[PATCH v2 0/8] clk: sunxi-ng: Add support for A83T CCU

[PATCH v2 0/8] clk: sunxi-ng: Add support for A83T CCU

[Chen-Yu Tsai]

Hi everyone,

This is v2 of my A83T CCU series. This is for 4.13.

Changes since v1:

  - Dropped two patches that were merged

  - Added clk core flag to disable caching of clock phases

  - Added support for multiple variable pre-dividers

  - Merged "pll-periph-ahb1" pre-divider clock into "ahb1" clock
    with multiple variable pre-dividers

  - Introduced new class of phase clocks that return -ENOTSUPP
    when the clock is in new timing mode

  - Force mmc2 clock to new timing mode

  - Added back mmc2 output and sample clocks

  - Fixed bit ops for forcing audio PLL configuration

  - Added requirement for "losc" clock in device tree binding

  - Stripped leading 0 in device node name

  - Updated subject prefixes for various patches

Patch 1 adds a compatible string for the A83T CCU to the sunxi-ccu
bindings.

Patch 2 adds a CLK_GET_PHASE_NOCACHE flag to the clk core, asking it
not to cache clock phase values. This is similar to CLK_GET_RATE_NOCACHE.
Patch 5 has a compile time dependency on this patch, for the flag value.

Patch 3 adds a new class of phase clocks that check the new timing mode
bit, and returns an error if it is set, which indicates the phase delays
no longer apply. This is a clean way to signal which timing mode the mmc
clock is in, without using any custom functions or callbacks. We don't
support runtime switching of modes.

Patch 4 adds support for multiple variable pre-dividers to the sunxi-ng
mux class.

Patch 5 adds the driver for the A83T CCU.

Patch 6 adds the CCU device nodes, and fixes up any existing clock
phandles in the dtsi, without using the macros.

Patch 7 sets the clock accuracy for the main oscillator.

Patch 8 is for the next -rc2, switch the clock indices from raw numbers
to macros we introduced with the driver. This will be updated if more
peripherals are introduced in the same cycle.

Let me know what you think.

Cover letter excerpt from v1:

This is yet another series that adds support for the A83T CCU.
The A83T CCU has a mix of new styled (like the A80) clocks at
old (like A3x) offsets. Some differences include:

  - D1/D2 style PLL clocks
  - divisible audio module clocks
  - new timing mode for mmc2 module clock


Regards
ChenYu

Chen-Yu Tsai (8):
  dt-bindings: clock: sunxi-ccu: Add compatible string for A83T CCU
  clk: Provide option to query hardware for clk phase
  clk: sunxi-ng: Add class of phase clocks supporting MMC new timing
    modes
  clk: sunxi-ng: Support multiple variable pre-dividers
  clk: sunxi-ng: Add driver for A83T CCU
  ARM: sun8i: a83t: Add CCU device nodes
  ARM: sun8i: a83t: Set clock accuracy for 24MHz oscillator
  ARM: sun8i: a83t: Switch to CCU device tree binding macros

 .../devicetree/bindings/clock/sunxi-ccu.txt        |   2 +
 arch/arm/boot/dts/sun8i-a83t.dtsi                  |  19 +-
 drivers/clk/clk.c                                  |   6 +-
 drivers/clk/sunxi-ng/Kconfig                       |  10 +
 drivers/clk/sunxi-ng/Makefile                      |   1 +
 drivers/clk/sunxi-ng/ccu-sun50i-a64.c              |  10 +-
 drivers/clk/sunxi-ng/ccu-sun6i-a31.c               |  10 +-
 drivers/clk/sunxi-ng/ccu-sun8i-a23.c               |  10 +-
 drivers/clk/sunxi-ng/ccu-sun8i-a33.c               |  10 +-
 drivers/clk/sunxi-ng/ccu-sun8i-a83t.c              | 911 +++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-sun8i-a83t.h              |  64 ++
 drivers/clk/sunxi-ng/ccu-sun8i-h3.c                |  10 +-
 drivers/clk/sunxi-ng/ccu-sun8i-r.c                 |  10 +-
 drivers/clk/sunxi-ng/ccu-sun8i-v3s.c               |  10 +-
 drivers/clk/sunxi-ng/ccu_mux.c                     |  15 +-
 drivers/clk/sunxi-ng/ccu_mux.h                     |  13 +-
 drivers/clk/sunxi-ng/ccu_phase.c                   |  47 ++
 drivers/clk/sunxi-ng/ccu_phase.h                   |  16 +
 include/dt-bindings/clock/sun8i-a83t-ccu.h         | 140 ++++
 include/dt-bindings/reset/sun8i-a83t-ccu.h         |  98 +++
 include/linux/clk-provider.h                       |   1 +
 21 files changed, 1363 insertions(+), 50 deletions(-)
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-a83t.h
 create mode 100644 include/dt-bindings/clock/sun8i-a83t-ccu.h
 create mode 100644 include/dt-bindings/reset/sun8i-a83t-ccu.h

-- 
2.11.0

[PATCH v2 1/8] dt-bindings: clock: sunxi-ccu: Add compatible string for A83T CCU

[Chen-Yu Tsai]

The A83T clock control unit is a hybrid of some new style clock designs
from the A80, and old style layout from the other Allwinner SoCs.

Like the A80, the SoC does not have a low speed 32.768 kHz oscillator.
Unlike the A80, there is no clock input either. The only low speed clock
available is the internal oscillator which runs at around 16 MHz,
divided by 512, yielding a low speed clock around 31.250 kHz.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 Documentation/devicetree/bindings/clock/sunxi-ccu.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
index e9c5a1d9834a..34b2a9249a94 100644
--- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
@@ -6,6 +6,7 @@ Required properties :
 		- "allwinner,sun6i-a31-ccu"
 		- "allwinner,sun8i-a23-ccu"
 		- "allwinner,sun8i-a33-ccu"
+		- "allwinner,sun8i-a83t-ccu"
 		- "allwinner,sun8i-h3-ccu"
 		- "allwinner,sun8i-h3-r-ccu"
 		- "allwinner,sun8i-v3s-ccu"
@@ -18,6 +19,7 @@ Required properties :
 - clocks: phandle to the oscillators feeding the CCU. Two are needed:
   - "hosc": the high frequency oscillator (usually at 24MHz)
   - "losc": the low frequency oscillator (usually at 32kHz)
+	    On the A83T, this is the internal 16MHz oscillator divided by 512
 - clock-names: Must contain the clock names described just above
 - #clock-cells : must contain 1
 - #reset-cells : must contain 1
-- 
2.11.0

[PATCH v2 2/8] clk: Provide option to query hardware for clk phase

[Chen-Yu Tsai]

On some hardware, the clk phase is tied to the parent clk's
rate and some clk delay programmed into the hardware. As the
parent clk rate changes, so does the clk phase.

Add a clk flag specifying not to use the cached clk phase,
but always query the hardware for it.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/clk/clk.c            | 6 +++++-
 include/linux/clk-provider.h | 1 +
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 67201f67a14a..05e2481c1340 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1929,7 +1929,11 @@ static int clk_core_get_phase(struct clk_core *core)
 	int ret;
 
 	clk_prepare_lock();
-	ret = core->phase;
+	if (core && (core->flags & CLK_GET_PHASE_NOCACHE) &&
+	    core->ops->get_phase)
+		ret = core->ops->get_phase(core->hw);
+	else
+		ret = core->phase;
 	clk_prepare_unlock();
 
 	return ret;
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index a428aec36ace..e2e856b1a81f 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -35,6 +35,7 @@
 #define CLK_IS_CRITICAL		BIT(11) /* do not gate, ever */
 /* parents need enable during gate/ungate, set rate and re-parent */
 #define CLK_OPS_PARENT_ENABLE	BIT(12)
+#define CLK_GET_PHASE_NOCACHE	BIT(13) /* do not use the cached clk phase */
 
 struct clk;
 struct clk_hw;
-- 
2.11.0

[PATCH v2 3/8] clk: sunxi-ng: Add class of phase clocks supporting MMC new timing modes

[Chen-Yu Tsai]

The MMC clocks on newer SoCs, such as the A83T and H3, support the
"new timing mode". Under this mode, the output of the clock is divided
by 2, and the clock delays no longer apply.

Due to how the clock tree is modeled and setup, we need to model
this function in two places, the master mmc clock and the two
child phase clocks. In the mmc clock, we can easily model the
mode bit as an extra variable post-divider. In the phase clocks,
we check the bit and return -ENOTSUPP if the bit is set, signaling
that the phase clocks are not to be used.

This patch introduces a class of phase clocks that checks the
timing mode bit.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/clk/sunxi-ng/ccu_phase.c | 47 ++++++++++++++++++++++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu_phase.h | 16 ++++++++++++++
 2 files changed, 63 insertions(+)

diff --git a/drivers/clk/sunxi-ng/ccu_phase.c b/drivers/clk/sunxi-ng/ccu_phase.c
index 400c58ad72fd..e6ff7551c855 100644
--- a/drivers/clk/sunxi-ng/ccu_phase.c
+++ b/drivers/clk/sunxi-ng/ccu_phase.c
@@ -8,6 +8,7 @@
  * the License, or (at your option) any later version.
  */
 
+#include <linux/bitops.h>
 #include <linux/clk-provider.h>
 #include <linux/spinlock.h>
 
