[PATCH 4.18 37/79] x86/KVM/VMX: Add L1D flush algorithm

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Bonzini <pbonzini@redhat.com>

To mitigate the L1 Terminal Fault vulnerability it's required to flush L1D
on VMENTER to prevent rogue guests from snooping host memory.

CPUs will have a new control MSR via a microcode update to flush L1D with a
single MSR write, but in the absence of microcode a fallback to a software
based flush algorithm is required.

Add a software flush loop which is based on code from Intel.

[ tglx: Split out from combo patch ]
[ bpetkov: Polish the asm code ]

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/x86/kvm/vmx.c |   71 +++++++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 66 insertions(+), 5 deletions(-)

--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -9599,6 +9599,46 @@ static int vmx_handle_exit(struct kvm_vc
 	}
 }
 
+/*
+ * Software based L1D cache flush which is used when microcode providing
+ * the cache control MSR is not loaded.
+ *
+ * The L1D cache is 32 KiB on Nehalem and later microarchitectures, but to
+ * flush it is required to read in 64 KiB because the replacement algorithm
+ * is not exactly LRU. This could be sized at runtime via topology
+ * information but as all relevant affected CPUs have 32KiB L1D cache size
+ * there is no point in doing so.
+ */
+#define L1D_CACHE_ORDER 4
+static void *vmx_l1d_flush_pages;
+
+static void __maybe_unused vmx_l1d_flush(void)
+{
+	int size = PAGE_SIZE << L1D_CACHE_ORDER;
+
+	asm volatile(
+		/* First ensure the pages are in the TLB */
+		"xorl	%%eax, %%eax\n"
+		".Lpopulate_tlb:\n\t"
+		"movzbl	(%[empty_zp], %%" _ASM_AX "), %%ecx\n\t"
+		"addl	$4096, %%eax\n\t"
+		"cmpl	%%eax, %[size]\n\t"
+		"jne	.Lpopulate_tlb\n\t"
+		"xorl	%%eax, %%eax\n\t"
+		"cpuid\n\t"
+		/* Now fill the cache */
+		"xorl	%%eax, %%eax\n"
+		".Lfill_cache:\n"
+		"movzbl	(%[empty_zp], %%" _ASM_AX "), %%ecx\n\t"
+		"addl	$64, %%eax\n\t"
+		"cmpl	%%eax, %[size]\n\t"
+		"jne	.Lfill_cache\n\t"
+		"lfence\n"
+		:: [empty_zp] "r" (vmx_l1d_flush_pages),
+		    [size] "r" (size)
+		: "eax", "ebx", "ecx", "edx");
+}
+
 static void update_cr8_intercept(struct kvm_vcpu *vcpu, int tpr, int irr)
 {
 	struct vmcs12 *vmcs12 = get_vmcs12(vcpu);
@@ -13198,13 +13238,29 @@ static struct kvm_x86_ops vmx_x86_ops __
 	.enable_smi_window = enable_smi_window,
 };
 
-static void __init vmx_setup_l1d_flush(void)
+static int __init vmx_setup_l1d_flush(void)
 {
+	struct page *page;
+
 	if (vmentry_l1d_flush == VMENTER_L1D_FLUSH_NEVER ||
 	    !boot_cpu_has_bug(X86_BUG_L1TF))
-		return;
+		return 0;
+
+	page = alloc_pages(GFP_KERNEL, L1D_CACHE_ORDER);
+	if (!page)
+		return -ENOMEM;
 
+	vmx_l1d_flush_pages = page_address(page);
 	static_branch_enable(&vmx_l1d_should_flush);
+	return 0;
+}
+
+static void vmx_free_l1d_flush_pages(void)
+{
+	if (vmx_l1d_flush_pages) {
+		free_pages((unsigned long)vmx_l1d_flush_pages, L1D_CACHE_ORDER);
+		vmx_l1d_flush_pages = NULL;
+	}
 }
 
 static int __init vmx_init(void)
@@ -13240,12 +13296,16 @@ static int __init vmx_init(void)
 	}
 #endif
 
-	vmx_setup_l1d_flush();
+	r = vmx_setup_l1d_flush();
+	if (r)
+		return r;
 
 	r = kvm_init(&vmx_x86_ops, sizeof(struct vcpu_vmx),
-                     __alignof__(struct vcpu_vmx), THIS_MODULE);
-	if (r)
+		     __alignof__(struct vcpu_vmx), THIS_MODULE);
+	if (r) {
+		vmx_free_l1d_flush_pages();
 		return r;
+	}
 
 #ifdef CONFIG_KEXEC_CORE
 	rcu_assign_pointer(crash_vmclear_loaded_vmcss,
@@ -13287,6 +13347,7 @@ static void __exit vmx_exit(void)
 		static_branch_disable(&enable_evmcs);
 	}
 #endif
+	vmx_free_l1d_flush_pages();
 }
 
 module_init(vmx_init)