* [PATCH v2 05/10] clk: sunxi-ng: Add A80 CCU
2017-01-28 12:22 [PATCH v2 00/10] clk: sunxi-ng: Add support for A80 CCUs Chen-Yu Tsai
` (3 preceding siblings ...)
2017-01-28 12:22 ` [PATCH v2 04/10] clk: sunxi-ng: Support separately grouped PLL lock status register Chen-Yu Tsai
@ 2017-01-28 12:22 ` Chen-Yu Tsai
2017-01-28 12:22 ` [PATCH v2 06/10] clk: sunxi-ng: Add A80 USB CCU Chen-Yu Tsai
` (5 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Chen-Yu Tsai @ 2017-01-28 12:22 UTC (permalink / raw)
To: Maxime Ripard, Rob Herring, Mark Rutland, Michael Turquette,
Stephen Boyd
Cc: Chen-Yu Tsai, linux-clk, linux-arm-kernel, devicetree,
linux-kernel, linux-sunxi
Add support for the main clock unit found in the A80. Some clocks were
not documented in the released user manual, but were found in the
official kernel from Allwinner. These include controls for the I2S,
SPDIF, SATA, and eDP blocks.
Note that on the A80, some subsystems have separate clock controllers
downstream of the main clock unit. These include the MMC, USB, and
display engine subsystems.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/clock/sunxi-ccu.txt | 1 +
drivers/clk/sunxi-ng/Kconfig | 10 +
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun9i-a80.c | 1223 ++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun9i-a80.h | 57 +
include/dt-bindings/clock/sun9i-a80-ccu.h | 162 +++
include/dt-bindings/reset/sun9i-a80-ccu.h | 102 ++
7 files changed, 1556 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun9i-a80.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun9i-a80.h
create mode 100644 include/dt-bindings/clock/sun9i-a80-ccu.h
create mode 100644 include/dt-bindings/reset/sun9i-a80-ccu.h
diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index f6032cf63f12..bae5668cf427 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -8,6 +8,7 @@ Required properties :
- "allwinner,sun8i-a33-ccu"
- "allwinner,sun8i-h3-ccu"
- "allwinner,sun8i-v3s-ccu"
+ - "allwinner,sun9i-a80-ccu"
- "allwinner,sun50i-a64-ccu"
- reg: Must contain the registers base address and length
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 71f11cd1647b..67659091860d 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -130,4 +130,14 @@ config SUN8I_V3S_CCU
select SUNXI_CCU_PHASE
default MACH_SUN8I
+config SUN9I_A80_CCU
+ bool "Support for the Allwinner A80 CCU"
+ select SUNXI_CCU_DIV
+ select SUNXI_CCU_GATE
+ select SUNXI_CCU_NKMP
+ select SUNXI_CCU_NM
+ select SUNXI_CCU_MP
+ select SUNXI_CCU_PHASE
+ default MACH_SUN9I
+
endif
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index a8afdf9c7668..126bb7c1c3f7 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -25,3 +25,4 @@ obj-$(CONFIG_SUN8I_A23_CCU) += ccu-sun8i-a23.o
obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
obj-$(CONFIG_SUN8I_H3_CCU) += ccu-sun8i-h3.o
obj-$(CONFIG_SUN8I_V3S_CCU) += ccu-sun8i-v3s.o
+obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun9i-a80.c b/drivers/clk/sunxi-ng/ccu-sun9i-a80.c
new file mode 100644
index 000000000000..e13e313ce4f5
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun9i-a80.c
@@ -0,0 +1,1223 @@
+/*
+ * Copyright (c) 2016 Chen-Yu Tsai. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun9i-a80.h"
+
+#define CCU_SUN9I_LOCK_REG 0x09c
+
+static struct clk_div_table pll_cpux_p_div_table[] = {
+ { .val = 0, .div = 1 },
+ { .val = 1, .div = 4 },
+ { /* Sentinel */ },
+};
+
+/*
+ * The CPU PLLs are actually NP clocks, but P is /1 or /4, so here we
+ * use the NM clocks with a divider table for M.
+ */
+static struct ccu_nm pll_c0cpux_clk = {
+ .enable = BIT(31),
+ .lock = BIT(0),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
+ .m = _SUNXI_CCU_DIV_TABLE(16, 1, pll_cpux_p_div_table),
+ .common = {
+ .reg = 0x000,
+ .lock_reg = CCU_SUN9I_LOCK_REG,
+ .features = CCU_FEATURE_LOCK_REG,
+ .hw.init = CLK_HW_INIT("pll-c0cpux", "osc24M",
+ &ccu_nm_ops, CLK_SET_RATE_UNGATE),
+ },
+};
+
+static struct ccu_nm pll_c1cpux_clk = {
+ .enable = BIT(31),
+ .lock = BIT(1),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
+ .m = _SUNXI_CCU_DIV_TABLE(16, 1, pll_cpux_p_div_table),
+ .common = {
+ .reg = 0x004,
+ .lock_reg = CCU_SUN9I_LOCK_REG,
+ .features = CCU_FEATURE_LOCK_REG,
+ .hw.init = CLK_HW_INIT("pll-c1cpux", "osc24M",
+ &ccu_nm_ops, CLK_SET_RATE_UNGATE),
+ },
+};
+
+/*
+ * The Audio PLL has d1, d2 dividers in addition to the usual N, M
+ * factors. Since we only need 2 frequencies from this PLL: 22.5792 MHz
+ * and 24.576 MHz, ignore them for now. Enforce the default for them,
+ * which is d1 = 0, d2 = 1.
+ */
+#define SUN9I_A80_PLL_AUDIO_REG 0x008
+
+static struct ccu_nm pll_audio_clk = {
+ .enable = BIT(31),
+ .lock = BIT(2),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
+ .m = _SUNXI_CCU_DIV_OFFSET(0, 6, 0),
+ .common = {
+ .reg = 0x008,
+ .lock_reg = CCU_SUN9I_LOCK_REG,
+ .features = CCU_FEATURE_LOCK_REG,
+ .hw.init = CLK_HW_INIT("pll-audio", "osc24M",
+ &ccu_nm_ops, CLK_SET_RATE_UNGATE),
+ },
+};
+
+/* Some PLLs are input * N / div1 / div2. Model them as NKMP with no K */
+static struct ccu_nkmp pll_periph0_clk = {
+ .enable = BIT(31),
+ .lock = BIT(3),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
+ .m = _SUNXI_CCU_DIV(16, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(18, 1), /* output divider */
+ .common = {
+ .reg = 0x00c,
+ .lock_reg = CCU_SUN9I_LOCK_REG,
+ .features = CCU_FEATURE_LOCK_REG,
+ .hw.init = CLK_HW_INIT("pll-periph0", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+static struct ccu_nkmp pll_ve_clk = {
+ .enable = BIT(31),
+ .lock = BIT(4),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
+ .m = _SUNXI_CCU_DIV(16, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(18, 1), /* output divider */
+ .common = {
+ .reg = 0x010,
+ .lock_reg = CCU_SUN9I_LOCK_REG,
+ .features = CCU_FEATURE_LOCK_REG,
+ .hw.init = CLK_HW_INIT("pll-ve", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+static struct ccu_nkmp pll_ddr_clk = {
+ .enable = BIT(31),
+ .lock = BIT(5),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
+ .m = _SUNXI_CCU_DIV(16, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(18, 1), /* output divider */
+ .common = {
+ .reg = 0x014,
+ .lock_reg = CCU_SUN9I_LOCK_REG,
+ .features = CCU_FEATURE_LOCK_REG,
+ .hw.init = CLK_HW_INIT("pll-ddr", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+static struct ccu_nm pll_video0_clk = {
+ .enable = BIT(31),
+ .lock = BIT(6),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
+ .m = _SUNXI_CCU_DIV(16, 1), /* input divider */
+ .common = {
+ .reg = 0x018,
+ .lock_reg = CCU_SUN9I_LOCK_REG,
+ .features = CCU_FEATURE_LOCK_REG,
+ .hw.init = CLK_HW_INIT("pll-video0", "osc24M",
+ &ccu_nm_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+static struct ccu_nkmp pll_video1_clk = {
+ .enable = BIT(31),
+ .lock = BIT(7),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
+ .m = _SUNXI_CCU_DIV(16, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(0, 2), /* external divider p */
+ .common = {
+ .reg = 0x01c,
+ .lock_reg = CCU_SUN9I_LOCK_REG,
+ .features = CCU_FEATURE_LOCK_REG,
+ .hw.init = CLK_HW_INIT("pll-video1", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+static struct ccu_nkmp pll_gpu_clk = {
+ .enable = BIT(31),
+ .lock = BIT(8),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
+ .m = _SUNXI_CCU_DIV(16, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(18, 1), /* output divider */
+ .common = {
+ .reg = 0x020,
+ .lock_reg = CCU_SUN9I_LOCK_REG,
+ .features = CCU_FEATURE_LOCK_REG,
+ .hw.init = CLK_HW_INIT("pll-gpu", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+static struct ccu_nkmp pll_de_clk = {
+ .enable = BIT(31),
+ .lock = BIT(9),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
+ .m = _SUNXI_CCU_DIV(16, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(18, 1), /* output divider */
+ .common = {
+ .reg = 0x024,
+ .lock_reg = CCU_SUN9I_LOCK_REG,
+ .features = CCU_FEATURE_LOCK_REG,
+ .hw.init = CLK_HW_INIT("pll-de", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+static struct ccu_nkmp pll_isp_clk = {
+ .enable = BIT(31),
+ .lock = BIT(10),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
+ .m = _SUNXI_CCU_DIV(16, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(18, 1), /* output divider */
+ .common = {
+ .reg = 0x028,
+ .lock_reg = CCU_SUN9I_LOCK_REG,
+ .features = CCU_FEATURE_LOCK_REG,
+ .hw.init = CLK_HW_INIT("pll-isp", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+static struct ccu_nkmp pll_periph1_clk = {
+ .enable = BIT(31),
+ .lock = BIT(11),
+ .n = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
+ .m = _SUNXI_CCU_DIV(16, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(18, 1), /* output divider */
+ .common = {
+ .reg = 0x028,
+ .lock_reg = CCU_SUN9I_LOCK_REG,
+ .features = CCU_FEATURE_LOCK_REG,
+ .hw.init = CLK_HW_INIT("pll-periph1", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+static const char * const c0cpux_parents[] = { "osc24M", "pll-c0cpux" };
+static SUNXI_CCU_MUX(c0cpux_clk, "c0cpux", c0cpux_parents,
+ 0x50, 0, 1, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+
+static const char * const c1cpux_parents[] = { "osc24M", "pll-c1cpux" };
+static SUNXI_CCU_MUX(c1cpux_clk, "c1cpux", c1cpux_parents,
