[PATCH 3.18 00/16] 3.18.59-stable review

[PATCH 3.18 00/16] 3.18.59-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.18.59 release.
There are 16 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu Jun 29 12:44:17 UTC 2017.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.59-rc1.gz
or in the git tree and branch at:
  git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.18.59-rc1

Jason A. Donenfeld <Jason@zx2c4.com>
    mac80211/wpa: use constant time memory comparison for MACs

Russell King <rmk+kernel@armlinux.org.uk>
    net: phy: fix marvell phy status reading

William Wu <william.wu@rock-chips.com>
    usb: gadget: f_fs: avoid out of bounds access on comp_desc

Michael Ellerman <mpe@ellerman.id.au>
    powerpc/slb: Force a full SLB flush when we insert for a bad EA

Joël Esponde <joel.esponde@honeywell.com>
    mtd: spi-nor: fix spansion quad enable

Tobias Wolf <dev-NTEO@vplace.de>
    of: Add check to of_scan_flat_dt() before accessing initial_boot_params

David Howells <dhowells@redhat.com>
    rxrpc: Fix several cases where a padded len isn't checked in ticket decode

Nicholas Bellinger <nab@linux-iscsi.org>
    target: Fix kref->refcount underflow in transport_cmd_finish_abort

Daniel Drake <drake@endlessm.com>
    Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list

Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
    powerpc/kprobes: Pause function_graph tracing during jprobes handling

Eric W. Biederman <ebiederm@xmission.com>
    signal: Only reschedule timers on signals timers have sent

Pavel Shilovsky <pshilov@microsoft.com>
    CIFS: Improve readdir verbosity

Paul Mackerras <paulus@ozlabs.org>
    KVM: PPC: Book3S HV: Preserve userspace HTM state properly

Ilya Matveychikov <matvejchikov@gmail.com>
    lib/cmdline.c: fix get_options() overflow while parsing ranges

NeilBrown <neilb@suse.com>
    autofs: sanity check status reported with AUTOFS_DEV_IOCTL_FAIL

Kees Cook <keescook@chromium.org>
    fs/exec.c: account for argv/envp pointers


-------------

Diffstat:

 Makefile                               |  4 +--
 arch/powerpc/kernel/kprobes.c          | 11 ++++++
 arch/powerpc/kvm/book3s_hv.c           | 21 +++++++++++
 arch/powerpc/mm/slb_low.S              | 10 ++++++
 drivers/input/serio/i8042-x86ia64io.h  |  7 ++++
 drivers/mtd/spi-nor/spi-nor.c          |  7 ++++
 drivers/net/phy/marvell.c              |  2 --
 drivers/of/fdt.c                       |  9 +++--
 drivers/target/target_core_internal.h  |  2 +-
 drivers/target/target_core_tmr.c       | 16 ++++-----
 drivers/target/target_core_transport.c |  9 +++--
 drivers/usb/gadget/function/f_fs.c     | 10 +++---
 fs/autofs4/dev-ioctl.c                 |  2 +-
 fs/cifs/smb1ops.c                      |  9 +++--
 fs/cifs/smb2ops.c                      |  4 +--
 fs/exec.c                              | 28 ++++++++++++---
 kernel/signal.c                        | 20 +++++++----
 lib/cmdline.c                          |  6 ++--
 net/mac80211/wpa.c                     |  5 +--
 net/rxrpc/ar-key.c                     | 64 ++++++++++++++++++----------------
 20 files changed, 172 insertions(+), 74 deletions(-)

[PATCH 3.18 01/16] fs/exec.c: account for argv/envp pointers

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

commit 98da7d08850fb8bdeb395d6368ed15753304aa0c upstream.

When limiting the argv/envp strings during exec to 1/4 of the stack limit,
the storage of the pointers to the strings was not included.  This means
that an exec with huge numbers of tiny strings could eat 1/4 of the stack
limit in strings and then additional space would be later used by the
pointers to the strings.

For example, on 32-bit with a 8MB stack rlimit, an exec with 1677721
single-byte strings would consume less than 2MB of stack, the max (8MB /
4) amount allowed, but the pointers to the strings would consume the
remaining additional stack space (1677721 * 4 == 6710884).

The result (1677721 + 6710884 == 8388605) would exhaust stack space
entirely.  Controlling this stack exhaustion could result in
pathological behavior in setuid binaries (CVE-2017-1000365).

[akpm@linux-foundation.org: additional commenting from Kees]
Fixes: b6a2fea39318 ("mm: variable length argument support")
Link: http://lkml.kernel.org/r/20170622001720.GA32173@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Qualys Security Advisory <qsa@qualys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/exec.c |   28 ++++++++++++++++++++++++----
 1 file changed, 24 insertions(+), 4 deletions(-)

--- a/fs/exec.c
+++ b/fs/exec.c
@@ -199,8 +199,26 @@ static struct page *get_arg_page(struct
 
 	if (write) {
 		unsigned long size = bprm->vma->vm_end - bprm->vma->vm_start;
+		unsigned long ptr_size;
 		struct rlimit *rlim;
 
