[PATCH 4.18 00/35] 4.18.4-stable review

[PATCH 4.18 00/35] 4.18.4-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.18.4 release.
There are 35 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu Aug 23 05:50:07 UTC 2018.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.18.4-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.18.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.18.4-rc1

Hangbin Liu <liuhangbin@gmail.com>
    cls_matchall: fix tcf_unbind_filter missing

Jisheng Zhang <Jisheng.Zhang@synaptics.com>
    net: mvneta: fix mvneta_config_rss on armada 3700

Andrew Lunn <andrew@lunn.ch>
    net: ethernet: mvneta: Fix napi structure mixup on armada 3700

Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
    ip_vti: fix a null pointer deferrence when create vti fallback tunnel

Jian-Hong Pan <jian-hong@endlessm.com>
    r8169: don't use MSI-X on RTL8106e

Takashi Iwai <tiwai@suse.de>
    hv/netvsc: Fix NULL dereference at single queue mode fallback

Jeremy Cline <jcline@redhat.com>
    net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()

Kees Cook <keescook@chromium.org>
    isdn: Disable IIOCDBGVAR

Sudip Mukherjee <sudipm.mukherjee@gmail.com>
    Bluetooth: avoid killing an already killed socket

Xiubo Li <xiubli@redhat.com>
    Revert "uio: use request_threaded_irq instead"

Johan Hovold <johan@kernel.org>
    misc: sram: fix resource leaks in probe error path

Hailong Liu <liu.hailong6@zte.com.cn>
    uio: fix wrong return value from uio_mmap()

Srinath Mannam <srinath.mannam@broadcom.com>
    serial: 8250_dw: Add ACPI support for uart on Broadcom SoC

Chen Hu <hu1.chen@intel.com>
    serial: 8250_dw: always set baud rate in dw8250_set_termios

Aaron Sierra <asierra@xes-inc.com>
    serial: 8250_exar: Read INT0 from slave device, too

Mark <dmarkh@cfl.rr.com>
    tty: serial: 8250: Revert NXP SC16C2552 workaround

Willy Tarreau <w@1wt.eu>
    ACPI / PM: save NVS memory for ASUS 1025C laptop

Aleksander Morgado <aleksander@aleksander.es>
    USB: option: add support for DW5821e

Movie Song <MovieSong@aten-itlab.cn>
    USB: serial: pl2303: add a new device id for ATEN

John Ogness <john.ogness@linutronix.de>
    USB: serial: sierra: fix potential deadlock at close

Mika Båtsman <mika.batsman@gmail.com>
    media: gl861: fix probe of dvb_usb_gl861

Takashi Iwai <tiwai@suse.de>
    ALSA: seq: Fix poll() error return

Takashi Iwai <tiwai@suse.de>
    ALSA: vxpocket: Fix invalid endian conversions

Takashi Iwai <tiwai@suse.de>
    ALSA: memalloc: Don't exceed over the requested size

Hans de Goede <hdegoede@redhat.com>
    ALSA: hda: Correct Asrock B85M-ITX power_save blacklist entry

Takashi Sakamoto <o-takashi@sakamocchi.jp>
    ALSA: dice: fix wrong copy to rx parameters for Alesis iO26

Takashi Iwai <tiwai@suse.de>
    ALSA: cs5535audio: Fix invalid endian conversion

Takashi Iwai <tiwai@suse.de>
    ALSA: virmidi: Fix too long output trigger loop

Takashi Iwai <tiwai@suse.de>
    ALSA: vx222: Fix invalid endian conversions

Park Ju Hyung <qkrwngud825@gmail.com>
    ALSA: hda - Turn CX8200 into D3 as well upon reboot

Park Ju Hyung <qkrwngud825@gmail.com>
    ALSA: hda - Sleep for 10ms after entering D3 on Conexant codecs

Heiner Kallweit <hkallweit1@gmail.com>
    r8169: don't use MSI-X on RTL8168g

Hangbin Liu <liuhangbin@gmail.com>
    net_sched: Fix missing res info when create new tc_index filter

Hangbin Liu <liuhangbin@gmail.com>
    net_sched: fix NULL pointer dereference when delete tcindex filter

Wei Wang <weiwan@google.com>
    l2tp: use sk_dst_check() to avoid race on sk->sk_dst_cache


-------------

Diffstat:

 Makefile                                |  4 +--
 drivers/acpi/sleep.c                    |  8 +++++
 drivers/isdn/i4l/isdn_common.c          |  8 +----
 drivers/media/usb/dvb-usb-v2/gl861.c    | 21 +++++++------
 drivers/misc/sram.c                     |  9 +++++-
 drivers/net/ethernet/marvell/mvneta.c   | 53 ++++++++++++++++++++-------------
 drivers/net/ethernet/realtek/r8169.c    | 12 ++++++--
 drivers/net/hyperv/rndis_filter.c       |  2 +-
 drivers/tty/serial/8250/8250_dw.c       |  3 +-
 drivers/tty/serial/8250/8250_exar.c     |  6 +++-
 drivers/tty/serial/8250/8250_port.c     |  3 +-
 drivers/uio/uio.c                       | 10 ++-----
 drivers/usb/serial/option.c             |  4 +++
 drivers/usb/serial/pl2303.c             |  2 ++
 drivers/usb/serial/pl2303.h             |  1 +
 drivers/usb/serial/sierra.c             |  4 +--
 net/bluetooth/sco.c                     |  3 +-
 net/core/sock_diag.c                    |  2 ++
 net/ipv4/ip_vti.c                       |  3 +-
 net/l2tp/l2tp_core.c                    |  2 +-
 net/sched/cls_matchall.c                |  2 ++
 net/sched/cls_tcindex.c                 |  8 ++---
 net/socket.c                            |  3 +-
 sound/core/memalloc.c                   |  8 ++---
 sound/core/seq/oss/seq_oss.c            |  2 +-
 sound/core/seq/seq_clientmgr.c          |  2 +-
 sound/core/seq/seq_virmidi.c            | 10 +++++++
 sound/firewire/dice/dice-alesis.c       |  2 +-
 sound/pci/cs5535audio/cs5535audio.h     |  6 ++--
 sound/pci/cs5535audio/cs5535audio_pcm.c |  4 +--
 sound/pci/hda/hda_intel.c               |  2 +-
 sound/pci/hda/patch_conexant.c          |  4 ++-
 sound/pci/vx222/vx222_ops.c             |  8 ++---
 sound/pcmcia/vx/vxp_ops.c               | 10 +++----
 34 files changed, 138 insertions(+), 93 deletions(-)

[PATCH 4.18 01/35] l2tp: use sk_dst_check() to avoid race on sk->sk_dst_cache

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wei Wang <weiwan@google.com>

[ Upstream commit 6d37fa49da1e8db8fb1995be22ac837ca41ac8a8 ]

In l2tp code, if it is a L2TP_UDP_ENCAP tunnel, tunnel->sk points to a
UDP socket. User could call sendmsg() on both this tunnel and the UDP
socket itself concurrently. As l2tp_xmit_skb() holds socket lock and call
__sk_dst_check() to refresh sk->sk_dst_cache, while udpv6_sendmsg() is
lockless and call sk_dst_check() to refresh sk->sk_dst_cache, there
could be a race and cause the dst cache to be freed multiple times.
So we fix l2tp side code to always call sk_dst_check() to garantee
xchg() is called when refreshing sk->sk_dst_cache to avoid race
conditions.