+ 0x50, 8, 1, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+
+static struct clk_div_table axi_div_table[] = {
+ { .val = 0, .div = 1 },
+ { .val = 1, .div = 2 },
+ { .val = 2, .div = 3 },
+ { .val = 3, .div = 4 },
+ { .val = 4, .div = 4 },
+ { .val = 5, .div = 4 },
+ { .val = 6, .div = 4 },
+ { .val = 7, .div = 4 },
+ { /* Sentinel */ },
+};
+
+static SUNXI_CCU_M(atb0_clk, "atb0", "c0cpux", 0x054, 8, 2, 0);
+
+static SUNXI_CCU_DIV_TABLE(axi0_clk, "axi0", "c0cpux",
+ 0x054, 0, 3, axi_div_table, 0);
+
+static SUNXI_CCU_M(atb1_clk, "atb1", "c1cpux", 0x058, 8, 2, 0);
+
+static SUNXI_CCU_DIV_TABLE(axi1_clk, "axi1", "c1cpux",
+ 0x058, 0, 3, axi_div_table, 0);
+
+static const char * const gtbus_parents[] = { "osc24M", "pll-periph0",
+ "pll-periph1", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX(gtbus_clk, "gtbus", gtbus_parents,
+ 0x05c, 0, 2, 24, 2, CLK_IS_CRITICAL);
+
+static const char * const ahb_parents[] = { "gtbus", "pll-periph0",
+ "pll-periph1", "pll-periph1" };
+static struct ccu_div ahb0_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(0, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = _SUNXI_CCU_MUX(24, 2),
+ .common = {
+ .reg = 0x060,
+ .hw.init = CLK_HW_INIT_PARENTS("ahb0",
+ ahb_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct ccu_div ahb1_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(0, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = _SUNXI_CCU_MUX(24, 2),
+ .common = {
+ .reg = 0x064,
+ .hw.init = CLK_HW_INIT_PARENTS("ahb1",
+ ahb_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct ccu_div ahb2_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(0, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = _SUNXI_CCU_MUX(24, 2),
+ .common = {
+ .reg = 0x068,
+ .hw.init = CLK_HW_INIT_PARENTS("ahb2",
+ ahb_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static const char * const apb_parents[] = { "osc24M", "pll-periph0" };
+
+static struct ccu_div apb0_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(0, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = _SUNXI_CCU_MUX(24, 1),
+ .common = {
+ .reg = 0x070,
+ .hw.init = CLK_HW_INIT_PARENTS("apb0",
+ apb_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct ccu_div apb1_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(0, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = _SUNXI_CCU_MUX(24, 1),
+ .common = {
+ .reg = 0x074,
+ .hw.init = CLK_HW_INIT_PARENTS("apb1",
+ apb_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static struct ccu_div cci400_clk = {
+ .div = _SUNXI_CCU_DIV_FLAGS(0, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = _SUNXI_CCU_MUX(24, 2),
+ .common = {
+ .reg = 0x078,
+ .hw.init = CLK_HW_INIT_PARENTS("cci400",
+ ahb_parents,
+ &ccu_div_ops,
+ CLK_IS_CRITICAL),
+ },
+};
+
+static SUNXI_CCU_M_WITH_MUX_GATE(ats_clk, "ats", apb_parents,
+ 0x080, 0, 3, 24, 2, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(trace_clk, "trace", apb_parents,
+ 0x084, 0, 3, 24, 2, BIT(31), 0);
+
+static const char * const out_parents[] = { "osc24M", "osc32k", "osc24M" };
+static const struct ccu_mux_fixed_prediv out_prediv = {
+ .index = 0, .div = 750
+};
+
+static struct ccu_mp out_a_clk = {
+ .enable = BIT(31),
+ .m = _SUNXI_CCU_DIV(8, 5),
+ .p = _SUNXI_CCU_DIV(20, 2),
+ .mux = {
+ .shift = 24,
+ .width = 4,
+ .fixed_predivs = &out_prediv,
+ .n_predivs = 1,
+ },
+ .common = {
+ .reg = 0x180,
+ .features = CCU_FEATURE_FIXED_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("out-a",
+ out_parents,
+ &ccu_mp_ops,
+ 0),
+ },
+};
+
+static struct ccu_mp out_b_clk = {
+ .enable = BIT(31),
+ .m = _SUNXI_CCU_DIV(8, 5),
+ .p = _SUNXI_CCU_DIV(20, 2),
+ .mux = {
+ .shift = 24,
+ .width = 4,
+ .fixed_predivs = &out_prediv,
+ .n_predivs = 1,
+ },
+ .common = {
+ .reg = 0x184,
+ .features = CCU_FEATURE_FIXED_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("out-b",
+ out_parents,
+ &ccu_mp_ops,
+ 0),
+ },
+};
+
+static const char * const mod0_default_parents[] = { "osc24M", "pll-periph0" };
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_0_clk, "nand0-0", mod0_default_parents,
+ 0x400,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_1_clk, "nand0-1", mod0_default_parents,
+ 0x404,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_0_clk, "nand1-0", mod0_default_parents,
+ 0x408,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_1_clk, "nand1-1", mod0_default_parents,
+ 0x40c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents,
+ 0x410,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0-sample", "mmc0",
+ 0x410, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0-output", "mmc0",
+ 0x410, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents,
+ 0x414,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1-sample", "mmc1",
+ 0x414, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1-output", "mmc1",
+ 0x414, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc2_clk, "mmc2", mod0_default_parents,
+ 0x418,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_PHASE(mmc2_sample_clk, "mmc2-sample", "mmc2",
+ 0x418, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc2_output_clk, "mmc2-output", "mmc2",
+ 0x418, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc3_clk, "mmc3", mod0_default_parents,
+ 0x41c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_PHASE(mmc3_sample_clk, "mmc3-sample", "mmc3",
+ 0x41c, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc3_output_clk, "mmc3-output", "mmc3",
+ 0x41c, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", mod0_default_parents,
+ 0x428,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const ss_parents[] = { "osc24M", "pll-periph",
+ "pll-periph1" };
+static const u8 ss_table[] = { 0, 1, 13 };
+static struct ccu_mp ss_clk = {
+ .enable = BIT(31),
+ .m = _SUNXI_CCU_DIV(0, 4),
+ .p = _SUNXI_CCU_DIV(16, 2),
+ .mux = _SUNXI_CCU_MUX_TABLE(24, 4, ss_table),
+ .common = {
+ .reg = 0x42c,
+ .hw.init = CLK_HW_INIT_PARENTS("ss",
+ ss_parents,
+ &ccu_mp_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents,
+ 0x430,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents,
+ 0x434,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi2_clk, "spi2", mod0_default_parents,
+ 0x438,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi3_clk, "spi3", mod0_default_parents,
+ 0x43c,
+ 0, 4, /* M */
+ 16, 2, /* P */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_M_WITH_GATE(i2s0_clk, "i2s0", "pll-audio",
+ 0x440, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M_WITH_GATE(i2s1_clk, "i2s1", "pll-audio",
+ 0x444, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M_WITH_GATE(spdif_clk, "spdif", "pll-audio",
+ 0x44c, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char * const sdram_parents[] = { "pll-periph0", "pll-ddr" };
+static const u8 sdram_table[] = { 0, 3 };
+
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(sdram_clk, "sdram",
+ sdram_parents, sdram_table,
+ 0x484,
+ 8, 4, /* M */
+ 12, 4, /* mux */
+ 0, /* no gate */
+ CLK_IS_CRITICAL);
+
+static SUNXI_CCU_M_WITH_GATE(de_clk, "de", "pll-de", 0x490,
+ 0, 4, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(edp_clk, "edp", "osc24M", 0x494, BIT(31), 0);
+
+static const char * const mp_parents[] = { "pll-video1", "pll-gpu", "pll-de" };
+static const u8 mp_table[] = { 9, 10, 11 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(mp_clk, "mp", mp_parents, mp_table,
+ 0x498,
+ 0, 4, /* M */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const display_parents[] = { "pll-video0", "pll-video1" };
+static const u8 display_table[] = { 8, 9 };
+
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(lcd0_clk, "lcd0",
+ display_parents, display_table,
+ 0x49c,
+ 0, 4, /* M */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ CLK_SET_RATE_NO_REPARENT |
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(lcd1_clk, "lcd1",
+ display_parents, display_table,
+ 0x4a0,
+ 0, 4, /* M */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ CLK_SET_RATE_NO_REPARENT |
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(mipi_dsi0_clk, "mipi-dsi0",
+ display_parents, display_table,
+ 0x4a8,
+ 0, 4, /* M */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ CLK_SET_RATE_PARENT);
+
+static const char * const mipi_dsi1_parents[] = { "osc24M", "pll-video1" };
+static const u8 mipi_dsi1_table[] = { 0, 9 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(mipi_dsi1_clk, "mipi-dsi1",
+ mipi_dsi1_parents, mipi_dsi1_table,
+ 0x4ac,
+ 0, 4, /* M */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(hdmi_clk, "hdmi",
+ display_parents, display_table,
+ 0x4b0,
+ 0, 4, /* M */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ CLK_SET_RATE_NO_REPARENT |
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(hdmi_slow_clk, "hdmi-slow", "osc24M", 0x4b4, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_GATE(mipi_csi_clk, "mipi-csi", "osc24M", 0x4bc,
+ 0, 4, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_GATE(csi_isp_clk, "csi-isp", "pll-isp", 0x4c0,
+ 0, 4, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(csi_misc_clk, "csi-misc", "osc24M", 0x4c0, BIT(16), 0);
+
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi0_mclk_clk, "csi0-mclk",
+ mipi_dsi1_parents, mipi_dsi1_table,
+ 0x4c4,