+		/*
+		 * Since the stack will hold pointers to the strings, we
+		 * must account for them as well.
+		 *
+		 * The size calculation is the entire vma while each arg page is
+		 * built, so each time we get here it's calculating how far it
+		 * is currently (rather than each call being just the newly
+		 * added size from the arg page).  As a result, we need to
+		 * always add the entire size of the pointers, so that on the
+		 * last call to get_arg_page() we'll actually have the entire
+		 * correct size.
+		 */
+		ptr_size = (bprm->argc + bprm->envc) * sizeof(void *);
+		if (ptr_size > ULONG_MAX - size)
+			goto fail;
+		size += ptr_size;
+
 		acct_arg_size(bprm, size / PAGE_SIZE);
 
 		/*
@@ -218,13 +236,15 @@ static struct page *get_arg_page(struct
 		 *    to work from.
 		 */
 		rlim = current->signal->rlim;
-		if (size > ACCESS_ONCE(rlim[RLIMIT_STACK].rlim_cur) / 4) {
-			put_page(page);
-			return NULL;
-		}
+		if (size > READ_ONCE(rlim[RLIMIT_STACK].rlim_cur) / 4)
+			goto fail;
 	}
 
 	return page;
+
+fail:
+	put_page(page);
+	return NULL;
 }
 
 static void put_arg_page(struct page *page)

[PATCH 3.18 02/16] autofs: sanity check status reported with AUTOFS_DEV_IOCTL_FAIL

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: NeilBrown <neilb@suse.com>

commit 9fa4eb8e490a28de40964b1b0e583d8db4c7e57c upstream.

If a positive status is passed with the AUTOFS_DEV_IOCTL_FAIL ioctl,
autofs4_d_automount() will return

   ERR_PTR(status)

with that status to follow_automount(), which will then dereference an
invalid pointer.

So treat a positive status the same as zero, and map to ENOENT.

See comment in systemd src/core/automount.c::automount_send_ready().

Link: http://lkml.kernel.org/r/871sqwczx5.fsf@notabene.neil.brown.name
Signed-off-by: NeilBrown <neilb@suse.com>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/autofs4/dev-ioctl.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/autofs4/dev-ioctl.c
+++ b/fs/autofs4/dev-ioctl.c
@@ -331,7 +331,7 @@ static int autofs_dev_ioctl_fail(struct
 	int status;
 
 	token = (autofs_wqt_t) param->fail.token;
-	status = param->fail.status ? param->fail.status : -ENOENT;
+	status = param->fail.status < 0 ? param->fail.status : -ENOENT;
 	return autofs4_wait_release(sbi, token, status);
 }
 

[PATCH 3.18 03/16] lib/cmdline.c: fix get_options() overflow while parsing ranges

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ilya Matveychikov <matvejchikov@gmail.com>

commit a91e0f680bcd9e10c253ae8b62462a38bd48f09f upstream.

When using get_options() it's possible to specify a range of numbers,
like 1-100500.  The problem is that it doesn't track array size while
calling internally to get_range() which iterates over the range and
fills the memory with numbers.

Link: http://lkml.kernel.org/r/2613C75C-B04D-4BFF-82A6-12F97BA0F620@gmail.com
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 lib/cmdline.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/lib/cmdline.c
+++ b/lib/cmdline.c
@@ -22,14 +22,14 @@
  *	the values[M, M+1, ..., N] into the ints array in get_options.
  */
 
-static int get_range(char **str, int *pint)
+static int get_range(char **str, int *pint, int n)
 {
 	int x, inc_counter, upper_range;
 
 	(*str)++;
 	upper_range = simple_strtol((*str), NULL, 0);
 	inc_counter = upper_range - *pint;
-	for (x = *pint; x < upper_range; x++)
+	for (x = *pint; n && x < upper_range; x++, n--)
 		*pint++ = x;
 	return inc_counter;
 }
@@ -96,7 +96,7 @@ char *get_options(const char *str, int n
 			break;
 		if (res == 3) {
 			int range_nums;
-			range_nums = get_range((char **)&str, ints + i);
+			range_nums = get_range((char **)&str, ints + i, nints - i);
 			if (range_nums < 0)
 				break;
 			/*

[PATCH 3.18 04/16] KVM: PPC: Book3S HV: Preserve userspace HTM state properly

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Mackerras <paulus@ozlabs.org>

commit 46a704f8409f79fd66567ad3f8a7304830a84293 upstream.

If userspace attempts to call the KVM_RUN ioctl when it has hardware
transactional memory (HTM) enabled, the values that it has put in the
HTM-related SPRs TFHAR, TFIAR and TEXASR will get overwritten by
guest values.  To fix this, we detect this condition and save those
SPR values in the thread struct, and disable HTM for the task.  If
userspace goes to access those SPRs or the HTM facility in future,
a TM-unavailable interrupt will occur and the handler will reload
those SPRs and re-enable HTM.

If userspace has started a transaction and suspended it, we would
currently lose the transactional state in the guest entry path and
would almost certainly get a "TM Bad Thing" interrupt, which would
cause the host to crash.  To avoid this, we detect this case and
return from the KVM_RUN ioctl with an EINVAL error, with the KVM
exit reason set to KVM_EXIT_FAIL_ENTRY.