Syzkaller reported stack trace:
BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:21 [inline]
BUG: KASAN: use-after-free in atomic_fetch_add_unless include/linux/atomic.h:575 [inline]
BUG: KASAN: use-after-free in atomic_add_unless include/linux/atomic.h:597 [inline]
BUG: KASAN: use-after-free in dst_hold_safe include/net/dst.h:308 [inline]
BUG: KASAN: use-after-free in ip6_hold_safe+0xe6/0x670 net/ipv6/route.c:1029
Read of size 4 at addr ffff8801aea9a880 by task syz-executor129/4829

CPU: 0 PID: 4829 Comm: syz-executor129 Not tainted 4.18.0-rc7-next-20180802+ #30
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0x242/0x30d mm/kasan/report.c:412
 check_memory_region_inline mm/kasan/kasan.c:260 [inline]
 check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
 kasan_check_read+0x11/0x20 mm/kasan/kasan.c:272
 atomic_read include/asm-generic/atomic-instrumented.h:21 [inline]
 atomic_fetch_add_unless include/linux/atomic.h:575 [inline]
 atomic_add_unless include/linux/atomic.h:597 [inline]
 dst_hold_safe include/net/dst.h:308 [inline]
 ip6_hold_safe+0xe6/0x670 net/ipv6/route.c:1029
 rt6_get_pcpu_route net/ipv6/route.c:1249 [inline]
 ip6_pol_route+0x354/0xd20 net/ipv6/route.c:1922
 ip6_pol_route_output+0x54/0x70 net/ipv6/route.c:2098
 fib6_rule_lookup+0x283/0x890 net/ipv6/fib6_rules.c:122
 ip6_route_output_flags+0x2c5/0x350 net/ipv6/route.c:2126
 ip6_dst_lookup_tail+0x1278/0x1da0 net/ipv6/ip6_output.c:978
 ip6_dst_lookup_flow+0xc8/0x270 net/ipv6/ip6_output.c:1079
 ip6_sk_dst_lookup_flow+0x5ed/0xc50 net/ipv6/ip6_output.c:1117
 udpv6_sendmsg+0x2163/0x36b0 net/ipv6/udp.c:1354
 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798
 sock_sendmsg_nosec net/socket.c:622 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:632
 ___sys_sendmsg+0x51d/0x930 net/socket.c:2115
 __sys_sendmmsg+0x240/0x6f0 net/socket.c:2210
 __do_sys_sendmmsg net/socket.c:2239 [inline]
 __se_sys_sendmmsg net/socket.c:2236 [inline]
 __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2236
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x446a29
Code: e8 ac b8 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f4de5532db8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00000000006dcc38 RCX: 0000000000446a29
RDX: 00000000000000b8 RSI: 0000000020001b00 RDI: 0000000000000003
RBP: 00000000006dcc30 R08: 00007f4de5533700 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dcc3c
R13: 00007ffe2b830fdf R14: 00007f4de55339c0 R15: 0000000000000001

Fixes: 71b1391a4128 ("l2tp: ensure sk->dst is still valid")
Reported-by: syzbot+05f840f3b04f211bad55@syzkaller.appspotmail.com
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Guillaume Nault <g.nault@alphalink.fr>
Cc: David Ahern <dsahern@gmail.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/l2tp/l2tp_core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/l2tp/l2tp_core.c
+++ b/net/l2tp/l2tp_core.c
@@ -1110,7 +1110,7 @@ int l2tp_xmit_skb(struct l2tp_session *s
 
 	/* Get routing info from the tunnel socket */
 	skb_dst_drop(skb);
-	skb_dst_set(skb, dst_clone(__sk_dst_check(sk, 0)));
+	skb_dst_set(skb, sk_dst_check(sk, 0));
 
 	inet = inet_sk(sk);
 	fl = &inet->cork.fl;

[PATCH 4.18 02/35] net_sched: fix NULL pointer dereference when delete tcindex filter

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit 2df8bee5654bb2b7312662ca6810d4dc16b0b67f ]

Li Shuang reported the following crash:

[   71.267724] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
[   71.276456] PGD 800000085d9bd067 P4D 800000085d9bd067 PUD 859a0b067 PMD 0
[   71.284127] Oops: 0000 [#1] SMP PTI
[   71.288015] CPU: 12 PID: 2386 Comm: tc Not tainted 4.18.0-rc8.latest+ #131
[   71.295686] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.1.5 04/11/2016
[   71.304037] RIP: 0010:tcindex_delete+0x72/0x280 [cls_tcindex]
[   71.310446] Code: 00 31 f6 48 87 75 20 48 85 f6 74 11 48 8b 47 18 48 8b 40 08 48 8b 40 50 e8 fb a6 f8 fc 48 85 db 0f 84 dc 00 00 00 48 8b 73 18 <8b> 56 04 48 8d 7e 04 85 d2 0f 84 7b 01 00
[   71.331517] RSP: 0018:ffffb45207b3f898 EFLAGS: 00010282
[   71.337345] RAX: ffff8ad3d72d6360 RBX: ffff8acc84393680 RCX: 000000000000002e
[   71.345306] RDX: ffff8ad3d72c8570 RSI: 0000000000000000 RDI: ffff8ad847a45800
[   71.353277] RBP: ffff8acc84393688 R08: ffff8ad3d72c8400 R09: 0000000000000000
[   71.361238] R10: ffff8ad3de786e00 R11: 0000000000000000 R12: ffffb45207b3f8c7
[   71.369199] R13: ffff8ad3d93bd2a0 R14: 000000000000002e R15: ffff8ad3d72c9600
[   71.377161] FS:  00007f9d3ec3e740(0000) GS:ffff8ad3df980000(0000) knlGS:0000000000000000
[   71.386188] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   71.392597] CR2: 0000000000000004 CR3: 0000000852f06003 CR4: 00000000001606e0
[   71.400558] Call Trace:
[   71.403299]  tcindex_destroy_element+0x25/0x40 [cls_tcindex]
[   71.409611]  tcindex_walk+0xbb/0x110 [cls_tcindex]
[   71.414953]  tcindex_destroy+0x44/0x90 [cls_tcindex]
[   71.420492]  ? tcindex_delete+0x280/0x280 [cls_tcindex]
[   71.426323]  tcf_proto_destroy+0x16/0x40
[   71.430696]  tcf_chain_flush+0x51/0x70
[   71.434876]  tcf_block_put_ext.part.30+0x8f/0x1b0
[   71.440122]  tcf_block_put+0x4d/0x70
[   71.444108]  cbq_destroy+0x4d/0xd0 [sch_cbq]
[   71.448869]  qdisc_destroy+0x62/0x130
[   71.452951]  dsmark_destroy+0x2a/0x70 [sch_dsmark]
[   71.458300]  qdisc_destroy+0x62/0x130
[   71.462373]  qdisc_graft+0x3ba/0x470
[   71.466359]  tc_get_qdisc+0x2a6/0x2c0
[   71.470443]  ? cred_has_capability+0x7d/0x130
[   71.475307]  rtnetlink_rcv_msg+0x263/0x2d0
[   71.479875]  ? rtnl_calcit.isra.30+0x110/0x110
[   71.484832]  netlink_rcv_skb+0x4d/0x130
[   71.489109]  netlink_unicast+0x1a3/0x250
[   71.493482]  netlink_sendmsg+0x2ae/0x3a0
[   71.497859]  sock_sendmsg+0x36/0x40
[   71.501748]  ___sys_sendmsg+0x26f/0x2d0
[   71.506029]  ? handle_pte_fault+0x586/0xdf0
[   71.510694]  ? __handle_mm_fault+0x389/0x500
[   71.515457]  ? __sys_sendmsg+0x5e/0xa0
[   71.519636]  __sys_sendmsg+0x5e/0xa0
[   71.523626]  do_syscall_64+0x5b/0x180
[   71.527711]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   71.533345] RIP: 0033:0x7f9d3e257f10
[   71.537331] Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8
[   71.558401] RSP: 002b:00007fff6f893398 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[   71.566848] RAX: ffffffffffffffda RBX: 000000005b71274d RCX: 00007f9d3e257f10
[   71.574810] RDX: 0000000000000000 RSI: 00007fff6f8933e0 RDI: 0000000000000003
[   71.582770] RBP: 00007fff6f8933e0 R08: 000000000000ffff R09: 0000000000000003
[   71.590729] R10: 00007fff6f892e20 R11: 0000000000000246 R12: 0000000000000000
[   71.598689] R13: 0000000000662ee0 R14: 0000000000000000 R15: 0000000000000000
[   71.606651] Modules linked in: sch_cbq cls_tcindex sch_dsmark xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_coni
[   71.685425]  libahci i2c_algo_bit i2c_core i40e libata dca mdio megaraid_sas dm_mirror dm_region_hash dm_log dm_mod
[   71.697075] CR2: 0000000000000004
[   71.700792] ---[ end trace f604eb1acacd978b ]---

Reproducer:
tc qdisc add dev lo handle 1:0 root dsmark indices 64 set_tc_index
tc filter add dev lo parent 1:0 protocol ip prio 1 tcindex mask 0xfc shift 2
tc qdisc add dev lo parent 1:0 handle 2:0 cbq bandwidth 10Mbit cell 8 avpkt 1000 mpu 64
tc class add dev lo parent 2:0 classid 2:1 cbq bandwidth 10Mbit rate 1500Kbit avpkt 1000 prio 1 bounded isolated allot 1514 weight 1 maxburst 10
tc filter add dev lo parent 2:0 protocol ip prio 1 handle 0x2e tcindex classid 2:1 pass_on
tc qdisc add dev lo parent 2:1 pfifo limit 5
tc qdisc del dev lo root

This is because in tcindex_set_parms, when there is no old_r, we set new
exts to cr.exts. And we didn't set it to filter when r == &new_filter_result.

