* Re: [PATCH v3 1/6] dt-bindings: add device tree binding for Allwinner V3s pinctrl [not found] <20170119175448.11445-1-icenowy@aosc.xyz> @ 2017-01-20 20:24 ` Maxime Ripard [not found] ` <20170119175448.11445-4-icenowy@aosc.xyz> ` (3 subsequent siblings) 4 siblings, 0 replies; 5+ messages in thread From: Maxime Ripard @ 2017-01-20 20:24 UTC (permalink / raw) To: Icenowy Zheng Cc: Chen-Yu Tsai, Rob Herring, linux-doc, linux-arm-kernel, linux-kernel, linux-clk, devicetree, linux-gpio [-- Attachment #1: Type: text/plain, Size: 467 bytes --] On Fri, Jan 20, 2017 at 01:54:43AM +0800, Icenowy Zheng wrote: > Allwinner V3s SoC has a pin controller like other Allwinner SoCs and got > supported by the sunxi-pinctrl driver now. > > Add a device tree binding for it. > > Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Thanks, Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 801 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <20170119175448.11445-4-icenowy@aosc.xyz>]
* Re: [PATCH v3 4/6] dt-bindings: add device binding for the CCU of Allwinner V3s [not found] ` <20170119175448.11445-4-icenowy@aosc.xyz> @ 2017-01-20 20:32 ` Maxime Ripard 0 siblings, 0 replies; 5+ messages in thread From: Maxime Ripard @ 2017-01-20 20:32 UTC (permalink / raw) To: Icenowy Zheng Cc: Chen-Yu Tsai, Rob Herring, linux-doc, linux-arm-kernel, linux-kernel, linux-clk, devicetree, linux-gpio [-- Attachment #1: Type: text/plain, Size: 344 bytes --] On Fri, Jan 20, 2017 at 01:54:46AM +0800, Icenowy Zheng wrote: > Allwinner V3s is now driven by sunxi-ng CCU driver. > > Add devicetree binding for it. > > Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Applied. Thanks, Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 801 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <20170119175448.11445-3-icenowy@aosc.xyz>]
* Re: [PATCH v3 3/6] clk: sunxi-ng: add support for V3s CCU [not found] ` <20170119175448.11445-3-icenowy@aosc.xyz> @ 2017-01-20 20:38 ` Maxime Ripard 0 siblings, 0 replies; 5+ messages in thread From: Maxime Ripard @ 2017-01-20 20:38 UTC (permalink / raw) To: Icenowy Zheng Cc: Chen-Yu Tsai, Rob Herring, linux-doc, linux-arm-kernel, linux-kernel, linux-clk, devicetree, linux-gpio [-- Attachment #1: Type: text/plain, Size: 699 bytes --] On Fri, Jan 20, 2017 at 01:54:45AM +0800, Icenowy Zheng wrote: > V3s has a similar but cut-down CCU to H3. Some muxes, especially clocks > about CSI, are different, which makes it to need a new CCU driver. > > Add such a new driver for it. > > Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> > --- Having a changelog somewhere would help. Why did you drop your cover letter? > +static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x", "pll-ddr" }; This is more that 80 characters and triggers a warning in checkpatch... Anyway, fixed and applied. Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 801 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <20170119175448.11445-5-icenowy@aosc.xyz>]
* Re: [PATCH v3 5/6] ARM: dts: sunxi: add dtsi file for V3s SoC [not found] ` <20170119175448.11445-5-icenowy@aosc.xyz> @ 2017-01-20 20:48 ` Maxime Ripard 0 siblings, 0 replies; 5+ messages in thread From: Maxime Ripard @ 2017-01-20 20:48 UTC (permalink / raw) To: Icenowy Zheng Cc: Chen-Yu Tsai, Rob Herring, linux-doc, linux-arm-kernel, linux-kernel, linux-clk, devicetree, linux-gpio [-- Attachment #1: Type: text/plain, Size: 849 bytes --] On Fri, Jan 20, 2017 at 01:54:47AM +0800, Icenowy Zheng wrote: > As we have the pinctrl and clock support for the V3s SoC, it's now to > run a mainline Linux on it. > > So add a .dtsi file for it. > > Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Next time, please provide a description of what that SoC in your commit log. > + rtc: rtc@01c20400 { > + compatible = "allwinner,sun6i-a31-rtc"; > + reg = <0x01c20400 0x54>; > + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; > + }; Did you have the chance to actually test how the RTC was behaving? Other RTC have been pretty bad at keeping time, this is probably something you want to check. Applied, Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 801 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <20170119175448.11445-6-icenowy@aosc.xyz>]
* Re: [PATCH v3 6/6] ARM: dts: sunxi: add support for Lichee Pi Zero board [not found] ` <20170119175448.11445-6-icenowy@aosc.xyz> @ 2017-01-20 20:48 ` Maxime Ripard 0 siblings, 0 replies; 5+ messages in thread From: Maxime Ripard @ 2017-01-20 20:48 UTC (permalink / raw) To: Icenowy Zheng Cc: Chen-Yu Tsai, Rob Herring, linux-doc, linux-arm-kernel, linux-kernel, linux-clk, devicetree, linux-gpio [-- Attachment #1: Type: text/plain, Size: 402 bytes --] On Fri, Jan 20, 2017 at 01:54:48AM +0800, Icenowy Zheng wrote: > Lichee Pi Zero is a small-sized V3s board, which is > breadboard-compatible, and with a MicroUSB port with both OTG function > and power function. > > Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Applied, thanks Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 801 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-01-20 20:49 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <20170119175448.11445-1-icenowy@aosc.xyz> 2017-01-20 20:24 ` [PATCH v3 1/6] dt-bindings: add device tree binding for Allwinner V3s pinctrl Maxime Ripard [not found] ` <20170119175448.11445-4-icenowy@aosc.xyz> 2017-01-20 20:32 ` [PATCH v3 4/6] dt-bindings: add device binding for the CCU of Allwinner V3s Maxime Ripard [not found] ` <20170119175448.11445-3-icenowy@aosc.xyz> 2017-01-20 20:38 ` [PATCH v3 3/6] clk: sunxi-ng: add support for V3s CCU Maxime Ripard [not found] ` <20170119175448.11445-5-icenowy@aosc.xyz> 2017-01-20 20:48 ` [PATCH v3 5/6] ARM: dts: sunxi: add dtsi file for V3s SoC Maxime Ripard [not found] ` <20170119175448.11445-6-icenowy@aosc.xyz> 2017-01-20 20:48 ` [PATCH v3 6/6] ARM: dts: sunxi: add support for Lichee Pi Zero board Maxime Ripard
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).