@@ -124,3 +125,49 @@ const struct clk_ops ccu_phase_ops = {
 	.get_phase	= ccu_phase_get_phase,
 	.set_phase	= ccu_phase_set_phase,
 };
+
+/*
+ * The MMC clocks on newer SoCs support the "new timing mode". Under
+ * this mode, the output of the clock is divided by 2, and the clock
+ * delays no longer apply.
+ *
+ * Due to how the clock tree is modeled and setup, we need to model
+ * this function in two places, the master mmc clock and the two
+ * child phase clocks. In the mmc clock, we can easily model the
+ * mode bit as an extra variable post-divider. In the phase clocks,
+ * we check the bit and return -ENOTSUPP if the bit is set, signaling
+ * that the phase clocks are not to be used.
+ *
+ * We do not support runtime configuration of the modes. Instead a
+ * mode is enforced at CCU probe time.
+ */
+#define CCU_MMC_NEW_TIMING_MODE	    BIT(30)
+
+static int ccu_phase_mmc_new_timing_get_phase(struct clk_hw *hw)
+{
+	struct ccu_phase *phase = hw_to_ccu_phase(hw);
+	u32 reg;
+
+	reg = readl(phase->common.base + phase->common.reg);
+	if (reg & CCU_MMC_NEW_TIMING_MODE)
+		return -ENOTSUPP;
+
+	return ccu_phase_get_phase(hw);
+}
+
+static int ccu_phase_mmc_new_timing_set_phase(struct clk_hw *hw, int degrees)
+{
+	struct ccu_phase *phase = hw_to_ccu_phase(hw);
+	u32 reg;
+
+	reg = readl(phase->common.base + phase->common.reg);
+	if (reg & CCU_MMC_NEW_TIMING_MODE)
+		return -ENOTSUPP;
+
+	return ccu_phase_set_phase(hw, degrees);
+}
+
+const struct clk_ops ccu_phase_mmc_new_timing_ops = {
+	.get_phase	= ccu_phase_mmc_new_timing_get_phase,
+	.set_phase	= ccu_phase_mmc_new_timing_set_phase,
+};
diff --git a/drivers/clk/sunxi-ng/ccu_phase.h b/drivers/clk/sunxi-ng/ccu_phase.h
index 75a091a4c565..c514d1798cdd 100644
--- a/drivers/clk/sunxi-ng/ccu_phase.h
+++ b/drivers/clk/sunxi-ng/ccu_phase.h
@@ -38,6 +38,20 @@ struct ccu_phase {
 		}							\
 	}
 
+#define SUNXI_CCU_PHASE_MMC_NEW_TIMING(_struct, _name, _parent, _reg,	\
+				       _shift, _width, _flags)		\
+	struct ccu_phase _struct = {					\
+		.shift	= _shift,					\
+		.width	= _width,					\
+		.common	= {						\
+			.reg		= _reg,				\
+			.hw.init	= CLK_HW_INIT(_name,		\
+						      _parent,		\
+						      &ccu_phase_mmc_new_timing_ops, \
+						      _flags),		\
+		}							\
+	}
+
 static inline struct ccu_phase *hw_to_ccu_phase(struct clk_hw *hw)
 {
 	struct ccu_common *common = hw_to_ccu_common(hw);
@@ -47,4 +61,6 @@ static inline struct ccu_phase *hw_to_ccu_phase(struct clk_hw *hw)
 
 extern const struct clk_ops ccu_phase_ops;
 
+extern const struct clk_ops ccu_phase_mmc_new_timing_ops;
+
 #endif /* _CCU_PHASE_H_ */
-- 
2.11.0

[PATCH v2 4/8] clk: sunxi-ng: Support multiple variable pre-dividers

[Chen-Yu Tsai]

On the A83T, the AHB1 clock has a shared pre-divider on the two
PLL-PERIPH clock parents. To support such instances of shared
pre-dividers, this patch extends the mux clock type to support
multiple variable pre-dividers.

As the pre-dividers are only used to calculate the rate, but
do not participate in the factorization process, this is fairly
straightforward.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 10 +++++-----
 drivers/clk/sunxi-ng/ccu-sun6i-a31.c  | 10 +++++-----
 drivers/clk/sunxi-ng/ccu-sun8i-a23.c  | 10 +++++-----
 drivers/clk/sunxi-ng/ccu-sun8i-a33.c  | 10 +++++-----
 drivers/clk/sunxi-ng/ccu-sun8i-h3.c   | 10 +++++-----
 drivers/clk/sunxi-ng/ccu-sun8i-r.c    | 10 +++++-----
 drivers/clk/sunxi-ng/ccu-sun8i-v3s.c  | 10 +++++-----
 drivers/clk/sunxi-ng/ccu_mux.c        | 15 ++++++++-------
 drivers/clk/sunxi-ng/ccu_mux.h        | 13 ++++++++-----
 9 files changed, 51 insertions(+), 47 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
index f54114c607df..2bb4cabf802f 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -211,6 +211,9 @@ static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x050, 0, 2, 0);
 
 static const char * const ahb1_parents[] = { "osc32k", "osc24M",
 					     "axi", "pll-periph0" };
+static const struct ccu_mux_var_prediv ahb1_predivs[] = {
+	{ .index = 3, .shift = 6, .width = 2 },
+};
 static struct ccu_div ahb1_clk = {
 	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
 
@@ -218,11 +221,8 @@ static struct ccu_div ahb1_clk = {
 		.shift	= 12,
 		.width	= 2,
 
-		.variable_prediv	= {
-			.index	= 3,
-			.shift	= 6,
-			.width	= 2,
-		},
+		.var_predivs	= ahb1_predivs,
+		.n_var_predivs	= ARRAY_SIZE(ahb1_predivs),
 	},
 
 	.common		= {
diff --git a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
index 89e68d29bf45..bc9f2ca19233 100644
--- a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
+++ b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
@@ -195,6 +195,9 @@ static SUNXI_CCU_DIV_TABLE(axi_clk, "axi", "cpu",
 
 static const char * const ahb1_parents[] = { "osc32k", "osc24M",
 					     "axi", "pll-periph" };
+static const struct ccu_mux_var_prediv ahb1_predivs[] = {
+	{ .index = 3, .shift = 6, .width = 2 },
+};
 
 static struct ccu_div ahb1_clk = {
 	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
@@ -203,11 +206,8 @@ static struct ccu_div ahb1_clk = {
 		.shift	= 12,
 		.width	= 2,
 
-		.variable_prediv	= {
-			.index	= 3,
-			.shift	= 6,
-			.width	= 2,
-		},
+		.var_predivs	= ahb1_predivs,
+		.n_var_predivs	= ARRAY_SIZE(ahb1_predivs),
 	},
 
 	.common		= {
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a23.c b/drivers/clk/sunxi-ng/ccu-sun8i-a23.c
index 5c6d37bdf247..8a753ed0426d 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-a23.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-a23.c
@@ -169,6 +169,9 @@ static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x050, 0, 2, 0);
 
 static const char * const ahb1_parents[] = { "osc32k", "osc24M",
 					     "axi" , "pll-periph" };
+static const struct ccu_mux_var_prediv ahb1_predivs[] = {
+	{ .index = 3, .shift = 6, .width = 2 },
+};
 static struct ccu_div ahb1_clk = {
 	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
 
@@ -176,11 +179,8 @@ static struct ccu_div ahb1_clk = {
 		.shift	= 12,
 		.width	= 2,
 
-		.variable_prediv	= {
-			.index	= 3,
-			.shift	= 6,
-			.width	= 2,
-		},
+		.var_predivs	= ahb1_predivs,
+		.n_var_predivs	= ARRAY_SIZE(ahb1_predivs),
 	},
 
 	.common		= {
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a33.c b/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
index 8d38e6510e29..10b38dc46f75 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
@@ -180,6 +180,9 @@ static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x050, 0, 2, 0);
 
 static const char * const ahb1_parents[] = { "osc32k", "osc24M",
 					     "axi" , "pll-periph" };
+static const struct ccu_mux_var_prediv ahb1_predivs[] = {
+	{ .index = 3, .shift = 6, .width = 2 },
+};
 static struct ccu_div ahb1_clk = {
 	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
 
@@ -187,11 +190,8 @@ static struct ccu_div ahb1_clk = {
 		.shift	= 12,
 		.width	= 2,
 
-		.variable_prediv	= {
-			.index	= 3,
-			.shift	= 6,
-			.width	= 2,
-		},
+		.var_predivs	= ahb1_predivs,
+		.n_var_predivs	= ARRAY_SIZE(ahb1_predivs),
 	},
 
 	.common		= {
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
index 4cbc1b701b7c..62e4f0d2b2fc 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
@@ -141,6 +141,9 @@ static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x050, 0, 2, 0);
 
 static const char * const ahb1_parents[] = { "osc32k", "osc24M",
 					     "axi" , "pll-periph0" };
+static const struct ccu_mux_var_prediv ahb1_predivs[] = {
+	{ .index = 3, .shift = 6, .width = 2 },
+};
 static struct ccu_div ahb1_clk = {
 	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
 
@@ -148,11 +151,8 @@ static struct ccu_div ahb1_clk = {
 		.shift	= 12,
 		.width	= 2,
 
-		.variable_prediv	= {
-			.index	= 3,
-			.shift	= 6,
-			.width	= 2,
-		},
+		.var_predivs	= ahb1_predivs,
+		.n_var_predivs	= ARRAY_SIZE(ahb1_predivs),
 	},
 
 	.common		= {
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-r.c b/drivers/clk/sunxi-ng/ccu-sun8i-r.c
index 119f47b568ea..de02be75785c 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-r.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-r.c
@@ -27,6 +27,9 @@
 
 static const char * const ar100_parents[] = { "osc32k", "osc24M",
 					     "pll-periph0", "iosc" };
+static const struct ccu_mux_var_prediv ar100_predivs[] = {
+	{ .index = 2, .shift = 8, .width = 5 },
+};
 
 static struct ccu_div ar100_clk = {
 	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
@@ -35,11 +38,8 @@ static struct ccu_div ar100_clk = {
 		.shift	= 16,
 		.width	= 2,
 
-		.variable_prediv	= {
-			.index	= 2,
-			.shift	= 8,
-			.width	= 5,
-		},
+		.var_predivs	= ar100_predivs,
+		.n_var_predivs	= ARRAY_SIZE(ar100_predivs),
 	},
 
 	.common		= {
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
index e58706b40ae9..cb7299a94cba 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
@@ -132,6 +132,9 @@ static SUNXI_CCU_M(axi_clk, "axi", "cpu", 0x050, 0, 2, 0);
 
 static const char * const ahb1_parents[] = { "osc32k", "osc24M",
 					     "axi", "pll-periph0" };
+static const struct ccu_mux_var_prediv ahb1_predivs[] = {
+	{ .index = 3, .shift = 6, .width = 2 },
+};
 static struct ccu_div ahb1_clk = {
 	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
 
@@ -139,11 +142,8 @@ static struct ccu_div ahb1_clk = {
 		.shift	= 12,
 		.width	= 2,
 
-		.variable_prediv	= {
-			.index	= 3,
-			.shift	= 6,
-			.width	= 2,
-		},
+		.var_predivs	= ahb1_predivs,
+		.n_var_predivs	= ARRAY_SIZE(ahb1_predivs),
 	},
 