Then in tcindex_delete() -> tcf_exts_get_net(), we will get NULL pointer
dereference as we didn't init exts.

Fix it by moving tcf_exts_change() after "if (old_r && old_r != r)" check.
Then we don't need "cr" as there is no errout after that.

Fixes: bf63ac73b3e13 ("net_sched: fix an oops in tcindex filter")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/cls_tcindex.c |    7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

--- a/net/sched/cls_tcindex.c
+++ b/net/sched/cls_tcindex.c
@@ -447,11 +447,6 @@ tcindex_set_parms(struct net *net, struc
 		tcf_bind_filter(tp, &cr.res, base);
 	}
 
-	if (old_r)
-		tcf_exts_change(&r->exts, &e);
-	else
-		tcf_exts_change(&cr.exts, &e);
-
 	if (old_r && old_r != r) {
 		err = tcindex_filter_result_init(old_r);
 		if (err < 0) {
@@ -462,6 +457,8 @@ tcindex_set_parms(struct net *net, struc
 
 	oldp = p;
 	r->res = cr.res;
+	tcf_exts_change(&r->exts, &e);
+
 	rcu_assign_pointer(tp->root, cp);
 
 	if (r == &new_filter_result) {

[PATCH 4.18 03/35] net_sched: Fix missing res info when create new tc_index filter

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit 008369dcc5f7bfba526c98054f8525322acf0ea3 ]

Li Shuang reported the following warn:

[  733.484610] WARNING: CPU: 6 PID: 21123 at net/sched/sch_cbq.c:1418 cbq_destroy_class+0x5d/0x70 [sch_cbq]
[  733.495190] Modules linked in: sch_cbq cls_tcindex sch_dsmark rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat l
[  733.574155]  syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm igb ixgbe ahci libahci i2c_algo_bit libata i40e i2c_core dca mdio megaraid_sas dm_mirror dm_region_hash dm_log dm_mod
[  733.592500] CPU: 6 PID: 21123 Comm: tc Not tainted 4.18.0-rc8.latest+ #131
[  733.600169] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.1.5 04/11/2016
[  733.608518] RIP: 0010:cbq_destroy_class+0x5d/0x70 [sch_cbq]
[  733.614734] Code: e7 d9 d2 48 8b 7b 48 e8 61 05 da d2 48 8d bb f8 00 00 00 e8 75 ae d5 d2 48 39 eb 74 0a 48 89 df 5b 5d e9 16 6c 94 d2 5b 5d c3 <0f> 0b eb b6 0f 1f 44 00 00 66 2e 0f 1f 84
[  733.635798] RSP: 0018:ffffbfbb066bb9d8 EFLAGS: 00010202
[  733.641627] RAX: 0000000000000001 RBX: ffff9cdd17392800 RCX: 000000008010000f
[  733.649588] RDX: ffff9cdd1df547e0 RSI: ffff9cdd17392800 RDI: ffff9cdd0f84c800
[  733.657547] RBP: ffff9cdd0f84c800 R08: 0000000000000001 R09: 0000000000000000
[  733.665508] R10: ffff9cdd0f84d000 R11: 0000000000000001 R12: 0000000000000001
[  733.673469] R13: 0000000000000000 R14: 0000000000000001 R15: ffff9cdd17392200
[  733.681430] FS:  00007f911890a740(0000) GS:ffff9cdd1f8c0000(0000) knlGS:0000000000000000
[  733.690456] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  733.696864] CR2: 0000000000b5544c CR3: 0000000859374002 CR4: 00000000001606e0
[  733.704826] Call Trace:
[  733.707554]  cbq_destroy+0xa1/0xd0 [sch_cbq]
[  733.712318]  qdisc_destroy+0x62/0x130
[  733.716401]  dsmark_destroy+0x2a/0x70 [sch_dsmark]
[  733.721745]  qdisc_destroy+0x62/0x130
[  733.725829]  qdisc_graft+0x3ba/0x470
[  733.729817]  tc_get_qdisc+0x2a6/0x2c0
[  733.733901]  ? cred_has_capability+0x7d/0x130
[  733.738761]  rtnetlink_rcv_msg+0x263/0x2d0
[  733.743330]  ? rtnl_calcit.isra.30+0x110/0x110
[  733.748287]  netlink_rcv_skb+0x4d/0x130
[  733.752576]  netlink_unicast+0x1a3/0x250
[  733.756949]  netlink_sendmsg+0x2ae/0x3a0
[  733.761324]  sock_sendmsg+0x36/0x40
[  733.765213]  ___sys_sendmsg+0x26f/0x2d0
[  733.769493]  ? handle_pte_fault+0x586/0xdf0
[  733.774158]  ? __handle_mm_fault+0x389/0x500
[  733.778919]  ? __sys_sendmsg+0x5e/0xa0
[  733.783099]  __sys_sendmsg+0x5e/0xa0
[  733.787087]  do_syscall_64+0x5b/0x180
[  733.791171]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  733.796805] RIP: 0033:0x7f9117f23f10
[  733.800791] Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8
[  733.821873] RSP: 002b:00007ffe96818398 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[  733.830319] RAX: ffffffffffffffda RBX: 000000005b71244c RCX: 00007f9117f23f10
[  733.838280] RDX: 0000000000000000 RSI: 00007ffe968183e0 RDI: 0000000000000003
[  733.846241] RBP: 00007ffe968183e0 R08: 000000000000ffff R09: 0000000000000003
[  733.854202] R10: 00007ffe96817e20 R11: 0000000000000246 R12: 0000000000000000
[  733.862161] R13: 0000000000662ee0 R14: 0000000000000000 R15: 0000000000000000
[  733.870121] ---[ end trace 28edd4aad712ddca ]---

This is because we didn't update f->result.res when create new filter. Then in
tcindex_delete() -> tcf_unbind_filter(), we will failed to find out the res
and unbind filter, which will trigger the WARN_ON() in cbq_destroy_class().

Fix it by updating f->result.res when create new filter.

Fixes: 6e0565697a106 ("net_sched: fix another crash in cls_tcindex")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/cls_tcindex.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/sched/cls_tcindex.c
+++ b/net/sched/cls_tcindex.c
@@ -465,6 +465,7 @@ tcindex_set_parms(struct net *net, struc
 		struct tcindex_filter *nfp;
 		struct tcindex_filter __rcu **fp;
 
+		f->result.res = r->res;
 		tcf_exts_change(&f->result.exts, &r->exts);
 
 		fp = cp->h + (handle % cp->hash);

[PATCH 4.18 04/35] r8169: dont use MSI-X on RTL8168g

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit 7c53a722459c1d6ffb0f5b2058c06ca8980b8600 ]

There have been two reports that network doesn't come back on resume
from suspend when using MSI-X. Both cases affect the same chip version
(RTL8168g - version 40), on different systems. Falling back to MSI
fixes the issue.
Even though we don't really have a proof yet that the network chip
version is to blame, let's disable MSI-X for this version.

Reported-by: Steve Dodd <steved424@gmail.com>
Reported-by: Lou Reed <gogen@disroot.org>
Tested-by: Steve Dodd <steved424@gmail.com>
Tested-by: Lou Reed <gogen@disroot.org>
Fixes: 6c6aa15fdea5 ("r8169: improve interrupt handling")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/realtek/r8169.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -7544,6 +7544,11 @@ static int rtl_alloc_irq(struct rtl8169_
 		RTL_W8(tp, Config2, RTL_R8(tp, Config2) & ~MSIEnable);
 		RTL_W8(tp, Cfg9346, Cfg9346_Lock);
 		flags = PCI_IRQ_LEGACY;
+	} else if (tp->mac_version == RTL_GIGA_MAC_VER_40) {
+		/* This version was reported to have issues with resume
+		 * from suspend when using MSI-X
+		 */
+		flags = PCI_IRQ_LEGACY | PCI_IRQ_MSI;
 	} else {
 		flags = PCI_IRQ_ALL_TYPES;
 	}

[PATCH 4.18 05/35] ALSA: hda - Sleep for 10ms after entering D3 on Conexant codecs

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Park Ju Hyung <qkrwngud825@gmail.com>

commit f59cf9a0551dd954ad8b752461cf19d9789f4b1d upstream.

