* [PATCH v2] PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes
@ 2018-06-19 17:19 Geert Uytterhoeven
2018-06-20 9:22 ` Gustavo Pimentel
2018-06-29 13:40 ` Lorenzo Pieralisi
0 siblings, 2 replies; 3+ messages in thread
From: Geert Uytterhoeven @ 2018-06-19 17:19 UTC (permalink / raw)
To: Gustavo Pimentel, Lorenzo Pieralisi, Bjorn Helgaas
Cc: linux-pci, linux-kernel, Geert Uytterhoeven
PCIE_DW_PLAT_HOST does not have any platform dependency, so it should
not default to yes.
Fixes: 1d906b22076e12cf ("PCI: dwc: Add support for EP mode")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
- Rebased on top of the big PCI controller move.
---
drivers/pci/controller/dwc/Kconfig | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 16f52c626b4bd510..91b0194240a57e8f 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -58,7 +58,6 @@ config PCIE_DW_PLAT_HOST
depends on PCI && PCI_MSI_IRQ_DOMAIN
select PCIE_DW_HOST
select PCIE_DW_PLAT
- default y
help
Enables support for the PCIe controller in the Designware IP to
work in host mode. There are two instances of PCIe controller in
--
2.17.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH v2] PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes
2018-06-19 17:19 [PATCH v2] PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes Geert Uytterhoeven
@ 2018-06-20 9:22 ` Gustavo Pimentel
2018-06-29 13:40 ` Lorenzo Pieralisi
1 sibling, 0 replies; 3+ messages in thread
From: Gustavo Pimentel @ 2018-06-20 9:22 UTC (permalink / raw)
To: Geert Uytterhoeven, Gustavo Pimentel, Lorenzo Pieralisi, Bjorn Helgaas
Cc: linux-pci, linux-kernel
Hi Geert,
On 19/06/2018 18:19, Geert Uytterhoeven wrote:
> PCIE_DW_PLAT_HOST does not have any platform dependency, so it should
> not default to yes.
That's right, thanks.
Regards,
Gustavo
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
>
> Fixes: 1d906b22076e12cf ("PCI: dwc: Add support for EP mode")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> v2:
> - Rebased on top of the big PCI controller move.
> ---
> drivers/pci/controller/dwc/Kconfig | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> index 16f52c626b4bd510..91b0194240a57e8f 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -58,7 +58,6 @@ config PCIE_DW_PLAT_HOST
> depends on PCI && PCI_MSI_IRQ_DOMAIN
> select PCIE_DW_HOST
> select PCIE_DW_PLAT
> - default y
> help
> Enables support for the PCIe controller in the Designware IP to
> work in host mode. There are two instances of PCIe controller in
>
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH v2] PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes
2018-06-19 17:19 [PATCH v2] PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes Geert Uytterhoeven
2018-06-20 9:22 ` Gustavo Pimentel
@ 2018-06-29 13:40 ` Lorenzo Pieralisi
1 sibling, 0 replies; 3+ messages in thread
From: Lorenzo Pieralisi @ 2018-06-29 13:40 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Gustavo Pimentel, Bjorn Helgaas, linux-pci, linux-kernel
On Tue, Jun 19, 2018 at 07:19:17PM +0200, Geert Uytterhoeven wrote:
> PCIE_DW_PLAT_HOST does not have any platform dependency, so it should
> not default to yes.
>
> Fixes: 1d906b22076e12cf ("PCI: dwc: Add support for EP mode")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> v2:
> - Rebased on top of the big PCI controller move.
> ---
> drivers/pci/controller/dwc/Kconfig | 1 -
> 1 file changed, 1 deletion(-)
Applied to pci/controller-fixes to be tentatively merged for
-rc4, thanks.
Lorenzo
> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> index 16f52c626b4bd510..91b0194240a57e8f 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -58,7 +58,6 @@ config PCIE_DW_PLAT_HOST
> depends on PCI && PCI_MSI_IRQ_DOMAIN
> select PCIE_DW_HOST
> select PCIE_DW_PLAT
> - default y
> help
> Enables support for the PCIe controller in the Designware IP to
> work in host mode. There are two instances of PCIe controller in
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-06-29 13:39 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-06-19 17:19 [PATCH v2] PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes Geert Uytterhoeven
2018-06-20 9:22 ` Gustavo Pimentel
2018-06-29 13:40 ` Lorenzo Pieralisi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).