[PATCH 4.9 00/67] 4.9.91-stable review

[PATCH 4.9 00/67] 4.9.91-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.9.91 release.
There are 67 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu Mar 29 16:27:08 UTC 2018.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.91-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.9.91-rc1

Daniel Borkmann <daniel@iogearbox.net>
    bpf, x64: increase number of passes

Chenbo Feng <fengc@google.com>
    bpf: skip unnecessary capability check

Daniel Borkmann <daniel@iogearbox.net>
    kbuild: disable clang's default use of -fmerge-all-constants

Shuah Khan <shuah@kernel.org>
    selftests: x86: sysret_ss_attrs doesn't build on a PIE build

Dave Hansen <dave.hansen@linux.intel.com>
    x86/pkeys/selftests: Rename 'si_pkey' to 'siginfo_pkey'

Eric W. Biederman <ebiederm@xmission.com>
    signal/testing: Don't look for __SI_FAULT in userspace

Andy Lutomirski <luto@kernel.org>
    selftests/x86/protection_keys: Fix syscall NR redefinition warnings

Dave Hansen <dave.hansen@linux.intel.com>
    selftests, x86, protection_keys: fix wrong offset in siginfo

Nadav Amit <namit@vmware.com>
    staging: lustre: ptlrpc: kfree used instead of kvfree

Linus Walleij <linus.walleij@linaro.org>
    iio: ABI: Fix name of timestamp sysfs file

Kan Liang <kan.liang@linux.intel.com>
    perf/x86/intel/uncore: Fix multi-domain PCI CHA enumeration bug on Skylake servers

Dan Carpenter <dan.carpenter@oracle.com>
    perf/x86/intel: Don't accidentally clear high bits in bdw_limit_period()

Ilya Pronin <ipronin@twitter.com>
    perf stat: Fix CVS output format for non-supported counters

Kan Liang <kan.liang@linux.intel.com>
    perf/x86/intel/uncore: Fix Skylake UPI event format

Andy Lutomirski <luto@kernel.org>
    x86/entry/64: Don't use IST entry for #BP stack

H.J. Lu <hjl.tools@gmail.com>
    x86/boot/64: Verify alignment of the LOAD segment

H.J. Lu <hjl.tools@gmail.com>
    x86/build/64: Force the linker to use 2MB page size

Linus Torvalds <torvalds@linux-foundation.org>
    kvm/x86: fix icebp instruction handling

Andy Lutomirski <luto@kernel.org>
    selftests/x86/ptrace_syscall: Fix for yet more glibc interference

Linus Torvalds <torvalds@linux-foundation.org>
    tty: vt: fix up tabstops properly

Andri Yngvason <andri.yngvason@marel.com>
    can: cc770: Fix use after free in cc770_tx_interrupt()

Andri Yngvason <andri.yngvason@marel.com>
    can: cc770: Fix queue stall & dropped RTR reply

Andri Yngvason <andri.yngvason@marel.com>
    can: cc770: Fix stalls on rt-linux, remove redundant IRQ ack

Marek Vasut <marex@denx.de>
    can: ifi: Check core revision upon probe

Marek Vasut <marex@denx.de>
    can: ifi: Repair the error handling

Dan Carpenter <dan.carpenter@oracle.com>
    staging: ncpfs: memory corruption in ncp_read_kernel()

Jagdish Gediya <jagdish.gediya@nxp.com>
    mtd: nand: fsl_ifc: Read ECCSTAT0 and ECCSTAT1 registers for IFC 2.0

Jagdish Gediya <jagdish.gediya@nxp.com>
    mtd: nand: fsl_ifc: Fix eccstat array overflow for IFC ver >= 2.0.0

Jagdish Gediya <jagdish.gediya@nxp.com>
    mtd: nand: fsl_ifc: Fix nand waitfunc return value

OuYang ZhiZhong <ouyzz@yealink.com>
    mtdchar: fix usage of mtd_ooblayout_ecc()

Masami Hiramatsu <mhiramat@kernel.org>
    tracing: probeevent: Fix to support minus offset from symbol

Larry Finger <Larry.Finger@lwfinger.net>
    rtlwifi: rtl8723be: Fix loss of signal

Arend Van Spriel <arend.vanspriel@broadcom.com>
    brcmfmac: fix P2P_DEVICE ethernet address generation

Vishal Verma <vishal.l.verma@intel.com>
    libnvdimm, {btt, blk}: do integrity setup before add_disk()

Takashi Iwai <tiwai@suse.de>
    ACPI / watchdog: Fix off-by-one error at resource assignment

Dan Williams <dan.j.williams@intel.com>
    acpi, numa: fix pxm to online numa node associations

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    drm: udl: Properly check framebuffer mmap offsets

Michel Dänzer <michel.daenzer@amd.com>
    drm/radeon: Don't turn off DP sink when disconnected

Thomas Hellstrom <thellstrom@vmware.com>
    drm/vmwgfx: Fix a destoy-while-held mutex problem.

Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
    mm/shmem: do not wait for lock_page() in shmem_unused_huge_shrink()

Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
    mm/thp: do not wait for lock_page() in deferred_split_scan()

Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
    mm/khugepaged.c: convert VM_BUG_ON() to collapse fail

Toshi Kani <toshi.kani@hpe.com>
    x86/mm: implement free pmd/pte page interfaces

Toshi Kani <toshi.kani@hpe.com>
    mm/vmalloc: add interfaces to free unmapped page table

Jeff Layton <jlayton@redhat.com>
    nfsd: remove blocked locks on client teardown

Hans de Goede <hdegoede@redhat.com>
    libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version

Hans de Goede <hdegoede@redhat.com>
    libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions

Hans de Goede <hdegoede@redhat.com>
    libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs

Ju Hyung Park <qkrwngud825@gmail.com>
    libata: Enable queued TRIM for Samsung SSD 860

Kai-Heng Feng <kai.heng.feng@canonical.com>
    libata: disable LPM for Crucial BX100 SSD 500GB drive

Hans de Goede <hdegoede@redhat.com>
    libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs

Eric Biggers <ebiggers@google.com>
    libata: don't try to pass through NCQ commands to non-NCQ devices

Eric Biggers <ebiggers@google.com>
    libata: remove WARN() for DMA or PIO command without data

Eric Biggers <ebiggers@google.com>
    libata: fix length validation of ATAPI-relayed SCSI commands

Takashi Iwai <tiwai@suse.de>
    Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174

Chen-Yu Tsai <wens@csie.org>
    clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops

Boris Brezillon <boris.brezillon@bootlin.com>
    clk: bcm2835: Protect sections updating shared registers

Boris Brezillon <boris.brezillon@bootlin.com>
    clk: bcm2835: Fix ana->maskX definitions

Hans de Goede <hdegoede@redhat.com>
    ahci: Add PCI-id for the Highpoint Rocketraid 644L card

Hans de Goede <hdegoede@redhat.com>
    PCI: Add function 1 DMA alias quirk for Highpoint RocketRAID 644L

Evgeniy Didin <Evgeniy.Didin@synopsys.com>
    mmc: dw_mmc: fix falling from idmac to PIO mode when dw_mci_reset occurs

Takashi Iwai <tiwai@suse.de>
    ALSA: hda/realtek - Always immediately update mute LED with pin VREF

Takashi Iwai <tiwai@suse.de>
    ALSA: aloop: Fix access to not-yet-ready substream via cable

Takashi Iwai <tiwai@suse.de>
    ALSA: aloop: Sync stale timer before release

Kirill Marinushkin <k.marinushkin@gmail.com>
    ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit

Michael Nosthoff <committed@heine.so>
    iio: st_pressure: st_accel: pass correct platform data to init

NeilBrown <neil@brown.name>
    MIPS: ralink: Remove ralink_halt()


-------------

Diffstat:

 Documentation/ABI/testing/sysfs-bus-iio            |   2 +-
 Makefile                                           |  13 ++-
 arch/arm64/mm/mmu.c                                |  10 +++
 arch/mips/ralink/reset.c                           |   7 --
 arch/x86/Makefile                                  |   9 ++
 arch/x86/boot/compressed/misc.c                    |   4 +
 arch/x86/entry/entry_64.S                          |   2 +-
 arch/x86/events/intel/core.c                       |   2 +-
 arch/x86/events/intel/uncore_snbep.c               |  33 +++----
 arch/x86/include/asm/vmx.h                         |   1 +
 arch/x86/kernel/traps.c                            |  24 +++--
 arch/x86/kvm/vmx.c                                 |   9 +-
 arch/x86/mm/pgtable.c                              |  48 ++++++++++
 arch/x86/net/bpf_jit_comp.c                        |   3 +-
 drivers/acpi/acpi_watchdog.c                       |   4 +-
 drivers/acpi/numa.c                                |  10 ++-
 drivers/ata/ahci.c                                 |   4 +-
 drivers/ata/libata-core.c                          |  26 +++++-
 drivers/ata/libata-scsi.c                          |  10 ++-
 drivers/bluetooth/btusb.c                          |   2 +-
 drivers/clk/bcm/clk-bcm2835.c                      |  12 ++-
 drivers/clk/sunxi-ng/ccu-sun6i-a31.c               |   6 +-
 drivers/gpu/drm/radeon/radeon_connectors.c         |  31 +++----
 drivers/gpu/drm/udl/udl_fb.c                       |   9 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c                |  28 ++++--
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.h                |  12 ++-
 drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c               |   5 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c               |   5 +-
 drivers/iio/accel/st_accel_core.c                  |   2 +-
 drivers/iio/pressure/st_pressure_core.c            |   2 +-
 drivers/mmc/host/dw_mmc.c                          |   6 +-
 drivers/mtd/mtdchar.c                              |   4 +-
 drivers/mtd/nand/fsl_ifc_nand.c                    |  32 +++----
 drivers/net/can/cc770/cc770.c                      | 100 +++++++++++++--------
 drivers/net/can/cc770/cc770.h                      |   2 +
 drivers/net/can/ifi_canfd/ifi_canfd.c              |  75 ++++++++++------
 .../net/wireless/broadcom/brcm80211/brcmfmac/p2p.c |  24 +++--
 .../net/wireless/realtek/rtlwifi/rtl8723be/hw.c    |   3 +-
 drivers/nvdimm/blk.c                               |   3 +-
 drivers/nvdimm/btt.c                               |   3 +-
 drivers/pci/quirks.c                               |   2 +
 drivers/staging/lustre/lustre/ptlrpc/sec.c         |   2 +-
 drivers/tty/vt/vt.c                                |   8 +-
 drivers/watchdog/wdat_wdt.c                        |   2 +-
 fs/ncpfs/ncplib_kernel.c                           |   4 +
 fs/nfsd/nfs4state.c                                |  62 +++++++++----
 include/asm-generic/pgtable.h                      |  10 +++
 include/linux/fsl_ifc.h                            |   6 +-
 include/uapi/linux/usb/audio.h                     |   4 +-
 kernel/bpf/syscall.c                               |   2 +-
 kernel/trace/trace_kprobe.c                        |   4 +-
 kernel/trace/trace_probe.c                         |   8 +-
 kernel/trace/trace_probe.h                         |   2 +-
 lib/ioremap.c                                      |   6 +-
 mm/huge_memory.c                                   |   4 +-
 mm/khugepaged.c                                    |   7 +-
 mm/shmem.c                                         |  31 ++++---
 sound/drivers/aloop.c                              |  17 +++-
 sound/pci/hda/patch_realtek.c                      |   6 +-
 tools/perf/builtin-stat.c                          |   2 +-
 tools/testing/selftests/x86/Makefile               |   2 +-
 tools/testing/selftests/x86/mpx-mini-test.c        |   3 +-
 tools/testing/selftests/x86/protection_keys.c      |  49 ++++++----
 tools/testing/selftests/x86/ptrace_syscall.c       |   8 +-
 64 files changed, 546 insertions(+), 292 deletions(-)

[PATCH 4.9 01/67] MIPS: ralink: Remove ralink_halt()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: NeilBrown <neil@brown.name>

commit 891731f6a5dbe508d12443175a7e166a2fba616a upstream.

ralink_halt() does nothing that machine_halt() doesn't already do, so it
adds no value.

It actually causes incorrect behaviour due to the "unreachable()" at the
end. This tells the compiler that the end of the function will never be
reached, which isn't true. The compiler responds by not adding a
'return' instruction, so control simply moves on to whatever bytes come
afterwards in memory. In my tested, that was the ralink_restart()
function. This means that an attempt to 'halt' the machine would
actually cause a reboot.

So remove ralink_halt() so that a 'halt' really does halt.

Fixes: c06e836ada59 ("MIPS: ralink: adds reset code")
Signed-off-by: NeilBrown <neil@brown.name>
Cc: John Crispin <john@phrozen.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.9+
Patchwork: https://patchwork.linux-mips.org/patch/18851/
Signed-off-by: James Hogan <jhogan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/ralink/reset.c |    7 -------
 1 file changed, 7 deletions(-)

--- a/arch/mips/ralink/reset.c
+++ b/arch/mips/ralink/reset.c
@@ -96,16 +96,9 @@ static void ralink_restart(char *command
 	unreachable();
 }
 
-static void ralink_halt(void)
-{
-	local_irq_disable();
-	unreachable();
-}
-
 static int __init mips_reboot_setup(void)
 {
 	_machine_restart = ralink_restart;
-	_machine_halt = ralink_halt;
 
 	return 0;
 }

[PATCH 4.9 02/67] iio: st_pressure: st_accel: pass correct platform data to init

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Nosthoff <committed@heine.so>

commit 8b438686a001db64c21782d04ef68111e53c45d9 upstream.

Commit 7383d44b added a pointer pdata which get set to the default
platform_data when non was defined in the device. But it did not
pass this pointer to the st_sensors_init_sensor call but still
used the maybe uninitialized platform_data from dev.

This breaks initialization when no platform_data is given and
the optional st,drdy-int-pin devicetree option is not set.

This commit fixes this.

Cc: stable@vger.kernel.org
Fixes: 7383d44b ("iio: st_pressure: st_accel: Initialise sensor platform data properly")
Signed-off-by: Michael Nosthoff <committed@heine.so>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/accel/st_accel_core.c       |    2 +-
 drivers/iio/pressure/st_pressure_core.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -858,7 +858,7 @@ int st_accel_common_probe(struct iio_dev
 	if (!pdata)
 		pdata = (struct st_sensors_platform_data *)&default_accel_pdata;
 
-	err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data);
+	err = st_sensors_init_sensor(indio_dev, pdata);
 	if (err < 0)
 		goto st_accel_power_off;
 
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -678,7 +678,7 @@ int st_press_common_probe(struct iio_dev
 	if (!pdata && press_data->sensor_settings->drdy_irq.addr)
 		pdata =	(struct st_sensors_platform_data *)&default_press_pdata;
 
-	err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data);
+	err = st_sensors_init_sensor(indio_dev, pdata);
 	if (err < 0)
 		goto st_press_power_off;
 

[PATCH 4.9 03/67] ALSA: usb-audio: Fix parsing descriptor of UAC2 processing unit

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kirill Marinushkin <k.marinushkin@gmail.com>

commit a6618f4aedb2b60932d766bd82ae7ce866e842aa upstream.

Currently, the offsets in the UAC2 processing unit descriptor are
calculated incorrectly. It causes an issue when connecting the device which
provides such a feature:

~~~~
[84126.724420] usb 1-1.3.1: invalid Processing Unit descriptor (id 18)
~~~~

After this patch is applied, the UAC2 processing unit inits w/o this error.

Fixes: 23caaf19b11e ("ALSA: usb-mixer: Add support for Audio Class v2.0")
Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/uapi/linux/usb/audio.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/include/uapi/linux/usb/audio.h
+++ b/include/uapi/linux/usb/audio.h
@@ -369,7 +369,7 @@ static inline __u8 uac_processing_unit_b
 {
 	return (protocol == UAC_VERSION_1) ?
 		desc->baSourceID[desc->bNrInPins + 4] :
-		desc->baSourceID[desc->bNrInPins + 6];
+		2; /* in UAC2, this value is constant */
 }
 
 static inline __u8 *uac_processing_unit_bmControls(struct uac_processing_unit_descriptor *desc,
@@ -377,7 +377,7 @@ static inline __u8 *uac_processing_unit_
 {
 	return (protocol == UAC_VERSION_1) ?
 		&desc->baSourceID[desc->bNrInPins + 5] :
-		&desc->baSourceID[desc->bNrInPins + 7];
+		&desc->baSourceID[desc->bNrInPins + 6];
 }
 
 static inline __u8 uac_processing_unit_iProcessing(struct uac_processing_unit_descriptor *desc,

[PATCH 4.9 04/67] ALSA: aloop: Sync stale timer before release

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 67a01afaf3d34893cf7d2ea19b34555d6abb7cb0 upstream.

The aloop driver tries to stop the pending timer via timer_del() in
the trigger callback and in the close callback.  The former is
correct, as it's an atomic operation, while the latter expects that
the timer gets really removed and proceeds the resource releases after
that.  But timer_del() doesn't synchronize, hence the running timer
may still access the released resources.

A similar situation can be also seen in the prepare callback after
trigger(STOP) where the prepare tries to re-initialize the things
while a timer is still running.

The problems like the above are seen indirectly in some syzkaller
reports (although it's not 100% clear whether this is the only cause,
as the race condition is quite narrow and not always easy to
trigger).

For addressing these issues, this patch adds the explicit alls of
timer_del_sync() in some places, so that the pending timer is properly
killed / synced.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/drivers/aloop.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/sound/drivers/aloop.c
+++ b/sound/drivers/aloop.c
@@ -192,6 +192,11 @@ static inline void loopback_timer_stop(s
 	dpcm->timer.expires = 0;
 }
 
+static inline void loopback_timer_stop_sync(struct loopback_pcm *dpcm)
+{
+	del_timer_sync(&dpcm->timer);
+}
+
 #define CABLE_VALID_PLAYBACK	(1 << SNDRV_PCM_STREAM_PLAYBACK)
 #define CABLE_VALID_CAPTURE	(1 << SNDRV_PCM_STREAM_CAPTURE)
 #define CABLE_VALID_BOTH	(CABLE_VALID_PLAYBACK|CABLE_VALID_CAPTURE)
@@ -326,6 +331,8 @@ static int loopback_prepare(struct snd_p
 	struct loopback_cable *cable = dpcm->cable;
 	int bps, salign;
 
+	loopback_timer_stop_sync(dpcm);
+
 	salign = (snd_pcm_format_width(runtime->format) *
 						runtime->channels) / 8;
 	bps = salign * runtime->rate;
@@ -745,7 +752,7 @@ static int loopback_close(struct snd_pcm
 	struct loopback *loopback = substream->private_data;
 	struct loopback_pcm *dpcm = substream->runtime->private_data;
 
-	loopback_timer_stop(dpcm);
+	loopback_timer_stop_sync(dpcm);
 	mutex_lock(&loopback->cable_lock);
 	free_cable(substream);
 	mutex_unlock(&loopback->cable_lock);

[PATCH 4.9 05/67] ALSA: aloop: Fix access to not-yet-ready substream via cable

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 8e6b1a72a75bb5067ccb6b56d8ca4aa3a300a64e upstream.

In loopback_open() and loopback_close(), we assign and release the
substream object to the corresponding cable in a racy way.  It's
neither locked nor done in the right position.  The open callback
assigns the substream before its preparation finishes, hence the other
side of the cable may pick it up, which may lead to the invalid memory
access.

This patch addresses these: move the assignment to the end of the open
callback, and wrap with cable->lock for avoiding concurrent accesses.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/drivers/aloop.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/sound/drivers/aloop.c
+++ b/sound/drivers/aloop.c
@@ -666,7 +666,9 @@ static void free_cable(struct snd_pcm_su
 		return;
 	if (cable->streams[!substream->stream]) {
 		/* other stream is still alive */
+		spin_lock_irq(&cable->lock);
 		cable->streams[substream->stream] = NULL;
+		spin_unlock_irq(&cable->lock);
 	} else {
 		/* free the cable */
 		loopback->cables[substream->number][dev] = NULL;
@@ -706,7 +708,6 @@ static int loopback_open(struct snd_pcm_
 		loopback->cables[substream->number][dev] = cable;
 	}
 	dpcm->cable = cable;
-	cable->streams[substream->stream] = dpcm;
 
 	snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
 
@@ -738,6 +739,11 @@ static int loopback_open(struct snd_pcm_
 		runtime->hw = loopback_pcm_hardware;
 	else
 		runtime->hw = cable->hw;
+
+	spin_lock_irq(&cable->lock);
+	cable->streams[substream->stream] = dpcm;
+	spin_unlock_irq(&cable->lock);
+
  unlock:
 	if (err < 0) {
 		free_cable(substream);

[PATCH 4.9 06/67] ALSA: hda/realtek - Always immediately update mute LED with pin VREF

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit e40bdb03d3cd7da66bd0bc1e40cbcfb49351265c upstream.

Some HP laptops have a mute mute LED controlled by a pin VREF.  The
Realtek codec driver updates the VREF via vmaster hook by calling
snd_hda_set_pin_ctl_cache().

This works fine as long as the driver is running in a normal mode.
However, when the VREF change happens during the codec being in
runtime PM suspend, the regmap access will skip and postpone the
actual register change.  This ends up with the unchanged LED status
until the next runtime PM resume even if you change the Master mute
switch.  (Interestingly, the machine keeps the LED status even after
the codec goes into D3 -- but it's another story.)

For improving this usability, let the driver temporarily powering up /
down only during the pin VREF change.  This can be achieved easily by
wrapping the call with snd_hda_power_up_pm() / *_down_pm().

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199073
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_realtek.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3261,8 +3261,12 @@ static void alc269_fixup_mic_mute_hook(v
 	pinval = snd_hda_codec_get_pin_target(codec, spec->mute_led_nid);
 	pinval &= ~AC_PINCTL_VREFEN;
 	pinval |= enabled ? AC_PINCTL_VREF_HIZ : AC_PINCTL_VREF_80;
-	if (spec->mute_led_nid)
+	if (spec->mute_led_nid) {
+		/* temporarily power up/down for setting VREF */
+		snd_hda_power_up_pm(codec);
 		snd_hda_set_pin_ctl_cache(codec, spec->mute_led_nid, pinval);
+		snd_hda_power_down_pm(codec);
+	}
 }
 
 /* Make sure the led works even in runtime suspend */

[PATCH 4.9 07/67] mmc: dw_mmc: fix falling from idmac to PIO mode when dw_mci_reset occurs

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Evgeniy Didin <Evgeniy.Didin@synopsys.com>

commit 47b7de2f6c18f75d1f2716efe752cba43f32a626 upstream.

It was found that in IDMAC mode after soft-reset driver switches
to PIO mode.

That's what happens in case of DTO timeout overflow calculation failure:
1. soft-reset is called
2. driver restarts dma
3. descriptors states are checked, one of descriptor is owned by the IDMAC.
4. driver can't use DMA and then switches to PIO mode.