On rare occasions, we are still noticing that the internal speaker
spitting out spurious noises even after adding the problematic codec
to the list.

Adding a 10ms artificial delay before rebooting fixes the issue entirely.

Patch for Realtek codecs also adds the same amount of delay after
entering D3.

Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_conexant.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -225,6 +225,7 @@ static void cx_auto_reboot_notify(struct
 	snd_hda_codec_set_power_to_all(codec, codec->core.afg, AC_PWRST_D3);
 	snd_hda_codec_write(codec, codec->core.afg, 0,
 			    AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
+	msleep(10);
 }
 
 static void cx_auto_free(struct hda_codec *codec)

[PATCH 4.18 06/35] ALSA: hda - Turn CX8200 into D3 as well upon reboot

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Park Ju Hyung <qkrwngud825@gmail.com>

commit d77a4b4a5b0b2ebcbc9840995d91311ef28302ab upstream.

As an equivalent codec with CX20724,
CX8200 is also subject to the reboot bug.

Late 2017 and 2018 LG Gram and some HP Spectre laptops are known victims
to this issue, causing extremely loud noises upon reboot.

Now that we know that this bug is subject to multiple codecs,
fix the comment as well.

Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_conexant.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -211,6 +211,7 @@ static void cx_auto_reboot_notify(struct
 	struct conexant_spec *spec = codec->spec;
 
 	switch (codec->core.vendor_id) {
+	case 0x14f12008: /* CX8200 */
 	case 0x14f150f2: /* CX20722 */
 	case 0x14f150f4: /* CX20724 */
 		break;
@@ -218,7 +219,7 @@ static void cx_auto_reboot_notify(struct
 		return;
 	}
 
-	/* Turn the CX20722 codec into D3 to avoid spurious noises
+	/* Turn the problematic codec into D3 to avoid spurious noises
 	   from the internal speaker during (and after) reboot */
 	cx_auto_turn_eapd(codec, spec->num_eapds, spec->eapds, false);
 

[PATCH 4.18 07/35] ALSA: vx222: Fix invalid endian conversions

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit fff71a4c050ba46e305d910c837b99ba1728135e upstream.

The endian conversions used in vx2_dma_read() and vx2_dma_write() are
superfluous and even wrong on big-endian machines, as inl() and outl()
already do conversions.  Kill them.

Spotted by sparse, a warning like:
  sound/pci/vx222/vx222_ops.c:278:30: warning: incorrect type in argument 1 (different base types)

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/vx222/vx222_ops.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/sound/pci/vx222/vx222_ops.c
+++ b/sound/pci/vx222/vx222_ops.c
@@ -275,7 +275,7 @@ static void vx2_dma_write(struct vx_core
 		length >>= 2; /* in 32bit words */
 		/* Transfer using pseudo-dma. */
 		for (; length > 0; length--) {
-			outl(cpu_to_le32(*addr), port);
+			outl(*addr, port);
 			addr++;
 		}
 		addr = (u32 *)runtime->dma_area;
@@ -285,7 +285,7 @@ static void vx2_dma_write(struct vx_core
 	count >>= 2; /* in 32bit words */
 	/* Transfer using pseudo-dma. */
 	for (; count > 0; count--) {
-		outl(cpu_to_le32(*addr), port);
+		outl(*addr, port);
 		addr++;
 	}
 
@@ -313,7 +313,7 @@ static void vx2_dma_read(struct vx_core
 		length >>= 2; /* in 32bit words */
 		/* Transfer using pseudo-dma. */
 		for (; length > 0; length--)
-			*addr++ = le32_to_cpu(inl(port));
+			*addr++ = inl(port);
 		addr = (u32 *)runtime->dma_area;
 		pipe->hw_ptr = 0;
 	}
@@ -321,7 +321,7 @@ static void vx2_dma_read(struct vx_core
 	count >>= 2; /* in 32bit words */
 	/* Transfer using pseudo-dma. */
 	for (; count > 0; count--)
-		*addr++ = le32_to_cpu(inl(port));
+		*addr++ = inl(port);
 
 	vx2_release_pseudo_dma(chip);
 }

[PATCH 4.18 08/35] ALSA: virmidi: Fix too long output trigger loop

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 50e9ffb1996a5d11ff5040a266585bad4ceeca0a upstream.

The virmidi output trigger tries to parse the all available bytes and
process sequencer events as much as possible.  In a normal situation,
this is supposed to be relatively short, but a program may give a huge
buffer and it'll take a long time in a single spin lock, which may
eventually lead to a soft lockup.

This patch simply adds a workaround, a cond_resched() call in the loop
if applicable.  A better solution would be to move the event processor
into a work, but let's put a duct-tape quickly at first.

Reported-and-tested-by: Dae R. Jeong <threeearcat@gmail.com>
Reported-by: syzbot+619d9f40141d826b097e@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/seq/seq_virmidi.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

--- a/sound/core/seq/seq_virmidi.c
+++ b/sound/core/seq/seq_virmidi.c
@@ -163,6 +163,7 @@ static void snd_virmidi_output_trigger(s
 	int count, res;
 	unsigned char buf[32], *pbuf;
 	unsigned long flags;
+	bool check_resched = !in_atomic();
 
 	if (up) {
 		vmidi->trigger = 1;
@@ -200,6 +201,15 @@ static void snd_virmidi_output_trigger(s
 					vmidi->event.type = SNDRV_SEQ_EVENT_NONE;
 				}
 			}
+			if (!check_resched)
+				continue;
+			/* do temporary unlock & cond_resched() for avoiding
+			 * CPU soft lockup, which may happen via a write from
+			 * a huge rawmidi buffer
+			 */
+			spin_unlock_irqrestore(&substream->runtime->lock, flags);
+			cond_resched();
+			spin_lock_irqsave(&substream->runtime->lock, flags);
 		}
 	out:
 		spin_unlock_irqrestore(&substream->runtime->lock, flags);

[PATCH 4.18 09/35] ALSA: cs5535audio: Fix invalid endian conversion

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 69756930f2de0457d51db7d505a1e4f40e9fd116 upstream.

One place in cs5535audio_build_dma_packets() does an extra conversion
via cpu_to_le32(); namely jmpprd_addr is passed to setup_prd() ops,
which writes the value via cs_writel().  That is, the callback does
the conversion by itself, and we don't need to convert beforehand.

This patch fixes that bogus conversion.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/cs5535audio/cs5535audio.h     |    6 +++---
 sound/pci/cs5535audio/cs5535audio_pcm.c |    4 ++--
 2 files changed, 5 insertions(+), 5 deletions(-)

--- a/sound/pci/cs5535audio/cs5535audio.h
+++ b/sound/pci/cs5535audio/cs5535audio.h
@@ -67,9 +67,9 @@ struct cs5535audio_dma_ops {
 };
 
 struct cs5535audio_dma_desc {
-	u32 addr;
-	u16 size;
-	u16 ctlreserved;
+	__le32 addr;
+	__le16 size;
+	__le16 ctlreserved;
 };
 
 struct cs5535audio_dma {
--- a/sound/pci/cs5535audio/cs5535audio_pcm.c
+++ b/sound/pci/cs5535audio/cs5535audio_pcm.c
@@ -158,8 +158,8 @@ static int cs5535audio_build_dma_packets
 	lastdesc->addr = cpu_to_le32((u32) dma->desc_buf.addr);
 	lastdesc->size = 0;
 	lastdesc->ctlreserved = cpu_to_le16(PRD_JMP);
-	jmpprd_addr = cpu_to_le32(lastdesc->addr +
-				  (sizeof(struct cs5535audio_dma_desc)*periods));
+	jmpprd_addr = (u32)dma->desc_buf.addr +
+		sizeof(struct cs5535audio_dma_desc) * periods;
 
 	dma->substream = substream;
 	dma->period_bytes = period_bytes;

[PATCH 4.18 10/35] ALSA: dice: fix wrong copy to rx parameters for Alesis iO26

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

commit 627661ced8246c8e833f3bc3817070e934cd79ba upstream.