+ 0, 4, /* M */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi1_mclk_clk, "csi1-mclk",
+ mipi_dsi1_parents, mipi_dsi1_table,
+ 0x4c8,
+ 0, 4, /* M */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ CLK_SET_RATE_PARENT);
+
+static const char * const fd_parents[] = { "pll-periph0", "pll-isp" };
+static const u8 fd_table[] = { 1, 12 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(fd_clk, "fd", fd_parents, fd_table,
+ 0x4cc,
+ 0, 4, /* M */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ 0);
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve", 0x4d0,
+ 16, 3, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M", 0x4d4, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_GATE(gpu_core_clk, "gpu-core", "pll-gpu", 0x4f0,
+ 0, 3, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M_WITH_GATE(gpu_memory_clk, "gpu-memory", "pll-gpu", 0x4f4,
+ 0, 3, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char * const gpu_axi_parents[] = { "pll-periph0", "pll-gpu" };
+static const u8 gpu_axi_table[] = { 1, 10 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(gpu_axi_clk, "gpu-axi",
+ gpu_axi_parents, gpu_axi_table,
+ 0x4f8,
+ 0, 4, /* M */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_GATE(sata_clk, "sata", "pll-periph0", 0x500,
+ 0, 4, BIT(31), 0);
+
+static SUNXI_CCU_M_WITH_GATE(ac97_clk, "ac97", "pll-audio",
+ 0x504, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(mipi_hsi_clk, "mipi-hsi",
+ mod0_default_parents, 0x508,
+ 0, 4, /* M */
+ 24, 4, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static const char * const gpadc_parents[] = { "osc24M", "pll-audio", "osc32k" };
+static const u8 gpadc_table[] = { 0, 4, 7 };
+static struct ccu_mp gpadc_clk = {
+ .enable = BIT(31),
+ .m = _SUNXI_CCU_DIV(0, 4),
+ .p = _SUNXI_CCU_DIV(16, 2),
+ .mux = _SUNXI_CCU_MUX_TABLE(24, 4, gpadc_table),
+ .common = {
+ .reg = 0x50c,
+ .hw.init = CLK_HW_INIT_PARENTS("gpadc",
+ gpadc_parents,
+ &ccu_mp_ops,
+ 0),
+ },
+};
+
+static const char * const cir_tx_parents[] = { "osc24M", "osc32k" };
+static const u8 cir_tx_table[] = { 0, 7 };
+static struct ccu_mp cir_tx_clk = {
+ .enable = BIT(31),
+ .m = _SUNXI_CCU_DIV(0, 4),
+ .p = _SUNXI_CCU_DIV(16, 2),
+ .mux = _SUNXI_CCU_MUX_TABLE(24, 4, cir_tx_table),
+ .common = {
+ .reg = 0x510,
+ .hw.init = CLK_HW_INIT_PARENTS("cir-tx",
+ cir_tx_parents,
+ &ccu_mp_ops,
+ 0),
+ },
+};
+
+/* AHB0 bus gates */
+static SUNXI_CCU_GATE(bus_fd_clk, "bus-fd", "ahb0",
+ 0x580, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "ahb0",
+ 0x580, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_gpu_ctrl_clk, "bus-gpu-ctrl", "ahb0",
+ 0x580, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_ss_clk, "bus-ss", "ahb0",
+ 0x580, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_mmc_clk, "bus-mmc", "ahb0",
+ 0x580, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_nand0_clk, "bus-nand0", "ahb0",
+ 0x580, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_nand1_clk, "bus-nand1", "ahb0",
+ 0x580, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_sdram_clk, "bus-sdram", "ahb0",
+ 0x580, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_mipi_hsi_clk, "bus-mipi-hsi", "ahb0",
+ 0x580, BIT(15), 0);
+static SUNXI_CCU_GATE(bus_sata_clk, "bus-sata", "ahb0",
+ 0x580, BIT(16), 0);
+static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb0",
+ 0x580, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb0",
+ 0x580, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb0",
+ 0x580, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_spi2_clk, "bus-spi2", "ahb0",
+ 0x580, BIT(22), 0);
+static SUNXI_CCU_GATE(bus_spi3_clk, "bus-spi3", "ahb0",
+ 0x580, BIT(23), 0);
+
+/* AHB1 bus gates */
+static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb1",
+ 0x584, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_usb_clk, "bus-usb", "ahb1",
+ 0x584, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_gmac_clk, "bus-gmac", "ahb1",
+ 0x584, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_msgbox_clk, "bus-msgbox", "ahb1",
+ 0x584, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_spinlock_clk, "bus-spinlock", "ahb1",
+ 0x584, BIT(22), 0);
+static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "ahb1",
+ 0x584, BIT(23), 0);
+static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "ahb1",
+ 0x584, BIT(24), 0);
+
+/* AHB2 bus gates */
+static SUNXI_CCU_GATE(bus_lcd0_clk, "bus-lcd0", "ahb2",
+ 0x588, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_lcd1_clk, "bus-lcd1", "ahb2",
+ 0x588, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_edp_clk, "bus-edp", "ahb2",
+ 0x588, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_csi_clk, "bus-csi", "ahb2",
+ 0x588, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb2",
+ 0x588, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "ahb2",
+ 0x588, BIT(7), 0);
+static SUNXI_CCU_GATE(bus_mp_clk, "bus-mp", "ahb2",
+ 0x588, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_mipi_dsi_clk, "bus-mipi-dsi", "ahb2",
+ 0x588, BIT(11), 0);
+
+/* APB0 bus gates */
+static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb0",
+ 0x590, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_pio_clk, "bus-pio", "apb0",
+ 0x590, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_ac97_clk, "bus-ac97", "apb0",
+ 0x590, BIT(11), 0);
+static SUNXI_CCU_GATE(bus_i2s0_clk, "bus-i2s0", "apb0",
+ 0x590, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_i2s1_clk, "bus-i2s1", "apb0",
+ 0x590, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_lradc_clk, "bus-lradc", "apb0",
+ 0x590, BIT(15), 0);
+static SUNXI_CCU_GATE(bus_gpadc_clk, "bus-gpadc", "apb0",
+ 0x590, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_twd_clk, "bus-twd", "apb0",
+ 0x590, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_cir_tx_clk, "bus-cir-tx", "apb0",
+ 0x590, BIT(19), 0);
+
+/* APB1 bus gates */
+static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb1",
+ 0x594, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb1",
+ 0x594, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb1",
+ 0x594, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb1",
+ 0x594, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_i2c4_clk, "bus-i2c4", "apb1",
+ 0x594, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb1",
+ 0x594, BIT(16), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb1",
+ 0x594, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb1",
+ 0x594, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb1",
+ 0x594, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb1",
+ 0x594, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_uart5_clk, "bus-uart5", "apb1",
+ 0x594, BIT(21), 0);
+
+static struct ccu_common *sun9i_a80_ccu_clks[] = {
+ &pll_c0cpux_clk.common,
+ &pll_c1cpux_clk.common,
+ &pll_audio_clk.common,
+ &pll_periph0_clk.common,
+ &pll_ve_clk.common,
+ &pll_ddr_clk.common,
+ &pll_video0_clk.common,
+ &pll_video1_clk.common,
+ &pll_gpu_clk.common,
+ &pll_de_clk.common,
+ &pll_isp_clk.common,
+ &pll_periph1_clk.common,
+ &c0cpux_clk.common,
+ &c1cpux_clk.common,
+ &atb0_clk.common,
+ &axi0_clk.common,
+ &atb1_clk.common,
+ &axi1_clk.common,
+ >bus_clk.common,
+ &ahb0_clk.common,
+ &ahb1_clk.common,
+ &ahb2_clk.common,
+ &apb0_clk.common,
+ &apb1_clk.common,
+ &cci400_clk.common,
+ &ats_clk.common,
+ &trace_clk.common,
+
+ &out_a_clk.common,
+ &out_b_clk.common,
+
+ /* module clocks */
+ &nand0_0_clk.common,
+ &nand0_1_clk.common,
+ &nand1_0_clk.common,
+ &nand1_1_clk.common,
+ &mmc0_clk.common,
+ &mmc0_sample_clk.common,
+ &mmc0_output_clk.common,
+ &mmc1_clk.common,
+ &mmc1_sample_clk.common,
+ &mmc1_output_clk.common,
+ &mmc2_clk.common,
+ &mmc2_sample_clk.common,
+ &mmc2_output_clk.common,
+ &mmc3_clk.common,
+ &mmc3_sample_clk.common,
+ &mmc3_output_clk.common,
+ &ts_clk.common,
+ &ss_clk.common,
+ &spi0_clk.common,
+ &spi1_clk.common,
+ &spi2_clk.common,
+ &spi3_clk.common,
+ &i2s0_clk.common,
+ &i2s1_clk.common,
+ &spdif_clk.common,
+ &sdram_clk.common,
+ &de_clk.common,
+ &edp_clk.common,
+ &mp_clk.common,
+ &lcd0_clk.common,
+ &lcd1_clk.common,
+ &mipi_dsi0_clk.common,
+ &mipi_dsi1_clk.common,
+ &hdmi_clk.common,
+ &hdmi_slow_clk.common,
+ &mipi_csi_clk.common,
+ &csi_isp_clk.common,
+ &csi_misc_clk.common,
+ &csi0_mclk_clk.common,
+ &csi1_mclk_clk.common,
+ &fd_clk.common,
+ &ve_clk.common,
+ &avs_clk.common,
+ &gpu_core_clk.common,
+ &gpu_memory_clk.common,
+ &gpu_axi_clk.common,
+ &sata_clk.common,
+ &ac97_clk.common,
+ &mipi_hsi_clk.common,
+ &gpadc_clk.common,
+ &cir_tx_clk.common,
+
+ /* AHB0 bus gates */
+ &bus_fd_clk.common,
+ &bus_ve_clk.common,
+ &bus_gpu_ctrl_clk.common,
+ &bus_ss_clk.common,
+ &bus_mmc_clk.common,
+ &bus_nand0_clk.common,
+ &bus_nand1_clk.common,
+ &bus_sdram_clk.common,
+ &bus_mipi_hsi_clk.common,
+ &bus_sata_clk.common,
+ &bus_ts_clk.common,
+ &bus_spi0_clk.common,
+ &bus_spi1_clk.common,
+ &bus_spi2_clk.common,
+ &bus_spi3_clk.common,
+
+ /* AHB1 bus gates */
+ &bus_otg_clk.common,
+ &bus_usb_clk.common,
+ &bus_gmac_clk.common,
+ &bus_msgbox_clk.common,
+ &bus_spinlock_clk.common,
+ &bus_hstimer_clk.common,
+ &bus_dma_clk.common,
+
+ /* AHB2 bus gates */
+ &bus_lcd0_clk.common,
+ &bus_lcd1_clk.common,
+ &bus_edp_clk.common,
+ &bus_csi_clk.common,
+ &bus_hdmi_clk.common,
+ &bus_de_clk.common,