 	.common		= {
diff --git a/drivers/clk/sunxi-ng/ccu_mux.c b/drivers/clk/sunxi-ng/ccu_mux.c
index c6bb1f523232..b1eaafac9f23 100644
--- a/drivers/clk/sunxi-ng/ccu_mux.c
+++ b/drivers/clk/sunxi-ng/ccu_mux.c
@@ -46,13 +46,14 @@ void ccu_mux_helper_adjust_parent_for_prediv(struct ccu_common *common,
 				prediv = cm->fixed_predivs[i].div;
 
 	if (common->features & CCU_FEATURE_VARIABLE_PREDIV)
-		if (parent_index == cm->variable_prediv.index) {
-			u8 div;
-
-			div = reg >> cm->variable_prediv.shift;
-			div &= (1 << cm->variable_prediv.width) - 1;
-			prediv = div + 1;
-		}
+		for (i = 0; i < cm->n_var_predivs; i++)
+			if (parent_index == cm->var_predivs[i].index) {
+				u8 div;
+
+				div = reg >> cm->var_predivs[i].shift;
+				div &= (1 << cm->var_predivs[i].width) - 1;
+				prediv = div + 1;
+			}
 
 	*parent_rate = *parent_rate / prediv;
 }
diff --git a/drivers/clk/sunxi-ng/ccu_mux.h b/drivers/clk/sunxi-ng/ccu_mux.h
index 47aba3a48245..044262245c07 100644
--- a/drivers/clk/sunxi-ng/ccu_mux.h
+++ b/drivers/clk/sunxi-ng/ccu_mux.h
@@ -10,6 +10,12 @@ struct ccu_mux_fixed_prediv {
 	u16	div;
 };
 
+struct ccu_mux_var_prediv {
+	u8	index;
+	u8	shift;
+	u8	width;
+};
+
 struct ccu_mux_internal {
 	u8		shift;
 	u8		width;
@@ -18,11 +24,8 @@ struct ccu_mux_internal {
 	const struct ccu_mux_fixed_prediv	*fixed_predivs;
 	u8		n_predivs;
 
-	struct {
-		u8	index;
-		u8	shift;
-		u8	width;
-	} variable_prediv;
+	const struct ccu_mux_var_prediv		*var_predivs;
+	u8		n_var_predivs;
 };
 
 #define _SUNXI_CCU_MUX_TABLE(_shift, _width, _table)	\
-- 
2.11.0

[PATCH v2 5/8] clk: sunxi-ng: Add driver for A83T CCU

[Chen-Yu Tsai]

The A83T clock control unit is a hybrid of some new style clock designs
from the A80, and old style layout from the other Allwinner SoCs.

Like the A80, the SoC does not have a low speed 32.768 kHz oscillator.
Unlike the A80, there is no clock input either. The only low speed clock
available is the internal oscillator which runs at around 16 MHz,
divided by 512, yielding a low speed clock around 31.250 kHz.

Also, the MMC2 module clock supports switching to a "new timing" mode.
This mode divides the clock output by half, and disables the CCU based
clock delays. The MMC controller must be configure to the same mode,
and then use its internal clock delays.

This driver does not support runtime switching of the timing modes.
Instead, the new timing mode is enforced at probe time. Consumers can
check which mode is active by trying to get the current phase delay
of the MMC2 phase clocks, which will return -ENOTSUPP if the new
timing mode is active.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/clk/sunxi-ng/Kconfig               |  10 +
 drivers/clk/sunxi-ng/Makefile              |   1 +
 drivers/clk/sunxi-ng/ccu-sun8i-a83t.c      | 911 +++++++++++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-sun8i-a83t.h      |  64 ++
 include/dt-bindings/clock/sun8i-a83t-ccu.h | 140 +++++
 include/dt-bindings/reset/sun8i-a83t-ccu.h |  98 ++++
 6 files changed, 1224 insertions(+)
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-a83t.h
 create mode 100644 include/dt-bindings/clock/sun8i-a83t-ccu.h
 create mode 100644 include/dt-bindings/reset/sun8i-a83t-ccu.h

diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index 64088e599404..8bee22563909 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -116,6 +116,16 @@ config SUN8I_A33_CCU
 	default MACH_SUN8I
 	depends on MACH_SUN8I || COMPILE_TEST
 
