From: LABBE Corentin <clabbe.montjoie@gmail.com>
To: Rob Herring <robh@kernel.org>
Cc: mark.rutland@arm.com, maxime.ripard@free-electrons.com,
wens@csie.org, linux@armlinux.org.uk, davem@davemloft.net,
netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: Re: [PATCH v2 3/5] ARM: sun8i: dt: Add DT bindings documentation for Allwinner sun8i-emac
Date: Thu, 28 Jul 2016 15:21:51 +0200 [thread overview]
Message-ID: <20160728132151.GB7582@Red> (raw)
In-Reply-To: <20160720191533.GA12875@rob-hp-laptop>
On Wed, Jul 20, 2016 at 02:15:33PM -0500, Rob Herring wrote:
> On Wed, Jul 20, 2016 at 10:03:18AM +0200, LABBE Corentin wrote:
> > This patch adds documentation for Device-Tree bindings for the
> > Allwinner sun8i-emac driver.
> >
> > Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
> > ---
> > .../bindings/net/allwinner,sun8i-emac.txt | 65 ++++++++++++++++++++++
> > 1 file changed, 65 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/net/allwinner,sun8i-emac.txt
> >
> > diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-emac.txt b/Documentation/devicetree/bindings/net/allwinner,sun8i-emac.txt
> > new file mode 100644
> > index 0000000..4bf4e53
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-emac.txt
> > @@ -0,0 +1,65 @@
> > +* Allwinner sun8i EMAC ethernet controller
> > +
> > +Required properties:
> > +- compatible: "allwinner,sun8i-a83t-emac", "allwinner,sun8i-h3-emac",
> > + or "allwinner,sun50i-a64-emac"
>
> List one per line.
>
ok
> > +- reg: address and length of the register sets for the device.
> > +- reg-names: should be "emac" and "syscon", matching the register sets
> > +- interrupts: interrupt for the device
> > +- clocks: A phandle to the reference clock for this device
> > +- clock-names: should be "ahb"
> > +- resets: A phandle to the reset control for this device
> > +- reset-names: should be "ahb"
> > +- phy-mode: See ethernet.txt
> > +- phy or phy-handle: See ethernet.txt
> > +- #address-cells: shall be 1
> > +- #size-cells: shall be 0
> > +
> > +"allwinner,sun8i-h3-emac" also requires:
> > +- clocks: an extra phandle to the reference clock for the EPHY
> > +- clock-names: an extra "ephy" entry matching the clocks property
> > +- resets: an extra phandle to the reset control for the EPHY
> > +- resets-names: an extra "ephy" entry matching the resets property
> > +
> > +See ethernet.txt in the same directory for generic bindings for ethernet
> > +controllers.
> > +
> > +The device node referenced by "phy" or "phy-handle" should be a child node
> > +of this node. See phy.txt for the generic PHY bindings.
> > +
> > +Optional properties:
> > +- phy-supply: phandle to a regulator if the PHY needs one
> > +- phy-io-supply: phandle to a regulator if the PHY needs a another one for I/O.
> > + This is sometimes found with RGMII PHYs, which use a second
> > + regulator for the lower I/O voltage.
>
> I previously said these should go in the phy node, and you said you
> would remove them.
>
> Rob
Sorry, I forgot to remove them.
I have removed them now.
Regards
Thanks
LABBE Corentin
next prev parent reply other threads:[~2016-07-28 13:22 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-20 8:03 [PATCH v2 0/5] net-next: ethernet: add sun8i-emac driver LABBE Corentin
2016-07-20 8:03 ` [PATCH v2 1/5] " LABBE Corentin
2016-07-20 9:56 ` Arnd Bergmann
2016-07-28 13:18 ` LABBE Corentin
2016-07-29 9:26 ` Arnd Bergmann
2016-07-25 19:54 ` Maxime Ripard
2016-07-28 14:57 ` LABBE Corentin
2016-07-29 17:25 ` Maxime Ripard
2016-07-30 1:30 ` Chen-Yu Tsai
2016-07-30 7:34 ` Maxime Ripard
2016-07-29 10:12 ` Andre Przywara
2016-08-24 12:02 ` LABBE Corentin
2016-08-26 20:49 ` Maxime Ripard
2016-07-20 8:03 ` [PATCH v2 2/5] MAINTAINERS: Add myself as maintainers of sun8i-emac LABBE Corentin
2016-07-20 8:03 ` [PATCH v2 3/5] ARM: sun8i: dt: Add DT bindings documentation for Allwinner sun8i-emac LABBE Corentin
2016-07-20 19:15 ` Rob Herring
2016-07-28 13:21 ` LABBE Corentin [this message]
2016-07-21 7:55 ` Maxime Ripard
2016-07-28 13:40 ` LABBE Corentin
2016-07-28 18:49 ` Maxime Ripard
2016-07-29 8:15 ` LABBE Corentin
2016-07-29 18:12 ` Maxime Ripard
2016-07-20 8:03 ` [PATCH v2 4/5] ARM: dts: sun8i-h3: add sun8i-emac ethernet driver LABBE Corentin
2016-07-20 8:03 ` [PATCH v2 5/5] ARM: dts: sun8i: Enable sun8i-emac on the Orange PI PC LABBE Corentin
2016-07-25 13:16 ` [PATCH v2 0/5] net-next: ethernet: add sun8i-emac driver paulo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160728132151.GB7582@Red \
--to=clabbe.montjoie@gmail.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=netdev@vger.kernel.org \
--cc=robh@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).