Fixes: b005255e12a3 ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08)
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kvm/book3s_hv.c |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -1956,6 +1956,27 @@ static int kvmppc_vcpu_run_hv(struct kvm
 		return -EINVAL;
 	}
 
+	/*
+	 * Don't allow entry with a suspended transaction, because
+	 * the guest entry/exit code will lose it.
+	 * If the guest has TM enabled, save away their TM-related SPRs
+	 * (they will get restored by the TM unavailable interrupt).
+	 */
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+	if (cpu_has_feature(CPU_FTR_TM) && current->thread.regs &&
+	    (current->thread.regs->msr & MSR_TM)) {
+		if (MSR_TM_ACTIVE(current->thread.regs->msr)) {
+			run->exit_reason = KVM_EXIT_FAIL_ENTRY;
+			run->fail_entry.hardware_entry_failure_reason = 0;
+			return -EINVAL;
+		}
+		current->thread.tm_tfhar = mfspr(SPRN_TFHAR);
+		current->thread.tm_tfiar = mfspr(SPRN_TFIAR);
+		current->thread.tm_texasr = mfspr(SPRN_TEXASR);
+		current->thread.regs->msr &= ~MSR_TM;
+	}
+#endif
+
 	kvmppc_core_prepare_to_enter(vcpu);
 
 	/* No need to go into the guest when all we'll do is come back out */

[PATCH 3.18 05/16] CIFS: Improve readdir verbosity

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pavel Shilovsky <pshilov@microsoft.com>

commit dcd87838c06f05ab7650b249ebf0d5b57ae63e1e upstream.

Downgrade the loglevel for SMB2 to prevent filling the log
with messages if e.g. readdir was interrupted. Also make SMB2
and SMB1 codepaths do the same logging during readdir.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/smb1ops.c |    9 +++++++--
 fs/cifs/smb2ops.c |    4 ++--
 2 files changed, 9 insertions(+), 4 deletions(-)

--- a/fs/cifs/smb1ops.c
+++ b/fs/cifs/smb1ops.c
@@ -849,8 +849,13 @@ cifs_query_dir_first(const unsigned int
 		     struct cifs_fid *fid, __u16 search_flags,
 		     struct cifs_search_info *srch_inf)
 {
-	return CIFSFindFirst(xid, tcon, path, cifs_sb,
-			     &fid->netfid, search_flags, srch_inf, true);
+	int rc;
+
+	rc = CIFSFindFirst(xid, tcon, path, cifs_sb,
+			   &fid->netfid, search_flags, srch_inf, true);
+	if (rc)
+		cifs_dbg(FYI, "find first failed=%d\n", rc);
+	return rc;
 }
 
 static int
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -842,7 +842,7 @@ smb2_query_dir_first(const unsigned int
 	rc = SMB2_open(xid, &oparms, utf16_path, &oplock, NULL, NULL);
 	kfree(utf16_path);
 	if (rc) {
-		cifs_dbg(VFS, "open dir failed\n");
+		cifs_dbg(FYI, "open dir failed rc=%d\n", rc);
 		return rc;
 	}
 
@@ -852,7 +852,7 @@ smb2_query_dir_first(const unsigned int
 	rc = SMB2_query_directory(xid, tcon, fid->persistent_fid,
 				  fid->volatile_fid, 0, srch_inf);
 	if (rc) {
-		cifs_dbg(VFS, "query directory failed\n");
+		cifs_dbg(FYI, "query directory failed rc=%d\n", rc);
 		SMB2_close(xid, tcon, fid->persistent_fid, fid->volatile_fid);
 	}
 	return rc;

[PATCH 3.18 06/16] signal: Only reschedule timers on signals timers have sent

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric W. Biederman <ebiederm@xmission.com>

commit 57db7e4a2d92c2d3dfbca4ef8057849b2682436b upstream.

Thomas Gleixner  wrote:
> The CRIU support added a 'feature' which allows a user space task to send
> arbitrary (kernel) signals to itself. The changelog says:
>
>   The kernel prevents sending of siginfo with positive si_code, because
>   these codes are reserved for kernel.  I think we can allow a task to
>   send such a siginfo to itself.  This operation should not be dangerous.
>
> Quite contrary to that claim, it turns out that it is outright dangerous
> for signals with info->si_code == SI_TIMER. The following code sequence in
> a user space task allows to crash the kernel:
>
>    id = timer_create(CLOCK_XXX, ..... signo = SIGX);
>    timer_set(id, ....);
>    info->si_signo = SIGX;
>    info->si_code = SI_TIMER:
>    info->_sifields._timer._tid = id;
>    info->_sifields._timer._sys_private = 2;
>    rt_[tg]sigqueueinfo(..., SIGX, info);
>    sigemptyset(&sigset);
>    sigaddset(&sigset, SIGX);
>    rt_sigtimedwait(sigset, info);
>
> For timers based on CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID this
> results in a kernel crash because sigwait() dequeues the signal and the
> dequeue code observes:
>
>   info->si_code == SI_TIMER && info->_sifields._timer._sys_private != 0
>
> which triggers the following callchain:
>
>  do_schedule_next_timer() -> posix_cpu_timer_schedule() -> arm_timer()
>
> arm_timer() executes a list_add() on the timer, which is already armed via
> the timer_set() syscall. That's a double list add which corrupts the posix
> cpu timer list. As a consequence the kernel crashes on the next operation
> touching the posix cpu timer list.
>
> Posix clocks which are internally implemented based on hrtimers are not
> affected by this because hrtimer_start() can handle already armed timers
> nicely, but it's a reliable way to trigger the WARN_ON() in
> hrtimer_forward(), which complains about calling that function on an
> already armed timer.