Failure was already fixed in:
https://www.spinics.net/lists/linux-mmc/msg48125.html.

Behaviour while soft-reset is not something we except or
even want to happen. So we switch from dw_mci_idmac_reset
to dw_mci_idmac_init, so descriptors are cleaned before starting dma.

And while at it explicitly zero des0 which otherwise might
contain garbage as being allocated by dmam_alloc_coherent().

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/dw_mmc.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -490,6 +490,7 @@ static int dw_mci_idmac_init(struct dw_m
 					(sizeof(struct idmac_desc_64addr) *
 							(i + 1))) >> 32;
 			/* Initialize reserved and buffer size fields to "0" */
+			p->des0 = 0;
 			p->des1 = 0;
 			p->des2 = 0;
 			p->des3 = 0;
@@ -512,6 +513,7 @@ static int dw_mci_idmac_init(struct dw_m
 		     i++, p++) {
 			p->des3 = cpu_to_le32(host->sg_dma +
 					(sizeof(struct idmac_desc) * (i + 1)));
+			p->des0 = 0;
 			p->des1 = 0;
 		}
 
@@ -2878,8 +2880,8 @@ static bool dw_mci_reset(struct dw_mci *
 	}
 
 	if (host->use_dma == TRANS_MODE_IDMAC)
-		/* It is also recommended that we reset and reprogram idmac */
-		dw_mci_idmac_reset(host);
+		/* It is also required that we reinit idmac */
+		dw_mci_idmac_init(host);
 
 	ret = true;
 

[PATCH 4.9 08/67] PCI: Add function 1 DMA alias quirk for Highpoint RocketRAID 644L

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 1903be8222b7c278ca897c129ce477c1dd6403a8 upstream.

The Highpoint RocketRAID 644L uses a Marvel 88SE9235 controller, as with
other Marvel controllers this needs a function 1 DMA alias quirk.

Note the RocketRAID 642L uses the same Marvel 88SE9235 controller and
already is listed with a function 1 DMA alias quirk.

Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1534106
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/quirks.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3877,6 +3877,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_M
 			 quirk_dma_func1_alias);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TTI, 0x0642,
 			 quirk_dma_func1_alias);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TTI, 0x0645,
+			 quirk_dma_func1_alias);
 /* https://bugs.gentoo.org/show_bug.cgi?id=497630 */
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_JMICRON,
 			 PCI_DEVICE_ID_JMICRON_JMB388_ESD,

[PATCH 4.9 09/67] ahci: Add PCI-id for the Highpoint Rocketraid 644L card

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 28b2182dad43f6f8fcbd167539a26714fd12bd64 upstream.

Like the Highpoint Rocketraid 642L and cards using a Marvel 88SE9235
controller in general, this RAID card also supports AHCI mode and short
of a custom driver, this is the only way to make it work under Linux.

Note that even though the card is called to 644L, it has a product-id
of 0x0645.

Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1534106
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/ahci.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -539,7 +539,9 @@ static const struct pci_device_id ahci_p
 	  .driver_data = board_ahci_yes_fbs },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230),
 	  .driver_data = board_ahci_yes_fbs },
-	{ PCI_DEVICE(PCI_VENDOR_ID_TTI, 0x0642),
+	{ PCI_DEVICE(PCI_VENDOR_ID_TTI, 0x0642), /* highpoint rocketraid 642L */
+	  .driver_data = board_ahci_yes_fbs },
+	{ PCI_DEVICE(PCI_VENDOR_ID_TTI, 0x0645), /* highpoint rocketraid 644L */
 	  .driver_data = board_ahci_yes_fbs },
 
 	/* Promise */

[PATCH 4.9 10/67] clk: bcm2835: Fix ana->maskX definitions

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Boris Brezillon <boris.brezillon@bootlin.com>

commit 49012d1bf5f78782d398adb984a080a88ba42965 upstream.

ana->maskX values are already '~'-ed in bcm2835_pll_set_rate(). Remove
the '~' in the definition to fix ANA setup.

Note that this commit fixes a long standing bug preventing one from
using an HDMI display if it's plugged after the FW has booted Linux.
This is because PLLH is used by the HDMI encoder to generate the pixel
clock.

Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clk/bcm/clk-bcm2835.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -401,17 +401,17 @@ struct bcm2835_pll_ana_bits {
 static const struct bcm2835_pll_ana_bits bcm2835_ana_default = {
 	.mask0 = 0,
 	.set0 = 0,
-	.mask1 = (u32)~(A2W_PLL_KI_MASK | A2W_PLL_KP_MASK),
+	.mask1 = A2W_PLL_KI_MASK | A2W_PLL_KP_MASK,
 	.set1 = (2 << A2W_PLL_KI_SHIFT) | (8 << A2W_PLL_KP_SHIFT),
-	.mask3 = (u32)~A2W_PLL_KA_MASK,
+	.mask3 = A2W_PLL_KA_MASK,
 	.set3 = (2 << A2W_PLL_KA_SHIFT),
 	.fb_prediv_mask = BIT(14),
 };
 
 static const struct bcm2835_pll_ana_bits bcm2835_ana_pllh = {
-	.mask0 = (u32)~(A2W_PLLH_KA_MASK | A2W_PLLH_KI_LOW_MASK),
+	.mask0 = A2W_PLLH_KA_MASK | A2W_PLLH_KI_LOW_MASK,
 	.set0 = (2 << A2W_PLLH_KA_SHIFT) | (2 << A2W_PLLH_KI_LOW_SHIFT),
-	.mask1 = (u32)~(A2W_PLLH_KI_HIGH_MASK | A2W_PLLH_KP_MASK),
+	.mask1 = A2W_PLLH_KI_HIGH_MASK | A2W_PLLH_KP_MASK,
 	.set1 = (6 << A2W_PLLH_KP_SHIFT),
 	.mask3 = 0,
 	.set3 = 0,

[PATCH 4.9 11/67] clk: bcm2835: Protect sections updating shared registers

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Boris Brezillon <boris.brezillon@bootlin.com>

commit 7997f3b2df751aab0b8e60149b226a32966c41ac upstream.

CM_PLLx and A2W_XOSC_CTRL registers are accessed by different clock
handlers and must be accessed with ->regs_lock held.
Update the sections where this protection is missing.

Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clk/bcm/clk-bcm2835.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -566,8 +566,10 @@ static int bcm2835_pll_on(struct clk_hw
 		     ~A2W_PLL_CTRL_PWRDN);
 
 	/* Take the PLL out of reset. */
+	spin_lock(&cprman->regs_lock);
 	cprman_write(cprman, data->cm_ctrl_reg,
 		     cprman_read(cprman, data->cm_ctrl_reg) & ~CM_PLL_ANARST);
+	spin_unlock(&cprman->regs_lock);
 
 	/* Wait for the PLL to lock. */
 	timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS);
@@ -644,9 +646,11 @@ static int bcm2835_pll_set_rate(struct c
 	}
 
 	/* Unmask the reference clock from the oscillator. */
+	spin_lock(&cprman->regs_lock);
 	cprman_write(cprman, A2W_XOSC_CTRL,
 		     cprman_read(cprman, A2W_XOSC_CTRL) |
 		     data->reference_enable_mask);
+	spin_unlock(&cprman->regs_lock);
 
 	if (do_ana_setup_first)
 		bcm2835_pll_write_ana(cprman, data->ana_reg_base, ana);

[PATCH 4.9 12/67] clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chen-Yu Tsai <wens@csie.org>

commit 5682e268350f9eccdbb04006605c1b7068a7b323 upstream.

When support for the A31/A31s CCU was first added, the clock ops for
the CLK_OUT_* clocks was set to the wrong type. The clocks are MP-type,
but the ops was set for div (M) clocks. This went unnoticed until now.
This was because while they are different clocks, their data structures
aligned in a way that ccu_div_ops would access the second ccu_div_internal
and ccu_mux_internal structures, which were valid, if not incorrect.

Furthermore, the use of these CLK_OUT_* was for feeding a precise 32.768
kHz clock signal to the WiFi chip. This was achievable by using the parent
with the same clock rate and no divider. So the incorrect divider setting
did not affect this usage.

Commit 946797aa3f08 ("clk: sunxi-ng: Support fixed post-dividers on MP
style clocks") added a new field to the ccu_mp structure, which broke
the aforementioned alignment. Now the system crashes as div_ops tries
to look up a nonexistent table.

Reported-by: Philipp Rossak <embed3d@gmail.com>
Tested-by: Philipp Rossak <embed3d@gmail.com>
Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clk/sunxi-ng/ccu-sun6i-a31.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
+++ b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c
@@ -750,7 +750,7 @@ static struct ccu_mp out_a_clk = {
 		.features	= CCU_FEATURE_FIXED_PREDIV,
 		.hw.init	= CLK_HW_INIT_PARENTS("out-a",
 						      clk_out_parents,
-						      &ccu_div_ops,
+						      &ccu_mp_ops,
 						      0),
 	},
 };
@@ -771,7 +771,7 @@ static struct ccu_mp out_b_clk = {
 		.features	= CCU_FEATURE_FIXED_PREDIV,
 		.hw.init	= CLK_HW_INIT_PARENTS("out-b",
 						      clk_out_parents,
-						      &ccu_div_ops,
+						      &ccu_mp_ops,
 						      0),
 	},
 };
@@ -792,7 +792,7 @@ static struct ccu_mp out_c_clk = {
 		.features	= CCU_FEATURE_FIXED_PREDIV,
 		.hw.init	= CLK_HW_INIT_PARENTS("out-c",
 						      clk_out_parents,
-						      &ccu_div_ops,
+						      &ccu_mp_ops,
 						      0),
 	},
 };

[PATCH 4.9 13/67] Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit f44cb4b19ed40b655c2d422c9021ab2c2625adb6 upstream.

The Atheros 1525/QCA6174 BT doesn't seem working properly on the
recent kernels, as it tries to load a wrong firmware
ar3k/AthrBT_0x00000200.dfu and it fails.

This seems to have been a problem for some time, and the known
workaround is to apply BTUSB_QCA_ROM quirk instead of BTUSB_ATH3012.

The device in question is:

T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=03 Dev#=  4 Spd=12   MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P: Vendor=0cf3 ProdID=3004 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1082504
Reported-by: Ivan Levshin <ivan.levshin@microfocus.com>
Tested-by: Ivan Levshin <ivan.levshin@microfocus.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/bluetooth/btusb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -217,7 +217,6 @@ static const struct usb_device_id blackl
 	{ USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
-	{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
@@ -250,6 +249,7 @@ static const struct usb_device_id blackl
 	{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
 
 	/* QCA ROME chipset */
+	{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x0cf3, 0xe009), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME },

[PATCH 4.9 14/67] libata: fix length validation of ATAPI-relayed SCSI commands

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

commit 058f58e235cbe03e923b30ea7c49995a46a8725f upstream.

syzkaller reported a crash in ata_bmdma_fill_sg() when writing to
/dev/sg1.  The immediate cause was that the ATA command's scatterlist
was not DMA-mapped, which causes 'pi - 1' to underflow, resulting in a
write to 'qc->ap->bmdma_prd[0xffffffff]'.

Strangely though, the flag ATA_QCFLAG_DMAMAP was set in qc->flags.  The
root cause is that when __ata_scsi_queuecmd() is preparing to relay a
SCSI command to an ATAPI device, it doesn't correctly validate the CDB
length before copying it into the 16-byte buffer 'cdb' in 'struct
ata_queued_cmd'.  Namely, it validates the fixed CDB length expected
based on the SCSI opcode but not the actual CDB length, which can be
larger due to the use of the SG_NEXT_CMD_LEN ioctl.  Since 'flags' is
the next member in ata_queued_cmd, a buffer overflow corrupts it.

Fix it by requiring that the actual CDB length be <= 16 (ATAPI_CDB_LEN).

[Really it seems the length should be required to be <= dev->cdb_len,
but the current behavior seems to have been intentionally introduced by
commit 607126c2a21c ("libata-scsi: be tolerant of 12-byte ATAPI commands
in 16-byte CDBs") to work around a userspace bug in mplayer.  Probably
the workaround is no longer needed (mplayer was fixed in 2007), but
continuing to allow lengths to up 16 appears harmless for now.]

Here's a reproducer that works in QEMU when /dev/sg1 refers to the
CD-ROM drive that qemu-system-x86_64 creates by default:

    #include <fcntl.h>
    #include <sys/ioctl.h>
    #include <unistd.h>

    #define SG_NEXT_CMD_LEN 0x2283

    int main()
    {
	    char buf[53] = { [36] = 0x7e, [52] = 0x02 };
	    int fd = open("/dev/sg1", O_RDWR);
	    ioctl(fd, SG_NEXT_CMD_LEN, &(int){ 17 });
	    write(fd, buf, sizeof(buf));
    }

The crash was:

    BUG: unable to handle kernel paging request at ffff8cb97db37ffc
    IP: ata_bmdma_fill_sg drivers/ata/libata-sff.c:2623 [inline]
    IP: ata_bmdma_qc_prep+0xa4/0xc0 drivers/ata/libata-sff.c:2727
    PGD fb6c067 P4D fb6c067 PUD 0
    Oops: 0002 [#1] SMP
    CPU: 1 PID: 150 Comm: syz_ata_bmdma_q Not tainted 4.15.0-next-20180202 #99
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
    [...]
    Call Trace:
     ata_qc_issue+0x100/0x1d0 drivers/ata/libata-core.c:5421
     ata_scsi_translate+0xc9/0x1a0 drivers/ata/libata-scsi.c:2024
     __ata_scsi_queuecmd drivers/ata/libata-scsi.c:4326 [inline]
     ata_scsi_queuecmd+0x8c/0x210 drivers/ata/libata-scsi.c:4375
     scsi_dispatch_cmd+0xa2/0xe0 drivers/scsi/scsi_lib.c:1727
     scsi_request_fn+0x24c/0x530 drivers/scsi/scsi_lib.c:1865
     __blk_run_queue_uncond block/blk-core.c:412 [inline]
     __blk_run_queue+0x3a/0x60 block/blk-core.c:432
     blk_execute_rq_nowait+0x93/0xc0 block/blk-exec.c:78
     sg_common_write.isra.7+0x272/0x5a0 drivers/scsi/sg.c:806
     sg_write+0x1ef/0x340 drivers/scsi/sg.c:677
     __vfs_write+0x31/0x160 fs/read_write.c:480
     vfs_write+0xa7/0x160 fs/read_write.c:544
     SYSC_write fs/read_write.c:589 [inline]
     SyS_write+0x4d/0xc0 fs/read_write.c:581
     do_syscall_64+0x5e/0x110 arch/x86/entry/common.c:287
     entry_SYSCALL_64_after_hwframe+0x21/0x86

Fixes: 607126c2a21c ("libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs")
Reported-by: syzbot+1ff6f9fcc3c35f1c72a95e26528c8e7e3276e4da@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org> # v2.6.24+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-scsi.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -4177,7 +4177,9 @@ static inline int __ata_scsi_queuecmd(st
 		if (likely((scsi_op != ATA_16) || !atapi_passthru16)) {
 			/* relay SCSI command to ATAPI device */
 			int len = COMMAND_SIZE(scsi_op);
-			if (unlikely(len > scmd->cmd_len || len > dev->cdb_len))
+			if (unlikely(len > scmd->cmd_len ||
+				     len > dev->cdb_len ||
+				     scmd->cmd_len > ATAPI_CDB_LEN))
 				goto bad_cdb_len;
 
 			xlat_func = atapi_xlat;

[PATCH 4.9 15/67] libata: remove WARN() for DMA or PIO command without data

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

commit 9173e5e80729c8434b8d27531527c5245f4a5594 upstream.

syzkaller hit a WARN() in ata_qc_issue() when writing to /dev/sg0.  This
happened because it issued a READ_6 command with no data buffer.

Just remove the WARN(), as it doesn't appear indicate a kernel bug.  The
expected behavior is to fail the command, which the code does.

Here's a reproducer that works in QEMU when /dev/sg0 refers to a disk of
the default type ("82371SB PIIX3 IDE"):

    #include <fcntl.h>
    #include <unistd.h>

    int main()
    {
            char buf[42] = { [36] = 0x8 /* READ_6 */ };

            write(open("/dev/sg0", O_RDWR), buf, sizeof(buf));
    }

Fixes: f92a26365a72 ("libata: change ATA_QCFLAG_DMAMAP semantics")
Reported-by: syzbot+f7b556d1766502a69d85071d2ff08bd87be53d0f@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org> # v2.6.25+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-core.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5265,8 +5265,7 @@ void ata_qc_issue(struct ata_queued_cmd
 	 * We guarantee to LLDs that they will have at least one
 	 * non-zero sg if the command is a data command.
 	 */
-	if (WARN_ON_ONCE(ata_is_data(prot) &&
-			 (!qc->sg || !qc->n_elem || !qc->nbytes)))
+	if (ata_is_data(prot) && (!qc->sg || !qc->n_elem || !qc->nbytes))
 		goto sys_err;
 
 	if (ata_is_dma(prot) || (ata_is_pio(prot) &&

[PATCH 4.9 16/67] libata: dont try to pass through NCQ commands to non-NCQ devices

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Biggers <ebiggers@google.com>

commit 2c1ec6fda2d07044cda922ee25337cf5d4b429b3 upstream.

syzkaller hit a WARN() in ata_bmdma_qc_issue() when writing to /dev/sg0.
This happened because it issued an ATA pass-through command (ATA_16)
where the protocol field indicated that NCQ should be used -- but the
device did not support NCQ.

We could just remove the WARN() from libata-sff.c, but the real problem
seems to be that the SCSI -> ATA translation code passes through NCQ
commands without verifying that the device actually supports NCQ.

Fix this by adding the appropriate check to ata_scsi_pass_thru().

Here's reproducer that works in QEMU when /dev/sg0 refers to a disk of
the default type ("82371SB PIIX3 IDE"):

    #include <fcntl.h>
    #include <unistd.h>

    int main()
    {
            char buf[53] = { 0 };

	    buf[36] = 0x85;		/* ATA_16 */
	    buf[37] = (12 << 1);	/* FPDMA */
	    buf[38] = 0x1;		/* Has data */
	    buf[51] = 0xC8;		/* ATA_CMD_READ */
            write(open("/dev/sg0", O_RDWR), buf, sizeof(buf));
    }

Fixes: ee7fb331c3ac ("libata: add support for NCQ commands for SG interface")
Reported-by: syzbot+2f69ca28df61bdfc77cd36af2e789850355a221e@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-scsi.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3226,6 +3226,12 @@ static unsigned int ata_scsi_pass_thru(s
 		goto invalid_fld;
 	}
 
+	/* We may not issue NCQ commands to devices not supporting NCQ */
+	if (ata_is_ncq(tf->protocol) && !ata_ncq_enabled(dev)) {
+		fp = 1;
+		goto invalid_fld;
+	}
+
 	/* sanity check for pio multi commands */
 	if ((cdb[1] & 0xe0) && !is_multi_taskfile(tf)) {
 		fp = 1;

[PATCH 4.9 17/67] libata: Apply NOLPM quirk to Crucial MX100 512GB SSDs

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 9c7be59fc519af9081c46c48f06f2b8fadf55ad8 upstream.

Various people have reported the Crucial MX100 512GB model not working
with LPM set to min_power. I've now received a report that it also does
not work with the new med_power_with_dipm level.

It does work with medium_power, but that has no measurable power-savings
and given the amount of people being bitten by the other levels not
working, this commit just disables LPM altogether.

Note all reporters of this have either the 512GB model (max capacity), or
are not specifying their SSD's size. So for now this quirk assumes this is
a problem with the 512GB model only.

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=89261
Buglink: https://github.com/linrunner/TLP/issues/84
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-core.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4403,6 +4403,11 @@ static const struct ata_blacklist_entry
 	{ "PIONEER DVD-RW  DVR-212D",	NULL,	ATA_HORKAGE_NOSETXFER },
 	{ "PIONEER DVD-RW  DVR-216D",	NULL,	ATA_HORKAGE_NOSETXFER },
 
+	/* The 512GB version of the MX100 has both queued TRIM and LPM issues */
+	{ "Crucial_CT512MX100*",	NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_ZERO_AFTER_TRIM |
+						ATA_HORKAGE_NOLPM, },
+
 	/* devices that don't properly handle queued TRIM commands */
 	{ "Micron_M500_*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },

[PATCH 4.9 18/67] libata: disable LPM for Crucial BX100 SSD 500GB drive

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

commit b17e5729a630d8326a48ec34ef02e6b4464a6aef upstream.

After Laptop Mode Tools starts to use min_power for LPM, a user found
out Crucial BX100 SSD can't get mounted.

Crucial BX100 SSD 500GB drive don't work well with min_power. This also
happens to med_power_with_dipm.

So let's disable LPM for Crucial BX100 SSD 500GB drive.

BugLink: https://bugs.launchpad.net/bugs/1726930
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-core.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4403,6 +4403,9 @@ static const struct ata_blacklist_entry
 	{ "PIONEER DVD-RW  DVR-212D",	NULL,	ATA_HORKAGE_NOSETXFER },
 	{ "PIONEER DVD-RW  DVR-216D",	NULL,	ATA_HORKAGE_NOSETXFER },
 
+	/* Crucial BX100 SSD 500GB has broken LPM support */
+	{ "CT500BX100SSD1",		"MU02",	ATA_HORKAGE_NOLPM },
+
 	/* The 512GB version of the MX100 has both queued TRIM and LPM issues */
 	{ "Crucial_CT512MX100*",	NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM |

[PATCH 4.9 19/67] libata: Enable queued TRIM for Samsung SSD 860

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ju Hyung Park <qkrwngud825@gmail.com>

commit ca6bfcb2f6d9deab3924bf901e73622a94900473 upstream.

Samsung explicitly states that queued TRIM is supported for Linux with
860 PRO and 860 EVO.

Make the previous blacklist to cover only 840 and 850 series.

Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-core.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4422,7 +4422,9 @@ static const struct ata_blacklist_entry
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Crucial_CT*MX100*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
-	{ "Samsung SSD 8*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+	{ "Samsung SSD 840*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_ZERO_AFTER_TRIM, },
+	{ "Samsung SSD 850*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "FCCT*M500*",			NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },

[PATCH 4.9 20/67] libata: Apply NOLPM quirk to Crucial M500 480 and 960GB SSDs

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 62ac3f7305470e3f52f159de448bc1a771717e88 upstream.

There have been reports of the Crucial M500 480GB model not working
with LPM set to min_power / med_power_with_dipm level.

It has not been tested with medium_power, but that typically has no
measurable power-savings.

Note the reporters Crucial_CT480M500SSD3 has a firmware version of MU03
and there is a MU05 update available, but that update does not mention any
LPM fixes in its changelog, so the quirk matches all firmware versions.

