linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Zhang, Yang Z" <yang.z.zhang@intel.com>
To: "Wu, Feng" <feng.wu@intel.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	"kvm@vger.kernel.org" <kvm@vger.kernel.org>
Cc: "iommu@lists.linux-foundation.org"
	<iommu@lists.linux-foundation.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"kvm@vger.kernel.org" <kvm@vger.kernel.org>
Subject: RE: [v3 25/26] KVM: Suppress posted-interrupt when 'SN' is set
Date: Fri, 19 Dec 2014 05:25:44 +0000	[thread overview]
Message-ID: <A9667DDFB95DB7438FA9D7D576C3D87E0AC050B1@SHSMSX104.ccr.corp.intel.com> (raw)
In-Reply-To: <E959C4978C3B6342920538CF579893F00230AE04@SHSMSX104.ccr.corp.intel.com>

Wu, Feng wrote on 2014-12-19:
> 
> 
> Zhang, Yang Z wrote on 2014-12-19:
>> Subject: RE: [v3 25/26] KVM: Suppress posted-interrupt when 'SN' is
>> set
>> 
>> Wu, Feng wrote on 2014-12-19:
>>> 
>>> 
>>> Zhang, Yang Z wrote on 2014-12-19:
>>>> Subject: RE: [v3 25/26] KVM: Suppress posted-interrupt when 'SN'
>>>> is set
>>>> 
>>>> Wu, Feng wrote on 2014-12-19:
>>>>> 
>>>>> 
>>>>> iommu-bounces@lists.linux-foundation.org wrote on
>>>> mailto:iommu-bounces@lists.linux-foundation.org] On Behalf Of:
>>>>>> Cc: iommu@lists.linux-foundation.org;
>>>>>> linux-kernel@vger.kernel.org; kvm@vger.kernel.org
>>>>>> Subject: RE: [v3 25/26] KVM: Suppress posted-interrupt when 'SN'
>>>>>> is set
>>>>>> 
>>>>>> Paolo Bonzini wrote on 2014-12-18:
>>>>>>> 
>>>>>>> 
>>>>>>> On 18/12/2014 04:14, Wu, Feng wrote:
>>>>>>>> 
>>>>>>>> 
>>>>>>>> linux-kernel-owner@vger.kernel.org wrote on
>>>>>> mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of Paolo:
>>>>>>>>> x86@kernel.org; Gleb Natapov; Paolo Bonzini;
>>>>>>>>> dwmw2@infradead.org;
>>>>>>>>> joro-zLv9SwRftAIdnm+yROfE0A@public.gmane.org; Alex Williamson;
>>>>>>>>> joro-zLv9SwRftAIdnm+Jiang Liu Cc:
>>>>>>>>> iommu@lists.linux-foundation.org;
>>>>>>>>> linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; KVM list;
>>>>>>>>> Eric Auger Subject: Re: [v3 25/26] KVM: Suppress
>>>>>>>>> posted-interrupt when 'SN' is set
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> On 12/12/2014 16:14, Feng Wu wrote:
>>>>>>>>>> Currently, we don't support urgent interrupt, all
>>>>>>>>>> interrupts are recognized as non-urgent interrupt, so we
>>>>>>>>>> cannot send posted-interrupt when 'SN' is set.
>>>>>>>>> 
>>>>>>>>> Can this happen?  If the vcpu is in guest mode, it cannot
>>>>>>>>> have been scheduled out, and that's the only case when SN is set.
>>>>>>>>> 
>>>>>>>>> Paolo
>>>>>>>> 
>>>>>>>> Currently, the only place where SN is set is vCPU is
>>>>>>>> preempted and
>>>>>> 
>>>>>> If the vCPU is preempted, shouldn't the subsequent be ignored?
>>>>>> What happens if a PI is occurs when vCPU is preempted?
>>>>> 
>>>>> If a vCPU is preempted, the 'SN' bit is set, the subsequent
>>>>> interrupts are suppressed for posting.
>>>> 
>>>> I mean what happens if we don't set SN bit. From my point, if
>>>> preempter already disabled the interrupt, it is ok to leave SN
>>>> bit as zero. But if preempter enabled the interrupt, doesn't this
>>>> mean he allow interrupt to happen? BTW, since there already has
>>>> ON bit, so this means there only have one interrupt arrived at
>>>> most and it doesn't hurt performance. Do we really need to set SN bit?