This problem has existed since the posix timer code was merged into
2.5.63. A few releases earlier in 2.5.60 ptrace gained the ability to
inject not just a signal (which linux has supported since 1.0) but the
full siginfo of a signal.

The core problem is that the code will reschedule in response to
signals getting dequeued not just for signals the timers sent but
for other signals that happen to a si_code of SI_TIMER.

Avoid this confusion by testing to see if the queued signal was
preallocated as all timer signals are preallocated, and so far
only the timer code preallocates signals.

Move the check for if a timer needs to be rescheduled up into
collect_signal where the preallocation check must be performed,
and pass the result back to dequeue_signal where the code reschedules
timers.   This makes it clear why the code cares about preallocated
timers.

Reported-by: Thomas Gleixner <tglx@linutronix.de>
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Reference: 66dd34ad31e5 ("signal: allow to send any siginfo to itself")
Reference: 1669ce53e2ff ("Add PTRACE_GETSIGINFO and PTRACE_SETSIGINFO")
Fixes: db8b50ba75f2 ("[PATCH] POSIX clocks & timers")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/signal.c |   20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -543,7 +543,8 @@ unblock_all_signals(void)
 	spin_unlock_irqrestore(&current->sighand->siglock, flags);
 }
 
-static void collect_signal(int sig, struct sigpending *list, siginfo_t *info)
+static void collect_signal(int sig, struct sigpending *list, siginfo_t *info,
+			   bool *resched_timer)
 {
 	struct sigqueue *q, *first = NULL;
 
@@ -565,6 +566,12 @@ static void collect_signal(int sig, stru
 still_pending:
 		list_del_init(&first->list);
 		copy_siginfo(info, &first->info);
+
+		*resched_timer =
+			(first->flags & SIGQUEUE_PREALLOC) &&
+			(info->si_code == SI_TIMER) &&
+			(info->si_sys_private);
+
 		__sigqueue_free(first);
 	} else {
 		/*
@@ -581,7 +588,7 @@ still_pending:
 }
 
 static int __dequeue_signal(struct sigpending *pending, sigset_t *mask,
-			siginfo_t *info)
+			siginfo_t *info, bool *resched_timer)
 {
 	int sig = next_signal(pending, mask);
 
@@ -595,7 +602,7 @@ static int __dequeue_signal(struct sigpe
 			}
 		}
 
-		collect_signal(sig, pending, info);
+		collect_signal(sig, pending, info, resched_timer);
 	}
 
 	return sig;
@@ -609,15 +616,16 @@ static int __dequeue_signal(struct sigpe
  */
 int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
 {
+	bool resched_timer = false;
 	int signr;
 
 	/* We only dequeue private signals from ourselves, we don't let
 	 * signalfd steal them
 	 */
-	signr = __dequeue_signal(&tsk->pending, mask, info);
+	signr = __dequeue_signal(&tsk->pending, mask, info, &resched_timer);
 	if (!signr) {
 		signr = __dequeue_signal(&tsk->signal->shared_pending,
-					 mask, info);
+					 mask, info, &resched_timer);
 		/*
 		 * itimer signal ?
 		 *
@@ -662,7 +670,7 @@ int dequeue_signal(struct task_struct *t
 		 */
 		current->jobctl |= JOBCTL_STOP_DEQUEUED;
 	}
-	if ((info->si_code & __SI_MASK) == __SI_TIMER && info->si_sys_private) {
+	if (resched_timer) {
 		/*
 		 * Release the siglock to ensure proper locking order
 		 * of timer locks outside of siglocks.  Note, we leave

[PATCH 3.18 07/16] powerpc/kprobes: Pause function_graph tracing during jprobes handling

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>

commit a9f8553e935f26cb5447f67e280946b0923cd2dc upstream.

This fixes a crash when function_graph and jprobes are used together.
This is essentially commit 237d28db036e ("ftrace/jprobes/x86: Fix
conflict between jprobes and function graph tracing"), but for powerpc.

Jprobes breaks function_graph tracing since the jprobe hook needs to use
jprobe_return(), which never returns back to the hook, but instead to
the original jprobe'd function. The solution is to momentarily pause
function_graph tracing before invoking the jprobe hook and re-enable it
when returning back to the original jprobe'd function.