+config SUN8I_A83T_CCU
+	bool "Support for the Allwinner A83T CCU"
+	select SUNXI_CCU_DIV
+	select SUNXI_CCU_GATE
+	select SUNXI_CCU_NKMP
+	select SUNXI_CCU_NM
+	select SUNXI_CCU_MP
+	select SUNXI_CCU_PHASE
+	default MACH_SUN8I
+
 config SUN8I_H3_CCU
 	bool "Support for the Allwinner H3 CCU"
 	select SUNXI_CCU_DIV
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 0ec02fe14c50..78028c8f5fa9 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_SUN5I_CCU)		+= ccu-sun5i.o
 obj-$(CONFIG_SUN6I_A31_CCU)	+= ccu-sun6i-a31.o
 obj-$(CONFIG_SUN8I_A23_CCU)	+= ccu-sun8i-a23.o
 obj-$(CONFIG_SUN8I_A33_CCU)	+= ccu-sun8i-a33.o
+obj-$(CONFIG_SUN8I_A83T_CCU)	+= ccu-sun8i-a83t.o
 obj-$(CONFIG_SUN8I_H3_CCU)	+= ccu-sun8i-h3.o
 obj-$(CONFIG_SUN8I_V3S_CCU)	+= ccu-sun8i-v3s.o
 obj-$(CONFIG_SUN8I_R_CCU)	+= ccu-sun8i-r.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c b/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
new file mode 100644
index 000000000000..e32ef2cac568
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
@@ -0,0 +1,911 @@
+/*
+ * Copyright (c) 2017 Chen-Yu Tsai. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+#include "ccu_phase.h"
+
+#include "ccu-sun8i-a83t.h"
+
+#define CCU_SUN8I_A83T_LOCK_REG	0x208
+
+static struct clk_div_table pll_cpux_p_div_table[] = {
+	{ .val = 0, .div = 1 },
+	{ .val = 1, .div = 4 },
+	{ /* Sentinel */ },
+};
+
+/*
+ * The CPU PLLs are actually NP clocks, but P is /1 or /4, so here we
+ * use the NM clocks with a divider table for M.
+ */
+static struct ccu_nm pll_c0cpux_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(0),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
+	.m		= _SUNXI_CCU_DIV_TABLE(16, 1, pll_cpux_p_div_table),
+	.common		= {
+		.reg		= 0x000,
+		.lock_reg	= CCU_SUN8I_A83T_LOCK_REG,
+		.features	= CCU_FEATURE_LOCK_REG,
+		.hw.init	= CLK_HW_INIT("pll-c0cpux", "osc24M",
+					      &ccu_nm_ops, CLK_SET_RATE_UNGATE),
+	},
+};
+
+static struct ccu_nm pll_c1cpux_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(1),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
+	.m		= _SUNXI_CCU_DIV_TABLE(16, 1, pll_cpux_p_div_table),
+	.common		= {
+		.reg		= 0x004,
+		.lock_reg	= CCU_SUN8I_A83T_LOCK_REG,
+		.features	= CCU_FEATURE_LOCK_REG,
+		.hw.init	= CLK_HW_INIT("pll-c1cpux", "osc24M",
+					      &ccu_nm_ops, CLK_SET_RATE_UNGATE),
+	},
+};
+
+/*
+ * The Audio PLL has d1, d2 dividers in addition to the usual N, M
+ * factors. Since we only need 2 frequencies from this PLL: 22.5792 MHz
+ * and 24.576 MHz, ignore them for now. Enforce the default for them,
+ * which is d1 = 0, d2 = 1.
+ */
+#define SUN8I_A83T_PLL_AUDIO_REG	0x008
+
+static struct ccu_nm pll_audio_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(2),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
+	.m		= _SUNXI_CCU_DIV_OFFSET(0, 6, 0),
+	.common		= {
+		.reg		= SUN8I_A83T_PLL_AUDIO_REG,
+		.lock_reg	= CCU_SUN8I_A83T_LOCK_REG,
+		.features	= CCU_FEATURE_LOCK_REG,
+		.hw.init	= CLK_HW_INIT("pll-audio", "osc24M",
+					      &ccu_nm_ops, CLK_SET_RATE_UNGATE),
+	},
+};
+
+/* Some PLLs are input * N / div1 / P. Model them as NKMP with no K */
+static struct ccu_nkmp pll_video0_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(3),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
+	.m		= _SUNXI_CCU_DIV(16, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 2), /* output divider */
+	.common		= {
+		.reg		= 0x010,
+		.lock_reg	= CCU_SUN8I_A83T_LOCK_REG,
+		.features	= CCU_FEATURE_LOCK_REG,
+		.hw.init	= CLK_HW_INIT("pll-video0", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+static struct ccu_nkmp pll_ve_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(4),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
+	.m		= _SUNXI_CCU_DIV(16, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(18, 1), /* output divider */
+	.common		= {
+		.reg		= 0x018,
+		.lock_reg	= CCU_SUN8I_A83T_LOCK_REG,
+		.features	= CCU_FEATURE_LOCK_REG,
+		.hw.init	= CLK_HW_INIT("pll-ve", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+static struct ccu_nkmp pll_ddr_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(5),
+	.n		= _SUNXI_CCU_MULT_MIN(8, 8, 12),
+	.m		= _SUNXI_CCU_DIV(16, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(18, 1), /* output divider */
+	.common		= {
+		.reg		= 0x020,
+		.lock_reg	= CCU_SUN8I_A83T_LOCK_REG,
+		.features	= CCU_FEATURE_LOCK_REG,
+		.hw.init	= CLK_HW_INIT("pll-ddr", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+static struct ccu_nkmp pll_periph_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(6),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
+	.m		= _SUNXI_CCU_DIV(16, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(18, 1), /* output divider */
+	.common		= {
+		.reg		= 0x028,
+		.lock_reg	= CCU_SUN8I_A83T_LOCK_REG,
+		.features	= CCU_FEATURE_LOCK_REG,
+		.hw.init	= CLK_HW_INIT("pll-periph", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+static struct ccu_nkmp pll_gpu_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(7),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
+	.m		= _SUNXI_CCU_DIV(16, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(18, 1), /* output divider */
+	.common		= {
+		.reg		= 0x038,
+		.lock_reg	= CCU_SUN8I_A83T_LOCK_REG,
+		.features	= CCU_FEATURE_LOCK_REG,
+		.hw.init	= CLK_HW_INIT("pll-gpu", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+static struct ccu_nkmp pll_hsic_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(8),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
+	.m		= _SUNXI_CCU_DIV(16, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(18, 1), /* output divider */
+	.common		= {
+		.reg		= 0x044,
+		.lock_reg	= CCU_SUN8I_A83T_LOCK_REG,
+		.features	= CCU_FEATURE_LOCK_REG,
+		.hw.init	= CLK_HW_INIT("pll-hsic", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+static struct ccu_nkmp pll_de_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(9),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
+	.m		= _SUNXI_CCU_DIV(16, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(18, 1), /* output divider */
+	.common		= {
+		.reg		= 0x048,
+		.lock_reg	= CCU_SUN8I_A83T_LOCK_REG,
+		.features	= CCU_FEATURE_LOCK_REG,
+		.hw.init	= CLK_HW_INIT("pll-de", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+static struct ccu_nkmp pll_video1_clk = {
+	.enable		= BIT(31),
+	.lock		= BIT(10),
+	.n		= _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0),
+	.m		= _SUNXI_CCU_DIV(16, 1), /* input divider */
+	.p		= _SUNXI_CCU_DIV(0, 2), /* external divider p */
+	.common		= {
+		.reg		= 0x04c,
+		.lock_reg	= CCU_SUN8I_A83T_LOCK_REG,
+		.features	= CCU_FEATURE_LOCK_REG,
+		.hw.init	= CLK_HW_INIT("pll-video1", "osc24M",
+					      &ccu_nkmp_ops,
+					      CLK_SET_RATE_UNGATE),
+	},
+};
+
+static const char * const c0cpux_parents[] = { "osc24M", "pll-c0cpux" };
+static SUNXI_CCU_MUX(c0cpux_clk, "c0cpux", c0cpux_parents,
+		     0x50, 12, 1, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+
+static const char * const c1cpux_parents[] = { "osc24M", "pll-c1cpux" };
+static SUNXI_CCU_MUX(c1cpux_clk, "c1cpux", c1cpux_parents,
+		     0x50, 28, 1, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+
+static SUNXI_CCU_M(axi0_clk, "axi0", "c0cpux", 0x050, 0, 2, 0);
+static SUNXI_CCU_M(axi1_clk, "axi1", "c1cpux", 0x050, 16, 2, 0);
+
+static const char * const ahb1_parents[] = { "osc16M-d512", "osc24M",
+					     "pll-periph",
+					     "pll-periph" };
+static const struct ccu_mux_var_prediv ahb1_predivs[] = {
+	{ .index = 2, .shift = 6, .width = 2 },
+	{ .index = 3, .shift = 6, .width = 2 },
+};
+static struct ccu_div ahb1_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(4, 2, CLK_DIVIDER_POWER_OF_TWO),
+	.mux		= {
+		.shift	= 12,
+		.width	= 2,
+
+		.var_predivs	= ahb1_predivs,
+		.n_var_predivs	= ARRAY_SIZE(ahb1_predivs),
+	},
+	.common		= {
+		.reg		= 0x054,
+		.hw.init	= CLK_HW_INIT_PARENTS("ahb1",
+						      ahb1_parents,
+						      &ccu_div_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_M(apb1_clk, "apb1", "ahb1", 0x054, 8, 2, 0);
+
+static const char * const apb2_parents[] = { "osc16M-d512", "osc24M",
+					     "pll-periph", "pll-periph" };
+
+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", apb2_parents, 0x058,
+			     0, 5,	/* M */
+			     16, 2,	/* P */
+			     24, 2,	/* mux */
+			     0);
+
+static const char * const ahb2_parents[] = { "ahb1", "pll-periph" };
+static const struct ccu_mux_fixed_prediv ahb2_prediv = {
+	.index = 1, .div = 2
+};
+static struct ccu_mux ahb2_clk = {
+	.mux		= {
+		.shift		= 0,
+		.width		= 2,
+		.fixed_predivs	= &ahb2_prediv,
+		.n_predivs	= 1,
+	},
+	.common		= {
+		.reg		= 0x05c,
+		.hw.init	= CLK_HW_INIT_PARENTS("ahb2",
+						      ahb2_parents,
+						      &ccu_mux_ops,
+						      0),
+	},
+};
+
+static SUNXI_CCU_GATE(bus_mipi_dsi_clk,	"bus-mipi-dsi",	"ahb1",