>>> 
>>> 
>>> See this scenario:
>>> vCPU0 is running on pCPU0
>>> --> vCPU0 is preempted by vCPU1
>>> --> Then vCPU1 is running on pCPU0 and vCPU0 is waiting for
>>> --> schedule in runqueue
>>> 
>>> If the we don't set SN for vCPU0, then all subsequent interrupts
>>> for
>>> vCPU0 is posted to vCPU1, this will consume hardware and software
>> 
>> The PI vector for vCPU1 is notification vector, but the PI vector
>> for
>> vCPU0 should be wakeup vector. Why vCPU1 will consume this PI event?
> 
> Wakeup vector is only used for blocking case, when vCPU is preempted
> and waiting in the runqueue, the NV is the notification vector.

I see your point. But from performance point, if we can schedule the vCPU to another PCPU to handle the interrupt, it would helpful. But I remember current KVM will not schedule the vCPU in run queue (even though it got preempted) to another pCPU to run(Am I right?). So it may hard to do it.

> 
> Thanks,
> Feng
> 
>> 
>>> efforts and in fact it is not needed at all. If SN is set for
>>> vCPU0, VT-d hardware will not issue Notification Event for vCPU0
>>> when an interrupt is for it, but just setting the related PIR bit.
>>> 
>>> Thanks,
>>> Feng
>>> 
>>>> 
>>>>> 
>>>>> Thanks,
>>>>> Feng
>>>>> 
>>>>>> 
>>>>>>>> waiting for the next scheduling in the runqueue. But I am not
>>>>>>>> sure whether we need to set SN for other purpose in future.
>>>>>>>> Adding SN checking here is just to follow the Spec.
>>>>>>>> non-urgent interrupts are suppressed
>>>>>>> when SN is set.
>>>>>>> 
>>>>>>> I would change that to a WARN_ON_ONCE then.
>>>>>> 
>>>>>> 
>>>>>> Best regards,
>>>>>> Yang
>>>>>> 
>>>>>> 
>>>>>> _______________________________________________
>>>>>> iommu mailing list
>>>>>> iommu@lists.linux-foundation.org
>>>>>> https://lists.linuxfoundation.org/mailman/listinfo/iommu
>>>> 
>>>> 
>>>> Best regards,
>>>> Yang
>>>> 
>> 
>> 
>> Best regards,
>> Yang
>>


Best regards,
Yang



  reply	other threads:[~2014-12-19  5:26 UTC|newest]

Thread overview: 140+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-12 15:14 [v3 00/26] Add VT-d Posted-Interrupts support Feng Wu
2014-12-12 15:14 ` [v3 01/26] genirq: Introduce irq_set_vcpu_affinity() to target an interrupt to a VCPU Feng Wu
2014-12-12 15:14 ` [v3 02/26] iommu: Add new member capability to struct irq_remap_ops Feng Wu
2015-01-28 15:22   ` David Woodhouse
2015-01-29  8:34     ` Wu, Feng
2014-12-12 15:14 ` [v3 03/26] iommu, x86: Define new irte structure for VT-d Posted-Interrupts Feng Wu
2015-01-28 15:26   ` David Woodhouse
2014-12-12 15:14 ` [v3 04/26] iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip Feng Wu
2015-01-28 15:26   ` David Woodhouse
2015-01-29  7:55     ` Wu, Feng
2014-12-12 15:14 ` [v3 05/26] x86, irq: Implement irq_set_vcpu_affinity for pci_msi_ir_controller Feng Wu
2014-12-12 15:14 ` [v3 06/26] iommu, x86: No need to migrating irq for VT-d Posted-Interrupts Feng Wu
2014-12-18 14:26   ` Zhang, Yang Z
2014-12-19  1:40     ` Wu, Feng
2014-12-19  1:46       ` Zhang, Yang Z
2014-12-19 11:59         ` Paolo Bonzini
2014-12-23  0:37           ` Zhang, Yang Z
2014-12-23  8:47             ` Paolo Bonzini
2014-12-23  9:07               ` Wu, Feng
2014-12-23  9:34                 ` Paolo Bonzini
2014-12-24  1:38                   ` Zhang, Yang Z
2014-12-24  2:12                     ` Jiang Liu
2014-12-24  2:32                       ` Zhang, Yang Z
2014-12-24  3:08                         ` Wu, Feng
2014-12-24  4:04                           ` Zhang, Yang Z
2014-12-24  4:54                         ` Jiang Liu
2015-01-28 15:29   ` David Woodhouse
2014-12-12 15:14 ` [v3 07/26] iommu, x86: Add cap_pi_support() to detect VT-d PI capability Feng Wu
2015-01-28 15:32   ` David Woodhouse
2014-12-12 15:14 ` [v3 08/26] iommu, x86: Add intel_irq_remapping_capability() for Intel Feng Wu
2015-01-28 15:37   ` David Woodhouse
2015-01-29  8:57     ` Wu, Feng
2014-12-12 15:14 ` [v3 09/26] iommu, x86: define irq_remapping_cap() Feng Wu
2014-12-12 15:14 ` [v3 10/26] KVM: change struct pi_desc for VT-d Posted-Interrupts Feng Wu
2014-12-12 15:14 ` [v3 11/26] KVM: Add some helper functions for Posted-Interrupts Feng Wu
2014-12-12 15:14 ` [v3 12/26] KVM: Initialize VT-d Posted-Interrupts Descriptor Feng Wu
2014-12-18 15:19   ` Zhang, Yang Z
2014-12-12 15:14 ` [v3 13/26] KVM: Define a new interface kvm_find_dest_vcpu() for VT-d PI Feng Wu
2014-12-18 14:49   ` Zhang, Yang Z
2014-12-18 16:58     ` Paolo Bonzini
2014-12-19  1:13       ` Zhang, Yang Z
2014-12-19  1:30         ` Wu, Feng
2014-12-19  1:30       ` Wu, Feng
2014-12-19  1:47         ` Zhang, Yang Z
2014-12-19 11:59         ` Paolo Bonzini
2014-12-19 23:48           ` Wu, Feng
2014-12-20 13:16             ` Paolo Bonzini
2014-12-22  4:48               ` Wu, Feng
2014-12-22  9:27                 ` Paolo Bonzini
2014-12-22 11:04                   ` Wu, Feng
2014-12-22 11:06                     ` Paolo Bonzini
2014-12-22 11:17                       ` Wu, Feng
2014-12-22 11:23                         ` Paolo Bonzini
2014-12-22 14:13                           ` Yong Wang
2015-01-09 14:54   ` Radim Krčmář
2015-01-09 14:56     ` Paolo Bonzini
2015-01-09 15:12       ` Radim Krčmář
2015-01-09 15:18         ` Paolo Bonzini
2015-01-09 15:47           ` Radim Krčmář
2015-01-13  0:27       ` Wu, Feng
2015-01-13 16:17         ` Radim Kr?má?
2015-01-14  1:27           ` Wu, Feng
2015-01-14 13:02             ` Paolo Bonzini
2015-01-14 16:59             ` Radim Kr?má?
2015-01-20 21:04               ` Nadav Amit
2015-01-21 21:16                 ` Radim Kr?má?
2014-12-12 15:14 ` [v3 14/26] KVM: Get Posted-Interrupts descriptor address from struct kvm_vcpu Feng Wu
2014-12-12 15:14 ` [v3 15/26] KVM: add interfaces to control PI outside vmx Feng Wu
2014-12-12 15:14 ` [v3 16/26] KVM: Make struct kvm_irq_routing_table accessible Feng Wu
2014-12-17 16:17   ` Paolo Bonzini
2014-12-19  2:19     ` Wu, Feng
2014-12-19 11:59       ` Paolo Bonzini
2014-12-19 23:39         ` Wu, Feng
2014-12-12 15:14 ` [v3 17/26] KVM: make kvm_set_msi_irq() public Feng Wu
2014-12-17 17:32   ` Paolo Bonzini
2014-12-12 15:14 ` [v3 18/26] KVM: kvm-vfio: User API for VT-d Posted-Interrupts Feng Wu
2014-12-12 15:14 ` [v3 19/26] KVM: kvm-vfio: implement the VFIO skeleton " Feng Wu
2014-12-12 15:14 ` [v3 20/26] KVM: x86: kvm-vfio: VT-d posted-interrupts setup Feng Wu
2014-12-12 15:14 ` [v3 21/26] x86, irq: Define a global vector for VT-d Posted-Interrupts Feng Wu
2014-12-18 14:54   ` Zhang, Yang Z
2014-12-19  0:52     ` Wu, Feng
2015-01-30 18:18   ` H. Peter Anvin
2015-02-02  1:06     ` Wu, Feng
2015-02-23 22:04   ` Marcelo Tosatti
2014-12-12 15:14 ` [v3 22/26] KVM: Define a wakeup worker thread for vCPU Feng Wu
2014-12-12 15:14 ` [v3 23/26] KVM: Update Posted-Interrupts Descriptor when vCPU is preempted Feng Wu
2014-12-17 17:11   ` Paolo Bonzini
2014-12-18  3:15     ` Wu, Feng
2014-12-18  8:32       ` Paolo Bonzini
2014-12-19  2:09         ` Wu, Feng
2015-02-23 22:21   ` Marcelo Tosatti
2015-03-02  9:12     ` Wu, Feng
2014-12-12 15:14 ` [v3 24/26] KVM: Update Posted-Interrupts Descriptor when vCPU is blocked Feng Wu
2014-12-17 17:09   ` Paolo Bonzini
2014-12-18  3:16     ` Wu, Feng
2014-12-18  8:37       ` Paolo Bonzini
2014-12-19  2:51         ` Wu, Feng
2015-02-25 21:50   ` Marcelo Tosatti
2015-02-26  8:08     ` Wu, Feng
2015-02-26 23:41       ` Marcelo Tosatti
2015-02-26 23:40   ` Marcelo Tosatti
2015-03-02 13:36     ` Wu, Feng
2015-03-04 12:06       ` Marcelo Tosatti
2015-03-06  6:51         ` Wu, Feng
2015-03-12  1:15           ` Marcelo Tosatti
2015-03-16 11:42             ` Wu, Feng
2015-03-25 23:17               ` Marcelo Tosatti
2015-03-27  6:34                 ` Wu, Feng
2015-03-27 19:30                   ` Marcelo Tosatti
2015-03-30  4:46                     ` Wu, Feng
2015-03-30 23:55                       ` Marcelo Tosatti
2015-03-31  1:13                         ` Wu, Feng
2015-04-14  7:37                         ` Wu, Feng
2015-06-05 21:59                           ` Marcelo Tosatti
2015-06-08  1:43                             ` Wu, Feng
2014-12-12 15:14 ` [v3 25/26] KVM: Suppress posted-interrupt when 'SN' is set Feng Wu
2014-12-17 17:42   ` Paolo Bonzini
2014-12-18  3:14     ` Wu, Feng
2014-12-18  8:38       ` Paolo Bonzini
2014-12-18 15:09         ` Zhang, Yang Z
2014-12-19  2:58           ` Wu, Feng
2014-12-19  3:32             ` Zhang, Yang Z
2014-12-19  4:34               ` Wu, Feng
2014-12-19  4:44                 ` Zhang, Yang Z
2014-12-19  4:49                   ` Wu, Feng
2014-12-19  5:25                     ` Zhang, Yang Z [this message]
2014-12-19  5:46                       ` Wu, Feng
2014-12-19  7:04                         ` Zhang, Yang Z
2014-12-19 12:00                       ` Paolo Bonzini
2014-12-19 23:34                         ` Wu, Feng
2014-12-12 15:15 ` [v3 26/26] iommu/vt-d: Add a command line parameter for VT-d posted-interrupts Feng Wu
2015-01-28 15:39   ` David Woodhouse
2014-12-16  9:04 ` [v3 00/26] Add VT-d Posted-Interrupts support Wu, Feng
2015-01-06  1:10 ` Wu, Feng
2015-01-09 12:46   ` joro
2015-01-09 13:58     ` Wu, Feng
2015-01-21  2:25 ` Wu, Feng
2015-01-28  3:01   ` Wu, Feng
2015-01-28  3:44     ` Alex Williamson
2015-01-28  4:44       ` Wu, Feng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=A9667DDFB95DB7438FA9D7D576C3D87E0AC050B1@SHSMSX104.ccr.corp.intel.com \
    --to=yang.z.zhang@intel.com \
    --cc=feng.wu@intel.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).