In my experience the LPM problems with (older) Crucial SSDs seem to be
limited to higher capacity versions of the SSDs (different firmware?),
so this commit adds a NOLPM quirk for the 480 and 960GB versions of the
M500, to avoid LPM causing issues with these SSDs.

Cc: stable@vger.kernel.org
Reported-and-tested-by: Martin Steigerwald <martin@lichtvoll.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-core.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4411,6 +4411,14 @@ static const struct ata_blacklist_entry
 						ATA_HORKAGE_ZERO_AFTER_TRIM |
 						ATA_HORKAGE_NOLPM, },
 
+	/* 480GB+ M500 SSDs have both queued TRIM and LPM issues */
+	{ "Crucial_CT480M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_ZERO_AFTER_TRIM |
+						ATA_HORKAGE_NOLPM, },
+	{ "Crucial_CT960M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_ZERO_AFTER_TRIM |
+						ATA_HORKAGE_NOLPM, },
+
 	/* devices that don't properly handle queued TRIM commands */
 	{ "Micron_M500_*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },

[PATCH 4.9 21/67] libata: Make Crucial BX100 500GB LPM quirk apply to all firmware versions

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 3bf7b5d6d017c27e0d3b160aafb35a8e7cfeda1f upstream.

Commit b17e5729a630 ("libata: disable LPM for Crucial BX100 SSD 500GB
drive"), introduced a ATA_HORKAGE_NOLPM quirk for Crucial BX100 500GB SSDs
but limited this to the MU02 firmware version, according to:
http://www.crucial.com/usa/en/support-ssd-firmware

MU02 is the last version, so there are no newer possibly fixed versions
and if the MU02 version has broken LPM then the MU01 almost certainly
also has broken LPM, so this commit changes the quirk to apply to all
firmware versions.

Fixes: b17e5729a630 ("libata: disable LPM for Crucial BX100 SSD 500GB...")
Cc: stable@vger.kernel.org
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4404,7 +4404,7 @@ static const struct ata_blacklist_entry
 	{ "PIONEER DVD-RW  DVR-216D",	NULL,	ATA_HORKAGE_NOSETXFER },
 
 	/* Crucial BX100 SSD 500GB has broken LPM support */
-	{ "CT500BX100SSD1",		"MU02",	ATA_HORKAGE_NOLPM },
+	{ "CT500BX100SSD1",		NULL,	ATA_HORKAGE_NOLPM },
 
 	/* The 512GB version of the MX100 has both queued TRIM and LPM issues */
 	{ "Crucial_CT512MX100*",	NULL,	ATA_HORKAGE_NO_NCQ_TRIM |

[PATCH 4.9 22/67] libata: Modify quirks for MX100 to limit NCQ_TRIM quirk to MU01 version

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit d418ff56b8f2d2b296daafa8da151fe27689b757 upstream.

When commit 9c7be59fc519af ("libata: Apply NOLPM quirk to Crucial MX100
512GB SSDs") was added it inherited the ATA_HORKAGE_NO_NCQ_TRIM quirk
from the existing "Crucial_CT*MX100*" entry, but that entry sets model_rev
to "MU01", where as the entry adding the NOLPM quirk sets it to NULL.

This means that after this commit we no apply the NO_NCQ_TRIM quirk to
all "Crucial_CT512MX100*" SSDs even if they have the fixed "MU02"
firmware. This commit splits the "Crucial_CT512MX100*" quirk into 2
quirks, one for the "MU01" firmware and one for all other firmware
versions, so that we once again only apply the NO_NCQ_TRIM quirk to the
"MU01" firmware version.

Fixes: 9c7be59fc519af ("libata: Apply NOLPM quirk to ... MX100 512GB SSDs")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-core.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4406,10 +4406,13 @@ static const struct ata_blacklist_entry
 	/* Crucial BX100 SSD 500GB has broken LPM support */
 	{ "CT500BX100SSD1",		NULL,	ATA_HORKAGE_NOLPM },
 
-	/* The 512GB version of the MX100 has both queued TRIM and LPM issues */
-	{ "Crucial_CT512MX100*",	NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+	/* 512GB MX100 with MU01 firmware has both queued TRIM and LPM issues */
+	{ "Crucial_CT512MX100*",	"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM |
 						ATA_HORKAGE_NOLPM, },
+	/* 512GB MX100 with newer firmware has only LPM issues */
+	{ "Crucial_CT512MX100*",	NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM |
+						ATA_HORKAGE_NOLPM, },
 
 	/* 480GB+ M500 SSDs have both queued TRIM and LPM issues */
 	{ "Crucial_CT480M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |

[PATCH 4.9 23/67] nfsd: remove blocked locks on client teardown

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Layton <jlayton@redhat.com>

commit 68ef3bc3166468678d5e1fdd216628c35bd1186f upstream.

We had some reports of panics in nfsd4_lm_notify, and that showed a
nfs4_lockowner that had outlived its so_client.

Ensure that we walk any leftover lockowners after tearing down all of
the stateids, and remove any blocked locks that they hold.

With this change, we also don't need to walk the nbl_lru on nfsd_net
shutdown, as that will happen naturally when we tear down the clients.

Fixes: 76d348fadff5 (nfsd: have nfsd4_lock use blocking locks for v4.1+ locks)
Reported-by: Frank Sorenson <fsorenso@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: stable@vger.kernel.org # 4.9
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfsd/nfs4state.c |   62 ++++++++++++++++++++++++++++++++++++----------------
 1 file changed, 43 insertions(+), 19 deletions(-)

--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -263,6 +263,35 @@ free_blocked_lock(struct nfsd4_blocked_l
 	kfree(nbl);
 }
 
+static void
+remove_blocked_locks(struct nfs4_lockowner *lo)
+{
+	struct nfs4_client *clp = lo->lo_owner.so_client;
+	struct nfsd_net *nn = net_generic(clp->net, nfsd_net_id);
+	struct nfsd4_blocked_lock *nbl;
+	LIST_HEAD(reaplist);
+
+	/* Dequeue all blocked locks */
+	spin_lock(&nn->blocked_locks_lock);
+	while (!list_empty(&lo->lo_blocked)) {
+		nbl = list_first_entry(&lo->lo_blocked,
+					struct nfsd4_blocked_lock,
+					nbl_list);
+		list_del_init(&nbl->nbl_list);
+		list_move(&nbl->nbl_lru, &reaplist);
+	}
+	spin_unlock(&nn->blocked_locks_lock);
+
+	/* Now free them */
+	while (!list_empty(&reaplist)) {
+		nbl = list_first_entry(&reaplist, struct nfsd4_blocked_lock,
+					nbl_lru);
+		list_del_init(&nbl->nbl_lru);
+		posix_unblock_lock(&nbl->nbl_lock);
+		free_blocked_lock(nbl);
+	}
+}
+
 static int
 nfsd4_cb_notify_lock_done(struct nfsd4_callback *cb, struct rpc_task *task)
 {
@@ -1854,6 +1883,7 @@ static __be32 mark_client_expired_locked
 static void
 __destroy_client(struct nfs4_client *clp)
 {
+	int i;
 	struct nfs4_openowner *oo;
 	struct nfs4_delegation *dp;
 	struct list_head reaplist;
@@ -1883,6 +1913,16 @@ __destroy_client(struct nfs4_client *clp
 		nfs4_get_stateowner(&oo->oo_owner);
 		release_openowner(oo);
 	}
+	for (i = 0; i < OWNER_HASH_SIZE; i++) {
+		struct nfs4_stateowner *so, *tmp;
+
+		list_for_each_entry_safe(so, tmp, &clp->cl_ownerstr_hashtbl[i],
+					 so_strhash) {
+			/* Should be no openowners at this point */
+			WARN_ON_ONCE(so->so_is_open_owner);
+			remove_blocked_locks(lockowner(so));
+		}
+	}
 	nfsd4_return_all_client_layouts(clp);
 	nfsd4_shutdown_callback(clp);
 	if (clp->cl_cb_conn.cb_xprt)
@@ -6266,6 +6306,7 @@ nfsd4_release_lockowner(struct svc_rqst
 	}
 	spin_unlock(&clp->cl_lock);
 	free_ol_stateid_reaplist(&reaplist);
+	remove_blocked_locks(lo);
 	nfs4_put_stateowner(&lo->lo_owner);
 
 	return status;
@@ -7051,6 +7092,8 @@ nfs4_state_destroy_net(struct net *net)
 		}
 	}
 
+	WARN_ON(!list_empty(&nn->blocked_locks_lru));
+
 	for (i = 0; i < CLIENT_HASH_SIZE; i++) {
 		while (!list_empty(&nn->unconf_id_hashtbl[i])) {
 			clp = list_entry(nn->unconf_id_hashtbl[i].next, struct nfs4_client, cl_idhash);
@@ -7117,7 +7160,6 @@ nfs4_state_shutdown_net(struct net *net)
 	struct nfs4_delegation *dp = NULL;
 	struct list_head *pos, *next, reaplist;
 	struct nfsd_net *nn = net_generic(net, nfsd_net_id);
-	struct nfsd4_blocked_lock *nbl;
 
 	cancel_delayed_work_sync(&nn->laundromat_work);
 	locks_end_grace(&nn->nfsd4_manager);
@@ -7138,24 +7180,6 @@ nfs4_state_shutdown_net(struct net *net)
 		nfs4_put_stid(&dp->dl_stid);
 	}
 
-	BUG_ON(!list_empty(&reaplist));
-	spin_lock(&nn->blocked_locks_lock);
-	while (!list_empty(&nn->blocked_locks_lru)) {
-		nbl = list_first_entry(&nn->blocked_locks_lru,
-					struct nfsd4_blocked_lock, nbl_lru);
-		list_move(&nbl->nbl_lru, &reaplist);
-		list_del_init(&nbl->nbl_list);
-	}
-	spin_unlock(&nn->blocked_locks_lock);
-
-	while (!list_empty(&reaplist)) {
-		nbl = list_first_entry(&reaplist,
-					struct nfsd4_blocked_lock, nbl_lru);
-		list_del_init(&nbl->nbl_lru);
-		posix_unblock_lock(&nbl->nbl_lock);
-		free_blocked_lock(nbl);
-	}
-
 	nfsd4_client_tracking_exit(net);
 	nfs4_state_destroy_net(net);
 }

[PATCH 4.9 24/67] mm/vmalloc: add interfaces to free unmapped page table

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Toshi Kani <toshi.kani@hpe.com>

commit b6bdb7517c3d3f41f20e5c2948d6bc3f8897394e upstream.

On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may
create pud/pmd mappings.  A kernel panic was observed on arm64 systems
with Cortex-A75 in the following steps as described by Hanjun Guo.

 1. ioremap a 4K size, valid page table will build,
 2. iounmap it, pte0 will set to 0;
 3. ioremap the same address with 2M size, pgd/pmd is unchanged,
    then set the a new value for pmd;
 4. pte0 is leaked;
 5. CPU may meet exception because the old pmd is still in TLB,
    which will lead to kernel panic.

This panic is not reproducible on x86.  INVLPG, called from iounmap,
purges all levels of entries associated with purged address on x86.  x86
still has memory leak.

The patch changes the ioremap path to free unmapped page table(s) since
doing so in the unmap path has the following issues:

 - The iounmap() path is shared with vunmap(). Since vmap() only
   supports pte mappings, making vunmap() to free a pte page is an
   overhead for regular vmap users as they do not need a pte page freed
   up.

 - Checking if all entries in a pte page are cleared in the unmap path
   is racy, and serializing this check is expensive.

 - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges.
   Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB
   purge.

Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which
clear a given pud/pmd entry and free up a page for the lower level
entries.

This patch implements their stub functions on x86 and arm64, which work
as workaround.

[akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub]
Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com
Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings")
Reported-by: Lei Li <lious.lilei@hisilicon.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Wang Xuefeng <wxf.wang@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Chintan Pandya <cpandya@codeaurora.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/mm/mmu.c           |   10 ++++++++++
 arch/x86/mm/pgtable.c         |   24 ++++++++++++++++++++++++
 include/asm-generic/pgtable.h |   10 ++++++++++
 lib/ioremap.c                 |    6 ++++--
 4 files changed, 48 insertions(+), 2 deletions(-)

--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -772,3 +772,13 @@ int pmd_clear_huge(pmd_t *pmd)
 	pmd_clear(pmd);
 	return 1;
 }
+
+int pud_free_pmd_page(pud_t *pud)
+{
+	return pud_none(*pud);
+}
+
+int pmd_free_pte_page(pmd_t *pmd)
+{
+	return pmd_none(*pmd);
+}
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -643,4 +643,28 @@ int pmd_clear_huge(pmd_t *pmd)
 
 	return 0;
 }
+
+/**
+ * pud_free_pmd_page - Clear pud entry and free pmd page.
+ * @pud: Pointer to a PUD.
+ *
+ * Context: The pud range has been unmaped and TLB purged.
+ * Return: 1 if clearing the entry succeeded. 0 otherwise.
+ */
+int pud_free_pmd_page(pud_t *pud)
+{
+	return pud_none(*pud);
+}
+
+/**
+ * pmd_free_pte_page - Clear pmd entry and free pte page.
+ * @pmd: Pointer to a PMD.
+ *
+ * Context: The pmd range has been unmaped and TLB purged.
+ * Return: 1 if clearing the entry succeeded. 0 otherwise.
+ */
+int pmd_free_pte_page(pmd_t *pmd)
+{
+	return pmd_none(*pmd);
+}
 #endif	/* CONFIG_HAVE_ARCH_HUGE_VMAP */
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -764,6 +764,8 @@ int pud_set_huge(pud_t *pud, phys_addr_t
 int pmd_set_huge(pmd_t *pmd, phys_addr_t addr, pgprot_t prot);
 int pud_clear_huge(pud_t *pud);
 int pmd_clear_huge(pmd_t *pmd);
+int pud_free_pmd_page(pud_t *pud);
+int pmd_free_pte_page(pmd_t *pmd);
 #else	/* !CONFIG_HAVE_ARCH_HUGE_VMAP */
 static inline int pud_set_huge(pud_t *pud, phys_addr_t addr, pgprot_t prot)
 {
@@ -781,6 +783,14 @@ static inline int pmd_clear_huge(pmd_t *
 {
 	return 0;
 }
+static inline int pud_free_pmd_page(pud_t *pud)
+{
+	return 0;
+}
+static inline int pmd_free_pte_page(pmd_t *pmd)
+{
+	return 0;
+}
 #endif	/* CONFIG_HAVE_ARCH_HUGE_VMAP */
 
 #ifndef __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
--- a/lib/ioremap.c
+++ b/lib/ioremap.c
@@ -83,7 +83,8 @@ static inline int ioremap_pmd_range(pud_
 
 		if (ioremap_pmd_enabled() &&
 		    ((next - addr) == PMD_SIZE) &&
-		    IS_ALIGNED(phys_addr + addr, PMD_SIZE)) {
+		    IS_ALIGNED(phys_addr + addr, PMD_SIZE) &&
+		    pmd_free_pte_page(pmd)) {
 			if (pmd_set_huge(pmd, phys_addr + addr, prot))
 				continue;
 		}
@@ -109,7 +110,8 @@ static inline int ioremap_pud_range(pgd_
 
 		if (ioremap_pud_enabled() &&
 		    ((next - addr) == PUD_SIZE) &&
-		    IS_ALIGNED(phys_addr + addr, PUD_SIZE)) {
+		    IS_ALIGNED(phys_addr + addr, PUD_SIZE) &&
+		    pud_free_pmd_page(pud)) {
 			if (pud_set_huge(pud, phys_addr + addr, prot))
 				continue;
 		}

[PATCH 4.9 25/67] x86/mm: implement free pmd/pte page interfaces

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Toshi Kani <toshi.kani@hpe.com>

commit 28ee90fe6048fa7b7ceaeb8831c0e4e454a4cf89 upstream.

Implement pud_free_pmd_page() and pmd_free_pte_page() on x86, which
clear a given pud/pmd entry and free up lower level page table(s).

The address range associated with the pud/pmd entry must have been
purged by INVLPG.

Link: http://lkml.kernel.org/r/20180314180155.19492-3-toshi.kani@hpe.com
Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings")
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reported-by: Lei Li <lious.lilei@hisilicon.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/mm/pgtable.c |   28 ++++++++++++++++++++++++++--
 1 file changed, 26 insertions(+), 2 deletions(-)

--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -653,7 +653,22 @@ int pmd_clear_huge(pmd_t *pmd)
  */
 int pud_free_pmd_page(pud_t *pud)
 {
-	return pud_none(*pud);
+	pmd_t *pmd;
+	int i;
+
+	if (pud_none(*pud))
+		return 1;
+
+	pmd = (pmd_t *)pud_page_vaddr(*pud);
+
+	for (i = 0; i < PTRS_PER_PMD; i++)
+		if (!pmd_free_pte_page(&pmd[i]))
+			return 0;
+
+	pud_clear(pud);
+	free_page((unsigned long)pmd);
+
+	return 1;
 }
 
 /**
@@ -665,6 +680,15 @@ int pud_free_pmd_page(pud_t *pud)
  */
 int pmd_free_pte_page(pmd_t *pmd)
 {
-	return pmd_none(*pmd);
+	pte_t *pte;
+
+	if (pmd_none(*pmd))
+		return 1;
+
+	pte = (pte_t *)pmd_page_vaddr(*pmd);
+	pmd_clear(pmd);
+	free_page((unsigned long)pte);
+
+	return 1;
 }
 #endif	/* CONFIG_HAVE_ARCH_HUGE_VMAP */

[PATCH 4.9 26/67] mm/khugepaged.c: convert VM_BUG_ON() to collapse fail

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>

commit fece2029a9e65b9a990831afe2a2b83290cbbe26 upstream.

khugepaged is not yet able to convert PTE-mapped huge pages back to PMD
mapped.  We do not collapse such pages.  See check
khugepaged_scan_pmd().

But if between khugepaged_scan_pmd() and __collapse_huge_page_isolate()
somebody managed to instantiate THP in the range and then split the PMD
back to PTEs we would have a problem --
VM_BUG_ON_PAGE(PageCompound(page)) will get triggered.

It's possible since we drop mmap_sem during collapse to re-take for
write.

Replace the VM_BUG_ON() with graceful collapse fail.

Link: http://lkml.kernel.org/r/20180315152353.27989-1-kirill.shutemov@linux.intel.com
Fixes: b1caa957ae6d ("khugepaged: ignore pmd tables with THP mapped with ptes")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/khugepaged.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -528,7 +528,12 @@ static int __collapse_huge_page_isolate(
 			goto out;
 		}
 
-		VM_BUG_ON_PAGE(PageCompound(page), page);
+		/* TODO: teach khugepaged to collapse THP mapped with pte */
+		if (PageCompound(page)) {
+			result = SCAN_PAGE_COMPOUND;
+			goto out;
+		}
+
 		VM_BUG_ON_PAGE(!PageAnon(page), page);
 		VM_BUG_ON_PAGE(!PageSwapBacked(page), page);
 

[PATCH 4.9 27/67] mm/thp: do not wait for lock_page() in deferred_split_scan()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>

commit fa41b900c30b45fab03783724932dc30cd46a6be upstream.

deferred_split_scan() gets called from reclaim path.  Waiting for page
lock may lead to deadlock there.

Replace lock_page() with trylock_page() and skip the page if we failed
to lock it.  We will get to the page on the next scan.

Link: http://lkml.kernel.org/r/20180315150747.31945-1-kirill.shutemov@linux.intel.com
Fixes: 9a982250f773 ("thp: introduce deferred_split_huge_page()")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/huge_memory.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2279,11 +2279,13 @@ static unsigned long deferred_split_scan
 
 	list_for_each_safe(pos, next, &list) {
 		page = list_entry((void *)pos, struct page, mapping);
-		lock_page(page);
+		if (!trylock_page(page))
+			goto next;
 		/* split_huge_page() removes page from list on success */
 		if (!split_huge_page(page))
 			split++;
 		unlock_page(page);
+next:
 		put_page(page);
 	}
 

[PATCH 4.9 28/67] mm/shmem: do not wait for lock_page() in shmem_unused_huge_shrink()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>

commit b3cd54b257ad95d344d121dc563d943ca39b0921 upstream.

shmem_unused_huge_shrink() gets called from reclaim path.  Waiting for
page lock may lead to deadlock there.

There was a bug report that may be attributed to this:

  http://lkml.kernel.org/r/alpine.LRH.2.11.1801242349220.30642@mail.ewheeler.net

Replace lock_page() with trylock_page() and skip the page if we failed
to lock it.  We will get to the page on the next scan.

We can test for the PageTransHuge() outside the page lock as we only
need protection against splitting the page under us.  Holding pin oni
the page is enough for this.

Link: http://lkml.kernel.org/r/20180316210830.43738-1-kirill.shutemov@linux.intel.com
Fixes: 779750d20b93 ("shmem: split huge pages beyond i_size under memory pressure")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Eric Wheeler <linux-mm@lists.ewheeler.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>	[4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/shmem.c |   31 ++++++++++++++++++++-----------
 1 file changed, 20 insertions(+), 11 deletions(-)

--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -466,36 +466,45 @@ next:
 		info = list_entry(pos, struct shmem_inode_info, shrinklist);
 		inode = &info->vfs_inode;
 
-		if (nr_to_split && split >= nr_to_split) {
-			iput(inode);
-			continue;
-		}
+		if (nr_to_split && split >= nr_to_split)
+			goto leave;
 
-		page = find_lock_page(inode->i_mapping,
+		page = find_get_page(inode->i_mapping,
 				(inode->i_size & HPAGE_PMD_MASK) >> PAGE_SHIFT);
 		if (!page)
 			goto drop;
 
+		/* No huge page at the end of the file: nothing to split */
 		if (!PageTransHuge(page)) {
-			unlock_page(page);
 			put_page(page);
 			goto drop;
 		}
 
+		/*
+		 * Leave the inode on the list if we failed to lock
+		 * the page at this time.
+		 *
+		 * Waiting for the lock may lead to deadlock in the
+		 * reclaim path.
+		 */
+		if (!trylock_page(page)) {
+			put_page(page);
+			goto leave;
+		}
+
 		ret = split_huge_page(page);
 		unlock_page(page);
 		put_page(page);
 
-		if (ret) {
-			/* split failed: leave it on the list */
-			iput(inode);
-			continue;
-		}
+		/* If split failed leave the inode on the list */
+		if (ret)
+			goto leave;
 
 		split++;
 drop:
 		list_del_init(&info->shrinklist);
 		removed++;
+leave:
 		iput(inode);
 	}
 

[PATCH 4.9 29/67] drm/vmwgfx: Fix a destoy-while-held mutex problem.

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Hellstrom <thellstrom@vmware.com>

commit 73a88250b70954a8f27c2444e1c2411bba3c29d9 upstream.

