From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
To: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: tpmdd-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org,
"Martin Wilck" <Martin.Wilck@ts.fujitsu.com>,
"Peter Huewe" <peterhuewe@gmx.de>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Subject: Re: [PATCH v3 1/7] tpm_crb: Use the common ACPI definition of struct acpi_tpm2
Date: Sun, 3 Jan 2016 19:09:06 +0200 [thread overview]
Message-ID: <20160103170906.GA4155@intel.com> (raw)
In-Reply-To: <1450376600-6970-2-git-send-email-jgunthorpe@obsidianresearch.com>
On Thu, Dec 17, 2015 at 11:23:14AM -0700, Jason Gunthorpe wrote:
> include/acpi/actbl2.h is the proper place for these definitions
> and the needed TPM2 ones have been there since
> commit 413d4a6defe0 ("ACPICA: Update TPM2 ACPI table")
>
> This also drops a couple of le32_to_cpu's for members of this table,
> the existing swapping was not done consistently, and the definitions
> in actbl2.h do not have endianness annotations, declaring that no swap
> is required. Note that the TPM ACPI spec defines all of these
> values to be little endian, both in crb2 and ppi.
I think this patch mixes two separate changes to the driver: removing
l32_to_cpu's and moving to common headers and that is not right.
Even if they should be removed I think what you say about actbl2.h is
wrong. Annotations are probably missing because it is imported code (I'm
happy to be corrected if this is not the case).
/Jarkko
> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
> Tested-by: Wilck, Martin <martin.wilck@ts.fujitsu.com>
> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
> ---
> drivers/char/tpm/tpm.h | 7 -------
> drivers/char/tpm/tpm_crb.c | 31 +++++++++----------------------
> drivers/char/tpm/tpm_tis.c | 2 +-
> 3 files changed, 10 insertions(+), 30 deletions(-)
>
> diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
> index 542a80cbfd9c..28b477e8da6a 100644
> --- a/drivers/char/tpm/tpm.h
> +++ b/drivers/char/tpm/tpm.h
> @@ -128,13 +128,6 @@ enum tpm2_startup_types {
> TPM2_SU_STATE = 0x0001,
> };
>
> -enum tpm2_start_method {
> - TPM2_START_ACPI = 2,
> - TPM2_START_FIFO = 6,
> - TPM2_START_CRB = 7,
> - TPM2_START_CRB_WITH_ACPI = 8,
> -};
> -
> struct tpm_chip;
>
> struct tpm_vendor_specific {
> diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
> index 8342cf51ffdc..8dd70696ebe8 100644
> --- a/drivers/char/tpm/tpm_crb.c
> +++ b/drivers/char/tpm/tpm_crb.c
> @@ -34,14 +34,6 @@ enum crb_defaults {
> CRB_ACPI_START_INDEX = 1,
> };
>
> -struct acpi_tpm2 {
> - struct acpi_table_header hdr;
> - u16 platform_class;
> - u16 reserved;
> - u64 control_area_pa;
> - u32 start_method;
> -} __packed;
> -
> enum crb_ca_request {
> CRB_CA_REQ_GO_IDLE = BIT(0),
> CRB_CA_REQ_CMD_READY = BIT(1),
> @@ -207,7 +199,7 @@ static const struct tpm_class_ops tpm_crb = {
> static int crb_acpi_add(struct acpi_device *device)
> {
> struct tpm_chip *chip;
> - struct acpi_tpm2 *buf;
> + struct acpi_table_tpm2 *buf;
> struct crb_priv *priv;
> struct device *dev = &device->dev;
> acpi_status status;
> @@ -217,13 +209,14 @@ static int crb_acpi_add(struct acpi_device *device)
>
> status = acpi_get_table(ACPI_SIG_TPM2, 1,
> (struct acpi_table_header **) &buf);
> - if (ACPI_FAILURE(status)) {
> - dev_err(dev, "failed to get TPM2 ACPI table\n");
> + if (ACPI_FAILURE(status) || buf->header.length < sizeof(*buf)) {
> + dev_err(dev, FW_BUG "failed to get TPM2 ACPI table\n");
> return -ENODEV;
> }
>
> /* Should the FIFO driver handle this? */
> - if (buf->start_method == TPM2_START_FIFO)
> + sm = buf->start_method;
> + if (sm == ACPI_TPM2_MEMORY_MAPPED)
> return -ENODEV;
>
> chip = tpmm_chip_alloc(dev, &tpm_crb);
> @@ -232,11 +225,6 @@ static int crb_acpi_add(struct acpi_device *device)
>
> chip->flags = TPM_CHIP_FLAG_TPM2;
>
> - if (buf->hdr.length < sizeof(struct acpi_tpm2)) {
> - dev_err(dev, "TPM2 ACPI table has wrong size");
> - return -EINVAL;
> - }
> -
> priv = (struct crb_priv *) devm_kzalloc(dev, sizeof(struct crb_priv),
> GFP_KERNEL);
> if (!priv) {
> @@ -244,21 +232,20 @@ static int crb_acpi_add(struct acpi_device *device)
> return -ENOMEM;
> }
>
> - sm = le32_to_cpu(buf->start_method);
> -
> /* The reason for the extra quirk is that the PTT in 4th Gen Core CPUs
> * report only ACPI start but in practice seems to require both
> * ACPI start and CRB start.