Fixes: 6794c78243bf ("powerpc64: port of the function graph tracer")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/kernel/kprobes.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -514,6 +514,15 @@ int __kprobes setjmp_pre_handler(struct
 #endif
 #endif
 
+	/*
+	 * jprobes use jprobe_return() which skips the normal return
+	 * path of the function, and this messes up the accounting of the
+	 * function graph tracer.
+	 *
+	 * Pause function graph tracing while performing the jprobe function.
+	 */
+	pause_graph_tracing();
+
 	return 1;
 }
 
@@ -536,6 +545,8 @@ int __kprobes longjmp_break_handler(stru
 	 * saved regs...
 	 */
 	memcpy(regs, &kcb->jprobe_saved_regs, sizeof(struct pt_regs));
+	/* It's OK to start function graph tracing again */
+	unpause_graph_tracing();
 	preempt_enable_no_resched();
 	return 1;
 }

[PATCH 3.18 08/16] Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Drake <drake@endlessm.com>

commit 817ae460c784f32cd45e60b2b1b21378c3c6a847 upstream.

Without this quirk, the touchpad is not responsive on this product, with
the following message repeated in the logs:

 psmouse serio1: bad data from KBC - timeout

Add it to the notimeout list alongside other similar Fujitsu laptops.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/serio/i8042-x86ia64io.h |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -688,6 +688,13 @@ static const struct dmi_system_id __init
 			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U574"),
 		},
 	},
+	{
+		/* Fujitsu UH554 laptop */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK UH544"),
+		},
+	},
 	{ }
 };
 

[PATCH 3.18 09/16] target: Fix kref->refcount underflow in transport_cmd_finish_abort

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit 73d4e580ccc5c3e05cea002f18111f66c9c07034 upstream.

This patch fixes a se_cmd->cmd_kref underflow during CMD_T_ABORTED
when a fabric driver drops it's second reference from below the
target_core_tmr.c based callers of transport_cmd_finish_abort().

Recently with the conversion of kref to refcount_t, this bug was
manifesting itself as:

[705519.601034] refcount_t: underflow; use-after-free.
[705519.604034] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 20116.512 msecs
[705539.719111] ------------[ cut here ]------------
[705539.719117] WARNING: CPU: 3 PID: 26510 at lib/refcount.c:184 refcount_sub_and_test+0x33/0x51

Since the original kref atomic_t based kref_put() didn't check for
underflow and only invoked the final callback when zero was reached,
this bug did not manifest in practice since all se_cmd memory is
using preallocated tags.

To address this, go ahead and propigate the existing return from
transport_put_cmd() up via transport_cmd_finish_abort(), and
change transport_cmd_finish_abort() + core_tmr_handle_tas_abort()
callers to only do their local target_put_sess_cmd() if necessary.

Reported-by: Bart Van Assche <bart.vanassche@sandisk.com>
Tested-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Himanshu Madhani <himanshu.madhani@qlogic.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Tested-by: Gary Guo <ghg@datera.io>
Tested-by: Chu Yuan Lin <cyl@datera.io>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_internal.h  |    2 +-
 drivers/target/target_core_tmr.c       |   16 ++++++++--------
 drivers/target/target_core_transport.c |    9 ++++++---
 3 files changed, 15 insertions(+), 12 deletions(-)

--- a/drivers/target/target_core_internal.h
+++ b/drivers/target/target_core_internal.h
@@ -92,7 +92,7 @@ int	init_se_kmem_caches(void);
 void	release_se_kmem_caches(void);
 u32	scsi_get_new_index(scsi_index_t);
 void	transport_subsystem_check_init(void);
-void	transport_cmd_finish_abort(struct se_cmd *, int);
+int	transport_cmd_finish_abort(struct se_cmd *, int);
 unsigned char *transport_dump_cmd_direction(struct se_cmd *);
 void	transport_dump_dev_state(struct se_device *, char *, int *);
 void	transport_dump_dev_info(struct se_device *, struct se_lun *,
--- a/drivers/target/target_core_tmr.c
+++ b/drivers/target/target_core_tmr.c
@@ -78,7 +78,7 @@ void core_tmr_release_req(struct se_tmr_
 	kfree(tmr);
 }
 
-static void core_tmr_handle_tas_abort(struct se_cmd *cmd, int tas)
+static int core_tmr_handle_tas_abort(struct se_cmd *cmd, int tas)
 {
 	unsigned long flags;
 	bool remove = true, send_tas;
@@ -94,7 +94,7 @@ static void core_tmr_handle_tas_abort(st
 		transport_send_task_abort(cmd);
 	}
 
-	transport_cmd_finish_abort(cmd, remove);
+	return transport_cmd_finish_abort(cmd, remove);
 }
 
 static int target_check_cdb_and_preempt(struct list_head *list,
@@ -190,8 +190,8 @@ void core_tmr_abort_task(
 		cancel_work_sync(&se_cmd->work);
 		transport_wait_for_tasks(se_cmd);
 
-		transport_cmd_finish_abort(se_cmd, true);
-		target_put_sess_cmd(se_cmd);
+		if (!transport_cmd_finish_abort(se_cmd, true))
+			target_put_sess_cmd(se_cmd);
 
 		printk("ABORT_TASK: Sending TMR_FUNCTION_COMPLETE for"
 				" ref_tag: %d\n", ref_tag);
@@ -291,8 +291,8 @@ static void core_tmr_drain_tmr_list(
 		cancel_work_sync(&cmd->work);
 		transport_wait_for_tasks(cmd);
 