+ &bus_mp_clk.common,
+ &bus_mipi_dsi_clk.common,
+
+ /* APB0 bus gates */
+ &bus_spdif_clk.common,
+ &bus_pio_clk.common,
+ &bus_ac97_clk.common,
+ &bus_i2s0_clk.common,
+ &bus_i2s1_clk.common,
+ &bus_lradc_clk.common,
+ &bus_gpadc_clk.common,
+ &bus_twd_clk.common,
+ &bus_cir_tx_clk.common,
+
+ /* APB1 bus gates */
+ &bus_i2c0_clk.common,
+ &bus_i2c1_clk.common,
+ &bus_i2c2_clk.common,
+ &bus_i2c3_clk.common,
+ &bus_i2c4_clk.common,
+ &bus_uart0_clk.common,
+ &bus_uart1_clk.common,
+ &bus_uart2_clk.common,
+ &bus_uart3_clk.common,
+ &bus_uart4_clk.common,
+ &bus_uart5_clk.common,
+};
+
+static struct clk_hw_onecell_data sun9i_a80_hw_clks = {
+ .hws = {
+ [CLK_PLL_C0CPUX] = &pll_c0cpux_clk.common.hw,
+ [CLK_PLL_C1CPUX] = &pll_c1cpux_clk.common.hw,
+ [CLK_PLL_AUDIO] = &pll_audio_clk.common.hw,
+ [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
+ [CLK_PLL_VE] = &pll_ve_clk.common.hw,
+ [CLK_PLL_DDR] = &pll_ddr_clk.common.hw,
+ [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
+ [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
+ [CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
+ [CLK_PLL_DE] = &pll_de_clk.common.hw,
+ [CLK_PLL_ISP] = &pll_isp_clk.common.hw,
+ [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
+ [CLK_C0CPUX] = &c0cpux_clk.common.hw,
+ [CLK_C1CPUX] = &c1cpux_clk.common.hw,
+ [CLK_ATB0] = &atb0_clk.common.hw,
+ [CLK_AXI0] = &axi0_clk.common.hw,
+ [CLK_ATB1] = &atb1_clk.common.hw,
+ [CLK_AXI1] = &axi1_clk.common.hw,
+ [CLK_GTBUS] = >bus_clk.common.hw,
+ [CLK_AHB0] = &ahb0_clk.common.hw,
+ [CLK_AHB1] = &ahb1_clk.common.hw,
+ [CLK_AHB2] = &ahb2_clk.common.hw,
+ [CLK_APB0] = &apb0_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_CCI400] = &cci400_clk.common.hw,
+ [CLK_ATS] = &ats_clk.common.hw,
+ [CLK_TRACE] = &trace_clk.common.hw,
+
+ [CLK_OUT_A] = &out_a_clk.common.hw,
+ [CLK_OUT_B] = &out_b_clk.common.hw,
+
+ [CLK_NAND0_0] = &nand0_0_clk.common.hw,
+ [CLK_NAND0_1] = &nand0_1_clk.common.hw,
+ [CLK_NAND1_0] = &nand1_0_clk.common.hw,
+ [CLK_NAND1_1] = &nand1_1_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC0_SAMPLE] = &mmc0_sample_clk.common.hw,
+ [CLK_MMC0_OUTPUT] = &mmc0_output_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC1_SAMPLE] = &mmc1_sample_clk.common.hw,
+ [CLK_MMC1_OUTPUT] = &mmc1_output_clk.common.hw,
+ [CLK_MMC2] = &mmc2_clk.common.hw,
+ [CLK_MMC2_SAMPLE] = &mmc2_sample_clk.common.hw,
+ [CLK_MMC2_OUTPUT] = &mmc2_output_clk.common.hw,
+ [CLK_MMC3] = &mmc3_clk.common.hw,
+ [CLK_MMC3_SAMPLE] = &mmc3_sample_clk.common.hw,
+ [CLK_MMC3_OUTPUT] = &mmc3_output_clk.common.hw,
+ [CLK_TS] = &ts_clk.common.hw,
+ [CLK_SS] = &ss_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_SPI1] = &spi1_clk.common.hw,
+ [CLK_SPI2] = &spi2_clk.common.hw,
+ [CLK_SPI3] = &spi3_clk.common.hw,
+ [CLK_I2S0] = &i2s0_clk.common.hw,
+ [CLK_I2S1] = &i2s1_clk.common.hw,
+ [CLK_SPDIF] = &spdif_clk.common.hw,
+ [CLK_SDRAM] = &sdram_clk.common.hw,
+ [CLK_DE] = &de_clk.common.hw,
+ [CLK_EDP] = &edp_clk.common.hw,
+ [CLK_MP] = &mp_clk.common.hw,
+ [CLK_LCD0] = &lcd0_clk.common.hw,
+ [CLK_LCD1] = &lcd1_clk.common.hw,
+ [CLK_MIPI_DSI0] = &mipi_dsi0_clk.common.hw,
+ [CLK_MIPI_DSI1] = &mipi_dsi1_clk.common.hw,
+ [CLK_HDMI] = &hdmi_clk.common.hw,
+ [CLK_HDMI_SLOW] = &hdmi_slow_clk.common.hw,
+ [CLK_MIPI_CSI] = &mipi_csi_clk.common.hw,
+ [CLK_CSI_ISP] = &csi_isp_clk.common.hw,
+ [CLK_CSI_MISC] = &csi_misc_clk.common.hw,
+ [CLK_CSI0_MCLK] = &csi0_mclk_clk.common.hw,
+ [CLK_CSI1_MCLK] = &csi1_mclk_clk.common.hw,
+ [CLK_FD] = &fd_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_GPU_CORE] = &gpu_core_clk.common.hw,
+ [CLK_GPU_MEMORY] = &gpu_memory_clk.common.hw,
+ [CLK_GPU_AXI] = &gpu_axi_clk.common.hw,
+ [CLK_SATA] = &sata_clk.common.hw,
+ [CLK_AC97] = &ac97_clk.common.hw,
+ [CLK_MIPI_HSI] = &mipi_hsi_clk.common.hw,
+ [CLK_GPADC] = &gpadc_clk.common.hw,
+ [CLK_CIR_TX] = &cir_tx_clk.common.hw,
+
+ [CLK_BUS_FD] = &bus_fd_clk.common.hw,
+ [CLK_BUS_VE] = &bus_ve_clk.common.hw,
+ [CLK_BUS_GPU_CTRL] = &bus_gpu_ctrl_clk.common.hw,
+ [CLK_BUS_SS] = &bus_ss_clk.common.hw,
+ [CLK_BUS_MMC] = &bus_mmc_clk.common.hw,
+ [CLK_BUS_NAND0] = &bus_nand0_clk.common.hw,
+ [CLK_BUS_NAND1] = &bus_nand1_clk.common.hw,
+ [CLK_BUS_SDRAM] = &bus_sdram_clk.common.hw,
+ [CLK_BUS_MIPI_HSI] = &bus_mipi_hsi_clk.common.hw,
+ [CLK_BUS_SATA] = &bus_sata_clk.common.hw,
+ [CLK_BUS_TS] = &bus_ts_clk.common.hw,
+ [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
+ [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
+ [CLK_BUS_SPI2] = &bus_spi2_clk.common.hw,
+ [CLK_BUS_SPI3] = &bus_spi3_clk.common.hw,
+
+ [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
+ [CLK_BUS_USB] = &bus_usb_clk.common.hw,
+ [CLK_BUS_GMAC] = &bus_gmac_clk.common.hw,
+ [CLK_BUS_MSGBOX] = &bus_msgbox_clk.common.hw,
+ [CLK_BUS_SPINLOCK] = &bus_spinlock_clk.common.hw,
+ [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
+ [CLK_BUS_DMA] = &bus_dma_clk.common.hw,
+
+ [CLK_BUS_LCD0] = &bus_lcd0_clk.common.hw,
+ [CLK_BUS_LCD1] = &bus_lcd1_clk.common.hw,
+ [CLK_BUS_EDP] = &bus_edp_clk.common.hw,
+ [CLK_BUS_CSI] = &bus_csi_clk.common.hw,
+ [CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
+ [CLK_BUS_DE] = &bus_de_clk.common.hw,
+ [CLK_BUS_MP] = &bus_mp_clk.common.hw,
+ [CLK_BUS_MIPI_DSI] = &bus_mipi_dsi_clk.common.hw,
+
+ [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
+ [CLK_BUS_PIO] = &bus_pio_clk.common.hw,
+ [CLK_BUS_AC97] = &bus_ac97_clk.common.hw,
+ [CLK_BUS_I2S0] = &bus_i2s0_clk.common.hw,
+ [CLK_BUS_I2S1] = &bus_i2s1_clk.common.hw,
+ [CLK_BUS_LRADC] = &bus_lradc_clk.common.hw,
+ [CLK_BUS_GPADC] = &bus_gpadc_clk.common.hw,
+ [CLK_BUS_TWD] = &bus_twd_clk.common.hw,
+ [CLK_BUS_CIR_TX] = &bus_cir_tx_clk.common.hw,
+
+ [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
+ [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
+ [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
+ [CLK_BUS_I2C3] = &bus_i2c3_clk.common.hw,
+ [CLK_BUS_I2C4] = &bus_i2c4_clk.common.hw,
+ [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
+ [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
+ [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
+ [CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
+ [CLK_BUS_UART4] = &bus_uart4_clk.common.hw,
+ [CLK_BUS_UART5] = &bus_uart5_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun9i_a80_ccu_resets[] = {
+ /* AHB0 reset controls */
+ [RST_BUS_FD] = { 0x5a0, BIT(0) },
+ [RST_BUS_VE] = { 0x5a0, BIT(1) },
+ [RST_BUS_GPU_CTRL] = { 0x5a0, BIT(3) },
+ [RST_BUS_SS] = { 0x5a0, BIT(5) },
+ [RST_BUS_MMC] = { 0x5a0, BIT(8) },
+ [RST_BUS_NAND0] = { 0x5a0, BIT(12) },
+ [RST_BUS_NAND1] = { 0x5a0, BIT(13) },
+ [RST_BUS_SDRAM] = { 0x5a0, BIT(14) },
+ [RST_BUS_SATA] = { 0x5a0, BIT(16) },
+ [RST_BUS_TS] = { 0x5a0, BIT(18) },
+ [RST_BUS_SPI0] = { 0x5a0, BIT(20) },
+ [RST_BUS_SPI1] = { 0x5a0, BIT(21) },
+ [RST_BUS_SPI2] = { 0x5a0, BIT(22) },
+ [RST_BUS_SPI3] = { 0x5a0, BIT(23) },
+
+ /* AHB1 reset controls */
+ [RST_BUS_OTG] = { 0x5a4, BIT(0) },
+ [RST_BUS_OTG_PHY] = { 0x5a4, BIT(1) },
+ [RST_BUS_MIPI_HSI] = { 0x5a4, BIT(9) },
+ [RST_BUS_GMAC] = { 0x5a4, BIT(17) },
+ [RST_BUS_MSGBOX] = { 0x5a4, BIT(21) },
+ [RST_BUS_SPINLOCK] = { 0x5a4, BIT(22) },
+ [RST_BUS_HSTIMER] = { 0x5a4, BIT(23) },
+ [RST_BUS_DMA] = { 0x5a4, BIT(24) },
+
+ /* AHB2 reset controls */
+ [RST_BUS_LCD0] = { 0x5a8, BIT(0) },
+ [RST_BUS_LCD1] = { 0x5a8, BIT(1) },
+ [RST_BUS_EDP] = { 0x5a8, BIT(2) },
+ [RST_BUS_LVDS] = { 0x5a8, BIT(3) },
+ [RST_BUS_CSI] = { 0x5a8, BIT(4) },
+ [RST_BUS_HDMI0] = { 0x5a8, BIT(5) },
+ [RST_BUS_HDMI1] = { 0x5a8, BIT(6) },
+ [RST_BUS_DE] = { 0x5a8, BIT(7) },
+ [RST_BUS_MP] = { 0x5a8, BIT(8) },
+ [RST_BUS_GPU] = { 0x5a8, BIT(9) },
+ [RST_BUS_MIPI_DSI] = { 0x5a8, BIT(11) },
+
+ /* APB0 reset controls */
+ [RST_BUS_SPDIF] = { 0x5b0, BIT(1) },
+ [RST_BUS_AC97] = { 0x5b0, BIT(11) },
+ [RST_BUS_I2S0] = { 0x5b0, BIT(12) },
+ [RST_BUS_I2S1] = { 0x5b0, BIT(13) },
+ [RST_BUS_LRADC] = { 0x5b0, BIT(15) },
+ [RST_BUS_GPADC] = { 0x5b0, BIT(17) },
+ [RST_BUS_CIR_TX] = { 0x5b0, BIT(19) },
+
+ /* APB1 reset controls */
+ [RST_BUS_I2C0] = { 0x5b4, BIT(0) },
+ [RST_BUS_I2C1] = { 0x5b4, BIT(1) },
+ [RST_BUS_I2C2] = { 0x5b4, BIT(2) },
+ [RST_BUS_I2C3] = { 0x5b4, BIT(3) },
+ [RST_BUS_I2C4] = { 0x5b4, BIT(4) },
+ [RST_BUS_UART0] = { 0x5b4, BIT(16) },
+ [RST_BUS_UART1] = { 0x5b4, BIT(17) },
+ [RST_BUS_UART2] = { 0x5b4, BIT(18) },
+ [RST_BUS_UART3] = { 0x5b4, BIT(19) },
+ [RST_BUS_UART4] = { 0x5b4, BIT(20) },
+ [RST_BUS_UART5] = { 0x5b4, BIT(21) },
+};
+
+static const struct sunxi_ccu_desc sun9i_a80_ccu_desc = {
+ .ccu_clks = sun9i_a80_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun9i_a80_ccu_clks),
+
+ .hw_clks = &sun9i_a80_hw_clks,
+
+ .resets = sun9i_a80_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun9i_a80_ccu_resets),
+};
+
+static int sun9i_a80_ccu_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ void __iomem *reg;
+ u32 val;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ reg = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(reg))
+ return PTR_ERR(reg);
+
+ /* Enforce d1 = 0, d2 = 0 for Audio PLL */
+ val = readl(reg + SUN9I_A80_PLL_AUDIO_REG);
+ val &= (BIT(16) & BIT(18));
+ writel(val, reg + SUN9I_A80_PLL_AUDIO_REG);
+
