feng
2014-12-19 1:47 ` Zhang, Yang Z
2014-12-19 11:59 ` Paolo Bonzini
2014-12-19 23:48 ` Wu, Feng
2014-12-20 13:16 ` Paolo Bonzini
2014-12-22 4:48 ` Wu, Feng
2014-12-22 9:27 ` Paolo Bonzini
2014-12-22 11:04 ` Wu, Feng
2014-12-22 11:06 ` Paolo Bonzini
2014-12-22 11:17 ` Wu, Feng
2014-12-22 11:23 ` Paolo Bonzini
2014-12-22 14:13 ` Yong Wang
2015-01-09 14:54 ` Radim Krčmář
2015-01-09 14:56 ` Paolo Bonzini
2015-01-09 15:12 ` Radim Krčmář
2015-01-09 15:18 ` Paolo Bonzini
2015-01-09 15:47 ` Radim Krčmář [this message]
2015-01-13 0:27 ` Wu, Feng
2015-01-13 16:17 ` Radim Kr?má?
2015-01-14 1:27 ` Wu, Feng
2015-01-14 13:02 ` Paolo Bonzini
2015-01-14 16:59 ` Radim Kr?má?
2015-01-20 21:04 ` Nadav Amit
2015-01-21 21:16 ` Radim Kr?má?
2014-12-12 15:14 ` [v3 14/26] KVM: Get Posted-Interrupts descriptor address from struct kvm_vcpu Feng Wu
2014-12-12 15:14 ` [v3 15/26] KVM: add interfaces to control PI outside vmx Feng Wu
2014-12-12 15:14 ` [v3 16/26] KVM: Make struct kvm_irq_routing_table accessible Feng Wu
2014-12-17 16:17 ` Paolo Bonzini
2014-12-19 2:19 ` Wu, Feng
2014-12-19 11:59 ` Paolo Bonzini
2014-12-19 23:39 ` Wu, Feng
2014-12-12 15:14 ` [v3 17/26] KVM: make kvm_set_msi_irq() public Feng Wu
2014-12-17 17:32 ` Paolo Bonzini
2014-12-12 15:14 ` [v3 18/26] KVM: kvm-vfio: User API for VT-d Posted-Interrupts Feng Wu
2014-12-12 15:14 ` [v3 19/26] KVM: kvm-vfio: implement the VFIO skeleton " Feng Wu
2014-12-12 15:14 ` [v3 20/26] KVM: x86: kvm-vfio: VT-d posted-interrupts setup Feng Wu
2014-12-12 15:14 ` [v3 21/26] x86, irq: Define a global vector for VT-d Posted-Interrupts Feng Wu
2014-12-18 14:54 ` Zhang, Yang Z
2014-12-19 0:52 ` Wu, Feng
2015-01-30 18:18 ` H. Peter Anvin
2015-02-02 1:06 ` Wu, Feng
2015-02-23 22:04 ` Marcelo Tosatti
2014-12-12 15:14 ` [v3 22/26] KVM: Define a wakeup worker thread for vCPU Feng Wu
2014-12-12 15:14 ` [v3 23/26] KVM: Update Posted-Interrupts Descriptor when vCPU is preempted Feng Wu
2014-12-17 17:11 ` Paolo Bonzini
2014-12-18 3:15 ` Wu, Feng
2014-12-18 8:32 ` Paolo Bonzini
2014-12-19 2:09 ` Wu, Feng
2015-02-23 22:21 ` Marcelo Tosatti
2015-03-02 9:12 ` Wu, Feng
2014-12-12 15:14 ` [v3 24/26] KVM: Update Posted-Interrupts Descriptor when vCPU is blocked Feng Wu
2014-12-17 17:09 ` Paolo Bonzini
2014-12-18 3:16 ` Wu, Feng
2014-12-18 8:37 ` Paolo Bonzini
2014-12-19 2:51 ` Wu, Feng
2015-02-25 21:50 ` Marcelo Tosatti
2015-02-26 8:08 ` Wu, Feng
2015-02-26 23:41 ` Marcelo Tosatti
2015-02-26 23:40 ` Marcelo Tosatti
2015-03-02 13:36 ` Wu, Feng
2015-03-04 12:06 ` Marcelo Tosatti
2015-03-06 6:51 ` Wu, Feng
2015-03-12 1:15 ` Marcelo Tosatti
2015-03-16 11:42 ` Wu, Feng
2015-03-25 23:17 ` Marcelo Tosatti
2015-03-27 6:34 ` Wu, Feng
2015-03-27 19:30 ` Marcelo Tosatti
2015-03-30 4:46 ` Wu, Feng
2015-03-30 23:55 ` Marcelo Tosatti
2015-03-31 1:13 ` Wu, Feng
2015-04-14 7:37 ` Wu, Feng
2015-06-05 21:59 ` Marcelo Tosatti
2015-06-08 1:43 ` Wu, Feng
2014-12-12 15:14 ` [v3 25/26] KVM: Suppress posted-interrupt when 'SN' is set Feng Wu
2014-12-17 17:42 ` Paolo Bonzini
2014-12-18 3:14 ` Wu, Feng
2014-12-18 8:38 ` Paolo Bonzini
2014-12-18 15:09 ` Zhang, Yang Z
2014-12-19 2:58 ` Wu, Feng
2014-12-19 3:32 ` Zhang, Yang Z
2014-12-19 4:34 ` Wu, Feng
2014-12-19 4:44 ` Zhang, Yang Z
2014-12-19 4:49 ` Wu, Feng
2014-12-19 5:25 ` Zhang, Yang Z
2014-12-19 5:46 ` Wu, Feng
2014-12-19 7:04 ` Zhang, Yang Z
2014-12-19 12:00 ` Paolo Bonzini
2014-12-19 23:34 ` Wu, Feng
2014-12-12 15:15 ` [v3 26/26] iommu/vt-d: Add a command line parameter for VT-d posted-interrupts Feng Wu
2015-01-28 15:39 ` David Woodhouse
2014-12-16 9:04 ` [v3 00/26] Add VT-d Posted-Interrupts support Wu, Feng
2015-01-06 1:10 ` Wu, Feng
2015-01-09 12:46 ` joro
2015-01-09 13:58 ` Wu, Feng
2015-01-21 2:25 ` Wu, Feng
2015-01-28 3:01 ` Wu, Feng
2015-01-28 3:44 ` Alex Williamson
2015-01-28 4:44 ` Wu, Feng
[not found] <1415059685.1337085.1419266271242.JavaMail.zimbra@zmail13.collab.prod.int.phx2.redhat.com>
2014-12-23 0:46 ` [v3 13/26] KVM: Define a new interface kvm_find_dest_vcpu() for VT-d PI Zhang, Yang Z
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150109154748.GD9877@potion.brq.redhat.com \
--to=rkrcmar@redhat.com \
--cc=alex.williamson@redhat.com \
--cc=dwmw2@infradead.org \
--cc=eric.auger@linaro.org \
--cc=feng.wu@intel.com \
--cc=gleb@kernel.org \
--cc=hpa@zytor.com \
--cc=iommu@lists.linux-foundation.org \
--cc=jiang.liu@linux.intel.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=pbonzini@redhat.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).