+		      0x060, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_ss_clk,	"bus-ss",	"ahb1",
+		      0x060, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_dma_clk,	"bus-dma",	"ahb1",
+		      0x060, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_mmc0_clk,	"bus-mmc0",	"ahb1",
+		      0x060, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk,	"bus-mmc1",	"ahb1",
+		      0x060, BIT(9), 0);
+static SUNXI_CCU_GATE(bus_mmc2_clk,	"bus-mmc2",	"ahb1",
+		      0x060, BIT(10), 0);
+static SUNXI_CCU_GATE(bus_nand_clk,	"bus-nand",	"ahb1",
+		      0x060, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_dram_clk,	"bus-dram",	"ahb1",
+		      0x060, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_emac_clk,	"bus-emac",	"ahb2",
+		      0x060, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_hstimer_clk,	"bus-hstimer",	"ahb1",
+		      0x060, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_spi0_clk,	"bus-spi0",	"ahb1",
+		      0x060, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_spi1_clk,	"bus-spi1",	"ahb1",
+		      0x060, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_otg_clk,	"bus-otg",	"ahb1",
+		      0x060, BIT(24), 0);
+static SUNXI_CCU_GATE(bus_ehci0_clk,	"bus-ehci0",	"ahb2",
+		      0x060, BIT(26), 0);
+static SUNXI_CCU_GATE(bus_ehci1_clk,	"bus-ehci1",	"ahb2",
+		      0x060, BIT(27), 0);
+static SUNXI_CCU_GATE(bus_ohci0_clk,	"bus-ohci0",	"ahb2",
+		      0x060, BIT(29), 0);
+
+static SUNXI_CCU_GATE(bus_ve_clk,	"bus-ve",	"ahb1",
+		      0x064, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_tcon0_clk,	"bus-tcon0",	"ahb1",
+		      0x064, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_tcon1_clk,	"bus-tcon1",	"ahb1",
+		      0x064, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_csi_clk,	"bus-csi",	"ahb1",
+		      0x064, BIT(8), 0);
+static SUNXI_CCU_GATE(bus_hdmi_clk,	"bus-hdmi",	"ahb1",
+		      0x064, BIT(11), 0);
+static SUNXI_CCU_GATE(bus_de_clk,	"bus-de",	"ahb1",
+		      0x064, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_gpu_clk,	"bus-gpu",	"ahb1",
+		      0x064, BIT(20), 0);
+static SUNXI_CCU_GATE(bus_msgbox_clk,	"bus-msgbox",	"ahb1",
+		      0x064, BIT(21), 0);
+static SUNXI_CCU_GATE(bus_spinlock_clk,	"bus-spinlock",	"ahb1",
+		      0x064, BIT(22), 0);
+
+static SUNXI_CCU_GATE(bus_spdif_clk,	"bus-spdif",	"apb1",
+		      0x068, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_pio_clk,	"bus-pio",	"apb1",
+		      0x068, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_i2s0_clk,	"bus-i2s0",	"apb1",
+		      0x068, BIT(12), 0);
+static SUNXI_CCU_GATE(bus_i2s1_clk,	"bus-i2s1",	"apb1",
+		      0x068, BIT(13), 0);
+static SUNXI_CCU_GATE(bus_i2s2_clk,	"bus-i2s2",	"apb1",
+		      0x068, BIT(14), 0);
+static SUNXI_CCU_GATE(bus_tdm_clk,	"bus-tdm",	"apb1",
+		      0x068, BIT(15), 0);
+
+static SUNXI_CCU_GATE(bus_i2c0_clk,	"bus-i2c0",	"apb2",
+		      0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk,	"bus-i2c1",	"apb2",
+		      0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c2_clk,	"bus-i2c2",	"apb2",
+		      0x06c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_uart0_clk,	"bus-uart0",	"apb2",
+		      0x06c, BIT(16), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk,	"bus-uart1",	"apb2",
+		      0x06c, BIT(17), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk,	"bus-uart2",	"apb2",
+		      0x06c, BIT(18), 0);
+static SUNXI_CCU_GATE(bus_uart3_clk,	"bus-uart3",	"apb2",
+		      0x06c, BIT(19), 0);
+static SUNXI_CCU_GATE(bus_uart4_clk,	"bus-uart4",	"apb2",
+		      0x06c, BIT(20), 0);
+
+static const char * const cci400_parents[] = { "osc24M", "pll-periph",
+					       "pll-hsic" };
+static struct ccu_div cci400_clk = {
+	.div		= _SUNXI_CCU_DIV_FLAGS(0, 2, 0),
+	.mux		= _SUNXI_CCU_MUX(24, 2),
+	.common		= {
+		.reg		= 0x078,
+		.hw.init	= CLK_HW_INIT_PARENTS("cci400",
+						      cci400_parents,
+						      &ccu_div_ops,
+						      CLK_IS_CRITICAL),
+	},
+};
+
+static const char * const mod0_default_parents[] = { "osc24M", "pll-periph" };
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand_clk, "nand", mod0_default_parents,
+				  0x080,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc0_clk, "mmc0", mod0_default_parents,
+				  0x088,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc0_sample_clk, "mmc0-sample", "mmc0",
+		       0x088, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc0_output_clk, "mmc0-output", "mmc0",
+		       0x088, 8, 3, 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(mmc1_clk, "mmc1", mod0_default_parents,
+				  0x08c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_PHASE(mmc1_sample_clk, "mmc1-sample", "mmc1",
+		       0x08c, 20, 3, 0);
+static SUNXI_CCU_PHASE(mmc1_output_clk, "mmc1-output", "mmc1",
+		       0x08c, 8, 3, 0);
+
+/*
+ * MMC2 supports both old and new timing modes. Here we force the
+ * hardware to use the new timing mode at probe time.
+ */
+#define SUN8I_A83T_MMC2_REG	0x090
+static const struct ccu_mux_var_prediv mmc2_new_timing_predivs[] = {
+	{ .index = 0, .shift = 30, .width = 1 },
+	{ .index = 1, .shift = 30, .width = 1 },
+};
+static struct ccu_mp mmc2_clk = {
+	.enable	= BIT(31),
+	.m	= _SUNXI_CCU_DIV(0, 4),
+	.p	= _SUNXI_CCU_DIV(16, 2),
+	.mux	= {
+		.shift	= 24,
+		.width	= 2,
+		.var_predivs	= mmc2_new_timing_predivs,
+		.n_var_predivs	= ARRAY_SIZE(mmc2_new_timing_predivs),
+	},
+	.common		= {
+		.reg		= 0x090,
+		.hw.init	= CLK_HW_INIT_PARENTS("mmc2",
+						      mod0_default_parents,
+						      &ccu_mp_ops,
+						      CLK_GET_RATE_NOCACHE),
+	},
+};
+
+static SUNXI_CCU_PHASE_MMC_NEW_TIMING(mmc2_sample_clk, "mmc2-sample", "mmc2",
+				      0x090, 20, 3, CLK_GET_PHASE_NOCACHE);
+static SUNXI_CCU_PHASE_MMC_NEW_TIMING(mmc2_output_clk, "mmc2-output", "mmc2",
+				      0x090, 8, 3, CLK_GET_PHASE_NOCACHE);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(ss_clk, "ss", mod0_default_parents,
+				  0x09c,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 2,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", mod0_default_parents,
+				  0x0a0,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 4,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", mod0_default_parents,
+				  0x0a4,
+				  0, 4,		/* M */
+				  16, 2,	/* P */
+				  24, 4,	/* mux */
+				  BIT(31),	/* gate */
+				  0);
+
+static SUNXI_CCU_M_WITH_GATE(i2s0_clk, "i2s0", "pll-audio",
+			     0x0b0, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M_WITH_GATE(i2s1_clk, "i2s1", "pll-audio",
+			     0x0b4, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M_WITH_GATE(i2s2_clk, "i2s2", "pll-audio",
+			     0x0b8, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M_WITH_GATE(tdm_clk, "tdm", "pll-audio",
+			     0x0bc, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M_WITH_GATE(spdif_clk, "spdif", "pll-audio",
+			     0x0c0, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(usb_phy0_clk,	"usb-phy0",	"osc24M",
+		      0x0cc, BIT(8), 0);
+static SUNXI_CCU_GATE(usb_phy1_clk,	"usb-phy1",	"osc24M",
+		      0x0cc, BIT(9), 0);
+static SUNXI_CCU_GATE(usb_hsic_clk,	"usb-hsic",	"pll-hsic",
+		      0x0cc, BIT(10), 0);
+static struct ccu_gate usb_hsic_12m_clk = {
+	.enable	= BIT(11),
+	.common	= {
+		.reg		= 0x0cc,
+		.prediv		= 2,
+		.features	= CCU_FEATURE_ALL_PREDIV,
+		.hw.init	= CLK_HW_INIT("usb-hsic-12m", "osc24M",
+					      &ccu_gate_ops, 0),
+	}
+};
+static SUNXI_CCU_GATE(usb_ohci0_clk,	"usb-ohci0",	"osc24M",
+		      0x0cc, BIT(16), 0);
+
+/* TODO divider has minimum of 2 */
+static SUNXI_CCU_M(dram_clk, "dram", "pll-ddr", 0x0f4, 0, 4, CLK_IS_CRITICAL);
+
+static SUNXI_CCU_GATE(dram_ve_clk,	"dram-ve",	"dram",
+		      0x100, BIT(0), 0);
+static SUNXI_CCU_GATE(dram_csi_clk,	"dram-csi",	"dram",
+		      0x100, BIT(1), 0);
+
+static const char * const tcon0_parents[] = { "pll-video0" };
+static SUNXI_CCU_MUX_WITH_GATE(tcon0_clk, "tcon0", tcon0_parents,
+				 0x118, 24, 3, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char * const tcon1_parents[] = { "pll-video1" };
+static SUNXI_CCU_MUX_WITH_GATE(tcon1_clk, "tcon1", tcon1_parents,
+				 0x11c, 24, 3, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(csi_misc_clk, "csi-misc", "osc24M", 0x130, BIT(16), 0);
+
+static SUNXI_CCU_GATE(mipi_csi_clk, "mipi-csi", "osc24M", 0x130, BIT(31), 0);
+
+static const char * const csi_mclk_parents[] = { "pll-de", "osc24M" };
+static const u8 csi_mclk_table[] = { 3, 5 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi_mclk_clk, "csi-mclk",
+				       csi_mclk_parents, csi_mclk_table,
+				       0x134,
+				       0, 5,	/* M */
+				       10, 3,	/* mux */
+				       BIT(15),	/* gate */
+				       0);
+
+static const char * const csi_sclk_parents[] = { "pll-periph", "pll-ve" };
+static const u8 csi_sclk_table[] = { 0, 5 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(csi_sclk_clk, "csi-sclk",
+				       csi_sclk_parents, csi_sclk_table,