+ return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun9i_a80_ccu_desc);
+}
+
+static const struct of_device_id sun9i_a80_ccu_ids[] = {
+ { .compatible = "allwinner,sun9i-a80-ccu" },
+ { }
+};
+
+static struct platform_driver sun9i_a80_ccu_driver = {
+ .probe = sun9i_a80_ccu_probe,
+ .driver = {
+ .name = "sun9i-a80-ccu",
+ .of_match_table = sun9i_a80_ccu_ids,
+ },
+};
+builtin_platform_driver(sun9i_a80_ccu_driver);
diff --git a/drivers/clk/sunxi-ng/ccu-sun9i-a80.h b/drivers/clk/sunxi-ng/ccu-sun9i-a80.h
new file mode 100644
index 000000000000..315662341c70
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun9i-a80.h
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2016 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN9I_A80_H_
+#define _CCU_SUN9I_A80_H_
+
+#include <dt-bindings/clock/sun9i-a80-ccu.h>
+#include <dt-bindings/reset/sun9i-a80-ccu.h>
+
+#define CLK_PLL_C0CPUX 0
+#define CLK_PLL_C1CPUX 1
+
+/* pll-audio and pll-periph0 are exported to the PRCM block */
+
+#define CLK_PLL_VE 4
+#define CLK_PLL_DDR 5
+#define CLK_PLL_VIDEO0 6
+#define CLK_PLL_VIDEO1 7
+#define CLK_PLL_GPU 8
+#define CLK_PLL_DE 9
+#define CLK_PLL_ISP 10
+#define CLK_PLL_PERIPH1 11
+
+/* The CPUX clocks are exported */
+
+#define CLK_ATB0 14
+#define CLK_AXI0 15
+#define CLK_ATB1 16
+#define CLK_AXI1 17
+#define CLK_GTBUS 18
+#define CLK_AHB0 19
+#define CLK_AHB1 20
+#define CLK_AHB2 21
+#define CLK_APB0 22
+#define CLK_APB1 23
+#define CLK_CCI400 24
+#define CLK_ATS 25
+#define CLK_TRACE 26
+
+/* module clocks and bus gates exported */
+
+#define CLK_NUMBER (CLK_BUS_UART5 + 1)
+
+#endif /* _CCU_SUN9I_A80_H_ */
diff --git a/include/dt-bindings/clock/sun9i-a80-ccu.h b/include/dt-bindings/clock/sun9i-a80-ccu.h
new file mode 100644
index 000000000000..6ea1492a73a6
--- /dev/null
+++ b/include/dt-bindings/clock/sun9i-a80-ccu.h
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SUN9I_A80_CCU_H_
+#define _DT_BINDINGS_CLOCK_SUN9I_A80_CCU_H_
+
+#define CLK_PLL_AUDIO 2
+#define CLK_PLL_PERIPH0 3
+
+#define CLK_C0CPUX 12
+#define CLK_C1CPUX 13
+
+#define CLK_OUT_A 27
+#define CLK_OUT_B 28
+
+#define CLK_NAND0_0 29
+#define CLK_NAND0_1 30
+#define CLK_NAND1_0 31
+#define CLK_NAND1_1 32
+#define CLK_MMC0 33
+#define CLK_MMC0_SAMPLE 34
+#define CLK_MMC0_OUTPUT 35
+#define CLK_MMC1 36
+#define CLK_MMC1_SAMPLE 37
+#define CLK_MMC1_OUTPUT 38
+#define CLK_MMC2 39
+#define CLK_MMC2_SAMPLE 40
+#define CLK_MMC2_OUTPUT 41
+#define CLK_MMC3 42
+#define CLK_MMC3_SAMPLE 43
+#define CLK_MMC3_OUTPUT 44
+#define CLK_TS 45
+#define CLK_SS 46
+#define CLK_SPI0 47
+#define CLK_SPI1 48
+#define CLK_SPI2 49
+#define CLK_SPI3 50
+#define CLK_I2S0 51
+#define CLK_I2S1 52
+#define CLK_SPDIF 53
+#define CLK_SDRAM 54
+#define CLK_DE 55
+#define CLK_EDP 56
+#define CLK_MP 57
+#define CLK_LCD0 58
+#define CLK_LCD1 59
+#define CLK_MIPI_DSI0 60
+#define CLK_MIPI_DSI1 61
+#define CLK_HDMI 62
+#define CLK_HDMI_SLOW 63
+#define CLK_MIPI_CSI 64
+#define CLK_CSI_ISP 65
+#define CLK_CSI_MISC 66
+#define CLK_CSI0_MCLK 67
+#define CLK_CSI1_MCLK 68
+#define CLK_FD 69
+#define CLK_VE 70
+#define CLK_AVS 71
+#define CLK_GPU_CORE 72
+#define CLK_GPU_MEMORY 73
+#define CLK_GPU_AXI 74
+#define CLK_SATA 75
+#define CLK_AC97 76
+#define CLK_MIPI_HSI 77
+#define CLK_GPADC 78
+#define CLK_CIR_TX 79
+
+#define CLK_BUS_FD 80
+#define CLK_BUS_VE 81
+#define CLK_BUS_GPU_CTRL 82
+#define CLK_BUS_SS 83
+#define CLK_BUS_MMC 84
+#define CLK_BUS_NAND0 85
+#define CLK_BUS_NAND1 86
+#define CLK_BUS_SDRAM 87
+#define CLK_BUS_MIPI_HSI 88
+#define CLK_BUS_SATA 89
+#define CLK_BUS_TS 90
+#define CLK_BUS_SPI0 91
+#define CLK_BUS_SPI1 92
+#define CLK_BUS_SPI2 93
+#define CLK_BUS_SPI3 94
+
+#define CLK_BUS_OTG 95
+#define CLK_BUS_USB 96
+#define CLK_BUS_GMAC 97
+#define CLK_BUS_MSGBOX 98
+#define CLK_BUS_SPINLOCK 99
+#define CLK_BUS_HSTIMER 100
+#define CLK_BUS_DMA 101
+
+#define CLK_BUS_LCD0 102
+#define CLK_BUS_LCD1 103
+#define CLK_BUS_EDP 104
+#define CLK_BUS_CSI 105
+#define CLK_BUS_HDMI 106
+#define CLK_BUS_DE 107
+#define CLK_BUS_MP 108
+#define CLK_BUS_MIPI_DSI 109
+
+#define CLK_BUS_SPDIF 110
+#define CLK_BUS_PIO 111
+#define CLK_BUS_AC97 112
+#define CLK_BUS_I2S0 113
+#define CLK_BUS_I2S1 114
+#define CLK_BUS_LRADC 115
+#define CLK_BUS_GPADC 116
+#define CLK_BUS_TWD 117
+#define CLK_BUS_CIR_TX 118
+
+#define CLK_BUS_I2C0 119
+#define CLK_BUS_I2C1 120
+#define CLK_BUS_I2C2 121
+#define CLK_BUS_I2C3 122
+#define CLK_BUS_I2C4 123
+#define CLK_BUS_UART0 124
+#define CLK_BUS_UART1 125
+#define CLK_BUS_UART2 126
+#define CLK_BUS_UART3 127
+#define CLK_BUS_UART4 128
+#define CLK_BUS_UART5 129
+
+#endif /* _DT_BINDINGS_CLOCK_SUN9I_A80_CCU_H_ */
diff --git a/include/dt-bindings/reset/sun9i-a80-ccu.h b/include/dt-bindings/reset/sun9i-a80-ccu.h
new file mode 100644
index 000000000000..4b8df4b36788
--- /dev/null
+++ b/include/dt-bindings/reset/sun9i-a80-ccu.h
@@ -0,0 +1,102 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RESET_SUN9I_A80_CCU_H_
+#define _DT_BINDINGS_RESET_SUN9I_A80_CCU_H_
+
+#define RST_BUS_FD 0
+#define RST_BUS_VE 1
+#define RST_BUS_GPU_CTRL 2
+#define RST_BUS_SS 3
+#define RST_BUS_MMC 4
+#define RST_BUS_NAND0 5
+#define RST_BUS_NAND1 6
+#define RST_BUS_SDRAM 7
+#define RST_BUS_SATA 8
+#define RST_BUS_TS 9
+#define RST_BUS_SPI0 10
+#define RST_BUS_SPI1 11
+#define RST_BUS_SPI2 12
+#define RST_BUS_SPI3 13
+
+#define RST_BUS_OTG 14
+#define RST_BUS_OTG_PHY 15
+#define RST_BUS_MIPI_HSI 16
+#define RST_BUS_GMAC 17
+#define RST_BUS_MSGBOX 18
+#define RST_BUS_SPINLOCK 19
+#define RST_BUS_HSTIMER 20
+#define RST_BUS_DMA 21
+
+#define RST_BUS_LCD0 22
+#define RST_BUS_LCD1 23
+#define RST_BUS_EDP 24
+#define RST_BUS_LVDS 25
+#define RST_BUS_CSI 26
+#define RST_BUS_HDMI0 27
+#define RST_BUS_HDMI1 28
+#define RST_BUS_DE 29
+#define RST_BUS_MP 30
+#define RST_BUS_GPU 31
+#define RST_BUS_MIPI_DSI 32
+
+#define RST_BUS_SPDIF 33
+#define RST_BUS_AC97 34
+#define RST_BUS_I2S0 35
+#define RST_BUS_I2S1 36
+#define RST_BUS_LRADC 37
+#define RST_BUS_GPADC 38
+#define RST_BUS_CIR_TX 39
+
+#define RST_BUS_I2C0 40
+#define RST_BUS_I2C1 41
+#define RST_BUS_I2C2 42
+#define RST_BUS_I2C3 43
+#define RST_BUS_I2C4 44
+#define RST_BUS_UART0 45
+#define RST_BUS_UART1 46
+#define RST_BUS_UART2 47
+#define RST_BUS_UART3 48
+#define RST_BUS_UART4 49
+#define RST_BUS_UART5 50
+
+#endif /* _DT_BINDINGS_RESET_SUN9I_A80_CCU_H_ */
--
2.11.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v2 07/10] clk: sunxi-ng: Add A80 Display Engine CCU
2017-01-28 12:22 [PATCH v2 00/10] clk: sunxi-ng: Add support for A80 CCUs Chen-Yu Tsai
` (5 preceding siblings ...)
2017-01-28 12:22 ` [PATCH v2 06/10] clk: sunxi-ng: Add A80 USB CCU Chen-Yu Tsai
@ 2017-01-28 12:22 ` Chen-Yu Tsai
2017-01-28 12:22 ` [PATCH v2 08/10] ARM: dts: sun8i-a23-q8-tablet: Drop pinmux setting for codec PA gpio Chen-Yu Tsai
` (3 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Chen-Yu Tsai @ 2017-01-28 12:22 UTC (permalink / raw)
To: Maxime Ripard, Rob Herring, Mark Rutland, Michael Turquette,
Stephen Boyd
Cc: Chen-Yu Tsai, linux-clk, linux-arm-kernel, devicetree,
linux-kernel, linux-sunxi
With the A80 SoC, Allwinner grouped and moved some subsystem specific
clock controls to a separate address space, and possibly separate
hardware block.
One such subsystem is the display engine. The main clock control unit
now only has 1 set of bus gate, dram gate, module clock, and reset
control for the entire display subsystem. These feed into a secondary
clock control unit, which has controls for each individual module
of the display pipeline. This block is not documented in the user
manual. Allwinner's kernel was used as the reference.
Add support for the display engine clock controls found on the A80.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
.../devicetree/bindings/clock/sun9i-de.txt | 28 ++
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c | 283 +++++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun9i-a80-de.h | 33 +++
include/dt-bindings/clock/sun9i-a80-de.h | 80 ++++++
include/dt-bindings/reset/sun9i-a80-de.h | 58 +++++
6 files changed, 483 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/sun9i-de.txt
create mode 100644 drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun9i-a80-de.h
create mode 100644 include/dt-bindings/clock/sun9i-a80-de.h
create mode 100644 include/dt-bindings/reset/sun9i-a80-de.h
diff --git a/Documentation/devicetree/bindings/clock/sun9i-de.txt b/Documentation/devicetree/bindings/clock/sun9i-de.txt
new file mode 100644
index 000000000000..fb18f327b97a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/sun9i-de.txt
@@ -0,0 +1,28 @@
+Allwinner A80 Display Engine Clock Control Binding
+--------------------------------------------------
+
+Required properties :
+- compatible: must contain one of the following compatibles:
+ - "allwinner,sun9i-a80-de-clks"
+
+- reg: Must contain the registers base address and length
+- clocks: phandle to the clocks feeding the display engine subsystem.
+ Three are needed:
+ - "mod": the display engine module clock
+ - "dram": the DRAM bus clock for the system
+ - "bus": the bus clock for the whole display engine subsystem
+- clock-names: Must contain the clock names described just above
+- resets: phandle to the reset control for the display engine subsystem.