When validating legacy surfaces, the backup bo might be destroyed at
surface validate time. However, the kms resource validation code may have
the bo reserved, so we will destroy a locked mutex. While there shouldn't
be any other users of that mutex when it is destroyed, it causes a lock
leak and thus throws a lockdep error.

Fix this by having the kms resource validation code hold a reference to
the bo while we have it reserved. We do this by introducing a validation
context which might come in handy when the kms code is extended to validate
multiple resources or buffers.

Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c  |   28 +++++++++++++++++++---------
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.h  |   12 +++++++++---
 drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c |    5 +++--
 drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c |    5 +++--
 4 files changed, 34 insertions(+), 16 deletions(-)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -27,7 +27,6 @@
 
 #include "vmwgfx_kms.h"
 
-
 /* Might need a hrtimer here? */
 #define VMWGFX_PRESENT_RATE ((HZ / 60 > 0) ? HZ / 60 : 1)
 
@@ -1933,9 +1932,12 @@ void vmw_kms_helper_buffer_finish(struct
  * Helper to be used if an error forces the caller to undo the actions of
  * vmw_kms_helper_resource_prepare.
  */
-void vmw_kms_helper_resource_revert(struct vmw_resource *res)
+void vmw_kms_helper_resource_revert(struct vmw_validation_ctx *ctx)
 {
-	vmw_kms_helper_buffer_revert(res->backup);
+	struct vmw_resource *res = ctx->res;
+
+	vmw_kms_helper_buffer_revert(ctx->buf);
+	vmw_dmabuf_unreference(&ctx->buf);
 	vmw_resource_unreserve(res, false, NULL, 0);
 	mutex_unlock(&res->dev_priv->cmdbuf_mutex);
 }
@@ -1952,10 +1954,14 @@ void vmw_kms_helper_resource_revert(stru
  * interrupted by a signal.
  */
 int vmw_kms_helper_resource_prepare(struct vmw_resource *res,
-				    bool interruptible)
+				    bool interruptible,
+				    struct vmw_validation_ctx *ctx)
 {
 	int ret = 0;
 
+	ctx->buf = NULL;
+	ctx->res = res;
+
 	if (interruptible)
 		ret = mutex_lock_interruptible(&res->dev_priv->cmdbuf_mutex);
 	else
@@ -1974,6 +1980,8 @@ int vmw_kms_helper_resource_prepare(stru
 						    res->dev_priv->has_mob);
 		if (ret)
 			goto out_unreserve;
+
+		ctx->buf = vmw_dmabuf_reference(res->backup);
 	}
 	ret = vmw_resource_validate(res);
 	if (ret)
@@ -1981,7 +1989,7 @@ int vmw_kms_helper_resource_prepare(stru
 	return 0;
 
 out_revert:
-	vmw_kms_helper_buffer_revert(res->backup);
+	vmw_kms_helper_buffer_revert(ctx->buf);
 out_unreserve:
 	vmw_resource_unreserve(res, false, NULL, 0);
 out_unlock:
@@ -1997,11 +2005,13 @@ out_unlock:
  * @out_fence: Optional pointer to a fence pointer. If non-NULL, a
  * ref-counted fence pointer is returned here.
  */
-void vmw_kms_helper_resource_finish(struct vmw_resource *res,
-			     struct vmw_fence_obj **out_fence)
+void vmw_kms_helper_resource_finish(struct vmw_validation_ctx *ctx,
+				    struct vmw_fence_obj **out_fence)
 {
-	if (res->backup || out_fence)
-		vmw_kms_helper_buffer_finish(res->dev_priv, NULL, res->backup,
+	struct vmw_resource *res = ctx->res;
+
+	if (ctx->buf || out_fence)
+		vmw_kms_helper_buffer_finish(res->dev_priv, NULL, ctx->buf,
 					     out_fence, NULL);
 
 	vmw_resource_unreserve(res, false, NULL, 0);
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h
@@ -183,6 +183,11 @@ struct vmw_display_unit {
 	int set_gui_y;
 };
 
+struct vmw_validation_ctx {
+	struct vmw_resource *res;
+	struct vmw_dma_buffer *buf;
+};
+
 #define vmw_crtc_to_du(x) \
 	container_of(x, struct vmw_display_unit, crtc)
 #define vmw_connector_to_du(x) \
@@ -233,9 +238,10 @@ void vmw_kms_helper_buffer_finish(struct
 				  struct drm_vmw_fence_rep __user *
 				  user_fence_rep);
 int vmw_kms_helper_resource_prepare(struct vmw_resource *res,
-				    bool interruptible);
-void vmw_kms_helper_resource_revert(struct vmw_resource *res);
-void vmw_kms_helper_resource_finish(struct vmw_resource *res,
+				    bool interruptible,
+				    struct vmw_validation_ctx *ctx);
+void vmw_kms_helper_resource_revert(struct vmw_validation_ctx *ctx);
+void vmw_kms_helper_resource_finish(struct vmw_validation_ctx *ctx,
 				    struct vmw_fence_obj **out_fence);
 int vmw_kms_readback(struct vmw_private *dev_priv,
 		     struct drm_file *file_priv,
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c
@@ -753,12 +753,13 @@ int vmw_kms_sou_do_surface_dirty(struct
 	struct vmw_framebuffer_surface *vfbs =
 		container_of(framebuffer, typeof(*vfbs), base);
 	struct vmw_kms_sou_surface_dirty sdirty;
+	struct vmw_validation_ctx ctx;
 	int ret;
 
 	if (!srf)
 		srf = &vfbs->surface->res;
 
-	ret = vmw_kms_helper_resource_prepare(srf, true);
+	ret = vmw_kms_helper_resource_prepare(srf, true, &ctx);
 	if (ret)
 		return ret;
 
@@ -777,7 +778,7 @@ int vmw_kms_sou_do_surface_dirty(struct
 	ret = vmw_kms_helper_dirty(dev_priv, framebuffer, clips, vclips,
 				   dest_x, dest_y, num_clips, inc,
 				   &sdirty.base);
-	vmw_kms_helper_resource_finish(srf, out_fence);
+	vmw_kms_helper_resource_finish(&ctx, out_fence);
 
 	return ret;
 }
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c
@@ -977,12 +977,13 @@ int vmw_kms_stdu_surface_dirty(struct vm
 	struct vmw_framebuffer_surface *vfbs =
 		container_of(framebuffer, typeof(*vfbs), base);
 	struct vmw_stdu_dirty sdirty;
+	struct vmw_validation_ctx ctx;
 	int ret;
 
 	if (!srf)
 		srf = &vfbs->surface->res;
 
-	ret = vmw_kms_helper_resource_prepare(srf, true);
+	ret = vmw_kms_helper_resource_prepare(srf, true, &ctx);
 	if (ret)
 		return ret;
 
@@ -1005,7 +1006,7 @@ int vmw_kms_stdu_surface_dirty(struct vm
 				   dest_x, dest_y, num_clips, inc,
 				   &sdirty.base);
 out_finish:
-	vmw_kms_helper_resource_finish(srf, out_fence);
+	vmw_kms_helper_resource_finish(&ctx, out_fence);
 
 	return ret;
 }

[PATCH 4.9 30/67] drm/radeon: Dont turn off DP sink when disconnected

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michel Dänzer <michel.daenzer@amd.com>

commit 2681bc79eeb640562c932007bfebbbdc55bf6a7d upstream.

Turning off the sink in this case causes various issues, because
userspace expects it to stay on until it turns it off explicitly.

Instead, turn the sink off and back on when a display is connected
again. This dance seems necessary for link training to work correctly.

Bugzilla: https://bugs.freedesktop.org/105308
Cc: stable@vger.kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/radeon_connectors.c |   29 +++++++++++------------------
 1 file changed, 11 insertions(+), 18 deletions(-)

--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -90,25 +90,18 @@ void radeon_connector_hotplug(struct drm
 		/* don't do anything if sink is not display port, i.e.,
 		 * passive dp->(dvi|hdmi) adaptor
 		 */
-		if (dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) {
-			int saved_dpms = connector->dpms;
-			/* Only turn off the display if it's physically disconnected */
-			if (!radeon_hpd_sense(rdev, radeon_connector->hpd.hpd)) {
-				drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF);
-			} else if (radeon_dp_needs_link_train(radeon_connector)) {
-				/* Don't try to start link training before we
-				 * have the dpcd */
-				if (!radeon_dp_getdpcd(radeon_connector))
-					return;
+		if (dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT &&
+		    radeon_hpd_sense(rdev, radeon_connector->hpd.hpd) &&
+		    radeon_dp_needs_link_train(radeon_connector)) {
+			/* Don't start link training before we have the DPCD */
+			if (!radeon_dp_getdpcd(radeon_connector))
+				return;
 
-				/* set it to OFF so that drm_helper_connector_dpms()
-				 * won't return immediately since the current state
-				 * is ON at this point.
-				 */
-				connector->dpms = DRM_MODE_DPMS_OFF;
-				drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
-			}
-			connector->dpms = saved_dpms;
+			/* Turn the connector off and back on immediately, which
+			 * will trigger link training
+			 */
+			drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF);
+			drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
 		}
 	}
 }

[PATCH 4.9 31/67] drm: udl: Properly check framebuffer mmap offsets

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3b82a4db8eaccce735dffd50b4d4e1578099b8e8 upstream.

The memmap options sent to the udl framebuffer driver were not being
checked for all sets of possible crazy values.  Fix this up by properly
bounding the allowed values.

Reported-by: Eyal Itkin <eyalit@checkpoint.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180321154553.GA18454@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/udl/udl_fb.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/udl/udl_fb.c
+++ b/drivers/gpu/drm/udl/udl_fb.c
@@ -158,10 +158,15 @@ static int udl_fb_mmap(struct fb_info *i
 {
 	unsigned long start = vma->vm_start;
 	unsigned long size = vma->vm_end - vma->vm_start;
-	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+	unsigned long offset;
 	unsigned long page, pos;
 
-	if (offset + size > info->fix.smem_len)
+	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
+		return -EINVAL;
+
+	offset = vma->vm_pgoff << PAGE_SHIFT;
+
+	if (offset > info->fix.smem_len || size > info->fix.smem_len - offset)
 		return -EINVAL;
 
 	pos = (unsigned long)info->fix.smem_start + offset;

[PATCH 4.9 32/67] acpi, numa: fix pxm to online numa node associations

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Williams <dan.j.williams@intel.com>

commit dc9e0a9347e932e3fd3cd03e7ff241022ed6ea8a upstream.

Commit 99759869faf1 "acpi: Add acpi_map_pxm_to_online_node()" added
support for mapping a given proximity to its nearest, by SLIT distance,
online node. However, it sometimes returns unexpected results due to the
fact that it switches from comparing the PXM node to the last node that
was closer than the current max.

    for_each_online_node(n) {
            dist = node_distance(node, n);
            if (dist < min_dist) {
                    min_dist = dist;
                    node = n;	<---- from this point we're using the
				      wrong node for node_distance()


Fixes: 99759869faf1 ("acpi: Add acpi_map_pxm_to_online_node()")
Cc: <stable@vger.kernel.org>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/numa.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/acpi/numa.c
+++ b/drivers/acpi/numa.c
@@ -103,25 +103,27 @@ int acpi_map_pxm_to_node(int pxm)
  */
 int acpi_map_pxm_to_online_node(int pxm)
 {
-	int node, n, dist, min_dist;
+	int node, min_node;
 
 	node = acpi_map_pxm_to_node(pxm);
 
 	if (node == NUMA_NO_NODE)
 		node = 0;
 
+	min_node = node;
 	if (!node_online(node)) {
-		min_dist = INT_MAX;
+		int min_dist = INT_MAX, dist, n;
+
 		for_each_online_node(n) {
 			dist = node_distance(node, n);
 			if (dist < min_dist) {
 				min_dist = dist;
-				node = n;
+				min_node = n;
 			}
 		}
 	}
 
-	return node;
+	return min_node;
 }
 EXPORT_SYMBOL(acpi_map_pxm_to_online_node);
 

[PATCH 4.9 33/67] ACPI / watchdog: Fix off-by-one error at resource assignment

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit b1abf6fc49829d89660c961fafe3f90f3d843c55 upstream.

The resource allocation in WDAT watchdog has off-one-by error, it sets
one byte more than the actual end address.  This may eventually lead
to unexpected resource conflicts.

Fixes: 058dfc767008 (ACPI / watchdog: Add support for WDAT hardware watchdog)
Cc: 4.9+ <stable@vger.kernel.org> # 4.9+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/acpi_watchdog.c |    4 ++--
 drivers/watchdog/wdat_wdt.c  |    2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/acpi/acpi_watchdog.c
+++ b/drivers/acpi/acpi_watchdog.c
@@ -74,10 +74,10 @@ void __init acpi_watchdog_init(void)
 		res.start = gas->address;
 		if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
 			res.flags = IORESOURCE_MEM;
-			res.end = res.start + ALIGN(gas->access_width, 4);
+			res.end = res.start + ALIGN(gas->access_width, 4) - 1;
 		} else if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
 			res.flags = IORESOURCE_IO;
-			res.end = res.start + gas->access_width;
+			res.end = res.start + gas->access_width - 1;
 		} else {
 			pr_warn("Unsupported address space: %u\n",
 				gas->space_id);
--- a/drivers/watchdog/wdat_wdt.c
+++ b/drivers/watchdog/wdat_wdt.c
@@ -392,7 +392,7 @@ static int wdat_wdt_probe(struct platfor
 
 		memset(&r, 0, sizeof(r));
 		r.start = gas->address;
-		r.end = r.start + gas->access_width;
+		r.end = r.start + gas->access_width - 1;
 		if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
 			r.flags = IORESOURCE_MEM;
 		} else if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {

[PATCH 4.9 34/67] libnvdimm, {btt, blk}: do integrity setup before add_disk()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vishal Verma <vishal.l.verma@intel.com>

commit 3ffb0ba9b567a8efb9a04ed3d1ec15ff333ada22 upstream.

Prior to 25520d55cdb6 ("block: Inline blk_integrity in struct gendisk")
we needed to temporarily add a zero-capacity disk before registering for
blk-integrity. But adding a zero-capacity disk caused the partition
table scanning to bail early, and this resulted in partitions not coming
up after a probe of the BTT or blk namespaces.

We can now register for integrity before the disk has been added, and
this fixes the rescan problems.

Fixes: 25520d55cdb6 ("block: Inline blk_integrity in struct gendisk")
Reported-by: Dariusz Dokupil <dariusz.dokupil@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/nvdimm/blk.c |    3 +--
 drivers/nvdimm/btt.c |    3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/nvdimm/blk.c
+++ b/drivers/nvdimm/blk.c
@@ -286,8 +286,6 @@ static int nsblk_attach_disk(struct nd_n
 	disk->queue		= q;
 	disk->flags		= GENHD_FL_EXT_DEVT;
 	nvdimm_namespace_disk_name(&nsblk->common, disk->disk_name);
-	set_capacity(disk, 0);
-	device_add_disk(dev, disk);
 
 	if (devm_add_action_or_reset(dev, nd_blk_release_disk, disk))
 		return -ENOMEM;
@@ -300,6 +298,7 @@ static int nsblk_attach_disk(struct nd_n
 	}
 
 	set_capacity(disk, available_disk_size >> SECTOR_SHIFT);
+	device_add_disk(dev, disk);
 	revalidate_disk(disk);
 	return 0;
 }
--- a/drivers/nvdimm/btt.c
+++ b/drivers/nvdimm/btt.c
@@ -1392,8 +1392,6 @@ static int btt_blk_init(struct btt *btt)
 	queue_flag_set_unlocked(QUEUE_FLAG_NONROT, btt->btt_queue);
 	btt->btt_queue->queuedata = btt;
 
-	set_capacity(btt->btt_disk, 0);
-	device_add_disk(&btt->nd_btt->dev, btt->btt_disk);
 	if (btt_meta_size(btt)) {
 		int rc = nd_integrity_init(btt->btt_disk, btt_meta_size(btt));
 
@@ -1405,6 +1403,7 @@ static int btt_blk_init(struct btt *btt)
 		}
 	}
 	set_capacity(btt->btt_disk, btt->nlba * btt->sector_size >> 9);
+	device_add_disk(&btt->nd_btt->dev, btt->btt_disk);
 	btt->nd_btt->size = btt->nlba * (u64)btt->sector_size;
 	revalidate_disk(btt->btt_disk);
 

[PATCH 4.9 35/67] brcmfmac: fix P2P_DEVICE ethernet address generation

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arend Van Spriel <arend.vanspriel@broadcom.com>

commit 455f3e76cfc0d893585a5f358b9ddbe9c1e1e53b upstream.

The firmware has a requirement that the P2P_DEVICE address should
be different from the address of the primary interface. When not
specified by user-space, the driver generates the MAC address for
the P2P_DEVICE interface using the MAC address of the primary
interface and setting the locally administered bit. However, the MAC
address of the primary interface may already have that bit set causing
the creation of the P2P_DEVICE interface to fail with -EBUSY. Fix this
by using a random address instead to determine the P2P_DEVICE address.

Cc: stable@vger.kernel.org # 3.10.y
Reported-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c |   24 +++++++----------
 1 file changed, 11 insertions(+), 13 deletions(-)

--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
@@ -462,25 +462,23 @@ static int brcmf_p2p_set_firmware(struct
  * @dev_addr: optional device address.
  *
  * P2P needs mac addresses for P2P device and interface. If no device
- * address it specified, these are derived from the primary net device, ie.
- * the permanent ethernet address of the device.
+ * address it specified, these are derived from a random ethernet
+ * address.
  */
 static void brcmf_p2p_generate_bss_mac(struct brcmf_p2p_info *p2p, u8 *dev_addr)
 {
-	struct brcmf_if *pri_ifp = p2p->bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp;
-	bool local_admin = false;
+	bool random_addr = false;
 
-	if (!dev_addr || is_zero_ether_addr(dev_addr)) {
-		dev_addr = pri_ifp->mac_addr;
-		local_admin = true;
-	}
+	if (!dev_addr || is_zero_ether_addr(dev_addr))
+		random_addr = true;
 
-	/* Generate the P2P Device Address.  This consists of the device's
-	 * primary MAC address with the locally administered bit set.
+	/* Generate the P2P Device Address obtaining a random ethernet
+	 * address with the locally administered bit set.
 	 */
-	memcpy(p2p->dev_addr, dev_addr, ETH_ALEN);
-	if (local_admin)
-		p2p->dev_addr[0] |= 0x02;
+	if (random_addr)
+		eth_random_addr(p2p->dev_addr);
+	else
+		memcpy(p2p->dev_addr, dev_addr, ETH_ALEN);
 
 	/* Generate the P2P Interface Address.  If the discovery and connection
 	 * BSSCFGs need to simultaneously co-exist, then this address must be

[PATCH 4.9 36/67] rtlwifi: rtl8723be: Fix loss of signal

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Larry Finger <Larry.Finger@lwfinger.net>

commit 78dc897b7ee67205423dbbc6b56be49fb18d15b5 upstream.

In commit c713fb071edc ("rtlwifi: rtl8821ae: Fix connection lost problem
correctly") a problem in rtl8821ae that caused loss of signal was fixed.
That same problem has now been reported for rtl8723be. Accordingly,
the ASPM L1 latency has been increased from 0 to 7 to fix the instability.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Tested-by: James Cameron <quozl@laptop.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
@@ -1125,7 +1125,8 @@ static void _rtl8723be_enable_aspm_back_
 
 	/* Configuration Space offset 0x70f BIT7 is used to control L0S */
 	tmp8 = _rtl8723be_dbi_read(rtlpriv, 0x70f);
-	_rtl8723be_dbi_write(rtlpriv, 0x70f, tmp8 | BIT(7));
+	_rtl8723be_dbi_write(rtlpriv, 0x70f, tmp8 | BIT(7) |
+			     ASPM_L1_LATENCY << 3);
 
 	/* Configuration Space offset 0x719 Bit3 is for L1
 	 * BIT4 is for clock request

[PATCH 4.9 37/67] tracing: probeevent: Fix to support minus offset from symbol

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Masami Hiramatsu <mhiramat@kernel.org>

commit c5d343b6b7badd1f5fe0873eff2e8d63a193e732 upstream.

In Documentation/trace/kprobetrace.txt, it says

 @SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol)

However, the parser doesn't parse minus offset correctly, since
commit 2fba0c8867af ("tracing/kprobes: Fix probe offset to be
unsigned") drops minus ("-") offset support for kprobe probe
address usage.

This fixes the traceprobe_split_symbol_offset() to parse minus
offset again with checking the offset range, and add a minus
offset check in kprobe probe address usage.

Link: http://lkml.kernel.org/r/152129028983.31874.13419301530285775521.stgit@devbox

Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Fixes: 2fba0c8867af ("tracing/kprobes: Fix probe offset to be unsigned")
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/trace_kprobe.c |    4 ++--
 kernel/trace/trace_probe.c  |    8 +++-----
 kernel/trace/trace_probe.h  |    2 +-
 3 files changed, 6 insertions(+), 8 deletions(-)

--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -607,7 +607,7 @@ static int create_trace_kprobe(int argc,
 	bool is_return = false, is_delete = false;
 	char *symbol = NULL, *event = NULL, *group = NULL;
 	char *arg;
-	unsigned long offset = 0;
+	long offset = 0;
 	void *addr = NULL;
 	char buf[MAX_EVENT_NAME_LEN];
 
@@ -675,7 +675,7 @@ static int create_trace_kprobe(int argc,
 		symbol = argv[1];
 		/* TODO: support .init module functions */
 		ret = traceprobe_split_symbol_offset(symbol, &offset);
-		if (ret) {
+		if (ret || offset < 0 || offset > UINT_MAX) {
 			pr_info("Failed to parse either an address or a symbol.\n");
 			return ret;
 		}
--- a/kernel/trace/trace_probe.c
+++ b/kernel/trace/trace_probe.c
@@ -319,7 +319,7 @@ static fetch_func_t get_fetch_size_funct
 }
 
 /* Split symbol and offset. */
-int traceprobe_split_symbol_offset(char *symbol, unsigned long *offset)
+int traceprobe_split_symbol_offset(char *symbol, long *offset)
 {
 	char *tmp;
 	int ret;
@@ -327,13 +327,11 @@ int traceprobe_split_symbol_offset(char
 	if (!offset)
 		return -EINVAL;
 
-	tmp = strchr(symbol, '+');
+	tmp = strpbrk(symbol, "+-");
 	if (tmp) {
-		/* skip sign because kstrtoul doesn't accept '+' */
-		ret = kstrtoul(tmp + 1, 0, offset);
+		ret = kstrtol(tmp, 0, offset);
 		if (ret)
 			return ret;
-
 		*tmp = '\0';
 	} else
 		*offset = 0;
--- a/kernel/trace/trace_probe.h
+++ b/kernel/trace/trace_probe.h
@@ -354,7 +354,7 @@ extern int traceprobe_conflict_field_nam
 extern void traceprobe_update_arg(struct probe_arg *arg);
 extern void traceprobe_free_probe_arg(struct probe_arg *arg);
 
-extern int traceprobe_split_symbol_offset(char *symbol, unsigned long *offset);
+extern int traceprobe_split_symbol_offset(char *symbol, long *offset);
 
 extern ssize_t traceprobe_probes_write(struct file *file,
 		const char __user *buffer, size_t count, loff_t *ppos,

[PATCH 4.9 38/67] mtdchar: fix usage of mtd_ooblayout_ecc()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: OuYang ZhiZhong <ouyzz@yealink.com>

commit 6de564939e14327148e31ddcf769e34105176447 upstream.

Section was not properly computed. The value of OOB region definition is
always ECC section 0 information in the OOB area, but we want to get all
the ECC bytes information, so we should call
mtd_ooblayout_ecc(mtd, section++, &oobregion) until it returns -ERANGE.

Fixes: c2b78452a9db ("mtd: use mtd_ooblayout_xxx() helpers where appropriate")
Cc: <stable@vger.kernel.org>
Signed-off-by: OuYang ZhiZhong <ouyzz@yealink.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/mtdchar.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -487,7 +487,7 @@ static int shrink_ecclayout(struct mtd_i
 	for (i = 0; i < MTD_MAX_ECCPOS_ENTRIES;) {
 		u32 eccpos;
 
-		ret = mtd_ooblayout_ecc(mtd, section, &oobregion);
+		ret = mtd_ooblayout_ecc(mtd, section++, &oobregion);
 		if (ret < 0) {
 			if (ret != -ERANGE)
 				return ret;
@@ -534,7 +534,7 @@ static int get_oobinfo(struct mtd_info *
 	for (i = 0; i < ARRAY_SIZE(to->eccpos);) {
 		u32 eccpos;
 
-		ret = mtd_ooblayout_ecc(mtd, section, &oobregion);
+		ret = mtd_ooblayout_ecc(mtd, section++, &oobregion);
 		if (ret < 0) {
 			if (ret != -ERANGE)
 				return ret;

[PATCH 4.9 39/67] mtd: nand: fsl_ifc: Fix nand waitfunc return value

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jagdish Gediya <jagdish.gediya@nxp.com>

commit fa8e6d58c5bc260f4369c6699683d69695daed0a upstream.

As per the IFC hardware manual, Most significant 2 bytes in
nand_fsr register are the outcome of NAND READ STATUS command.

So status value need to be shifted and aligned as per the nand
framework requirement.

Fixes: 82771882d960 ("NAND Machine support for Integrated Flash Controller")
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/fsl_ifc_nand.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -656,6 +656,7 @@ static int fsl_ifc_wait(struct mtd_info
 	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
 	struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs;
 	u32 nand_fsr;
+	int status;
 
 	/* Use READ_STATUS command, but wait for the device to be ready */
 	ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
@@ -670,12 +671,12 @@ static int fsl_ifc_wait(struct mtd_info
 	fsl_ifc_run_command(mtd);
 
 	nand_fsr = ifc_in32(&ifc->ifc_nand.nand_fsr);
-
+	status = nand_fsr >> 24;
 	/*
 	 * The chip always seems to report that it is
 	 * write-protected, even when it is not.
 	 */
-	return nand_fsr | NAND_STATUS_WP;
+	return status | NAND_STATUS_WP;
 }
 
 static int fsl_ifc_read_page(struct mtd_info *mtd, struct nand_chip *chip,

[PATCH 4.9 40/67] mtd: nand: fsl_ifc: Fix eccstat array overflow for IFC ver >= 2.0.0

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jagdish Gediya <jagdish.gediya@nxp.com>

commit 843c3a59997f18060848b8632607dd04781b52d1 upstream.

Number of ECC status registers i.e. (ECCSTATx) has been increased in IFC
version 2.0.0 due to increase in SRAM size. This is causing eccstat
array to over flow.

So, replace eccstat array with u32 variable to make it fail-safe and
independent of number of ECC status registers or SRAM size.

Fixes: bccb06c353af ("mtd: nand: ifc: update bufnum mask for ver >= 2.0.0")
Cc: stable@vger.kernel.org # 3.18+
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/fsl_ifc_nand.c |   23 ++++++++++-------------
 1 file changed, 10 insertions(+), 13 deletions(-)

--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -201,14 +201,9 @@ static int is_blank(struct mtd_info *mtd
 
 /* returns nonzero if entire page is blank */
 static int check_read_ecc(struct mtd_info *mtd, struct fsl_ifc_ctrl *ctrl,
-			  u32 *eccstat, unsigned int bufnum)
+			  u32 eccstat, unsigned int bufnum)
 {
-	u32 reg = eccstat[bufnum / 4];
-	int errors;
-
-	errors = (reg >> ((3 - bufnum % 4) * 8)) & 15;
-
-	return errors;
+	return  (eccstat >> ((3 - bufnum % 4) * 8)) & 15;
 }
 
 /*
@@ -221,7 +216,7 @@ static void fsl_ifc_run_command(struct m
 	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
 	struct fsl_ifc_nand_ctrl *nctrl = ifc_nand_ctrl;
 	struct fsl_ifc_runtime __iomem *ifc = ctrl->rregs;
-	u32 eccstat[4];
+	u32 eccstat;
 	int i;
 
 	/* set the chip select for NAND Transaction */
@@ -256,8 +251,8 @@ static void fsl_ifc_run_command(struct m
 	if (nctrl->eccread) {
 		int errors;
 		int bufnum = nctrl->page & priv->bufnum_mask;
-		int sector = bufnum * chip->ecc.steps;
-		int sector_end = sector + chip->ecc.steps - 1;
+		int sector_start = bufnum * chip->ecc.steps;
+		int sector_end = sector_start + chip->ecc.steps - 1;
 		__be32 *eccstat_regs;
 
 		if (ctrl->version >= FSL_IFC_VERSION_2_0_0)
@@ -265,10 +260,12 @@ static void fsl_ifc_run_command(struct m
 		else
 			eccstat_regs = ifc->ifc_nand.v1_nand_eccstat;
 
-		for (i = sector / 4; i <= sector_end / 4; i++)
-			eccstat[i] = ifc_in32(&eccstat_regs[i]);
+		eccstat = ifc_in32(&eccstat_regs[sector_start / 4]);
+
+		for (i = sector_start; i <= sector_end; i++) {
+			if (i != sector_start && !(i % 4))
+				eccstat = ifc_in32(&eccstat_regs[i / 4]);
 
-		for (i = sector; i <= sector_end; i++) {
 			errors = check_read_ecc(mtd, ctrl, eccstat, i);
 
 			if (errors == 15) {

[PATCH 4.9 41/67] mtd: nand: fsl_ifc: Read ECCSTAT0 and ECCSTAT1 registers for IFC 2.0

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jagdish Gediya <jagdish.gediya@nxp.com>

commit 6b00c35138b404be98b85f4a703be594cbed501c upstream.

Due to missing information in Hardware manual, current
implementation doesn't read ECCSTAT0 and ECCSTAT1 registers
for IFC 2.0.

Add support to read ECCSTAT0 and ECCSTAT1 registers during
ecccheck for IFC 2.0.

Fixes: 656441478ed5 ("mtd: nand: ifc: Fix location of eccstat registers for IFC V1.0")
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/fsl_ifc_nand.c |    6 +-----
 include/linux/fsl_ifc.h         |    6 +-----
 2 files changed, 2 insertions(+), 10 deletions(-)

--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -255,11 +255,7 @@ static void fsl_ifc_run_command(struct m
 		int sector_end = sector_start + chip->ecc.steps - 1;
 		__be32 *eccstat_regs;
 
-		if (ctrl->version >= FSL_IFC_VERSION_2_0_0)
-			eccstat_regs = ifc->ifc_nand.v2_nand_eccstat;
-		else
-			eccstat_regs = ifc->ifc_nand.v1_nand_eccstat;
-
+		eccstat_regs = ifc->ifc_nand.nand_eccstat;
 		eccstat = ifc_in32(&eccstat_regs[sector_start / 4]);
 
 		for (i = sector_start; i <= sector_end; i++) {
--- a/include/linux/fsl_ifc.h
+++ b/include/linux/fsl_ifc.h
@@ -734,11 +734,7 @@ struct fsl_ifc_nand {
 	u32 res19[0x10];
 	__be32 nand_fsr;
 	u32 res20;
-	/* The V1 nand_eccstat is actually 4 words that overlaps the
-	 * V2 nand_eccstat.
-	 */
-	__be32 v1_nand_eccstat[2];
-	__be32 v2_nand_eccstat[6];
+	__be32 nand_eccstat[8];
 	u32 res21[0x1c];
 	__be32 nanndcr;
 	u32 res22[0x2];

[PATCH 4.9 42/67] staging: ncpfs: memory corruption in ncp_read_kernel()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 4c41aa24baa4ed338241d05494f2c595c885af8f upstream.

If the server is malicious then *bytes_read could be larger than the
size of the "target" buffer.  It would lead to memory corruption when we
do the memcpy().

Reported-by: Dr Silvio Cesare of InfoSect <Silvio Cesare <silvio.cesare@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ncpfs/ncplib_kernel.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/fs/ncpfs/ncplib_kernel.c
+++ b/fs/ncpfs/ncplib_kernel.c
@@ -980,6 +980,10 @@ ncp_read_kernel(struct ncp_server *serve
 		goto out;
 	}
 	*bytes_read = ncp_reply_be16(server, 0);
+	if (*bytes_read > to_read) {
+		result = -EINVAL;
+		goto out;
+	}
 	source = ncp_reply_data(server, 2 + (offset & 1));
 
 	memcpy(target, source, *bytes_read);

[PATCH 4.9 43/67] can: ifi: Repair the error handling

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Vasut <marex@denx.de>

commit 880dd464b4304583c557c4e5f5ecebfd55d232b1 upstream.

The new version of the IFI CANFD core has significantly less complex
error state indication logic. In particular, the warning/error state
bits are no longer all over the place, but are all present in the
STATUS register. Moreover, there is a new IRQ register bit indicating
transition between error states (active/warning/passive/busoff).

This patch makes use of this bit to weed out the obscure selective
INTERRUPT register clearing, which was used to carry over the error
state indication into the poll function. While at it, this patch
fixes the handling of the ACTIVE state, since the hardware provides
indication of the core being in ACTIVE state and that in turn fixes
the state transition indication toward userspace. Finally, register
reads in the poll function are moved to the matching subfunctions
since those are also no longer needed in the poll function.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Markus Marb <markus@marb.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/ifi_canfd/ifi_canfd.c |   64 +++++++++++++++++++---------------
 1 file changed, 37 insertions(+), 27 deletions(-)

--- a/drivers/net/can/ifi_canfd/ifi_canfd.c
+++ b/drivers/net/can/ifi_canfd/ifi_canfd.c
@@ -30,6 +30,7 @@
 #define IFI_CANFD_STCMD_ERROR_ACTIVE		BIT(2)
 #define IFI_CANFD_STCMD_ERROR_PASSIVE		BIT(3)
 #define IFI_CANFD_STCMD_BUSOFF			BIT(4)
+#define IFI_CANFD_STCMD_ERROR_WARNING		BIT(5)
 #define IFI_CANFD_STCMD_BUSMONITOR		BIT(16)
 #define IFI_CANFD_STCMD_LOOPBACK		BIT(18)
 #define IFI_CANFD_STCMD_DISABLE_CANFD		BIT(24)
@@ -52,7 +53,10 @@
 #define IFI_CANFD_TXSTCMD_OVERFLOW		BIT(13)
 
 #define IFI_CANFD_INTERRUPT			0xc
+#define IFI_CANFD_INTERRUPT_ERROR_BUSOFF	BIT(0)
 #define IFI_CANFD_INTERRUPT_ERROR_WARNING	BIT(1)
+#define IFI_CANFD_INTERRUPT_ERROR_STATE_CHG	BIT(2)
+#define IFI_CANFD_INTERRUPT_ERROR_REC_TEC_INC	BIT(3)
 #define IFI_CANFD_INTERRUPT_ERROR_COUNTER	BIT(10)
 #define IFI_CANFD_INTERRUPT_TXFIFO_EMPTY	BIT(16)
 #define IFI_CANFD_INTERRUPT_TXFIFO_REMOVE	BIT(22)
@@ -61,6 +65,10 @@
 #define IFI_CANFD_INTERRUPT_SET_IRQ		((u32)BIT(31))
 
 #define IFI_CANFD_IRQMASK			0x10
+#define IFI_CANFD_IRQMASK_ERROR_BUSOFF		BIT(0)
+#define IFI_CANFD_IRQMASK_ERROR_WARNING		BIT(1)
+#define IFI_CANFD_IRQMASK_ERROR_STATE_CHG	BIT(2)
+#define IFI_CANFD_IRQMASK_ERROR_REC_TEC_INC	BIT(3)
 #define IFI_CANFD_IRQMASK_SET_ERR		BIT(7)
 #define IFI_CANFD_IRQMASK_SET_TS		BIT(15)
 #define IFI_CANFD_IRQMASK_TXFIFO_EMPTY		BIT(16)
@@ -220,7 +228,10 @@ static void ifi_canfd_irq_enable(struct
 
 	if (enable) {
 		enirq = IFI_CANFD_IRQMASK_TXFIFO_EMPTY |
-			IFI_CANFD_IRQMASK_RXFIFO_NEMPTY;
+			IFI_CANFD_IRQMASK_RXFIFO_NEMPTY |
+			IFI_CANFD_IRQMASK_ERROR_STATE_CHG |
+			IFI_CANFD_IRQMASK_ERROR_WARNING |
+			IFI_CANFD_IRQMASK_ERROR_BUSOFF;
 		if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
 			enirq |= IFI_CANFD_INTERRUPT_ERROR_COUNTER;
 	}
@@ -361,12 +372,13 @@ static int ifi_canfd_handle_lost_msg(str
 	return 1;
 }
 
-static int ifi_canfd_handle_lec_err(struct net_device *ndev, const u32 errctr)
+static int ifi_canfd_handle_lec_err(struct net_device *ndev)
 {
 	struct ifi_canfd_priv *priv = netdev_priv(ndev);
 	struct net_device_stats *stats = &ndev->stats;
 	struct can_frame *cf;
 	struct sk_buff *skb;
+	u32 errctr = readl(priv->base + IFI_CANFD_ERROR_CTR);
 	const u32 errmask = IFI_CANFD_ERROR_CTR_OVERLOAD_FIRST |
 			    IFI_CANFD_ERROR_CTR_ACK_ERROR_FIRST |
 			    IFI_CANFD_ERROR_CTR_BIT0_ERROR_FIRST |
@@ -449,6 +461,11 @@ static int ifi_canfd_handle_state_change
 
 	switch (new_state) {
 	case CAN_STATE_ERROR_ACTIVE:
+		/* error active state */
+		priv->can.can_stats.error_warning++;
+		priv->can.state = CAN_STATE_ERROR_ACTIVE;
+		break;
+	case CAN_STATE_ERROR_WARNING:
 		/* error warning state */
 		priv->can.can_stats.error_warning++;
 		priv->can.state = CAN_STATE_ERROR_WARNING;
@@ -477,7 +494,7 @@ static int ifi_canfd_handle_state_change
 	ifi_canfd_get_berr_counter(ndev, &bec);
 
 	switch (new_state) {
-	case CAN_STATE_ERROR_ACTIVE:
+	case CAN_STATE_ERROR_WARNING:
 		/* error warning state */
 		cf->can_id |= CAN_ERR_CRTL;
 		cf->data[1] = (bec.txerr > bec.rxerr) ?
@@ -510,22 +527,21 @@ static int ifi_canfd_handle_state_change
 	return 1;
 }
 
-static int ifi_canfd_handle_state_errors(struct net_device *ndev, u32 stcmd)
+static int ifi_canfd_handle_state_errors(struct net_device *ndev)
 {
 	struct ifi_canfd_priv *priv = netdev_priv(ndev);
+	u32 stcmd = readl(priv->base + IFI_CANFD_STCMD);
 	int work_done = 0;
-	u32 isr;
 
-	/*
-	 * The ErrWarn condition is a little special, since the bit is
-	 * located in the INTERRUPT register instead of STCMD register.
-	 */
-	isr = readl(priv->base + IFI_CANFD_INTERRUPT);
-	if ((isr & IFI_CANFD_INTERRUPT_ERROR_WARNING) &&
+	if ((stcmd & IFI_CANFD_STCMD_ERROR_ACTIVE) &&
+	    (priv->can.state != CAN_STATE_ERROR_ACTIVE)) {
+		netdev_dbg(ndev, "Error, entered active state\n");
+		work_done += ifi_canfd_handle_state_change(ndev,
+						CAN_STATE_ERROR_ACTIVE);
+	}
+
+	if ((stcmd & IFI_CANFD_STCMD_ERROR_WARNING) &&
 	    (priv->can.state != CAN_STATE_ERROR_WARNING)) {
-		/* Clear the interrupt */
-		writel(IFI_CANFD_INTERRUPT_ERROR_WARNING,
-		       priv->base + IFI_CANFD_INTERRUPT);
 		netdev_dbg(ndev, "Error, entered warning state\n");
 		work_done += ifi_canfd_handle_state_change(ndev,
 						CAN_STATE_ERROR_WARNING);
@@ -552,18 +568,11 @@ static int ifi_canfd_poll(struct napi_st
 {
 	struct net_device *ndev = napi->dev;
 	struct ifi_canfd_priv *priv = netdev_priv(ndev);
-	const u32 stcmd_state_mask = IFI_CANFD_STCMD_ERROR_PASSIVE |
-				     IFI_CANFD_STCMD_BUSOFF;
-	int work_done = 0;
-
-	u32 stcmd = readl(priv->base + IFI_CANFD_STCMD);
 	u32 rxstcmd = readl(priv->base + IFI_CANFD_RXSTCMD);
-	u32 errctr = readl(priv->base + IFI_CANFD_ERROR_CTR);
+	int work_done = 0;
 
 	/* Handle bus state changes */
-	if ((stcmd & stcmd_state_mask) ||
-	    ((stcmd & IFI_CANFD_STCMD_ERROR_ACTIVE) == 0))
-		work_done += ifi_canfd_handle_state_errors(ndev, stcmd);
+	work_done += ifi_canfd_handle_state_errors(ndev);
 
 	/* Handle lost messages on RX */
 	if (rxstcmd & IFI_CANFD_RXSTCMD_OVERFLOW)
@@ -571,7 +580,7 @@ static int ifi_canfd_poll(struct napi_st
 
 	/* Handle lec errors on the bus */
 	if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
-		work_done += ifi_canfd_handle_lec_err(ndev, errctr);
+		work_done += ifi_canfd_handle_lec_err(ndev);
 
 	/* Handle normal messages on RX */
 	if (!(rxstcmd & IFI_CANFD_RXSTCMD_EMPTY))
@@ -592,12 +601,13 @@ static irqreturn_t ifi_canfd_isr(int irq
 	struct net_device_stats *stats = &ndev->stats;
 	const u32 rx_irq_mask = IFI_CANFD_INTERRUPT_RXFIFO_NEMPTY |
 				IFI_CANFD_INTERRUPT_RXFIFO_NEMPTY_PER |
+				IFI_CANFD_INTERRUPT_ERROR_COUNTER |
+				IFI_CANFD_INTERRUPT_ERROR_STATE_CHG |
 				IFI_CANFD_INTERRUPT_ERROR_WARNING |
-				IFI_CANFD_INTERRUPT_ERROR_COUNTER;
+				IFI_CANFD_INTERRUPT_ERROR_BUSOFF;
 	const u32 tx_irq_mask = IFI_CANFD_INTERRUPT_TXFIFO_EMPTY |
 				IFI_CANFD_INTERRUPT_TXFIFO_REMOVE;
-	const u32 clr_irq_mask = ~((u32)(IFI_CANFD_INTERRUPT_SET_IRQ |
-					 IFI_CANFD_INTERRUPT_ERROR_WARNING));
+	const u32 clr_irq_mask = ~((u32)IFI_CANFD_INTERRUPT_SET_IRQ);
 	u32 isr;
 
 	isr = readl(priv->base + IFI_CANFD_INTERRUPT);

[PATCH 4.9 44/67] can: ifi: Check core revision upon probe

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Vasut <marex@denx.de>

commit 591d65d5b15496af8d05e252bc1da611c66c0b79 upstream.

Older versions of the core are not compatible with the driver due
to various intrusive fixes of the core. Read out the VER register,
check the core revision bitfield and verify if the core in use is
new enough (rev 2.1 or newer) to work correctly with this driver.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Markus Marb <markus@marb.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/ifi_canfd/ifi_canfd.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/drivers/net/can/ifi_canfd/ifi_canfd.c
+++ b/drivers/net/can/ifi_canfd/ifi_canfd.c
@@ -144,6 +144,8 @@
 #define IFI_CANFD_SYSCLOCK			0x50
 
 #define IFI_CANFD_VER				0x54
+#define IFI_CANFD_VER_REV_MASK			0xff
+#define IFI_CANFD_VER_REV_MIN_SUPPORTED		0x15
 
 #define IFI_CANFD_IP_ID				0x58
 #define IFI_CANFD_IP_ID_VALUE			0xD073CAFD
@@ -943,7 +945,7 @@ static int ifi_canfd_plat_probe(struct p
 	struct resource *res;
 	void __iomem *addr;
 	int irq, ret;
-	u32 id;
+	u32 id, rev;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	addr = devm_ioremap_resource(dev, res);
@@ -957,6 +959,13 @@ static int ifi_canfd_plat_probe(struct p
 		return -EINVAL;
 	}
 
+	rev = readl(addr + IFI_CANFD_VER) & IFI_CANFD_VER_REV_MASK;
+	if (rev < IFI_CANFD_VER_REV_MIN_SUPPORTED) {
+		dev_err(dev, "This block is too old (rev %i), minimum supported is rev %i\n",
+			rev, IFI_CANFD_VER_REV_MIN_SUPPORTED);
+		return -EINVAL;
+	}
+
 	ndev = alloc_candev(sizeof(*priv), 1);
 	if (!ndev)
 		return -ENOMEM;

[PATCH 4.9 45/67] can: cc770: Fix stalls on rt-linux, remove redundant IRQ ack

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andri Yngvason <andri.yngvason@marel.com>

commit f4353daf4905c0099fd25fa742e2ffd4a4bab26a upstream.

This has been reported to cause stalls on rt-linux.

Suggested-by: Richard Weinberger <richard@nod.at>
Tested-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Andri Yngvason <andri.yngvason@marel.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/cc770/cc770.c |   15 ---------------
 1 file changed, 15 deletions(-)

--- a/drivers/net/can/cc770/cc770.c
+++ b/drivers/net/can/cc770/cc770.c
@@ -447,15 +447,6 @@ static netdev_tx_t cc770_start_xmit(stru
 
 	stats->tx_bytes += dlc;
 
-
-	/*
-	 * HM: We had some cases of repeated IRQs so make sure the
-	 * INT is acknowledged I know it's already further up, but
-	 * doing again fixed the issue
-	 */
-	cc770_write_reg(priv, msgobj[mo].ctrl0,
-			MSGVAL_UNC | TXIE_UNC | RXIE_UNC | INTPND_RES);
-
 	return NETDEV_TX_OK;
 }
 
@@ -684,12 +675,6 @@ static void cc770_tx_interrupt(struct ne
 	/* Nothing more to send, switch off interrupts */
 	cc770_write_reg(priv, msgobj[mo].ctrl0,
 			MSGVAL_RES | TXIE_RES | RXIE_RES | INTPND_RES);
-	/*
-	 * We had some cases of repeated IRQ so make sure the
-	 * INT is acknowledged
-	 */
-	cc770_write_reg(priv, msgobj[mo].ctrl0,
-			MSGVAL_UNC | TXIE_UNC | RXIE_UNC | INTPND_RES);
 
 	stats->tx_packets++;
 	can_get_echo_skb(dev, 0);

[PATCH 4.9 46/67] can: cc770: Fix queue stall & dropped RTR reply

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andri Yngvason <andri.yngvason@marel.com>

commit 746201235b3f876792099079f4c6fea941d76183 upstream.

While waiting for the TX object to send an RTR, an external message with a
matching id can overwrite the TX data. In this case we must call the rx
routine and then try transmitting the message that was overwritten again.

The queue was being stalled because the RX event did not generate an
interrupt to wake up the queue again and the TX event did not happen
because the TXRQST flag is reset by the chip when new data is received.

According to the CC770 datasheet the id of a message object should not be
changed while the MSGVAL bit is set. This has been fixed by resetting the
MSGVAL bit before modifying the object in the transmit function and setting
it after. It is not enough to set & reset CPUUPD.

It is important to keep the MSGVAL bit reset while the message object is
being modified. Otherwise, during RTR transmission, a frame with matching
id could trigger an rx-interrupt, which would cause a race condition
between the interrupt routine and the transmit function.

Signed-off-by: Andri Yngvason <andri.yngvason@marel.com>
Tested-by: Richard Weinberger <richard@nod.at>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/cc770/cc770.c |   94 +++++++++++++++++++++++++++++-------------
 drivers/net/can/cc770/cc770.h |    2 
 2 files changed, 68 insertions(+), 28 deletions(-)

--- a/drivers/net/can/cc770/cc770.c
+++ b/drivers/net/can/cc770/cc770.c
@@ -390,37 +390,23 @@ static int cc770_get_berr_counter(const
 	return 0;
 }
 
-static netdev_tx_t cc770_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static void cc770_tx(struct net_device *dev, int mo)
 {
 	struct cc770_priv *priv = netdev_priv(dev);
-	struct net_device_stats *stats = &dev->stats;
-	struct can_frame *cf = (struct can_frame *)skb->data;
-	unsigned int mo = obj2msgobj(CC770_OBJ_TX);
+	struct can_frame *cf = (struct can_frame *)priv->tx_skb->data;
 	u8 dlc, rtr;
 	u32 id;
 	int i;
 
-	if (can_dropped_invalid_skb(dev, skb))
-		return NETDEV_TX_OK;
-
-	if ((cc770_read_reg(priv,
-			    msgobj[mo].ctrl1) & TXRQST_UNC) == TXRQST_SET) {
-		netdev_err(dev, "TX register is still occupied!\n");
-		return NETDEV_TX_BUSY;
-	}
-
-	netif_stop_queue(dev);
-
 	dlc = cf->can_dlc;
 	id = cf->can_id;
-	if (cf->can_id & CAN_RTR_FLAG)
-		rtr = 0;
-	else
-		rtr = MSGCFG_DIR;
+	rtr = cf->can_id & CAN_RTR_FLAG ? 0 : MSGCFG_DIR;
+
+	cc770_write_reg(priv, msgobj[mo].ctrl0,
+			MSGVAL_RES | TXIE_RES | RXIE_RES | INTPND_RES);
 	cc770_write_reg(priv, msgobj[mo].ctrl1,
 			RMTPND_RES | TXRQST_RES | CPUUPD_SET | NEWDAT_RES);
-	cc770_write_reg(priv, msgobj[mo].ctrl0,
-			MSGVAL_SET | TXIE_SET | RXIE_RES | INTPND_RES);
+
 	if (id & CAN_EFF_FLAG) {
 		id &= CAN_EFF_MASK;
 		cc770_write_reg(priv, msgobj[mo].config,
@@ -439,13 +425,30 @@ static netdev_tx_t cc770_start_xmit(stru
 	for (i = 0; i < dlc; i++)
 		cc770_write_reg(priv, msgobj[mo].data[i], cf->data[i]);
 
-	/* Store echo skb before starting the transfer */
-	can_put_echo_skb(skb, dev, 0);
-
 	cc770_write_reg(priv, msgobj[mo].ctrl1,
-			RMTPND_RES | TXRQST_SET | CPUUPD_RES | NEWDAT_UNC);
+			RMTPND_UNC | TXRQST_SET | CPUUPD_RES | NEWDAT_UNC);
+	cc770_write_reg(priv, msgobj[mo].ctrl0,
+			MSGVAL_SET | TXIE_SET | RXIE_SET | INTPND_UNC);
+}
+
+static netdev_tx_t cc770_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct cc770_priv *priv = netdev_priv(dev);
+	unsigned int mo = obj2msgobj(CC770_OBJ_TX);
+
+	if (can_dropped_invalid_skb(dev, skb))
+		return NETDEV_TX_OK;
+
+	netif_stop_queue(dev);
+
+	if ((cc770_read_reg(priv,
+			    msgobj[mo].ctrl1) & TXRQST_UNC) == TXRQST_SET) {
+		netdev_err(dev, "TX register is still occupied!\n");
+		return NETDEV_TX_BUSY;
+	}
 
-	stats->tx_bytes += dlc;
+	priv->tx_skb = skb;
+	cc770_tx(dev, mo);
 
 	return NETDEV_TX_OK;
 }
@@ -671,13 +674,47 @@ static void cc770_tx_interrupt(struct ne
 	struct cc770_priv *priv = netdev_priv(dev);
 	struct net_device_stats *stats = &dev->stats;
 	unsigned int mo = obj2msgobj(o);
+	struct can_frame *cf;
+	u8 ctrl1;
+
+	ctrl1 = cc770_read_reg(priv, msgobj[mo].ctrl1);
 
-	/* Nothing more to send, switch off interrupts */
 	cc770_write_reg(priv, msgobj[mo].ctrl0,
 			MSGVAL_RES | TXIE_RES | RXIE_RES | INTPND_RES);
+	cc770_write_reg(priv, msgobj[mo].ctrl1,
+			RMTPND_RES | TXRQST_RES | MSGLST_RES | NEWDAT_RES);
 
-	stats->tx_packets++;
+	if (unlikely(!priv->tx_skb)) {
+		netdev_err(dev, "missing tx skb in tx interrupt\n");
+		return;
+	}
+
+	if (unlikely(ctrl1 & MSGLST_SET)) {
+		stats->rx_over_errors++;
+		stats->rx_errors++;
+	}
+
+	/* When the CC770 is sending an RTR message and it receives a regular
+	 * message that matches the id of the RTR message, it will overwrite the
+	 * outgoing message in the TX register. When this happens we must
+	 * process the received message and try to transmit the outgoing skb
+	 * again.
+	 */
+	if (unlikely(ctrl1 & NEWDAT_SET)) {
+		cc770_rx(dev, mo, ctrl1);
+		cc770_tx(dev, mo);
+		return;
+	}
+
+	can_put_echo_skb(priv->tx_skb, dev, 0);
 	can_get_echo_skb(dev, 0);
+
+	cf = (struct can_frame *)priv->tx_skb->data;
+	stats->tx_bytes += cf->can_dlc;
+	stats->tx_packets++;
+
+	priv->tx_skb = NULL;
+
 	netif_wake_queue(dev);
 }
 
@@ -789,6 +826,7 @@ struct net_device *alloc_cc770dev(int si
 	priv->can.do_set_bittiming = cc770_set_bittiming;
 	priv->can.do_set_mode = cc770_set_mode;
 	priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES;
+	priv->tx_skb = NULL;
 
 	memcpy(priv->obj_flags, cc770_obj_flags, sizeof(cc770_obj_flags));
 
--- a/drivers/net/can/cc770/cc770.h
+++ b/drivers/net/can/cc770/cc770.h
@@ -193,6 +193,8 @@ struct cc770_priv {
 	u8 cpu_interface;	/* CPU interface register */
 	u8 clkout;		/* Clock out register */
 	u8 bus_config;		/* Bus conffiguration register */
+
+	struct sk_buff *tx_skb;
 };
 
 struct net_device *alloc_cc770dev(int sizeof_priv);

[PATCH 4.9 47/67] can: cc770: Fix use after free in cc770_tx_interrupt()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andri Yngvason <andri.yngvason@marel.com>

commit 9ffd7503944ec7c0ef41c3245d1306c221aef2be upstream.

This fixes use after free introduced by the last cc770 patch.

Signed-off-by: Andri Yngvason <andri.yngvason@marel.com>
Fixes: 746201235b3f ("can: cc770: Fix queue stall & dropped RTR reply")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/cc770/cc770.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/net/can/cc770/cc770.c
+++ b/drivers/net/can/cc770/cc770.c
@@ -706,13 +706,12 @@ static void cc770_tx_interrupt(struct ne
 		return;
 	}
 
-	can_put_echo_skb(priv->tx_skb, dev, 0);
-	can_get_echo_skb(dev, 0);
-
 	cf = (struct can_frame *)priv->tx_skb->data;
 	stats->tx_bytes += cf->can_dlc;
 	stats->tx_packets++;
 
+	can_put_echo_skb(priv->tx_skb, dev, 0);
+	can_get_echo_skb(dev, 0);
 	priv->tx_skb = NULL;
 
 	netif_wake_queue(dev);

[PATCH 4.9 48/67] tty: vt: fix up tabstops properly

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Torvalds <torvalds@linux-foundation.org>

commit f1869a890cdedb92a3fab969db5d0fd982850273 upstream.

Tabs on a console with long lines do not wrap properly, so correctly
account for the line length when computing the tab placement location.

Reported-by: James Holderness <j4_james@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/vt/vt.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1727,7 +1727,7 @@ static void reset_terminal(struct vc_dat
 	default_attr(vc);
 	update_attr(vc);
 
-	vc->vc_tab_stop[0]	= 0x01010100;
+	vc->vc_tab_stop[0]	=
 	vc->vc_tab_stop[1]	=
 	vc->vc_tab_stop[2]	=
 	vc->vc_tab_stop[3]	=
@@ -1771,7 +1771,7 @@ static void do_con_trol(struct tty_struc
 		vc->vc_pos -= (vc->vc_x << 1);
 		while (vc->vc_x < vc->vc_cols - 1) {
 			vc->vc_x++;
-			if (vc->vc_tab_stop[vc->vc_x >> 5] & (1 << (vc->vc_x & 31)))
+			if (vc->vc_tab_stop[7 & (vc->vc_x >> 5)] & (1 << (vc->vc_x & 31)))
 				break;
 		}
 		vc->vc_pos += (vc->vc_x << 1);
@@ -1831,7 +1831,7 @@ static void do_con_trol(struct tty_struc
 			lf(vc);
 			return;
 		case 'H':
-			vc->vc_tab_stop[vc->vc_x >> 5] |= (1 << (vc->vc_x & 31));
+			vc->vc_tab_stop[7 & (vc->vc_x >> 5)] |= (1 << (vc->vc_x & 31));
 			return;
 		case 'Z':
 			respond_ID(tty);
@@ -2024,7 +2024,7 @@ static void do_con_trol(struct tty_struc
 			return;
 		case 'g':
 			if (!vc->vc_par[0])
-				vc->vc_tab_stop[vc->vc_x >> 5] &= ~(1 << (vc->vc_x & 31));
+				vc->vc_tab_stop[7 & (vc->vc_x >> 5)] &= ~(1 << (vc->vc_x & 31));
 			else if (vc->vc_par[0] == 3) {
 				vc->vc_tab_stop[0] =
 					vc->vc_tab_stop[1] =

[PATCH 4.9 49/67] selftests/x86/ptrace_syscall: Fix for yet more glibc interference

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@kernel.org>

commit 4b0b37d4cc54b21a6ecad7271cbc850555869c62 upstream.

glibc keeps getting cleverer, and my version now turns raise() into
more than one syscall.  Since the test relies on ptrace seeing an
exact set of syscalls, this breaks the test.  Replace raise(SIGSTOP)
with syscall(SYS_tgkill, ...) to force glibc to get out of our way.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/bc80338b453afa187bc5f895bd8e2c8d6e264da2.1521300271.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/testing/selftests/x86/ptrace_syscall.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/tools/testing/selftests/x86/ptrace_syscall.c
+++ b/tools/testing/selftests/x86/ptrace_syscall.c
@@ -182,8 +182,10 @@ static void test_ptrace_syscall_restart(
 		if (ptrace(PTRACE_TRACEME, 0, 0, 0) != 0)
 			err(1, "PTRACE_TRACEME");
 
+		pid_t pid = getpid(), tid = syscall(SYS_gettid);
+
 		printf("\tChild will make one syscall\n");
-		raise(SIGSTOP);
+		syscall(SYS_tgkill, pid, tid, SIGSTOP);
 
 		syscall(SYS_gettid, 10, 11, 12, 13, 14, 15);
 		_exit(0);
@@ -300,9 +302,11 @@ static void test_restart_under_ptrace(vo
 		if (ptrace(PTRACE_TRACEME, 0, 0, 0) != 0)
 			err(1, "PTRACE_TRACEME");
 
+		pid_t pid = getpid(), tid = syscall(SYS_gettid);
+
 		printf("\tChild will take a nap until signaled\n");
 		setsigign(SIGUSR1, SA_RESTART);
-		raise(SIGSTOP);
+		syscall(SYS_tgkill, pid, tid, SIGSTOP);
 
 		syscall(SYS_pause, 0, 0, 0, 0, 0, 0);
 		_exit(0);

[PATCH 4.9 50/67] kvm/x86: fix icebp instruction handling

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 32d43cd391bacb5f0814c2624399a5dad3501d09 upstream.

The undocumented 'icebp' instruction (aka 'int1') works pretty much like
'int3' in the absense of in-circuit probing equipment (except,
obviously, that it raises #DB instead of raising #BP), and is used by
some validation test-suites as such.

But Andy Lutomirski noticed that his test suite acted differently in kvm
than on bare hardware.

The reason is that kvm used an inexact test for the icebp instruction:
it just assumed that an all-zero VM exit qualification value meant that
the VM exit was due to icebp.

That is not unlike the guess that do_debug() does for the actual
exception handling case, but it's purely a heuristic, not an absolute
rule.  do_debug() does it because it wants to ascribe _some_ reasons to
the #DB that happened, and an empty %dr6 value means that 'icebp' is the
most likely casue and we have no better information.

But kvm can just do it right, because unlike the do_debug() case, kvm
actually sees the real reason for the #DB in the VM-exit interruption
information field.

So instead of relying on an inexact heuristic, just use the actual VM
exit information that says "it was 'icebp'".

Right now the 'icebp' instruction isn't technically documented by Intel,
but that will hopefully change.  The special "privileged software
exception" information _is_ actually mentioned in the Intel SDM, even
though the cause of it isn't enumerated.

Reported-by: Andy Lutomirski <luto@kernel.org>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/vmx.h |    1 +
 arch/x86/kvm/vmx.c         |    9 ++++++++-
 2 files changed, 9 insertions(+), 1 deletion(-)

--- a/arch/x86/include/asm/vmx.h
+++ b/arch/x86/include/asm/vmx.h
@@ -309,6 +309,7 @@ enum vmcs_field {
 #define INTR_TYPE_NMI_INTR		(2 << 8) /* NMI */
 #define INTR_TYPE_HARD_EXCEPTION	(3 << 8) /* processor exception */
 #define INTR_TYPE_SOFT_INTR             (4 << 8) /* software interrupt */
+#define INTR_TYPE_PRIV_SW_EXCEPTION	(5 << 8) /* ICE breakpoint - undocumented */
 #define INTR_TYPE_SOFT_EXCEPTION	(6 << 8) /* software exception */
 
 /* GUEST_INTERRUPTIBILITY_INFO flags. */
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1053,6 +1053,13 @@ static inline bool is_machine_check(u32
 		(INTR_TYPE_HARD_EXCEPTION | MC_VECTOR | INTR_INFO_VALID_MASK);
 }
 
+/* Undocumented: icebp/int1 */
+static inline bool is_icebp(u32 intr_info)
+{
+	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VALID_MASK))
+		== (INTR_TYPE_PRIV_SW_EXCEPTION | INTR_INFO_VALID_MASK);
+}
+
 static inline bool cpu_has_vmx_msr_bitmap(void)
 {
 	return vmcs_config.cpu_based_exec_ctrl & CPU_BASED_USE_MSR_BITMAPS;
@@ -5733,7 +5740,7 @@ static int handle_exception(struct kvm_v
 		      (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))) {
 			vcpu->arch.dr6 &= ~15;
 			vcpu->arch.dr6 |= dr6 | DR6_RTM;
-			if (!(dr6 & ~DR6_RESERVED)) /* icebp */
+			if (is_icebp(intr_info))
 				skip_emulated_instruction(vcpu);
 
 			kvm_queue_exception(vcpu, DB_VECTOR);

[PATCH 4.9 51/67] x86/build/64: Force the linker to use 2MB page size

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: H.J. Lu <hjl.tools@gmail.com>

commit e3d03598e8ae7d195af5d3d049596dec336f569f upstream.

Binutils 2.31 will enable -z separate-code by default for x86 to avoid
mixing code pages with data to improve cache performance as well as
security.  To reduce x86-64 executable and shared object sizes, the
maximum page size is reduced from 2MB to 4KB.  But x86-64 kernel must
be aligned to 2MB.  Pass -z max-page-size=0x200000 to linker to force
2MB page size regardless of the default page size used by linker.

Tested with Linux kernel 4.15.6 on x86-64.

Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/CAMe9rOp4_%3D_8twdpTyAP2DhONOCeaTOsniJLoppzhoNptL8xzA@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/Makefile |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -172,6 +172,15 @@ KBUILD_CFLAGS += $(cfi) $(cfi-sigframe)
 
 LDFLAGS := -m elf_$(UTS_MACHINE)
 
+#
+# The 64-bit kernel must be aligned to 2MB.  Pass -z max-page-size=0x200000 to
+# the linker to force 2MB page size regardless of the default page size used
+# by the linker.
+#
+ifdef CONFIG_X86_64
+LDFLAGS += $(call ld-option, -z max-page-size=0x200000)
+endif
+
 # Speed up the build
 KBUILD_CFLAGS += -pipe
 # Workaround for a gcc prelease that unfortunately was shipped in a suse release

[PATCH 4.9 52/67] x86/boot/64: Verify alignment of the LOAD segment

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: H.J. Lu <hjl.tools@gmail.com>

commit c55b8550fa57ba4f5e507be406ff9fc2845713e8 upstream.

Since the x86-64 kernel must be aligned to 2MB, refuse to boot the
kernel if the alignment of the LOAD segment isn't a multiple of 2MB.

Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/CAMe9rOrR7xSJgUfiCoZLuqWUwymRxXPoGBW38%2BpN%3D9g%2ByKNhZw@mail.gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/boot/compressed/misc.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -299,6 +299,10 @@ static void parse_elf(void *output)
 
 		switch (phdr->p_type) {
 		case PT_LOAD:
+#ifdef CONFIG_X86_64
+			if ((phdr->p_align % 0x200000) != 0)
+				error("Alignment of LOAD segment isn't multiple of 2MB");
+#endif
 #ifdef CONFIG_RELOCATABLE
 			dest = output;
 			dest += (phdr->p_paddr - LOAD_PHYSICAL_ADDR);

[PATCH 4.9 53/67] x86/entry/64: Dont use IST entry for #BP stack

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@kernel.org>

commit d8ba61ba58c88d5207c1ba2f7d9a2280e7d03be9 upstream.

There's nothing IST-worthy about #BP/int3.  We don't allow kprobes
in the small handful of places in the kernel that run at CPL0 with
an invalid stack, and 32-bit kernels have used normal interrupt
gates for #BP forever.

Furthermore, we don't allow kprobes in places that have usergs while
in kernel mode, so "paranoid" is also unnecessary.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/entry/entry_64.S |    2 +-
 arch/x86/kernel/traps.c   |   24 +++++++++++-------------
 2 files changed, 12 insertions(+), 14 deletions(-)

--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -943,7 +943,7 @@ apicinterrupt3 HYPERVISOR_CALLBACK_VECTO
 #endif /* CONFIG_HYPERV */
 
 idtentry debug			do_debug		has_error_code=0	paranoid=1 shift_ist=DEBUG_STACK
-idtentry int3			do_int3			has_error_code=0	paranoid=1 shift_ist=DEBUG_STACK
+idtentry int3			do_int3			has_error_code=0
 idtentry stack_segment		do_stack_segment	has_error_code=1
 
 #ifdef CONFIG_XEN
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -526,7 +526,6 @@ do_general_protection(struct pt_regs *re
 }
 NOKPROBE_SYMBOL(do_general_protection);
 
-/* May run on IST stack. */
 dotraplinkage void notrace do_int3(struct pt_regs *regs, long error_code)
 {
 #ifdef CONFIG_DYNAMIC_FTRACE
@@ -541,7 +540,15 @@ dotraplinkage void notrace do_int3(struc
 	if (poke_int3_handler(regs))
 		return;
 
+	/*
+	 * Use ist_enter despite the fact that we don't use an IST stack.
+	 * We can be called from a kprobe in non-CONTEXT_KERNEL kernel
+	 * mode or even during context tracking state changes.
+	 *
+	 * This means that we can't schedule.  That's okay.
+	 */
 	ist_enter(regs);
+
 	RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU");
 #ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
 	if (kgdb_ll_trap(DIE_INT3, "int3", regs, error_code, X86_TRAP_BP,
@@ -558,17 +565,11 @@ dotraplinkage void notrace do_int3(struc
 			SIGTRAP) == NOTIFY_STOP)
 		goto exit;
 
-	/*
-	 * Let others (NMI) know that the debug stack is in use
-	 * as we may switch to the interrupt stack.
-	 */
-	debug_stack_usage_inc();
 	preempt_disable();
 	cond_local_irq_enable(regs);
 	do_trap(X86_TRAP_BP, SIGTRAP, "int3", regs, error_code, NULL);
 	cond_local_irq_disable(regs);
 	preempt_enable_no_resched();
-	debug_stack_usage_dec();
 exit:
 	ist_exit(regs);
 }
@@ -989,19 +990,16 @@ void __init trap_init(void)
 	cpu_init();
 
 	/*
-	 * X86_TRAP_DB and X86_TRAP_BP have been set
-	 * in early_trap_init(). However, ITS works only after
-	 * cpu_init() loads TSS. See comments in early_trap_init().
+	 * X86_TRAP_DB was installed in early_trap_init(). However,
+	 * IST works only after cpu_init() loads TSS. See comments
+	 * in early_trap_init().
 	 */
 	set_intr_gate_ist(X86_TRAP_DB, &debug, DEBUG_STACK);
-	/* int3 can be called from all */
-	set_system_intr_gate_ist(X86_TRAP_BP, &int3, DEBUG_STACK);
 
 	x86_init.irqs.trap_init();
 
 #ifdef CONFIG_X86_64
 	memcpy(&debug_idt_table, &idt_table, IDT_ENTRIES * 16);
 	set_nmi_gate(X86_TRAP_DB, &debug);
-	set_nmi_gate(X86_TRAP_BP, &int3);
 #endif
 }

[PATCH 4.9 54/67] perf/x86/intel/uncore: Fix Skylake UPI event format

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kan Liang <kan.liang@linux.intel.com>

commit 317660940fd9dddd3201c2f92e25c27902c753fa upstream.

There is no event extension (bit 21) for SKX UPI, so
use 'event' instead of 'event_ext'.

Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: cd34cd97b7b4 ("perf/x86/intel/uncore: Add Skylake server uncore support")
Link: http://lkml.kernel.org/r/1520004150-4855-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/events/intel/uncore_snbep.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -3566,7 +3566,7 @@ static struct intel_uncore_type skx_unco
 };
 
 static struct attribute *skx_upi_uncore_formats_attr[] = {
-	&format_attr_event_ext.attr,
+	&format_attr_event.attr,
 	&format_attr_umask_ext.attr,
 	&format_attr_edge.attr,
 	&format_attr_inv.attr,

[PATCH 4.9 55/67] perf stat: Fix CVS output format for non-supported counters

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ilya Pronin <ipronin@twitter.com>

commit 40c21898ba5372c14ef71717040529794a91ccc2 upstream.

When printing stats in CSV mode, 'perf stat' appends extra separators
when a counter is not supported:

<not supported>,,L1-dcache-store-misses,mesos/bd442f34-2b4a-47df-b966-9b281f9f56fc,0,100.00,,,,

Which causes a failure when parsing fields. The numbers of separators
should be the same for each line, no matter if the counter is or not
supported.

Signed-off-by: Ilya Pronin <ipronin@twitter.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20180306064353.31930-1-xiyou.wangcong@gmail.com
Fixes: 92a61f6412d3 ("perf stat: Implement CSV metrics output")
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/perf/builtin-stat.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -876,7 +876,7 @@ static void print_metric_csv(void *ctx,
 	char buf[64], *vals, *ends;
 
 	if (unit == NULL || fmt == NULL) {
-		fprintf(out, "%s%s%s%s", csv_sep, csv_sep, csv_sep, csv_sep);
+		fprintf(out, "%s%s", csv_sep, csv_sep);
 		return;
 	}
 	snprintf(buf, sizeof(buf), fmt, val);

[PATCH 4.9 56/67] perf/x86/intel: Dont accidentally clear high bits in bdw_limit_period()

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit e5ea9b54a055619160bbfe527ebb7d7191823d66 upstream.

We intended to clear the lowest 6 bits but because of a type bug we
clear the high 32 bits as well.  Andi says that periods are rarely more
than U32_MAX so this bug probably doesn't have a huge runtime impact.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 294fe0f52a44 ("perf/x86/intel: Add INST_RETIRED.ALL workarounds")
Link: http://lkml.kernel.org/r/20180317115216.GB4035@mwanda
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/events/intel/core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -3025,7 +3025,7 @@ static unsigned bdw_limit_period(struct
 			X86_CONFIG(.event=0xc0, .umask=0x01)) {
 		if (left < 128)
 			left = 128;
-		left &= ~0x3fu;
+		left &= ~0x3fULL;
 	}
 	return left;
 }

[PATCH 4.9 57/67] perf/x86/intel/uncore: Fix multi-domain PCI CHA enumeration bug on Skylake servers

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kan Liang <kan.liang@linux.intel.com>

commit 320b0651f32b830add6497fcdcfdcb6ae8c7b8a0 upstream.

The number of CHAs is miscalculated on multi-domain PCI Skylake server systems,
resulting in an uncore driver initialization error.

Gary Kroening explains:

 "For systems with a single PCI segment, it is sufficient to look for the
  bus number to change in order to determine that all of the CHa's have
  been counted for a single socket.

  However, for multi PCI segment systems, each socket is given a new
  segment and the bus number does NOT change.  So looking only for the
  bus number to change ends up counting all of the CHa's on all sockets
  in the system.  This leads to writing CPU MSRs beyond a valid range and
  causes an error in ivbep_uncore_msr_init_box()."

To fix this bug, query the number of CHAs from the CAPID6 register:
it should read bits 27:0 in the CAPID6 register located at
Device 30, Function 3, Offset 0x9C. These 28 bits form a bit vector
of available LLC slices and the CHAs that manage those slices.

Reported-by: Kroening, Gary <gary.kroening@hpe.com>
Tested-by: Kroening, Gary <gary.kroening@hpe.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: abanman@hpe.com
Cc: dimitri.sivanich@hpe.com
Cc: hpa@zytor.com
Cc: mike.travis@hpe.com
Cc: russ.anderson@hpe.com
Fixes: cd34cd97b7b4 ("perf/x86/intel/uncore: Add Skylake server uncore support")
Link: http://lkml.kernel.org/r/1520967094-13219-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/events/intel/uncore_snbep.c |   31 +++++++++++++++++--------------
 1 file changed, 17 insertions(+), 14 deletions(-)

--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -3522,24 +3522,27 @@ static struct intel_uncore_type *skx_msr
 	NULL,
 };
 
+/*
+ * To determine the number of CHAs, it should read bits 27:0 in the CAPID6
+ * register which located at Device 30, Function 3, Offset 0x9C. PCI ID 0x2083.
+ */
+#define SKX_CAPID6		0x9c
+#define SKX_CHA_BIT_MASK	GENMASK(27, 0)
+
 static int skx_count_chabox(void)
 {
-	struct pci_dev *chabox_dev = NULL;
-	int bus, count = 0;
+	struct pci_dev *dev = NULL;
+	u32 val = 0;
 
-	while (1) {
-		chabox_dev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x208d, chabox_dev);
-		if (!chabox_dev)
-			break;
-		if (count == 0)
-			bus = chabox_dev->bus->number;
-		if (bus != chabox_dev->bus->number)
-			break;
-		count++;
-	}
+	dev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x2083, dev);
+	if (!dev)
+		goto out;
 
-	pci_dev_put(chabox_dev);
-	return count;
+	pci_read_config_dword(dev, SKX_CAPID6, &val);
+	val &= SKX_CHA_BIT_MASK;
+out:
+	pci_dev_put(dev);
+	return hweight32(val);
 }
 
 void skx_uncore_cpu_init(void)

[PATCH 4.9 58/67] iio: ABI: Fix name of timestamp sysfs file

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Walleij <linus.walleij@linaro.org>

commit b9a3589332c2a25fb7edad25a26fcaada3209126 upstream.

The name of the file is "current_timetamp_clock" not
"timestamp_clock".

Fixes: bc2b7dab629a ("iio:core: timestamping clock selection support")
Cc: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/ABI/testing/sysfs-bus-iio |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -32,7 +32,7 @@ Description:
 		Description of the physical chip / device for device X.
 		Typically a part number.
 
-What:		/sys/bus/iio/devices/iio:deviceX/timestamp_clock
+What:		/sys/bus/iio/devices/iio:deviceX/current_timestamp_clock
 KernelVersion:	4.5
 Contact:	linux-iio@vger.kernel.org
 Description:

[PATCH 4.9 59/67] staging: lustre: ptlrpc: kfree used instead of kvfree

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nadav Amit <namit@vmware.com>

commit c3eec59659cf25916647d2178c541302bb4822ad upstream.

rq_reqbuf is allocated using kvmalloc() but released in one occasion
using kfree() instead of kvfree().

The issue was found using grep based on a similar bug.

Fixes: d7e09d0397e8 ("add Lustre file system client support")
Fixes: ee0ec1946ec2 ("lustre: ptlrpc: Replace uses of OBD_{ALLOC,FREE}_LARGE")

Cc: Peng Tao <bergwolf@gmail.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: James Simmons <jsimmons@infradead.org>

Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/lustre/lustre/ptlrpc/sec.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/lustre/lustre/ptlrpc/sec.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/sec.c
@@ -838,7 +838,7 @@ void sptlrpc_request_out_callback(struct
 	if (req->rq_pool || !req->rq_reqbuf)
 		return;
 
-	kfree(req->rq_reqbuf);
+	kvfree(req->rq_reqbuf);
 	req->rq_reqbuf = NULL;
 	req->rq_reqbuf_len = 0;
 }

[PATCH 4.9 60/67] selftests, x86, protection_keys: fix wrong offset in siginfo

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Hansen <dave.hansen@linux.intel.com>

commit 2195bff041486eb7fcceaf058acaedcd057efbdc upstream.

The siginfo contains a bunch of information about the fault.
For protection keys, it tells us which protection key's
permissions were violated.

The wrong offset in here leads to reading garbage and thus
failures in the tests.

We should probably eventually move this over to using the
kernel's headers defining the siginfo instead of a hard-coded
offset.  But, for now, just do the simplest fix.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/testing/selftests/x86/protection_keys.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/testing/selftests/x86/protection_keys.c
+++ b/tools/testing/selftests/x86/protection_keys.c
@@ -192,7 +192,7 @@ void lots_o_noops_around_write(int *writ
 #define SYS_pkey_alloc	 381
 #define SYS_pkey_free	 382
 #define REG_IP_IDX REG_EIP
-#define si_pkey_offset 0x18
+#define si_pkey_offset 0x14
 #else
 #define SYS_mprotect_key 329
 #define SYS_pkey_alloc	 330

[PATCH 4.9 61/67] selftests/x86/protection_keys: Fix syscall NR redefinition warnings

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@kernel.org>

commit 693cb5580fdb026922363aa103add64b3ecd572e upstream.

On new enough glibc, the pkey syscalls numbers are available.  Check
first before defining them to avoid warnings like:

protection_keys.c:198:0: warning: "SYS_pkey_alloc" redefined

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bpetkov@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1fbef53a9e6befb7165ff855fc1a7d4788a191d6.1509794321.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/testing/selftests/x86/protection_keys.c |   24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

--- a/tools/testing/selftests/x86/protection_keys.c
+++ b/tools/testing/selftests/x86/protection_keys.c
@@ -188,17 +188,29 @@ void lots_o_noops_around_write(int *writ
 #define u64 uint64_t
 
 #ifdef __i386__
-#define SYS_mprotect_key 380
-#define SYS_pkey_alloc	 381
-#define SYS_pkey_free	 382
+
+#ifndef SYS_mprotect_key
+# define SYS_mprotect_key 380
+#endif
+#ifndef SYS_pkey_alloc
+# define SYS_pkey_alloc	 381
+# define SYS_pkey_free	 382
+#endif
 #define REG_IP_IDX REG_EIP
 #define si_pkey_offset 0x14
+
 #else
-#define SYS_mprotect_key 329
-#define SYS_pkey_alloc	 330
-#define SYS_pkey_free	 331
+
+#ifndef SYS_mprotect_key
+# define SYS_mprotect_key 329
+#endif
+#ifndef SYS_pkey_alloc
+# define SYS_pkey_alloc	 330
+# define SYS_pkey_free	 331
+#endif
 #define REG_IP_IDX REG_RIP
 #define si_pkey_offset 0x20
+
 #endif
 
 void dump_mem(void *dumpme, int len_bytes)

[PATCH 4.9 62/67] signal/testing: Dont look for __SI_FAULT in userspace

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric W. Biederman <ebiederm@xmission.com>

commit d12fe87e62d773e81e0cb3a123c5a480a10d7d91 upstream.

Fix the debug print statements in these tests where they reference
si_codes and in particular __SI_FAULT.  __SI_FAULT is a kernel
internal value and should never be seen by userspace.

While I am in there also fix si_code_str.  si_codes are an enumeration
there are not a bitmap so == and not & is the apropriate operation to
test for an si_code.

Cc: Dave Hansen <dave.hansen@linux.intel.com>
Fixes: 5f23f6d082a9 ("x86/pkeys: Add self-tests")
Fixes: e754aedc26ef ("x86/mpx, selftests: Add MPX self test")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/testing/selftests/x86/mpx-mini-test.c   |    3 +--
 tools/testing/selftests/x86/protection_keys.c |   13 ++++++-------
 2 files changed, 7 insertions(+), 9 deletions(-)

--- a/tools/testing/selftests/x86/mpx-mini-test.c
+++ b/tools/testing/selftests/x86/mpx-mini-test.c
@@ -419,8 +419,7 @@ void handler(int signum, siginfo_t *si,
 		br_count++;
 		dprintf1("#BR 0x%jx (total seen: %d)\n", status, br_count);
 
-#define __SI_FAULT      (3 << 16)
-#define SEGV_BNDERR     (__SI_FAULT|3)  /* failed address bound checks */
+#define SEGV_BNDERR     3  /* failed address bound checks */
 
 		dprintf2("Saw a #BR! status 0x%jx at %016lx br_reason: %jx\n",
 				status, ip, br_reason);
--- a/tools/testing/selftests/x86/protection_keys.c
+++ b/tools/testing/selftests/x86/protection_keys.c
@@ -224,19 +224,18 @@ void dump_mem(void *dumpme, int len_byte
 	}
 }
 
-#define __SI_FAULT      (3 << 16)
-#define SEGV_BNDERR     (__SI_FAULT|3)  /* failed address bound checks */
-#define SEGV_PKUERR     (__SI_FAULT|4)
+#define SEGV_BNDERR     3  /* failed address bound checks */
+#define SEGV_PKUERR     4
 
 static char *si_code_str(int si_code)
 {
-	if (si_code & SEGV_MAPERR)
+	if (si_code == SEGV_MAPERR)
 		return "SEGV_MAPERR";
-	if (si_code & SEGV_ACCERR)
+	if (si_code == SEGV_ACCERR)
 		return "SEGV_ACCERR";
-	if (si_code & SEGV_BNDERR)
+	if (si_code == SEGV_BNDERR)
 		return "SEGV_BNDERR";
-	if (si_code & SEGV_PKUERR)
+	if (si_code == SEGV_PKUERR)
 		return "SEGV_PKUERR";
 	return "UNKNOWN";
 }

[PATCH 4.9 63/67] x86/pkeys/selftests: Rename si_pkey to siginfo_pkey

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Hansen <dave.hansen@linux.intel.com>

commit 91c49c2deb96ffc3c461eaae70219d89224076b7 upstream.

'si_pkey' is now #defined to be the name of the new siginfo field that
protection keys uses.  Rename it not to conflict.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171111001231.DFFC8285@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/testing/selftests/x86/protection_keys.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/tools/testing/selftests/x86/protection_keys.c
+++ b/tools/testing/selftests/x86/protection_keys.c
@@ -249,7 +249,7 @@ void signal_handler(int signum, siginfo_
 	unsigned long ip;
 	char *fpregs;
 	u32 *pkru_ptr;
-	u64 si_pkey;
+	u64 siginfo_pkey;
 	u32 *si_pkey_ptr;
 	int pkru_offset;
 	fpregset_t fpregset;
@@ -291,9 +291,9 @@ void signal_handler(int signum, siginfo_
 	si_pkey_ptr = (u32 *)(((u8 *)si) + si_pkey_offset);
 	dprintf1("si_pkey_ptr: %p\n", si_pkey_ptr);
 	dump_mem(si_pkey_ptr - 8, 24);
-	si_pkey = *si_pkey_ptr;
-	pkey_assert(si_pkey < NR_PKEYS);
-	last_si_pkey = si_pkey;
+	siginfo_pkey = *si_pkey_ptr;
+	pkey_assert(siginfo_pkey < NR_PKEYS);
+	last_si_pkey = siginfo_pkey;
 
 	if ((si->si_code == SEGV_MAPERR) ||
 	    (si->si_code == SEGV_ACCERR) ||
@@ -305,7 +305,7 @@ void signal_handler(int signum, siginfo_
 	dprintf1("signal pkru from xsave: %08x\n", *pkru_ptr);
 	/* need __rdpkru() version so we do not do shadow_pkru checking */
 	dprintf1("signal pkru from  pkru: %08x\n", __rdpkru());
-	dprintf1("si_pkey from siginfo: %jx\n", si_pkey);
+	dprintf1("pkey from siginfo: %jx\n", siginfo_pkey);
 	*(u64 *)pkru_ptr = 0x00000000;
 	dprintf1("WARNING: set PRKU=0 to allow faulting instruction to continue\n");
 	pkru_faults++;

[PATCH 4.9 64/67] selftests: x86: sysret_ss_attrs doesnt build on a PIE build

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shuah Khan <shuahkh@osg.samsung.com>

commit 3346a6a4e5ba8c040360f753b26938cec31a4bdc upstream.

sysret_ss_attrs fails to compile leading x86 test run to fail on systems
configured to build using PIE by default. Add -no-pie fix it.

Relocation might still fail if relocated above 4G. For now this change
fixes the build and runs x86 tests.

tools/testing/selftests/x86$ make
gcc -m64 -o .../tools/testing/selftests/x86/single_step_syscall_64 -O2
-g -std=gnu99 -pthread -Wall  single_step_syscall.c -lrt -ldl
gcc -m64 -o .../tools/testing/selftests/x86/sysret_ss_attrs_64 -O2 -g
-std=gnu99 -pthread -Wall  sysret_ss_attrs.c thunks.S -lrt -ldl
/usr/bin/ld: /tmp/ccS6pvIh.o: relocation R_X86_64_32S against `.text'
can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: final link failed: Nonrepresentable section on output
collect2: error: ld returned 1 exit status
Makefile:49: recipe for target
'.../tools/testing/selftests/x86/sysret_ss_attrs_64' failed
make: *** [.../tools/testing/selftests/x86/sysret_ss_attrs_64] Error 1

Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/testing/selftests/x86/Makefile |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/testing/selftests/x86/Makefile
+++ b/tools/testing/selftests/x86/Makefile
@@ -17,7 +17,7 @@ TARGETS_C_64BIT_ALL := $(TARGETS_C_BOTHB
 BINARIES_32 := $(TARGETS_C_32BIT_ALL:%=%_32)
 BINARIES_64 := $(TARGETS_C_64BIT_ALL:%=%_64)
 
-CFLAGS := -O2 -g -std=gnu99 -pthread -Wall
+CFLAGS := -O2 -g -std=gnu99 -pthread -Wall -no-pie
 
 UNAME_M := $(shell uname -m)
 CAN_BUILD_I386 := $(shell ./check_cc.sh $(CC) trivial_32bit_program.c -m32)

[PATCH 4.9 65/67] kbuild: disable clangs default use of -fmerge-all-constants

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Borkmann <daniel@iogearbox.net>

commit 87e0d4f0f37fb0c8c4aeeac46fff5e957738df79 upstream.

Prasad reported that he has seen crashes in BPF subsystem with netd
on Android with arm64 in the form of (note, the taint is unrelated):

  [ 4134.721483] Unable to handle kernel paging request at virtual address 800000001
  [ 4134.820925] Mem abort info:
  [ 4134.901283]   Exception class = DABT (current EL), IL = 32 bits
  [ 4135.016736]   SET = 0, FnV = 0
  [ 4135.119820]   EA = 0, S1PTW = 0
  [ 4135.201431] Data abort info:
  [ 4135.301388]   ISV = 0, ISS = 0x00000021
  [ 4135.359599]   CM = 0, WnR = 0
  [ 4135.470873] user pgtable: 4k pages, 39-bit VAs, pgd = ffffffe39b946000
  [ 4135.499757] [0000000800000001] *pgd=0000000000000000, *pud=0000000000000000
  [ 4135.660725] Internal error: Oops: 96000021 [#1] PREEMPT SMP
  [ 4135.674610] Modules linked in:
  [ 4135.682883] CPU: 5 PID: 1260 Comm: netd Tainted: G S      W       4.14.19+ #1
  [ 4135.716188] task: ffffffe39f4aa380 task.stack: ffffff801d4e0000
  [ 4135.731599] PC is at bpf_prog_add+0x20/0x68
  [ 4135.741746] LR is at bpf_prog_inc+0x20/0x2c
  [ 4135.751788] pc : [<ffffff94ab7ad584>] lr : [<ffffff94ab7ad638>] pstate: 60400145
  [ 4135.769062] sp : ffffff801d4e3ce0
  [...]
  [ 4136.258315] Process netd (pid: 1260, stack limit = 0xffffff801d4e0000)
  [ 4136.273746] Call trace:
  [...]
  [ 4136.442494] 3ca0: ffffff94ab7ad584 0000000060400145 ffffffe3a01bf8f8 0000000000000006
  [ 4136.460936] 3cc0: 0000008000000000 ffffff94ab844204 ffffff801d4e3cf0 ffffff94ab7ad584
  [ 4136.479241] [<ffffff94ab7ad584>] bpf_prog_add+0x20/0x68
  [ 4136.491767] [<ffffff94ab7ad638>] bpf_prog_inc+0x20/0x2c
  [ 4136.504536] [<ffffff94ab7b5d08>] bpf_obj_get_user+0x204/0x22c
  [ 4136.518746] [<ffffff94ab7ade68>] SyS_bpf+0x5a8/0x1a88

Android's netd was basically pinning the uid cookie BPF map in BPF
fs (/sys/fs/bpf/traffic_cookie_uid_map) and later on retrieving it
again resulting in above panic. Issue is that the map was wrongly
identified as a prog! Above kernel was compiled with clang 4.0,
and it turns out that clang decided to merge the bpf_prog_iops and
bpf_map_iops into a single memory location, such that the two i_ops
could then not be distinguished anymore.

Reason for this miscompilation is that clang has the more aggressive
-fmerge-all-constants enabled by default. In fact, clang source code
has a comment about it in lib/AST/ExprConstant.cpp on why it is okay
to do so:

  Pointers with different bases cannot represent the same object.
  (Note that clang defaults to -fmerge-all-constants, which can
  lead to inconsistent results for comparisons involving the address
  of a constant; this generally doesn't matter in practice.)

The issue never appeared with gcc however, since gcc does not enable
-fmerge-all-constants by default and even *explicitly* states in
it's option description that using this flag results in non-conforming
behavior, quote from man gcc:

  Languages like C or C++ require each variable, including multiple
  instances of the same variable in recursive calls, to have distinct
  locations, so using this option results in non-conforming behavior.