+				       0x134,
+				       16, 4,	/* M */
+				       24, 3,	/* mux */
+				       BIT(31),	/* gate */
+				       0);
+
+static SUNXI_CCU_M_WITH_GATE(ve_clk, "ve", "pll-ve", 0x13c,
+			     16, 3, BIT(31), CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M", 0x144, BIT(31), 0);
+
+static const char * const hdmi_parents[] = { "pll-video1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
+				 0x150,
+				 0, 4,	/* M */
+				 24, 2,	/* mux */
+				 BIT(31),	/* gate */
+				 CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(hdmi_slow_clk, "hdmi-slow", "osc24M", 0x154, BIT(31), 0);
+
+static const char * const mbus_parents[] = { "osc24M", "pll-periph",
+					     "pll-ddr" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
+				 0x15c,
+				 0, 3,	/* M */
+				 24, 2,	/* mux */
+				 BIT(31),	/* gate */
+				 CLK_IS_CRITICAL);
+
+static const char * const mipi_dsi0_parents[] = { "pll-video0" };
+static const u8 mipi_dsi0_table[] = { 8 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(mipi_dsi0_clk, "mipi-dsi0",
+				       mipi_dsi0_parents, mipi_dsi0_table,
+				       0x168,
+				       0, 4,	/* M */
+				       24, 4,	/* mux */
+				       BIT(31),	/* gate */
+				       CLK_SET_RATE_PARENT);
+
+static const char * const mipi_dsi1_parents[] = { "osc24M", "pll-video0" };
+static const u8 mipi_dsi1_table[] = { 0, 9 };
+static SUNXI_CCU_M_WITH_MUX_TABLE_GATE(mipi_dsi1_clk, "mipi-dsi1",
+				       mipi_dsi1_parents, mipi_dsi1_table,
+				       0x16c,
+				       0, 4,	/* M */
+				       24, 4,	/* mux */
+				       BIT(31),	/* gate */
+				       CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_GATE(gpu_core_clk, "gpu-core", "pll-gpu", 0x1a0,
+			     0, 3, BIT(31), CLK_SET_RATE_PARENT);
+
+static const char * const gpu_memory_parents[] = { "pll-gpu", "pll-ddr" };
+static SUNXI_CCU_M_WITH_MUX_GATE(gpu_memory_clk, "gpu-memory",
+				 gpu_memory_parents,
+				 0x1a4,
+				 0, 3,		/* M */
+				 24, 1,		/* mux */
+				 BIT(31),	/* gate */
+				 CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_M_WITH_GATE(gpu_hyd_clk, "gpu-hyd", "pll-gpu", 0x1a8,
+			     0, 3, BIT(31), CLK_SET_RATE_PARENT);
+
+static struct ccu_common *sun8i_a83t_ccu_clks[] = {
+	&pll_c0cpux_clk.common,
+	&pll_c1cpux_clk.common,
+	&pll_audio_clk.common,
+	&pll_video0_clk.common,
+	&pll_ve_clk.common,
+	&pll_ddr_clk.common,
+	&pll_periph_clk.common,
+	&pll_gpu_clk.common,
+	&pll_hsic_clk.common,
+	&pll_de_clk.common,
+	&pll_video1_clk.common,
+	&c0cpux_clk.common,
+	&c1cpux_clk.common,
+	&axi0_clk.common,
+	&axi1_clk.common,
+	&ahb1_clk.common,
+	&ahb2_clk.common,
+	&apb1_clk.common,
+	&apb2_clk.common,
+	&bus_mipi_dsi_clk.common,
+	&bus_ss_clk.common,
+	&bus_dma_clk.common,
+	&bus_mmc0_clk.common,
+	&bus_mmc1_clk.common,
+	&bus_mmc2_clk.common,
+	&bus_nand_clk.common,
+	&bus_dram_clk.common,
+	&bus_emac_clk.common,
+	&bus_hstimer_clk.common,
+	&bus_spi0_clk.common,
+	&bus_spi1_clk.common,
+	&bus_otg_clk.common,
+	&bus_ehci0_clk.common,
+	&bus_ehci1_clk.common,
+	&bus_ohci0_clk.common,
+	&bus_ve_clk.common,
+	&bus_tcon0_clk.common,
+	&bus_tcon1_clk.common,
+	&bus_csi_clk.common,
+	&bus_hdmi_clk.common,
+	&bus_de_clk.common,
+	&bus_gpu_clk.common,
+	&bus_msgbox_clk.common,
+	&bus_spinlock_clk.common,
+	&bus_spdif_clk.common,
+	&bus_pio_clk.common,
+	&bus_i2s0_clk.common,
+	&bus_i2s1_clk.common,
+	&bus_i2s2_clk.common,
+	&bus_tdm_clk.common,
+	&bus_i2c0_clk.common,
+	&bus_i2c1_clk.common,
+	&bus_i2c2_clk.common,
+	&bus_uart0_clk.common,
+	&bus_uart1_clk.common,
+	&bus_uart2_clk.common,
+	&bus_uart3_clk.common,
+	&bus_uart4_clk.common,
+	&cci400_clk.common,
+	&nand_clk.common,
+	&mmc0_clk.common,
+	&mmc0_sample_clk.common,
+	&mmc0_output_clk.common,
+	&mmc1_clk.common,
+	&mmc1_sample_clk.common,
+	&mmc1_output_clk.common,
+	&mmc2_clk.common,
+	&mmc2_sample_clk.common,
+	&mmc2_output_clk.common,
+	&ss_clk.common,
+	&spi0_clk.common,
+	&spi1_clk.common,
+	&i2s0_clk.common,
+	&i2s1_clk.common,
+	&i2s2_clk.common,
+	&tdm_clk.common,
+	&spdif_clk.common,
+	&usb_phy0_clk.common,
+	&usb_phy1_clk.common,
+	&usb_hsic_clk.common,
+	&usb_hsic_12m_clk.common,
+	&usb_ohci0_clk.common,
+	&dram_clk.common,
+	&dram_ve_clk.common,
+	&dram_csi_clk.common,
+	&tcon0_clk.common,
+	&tcon1_clk.common,
+	&csi_misc_clk.common,
+	&mipi_csi_clk.common,
+	&csi_mclk_clk.common,
+	&csi_sclk_clk.common,
+	&ve_clk.common,
+	&avs_clk.common,
+	&hdmi_clk.common,
+	&hdmi_slow_clk.common,
+	&mbus_clk.common,
+	&mipi_dsi0_clk.common,
+	&mipi_dsi1_clk.common,
+	&gpu_core_clk.common,
+	&gpu_memory_clk.common,
+	&gpu_hyd_clk.common,
+};
+
+static struct clk_hw_onecell_data sun8i_a83t_hw_clks = {
+	.hws	= {
+		[CLK_PLL_C0CPUX]	= &pll_c0cpux_clk.common.hw,
+		[CLK_PLL_C1CPUX]	= &pll_c1cpux_clk.common.hw,
+		[CLK_PLL_AUDIO]		= &pll_audio_clk.common.hw,
+		[CLK_PLL_VIDEO0]	= &pll_video0_clk.common.hw,
+		[CLK_PLL_VE]		= &pll_ve_clk.common.hw,
+		[CLK_PLL_DDR]		= &pll_ddr_clk.common.hw,
+		[CLK_PLL_PERIPH]	= &pll_periph_clk.common.hw,
+		[CLK_PLL_GPU]		= &pll_gpu_clk.common.hw,
+		[CLK_PLL_HSIC]		= &pll_hsic_clk.common.hw,
+		[CLK_PLL_DE]		= &pll_de_clk.common.hw,
+		[CLK_PLL_VIDEO1]	= &pll_video1_clk.common.hw,
+		[CLK_C0CPUX]		= &c0cpux_clk.common.hw,
+		[CLK_C1CPUX]		= &c1cpux_clk.common.hw,
+		[CLK_AXI0]		= &axi0_clk.common.hw,
+		[CLK_AXI1]		= &axi1_clk.common.hw,
+		[CLK_AHB1]		= &ahb1_clk.common.hw,
+		[CLK_AHB2]		= &ahb2_clk.common.hw,
+		[CLK_APB1]		= &apb1_clk.common.hw,
+		[CLK_APB2]		= &apb2_clk.common.hw,
+		[CLK_BUS_MIPI_DSI]	= &bus_mipi_dsi_clk.common.hw,
+		[CLK_BUS_SS]		= &bus_ss_clk.common.hw,
+		[CLK_BUS_DMA]		= &bus_dma_clk.common.hw,
+		[CLK_BUS_MMC0]		= &bus_mmc0_clk.common.hw,
+		[CLK_BUS_MMC1]		= &bus_mmc1_clk.common.hw,
+		[CLK_BUS_MMC2]		= &bus_mmc2_clk.common.hw,
+		[CLK_BUS_NAND]		= &bus_nand_clk.common.hw,
+		[CLK_BUS_DRAM]		= &bus_dram_clk.common.hw,
+		[CLK_BUS_EMAC]		= &bus_emac_clk.common.hw,
+		[CLK_BUS_HSTIMER]	= &bus_hstimer_clk.common.hw,
+		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
+		[CLK_BUS_SPI1]		= &bus_spi1_clk.common.hw,
+		[CLK_BUS_OTG]		= &bus_otg_clk.common.hw,
+		[CLK_BUS_EHCI0]		= &bus_ehci0_clk.common.hw,
+		[CLK_BUS_EHCI1]		= &bus_ehci1_clk.common.hw,
+		[CLK_BUS_OHCI0]		= &bus_ohci0_clk.common.hw,
+		[CLK_BUS_VE]		= &bus_ve_clk.common.hw,
+		[CLK_BUS_TCON0]		= &bus_tcon0_clk.common.hw,
+		[CLK_BUS_TCON1]		= &bus_tcon1_clk.common.hw,
+		[CLK_BUS_CSI]		= &bus_csi_clk.common.hw,
+		[CLK_BUS_HDMI]		= &bus_hdmi_clk.common.hw,
+		[CLK_BUS_DE]		= &bus_de_clk.common.hw,
+		[CLK_BUS_GPU]		= &bus_gpu_clk.common.hw,
+		[CLK_BUS_MSGBOX]	= &bus_msgbox_clk.common.hw,
+		[CLK_BUS_SPINLOCK]	= &bus_spinlock_clk.common.hw,
+		[CLK_BUS_SPDIF]		= &bus_spdif_clk.common.hw,
+		[CLK_BUS_PIO]		= &bus_pio_clk.common.hw,
+		[CLK_BUS_I2S0]		= &bus_i2s0_clk.common.hw,
+		[CLK_BUS_I2S1]		= &bus_i2s1_clk.common.hw,
+		[CLK_BUS_I2S2]		= &bus_i2s2_clk.common.hw,
+		[CLK_BUS_TDM]		= &bus_tdm_clk.common.hw,
+		[CLK_BUS_I2C0]		= &bus_i2c0_clk.common.hw,
+		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
+		[CLK_BUS_I2C2]		= &bus_i2c2_clk.common.hw,
+		[CLK_BUS_UART0]		= &bus_uart0_clk.common.hw,
+		[CLK_BUS_UART1]		= &bus_uart1_clk.common.hw,
+		[CLK_BUS_UART2]		= &bus_uart2_clk.common.hw,
+		[CLK_BUS_UART3]		= &bus_uart3_clk.common.hw,
+		[CLK_BUS_UART4]		= &bus_uart4_clk.common.hw,
+		[CLK_CCI400]		= &cci400_clk.common.hw,
+		[CLK_NAND]		= &nand_clk.common.hw,
+		[CLK_MMC0]		= &mmc0_clk.common.hw,
+		[CLK_MMC0_SAMPLE]	= &mmc0_sample_clk.common.hw,
+		[CLK_MMC0_OUTPUT]	= &mmc0_output_clk.common.hw,
+		[CLK_MMC1]		= &mmc1_clk.common.hw,
+		[CLK_MMC1_SAMPLE]	= &mmc1_sample_clk.common.hw,
+		[CLK_MMC1_OUTPUT]	= &mmc1_output_clk.common.hw,
+		[CLK_MMC2]		= &mmc2_clk.common.hw,
+		[CLK_MMC2_SAMPLE]	= &mmc2_sample_clk.common.hw,
+		[CLK_MMC2_OUTPUT]	= &mmc2_output_clk.common.hw,
+		[CLK_SS]		= &ss_clk.common.hw,
+		[CLK_SPI0]		= &spi0_clk.common.hw,
+		[CLK_SPI1]		= &spi1_clk.common.hw,
+		[CLK_I2S0]		= &i2s0_clk.common.hw,
+		[CLK_I2S1]		= &i2s1_clk.common.hw,
+		[CLK_I2S2]		= &i2s2_clk.common.hw,
+		[CLK_TDM]		= &tdm_clk.common.hw,
+		[CLK_SPDIF]		= &spdif_clk.common.hw,
+		[CLK_USB_PHY0]		= &usb_phy0_clk.common.hw,
+		[CLK_USB_PHY1]		= &usb_phy1_clk.common.hw,
+		[CLK_USB_HSIC]		= &usb_hsic_clk.common.hw,
+		[CLK_USB_HSIC_12M]	= &usb_hsic_12m_clk.common.hw,
+		[CLK_USB_OHCI0]		= &usb_ohci0_clk.common.hw,
+		[CLK_DRAM]		= &dram_clk.common.hw,
+		[CLK_DRAM_VE]		= &dram_ve_clk.common.hw,
+		[CLK_DRAM_CSI]		= &dram_csi_clk.common.hw,
+		[CLK_TCON0]		= &tcon0_clk.common.hw,
+		[CLK_TCON1]		= &tcon1_clk.common.hw,
+		[CLK_CSI_MISC]		= &csi_misc_clk.common.hw,
+		[CLK_MIPI_CSI]		= &mipi_csi_clk.common.hw,
+		[CLK_CSI_MCLK]		= &csi_mclk_clk.common.hw,
+		[CLK_CSI_SCLK]		= &csi_sclk_clk.common.hw,
+		[CLK_VE]		= &ve_clk.common.hw,
+		[CLK_AVS]		= &avs_clk.common.hw,
+		[CLK_HDMI]		= &hdmi_clk.common.hw,
