From: Andi Shyti <andi.shyti@samsung.com>
To: Mauro Carvalho Chehab <mchehab@osg.samsung.com>,
Sean Young <sean@mess.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Richard Purdie <rpurdie@rpsys.net>,
Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-leds@vger.kernel.org, linux-kernel@vger.kernel.org,
Andi Shyti <andi.shyti@samsung.com>,
Andi Shyti <andi@etezian.org>
Subject: [PATCH v3 3/6] [media] rc-core: add support for IR raw transmitters
Date: Wed, 02 Nov 2016 19:40:07 +0900 [thread overview]
Message-ID: <20161102104010.26959-4-andi.shyti@samsung.com> (raw)
In-Reply-To: <20161102104010.26959-1-andi.shyti@samsung.com>
IR raw transmitter driver type is specified in the enum
rc_driver_type as RC_DRIVER_IR_RAW_TX which includes all those
devices that transmit raw stream of bit to a receiver.
The data are provided by userspace applications, therefore they
don't need any input device allocation, but still they need to be
registered as raw devices.
Suggested-by: Sean Young <sean@mess.org>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
---
drivers/media/rc/rc-main.c | 42 +++++++++++++++++++++++++-----------------
include/media/rc-core.h | 9 ++++++---
2 files changed, 31 insertions(+), 20 deletions(-)
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index 7ab1b32..0d2f440 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -1363,20 +1363,24 @@ struct rc_dev *rc_allocate_device(enum rc_driver_type type)
if (!dev)
return NULL;
- dev->input_dev = input_allocate_device();
- if (!dev->input_dev) {
- kfree(dev);
- return NULL;
- }
+ if (type != RC_DRIVER_IR_RAW_TX) {
+ dev->input_dev = input_allocate_device();
+ if (!dev->input_dev) {
+ kfree(dev);
+ return NULL;
+ }
+
+ dev->input_dev->getkeycode = ir_getkeycode;
+ dev->input_dev->setkeycode = ir_setkeycode;
+ input_set_drvdata(dev->input_dev, dev);
- dev->input_dev->getkeycode = ir_getkeycode;
- dev->input_dev->setkeycode = ir_setkeycode;
- input_set_drvdata(dev->input_dev, dev);
+ setup_timer(&dev->timer_keyup, ir_timer_keyup,
+ (unsigned long)dev);
- spin_lock_init(&dev->rc_map.lock);
- spin_lock_init(&dev->keylock);
+ spin_lock_init(&dev->rc_map.lock);
+ spin_lock_init(&dev->keylock);
+ }
mutex_init(&dev->lock);
- setup_timer(&dev->timer_keyup, ir_timer_keyup, (unsigned long)dev);
dev->dev.type = &rc_dev_type;
dev->dev.class = &rc_class;
@@ -1476,7 +1480,7 @@ static int rc_setup_rx_device(struct rc_dev *dev)
static void rc_free_rx_device(struct rc_dev *dev)
{
- if (!dev)
+ if (!dev || dev->driver_type == RC_DRIVER_IR_RAW_TX)
return;
ir_free_table(&dev->rc_map);
@@ -1506,7 +1510,8 @@ int rc_register_device(struct rc_dev *dev)
atomic_set(&dev->initialized, 0);
dev->dev.groups = dev->sysfs_groups;
- dev->sysfs_groups[attr++] = &rc_dev_protocol_attr_grp;
+ if (dev->driver_type != RC_DRIVER_IR_RAW_TX)
+ dev->sysfs_groups[attr++] = &rc_dev_protocol_attr_grp;
if (dev->s_filter)
dev->sysfs_groups[attr++] = &rc_dev_filter_attr_grp;
if (dev->s_wakeup_filter)
@@ -1524,11 +1529,14 @@ int rc_register_device(struct rc_dev *dev)
dev->input_name ?: "Unspecified device", path ?: "N/A");
kfree(path);
- rc = rc_setup_rx_device(dev);
- if (rc)
- goto out_dev;
+ if (dev->driver_type != RC_DRIVER_IR_RAW_TX) {
+ rc = rc_setup_rx_device(dev);
+ if (rc)
+ goto out_dev;
+ }
- if (dev->driver_type == RC_DRIVER_IR_RAW) {
+ if (dev->driver_type == RC_DRIVER_IR_RAW ||
+ dev->driver_type == RC_DRIVER_IR_RAW_TX) {
if (!raw_init) {
request_module_nowait("ir-lirc-codec");
raw_init = true;
diff --git a/include/media/rc-core.h b/include/media/rc-core.h
index f8ca557..b6f7419 100644
--- a/include/media/rc-core.h
+++ b/include/media/rc-core.h
@@ -32,13 +32,16 @@ do { \
/**
* enum rc_driver_type - type of the RC output
*
- * @RC_DRIVER_SCANCODE: Driver or hardware generates a scancode
- * @RC_DRIVER_IR_RAW: Driver or hardware generates pulse/space sequences.
- * It needs a Infra-Red pulse/space decoder
+ * @RC_DRIVER_SCANCODE: Driver or hardware generates a scancode
+ * @RC_DRIVER_IR_RAW: Driver or hardware generates pulse/space sequences.
+ * It needs a Infra-Red pulse/space decoder
+ * @RC_DRIVER_IR_RAW_TX: Device transmitter only,
+ driver requires pulse/space data sequence.
*/
enum rc_driver_type {
RC_DRIVER_SCANCODE = 0,
RC_DRIVER_IR_RAW,
+ RC_DRIVER_IR_RAW_TX,
};
/**
--
2.10.1
next prev parent reply other threads:[~2016-11-02 10:40 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-02 10:40 [PATCH v3 0/6] Add support for IR transmitters Andi Shyti
2016-11-02 10:40 ` [PATCH v3 1/6] [media] rc-main: assign driver type during allocation Andi Shyti
2016-11-02 10:40 ` [PATCH v3 2/6] [media] rc-main: split setup and unregister functions Andi Shyti
2016-11-02 10:40 ` Andi Shyti [this message]
2016-11-02 12:34 ` [PATCH v3 3/6] [media] rc-core: add support for IR raw transmitters kbuild test robot
2016-11-02 10:40 ` [PATCH v3 4/6] [media] rc-ir-raw: do not generate any receiving thread for " Andi Shyti
2016-11-02 10:40 ` [PATCH v3 5/6] Documentation: bindings: add documentation for ir-spi device driver Andi Shyti
2016-11-03 8:32 ` Jacek Anaszewski
2016-11-03 10:10 ` Andi Shyti
2016-11-03 10:39 ` Jacek Anaszewski
2016-11-04 4:28 ` Andi Shyti
2016-11-09 18:26 ` Rob Herring
2016-11-10 7:46 ` Jacek Anaszewski
2016-11-10 10:02 ` Andi Shyti
2016-11-14 16:10 ` Rob Herring
2016-11-02 10:40 ` [PATCH v3 6/6] [media] rc: add support for IR LEDs driven through SPI Andi Shyti
2016-11-02 17:29 ` [PATCH v3 0/6] Add support for IR transmitters Sean Young
2016-11-02 19:57 ` Heiner Kallweit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161102104010.26959-4-andi.shyti@samsung.com \
--to=andi.shyti@samsung.com \
--cc=andi@etezian.org \
--cc=devicetree@vger.kernel.org \
--cc=j.anaszewski@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mchehab@osg.samsung.com \
--cc=robh+dt@kernel.org \
--cc=rpurdie@rpsys.net \
--cc=sean@mess.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).