> */
> - if (sm == TPM2_START_CRB || sm == TPM2_START_FIFO ||
> + if (sm == ACPI_TPM2_COMMAND_BUFFER || sm == ACPI_TPM2_MEMORY_MAPPED ||
> !strcmp(acpi_device_hid(device), "MSFT0101"))
> priv->flags |= CRB_FL_CRB_START;
>
> - if (sm == TPM2_START_ACPI || sm == TPM2_START_CRB_WITH_ACPI)
> + if (sm == ACPI_TPM2_START_METHOD ||
> + sm == ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD)
> priv->flags |= CRB_FL_ACPI_START;
>
> priv->cca = (struct crb_control_area __iomem *)
> - devm_ioremap_nocache(dev, buf->control_area_pa, 0x1000);
> + devm_ioremap_nocache(dev, buf->control_address, 0x1000);
> if (!priv->cca) {
> dev_err(dev, "ioremap of the control area failed\n");
> return -ENOMEM;
> diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
> index 8a3509cb10da..304323bdcaaa 100644
> --- a/drivers/char/tpm/tpm_tis.c
> +++ b/drivers/char/tpm/tpm_tis.c
> @@ -135,7 +135,7 @@ static inline int is_fifo(struct acpi_device *dev)
> return 0;
> }
>
> - if (le32_to_cpu(tbl->start_method) != TPM2_START_FIFO)
> + if (tbl->start_method != ACPI_TPM2_MEMORY_MAPPED)
> return 0;
>
> /* TPM 2.0 FIFO */
> --
> 2.1.4
>
next prev parent reply other threads:[~2016-01-03 17:09 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-17 18:23 [PATCH v3 0/7] tpm_tis: Clean up force module parameter Jason Gunthorpe
2015-12-17 18:23 ` [PATCH v3 1/7] tpm_crb: Use the common ACPI definition of struct acpi_tpm2 Jason Gunthorpe
2016-01-03 17:09 ` Jarkko Sakkinen [this message]
2016-01-04 18:23 ` Jason Gunthorpe
2016-01-04 18:49 ` Jarkko Sakkinen
2015-12-17 18:23 ` [PATCH v3 2/7] tpm_tis: Disable interrupt auto probing on a per-device basis Jason Gunthorpe
2016-01-03 17:20 ` Jarkko Sakkinen
2016-01-04 18:24 ` Jason Gunthorpe
2016-01-04 18:32 ` Jarkko Sakkinen
2015-12-17 18:23 ` [PATCH v3 3/7] tpm_tis: Do not fall back to a hardcoded address for TPM2 Jason Gunthorpe
2015-12-18 9:34 ` Jarkko Sakkinen
2015-12-18 16:51 ` Jason Gunthorpe
2015-12-20 12:34 ` Jarkko Sakkinen
2015-12-17 18:23 ` [PATCH v3 4/7] tpm_tis: Use devm_ioremap_resource Jason Gunthorpe
2016-01-03 17:23 ` Jarkko Sakkinen
2015-12-17 18:23 ` [PATCH v3 5/7] tpm_tis: Clean up the force=1 module parameter Jason Gunthorpe
2016-01-03 17:26 ` Jarkko Sakkinen
2016-01-04 18:27 ` Jason Gunthorpe
2015-12-17 18:23 ` [PATCH v3 6/7] tpm_crb: Drop le32_to_cpu(ioread32(..)) Jason Gunthorpe
2016-01-03 17:28 ` Jarkko Sakkinen
2015-12-17 18:23 ` [PATCH v3 7/7] tpm_crb: Use devm_ioremap_resource Jason Gunthorpe
2016-01-03 17:32 ` Jarkko Sakkinen
2016-01-04 18:30 ` Jason Gunthorpe
2016-01-04 19:43 ` Jarkko Sakkinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160103170906.GA4155@intel.com \
--to=jarkko.sakkinen@linux.intel.com \
--cc=Martin.Wilck@ts.fujitsu.com \
--cc=jgunthorpe@obsidianresearch.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peterhuewe@gmx.de \
--cc=tpmdd-devel@lists.sourceforge.net \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).