+		[CLK_HDMI_SLOW]		= &hdmi_slow_clk.common.hw,
+		[CLK_MBUS]		= &mbus_clk.common.hw,
+		[CLK_MIPI_DSI0]		= &mipi_dsi0_clk.common.hw,
+		[CLK_MIPI_DSI1]		= &mipi_dsi1_clk.common.hw,
+		[CLK_GPU_CORE]		= &gpu_core_clk.common.hw,
+		[CLK_GPU_MEMORY]	= &gpu_memory_clk.common.hw,
+		[CLK_GPU_HYD]		= &gpu_hyd_clk.common.hw,
+	},
+	.num	= CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun8i_a83t_ccu_resets[] = {
+	[RST_USB_PHY0]		= { 0x0cc, BIT(0) },
+	[RST_USB_PHY1]		= { 0x0cc, BIT(1) },
+	[RST_USB_HSIC]		= { 0x0cc, BIT(2) },
+	[RST_DRAM]		= { 0x0f4, BIT(31) },
+	[RST_MBUS]		= { 0x0fc, BIT(31) },
+	[RST_BUS_MIPI_DSI]	= { 0x2c0, BIT(1) },
+	[RST_BUS_SS]		= { 0x2c0, BIT(5) },
+	[RST_BUS_DMA]		= { 0x2c0, BIT(6) },
+	[RST_BUS_MMC0]		= { 0x2c0, BIT(8) },
+	[RST_BUS_MMC1]		= { 0x2c0, BIT(9) },
+	[RST_BUS_MMC2]		= { 0x2c0, BIT(10) },
+	[RST_BUS_NAND]		= { 0x2c0, BIT(13) },
+	[RST_BUS_DRAM]		= { 0x2c0, BIT(14) },
+	[RST_BUS_EMAC]		= { 0x2c0, BIT(17) },
+	[RST_BUS_HSTIMER]	= { 0x2c0, BIT(19) },
+	[RST_BUS_SPI0]		= { 0x2c0, BIT(20) },
+	[RST_BUS_SPI1]		= { 0x2c0, BIT(21) },
+	[RST_BUS_OTG]		= { 0x2c0, BIT(24) },
+	[RST_BUS_EHCI0]		= { 0x2c0, BIT(26) },
+	[RST_BUS_EHCI1]		= { 0x2c0, BIT(27) },
+	[RST_BUS_OHCI0]		= { 0x2c0, BIT(29) },
+	[RST_BUS_VE]		= { 0x2c4, BIT(0) },
+	[RST_BUS_TCON0]		= { 0x2c4, BIT(4) },
+	[RST_BUS_TCON1]		= { 0x2c4, BIT(5) },
+	[RST_BUS_CSI]		= { 0x2c4, BIT(8) },
+	[RST_BUS_HDMI0]		= { 0x2c4, BIT(10) },
+	[RST_BUS_HDMI1]		= { 0x2c4, BIT(11) },
+	[RST_BUS_DE]		= { 0x2c4, BIT(12) },
+	[RST_BUS_GPU]		= { 0x2c4, BIT(20) },
+	[RST_BUS_MSGBOX]	= { 0x2c4, BIT(21) },
+	[RST_BUS_SPINLOCK]	= { 0x2c4, BIT(22) },
+	[RST_BUS_LVDS]		= { 0x2c8, BIT(0) },
+	[RST_BUS_SPDIF]		= { 0x2d0, BIT(1) },
+	[RST_BUS_I2S0]		= { 0x2d0, BIT(12) },
+	[RST_BUS_I2S1]		= { 0x2d0, BIT(13) },
+	[RST_BUS_I2S2]		= { 0x2d0, BIT(14) },
+	[RST_BUS_TDM]		= { 0x2d0, BIT(15) },
+	[RST_BUS_I2C0]		= { 0x2d8, BIT(0) },
+	[RST_BUS_I2C1]		= { 0x2d8, BIT(1) },
+	[RST_BUS_I2C2]		= { 0x2d8, BIT(2) },
+	[RST_BUS_UART0]		= { 0x2d8, BIT(16) },
+	[RST_BUS_UART1]		= { 0x2d8, BIT(17) },
+	[RST_BUS_UART2]		= { 0x2d8, BIT(18) },
+	[RST_BUS_UART3]		= { 0x2d8, BIT(19) },
+	[RST_BUS_UART4]		= { 0x2d8, BIT(20) },
+};
+
+static const struct sunxi_ccu_desc sun8i_a83t_ccu_desc = {
+	.ccu_clks	= sun8i_a83t_ccu_clks,
+	.num_ccu_clks	= ARRAY_SIZE(sun8i_a83t_ccu_clks),
+
+	.hw_clks	= &sun8i_a83t_hw_clks,
+
+	.resets		= sun8i_a83t_ccu_resets,
+	.num_resets	= ARRAY_SIZE(sun8i_a83t_ccu_resets),
+};
+
+static int sun8i_a83t_ccu_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	void __iomem *reg;
+	u32 val;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	reg = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	/* Enforce d1 = 0, d2 = 0 for Audio PLL */
+	val = readl(reg + SUN8I_A83T_PLL_AUDIO_REG);
+	val &= ~(BIT(16) | BIT(18));
+	writel(val, reg + SUN8I_A83T_PLL_AUDIO_REG);
+
+	/* Enforce new timing mode for mmc2 */
+	val = readl(reg + SUN8I_A83T_MMC2_REG);
+	val |= BIT(30);
+	writel(val, reg + SUN8I_A83T_MMC2_REG);
+
+	return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun8i_a83t_ccu_desc);
+}
+
+static const struct of_device_id sun8i_a83t_ccu_ids[] = {
+	{ .compatible = "allwinner,sun8i-a83t-ccu" },
+	{ }
+};
+
+static struct platform_driver sun8i_a83t_ccu_driver = {
+	.probe	= sun8i_a83t_ccu_probe,
+	.driver	= {
+		.name	= "sun8i-a83t-ccu",
+		.of_match_table	= sun8i_a83t_ccu_ids,
+	},
+};
+builtin_platform_driver(sun8i_a83t_ccu_driver);
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a83t.h b/drivers/clk/sunxi-ng/ccu-sun8i-a83t.h
new file mode 100644
index 000000000000..d67edaf76748
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-a83t.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2016 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_SUN8I_A83T_H_
+#define _CCU_SUN8I_A83T_H_
+
+#include <dt-bindings/clock/sun8i-a83t-ccu.h>
+#include <dt-bindings/reset/sun8i-a83t-ccu.h>
+
+#define CLK_PLL_C0CPUX		0
+#define CLK_PLL_C1CPUX		1
+#define CLK_PLL_AUDIO		2
+#define CLK_PLL_VIDEO0		3
+#define CLK_PLL_VE		4
+#define CLK_PLL_DDR		5
+
+/* pll-periph is exported to the PRCM block */
+
+#define CLK_PLL_GPU		7
+#define CLK_PLL_HSIC		8
+
+/* pll-de is exported for the display engine */
+
+#define CLK_PLL_VIDEO1		10
+
+/* The CPUX clocks are exported */
+
+#define CLK_AXI0		13
+#define CLK_AXI1		14
+#define CLK_AHB1		15
+#define CLK_AHB2		16
+#define CLK_APB1		17
+#define CLK_APB2		18
+
+/* bus gates exported */
+
+#define CLK_CCI400		58
+
+/* module and usb clocks exported */
+
+#define CLK_DRAM		82
+
+/* dram gates and more module clocks exported */
+
+#define CLK_MBUS		95
+
+/* more module clocks exported */
+
+#define CLK_NUMBER		(CLK_GPU_HYD + 1)
+
+#endif /* _CCU_SUN8I_A83T_H_ */
diff --git a/include/dt-bindings/clock/sun8i-a83t-ccu.h b/include/dt-bindings/clock/sun8i-a83t-ccu.h
new file mode 100644
index 000000000000..78af5085f630
--- /dev/null
+++ b/include/dt-bindings/clock/sun8i-a83t-ccu.h
@@ -0,0 +1,140 @@
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_SUN8I_A83T_CCU_H_
+#define _DT_BINDINGS_CLOCK_SUN8I_A83T_CCU_H_
+
+#define CLK_PLL_PERIPH		6
+
+#define CLK_PLL_DE		9
+
+#define CLK_C0CPUX		11
+#define CLK_C1CPUX		12
+
+#define CLK_BUS_MIPI_DSI	19
+#define CLK_BUS_SS		20
+#define CLK_BUS_DMA		21
+#define CLK_BUS_MMC0		22
+#define CLK_BUS_MMC1		23
+#define CLK_BUS_MMC2		24
+#define CLK_BUS_NAND		25
+#define CLK_BUS_DRAM		26
+#define CLK_BUS_EMAC		27
+#define CLK_BUS_HSTIMER		28
+#define CLK_BUS_SPI0		29
+#define CLK_BUS_SPI1		30
+#define CLK_BUS_OTG		31
+#define CLK_BUS_EHCI0		32
+#define CLK_BUS_EHCI1		33
+#define CLK_BUS_OHCI0		34
+
+#define CLK_BUS_VE		35
+#define CLK_BUS_TCON0		36
+#define CLK_BUS_TCON1		37
+#define CLK_BUS_CSI		38
+#define CLK_BUS_HDMI		39
+#define CLK_BUS_DE		40
+#define CLK_BUS_GPU		41
+#define CLK_BUS_MSGBOX		42
+#define CLK_BUS_SPINLOCK	43
+
+#define CLK_BUS_SPDIF		44
+#define CLK_BUS_PIO		45
+#define CLK_BUS_I2S0		46
+#define CLK_BUS_I2S1		47
+#define CLK_BUS_I2S2		48
+#define CLK_BUS_TDM		49
+
+#define CLK_BUS_I2C0		50
+#define CLK_BUS_I2C1		51
+#define CLK_BUS_I2C2		52
+#define CLK_BUS_UART0		53
+#define CLK_BUS_UART1		54
+#define CLK_BUS_UART2		55
+#define CLK_BUS_UART3		56
+#define CLK_BUS_UART4		57
+
+#define CLK_NAND		59
+#define CLK_MMC0		60
+#define CLK_MMC0_SAMPLE		61
+#define CLK_MMC0_OUTPUT		62
+#define CLK_MMC1		63
+#define CLK_MMC1_SAMPLE		64
+#define CLK_MMC1_OUTPUT		65
+#define CLK_MMC2		66
+#define CLK_MMC2_SAMPLE		67
+#define CLK_MMC2_OUTPUT		68
+#define CLK_SS			69
+#define CLK_SPI0		70
+#define CLK_SPI1		71
+#define CLK_I2S0		72
+#define CLK_I2S1		73
+#define CLK_I2S2		74
+#define CLK_TDM			75
+#define CLK_SPDIF		76
+#define CLK_USB_PHY0		77
+#define CLK_USB_PHY1		78
+#define CLK_USB_HSIC		79
+#define CLK_USB_HSIC_12M	80
+#define CLK_USB_OHCI0		81
+
+#define CLK_DRAM_VE		83
+#define CLK_DRAM_CSI		84
+
+#define CLK_TCON0		85
+#define CLK_TCON1		86
+#define CLK_CSI_MISC		87
+#define CLK_MIPI_CSI		88
+#define CLK_CSI_MCLK		89
+#define CLK_CSI_SCLK		90
+#define CLK_VE			91
+#define CLK_AVS			92
+#define CLK_HDMI		93
+#define CLK_HDMI_SLOW		94
+
+#define CLK_MIPI_DSI0		96
+#define CLK_MIPI_DSI1		97
+#define CLK_GPU_CORE		98
+#define CLK_GPU_MEMORY		99
+#define CLK_GPU_HYD		100
+
+#endif /* _DT_BINDINGS_CLOCK_SUN8I_A83T_CCU_H_ */
diff --git a/include/dt-bindings/reset/sun8i-a83t-ccu.h b/include/dt-bindings/reset/sun8i-a83t-ccu.h
new file mode 100644
index 000000000000..784f6e11664e
--- /dev/null
+++ b/include/dt-bindings/reset/sun8i-a83t-ccu.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RESET_SUN8I_A83T_CCU_H_
+#define _DT_BINDINGS_RESET_SUN8I_A83T_CCU_H_
+
+#define RST_USB_PHY0		0
+#define RST_USB_PHY1		1
+#define RST_USB_HSIC		2
+
+#define RST_DRAM		3
+#define RST_MBUS		4
+
+#define RST_BUS_MIPI_DSI	5
+#define RST_BUS_SS		6
+#define RST_BUS_DMA		7
+#define RST_BUS_MMC0		8
+#define RST_BUS_MMC1		9
+#define RST_BUS_MMC2		10
+#define RST_BUS_NAND		11
+#define RST_BUS_DRAM		12
+#define RST_BUS_EMAC		13
+#define RST_BUS_HSTIMER		14
+#define RST_BUS_SPI0		15
+#define RST_BUS_SPI1		16
+#define RST_BUS_OTG		17
+#define RST_BUS_EHCI0		18
+#define RST_BUS_EHCI1		19
+#define RST_BUS_OHCI0		20
+
+#define RST_BUS_VE		21
+#define RST_BUS_TCON0		22
+#define RST_BUS_TCON1		23
+#define RST_BUS_CSI		24
+#define RST_BUS_HDMI0		25
+#define RST_BUS_HDMI1		26
+#define RST_BUS_DE		27
+#define RST_BUS_GPU		28
+#define RST_BUS_MSGBOX		29
+#define RST_BUS_SPINLOCK	30
+
+#define RST_BUS_LVDS		31
+
+#define RST_BUS_SPDIF		32
+#define RST_BUS_I2S0		33
+#define RST_BUS_I2S1		34
+#define RST_BUS_I2S2		35
+#define RST_BUS_TDM		36
+
+#define RST_BUS_I2C0		37
+#define RST_BUS_I2C1		38
+#define RST_BUS_I2C2		39
+#define RST_BUS_UART0		40
+#define RST_BUS_UART1		41
+#define RST_BUS_UART2		42
+#define RST_BUS_UART3		43
+#define RST_BUS_UART4		44
+
+#endif /* _DT_BINDINGS_RESET_SUN8I_A83T_CCU_H_ */
-- 
2.11.0