-		transport_cmd_finish_abort(cmd, 1);
-		target_put_sess_cmd(cmd);
+		if (!transport_cmd_finish_abort(cmd, 1))
+			target_put_sess_cmd(cmd);
 	}
 }
 
@@ -390,8 +390,8 @@ static void core_tmr_drain_state_list(
 		cancel_work_sync(&cmd->work);
 		transport_wait_for_tasks(cmd);
 
-		core_tmr_handle_tas_abort(cmd, tas);
-		target_put_sess_cmd(cmd);
+		if (!core_tmr_handle_tas_abort(cmd, tas))
+			target_put_sess_cmd(cmd);
 	}
 }
 
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -604,9 +604,10 @@ static void transport_lun_remove_cmd(str
 		percpu_ref_put(&lun->lun_ref);
 }
 
-void transport_cmd_finish_abort(struct se_cmd *cmd, int remove)
+int transport_cmd_finish_abort(struct se_cmd *cmd, int remove)
 {
 	bool ack_kref = (cmd->se_cmd_flags & SCF_ACK_KREF);
+	int ret = 0;
 
 	if (cmd->se_cmd_flags & SCF_SE_LUN_CMD)
 		transport_lun_remove_cmd(cmd);
@@ -618,9 +619,11 @@ void transport_cmd_finish_abort(struct s
 		cmd->se_tfo->aborted_task(cmd);
 
 	if (transport_cmd_check_stop_to_fabric(cmd))
-		return;
+		return 1;
 	if (remove && ack_kref)
-		transport_put_cmd(cmd);
+		ret = transport_put_cmd(cmd);
+
+	return ret;
 }
 
 static void target_complete_failure_work(struct work_struct *work)

[PATCH 3.18 11/16] of: Add check to of_scan_flat_dt() before accessing initial_boot_params

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tobias Wolf <dev-NTEO@vplace.de>

commit 3ec754410cb3e931a6c4920b1a150f21a94a2bf4 upstream.

An empty __dtb_start to __dtb_end section might result in
initial_boot_params being null for arch/mips/ralink. This showed that the
boot process hangs indefinitely in of_scan_flat_dt().

Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14605/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/of/fdt.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -585,9 +585,12 @@ int __init of_scan_flat_dt(int (*it)(uns
 	const char *pathp;
 	int offset, rc = 0, depth = -1;
 
-        for (offset = fdt_next_node(blob, -1, &depth);
-             offset >= 0 && depth >= 0 && !rc;
-             offset = fdt_next_node(blob, offset, &depth)) {
+	if (!blob)
+		return 0;
+
+	for (offset = fdt_next_node(blob, -1, &depth);
+	     offset >= 0 && depth >= 0 && !rc;
+	     offset = fdt_next_node(blob, offset, &depth)) {
 
 		pathp = fdt_get_name(blob, offset, NULL);
 		if (*pathp == '/')

[PATCH 3.18 13/16] powerpc/slb: Force a full SLB flush when we insert for a bad EA

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Ellerman <mpe@ellerman.id.au>

[Note this patch is not upstream. The bug fix was fixed differently in
upstream prior to the bug being identified.]

The SLB miss handler calls slb_allocate_realmode() in order to create an
SLB entry for the faulting address. At the very start of that function
we check that the faulting Effective Address (EA) is less than
PGTABLE_RANGE (ignoring the region), ie. is it an address which could
possibly fit in the virtual address space.

For an EA which fails that test, we branch out of line (to label 8), but
we still go on to create an SLB entry for the address. The SLB entry we
create has a VSID of 0, which means it will never match anything in the
hash table and so can't actually translate to a physical address.

However that SLB entry will be inserted in the SLB, and so needs to be
managed properly like any other SLB entry. In particular we need to
insert the SLB entry in the SLB cache, so that it will be flushed when
the process is descheduled.

And that is where the bugs begin. The first bug is that slb_finish_load()
uses cr7 to decide if it should insert the SLB entry into the SLB cache.
When we come from the invalid EA case we don't set cr7, it just has some
junk value from userspace. So we may or may not insert the SLB entry in
the SLB cache. If we fail to insert it, we may then incorrectly leave it
in the SLB when the process is descheduled.

The second bug is that even if we do happen to add the entry to the SLB
cache, we do not have enough bits in the SLB cache to remember the full
ESID value for very large EAs.

For example if a process branches to 0x788c545a18000000, that results in
a 256MB SLB entry with an ESID of 0x788c545a1. But each entry in the SLB
cache is only 32-bits, meaning we truncate the ESID to 0x88c545a1. This
has the same effect as the first bug, we incorrectly leave the SLB entry
in the SLB when the process is descheduled.

When a process accesses an invalid EA it results in a SEGV signal being
sent to the process, which typically results in the process being
killed. Process death isn't instantaneous however, the process may catch
the SEGV signal and continue somehow, or the kernel may start writing a
core dump for the process, either of which means it's possible for the
process to be preempted while its processing the SEGV but before it's
been killed.

If that happens, when the process is scheduled back onto the CPU we will
allocate a new SLB entry for the NIP, which will insert a second entry
into the SLB for the bad EA. Because we never flushed the original
entry, due to either bug one or two, we now have two SLB entries that
match the same EA.

