* [PATCH] Input: sun4i-ts: add thermal driver dependency @ 2015-01-28 15:17 Arnd Bergmann 2015-01-29 7:50 ` Hans de Goede 0 siblings, 1 reply; 7+ messages in thread From: Arnd Bergmann @ 2015-01-28 15:17 UTC (permalink / raw) To: Dmitry Torokhov Cc: Hans de Goede, linux-input, linux-kernel, linux-arm-kernel, Chen-Yu Tsai The sun4i-ts driver has had a dependency on the thermal code since it was first merged, but this is not currently enforced in Kconfig, so in some randconfig builds we get drivers/built-in.o: In function `sun4i_ts_remove': :(.text+0x2376f4): undefined reference to `thermal_zone_of_sensor_unregister' drivers/built-in.o: In function `sun4i_ts_probe': :(.text+0x237a94): undefined reference to `thermal_zone_of_sensor_register' :(.text+0x237c00): undefined reference to `thermal_zone_of_sensor_unregister' We need the dependency on THERMAL in order to ensure that this driver becomes a loadable module if the thermal support itself is modular, while the dependency on THERMAL_OF is a runtime dependency and the driver will still build but not work if it is missing. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 6decea7c5438e2 ("Input: add driver for Allwinner sunxi SoC's rtp controller") diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 58917525126e..e2447f0063b7 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -943,6 +943,8 @@ config TOUCHSCREEN_SUN4I tristate "Allwinner sun4i resistive touchscreen controller support" depends on ARCH_SUNXI || COMPILE_TEST depends on HWMON + depends on THERMAL + depends on THERMAL_OF || COMPILE_TEST help This selects support for the resistive touchscreen controller found on Allwinner sunxi SoCs. ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH] Input: sun4i-ts: add thermal driver dependency 2015-01-28 15:17 [PATCH] Input: sun4i-ts: add thermal driver dependency Arnd Bergmann @ 2015-01-29 7:50 ` Hans de Goede 2015-01-29 18:51 ` Dmitry Torokhov 0 siblings, 1 reply; 7+ messages in thread From: Hans de Goede @ 2015-01-29 7:50 UTC (permalink / raw) To: Arnd Bergmann, Dmitry Torokhov Cc: linux-input, linux-kernel, linux-arm-kernel, Chen-Yu Tsai Hi, On 28-01-15 16:17, Arnd Bergmann wrote: > The sun4i-ts driver has had a dependency on the thermal code > since it was first merged, The "since it was first merged bit" is not true, this is caused by recent changes by ChenYu. Other then that no objections from me against the proposed fix. Regards, Hans but this is not currently enforced > in Kconfig, so in some randconfig builds we get > > drivers/built-in.o: In function `sun4i_ts_remove': > :(.text+0x2376f4): undefined reference to `thermal_zone_of_sensor_unregister' > drivers/built-in.o: In function `sun4i_ts_probe': > :(.text+0x237a94): undefined reference to `thermal_zone_of_sensor_register' > :(.text+0x237c00): undefined reference to `thermal_zone_of_sensor_unregister' > > We need the dependency on THERMAL in order to ensure that this > driver becomes a loadable module if the thermal support itself > is modular, while the dependency on THERMAL_OF is a runtime dependency > and the driver will still build but not work if it is missing. > > Signed-off-by: Arnd Bergmann <arnd@arndb.de> > Fixes: 6decea7c5438e2 ("Input: add driver for Allwinner sunxi SoC's rtp controller") > > diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig > index 58917525126e..e2447f0063b7 100644 > --- a/drivers/input/touchscreen/Kconfig > +++ b/drivers/input/touchscreen/Kconfig > @@ -943,6 +943,8 @@ config TOUCHSCREEN_SUN4I > tristate "Allwinner sun4i resistive touchscreen controller support" > depends on ARCH_SUNXI || COMPILE_TEST > depends on HWMON > + depends on THERMAL > + depends on THERMAL_OF || COMPILE_TEST > help > This selects support for the resistive touchscreen controller > found on Allwinner sunxi SoCs. > ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] Input: sun4i-ts: add thermal driver dependency 2015-01-29 7:50 ` Hans de Goede @ 2015-01-29 18:51 ` Dmitry Torokhov 2015-02-11 18:24 ` Dmitry Torokhov 2015-02-12 7:42 ` Chen-Yu Tsai 0 siblings, 2 replies; 7+ messages in thread From: Dmitry Torokhov @ 2015-01-29 18:51 UTC (permalink / raw) To: Hans de Goede Cc: Arnd Bergmann, linux-input, linux-kernel, linux-arm-kernel, Chen-Yu Tsai On Thu, Jan 29, 2015 at 08:50:18AM +0100, Hans de Goede wrote: > Hi, > > On 28-01-15 16:17, Arnd Bergmann wrote: > >The sun4i-ts driver has had a dependency on the thermal code > >since it was first merged, > > The "since it was first merged bit" is not true, this is caused > by recent changes by ChenYu. > > Other then that no objections from me against the proposed fix. > > Regards, > > Hans > > > but this is not currently enforced > >in Kconfig, so in some randconfig builds we get > > > >drivers/built-in.o: In function `sun4i_ts_remove': > >:(.text+0x2376f4): undefined reference to `thermal_zone_of_sensor_unregister' > >drivers/built-in.o: In function `sun4i_ts_probe': > >:(.text+0x237a94): undefined reference to `thermal_zone_of_sensor_register' > >:(.text+0x237c00): undefined reference to `thermal_zone_of_sensor_unregister' > > > >We need the dependency on THERMAL in order to ensure that this > >driver becomes a loadable module if the thermal support itself > >is modular, while the dependency on THERMAL_OF is a runtime dependency > >and the driver will still build but not work if it is missing. > > > >Signed-off-by: Arnd Bergmann <arnd@arndb.de> > >Fixes: 6decea7c5438e2 ("Input: add driver for Allwinner sunxi SoC's rtp controller") > > > >diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig > >index 58917525126e..e2447f0063b7 100644 > >--- a/drivers/input/touchscreen/Kconfig > >+++ b/drivers/input/touchscreen/Kconfig > >@@ -943,6 +943,8 @@ config TOUCHSCREEN_SUN4I > > tristate "Allwinner sun4i resistive touchscreen controller support" > > depends on ARCH_SUNXI || COMPILE_TEST > > depends on HWMON > >+ depends on THERMAL > >+ depends on THERMAL_OF || COMPILE_TEST THERMAL_OF does have proper stubs and I do not see why we need to force having TERMAL even if we don't do compile test. Should the dependency be: depends on !THERMAL_OF || TERMAL Thanks. -- Dmitry ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] Input: sun4i-ts: add thermal driver dependency 2015-01-29 18:51 ` Dmitry Torokhov @ 2015-02-11 18:24 ` Dmitry Torokhov 2015-02-12 7:01 ` Hans de Goede 2015-02-12 7:42 ` Chen-Yu Tsai 1 sibling, 1 reply; 7+ messages in thread From: Dmitry Torokhov @ 2015-02-11 18:24 UTC (permalink / raw) To: Hans de Goede Cc: Arnd Bergmann, linux-input, linux-kernel, linux-arm-kernel, Chen-Yu Tsai On Thu, Jan 29, 2015 at 10:51:51AM -0800, Dmitry Torokhov wrote: > On Thu, Jan 29, 2015 at 08:50:18AM +0100, Hans de Goede wrote: > > Hi, > > > > On 28-01-15 16:17, Arnd Bergmann wrote: > > >The sun4i-ts driver has had a dependency on the thermal code > > >since it was first merged, > > > > The "since it was first merged bit" is not true, this is caused > > by recent changes by ChenYu. > > > > Other then that no objections from me against the proposed fix. > > > > Regards, > > > > Hans > > > > > > but this is not currently enforced > > >in Kconfig, so in some randconfig builds we get > > > > > >drivers/built-in.o: In function `sun4i_ts_remove': > > >:(.text+0x2376f4): undefined reference to `thermal_zone_of_sensor_unregister' > > >drivers/built-in.o: In function `sun4i_ts_probe': > > >:(.text+0x237a94): undefined reference to `thermal_zone_of_sensor_register' > > >:(.text+0x237c00): undefined reference to `thermal_zone_of_sensor_unregister' > > > > > >We need the dependency on THERMAL in order to ensure that this > > >driver becomes a loadable module if the thermal support itself > > >is modular, while the dependency on THERMAL_OF is a runtime dependency > > >and the driver will still build but not work if it is missing. > > > > > >Signed-off-by: Arnd Bergmann <arnd@arndb.de> > > >Fixes: 6decea7c5438e2 ("Input: add driver for Allwinner sunxi SoC's rtp controller") > > > > > >diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig > > >index 58917525126e..e2447f0063b7 100644 > > >--- a/drivers/input/touchscreen/Kconfig > > >+++ b/drivers/input/touchscreen/Kconfig > > >@@ -943,6 +943,8 @@ config TOUCHSCREEN_SUN4I > > > tristate "Allwinner sun4i resistive touchscreen controller support" > > > depends on ARCH_SUNXI || COMPILE_TEST > > > depends on HWMON > > >+ depends on THERMAL > > >+ depends on THERMAL_OF || COMPILE_TEST > > THERMAL_OF does have proper stubs and I do not see why we need to force > having TERMAL even if we don't do compile test. Should the dependency be: > > depends on !THERMAL_OF || TERMAL *ping* Thanks. -- Dmitry ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] Input: sun4i-ts: add thermal driver dependency 2015-02-11 18:24 ` Dmitry Torokhov @ 2015-02-12 7:01 ` Hans de Goede 2015-02-12 7:38 ` Chen-Yu Tsai 0 siblings, 1 reply; 7+ messages in thread From: Hans de Goede @ 2015-02-12 7:01 UTC (permalink / raw) To: Dmitry Torokhov, Chen-Yu Tsai Cc: Arnd Bergmann, linux-input, linux-kernel, linux-arm-kernel Hi, On 11-02-15 19:24, Dmitry Torokhov wrote: > On Thu, Jan 29, 2015 at 10:51:51AM -0800, Dmitry Torokhov wrote: >> On Thu, Jan 29, 2015 at 08:50:18AM +0100, Hans de Goede wrote: >>> Hi, >>> >>> On 28-01-15 16:17, Arnd Bergmann wrote: >>>> The sun4i-ts driver has had a dependency on the thermal code >>>> since it was first merged, >>> >>> The "since it was first merged bit" is not true, this is caused >>> by recent changes by ChenYu. >>> >>> Other then that no objections from me against the proposed fix. >>> >>> Regards, >>> >>> Hans >>> >>> >>> but this is not currently enforced >>>> in Kconfig, so in some randconfig builds we get >>>> >>>> drivers/built-in.o: In function `sun4i_ts_remove': >>>> :(.text+0x2376f4): undefined reference to `thermal_zone_of_sensor_unregister' >>>> drivers/built-in.o: In function `sun4i_ts_probe': >>>> :(.text+0x237a94): undefined reference to `thermal_zone_of_sensor_register' >>>> :(.text+0x237c00): undefined reference to `thermal_zone_of_sensor_unregister' >>>> >>>> We need the dependency on THERMAL in order to ensure that this >>>> driver becomes a loadable module if the thermal support itself >>>> is modular, while the dependency on THERMAL_OF is a