[PATCH v2 6/8] ARM: sun8i: a83t: Add CCU device nodes

[Chen-Yu Tsai]

Now that we have support for the A83T CCU, add a device node for it,
and replace any existing placeholder clock phandles with the correct
ones.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index c0a1e4f74b89..c9a5d07b2ada 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -162,13 +162,23 @@
 		#size-cells = <1>;
 		ranges;
 
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun8i-a83t-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc16Md512>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		pio: pinctrl@1c20800 {
 			compatible = "allwinner,sun8i-a83t-pinctrl";
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x01c20800 0x400>;
-			clocks = <&osc24M>;
+			clocks = <&ccu 45>, <&osc24M>, <&osc16Md512>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -214,7 +224,8 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc24M>;
+			clocks = <&ccu 53>;
+			resets = <&ccu 40>;
 			status = "disabled";
 		};
 
-- 
2.11.0

[PATCH v2 7/8] ARM: sun8i: a83t: Set clock accuracy for 24MHz oscillator

[Chen-Yu Tsai]

The datasheets for Allwinner SoCs set strict requirements on the
stability of the external crystal oscillators. Add the accuracy
for the main 24MHz oscillator to the device tree.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index c9a5d07b2ada..e12dd7170b8f 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -126,6 +126,7 @@
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
+			clock-accuracy = <50000>;
 			clock-output-names = "osc24M";
 		};
 
-- 
2.11.0

[PATCH v2 8/8] ARM: sun8i: a83t: Switch to CCU device tree binding macros

[Chen-Yu Tsai]

Now that the CCU device tree binding headers have been merged, we can
use the properly named macros in the device tree, instead of raw
numbers.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index e12dd7170b8f..050d3e347740 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -44,6 +44,9 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
+#include <dt-bindings/clock/sun8i-a83t-ccu.h>
+#include <dt-bindings/reset/sun8i-a83t-ccu.h>
+
 / {
 	interrupt-parent = <&gic>;
 	#address-cells = <1>;
@@ -178,7 +181,7 @@
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x01c20800 0x400>;
-			clocks = <&ccu 45>, <&osc24M>, <&osc16Md512>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc16Md512>;
 			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
@@ -225,8 +228,8 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&ccu 53>;
-			resets = <&ccu 40>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
 			status = "disabled";
 		};
 
-- 
2.11.0

[PATCH v2 0/8] clk: sunxi-ng: Add support for A83T CCU

[Chen-Yu Tsai]

Hi everyone,

(Resent with devicetree mailing list CC-ed.)
This is v2 of my A83T CCU series. This is for 4.13.

Changes since v1:

  - Dropped two patches that were merged

  - Added clk core flag to disable caching of clock phases

  - Added support for multiple variable pre-dividers

  - Merged "pll-periph-ahb1" pre-divider clock into "ahb1" clock
    with multiple variable pre-dividers

  - Introduced new class of phase clocks that return -ENOTSUPP
    when the clock is in new timing mode

  - Force mmc2 clock to new timing mode

  - Added back mmc2 output and sample clocks

  - Fixed bit ops for forcing audio PLL configuration

  - Added requirement for "losc" clock in device tree binding

  - Stripped leading 0 in device node name

  - Updated subject prefixes for various patches

Patch 1 adds a compatible string for the A83T CCU to the sunxi-ccu
bindings.

Patch 2 adds a CLK_GET_PHASE_NOCACHE flag to the clk core, asking it
not to cache clock phase values. This is similar to CLK_GET_RATE_NOCACHE.
Patch 5 has a compile time dependency on this patch, for the flag value.

Patch 3 adds a new class of phase clocks that check the new timing mode
bit, and returns an error if it is set, which indicates the phase delays
no longer apply. This is a clean way to signal which timing mode the mmc
clock is in, without using any custom functions or callbacks. We don't
support runtime switching of modes.

Patch 4 adds support for multiple variable pre-dividers to the sunxi-ng
mux class.

Patch 5 adds the driver for the A83T CCU.

Patch 6 adds the CCU device nodes, and fixes up any existing clock
phandles in the dtsi, without using the macros.

Patch 7 sets the clock accuracy for the main oscillator.

Patch 8 is for the next -rc2, switch the clock indices from raw numbers
to macros we introduced with the driver. This will be updated if more
peripherals are introduced in the same cycle.

Let me know what you think.

Cover letter excerpt from v1:

This is yet another series that adds support for the A83T CCU.
The A83T CCU has a mix of new styled (like the A80) clocks at
old (like A3x) offsets. Some differences include:

  - D1/D2 style PLL clocks
  - divisible audio module clocks
  - new timing mode for mmc2 module clock


Regards
ChenYu

Chen-Yu Tsai (8):
  dt-bindings: clock: sunxi-ccu: Add compatible string for A83T CCU
  clk: Provide option to query hardware for clk phase
  clk: sunxi-ng: Add class of phase clocks supporting MMC new timing
    modes
  clk: sunxi-ng: Support multiple variable pre-dividers
  clk: sunxi-ng: Add driver for A83T CCU
  ARM: sun8i: a83t: Add CCU device nodes
  ARM: sun8i: a83t: Set clock accuracy for 24MHz oscillator
  ARM: sun8i: a83t: Switch to CCU device tree binding macros

 .../devicetree/bindings/clock/sunxi-ccu.txt        |   2 +
 arch/arm/boot/dts/sun8i-a83t.dtsi                  |  19 +-
 drivers/clk/clk.c                                  |   6 +-
 drivers/clk/sunxi-ng/Kconfig                       |  10 +
 drivers/clk/sunxi-ng/Makefile                      |   1 +
 drivers/clk/sunxi-ng/ccu-sun50i-a64.c              |  10 +-
 drivers/clk/sunxi-ng/ccu-sun6i-a31.c               |  10 +-
 drivers/clk/sunxi-ng/ccu-sun8i-a23.c               |  10 +-
 drivers/clk/sunxi-ng/ccu-sun8i-a33.c               |  10 +-
 drivers/clk/sunxi-ng/ccu-sun8i-a83t.c              | 911 +++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu-sun8i-a83t.h              |  64 ++
 drivers/clk/sunxi-ng/ccu-sun8i-h3.c                |  10 +-
 drivers/clk/sunxi-ng/ccu-sun8i-r.c                 |  10 +-
 drivers/clk/sunxi-ng/ccu-sun8i-v3s.c               |  10 +-
 drivers/clk/sunxi-ng/ccu_mux.c                     |  15 +-
 drivers/clk/sunxi-ng/ccu_mux.h                     |  13 +-
 drivers/clk/sunxi-ng/ccu_phase.c                   |  47 ++
 drivers/clk/sunxi-ng/ccu_phase.h                   |  16 +
 include/dt-bindings/clock/sun8i-a83t-ccu.h         | 140 ++++
 include/dt-bindings/reset/sun8i-a83t-ccu.h         |  98 +++
 include/linux/clk-provider.h                       |   1 +
 21 files changed, 1363 insertions(+), 50 deletions(-)
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-a83t.c
 create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-a83t.h
 create mode 100644 include/dt-bindings/clock/sun8i-a83t-ccu.h
 create mode 100644 include/dt-bindings/reset/sun8i-a83t-ccu.h

-- 
2.11.0

[PATCH v2 6/8] ARM: sun8i: a83t: Add CCU device nodes

[Chen-Yu Tsai]

Now that we have support for the A83T CCU, add a device node for it,
and replace any existing placeholder clock phandles with the correct
ones.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index c0a1e4f74b89..c9a5d07b2ada 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -162,13 +162,23 @@
 		#size-cells = <1>;
 		ranges;
 
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun8i-a83t-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc16Md512>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		pio: pinctrl@1c20800 {
 			compatible = "allwinner,sun8i-a83t-pinctrl";
 			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x01c20800 0x400>;
-			clocks = <&osc24M>;
+			clocks = <&ccu 45>, <&osc24M>, <&osc16Md512>;
+			clock-names = "apb", "hosc", "losc";
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -214,7 +224,8 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc24M>;
+			clocks = <&ccu 53>;
+			resets = <&ccu 40>;
 			status = "disabled";
 		};
 
-- 
2.11.0