If another access is made to that EA, either by the process continuing
after catching the SEGV, or by a second process accessing the same bad
EA on the same CPU, we will trigger an SLB multi-hit machine check
exception. This has been observed happening in the wild.

The fix is when we hit the invalid EA case, we mark the SLB cache as
being full. This causes us to not insert the truncated ESID into the SLB
cache, and means when the process is switched out we will flush the
entire SLB. Note that this works both for the original fault and for a
subsequent call to slb_allocate_realmode() from switch_slb().

Because we mark the SLB cache as full, it doesn't really matter what
value is in cr7, but rather than leaving it as something random we set
it to indicate the address was a kernel address. That also skips the
attempt to insert it in the SLB cache which is a nice side effect.

Another way to fix the bug would be to make the entries in the SLB cache
wider, so that we don't truncate the ESID. However this would be a more
intrusive change as it alters the size and layout of the paca.

This bug was fixed in upstream by commit f0f558b131db ("powerpc/mm:
Preserve CFAR value on SLB miss caused by access to bogus address"),
which changed the way we handle a bad EA entirely removing this bug in
the process.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/mm/slb_low.S |   10 ++++++++++
 1 file changed, 10 insertions(+)

Note this patch is not upstream. The bug fix was fixed differently in
upstream prior to the bug being identified.

--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -179,6 +179,16 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEG
 	b	slb_finish_load
 
 8:	/* invalid EA */
+	/*
+	 * It's possible the bad EA is too large to fit in the SLB cache, which
+	 * would mean we'd fail to invalidate it on context switch. So mark the
+	 * SLB cache as full so we force a full flush. We also set cr7+eq to
+	 * mark the address as a kernel address, so slb_finish_load() skips
+	 * trying to insert it into the SLB cache.
+	 */
+	li	r9,SLB_CACHE_ENTRIES + 1
+	sth	r9,PACASLBCACHEPTR(r13)
+	crset	4*cr7+eq
 	li	r10,0			/* BAD_VSID */
 	li	r9,0			/* BAD_VSID */
 	li	r11,SLB_VSID_USER	/* flags don't much matter */

[PATCH 3.18 14/16] usb: gadget: f_fs: avoid out of bounds access on comp_desc

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: William Wu <william.wu@rock-chips.com>

commit b7f73850bb4fac1e2209a4dd5e636d39be92f42c upstream.

Companion descriptor is only used for SuperSpeed endpoints,
if the endpoints are HighSpeed or FullSpeed, the Companion
descriptor will not allocated, so we can only access it if
gadget is SuperSpeed.

I can reproduce this issue on Rockchip platform rk3368 SoC
which supports USB 2.0, and use functionfs for ADB. Kernel
build with CONFIG_KASAN=y and CONFIG_SLUB_DEBUG=y report
the following BUG:

==================================================================
BUG: KASAN: slab-out-of-bounds in ffs_func_set_alt+0x224/0x3a0 at addr ffffffc0601f6509
Read of size 1 by task swapper/0/0
============================================================================
BUG kmalloc-256 (Not tainted): kasan: bad access detected
----------------------------------------------------------------------------

Disabling lock debugging due to kernel taint
INFO: Allocated in ffs_func_bind+0x52c/0x99c age=1275 cpu=0 pid=1
alloc_debug_processing+0x128/0x17c
___slab_alloc.constprop.58+0x50c/0x610
__slab_alloc.isra.55.constprop.57+0x24/0x34
__kmalloc+0xe0/0x250
ffs_func_bind+0x52c/0x99c
usb_add_function+0xd8/0x1d4
configfs_composite_bind+0x48c/0x570
udc_bind_to_driver+0x6c/0x170
usb_udc_attach_driver+0xa4/0xd0
gadget_dev_desc_UDC_store+0xcc/0x118
configfs_write_file+0x1a0/0x1f8
__vfs_write+0x64/0x174
vfs_write+0xe4/0x200
SyS_write+0x68/0xc8
el0_svc_naked+0x24/0x28
INFO: Freed in inode_doinit_with_dentry+0x3f0/0x7c4 age=1275 cpu=7 pid=247
...
Call trace:
[<ffffff900808aab4>] dump_backtrace+0x0/0x230
[<ffffff900808acf8>] show_stack+0x14/0x1c
[<ffffff90084ad420>] dump_stack+0xa0/0xc8
[<ffffff90082157cc>] print_trailer+0x188/0x198
[<ffffff9008215948>] object_err+0x3c/0x4c
[<ffffff900821b5ac>] kasan_report+0x324/0x4dc
[<ffffff900821aa38>] __asan_load1+0x24/0x50
[<ffffff90089eb750>] ffs_func_set_alt+0x224/0x3a0
[<ffffff90089d3760>] composite_setup+0xdcc/0x1ac8
[<ffffff90089d7394>] android_setup+0x124/0x1a0
[<ffffff90089acd18>] _setup+0x54/0x74
[<ffffff90089b6b98>] handle_ep0+0x3288/0x4390
[<ffffff90089b9b44>] dwc_otg_pcd_handle_out_ep_intr+0x14dc/0x2ae4
[<ffffff90089be85c>] dwc_otg_pcd_handle_intr+0x1ec/0x298
[<ffffff90089ad680>] dwc_otg_pcd_irq+0x10/0x20
[<ffffff9008116328>] handle_irq_event_percpu+0x124/0x3ac
[<ffffff9008116610>] handle_irq_event+0x60/0xa0
[<ffffff900811af30>] handle_fasteoi_irq+0x10c/0x1d4
[<ffffff9008115568>] generic_handle_irq+0x30/0x40
[<ffffff90081159b4>] __handle_domain_irq+0xac/0xdc
[<ffffff9008080e9c>] gic_handle_irq+0x64/0xa4
...
Memory state around the buggy address:
  ffffffc0601f6400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  ffffffc0601f6480: 00 00 00 00 00 00 00 00 00 00 06 fc fc fc fc fc
 >ffffffc0601f6500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                       ^
  ffffffc0601f6580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  ffffffc0601f6600: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
==================================================================

Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Jerry Zhang <zhangjerry@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/function/f_fs.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -1674,12 +1674,12 @@ static int ffs_func_eps_enable(struct ff
 		ep->ep->driver_data = ep;
 		ep->ep->desc = ds;
 
-		comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds +
-				USB_DT_ENDPOINT_SIZE);
-		ep->ep->maxburst = comp_desc->bMaxBurst + 1;
-
-		if (needs_comp_desc)
+		if (needs_comp_desc) {
+			comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds +
+					USB_DT_ENDPOINT_SIZE);
+			ep->ep->maxburst = comp_desc->bMaxBurst + 1;
 			ep->ep->comp_desc = comp_desc;
+		}
 
 		ret = usb_ep_enable(ep->ep);
 		if (likely(!ret)) {

[PATCH 3.18 15/16] net: phy: fix marvell phy status reading

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Russell King <rmk+kernel@armlinux.org.uk>

commit 898805e0cdf7fd860ec21bf661d3a0285a3defbd upstream.

The Marvell driver incorrectly provides phydev->lp_advertising as the
logical and of the link partner's advert and our advert.  This is
incorrect - this field is supposed to store the link parter's unmodified
advertisment.

This allows ethtool to report the correct link partner auto-negotiation
status.

Fixes: be937f1f89ca ("Marvell PHY m88e1111 driver fix")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/phy/marvell.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -737,8 +737,6 @@ static int marvell_read_status(struct ph
 		if (adv < 0)
 			return adv;
 
-		lpa &= adv;
-
 		if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
 			phydev->duplex = DUPLEX_FULL;
 		else

[PATCH 3.18 16/16] mac80211/wpa: use constant time memory comparison for MACs

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason A. Donenfeld <Jason@zx2c4.com>

commit 98c67d187db7808b1f3c95f2110dd4392d034182 upstream.

Otherwise, we enable all sorts of forgeries via timing attack.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 net/mac80211/wpa.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/net/mac80211/wpa.c
+++ b/net/mac80211/wpa.c
@@ -16,6 +16,7 @@
 #include <asm/unaligned.h>
 #include <net/mac80211.h>
 #include <crypto/aes.h>
+#include <crypto/algapi.h>
 
 #include "ieee80211_i.h"
 #include "michael.h"
@@ -150,7 +151,7 @@ ieee80211_rx_h_michael_mic_verify(struct
 	data_len = skb->len - hdrlen - MICHAEL_MIC_LEN;
 	key = &rx->key->conf.key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY];
 	michael_mic(key, hdr, data, data_len, mic);
-	if (memcmp(mic, data + data_len, MICHAEL_MIC_LEN) != 0)
+	if (crypto_memneq(mic, data + data_len, MICHAEL_MIC_LEN))
 		goto mic_fail;
 
 	/* remove Michael MIC from payload */
@@ -771,7 +772,7 @@ ieee80211_crypto_aes_cmac_decrypt(struct
 		bip_aad(skb, aad);
 		ieee80211_aes_cmac(key->u.aes_cmac.tfm, aad,
 				   skb->data + 24, skb->len - 24, mic);
-		if (memcmp(mic, mmie->mic, sizeof(mmie->mic)) != 0) {
+		if (crypto_memneq(mic, mmie->mic, sizeof(mmie->mic))) {
 			key->u.aes_cmac.icverrors++;
 			return RX_DROP_UNUSABLE;
 		}

Re: [PATCH 3.18 00/16] 3.18.59-stable review

[Guenter Roeck]

On Tue, Jun 27, 2017 at 02:49:37PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.59 release.
> There are 16 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Jun 29 12:44:17 UTC 2017.
> Anything received after that time might be too late.
> 

Build results:
	total: 136 pass: 136 fail: 0
Qemu test results:
	total: 111 pass: 111 fail: 0

Details are available at http://kerneltests.org/builders.

Guenter

Re: [PATCH 3.18 00/16] 3.18.59-stable review

[Shuah Khan]

On 06/27/2017 06:49 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.59 release.
> There are 16 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Jun 29 12:44:17 UTC 2017.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v3.x/stable-review/patch-3.18.59-rc1.gz
> or in the git tree and branch at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-3.18.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah