[PATCH net-next v3 6/7] MIPS: mscc: connect phys to ports on ocelot_pcb123

From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: "David S . Miller" <davem@davemloft.net>
Cc: Allan Nielsen <Allan.Nielsen@microsemi.com>,
	razvan.stefanescu@nxp.com, po.liu@nxp.com,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-mips@linux-mips.org,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	James Hogan <jhogan@kernel.org>
Subject: [PATCH net-next v3 6/7] MIPS: mscc: connect phys to ports on ocelot_pcb123
Date: Mon, 14 May 2018 22:04:59 +0200	[thread overview]
Message-ID: <20180514200500.2953-7-alexandre.belloni@bootlin.com> (raw)
In-Reply-To: <20180514200500.2953-1-alexandre.belloni@bootlin.com>

Add phy to switch port connections for PCB123 for internal PHYs.

Cc: James Hogan <jhogan@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 arch/mips/boot/dts/mscc/ocelot_pcb123.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
index 29d6414f8886..4ccd65379059 100644
--- a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
@@ -25,3 +25,23 @@
 &uart2 {
 	status = "okay";
 };
+
+&mdio0 {
+	status = "okay";
+};
+
+&port0 {
+	phy-handle = <&phy0>;
+};
+
+&port1 {
+	phy-handle = <&phy1>;
+};
+
+&port2 {
+	phy-handle = <&phy2>;
+};
+
+&port3 {
+	phy-handle = <&phy3>;
+};
-- 
2.17.0