+- #clock-cells : must contain 1
+- #reset-cells : must contain 1
+
+Example:
+de_clocks: clock@3000000 {
+ compatible = "allwinner,sun9i-a80-de-clks";
+ reg = <0x03000000 0x30>;
+ clocks = <&ccu CLK_DE>, <&ccu CLK_SDRAM>, <&ccu CLK_BUS_DE>;
+ clock-names = "mod", "dram", "bus";
+ resets = <&ccu RST_BUS_DE>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+};
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 8f37ef7fb67d..6feaac0c5600 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -26,4 +26,5 @@ obj-$(CONFIG_SUN8I_A33_CCU) += ccu-sun8i-a33.o
obj-$(CONFIG_SUN8I_H3_CCU) += ccu-sun8i-h3.o
obj-$(CONFIG_SUN8I_V3S_CCU) += ccu-sun8i-v3s.o
obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80.o
+obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-de.o
obj-$(CONFIG_SUN9I_A80_CCU) += ccu-sun9i-a80-usb.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c b/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
new file mode 100644
index 000000000000..3fc27db0a49a
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
@@ -0,0 +1,283 @@
+/*
+ * Copyright (c) 2016 Chen-Yu Tsai. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include "ccu_common.h"
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_reset.h"
+
+#include "ccu-sun9i-a80-de.h"
+
+static SUNXI_CCU_GATE(fe0_clk, "fe0", "fe0-div",
+ 0x00, BIT(0), 0);
+static SUNXI_CCU_GATE(fe1_clk, "fe1", "fe1-div",
+ 0x00, BIT(1), 0);
+static SUNXI_CCU_GATE(fe2_clk, "fe2", "fe2-div",
+ 0x00, BIT(2), 0);
+static SUNXI_CCU_GATE(iep_deu0_clk, "iep-deu0", "de",
+ 0x00, BIT(4), 0);
+static SUNXI_CCU_GATE(iep_deu1_clk, "iep-deu1", "de",
+ 0x00, BIT(5), 0);
+static SUNXI_CCU_GATE(be0_clk, "be0", "be0-div",
+ 0x00, BIT(8), 0);
+static SUNXI_CCU_GATE(be1_clk, "be1", "be1-div",
+ 0x00, BIT(9), 0);
+static SUNXI_CCU_GATE(be2_clk, "be2", "be2-div",
+ 0x00, BIT(10), 0);
+static SUNXI_CCU_GATE(iep_drc0_clk, "iep-drc0", "de",
+ 0x00, BIT(12), 0);
+static SUNXI_CCU_GATE(iep_drc1_clk, "iep-drc1", "de",
+ 0x00, BIT(13), 0);
+static SUNXI_CCU_GATE(merge_clk, "merge", "de",
+ 0x00, BIT(20), 0);
+
+static SUNXI_CCU_GATE(dram_fe0_clk, "dram-fe0", "sdram",
+ 0x04, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_fe1_clk, "dram-fe1", "sdram",
+ 0x04, BIT(1), 0);
+static SUNXI_CCU_GATE(dram_fe2_clk, "dram-fe2", "sdram",
+ 0x04, BIT(2), 0);
+static SUNXI_CCU_GATE(dram_deu0_clk, "dram-deu0", "sdram",
+ 0x04, BIT(4), 0);
+static SUNXI_CCU_GATE(dram_deu1_clk, "dram-deu1", "sdram",
+ 0x04, BIT(5), 0);
+static SUNXI_CCU_GATE(dram_be0_clk, "dram-be0", "sdram",
+ 0x04, BIT(8), 0);
+static SUNXI_CCU_GATE(dram_be1_clk, "dram-be1", "sdram",
+ 0x04, BIT(9), 0);
+static SUNXI_CCU_GATE(dram_be2_clk, "dram-be2", "sdram",
+ 0x04, BIT(10), 0);
+static SUNXI_CCU_GATE(dram_drc0_clk, "dram-drc0", "sdram",
+ 0x04, BIT(12), 0);
+static SUNXI_CCU_GATE(dram_drc1_clk, "dram-drc1", "sdram",
+ 0x04, BIT(13), 0);
+
+static SUNXI_CCU_GATE(bus_fe0_clk, "bus-fe0", "bus-de",
+ 0x08, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_fe1_clk, "bus-fe1", "bus-de",
+ 0x08, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_fe2_clk, "bus-fe2", "bus-de",
+ 0x08, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_deu0_clk, "bus-deu0", "bus-de",
+ 0x08, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_deu1_clk, "bus-deu1", "bus-de",
+ 0x08, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_be0_clk, "bus-be0", "bus-de",
+ 0x08, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_be1_clk, "bus-be1", "bus-de",
+ 0x08, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_be2_clk, "bus-be2", "bus-de",
+ 0x08, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_drc0_clk, "bus-drc0", "bus-de",
+ 0x08, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_drc1_clk, "bus-drc1", "bus-de",
+ 0x08, BIT(13), 0);
+
+static SUNXI_CCU_M(fe0_div_clk, "fe0-div", "de", 0x20, 0, 4, 0);
+static SUNXI_CCU_M(fe1_div_clk, "fe1-div", "de", 0x20, 4, 4, 0);
+static SUNXI_CCU_M(fe2_div_clk, "fe2-div", "de", 0x20, 8, 4, 0);
+static SUNXI_CCU_M(be0_div_clk, "be0-div", "de", 0x20, 16, 4, 0);
+static SUNXI_CCU_M(be1_div_clk, "be1-div", "de", 0x20, 20, 4, 0);
+static SUNXI_CCU_M(be2_div_clk, "be2-div", "de", 0x20, 24, 4, 0);
+
+static struct ccu_common *sun9i_a80_de_clks[] = {
+ &fe0_clk.common,
+ &fe1_clk.common,
+ &fe2_clk.common,
+ &iep_deu0_clk.common,
+ &iep_deu1_clk.common,
+ &be0_clk.common,
+ &be1_clk.common,
+ &be2_clk.common,
+ &iep_drc0_clk.common,
+ &iep_drc1_clk.common,
+ &merge_clk.common,
+
+ &dram_fe0_clk.common,
+ &dram_fe1_clk.common,
+ &dram_fe2_clk.common,
+ &dram_deu0_clk.common,
+ &dram_deu1_clk.common,
+ &dram_be0_clk.common,
+ &dram_be1_clk.common,
+ &dram_be2_clk.common,
+ &dram_drc0_clk.common,
+ &dram_drc1_clk.common,
+
+ &bus_fe0_clk.common,
+ &bus_fe1_clk.common,
+ &bus_fe2_clk.common,
+ &bus_deu0_clk.common,
+ &bus_deu1_clk.common,
+ &bus_be0_clk.common,
+ &bus_be1_clk.common,
+ &bus_be2_clk.common,
+ &bus_drc0_clk.common,
+ &bus_drc1_clk.common,
+
+ &fe0_div_clk.common,
+ &fe1_div_clk.common,
+ &fe2_div_clk.common,
+ &be0_div_clk.common,
+ &be1_div_clk.common,
+ &be2_div_clk.common,
+};
+
+static struct clk_hw_onecell_data sun9i_a80_de_hw_clks = {
+ .hws = {
+ [CLK_FE0] = &fe0_clk.common.hw,
+ [CLK_FE1] = &fe1_clk.common.hw,
+ [CLK_FE2] = &fe2_clk.common.hw,
+ [CLK_IEP_DEU0] = &iep_deu0_clk.common.hw,
+ [CLK_IEP_DEU1] = &iep_deu1_clk.common.hw,
+ [CLK_BE0] = &be0_clk.common.hw,
+ [CLK_BE1] = &be1_clk.common.hw,
+ [CLK_BE2] = &be2_clk.common.hw,
+ [CLK_IEP_DRC0] = &iep_drc0_clk.common.hw,
+ [CLK_IEP_DRC1] = &iep_drc1_clk.common.hw,
+ [CLK_MERGE] = &merge_clk.common.hw,
+
+ [CLK_DRAM_FE0] = &dram_fe0_clk.common.hw,
+ [CLK_DRAM_FE1] = &dram_fe1_clk.common.hw,
+ [CLK_DRAM_FE2] = &dram_fe2_clk.common.hw,
+ [CLK_DRAM_DEU0] = &dram_deu0_clk.common.hw,
+ [CLK_DRAM_DEU1] = &dram_deu1_clk.common.hw,
+ [CLK_DRAM_BE0] = &dram_be0_clk.common.hw,
+ [CLK_DRAM_BE1] = &dram_be1_clk.common.hw,
+ [CLK_DRAM_BE2] = &dram_be2_clk.common.hw,
+ [CLK_DRAM_DRC0] = &dram_drc0_clk.common.hw,
+ [CLK_DRAM_DRC1] = &dram_drc1_clk.common.hw,
+
+ [CLK_BUS_FE0] = &bus_fe0_clk.common.hw,
+ [CLK_BUS_FE1] = &bus_fe1_clk.common.hw,
+ [CLK_BUS_FE2] = &bus_fe2_clk.common.hw,
+ [CLK_BUS_DEU0] = &bus_deu0_clk.common.hw,
+ [CLK_BUS_DEU1] = &bus_deu1_clk.common.hw,
+ [CLK_BUS_BE0] = &bus_be0_clk.common.hw,
+ [CLK_BUS_BE1] = &bus_be1_clk.common.hw,
+ [CLK_BUS_BE2] = &bus_be2_clk.common.hw,
+ [CLK_BUS_DRC0] = &bus_drc0_clk.common.hw,
+ [CLK_BUS_DRC1] = &bus_drc1_clk.common.hw,
+
+ [CLK_FE0_DIV] = &fe0_div_clk.common.hw,
+ [CLK_FE1_DIV] = &fe1_div_clk.common.hw,
+ [CLK_FE2_DIV] = &fe2_div_clk.common.hw,
+ [CLK_BE0_DIV] = &be0_div_clk.common.hw,
+ [CLK_BE1_DIV] = &be1_div_clk.common.hw,
+ [CLK_BE2_DIV] = &be2_div_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun9i_a80_de_resets[] = {
+ [RST_FE0] = { 0x0c, BIT(0) },
+ [RST_FE1] = { 0x0c, BIT(1) },
+ [RST_FE2] = { 0x0c, BIT(2) },
+ [RST_DEU0] = { 0x0c, BIT(4) },
+ [RST_DEU1] = { 0x0c, BIT(5) },
+ [RST_BE0] = { 0x0c, BIT(8) },
+ [RST_BE1] = { 0x0c, BIT(9) },
+ [RST_BE2] = { 0x0c, BIT(10) },
+ [RST_DRC0] = { 0x0c, BIT(12) },
+ [RST_DRC1] = { 0x0c, BIT(13) },
+ [RST_MERGE] = { 0x0c, BIT(20) },
+};
+
+static const struct sunxi_ccu_desc sun9i_a80_de_clk_desc = {
+ .ccu_clks = sun9i_a80_de_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun9i_a80_de_clks),
+
+ .hw_clks = &sun9i_a80_de_hw_clks,
+
+ .resets = sun9i_a80_de_resets,
+ .num_resets = ARRAY_SIZE(sun9i_a80_de_resets),
+};
+
+static int sun9i_a80_de_clk_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct clk *bus_clk;
+ struct reset_control *rstc;
+ void __iomem *reg;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ reg = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(reg))
+ return PTR_ERR(reg);
+
+ bus_clk = devm_clk_get(&pdev->dev, "bus");
+ if (IS_ERR(bus_clk)) {
+ ret = PTR_ERR(bus_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Couldn't get bus clk: %d\n", ret);
+ return ret;
+ }
+
+ rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(rstc)) {
+ ret = PTR_ERR(bus_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "Couldn't get reset control: %d\n", ret);
+ return ret;
+ }
+
+ /* The bus clock needs to be enabled for us to access the registers */
+ ret = clk_prepare_enable(bus_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Couldn't enable bus clk: %d\n", ret);
+ return ret;
+ }
+
+ /* The reset control needs to be asserted for the controls to work */
+ ret = reset_control_deassert(rstc);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Couldn't deassert reset control: %d\n", ret);
+ goto err_disable_clk;
+ }
+
+ ret = sunxi_ccu_probe(pdev->dev.of_node, reg,
+ &sun9i_a80_de_clk_desc);
+ if (ret)
+ goto err_assert_reset;
+
+ return 0;
+
+err_assert_reset:
+ reset_control_assert(rstc);
+err_disable_clk:
+ clk_disable_unprepare(bus_clk);
+ return ret;
+}
+
+static const struct of_device_id sun9i_a80_de_clk_ids[] = {
+ { .compatible = "allwinner,sun9i-a80-de-clks" },
+ { }
+};
+
+static struct platform_driver sun9i_a80_de_clk_driver = {
+ .probe = sun9i_a80_de_clk_probe,
+ .driver = {
+ .name = "sun9i-a80-de-clks",
+ .of_match_table = sun9i_a80_de_clk_ids,
+ },
+};
+builtin_platform_driver(sun9i_a80_de_clk_driver);
diff --git a/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.h b/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.h
new file mode 100644
index 000000000000..a4769041e40f
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2016 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN9I_A80_DE_H_
+#define _CCU_SUN9I_A80_DE_H_
+
+#include <dt-bindings/clock/sun9i-a80-de.h>
+#include <dt-bindings/reset/sun9i-a80-de.h>
+
+/* Intermediary clock dividers are not exported */
+#define CLK_FE0_DIV 31
+#define CLK_FE1_DIV 32
+#define CLK_FE2_DIV 33
+#define CLK_BE0_DIV 34
+#define CLK_BE1_DIV 35
+#define CLK_BE2_DIV 36
+
+#define CLK_NUMBER (CLK_BE2_DIV + 1)
+
+#endif /* _CCU_SUN9I_A80_DE_H_ */
diff --git a/include/dt-bindings/clock/sun9i-a80-de.h b/include/dt-bindings/clock/sun9i-a80-de.h
new file mode 100644
index 000000000000..3dad6c3cd131
--- /dev/null
+++ b/include/dt-bindings/clock/sun9i-a80-de.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SUN9I_A80_DE_H_
+#define _DT_BINDINGS_CLOCK_SUN9I_A80_DE_H_
+
+#define CLK_FE0 0
+#define CLK_FE1 1
+#define CLK_FE2 2
+#define CLK_IEP_DEU0 3
+#define CLK_IEP_DEU1 4
+#define CLK_BE0 5
+#define CLK_BE1 6
+#define CLK_BE2 7
+#define CLK_IEP_DRC0 8
+#define CLK_IEP_DRC1 9
+#define CLK_MERGE 10
+
+#define CLK_DRAM_FE0 11
+#define CLK_DRAM_FE1 12
+#define CLK_DRAM_FE2 13
+#define CLK_DRAM_DEU0 14
+#define CLK_DRAM_DEU1 15
+#define CLK_DRAM_BE0 16
+#define CLK_DRAM_BE1 17
+#define CLK_DRAM_BE2 18
+#define CLK_DRAM_DRC0 19
+#define CLK_DRAM_DRC1 20
+
+#define CLK_BUS_FE0 21
+#define CLK_BUS_FE1 22
+#define CLK_BUS_FE2 23
+#define CLK_BUS_DEU0 24
+#define CLK_BUS_DEU1 25
+#define CLK_BUS_BE0 26
+#define CLK_BUS_BE1 27
+#define CLK_BUS_BE2 28
+#define CLK_BUS_DRC0 29
+#define CLK_BUS_DRC1 30
+
+#endif /* _DT_BINDINGS_CLOCK_SUN9I_A80_DE_H_ */
diff --git a/include/dt-bindings/reset/sun9i-a80-de.h b/include/dt-bindings/reset/sun9i-a80-de.h
new file mode 100644
index 000000000000..205072770171
--- /dev/null
+++ b/include/dt-bindings/reset/sun9i-a80-de.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RESET_SUN9I_A80_DE_H_
+#define _DT_BINDINGS_RESET_SUN9I_A80_DE_H_
+
+#define RST_FE0 0
+#define RST_FE1 1
+#define RST_FE2 2
+#define RST_DEU0 3
+#define RST_DEU1 4
+#define RST_BE0 5
+#define RST_BE1 6
+#define RST_BE2 7
+#define RST_DRC0 8
+#define RST_DRC1 9
+#define RST_MERGE 10
+
+#endif /* _DT_BINDINGS_RESET_SUN9I_A80_DE_H_ */
--
2.11.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v2 10/10] ARM: dts: sun9i: Switch to new clock bindings
2017-01-28 12:22 [PATCH v2 00/10] clk: sunxi-ng: Add support for A80 CCUs Chen-Yu Tsai
` (8 preceding siblings ...)