A commit 28b208f600a3 ('ALSA: dice: add parameters of stream formats for
models produced by Alesis') adds wrong copy to rx parameters instead of
tx parameters for Alesis iO26.

This commit fixes the bug for v4.18-rc8.

Fixes: 28b208f600a3 ('ALSA: dice: add parameters of stream formats for models produced by Alesis')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org> # v4.18
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/firewire/dice/dice-alesis.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/firewire/dice/dice-alesis.c
+++ b/sound/firewire/dice/dice-alesis.c
@@ -37,7 +37,7 @@ int snd_dice_detect_alesis_formats(struc
 				MAX_STREAMS * SND_DICE_RATE_MODE_COUNT *
 				sizeof(unsigned int));
 	} else {
-		memcpy(dice->rx_pcm_chs, alesis_io26_tx_pcm_chs,
+		memcpy(dice->tx_pcm_chs, alesis_io26_tx_pcm_chs,
 				MAX_STREAMS * SND_DICE_RATE_MODE_COUNT *
 				sizeof(unsigned int));
 	}

[PATCH 4.18 11/35] ALSA: hda: Correct Asrock B85M-ITX power_save blacklist entry

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit 8e82a728792bf66b9f0a29c9d4c4b0630f7b9c79 upstream.

I added the subsys product-id for the HDMI HDA device rather then for
the PCH one, this commit fixes this.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/hda_intel.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2207,7 +2207,7 @@ out_free:
  */
 static struct snd_pci_quirk power_save_blacklist[] = {
 	/* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */
-	SND_PCI_QUIRK(0x1849, 0x0c0c, "Asrock B85M-ITX", 0),
+	SND_PCI_QUIRK(0x1849, 0xc892, "Asrock B85M-ITX", 0),
 	/* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */
 	SND_PCI_QUIRK(0x1849, 0x7662, "Asrock H81M-HDS", 0),
 	/* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */

[PATCH 4.18 12/35] ALSA: memalloc: Dont exceed over the requested size

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit dfef01e150824b0e6da750cacda8958188d29aea upstream.

snd_dma_alloc_pages_fallback() tries to allocate pages again when the
allocation fails with reduced size.  But the first try actually
*increases* the size to power-of-two, which may give back a larger
chunk than the requested size.  This confuses the callers, e.g. sgbuf
assumes that the size is equal or less, and it may result in a bad
loop due to the underflow and eventually lead to Oops.

The code of this function seems incorrectly assuming the usage of
get_order().  We need to decrease at first, then align to
power-of-two.

Reported-and-tested-by: he, bo <bo.he@intel.com>
Reported-by: zhang jun <jun.zhang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/memalloc.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

--- a/sound/core/memalloc.c
+++ b/sound/core/memalloc.c
@@ -242,16 +242,12 @@ int snd_dma_alloc_pages_fallback(int typ
 	int err;
 
 	while ((err = snd_dma_alloc_pages(type, device, size, dmab)) < 0) {
-		size_t aligned_size;
 		if (err != -ENOMEM)
 			return err;
 		if (size <= PAGE_SIZE)
 			return -ENOMEM;
-		aligned_size = PAGE_SIZE << get_order(size);
-		if (size != aligned_size)
-			size = aligned_size;
-		else
-			size >>= 1;
+		size >>= 1;
+		size = PAGE_SIZE << get_order(size);
 	}
 	if (! dmab->area)
 		return -ENOMEM;

[PATCH 4.18 13/35] ALSA: vxpocket: Fix invalid endian conversions

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 3acd3e3bab95ec3622ff98da313290ee823a0f68 upstream.

The endian conversions used in vxp_dma_read() and vxp_dma_write() are
superfluous and even wrong on big-endian machines, as inw() and outw()
already do conversions.  Kill them.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pcmcia/vx/vxp_ops.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/sound/pcmcia/vx/vxp_ops.c
+++ b/sound/pcmcia/vx/vxp_ops.c
@@ -375,7 +375,7 @@ static void vxp_dma_write(struct vx_core
 		length >>= 1; /* in 16bit words */
 		/* Transfer using pseudo-dma. */
 		for (; length > 0; length--) {
-			outw(cpu_to_le16(*addr), port);
+			outw(*addr, port);
 			addr++;
 		}
 		addr = (unsigned short *)runtime->dma_area;
@@ -385,7 +385,7 @@ static void vxp_dma_write(struct vx_core
 	count >>= 1; /* in 16bit words */
 	/* Transfer using pseudo-dma. */
 	for (; count > 0; count--) {
-		outw(cpu_to_le16(*addr), port);
+		outw(*addr, port);
 		addr++;
 	}
 	vx_release_pseudo_dma(chip);
@@ -417,7 +417,7 @@ static void vxp_dma_read(struct vx_core
 		length >>= 1; /* in 16bit words */
 		/* Transfer using pseudo-dma. */
 		for (; length > 0; length--)
-			*addr++ = le16_to_cpu(inw(port));
+			*addr++ = inw(port);
 		addr = (unsigned short *)runtime->dma_area;
 		pipe->hw_ptr = 0;
 	}
@@ -425,12 +425,12 @@ static void vxp_dma_read(struct vx_core
 	count >>= 1; /* in 16bit words */
 	/* Transfer using pseudo-dma. */
 	for (; count > 1; count--)
-		*addr++ = le16_to_cpu(inw(port));
+		*addr++ = inw(port);
 	/* Disable DMA */
 	pchip->regDIALOG &= ~VXP_DLG_DMAREAD_SEL_MASK;
 	vx_outb(chip, DIALOG, pchip->regDIALOG);
 	/* Read the last word (16 bits) */
-	*addr = le16_to_cpu(inw(port));
+	*addr = inw(port);
 	/* Disable 16-bit accesses */
 	pchip->regDIALOG &= ~VXP_DLG_DMA16_SEL_MASK;
 	vx_outb(chip, DIALOG, pchip->regDIALOG);

[PATCH 4.18 14/35] ALSA: seq: Fix poll() error return

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit a49a71f6e25da2acc637fcd31e73debd96ca18f8 upstream.

The sanity checks in ALSA sequencer and OSS sequencer emulation codes
return falsely -ENXIO from poll callback.  They should be EPOLLERR
instead.

This was caught thanks to the recent change to the return value.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/seq/oss/seq_oss.c   |    2 +-
 sound/core/seq/seq_clientmgr.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/sound/core/seq/oss/seq_oss.c
+++ b/sound/core/seq/oss/seq_oss.c
@@ -203,7 +203,7 @@ odev_poll(struct file *file, poll_table
 	struct seq_oss_devinfo *dp;
 	dp = file->private_data;
 	if (snd_BUG_ON(!dp))
-		return -ENXIO;
+		return EPOLLERR;
 	return snd_seq_oss_poll(dp, file, wait);
 }
 
--- a/sound/core/seq/seq_clientmgr.c
+++ b/sound/core/seq/seq_clientmgr.c
@@ -1101,7 +1101,7 @@ static __poll_t snd_seq_poll(struct file
 
 	/* check client structures are in place */
 	if (snd_BUG_ON(!client))
-		return -ENXIO;
+		return EPOLLERR;
 
 	if ((snd_seq_file_flags(file) & SNDRV_SEQ_LFLG_INPUT) &&
 	    client->data.user.fifo) {

[PATCH 4.18 16/35] USB: serial: sierra: fix potential deadlock at close

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Ogness <john.ogness@linutronix.de>

commit e60870012e5a35b1506d7b376fddfb30e9da0b27 upstream.

The portdata spinlock can be taken in interrupt context (via
sierra_outdat_callback()).
Disable interrupts when taking the portdata spinlock when discarding
deferred URBs during close to prevent a possible deadlock.

Fixes: 014333f77c0b ("USB: sierra: fix urb and memory leak on disconnect")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ johan: amend commit message and add fixes and stable tags ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/sierra.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -770,9 +770,9 @@ static void sierra_close(struct usb_seri
 		kfree(urb->transfer_buffer);
 		usb_free_urb(urb);
 		usb_autopm_put_interface_async(serial->interface);
-		spin_lock(&portdata->lock);
+		spin_lock_irq(&portdata->lock);
 		portdata->outstanding_urbs--;
-		spin_unlock(&portdata->lock);
+		spin_unlock_irq(&portdata->lock);
 	}
 
 	sierra_stop_rx_urbs(port);

[PATCH 4.18 17/35] USB: serial: pl2303: add a new device id for ATEN

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Movie Song <MovieSong@aten-itlab.cn>

commit 29c692c96b3a39cd1911fb79cd2505af8d070f07 upstream.