There are also various clang bug reports open on that matter [1],
where clang developers acknowledge the non-conforming behavior,
and refer to disabling it with -fno-merge-all-constants. But even
if this gets fixed in clang today, there are already users out there
that triggered this. Thus, fix this issue by explicitly adding
-fno-merge-all-constants to the kernel's Makefile to generically
disable this optimization, since potentially other places in the
kernel could subtly break as well.

Note, there is also a flag called -fmerge-constants (not supported
by clang), which is more conservative and only applies to strings
and it's enabled in gcc's -O/-O2/-O3/-Os optimization levels. In
gcc's code, the two flags -fmerge-{all-,}constants share the same
variable internally, so when disabling it via -fno-merge-all-constants,
then we really don't merge any const data (e.g. strings), and text
size increases with gcc (14,927,214 -> 14,942,646 for vmlinux.o).

  $ gcc -fverbose-asm -O2 foo.c -S -o foo.S
    -> foo.S lists -fmerge-constants under options enabled
  $ gcc -fverbose-asm -O2 -fno-merge-all-constants foo.c -S -o foo.S
    -> foo.S doesn't list -fmerge-constants under options enabled
  $ gcc -fverbose-asm -O2 -fno-merge-all-constants -fmerge-constants foo.c -S -o foo.S
    -> foo.S lists -fmerge-constants under options enabled

Thus, as a workaround we need to set both -fno-merge-all-constants
*and* -fmerge-constants in the Makefile in order for text size to
stay as is.

  [1] https://bugs.llvm.org/show_bug.cgi?id=18538

Reported-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Richard Smith <richard-llvm@metafoo.co.uk>
Cc: Chandler Carruth <chandlerc@gmail.com>
Cc: linux-kernel@vger.kernel.org
Tested-by: Prasad Sodagudi <psodagud@codeaurora.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Makefile |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/Makefile
+++ b/Makefile
@@ -790,6 +790,15 @@ KBUILD_CFLAGS += $(call cc-disable-warni
 # disable invalid "can't wrap" optimizations for signed / pointers
 KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
 
+# clang sets -fmerge-all-constants by default as optimization, but this
+# is non-conforming behavior for C and in fact breaks the kernel, so we
+# need to disable it here generally.
+KBUILD_CFLAGS	+= $(call cc-option,-fno-merge-all-constants)
+
+# for gcc -fno-merge-all-constants disables everything, but it is fine
+# to have actual conforming behavior enabled.
+KBUILD_CFLAGS	+= $(call cc-option,-fmerge-constants)
+
 # Make sure -fstack-check isn't enabled (like gentoo apparently did)
 KBUILD_CFLAGS  += $(call cc-option,-fno-stack-check,)
 

[PATCH 4.9 66/67] bpf: skip unnecessary capability check

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chenbo Feng <fengc@google.com>

commit 0fa4fe85f4724fff89b09741c437cbee9cf8b008 upstream.

The current check statement in BPF syscall will do a capability check
for CAP_SYS_ADMIN before checking sysctl_unprivileged_bpf_disabled. This
code path will trigger unnecessary security hooks on capability checking
and cause false alarms on unprivileged process trying to get CAP_SYS_ADMIN
access. This can be resolved by simply switch the order of the statement
and CAP_SYS_ADMIN is not required anyway if unprivileged bpf syscall is
allowed.

Signed-off-by: Chenbo Feng <fengc@google.com>
Acked-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/bpf/syscall.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -801,7 +801,7 @@ SYSCALL_DEFINE3(bpf, int, cmd, union bpf
 	union bpf_attr attr = {};
 	int err;
 
-	if (!capable(CAP_SYS_ADMIN) && sysctl_unprivileged_bpf_disabled)
+	if (sysctl_unprivileged_bpf_disabled && !capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
 	if (!access_ok(VERIFY_READ, uattr, 1))

[PATCH 4.9 67/67] bpf, x64: increase number of passes

[Greg Kroah-Hartman]

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Borkmann <daniel@iogearbox.net>

commit 6007b080d2e2adb7af22bf29165f0594ea12b34c upstream.

In Cilium some of the main programs we run today are hitting 9 passes
on x64's JIT compiler, and we've had cases already where we surpassed
the limit where the JIT then punts the program to the interpreter
instead, leading to insertion failures due to CONFIG_BPF_JIT_ALWAYS_ON
or insertion failures due to the prog array owner being JITed but the
program to insert not (both must have the same JITed/non-JITed property).

One concrete case the program image shrunk from 12,767 bytes down to
10,288 bytes where the image converged after 16 steps. I've measured
that this took 340us in the JIT until it converges on my i7-6600U. Thus,
increase the original limit we had from day one where the JIT covered
cBPF only back then before we run into the case (as similar with the
complexity limit) where we trip over this and hit program rejections.
Also add a cond_resched() into the compilation loop, the JIT process
runs without any locks and may sleep anyway.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/net/bpf_jit_comp.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -1135,7 +1135,7 @@ struct bpf_prog *bpf_int_jit_compile(str
 	 * may converge on the last pass. In such case do one more
 	 * pass to emit the final image
 	 */
-	for (pass = 0; pass < 10 || image; pass++) {
+	for (pass = 0; pass < 20 || image; pass++) {
 		proglen = do_jit(prog, addrs, image, oldproglen, &ctx);
 		if (proglen <= 0) {
 			image = NULL;
@@ -1162,6 +1162,7 @@ struct bpf_prog *bpf_int_jit_compile(str
 			}
 		}
 		oldproglen = proglen;
+		cond_resched();
 	}
 
 	if (bpf_jit_enable > 1)

Re: [PATCH 4.9 00/67] 4.9.91-stable review

[Shuah Khan]

On 03/27/2018 10:26 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.91 release.
> There are 67 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Mar 29 16:27:08 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.91-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 4.9 00/67] 4.9.91-stable review

[kernelci.org bot]

stable-rc/linux-4.9.y boot: 118 boots: 0 failed, 106 passed with 10 offline, 2 untried/unknown (v4.9.90-68-gf6c4b8eea9f0)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.9.y/kernel/v4.9.90-68-gf6c4b8eea9f0/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.9.y/kernel/v4.9.90-68-gf6c4b8eea9f0/

Tree: stable-rc
Branch: linux-4.9.y
Git Describe: v4.9.90-68-gf6c4b8eea9f0
Git Commit: f6c4b8eea9f0ff250efcd95723cd73b8f2ecfef6
Git URL: http://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 61 unique boards, 22 SoC families, 19 builds out of 183

Offline Platforms:

arm:

    sunxi_defconfig:
        sun7i-a20-bananapi: 1 offline lab
        sun7i-a20-cubietruck: 1 offline lab

    multi_v7_defconfig:
        exynos5410-odroidxu: 1 offline lab
        sun7i-a20-cubietruck: 1 offline lab
        tegra20-iris-512: 1 offline lab
        tegra30-beaver: 1 offline lab

    exynos_defconfig:
        exynos5410-odroidxu: 1 offline lab

    tegra_defconfig:
        tegra20-iris-512: 1 offline lab
        tegra30-beaver: 1 offline lab

arm64:

    defconfig:
        meson-gxbb-odroidc2: 1 offline lab

---
For more info write to <info@kernelci.org>

Re: [PATCH 4.9 00/67] 4.9.91-stable review

[Dan Rue]

On Tue, Mar 27, 2018 at 06:26:52PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.91 release.
> There are 67 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Mar 29 16:27:08 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.91-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.

Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.

Summary
------------------------------------------------------------------------

kernel: 4.9.91-rc1
git repo:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: f6c4b8eea9f0ff250efcd95723cd73b8f2ecfef6
git describe: v4.9.90-68-gf6c4b8eea9f0
Test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.90-68-gf6c4b8eea9f0


No regressions (compared to build v4.9.90)

Boards, architectures and test suites:
-------------------------------------

dragonboard-410c
* boot - pass: 20
* kselftest - skip: 27, pass: 36
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 2, pass: 61
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 1, pass: 21
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - pass: 14
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 148, pass: 1002
* ltp-timers-tests - skip: 1, pass: 12

hi6220-hikey - arm64
* boot - pass: 20
* kselftest - skip: 24, pass: 39
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 2, pass: 61
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 1, pass: 21
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 4, pass: 10
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 151, pass: 999
* ltp-timers-tests - skip: 1, pass: 12

juno-r2 - arm64
* boot - pass: 20
* kselftest - skip: 23, pass: 40
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 2, pass: 61
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 4, pass: 10
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 149, pass: 1001
* ltp-timers-tests - skip: 1, pass: 12

qemu_x86_64
* boot - pass: 21
* kselftest - skip: 28, pass: 52
* kselftest-vsyscall-mode-native - skip: 28, pass: 52
* kselftest-vsyscall-mode-none - skip: 28, pass: 52
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 6, pass: 57
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 1, pass: 13
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 149, pass: 1001
* ltp-timers-tests - skip: 1, pass: 12

x15 - arm
* boot - pass: 20
* kselftest - skip: 24, pass: 38
* libhugetlbfs - skip: 1, pass: 87
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 2, pass: 61
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - skip: 2, pass: 20
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 1, pass: 13
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 97, pass: 1053
* ltp-timers-tests - skip: 1, pass: 12

x86_64
* boot - pass: 22
* kselftest - skip: 24, fail: 1, pass: 54
* kselftest-vsyscall-mode-native - skip: 24, fail: 1, pass: 54
* kselftest-vsyscall-mode-none - skip: 25, fail: 2, pass: 53
* libhugetlbfs - skip: 1, pass: 90
* ltp-cap_bounds-tests - pass: 2
* ltp-containers-tests - skip: 17, pass: 64
* ltp-fcntl-locktests-tests - pass: 2
* ltp-filecaps-tests - pass: 2
* ltp-fs-tests - skip: 1, pass: 62
* ltp-fs_bind-tests - pass: 2
* ltp-fs_perms_simple-tests - pass: 19
* ltp-fsx-tests - pass: 2
* ltp-hugetlb-tests - pass: 22
* ltp-io-tests - pass: 3
* ltp-ipc-tests - pass: 9
* ltp-math-tests - pass: 11
* ltp-nptl-tests - pass: 2
* ltp-pty-tests - pass: 4
* ltp-sched-tests - skip: 5, pass: 9
* ltp-securebits-tests - pass: 4
* ltp-syscalls-tests - skip: 119, pass: 1031
* ltp-timers-tests - skip: 1, pass: 12


--
Linaro QA (beta)
https://qa-reports.linaro.org

Re: [PATCH 4.9 00/67] 4.9.91-stable review

[Greg Kroah-Hartman]

On Tue, Mar 27, 2018 at 08:35:01PM -0500, Dan Rue wrote:
> qemu_x86_64
> * boot - pass: 21
> * kselftest - skip: 28, pass: 52

Do you have a list of what you are skipping anywhere?  There was some
x86 changes that I had to backport that I was worried about getting
right here, are you running the x86 kselftests?

thanks,

greg k-h

Re: [PATCH 4.9 00/67] 4.9.91-stable review

[Dan Rue]

On Wed, Mar 28, 2018 at 10:21:45AM +0200, Greg Kroah-Hartman wrote:
> On Tue, Mar 27, 2018 at 08:35:01PM -0500, Dan Rue wrote:
> > qemu_x86_64
> > * boot - pass: 21
> > * kselftest - skip: 28, pass: 52
> 
> Do you have a list of what you are skipping anywhere?  There was some
> x86 changes that I had to backport that I was worried about getting
> right here, are you running the x86 kselftests?

Yes we run the x86 selftests. Here's the full list of what ran and what was
skipped. Remember (I know you know, but for anyone else observing), we
run kselftest from 4.15.

 breakpoint_test — SKIP
 efivarfs.sh — SKIP
 fsgsbase_64 — SKIP
 ftracetest — SKIP
 fw_fallback.sh — SKIP
 fw_filesystem.sh — SKIP
 gpio-mockup.sh — SKIP
 ldt_gdt_64 — SKIP
 main.sh — SKIP
 mem-on-off-test.sh — SKIP
 pstore_tests — SKIP
 reuseport_bpf — SKIP
 run.sh — SKIP
 run_vmtests — SKIP
 seccomp_bpf — SKIP
 sigreturn_64 — SKIP
 step_after_suspend_test — SKIP
 sync_test — SKIP
 sysctl.sh — SKIP
 test_align — SKIP
 test_dev_cgroup — SKIP
 test_kmod.sh — SKIP
 test_lpm_map — SKIP
 test_lru_map — SKIP
 test_maps — SKIP
 test_progs — SKIP
 test_tag — SKIP
 test_verifier — SKIP
 5lvl_64 — PASS
 bitmap.sh — PASS
 check_initial_reg_state_64 — PASS
 cpu-on-off-test.sh — PASS
 default_file_splice_read.sh — PASS
 execveat — PASS
 get_size — PASS
 inconsistency-check — PASS
 ioperm_64 — PASS
 iopl_64 — PASS
 kcmp_test — PASS
 membarrier_test — PASS
 mpx-mini-test_64 — PASS
 mqueue-lat — PASS
 msgque — PASS
 nanosleep — PASS
 netdevice.sh — PASS
 nsleep-lat — PASS
 owner — PASS
 peeksiginfo — PASS
 pidns — PASS
 posix_timers — PASS
 printf.sh — PASS
 protection_keys_64 — PASS
 pstore_post_reboot_tests — PASS
 ptrace_syscall_64 — PASS
 raw_skew — PASS
 reuseaddr_conflict — PASS
 reuseport_dualstack — PASS
 rtctest — PASS
 rtnetlink.sh — PASS
 run_afpackettests — PASS
 run_netsocktests — PASS
 run_tests.sh — PASS
 sas — PASS
 seccomp_benchmark — PASS
 set-timer-lat — PASS
 single_step_syscall_64 — PASS
 syscall_nt_64 — PASS
 sysret_rip_64 — PASS
 sysret_ss_attrs_64 — PASS
 test_bpf.sh — PASS
 test_execve — PASS
 test_mremap_vdso_64 — PASS
 test_static_keys.sh — PASS
 test_user_copy.sh — PASS
 test_vdso_64 — PASS
 test_vsyscall_64 — PASS
 test_xdp_meta.sh — PASS
 test_xdp_redirect.sh — PASS
 threadtest — PASS
 zram.sh — PASS

 Dan

Re: [PATCH 4.9 00/67] 4.9.91-stable review

[Greg Kroah-Hartman]

On Wed, Mar 28, 2018 at 10:50:35AM -0500, Dan Rue wrote:
> On Wed, Mar 28, 2018 at 10:21:45AM +0200, Greg Kroah-Hartman wrote:
> > On Tue, Mar 27, 2018 at 08:35:01PM -0500, Dan Rue wrote:
> > > qemu_x86_64
> > > * boot - pass: 21
> > > * kselftest - skip: 28, pass: 52
> > 
> > Do you have a list of what you are skipping anywhere?  There was some
> > x86 changes that I had to backport that I was worried about getting
> > right here, are you running the x86 kselftests?
> 
> Yes we run the x86 selftests. Here's the full list of what ran and what was
> skipped. Remember (I know you know, but for anyone else observing), we
> run kselftest from 4.15.

That's good, as kselftest from 4.9 was a bit broken for x86, which is
why I backported a bunch of patches for it for this release :)

>  breakpoint_test — SKIP
>  efivarfs.sh — SKIP
>  fsgsbase_64 — SKIP
>  ftracetest — SKIP
>  fw_fallback.sh — SKIP
>  fw_filesystem.sh — SKIP
>  gpio-mockup.sh — SKIP
>  ldt_gdt_64 — SKIP
>  main.sh — SKIP
>  mem-on-off-test.sh — SKIP
>  pstore_tests — SKIP
>  reuseport_bpf — SKIP
>  run.sh — SKIP
>  run_vmtests — SKIP
>  seccomp_bpf — SKIP
>  sigreturn_64 — SKIP
>  step_after_suspend_test — SKIP
>  sync_test — SKIP
>  sysctl.sh — SKIP
>  test_align — SKIP
>  test_dev_cgroup — SKIP
>  test_kmod.sh — SKIP
>  test_lpm_map — SKIP
>  test_lru_map — SKIP
>  test_maps — SKIP
>  test_progs — SKIP
>  test_tag — SKIP
>  test_verifier — SKIP

Figuring out of any of these are from the tools/testing/selftests/x86/
directory is a pain, that is the tests I was referring to here...

That being said, why are you skipping so many?  ldt_gdt_64 should be
run, what fails with it?  Same for sigreturn_64, which I think means
that only 2 tests from the x86 directory are being skipped, right?

Have you gone back and looked at any of those other tests to see why
they are being skipped?

thanks,

greg k-h

Re: [PATCH 4.9 00/67] 4.9.91-stable review

[Dan Rue]

On Wed, Mar 28, 2018 at 06:21:04PM +0200, Greg Kroah-Hartman wrote:
> On Wed, Mar 28, 2018 at 10:50:35AM -0500, Dan Rue wrote:
> > On Wed, Mar 28, 2018 at 10:21:45AM +0200, Greg Kroah-Hartman wrote:
> > > On Tue, Mar 27, 2018 at 08:35:01PM -0500, Dan Rue wrote:
> > > > qemu_x86_64
> > > > * boot - pass: 21
> > > > * kselftest - skip: 28, pass: 52
> > > 
> > > Do you have a list of what you are skipping anywhere?  There was some
> > > x86 changes that I had to backport that I was worried about getting
> > > right here, are you running the x86 kselftests?
> > 
> > Yes we run the x86 selftests. Here's the full list of what ran and what was
> > skipped. Remember (I know you know, but for anyone else observing), we
> > run kselftest from 4.15.
> 
> That's good, as kselftest from 4.9 was a bit broken for x86, which is
> why I backported a bunch of patches for it for this release :)

I've noticed these backports. Should we expect to see selftests
supported in LTS kernels going forward? What is the current policy on
taking selftest backports?

> 
> >  breakpoint_test — SKIP
> >  efivarfs.sh — SKIP
> >  fsgsbase_64 — SKIP
> >  ftracetest — SKIP
> >  fw_fallback.sh — SKIP
> >  fw_filesystem.sh — SKIP
> >  gpio-mockup.sh — SKIP
> >  ldt_gdt_64 — SKIP
> >  main.sh — SKIP
> >  mem-on-off-test.sh — SKIP
> >  pstore_tests — SKIP
> >  reuseport_bpf — SKIP
> >  run.sh — SKIP
> >  run_vmtests — SKIP
> >  seccomp_bpf — SKIP
> >  sigreturn_64 — SKIP
> >  step_after_suspend_test — SKIP
> >  sync_test — SKIP
> >  sysctl.sh — SKIP
> >  test_align — SKIP
> >  test_dev_cgroup — SKIP
> >  test_kmod.sh — SKIP
> >  test_lpm_map — SKIP
> >  test_lru_map — SKIP
> >  test_maps — SKIP
> >  test_progs — SKIP
> >  test_tag — SKIP
> >  test_verifier — SKIP
> 
> Figuring out of any of these are from the tools/testing/selftests/x86/
> directory is a pain, that is the tests I was referring to here...

Agree. It would be nice if we preserved the directory name - I had the
same issue when trying to answer your question.

> 
> That being said, why are you skipping so many?  ldt_gdt_64 should be
> run, what fails with it?  Same for sigreturn_64, which I think means
> that only 2 tests from the x86 directory are being skipped, right?
> 
> Have you gone back and looked at any of those other tests to see why
> they are being skipped?

I'll try to keep this short - the tl;dr is that it's historical, and
something we're fixing now.

Originally, we just skipped everything that failed so that we could
focus on regressions. As new things failed, we have investigated them
and reported them upstream or fixed with patches. Over time, many of
these original failures have been resolved but the skipfiles may not
have been updated because...

Our skipfiles are per-branch and per-board, and we used to have one file
for each combination, resulting in dozens of files that ended up with
inconsistencies between them over time. So, we converted it to a
structured data format that is then parsed at runtime to generate a
skipfile for a given board/branch combination.

That work was just completed a couple weeks ago. Now that our kselftest
skipfile is a single structured data file[1], we need to go through it
and resolve all of the inconsistencies, remove the skips that have long
since been resolved, etc. This is work we plan to do in the next couple
weeks.

If you look through that file, you'll see quite a few things that are
wrong. When we're done auditing it, each skip should have a coherent
"reason" for skipping and an accurate branch/board list.

With regard to the specific tests you asked about:
- ldt_gdt_64: As of 4.9.89 this is still failing. I'll test again with
  the new RC.
- sigreturn_64: Passing on x86_64 (real hardware) and getting skipped on
  qemu x86_64. For some reason it fails intermittently on qemu in our
  environment.

Hope that helps,
Dan

[1] https://git.linaro.org/qa/test-definitions.git/tree/automated/linux/kselftest/skipfile-lkft.yaml

Re: [PATCH 4.9 00/67] 4.9.91-stable review

[Greg Kroah-Hartman]

On Wed, Mar 28, 2018 at 01:28:28PM -0500, Dan Rue wrote:
> On Wed, Mar 28, 2018 at 06:21:04PM +0200, Greg Kroah-Hartman wrote:
> > On Wed, Mar 28, 2018 at 10:50:35AM -0500, Dan Rue wrote:
> > > On Wed, Mar 28, 2018 at 10:21:45AM +0200, Greg Kroah-Hartman wrote:
> > > > On Tue, Mar 27, 2018 at 08:35:01PM -0500, Dan Rue wrote:
> > > > > qemu_x86_64
> > > > > * boot - pass: 21
> > > > > * kselftest - skip: 28, pass: 52
> > > > 
> > > > Do you have a list of what you are skipping anywhere?  There was some
> > > > x86 changes that I had to backport that I was worried about getting
> > > > right here, are you running the x86 kselftests?
> > > 
> > > Yes we run the x86 selftests. Here's the full list of what ran and what was
> > > skipped. Remember (I know you know, but for anyone else observing), we
> > > run kselftest from 4.15.
> > 
> > That's good, as kselftest from 4.9 was a bit broken for x86, which is
> > why I backported a bunch of patches for it for this release :)
> 
> I've noticed these backports. Should we expect to see selftests
> supported in LTS kernels going forward? What is the current policy on
> taking selftest backports?

I applied patches that prevented the x86 patches from even being built
on a modern system (i.e. my laptop).  I didn't add any new
functionality, I just wanted to verify that there were no regressions,
which is hard to do when the tests do not build.

As for what to run, yes, use the latest possible seems like the best
solution so far.

thanks,

greg k-h

Re: [PATCH 4.9 00/67] 4.9.91-stable review

[Guenter Roeck]

On 03/27/2018 09:26 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.91 release.
> There are 67 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Mar 29 16:27:08 UTC 2018.
> Anything received after that time might be too late.
> 

Build results:
	total: 145 pass: 145 fail: 0
Qemu test results:
	total: 137 pass: 137 fail: 0

Guenter