runtime dependency >>>> and the driver will still build but not work if it is missing. >>>> >>>> Signed-off-by: Arnd Bergmann <arnd@arndb.de> >>>> Fixes: 6decea7c5438e2 ("Input: add driver for Allwinner sunxi SoC's rtp controller") >>>> >>>> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig >>>> index 58917525126e..e2447f0063b7 100644 >>>> --- a/drivers/input/touchscreen/Kconfig >>>> +++ b/drivers/input/touchscreen/Kconfig >>>> @@ -943,6 +943,8 @@ config TOUCHSCREEN_SUN4I >>>> tristate "Allwinner sun4i resistive touchscreen controller support" >>>> depends on ARCH_SUNXI || COMPILE_TEST >>>> depends on HWMON >>>> + depends on THERMAL >>>> + depends on THERMAL_OF || COMPILE_TEST >> >> THERMAL_OF does have proper stubs and I do not see why we need to force >> having TERMAL even if we don't do compile test. Should the dependency be: >> >> depends on !THERMAL_OF || TERMAL > > *ping* ChenYu, since your patch causes this problem I'm assuming that you will come up with a fix, is that correct ? Regards, Hans ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] Input: sun4i-ts: add thermal driver dependency 2015-02-12 7:01 ` Hans de Goede @ 2015-02-12 7:38 ` Chen-Yu Tsai 0 siblings, 0 replies; 7+ messages in thread From: Chen-Yu Tsai @ 2015-02-12 7:38 UTC (permalink / raw) To: Hans de Goede Cc: Dmitry Torokhov, Arnd Bergmann, linux-input, linux-kernel, linux-arm-kernel Hi, On Thu, Feb 12, 2015 at 3:01 PM, Hans de Goede <hdegoede@redhat.com> wrote: > Hi, > > > On 11-02-15 19:24, Dmitry Torokhov wrote: >> >> On Thu, Jan 29, 2015 at 10:51:51AM -0800, Dmitry Torokhov wrote: >>> >>> On Thu, Jan 29, 2015 at 08:50:18AM +0100, Hans de Goede wrote: >>>> >>>> Hi, >>>> >>>> On 28-01-15 16:17, Arnd Bergmann wrote: >>>>> >>>>> The sun4i-ts driver has had a dependency on the thermal code >>>>> since it was first merged, >>>> >>>> >>>> The "since it was first merged bit" is not true, this is caused >>>> by recent changes by ChenYu. >>>> >>>> Other then that no objections from me against the proposed fix. >>>> >>>> Regards, >>>> >>>> Hans >>>> >>>> >>>> but this is not currently enforced >>>>> >>>>> in Kconfig, so in some randconfig builds we get >>>>> >>>>> drivers/built-in.o: In function `sun4i_ts_remove': >>>>> :(.text+0x2376f4): undefined reference to >>>>> `thermal_zone_of_sensor_unregister' >>>>> drivers/built-in.o: In function `sun4i_ts_probe': >>>>> :(.text+0x237a94): undefined reference to >>>>> `thermal_zone_of_sensor_register' >>>>> :(.text+0x237c00): undefined reference to >>>>> `thermal_zone_of_sensor_unregister' >>>>> >>>>> We need the dependency on THERMAL in order to ensure that this >>>>> driver becomes a loadable module if the thermal support itself >>>>> is modular, while the dependency on THERMAL_OF is a runtime dependency >>>>> and the driver will still build but not work if it is missing. >>>>> >>>>> Signed-off-by: Arnd Bergmann <arnd@arndb.de> >>>>> Fixes: 6decea7c5438e2 ("Input: add driver for Allwinner sunxi SoC's rtp >>>>> controller") >>>>> >>>>> diff --git a/drivers/input/touchscreen/Kconfig >>>>> b/drivers/input/touchscreen/Kconfig >>>>> index 58917525126e..e2447f0063b7 100644 >>>>> --- a/drivers/input/touchscreen/Kconfig >>>>> +++ b/drivers/input/touchscreen/Kconfig >>>>> @@ -943,6 +943,8 @@ config TOUCHSCREEN_SUN4I >>>>> tristate "Allwinner sun4i resistive touchscreen controller >>>>> support" >>>>> depends on ARCH_SUNXI || COMPILE_TEST >>>>> depends on HWMON >>>>> + depends on THERMAL >>>>> + depends on THERMAL_OF || COMPILE_TEST >>> >>> >>> THERMAL_OF does have proper stubs and I do not see why we need to force >>> having TERMAL even if we don't do compile test. Should the dependency be: >>> >>> depends on !THERMAL_OF || TERMAL >> >> >> *ping* > > > ChenYu, since your patch causes this problem I'm assuming that you will come > up with a fix, is that correct ? Wasn't aware everyone was waiting on me. Patch coming right up. ChenYu ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] Input: sun4i-ts: add thermal driver dependency 2015-01-29 18:51 ` Dmitry Torokhov 2015-02-11 18:24 ` Dmitry Torokhov @ 2015-02-12 7:42 ` Chen-Yu Tsai 1 sibling, 0 replies; 7+ messages in thread From: Chen-Yu Tsai @ 2015-02-12 7:42 UTC (permalink / raw) To: Dmitry Torokhov Cc: Hans de Goede, Arnd Bergmann, linux-input, linux-kernel, linux-arm-kernel On Fri, Jan 30, 2015 at 2:51 AM, Dmitry Torokhov <dmitry.torokhov@gmail.com> wrote: > On Thu, Jan 29, 2015 at 08:50:18AM +0100, Hans de Goede wrote: >> Hi, >> >> On 28-01-15 16:17, Arnd Bergmann wrote: >> >The sun4i-ts driver has had a dependency on the thermal code >> >since it was first merged, >> >> The "since it was first merged bit" is not true, this is caused >> by recent changes by ChenYu. >> >> Other then that no objections from me against the proposed fix. >> >> Regards, >> >> Hans >> >> >> but this is not currently enforced >> >in Kconfig, so in some randconfig builds we get >> > >> >drivers/built-in.o: In function `sun4i_ts_remove': >> >:(.text+0x2376f4): undefined reference to `thermal_zone_of_sensor_unregister' >> >drivers/built-in.o: In function `sun4i_ts_probe': >> >:(.text+0x237a94): undefined reference to `thermal_zone_of_sensor_register' >> >:(.text+0x237c00): undefined reference to `thermal_zone_of_sensor_unregister' >> > >> >We need the dependency on THERMAL in order to ensure that this >> >driver becomes a loadable module if the thermal support itself >> >is modular, while the dependency on THERMAL_OF is a runtime dependency >> >and the driver will still build but not work if it is missing. >> > >> >Signed-off-by: Arnd Bergmann <arnd@arndb.de> >> >Fixes: 6decea7c5438e2 ("Input: add driver for Allwinner sunxi SoC's rtp controller") >> > >> >diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig >> >index 58917525126e..e2447f0063b7 100644 >> >--- a/drivers/input/touchscreen/Kconfig >> >+++ b/drivers/input/touchscreen/Kconfig >> >@@ -943,6 +943,8 @@ config TOUCHSCREEN_SUN4I >> > tristate "Allwinner sun4i resistive touchscreen controller support" >> > depends on ARCH_SUNXI || COMPILE_TEST >> > depends on HWMON >> >+ depends on THERMAL >> >+ depends on THERMAL_OF || COMPILE_TEST > > THERMAL_OF does have proper stubs and I do not see why we need to force > having TERMAL even if we don't do compile test. Should the dependency be: > > depends on !THERMAL_OF || TERMAL ^^^ typo Yes this solves the problem. ChenYu ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2015-02-12 7:42 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2015-01-28 15:17 [PATCH] Input: sun4i-ts: add thermal driver dependency Arnd Bergmann 2015-01-29 7:50 ` Hans de Goede 2015-01-29 18:51 ` Dmitry Torokhov 2015-02-11 18:24 ` Dmitry Torokhov 2015-02-12 7:01 ` Hans de Goede 2015-02-12 7:38 ` Chen-Yu Tsai 2015-02-12 7:42 ` Chen-Yu Tsai
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).