Signed-off-by: Movie Song <MovieSong@aten-itlab.cn>
Cc: Johan Hovold <johan@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/pl2303.c |    2 ++
 drivers/usb/serial/pl2303.h |    1 +
 2 files changed, 3 insertions(+)

--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -52,6 +52,8 @@ static const struct usb_device_id id_tab
 		.driver_info = PL2303_QUIRK_ENDPOINT_HACK },
 	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_UC485),
 		.driver_info = PL2303_QUIRK_ENDPOINT_HACK },
+	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_UC232B),
+		.driver_info = PL2303_QUIRK_ENDPOINT_HACK },
 	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID2) },
 	{ USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
 	{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -24,6 +24,7 @@
 #define ATEN_VENDOR_ID2		0x0547
 #define ATEN_PRODUCT_ID		0x2008
 #define ATEN_PRODUCT_UC485	0x2021
+#define ATEN_PRODUCT_UC232B	0x2022
 #define ATEN_PRODUCT_ID2	0x2118
 
 #define IODATA_VENDOR_ID	0x04bb

[PATCH 4.18 18/35] USB: option: add support for DW5821e

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aleksander Morgado <aleksander@aleksander.es>

commit 7bab01ecc6c43da882333c6db39741cb43677004 upstream.

The device exposes AT, NMEA and DIAG ports in both USB configurations.

The patch explicitly ignores interfaces 0 and 1, as they're bound to
other drivers already; and also interface 6, which is a GNSS interface
for which we don't have a driver yet.

T:  Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 18 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  2
P:  Vendor=413c ProdID=81d7 Rev=03.18
S:  Manufacturer=DELL
S:  Product=DW5821e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

T:  Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  2
P:  Vendor=413c ProdID=81d7 Rev=03.18
S:  Manufacturer=DELL
S:  Product=DW5821e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -196,6 +196,8 @@ static void option_instat_callback(struc
 #define DELL_PRODUCT_5800_V2_MINICARD_VZW	0x8196  /* Novatel E362 */
 #define DELL_PRODUCT_5804_MINICARD_ATT		0x819b  /* Novatel E371 */
 
+#define DELL_PRODUCT_5821E			0x81d7
+
 #define KYOCERA_VENDOR_ID			0x0c88
 #define KYOCERA_PRODUCT_KPC650			0x17da
 #define KYOCERA_PRODUCT_KPC680			0x180a
@@ -1030,6 +1032,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_MINICARD_VZW, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5800_V2_MINICARD_VZW, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(DELL_VENDOR_ID, DELL_PRODUCT_5804_MINICARD_ATT, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5821E),
+	  .driver_info = RSVD(0) | RSVD(1) | RSVD(6) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },	/* ADU-E100, ADU-310 */
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },

[PATCH 4.18 19/35] ACPI / PM: save NVS memory for ASUS 1025C laptop

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Willy Tarreau <w@1wt.eu>

commit 231f9415001138a000cd0f881c46654b7ea3f8c5 upstream.

Every time I tried to upgrade my laptop from 3.10.x to 4.x I faced an
issue by which the fan would run at full speed upon resume. Bisecting
it showed me the issue was introduced in 3.17 by commit 821d6f0359b0
(ACPI / sleep: Do not save NVS for new machines to accelerate S3). This
code only affects machines built starting as of 2012, but this Asus
1025C laptop was made in 2012 and apparently needs the NVS data to be
saved, otherwise the CPU's thermal state is not properly reported on
resume and the fan runs at full speed upon resume.

Here's a very simple way to check if such a machine is affected :

  # cat /sys/class/thermal/thermal_zone0/temp
  55000

  ( now suspend, wait one second and resume )

  # cat /sys/class/thermal/thermal_zone0/temp
  0

  (and after ~15 seconds the fan starts to spin)

Let's apply the same quirk as commit cbc00c13 (ACPI: save NVS memory
for Lenovo G50-45) and reuse the function it provides. Note that this
commit was already backported to 4.9.x but not 4.4.x.

Cc: 3.17+ <stable@vger.kernel.org> # 3.17+: requires cbc00c13
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/sleep.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -338,6 +338,14 @@ static const struct dmi_system_id acpisl
 		DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
 		},
 	},
+	{
+	.callback = init_nvs_save_s3,
+	.ident = "Asus 1025C",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "1025C"),
+		},
+	},
 	/*
 	 * https://bugzilla.kernel.org/show_bug.cgi?id=189431
 	 * Lenovo G50-45 is a platform later than 2012, but needs nvs memory

[PATCH 4.18 20/35] tty: serial: 8250: Revert NXP SC16C2552 workaround

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark <dmarkh@cfl.rr.com>

commit 47ac76662ca9c5852fd353093f19de3ae85f2e66 upstream.

Revert commit ecb988a3b7985913d1f0112f66667cdd15e40711: tty: serial:
8250: 8250_core: NXP SC16C2552 workaround

The above commit causes userland application to no longer write
correctly its first write to a dumb terminal connected to /dev/ttyS0.
This commit seems to be the culprit. It's as though the TX FIFO is being
reset during that write. What should be displayed is:

PSW 80000000 INST 00000000                           HALT
//

What is displayed is some variation of:

T 00000000           HAL//

Reverting this commit via this patch fixes my problem.

Signed-off-by: Mark Hounschell <dmarkh@cfl.rr.com>
Fixes: ecb988a3b798 ("tty: serial: 8250: 8250_core: NXP SC16C2552 workaround")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_port.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -90,8 +90,7 @@ static const struct serial8250_config ua
 		.name		= "16550A",
 		.fifo_size	= 16,
 		.tx_loadsz	= 16,
-		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
-				  UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
+		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
 		.rxtrig_bytes	= {1, 4, 8, 14},
 		.flags		= UART_CAP_FIFO,
 	},

[PATCH 4.18 21/35] serial: 8250_exar: Read INT0 from slave device, too

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Aaron Sierra <asierra@xes-inc.com>

commit 60ab0fafc4b652fcaf7cbc3bb8555a0cf1149c28 upstream.

The sleep wake-up refactoring that I introduced in

  commit c7e1b4059075 ("tty: serial: exar: Relocate sleep wake-up handling")

did not account for devices with a slave device on the expansion port.
This patch pokes the INT0 register in the slave device, if present, in
order to ensure that MSI interrupts don't get permanently "stuck"
because of a sleep wake-up interrupt as described here:

  commit 2c0ac5b48a35 ("serial: exar: Fix stuck MSIs")

This also converts an ioread8() to readb() in order to provide visual
consistency with the MMIO-only accessors used elsewhere in the driver.

Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Fixes: c7e1b4059075 ("tty: serial: exar: Relocate sleep wake-up handling")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_exar.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -433,7 +433,11 @@ static irqreturn_t exar_misc_handler(int
 	struct exar8250 *priv = data;
 
 	/* Clear all PCI interrupts by reading INT0. No effect on IIR */
-	ioread8(priv->virt + UART_EXAR_INT0);
+	readb(priv->virt + UART_EXAR_INT0);
+
+	/* Clear INT0 for Expansion Interface slave ports, too */
+	if (priv->board->num_ports > 8)
+		readb(priv->virt + 0x2000 + UART_EXAR_INT0);
 
 	return IRQ_HANDLED;
 }

[PATCH 4.18 22/35] serial: 8250_dw: always set baud rate in dw8250_set_termios

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chen Hu <hu1.chen@intel.com>

commit dfcab6ba573445c703235ab6c83758eec12d7f28 upstream.

dw8250_set_termios() doesn't set baud rate if the arg "old ktermios" is
NULL. This happens during resume.
Call Trace:
...
[   54.928108] dw8250_set_termios+0x162/0x170
[   54.928114] serial8250_set_termios+0x17/0x20
[   54.928117] uart_change_speed+0x64/0x160
[   54.928119] uart_resume_port
...

So the baud rate is not restored after S3 and breaks the apps who use
UART, for example, console and bluetooth etc.

We address this issue by setting the baud rate irrespective of arg
"old", just like the drivers for other 8250 IPs. This is tested with
Intel Broxton platform.