2017-01-28 12:22 ` [PATCH v2 09/10] ARM: dts: sunxi: Remove no longer used pinctrl/sun4i-a10.h header Chen-Yu Tsai
@ 2017-01-28 12:22 ` Chen-Yu Tsai
2017-01-30 7:42 ` [PATCH v2 00/10] clk: sunxi-ng: Add support for A80 CCUs Maxime Ripard
10 siblings, 0 replies; 12+ messages in thread
From: Chen-Yu Tsai @ 2017-01-28 12:22 UTC (permalink / raw)
To: Maxime Ripard, Rob Herring, Mark Rutland, Michael Turquette,
Stephen Boyd
Cc: Chen-Yu Tsai, linux-clk, linux-arm-kernel, devicetree,
linux-kernel, linux-sunxi
Now that we have a full clock driver for sun9i, switch to it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun9i-a80.dtsi | 404 +++++++++++----------------------------
1 file changed, 107 insertions(+), 297 deletions(-)
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 18b35fc23f46..b763c61cacba 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -46,6 +46,13 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun9i-a80-ccu.h>
+#include <dt-bindings/clock/sun9i-a80-de.h>
+#include <dt-bindings/clock/sun9i-a80-usb.h>
+#include <dt-bindings/reset/sun9i-a80-ccu.h>
+#include <dt-bindings/reset/sun9i-a80-de.h>
+#include <dt-bindings/reset/sun9i-a80-usb.h>
+
/ {
interrupt-parent = <&gic>;
@@ -157,228 +164,13 @@
clock-output-names = "osc32k";
};
- usb_mod_clk: clk@00a08000 {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "allwinner,sun9i-a80-usb-mod-clk";
- reg = <0x00a08000 0x4>;
- clocks = <&ahb1_gates 1>;
- clock-output-names = "usb0_ahb", "usb_ohci0",
- "usb1_ahb", "usb_ohci1",
- "usb2_ahb", "usb_ohci2";
- };
-
- usb_phy_clk: clk@00a08004 {
- #clock-cells = <1>;
- #reset-cells = <1>;
- compatible = "allwinner,sun9i-a80-usb-phy-clk";
- reg = <0x00a08004 0x4>;
- clocks = <&ahb1_gates 1>;
- clock-output-names = "usb_phy0", "usb_hsic1_480M",
- "usb_phy1", "usb_hsic2_480M",
- "usb_phy2", "usb_hsic_12M";
- };
-
- pll3: clk@06000008 {
- /* placeholder until implemented */
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-rate = <0>;
- clock-output-names = "pll3";
- };
-
- pll4: clk@0600000c {
- #clock-cells = <0>;
- compatible = "allwinner,sun9i-a80-pll4-clk";
- reg = <0x0600000c 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll4";
- };
-
- pll12: clk@0600002c {
- #clock-cells = <0>;
- compatible = "allwinner,sun9i-a80-pll4-clk";
- reg = <0x0600002c 0x4>;
- clocks = <&osc24M>;
- clock-output-names = "pll12";
- };
-
- gt_clk: clk@0600005c {
- #clock-cells = <0>;
- compatible = "allwinner,sun9i-a80-gt-clk";
- reg = <0x0600005c 0x4>;
- clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>;
- clock-output-names = "gt";
- };
-
- ahb0: clk@06000060 {
- #clock-cells = <0>;
- compatible = "allwinner,sun9i-a80-ahb-clk";
- reg = <0x06000060 0x4>;
- clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>;
- clock-output-names = "ahb0";
- };
-
- ahb1: clk@06000064 {
- #clock-cells = <0>;
- compatible = "allwinner,sun9i-a80-ahb-clk";
- reg = <0x06000064 0x4>;
- clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>;
- clock-output-names = "ahb1";
- };
-
- ahb2: clk@06000068 {
- #clock-cells = <0>;
- compatible = "allwinner,sun9i-a80-ahb-clk";
- reg = <0x06000068 0x4>;
- clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>;
- clock-output-names = "ahb2";
- };
-
- apb0: clk@06000070 {
- #clock-cells = <0>;
- compatible = "allwinner,sun9i-a80-apb0-clk";
- reg = <0x06000070 0x4>;
- clocks = <&osc24M>, <&pll4>;
- clock-output-names = "apb0";
- };
-
- apb1: clk@06000074 {
- #clock-cells = <0>;
- compatible = "allwinner,sun9i-a80-apb1-clk";
- reg = <0x06000074 0x4>;
- clocks = <&osc24M>, <&pll4>;
- clock-output-names = "apb1";
- };
-
- cci400_clk: clk@06000078 {
- #clock-cells = <0>;
- compatible = "allwinner,sun9i-a80-gt-clk";
- reg = <0x06000078 0x4>;
- clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>;
- clock-output-names = "cci400";
- };
-
- mmc0_clk: clk@06000410 {
- #clock-cells = <1>;
- compatible = "allwinner,sun9i-a80-mmc-clk";
- reg = <0x06000410 0x4>;
- clocks = <&osc24M>, <&pll4>;
- clock-output-names = "mmc0", "mmc0_output",
- "mmc0_sample";
- };
-
- mmc1_clk: clk@06000414 {
- #clock-cells = <1>;
- compatible = "allwinner,sun9i-a80-mmc-clk";
- reg = <0x06000414 0x4>;
- clocks = <&osc24M>, <&pll4>;
- clock-output-names = "mmc1", "mmc1_output",
- "mmc1_sample";
- };
-
- mmc2_clk: clk@06000418 {
- #clock-cells = <1>;
- compatible = "allwinner,sun9i-a80-mmc-clk";
- reg = <0x06000418 0x4>;
- clocks = <&osc24M>, <&pll4>;
- clock-output-names = "mmc2", "mmc2_output",
- "mmc2_sample";
- };
-
- mmc3_clk: clk@0600041c {
- #clock-cells = <1>;
- compatible = "allwinner,sun9i-a80-mmc-clk";
- reg = <0x0600041c 0x4>;
- clocks = <&osc24M>, <&pll4>;
- clock-output-names = "mmc3", "mmc3_output",
- "mmc3_sample";
- };
-
- ahb0_gates: clk@06000580 {
- #clock-cells = <1>;
- compatible = "allwinner,sun9i-a80-ahb0-gates-clk";
- reg = <0x06000580 0x4>;
- clocks = <&ahb0>;
- clock-indices = <0>, <1>, <3>,
- <5>, <8>, <12>,
- <13>, <14>,
- <15>, <16>, <18>,
- <20>, <21>, <22>,
- <23>;
- clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu",
- "ahb0_ss", "ahb0_sd", "ahb0_nand1",
- "ahb0_nand0", "ahb0_sdram",
- "ahb0_mipi_hsi", "ahb0_sata", "ahb0_ts",
- "ahb0_spi0", "ahb0_spi1", "ahb0_spi2",
- "ahb0_spi3";
- };
-
- ahb1_gates: clk@06000584 {
- #clock-cells = <1>;
- compatible = "allwinner,sun9i-a80-ahb1-gates-clk";
- reg = <0x06000584 0x4>;
- clocks = <&ahb1>;
- clock-indices = <0>, <1>,
- <17>, <21>,
- <22>, <23>,
- <24>;
- clock-output-names = "ahb1_usbotg", "ahb1_usbhci",
- "ahb1_gmac", "ahb1_msgbox",
- "ahb1_spinlock", "ahb1_hstimer",
- "ahb1_dma";
- };
-
- ahb2_gates: clk@06000588 {
- #clock-cells = <1>;
- compatible = "allwinner,sun9i-a80-ahb2-gates-clk";
- reg = <0x06000588 0x4>;
- clocks = <&ahb2>;
- clock-indices = <0>, <1>,
- <2>, <4>, <5>,
- <7>, <8>, <11>;
- clock-output-names = "ahb2_lcd0", "ahb2_lcd1",
- "ahb2_edp", "ahb2_csi", "ahb2_hdmi",
- "ahb2_de", "ahb2_mp", "ahb2_mipi_dsi";
- };
-
- apb0_gates: clk@06000590 {
- #clock-cells = <1>;
- compatible = "allwinner,sun9i-a80-apb0-gates-clk";
- reg = <0x06000590 0x4>;
- clocks = <&apb0>;
- clock-indices = <1>, <5>,
- <11>, <12>, <13>,
- <15>, <17>, <18>,
- <19>;
- clock-output-names = "apb0_spdif", "apb0_pio",
- "apb0_ac97", "apb0_i2s0", "apb0_i2s1",
- "apb0_lradc", "apb0_gpadc", "apb0_twd",
- "apb0_cirtx";
- };
-
- apb1_gates: clk@06000594 {
- #clock-cells = <1>;
- compatible = "allwinner,sun9i-a80-apb1-gates-clk";
- reg = <0x06000594 0x4>;
- clocks = <&apb1>;
- clock-indices = <0>, <1>,
- <2>, <3>, <4>,
- <16>, <17>,
- <18>, <19>,
- <20>, <21>;
- clock-output-names = "apb1_i2c0", "apb1_i2c1",
- "apb1_i2c2", "apb1_i2c3", "apb1_i2c4",
- "apb1_uart0", "apb1_uart1",
- "apb1_uart2", "apb1_uart3",
- "apb1_uart4", "apb1_uart5";
- };
-
cpus_clk: clk@08001410 {
compatible = "allwinner,sun9i-a80-cpus-clk";
reg = <0x08001410 0x4>;
#clock-cells = <0>;
- clocks = <&osc32k>, <&osc24M>, <&pll4>, <&pll3>;
+ clocks = <&osc32k>, <&osc24M>,
+ <&ccu CLK_PLL_PERIPH0>,
+ <&ccu CLK_PLL_AUDIO>;
clock-output-names = "cpus";
};
@@ -451,8 +243,8 @@
compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
reg = <0x00a00000 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_mod_clk 1>;
- resets = <&usb_mod_clk 17>;
+ clocks = <&usb_clocks CLK_BUS_HCI0>;
+ resets = <&usb_clocks RST_USB0_HCI>;
phys = <&usbphy1>;
phy-names = "usb";
status = "disabled";
@@ -462,8 +254,9 @@
compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
reg = <0x00a00400 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_mod_clk 1>, <&usb_mod_clk 2>;
- resets = <&usb_mod_clk 17>;
+ clocks = <&usb_clocks CLK_BUS_HCI0>,
+ <&usb_clocks CLK_USB_OHCI0>;
+ resets = <&usb_clocks RST_USB0_HCI>;
phys = <&usbphy1>;
phy-names = "usb";
status = "disabled";
@@ -472,9 +265,9 @@
usbphy1: phy@00a00800 {
compatible = "allwinner,sun9i-a80-usb-phy";
reg = <0x00a00800 0x4>;
- clocks = <&usb_phy_clk 1>;
+ clocks = <&usb_clocks CLK_USB0_PHY>;
clock-names = "phy";
- resets = <&usb_phy_clk 17>;
+ resets = <&usb_clocks RST_USB0_PHY>;
reset-names = "phy";
status = "disabled";
#phy-cells = <0>;
@@ -484,8 +277,8 @@
compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
reg = <0x00a01000 0x100>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_mod_clk 3>;
- resets = <&usb_mod_clk 18>;
+ clocks = <&usb_clocks CLK_BUS_HCI1>;