Signed-off-by: Chen Hu <hu1.chen@intel.com>
Fixes: 4e26b134bd17 ("serial: 8250_dw: clock rate handling for all ACPI platforms")
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_dw.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -293,7 +293,7 @@ static void dw8250_set_termios(struct ua
 	long rate;
 	int ret;
 
-	if (IS_ERR(d->clk) || !old)
+	if (IS_ERR(d->clk))
 		goto out;
 
 	clk_disable_unprepare(d->clk);

[PATCH 4.18 23/35] serial: 8250_dw: Add ACPI support for uart on Broadcom SoC

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Srinath Mannam <srinath.mannam@broadcom.com>

commit 784c29eda5b4e28c3a56aa90b3815f9a1b0cfdc1 upstream.

Add ACPI identifier HID for UART DW 8250 on Broadcom SoCs
to match the HID passed through ACPI tables to enable
UART controller.

Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Tested-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_dw.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -707,6 +707,7 @@ static const struct acpi_device_id dw825
 	{ "APMC0D08", 0},
 	{ "AMD0020", 0 },
 	{ "AMDI0020", 0 },
+	{ "BRCM2032", 0 },
 	{ "HISI0031", 0 },
 	{ },
 };

[PATCH 4.18 24/35] uio: fix wrong return value from uio_mmap()

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hailong Liu <liu.hailong6@zte.com.cn>

commit e7de2590f18a272e63732b9d519250d1b522b2c4 upstream.

uio_mmap has multiple fail paths to set return value to nonzero then
goto out. However, it always returns *0* from the *out* at end, and
this will mislead callers who check the return value of this function.

Fixes: 57c5f4df0a5a0ee ("uio: fix crash after the device is unregistered")
CC: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Hailong Liu <liu.hailong6@zte.com.cn>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/uio/uio.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -814,7 +814,7 @@ static int uio_mmap(struct file *filep,
 
 out:
 	mutex_unlock(&idev->info_lock);
-	return 0;
+	return ret;
 }
 
 static const struct file_operations uio_fops = {

[PATCH 4.18 25/35] misc: sram: fix resource leaks in probe error path

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit f294d00961d1d869ecffa60e280eeeee1ccf9a49 upstream.

Make sure to disable clocks and deregister any exported partitions
before returning on late probe errors.

Note that since commit ee895ccdf776 ("misc: sram: fix enabled clock leak
on error path"), partitions are deliberately exported before enabling
the clock so we stick to that logic here. A follow up patch will address
this.

Cc: stable <stable@vger.kernel.org>     # 4.9
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/misc/sram.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/misc/sram.c
+++ b/drivers/misc/sram.c
@@ -407,13 +407,20 @@ static int sram_probe(struct platform_de
 	if (init_func) {
 		ret = init_func();
 		if (ret)
-			return ret;
+			goto err_disable_clk;
 	}
 
 	dev_dbg(sram->dev, "SRAM pool: %zu KiB @ 0x%p\n",
 		gen_pool_size(sram->pool) / 1024, sram->virt_base);
 
 	return 0;
+
+err_disable_clk:
+	if (sram->clk)
+		clk_disable_unprepare(sram->clk);
+	sram_free_partitions(sram);
+
+	return ret;
 }
 
 static int sram_remove(struct platform_device *pdev)

[PATCH 4.18 26/35] Revert "uio: use request_threaded_irq instead"

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xiubo Li <xiubli@redhat.com>

commit 3d27c4de8d4fb2d4099ff324671792aa2578c6f9 upstream.

Since mutex lock in irq hanler is useless currently, here will
remove it together with it.

This reverts commit 9421e45f5ff3d558cf8b75a8cc0824530caf3453.

Reported-by: james.r.harris@intel.com
CC: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/uio/uio.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -443,13 +443,10 @@ static irqreturn_t uio_interrupt(int irq
 	struct uio_device *idev = (struct uio_device *)dev_id;
 	irqreturn_t ret;
 
-	mutex_lock(&idev->info_lock);
-
 	ret = idev->info->handler(irq, idev->info);
 	if (ret == IRQ_HANDLED)
 		uio_event_notify(idev->info);
 
-	mutex_unlock(&idev->info_lock);
 	return ret;
 }
 
@@ -969,9 +966,8 @@ int __uio_register_device(struct module
 		 * FDs at the time of unregister and therefore may not be
 		 * freed until they are released.
 		 */
-		ret = request_threaded_irq(info->irq, NULL, uio_interrupt,
-					   info->irq_flags, info->name, idev);
-
+		ret = request_irq(info->irq, uio_interrupt,
+				  info->irq_flags, info->name, idev);
 		if (ret)
 			goto err_request_irq;
 	}

[PATCH 4.18 27/35] Bluetooth: avoid killing an already killed socket

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sudip Mukherjee <sudipm.mukherjee@gmail.com>

commit 4e1a720d0312fd510699032c7694a362a010170f upstream.

slub debug reported:

[  440.648642] =============================================================================
[  440.648649] BUG kmalloc-1024 (Tainted: G    BU     O   ): Poison overwritten
[  440.648651] -----------------------------------------------------------------------------

[  440.648655] INFO: 0xe70f4bec-0xe70f4bec. First byte 0x6a instead of 0x6b
[  440.648665] INFO: Allocated in sk_prot_alloc+0x6b/0xc6 age=33155 cpu=1 pid=1047
[  440.648671] 	___slab_alloc.constprop.24+0x1fc/0x292
[  440.648675] 	__slab_alloc.isra.18.constprop.23+0x1c/0x25
[  440.648677] 	__kmalloc+0xb6/0x17f
[  440.648680] 	sk_prot_alloc+0x6b/0xc6
[  440.648683] 	sk_alloc+0x1e/0xa1
[  440.648700] 	sco_sock_alloc.constprop.6+0x26/0xaf [bluetooth]
[  440.648716] 	sco_connect_cfm+0x166/0x281 [bluetooth]
[  440.648731] 	hci_conn_request_evt.isra.53+0x258/0x281 [bluetooth]
[  440.648746] 	hci_event_packet+0x28b/0x2326 [bluetooth]
[  440.648759] 	hci_rx_work+0x161/0x291 [bluetooth]
[  440.648764] 	process_one_work+0x163/0x2b2
[  440.648767] 	worker_thread+0x1a9/0x25c
[  440.648770] 	kthread+0xf8/0xfd
[  440.648774] 	ret_from_fork+0x2e/0x38
[  440.648779] INFO: Freed in __sk_destruct+0xd3/0xdf age=3815 cpu=1 pid=1047
[  440.648782] 	__slab_free+0x4b/0x27a
[  440.648784] 	kfree+0x12e/0x155
[  440.648787] 	__sk_destruct+0xd3/0xdf
[  440.648790] 	sk_destruct+0x27/0x29
[  440.648793] 	__sk_free+0x75/0x91
[  440.648795] 	sk_free+0x1c/0x1e
[  440.648810] 	sco_sock_kill+0x5a/0x5f [bluetooth]
[  440.648825] 	sco_conn_del+0x8e/0xba [bluetooth]
[  440.648840] 	sco_disconn_cfm+0x3a/0x41 [bluetooth]
[  440.648855] 	hci_event_packet+0x45e/0x2326 [bluetooth]
[  440.648868] 	hci_rx_work+0x161/0x291 [bluetooth]
[  440.648872] 	process_one_work+0x163/0x2b2
[  440.648875] 	worker_thread+0x1a9/0x25c
[  440.648877] 	kthread+0xf8/0xfd
[  440.648880] 	ret_from_fork+0x2e/0x38
[  440.648884] INFO: Slab 0xf4718580 objects=27 used=27 fp=0x  (null) flags=0x40008100
[  440.648886] INFO: Object 0xe70f4b88 @offset=19336 fp=0xe70f54f8

When KASAN was enabled, it reported:

[  210.096613] ==================================================================
[  210.096634] BUG: KASAN: use-after-free in ex_handler_refcount+0x5b/0x127
[  210.096641] Write of size 4 at addr ffff880107e17160 by task kworker/u9:1/2040