+ resets = <&usb_clocks RST_USB1_HCI>;
phys = <&usbphy2>;
phy-names = "usb";
status = "disabled";
@@ -494,11 +287,16 @@
usbphy2: phy@00a01800 {
compatible = "allwinner,sun9i-a80-usb-phy";
reg = <0x00a01800 0x4>;
- clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
- <&usb_phy_clk 3>;
- clock-names = "hsic_480M", "hsic_12M", "phy";
- resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>;
- reset-names = "hsic", "phy";
+ clocks = <&usb_clocks CLK_USB1_HSIC>,
+ <&usb_clocks CLK_USB_HSIC>,
+ <&usb_clocks CLK_USB1_PHY>;
+ clock-names = "hsic_480M",
+ "hsic_12M",
+ "phy";
+ resets = <&usb_clocks RST_USB1_HSIC>,
+ <&usb_clocks RST_USB1_PHY>;
+ reset-names = "hsic",
+ "phy";
status = "disabled";
#phy-cells = <0>;
/* usb1 is always used with HSIC */
@@ -509,8 +307,8 @@
compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
reg = <0x00a02000 0x100>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_mod_clk 5>;
- resets = <&usb_mod_clk 19>;
+ clocks = <&usb_clocks CLK_BUS_HCI2>;
+ resets = <&usb_clocks RST_USB2_HCI>;
phys = <&usbphy3>;
phy-names = "usb";
status = "disabled";
@@ -520,8 +318,9 @@
compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
reg = <0x00a02400 0x100>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&usb_mod_clk 5>, <&usb_mod_clk 6>;
- resets = <&usb_mod_clk 19>;
+ clocks = <&usb_clocks CLK_BUS_HCI2>,
+ <&usb_clocks CLK_USB_OHCI2>;
+ resets = <&usb_clocks RST_USB2_HCI>;
phys = <&usbphy3>;
phy-names = "usb";
status = "disabled";
@@ -530,20 +329,35 @@
usbphy3: phy@00a02800 {
compatible = "allwinner,sun9i-a80-usb-phy";
reg = <0x00a02800 0x4>;
- clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>,
- <&usb_phy_clk 5>;
- clock-names = "hsic_480M", "hsic_12M", "phy";
- resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>;
- reset-names = "hsic", "phy";
+ clocks = <&usb_clocks CLK_USB2_HSIC>,
+ <&usb_clocks CLK_USB_HSIC>,
+ <&usb_clocks CLK_USB2_PHY>;
+ clock-names = "hsic_480M",
+ "hsic_12M",
+ "phy";
+ resets = <&usb_clocks RST_USB2_HSIC>,
+ <&usb_clocks RST_USB2_PHY>;
+ reset-names = "hsic",
+ "phy";
status = "disabled";
#phy-cells = <0>;
};
+ usb_clocks: clock@00a08000 {
+ compatible = "allwinner,sun9i-a80-usb-clks";
+ reg = <0x00a08000 0x8>;
+ clocks = <&ccu CLK_BUS_USB>, <&osc24M>;
+ clock-names = "bus", "hosc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
mmc0: mmc@01c0f000 {
compatible = "allwinner,sun9i-a80-mmc";
reg = <0x01c0f000 0x1000>;
- clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>,
- <&mmc0_clk 1>, <&mmc0_clk 2>;
+ clocks = <&mmc_config_clk 0>, <&ccu CLK_MMC0>,
+ <&ccu CLK_MMC0_OUTPUT>,
+ <&ccu CLK_MMC0_SAMPLE>;
clock-names = "ahb", "mmc", "output", "sample";
resets = <&mmc_config_clk 0>;
reset-names = "ahb";
@@ -556,8 +370,9 @@
mmc1: mmc@01c10000 {
compatible = "allwinner,sun9i-a80-mmc";
reg = <0x01c10000 0x1000>;
- clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>,
- <&mmc1_clk 1>, <&mmc1_clk 2>;
+ clocks = <&mmc_config_clk 1>, <&ccu CLK_MMC1>,
+ <&ccu CLK_MMC1_OUTPUT>,
+ <&ccu CLK_MMC1_SAMPLE>;
clock-names = "ahb", "mmc", "output", "sample";
resets = <&mmc_config_clk 1>;
reset-names = "ahb";
@@ -570,8 +385,9 @@
mmc2: mmc@01c11000 {
compatible = "allwinner,sun9i-a80-mmc";
reg = <0x01c11000 0x1000>;
- clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>,
- <&mmc2_clk 1>, <&mmc2_clk 2>;
+ clocks = <&mmc_config_clk 2>, <&ccu CLK_MMC2>,
+ <&ccu CLK_MMC2_OUTPUT>,
+ <&ccu CLK_MMC2_SAMPLE>;
clock-names = "ahb", "mmc", "output", "sample";
resets = <&mmc_config_clk 2>;
reset-names = "ahb";
@@ -584,8 +400,9 @@
mmc3: mmc@01c12000 {
compatible = "allwinner,sun9i-a80-mmc";
reg = <0x01c12000 0x1000>;
- clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>,
- <&mmc3_clk 1>, <&mmc3_clk 2>;
+ clocks = <&mmc_config_clk 3>, <&ccu CLK_MMC3>,
+ <&ccu CLK_MMC3_OUTPUT>,
+ <&ccu CLK_MMC3_SAMPLE>;
clock-names = "ahb", "mmc", "output", "sample";
resets = <&mmc_config_clk 3>;
reset-names = "ahb";
@@ -598,9 +415,9 @@
mmc_config_clk: clk@01c13000 {
compatible = "allwinner,sun9i-a80-mmc-config-clk";
reg = <0x01c13000 0x10>;
- clocks = <&ahb0_gates 8>;
+ clocks = <&ccu CLK_BUS_MMC>;
clock-names = "ahb";
- resets = <&ahb0_resets 8>;
+ resets = <&ccu RST_BUS_MMC>;
reset-names = "ahb";
#clock-cells = <1>;
#reset-cells = <1>;
@@ -619,34 +436,27 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
- ahb0_resets: reset@060005a0 {
- #reset-cells = <1>;
- compatible = "allwinner,sun6i-a31-clock-reset";
- reg = <0x060005a0 0x4>;
- };
-
- ahb1_resets: reset@060005a4 {
- #reset-cells = <1>;
- compatible = "allwinner,sun6i-a31-clock-reset";
- reg = <0x060005a4 0x4>;
- };
-
- ahb2_resets: reset@060005a8 {
- #reset-cells = <1>;
- compatible = "allwinner,sun6i-a31-clock-reset";
- reg = <0x060005a8 0x4>;
- };
-
- apb0_resets: reset@060005b0 {
+ de_clocks: clock@03000000 {
+ compatible = "allwinner,sun9i-a80-de-clks";
+ reg = <0x03000000 0x30>;
+ clocks = <&ccu CLK_DE>,
+ <&ccu CLK_SDRAM>,
+ <&ccu CLK_BUS_DE>;
+ clock-names = "mod",
+ "dram",
+ "bus";
+ resets = <&ccu RST_BUS_DE>;
+ #clock-cells = <1>;
#reset-cells = <1>;
- compatible = "allwinner,sun6i-a31-clock-reset";
- reg = <0x060005b0 0x4>;
};
- apb1_resets: reset@060005b4 {
+ ccu: clock@06000000 {
+ compatible = "allwinner,sun9i-a80-ccu";
+ reg = <0x06000000 0x800>;
+ clocks = <&osc24M>, <&osc32k>;
+ clock-names = "hosc", "losc";
+ #clock-cells = <1>;
#reset-cells = <1>;
- compatible = "allwinner,sun6i-a31-clock-reset";
- reg = <0x060005b4 0x4>;
};
timer@06000c00 {
@@ -676,7 +486,7 @@
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
@@ -732,8 +542,8 @@
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 16>;
- resets = <&apb1_resets 16>;
+ clocks = <&ccu CLK_BUS_UART0>;
+ resets = <&ccu RST_BUS_UART0>;
status = "disabled";
};
@@ -743,8 +553,8 @@
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 17>;
- resets = <&apb1_resets 17>;
+ clocks = <&ccu CLK_BUS_UART1>;
+ resets = <&ccu RST_BUS_UART1>;
status = "disabled";
};
@@ -754,8 +564,8 @@
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 18>;
- resets = <&apb1_resets 18>;
+ clocks = <&ccu CLK_BUS_UART2>;
+ resets = <&ccu RST_BUS_UART2>;
status = "disabled";
};
@@ -765,8 +575,8 @@
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 19>;
- resets = <&apb1_resets 19>;
+ clocks = <&ccu CLK_BUS_UART3>;
+ resets = <&ccu RST_BUS_UART3>;
status = "disabled";
};
@@ -776,8 +586,8 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 20>;
- resets = <&apb1_resets 20>;
+ clocks = <&ccu CLK_BUS_UART4>;
+ resets = <&ccu RST_BUS_UART4>;
status = "disabled";
};
@@ -787,8 +597,8 @@
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&apb1_gates 21>;
- resets = <&apb1_resets 21>;
+ clocks = <&ccu CLK_BUS_UART5>;
+ resets = <&ccu RST_BUS_UART5>;
status = "disabled";
};
@@ -796,8 +606,8 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07002800 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 0>;
- resets = <&apb1_resets 0>;
+ clocks = <&ccu CLK_BUS_I2C0>;
+ resets = <&ccu RST_BUS_I2C0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -807,8 +617,8 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07002c00 0x400>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 1>;
- resets = <&apb1_resets 1>;
+ clocks = <&ccu CLK_BUS_I2C1>;
+ resets = <&ccu RST_BUS_I2C1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -818,8 +628,8 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07003000 0x400>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 2>;
- resets = <&apb1_resets 2>;
+ clocks = <&ccu CLK_BUS_I2C2>;
+ resets = <&ccu RST_BUS_I2C2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -829,8 +639,8 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07003400 0x400>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 3>;
- resets = <&apb1_resets 3>;
+ clocks = <&ccu CLK_BUS_I2C3>;
+ resets = <&ccu RST_BUS_I2C3>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -840,8 +650,8 @@
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07003800 0x400>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb1_gates 4>;
- resets = <&apb1_resets 4>;
+ clocks = <&ccu CLK_BUS_I2C4>;
+ resets = <&ccu RST_BUS_I2C4>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
--
2.11.0
^ permalink raw reply related [flat|nested] 12+ messages in thread