[  210.096651] CPU: 1 PID: 2040 Comm: kworker/u9:1 Tainted: G     U     O    4.14.47-20180606+ #2
[  210.096654] Hardware name: , BIOS 2017.01-00087-g43e04de 08/30/2017
[  210.096693] Workqueue: hci0 hci_rx_work [bluetooth]
[  210.096698] Call Trace:
[  210.096711]  dump_stack+0x46/0x59
[  210.096722]  print_address_description+0x6b/0x23b
[  210.096729]  ? ex_handler_refcount+0x5b/0x127
[  210.096736]  kasan_report+0x220/0x246
[  210.096744]  ex_handler_refcount+0x5b/0x127
[  210.096751]  ? ex_handler_clear_fs+0x85/0x85
[  210.096757]  fixup_exception+0x8c/0x96
[  210.096766]  do_trap+0x66/0x2c1
[  210.096773]  do_error_trap+0x152/0x180
[  210.096781]  ? fixup_bug+0x78/0x78
[  210.096817]  ? hci_debugfs_create_conn+0x244/0x26a [bluetooth]
[  210.096824]  ? __schedule+0x113b/0x1453
[  210.096830]  ? sysctl_net_exit+0xe/0xe
[  210.096837]  ? __wake_up_common+0x343/0x343
[  210.096843]  ? insert_work+0x107/0x163
[  210.096850]  invalid_op+0x1b/0x40
[  210.096888] RIP: 0010:hci_debugfs_create_conn+0x244/0x26a [bluetooth]
[  210.096892] RSP: 0018:ffff880094a0f970 EFLAGS: 00010296
[  210.096898] RAX: 0000000000000000 RBX: ffff880107e170e8 RCX: ffff880107e17160
[  210.096902] RDX: 000000000000002f RSI: ffff88013b80ed40 RDI: ffffffffa058b940
[  210.096906] RBP: ffff88011b2b0578 R08: 00000000852f0ec9 R09: ffffffff81cfcf9b
[  210.096909] R10: 00000000d21bdad7 R11: 0000000000000001 R12: ffff8800967b0488
[  210.096913] R13: ffff880107e17168 R14: 0000000000000068 R15: ffff8800949c0008
[  210.096920]  ? __sk_destruct+0x2c6/0x2d4
[  210.096959]  hci_event_packet+0xff5/0x7de2 [bluetooth]
[  210.096969]  ? __local_bh_enable_ip+0x43/0x5b
[  210.097004]  ? l2cap_sock_recv_cb+0x158/0x166 [bluetooth]
[  210.097039]  ? hci_le_meta_evt+0x2bb3/0x2bb3 [bluetooth]
[  210.097075]  ? l2cap_ertm_init+0x94e/0x94e [bluetooth]
[  210.097093]  ? xhci_urb_enqueue+0xbd8/0xcf5 [xhci_hcd]
[  210.097102]  ? __accumulate_pelt_segments+0x24/0x33
[  210.097109]  ? __accumulate_pelt_segments+0x24/0x33
[  210.097115]  ? __update_load_avg_se.isra.2+0x217/0x3a4
[  210.097122]  ? set_next_entity+0x7c3/0x12cd
[  210.097128]  ? pick_next_entity+0x25e/0x26c
[  210.097135]  ? pick_next_task_fair+0x2ca/0xc1a
[  210.097141]  ? switch_mm_irqs_off+0x346/0xb4f
[  210.097147]  ? __switch_to+0x769/0xbc4
[  210.097153]  ? compat_start_thread+0x66/0x66
[  210.097188]  ? hci_conn_check_link_mode+0x1cd/0x1cd [bluetooth]
[  210.097195]  ? finish_task_switch+0x392/0x431
[  210.097228]  ? hci_rx_work+0x154/0x487 [bluetooth]
[  210.097260]  hci_rx_work+0x154/0x487 [bluetooth]
[  210.097269]  process_one_work+0x579/0x9e9
[  210.097277]  worker_thread+0x68f/0x804
[  210.097285]  kthread+0x31c/0x32b
[  210.097292]  ? rescuer_thread+0x70c/0x70c
[  210.097299]  ? kthread_create_on_node+0xa3/0xa3
[  210.097306]  ret_from_fork+0x35/0x40

[  210.097314] Allocated by task 2040:
[  210.097323]  kasan_kmalloc.part.1+0x51/0xc7
[  210.097328]  __kmalloc+0x17f/0x1b6
[  210.097335]  sk_prot_alloc+0xf2/0x1a3
[  210.097340]  sk_alloc+0x22/0x297
[  210.097375]  sco_sock_alloc.constprop.7+0x23/0x202 [bluetooth]
[  210.097410]  sco_connect_cfm+0x2d0/0x566 [bluetooth]
[  210.097443]  hci_conn_request_evt.isra.53+0x6d3/0x762 [bluetooth]
[  210.097476]  hci_event_packet+0x85e/0x7de2 [bluetooth]
[  210.097507]  hci_rx_work+0x154/0x487 [bluetooth]
[  210.097512]  process_one_work+0x579/0x9e9
[  210.097517]  worker_thread+0x68f/0x804
[  210.097523]  kthread+0x31c/0x32b
[  210.097529]  ret_from_fork+0x35/0x40

[  210.097533] Freed by task 2040:
[  210.097539]  kasan_slab_free+0xb3/0x15e
[  210.097544]  kfree+0x103/0x1a9
[  210.097549]  __sk_destruct+0x2c6/0x2d4
[  210.097584]  sco_conn_del.isra.1+0xba/0x10e [bluetooth]
[  210.097617]  hci_event_packet+0xff5/0x7de2 [bluetooth]
[  210.097648]  hci_rx_work+0x154/0x487 [bluetooth]
[  210.097653]  process_one_work+0x579/0x9e9
[  210.097658]  worker_thread+0x68f/0x804
[  210.097663]  kthread+0x31c/0x32b
[  210.097670]  ret_from_fork+0x35/0x40

[  210.097676] The buggy address belongs to the object at ffff880107e170e8
 which belongs to the cache kmalloc-1024 of size 1024
[  210.097681] The buggy address is located 120 bytes inside of
 1024-byte region [ffff880107e170e8, ffff880107e174e8)
[  210.097683] The buggy address belongs to the page:
[  210.097689] page:ffffea00041f8400 count:1 mapcount:0 mapping:          (null) index:0xffff880107e15b68 compound_mapcount: 0
[  210.110194] flags: 0x8000000000008100(slab|head)
[  210.115441] raw: 8000000000008100 0000000000000000 ffff880107e15b68 0000000100170016
[  210.115448] raw: ffffea0004a47620 ffffea0004b48e20 ffff88013b80ed40 0000000000000000
[  210.115451] page dumped because: kasan: bad access detected

[  210.115454] Memory state around the buggy address:
[  210.115460]  ffff880107e17000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  210.115465]  ffff880107e17080: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb
[  210.115469] >ffff880107e17100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  210.115472]                                                        ^
[  210.115477]  ffff880107e17180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  210.115481]  ffff880107e17200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  210.115483] ==================================================================

And finally when BT_DBG() and ftrace was enabled it showed:

       <...>-14979 [001] ....   186.104191: sco_sock_kill <-sco_sock_close
       <...>-14979 [001] ....   186.104191: sco_sock_kill <-sco_sock_release
       <...>-14979 [001] ....   186.104192: sco_sock_kill: sk ef0497a0 state 9
       <...>-14979 [001] ....   186.104193: bt_sock_unlink <-sco_sock_kill
kworker/u9:2-792   [001] ....   186.104246: sco_sock_kill <-sco_conn_del
kworker/u9:2-792   [001] ....   186.104248: sco_sock_kill: sk ef0497a0 state 9
kworker/u9:2-792   [001] ....   186.104249: bt_sock_unlink <-sco_sock_kill
kworker/u9:2-792   [001] ....   186.104250: sco_sock_destruct <-__sk_destruct
kworker/u9:2-792   [001] ....   186.104250: sco_sock_destruct: sk ef0497a0
kworker/u9:2-792   [001] ....   186.104860: hci_conn_del <-hci_event_packet
kworker/u9:2-792   [001] ....   186.104864: hci_conn_del: hci0 hcon ef0484c0 handle 266

Only in the failed case, sco_sock_kill() gets called with the same sock
pointer two times. Add a check for SOCK_DEAD to avoid continue killing
a socket which has already been killed.

Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/bluetooth/sco.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -393,7 +393,8 @@ static void sco_sock_cleanup_listen(stru
  */
 static void sco_sock_kill(struct sock *sk)
 {
-	if (!sock_flag(sk, SOCK_ZAPPED) || sk->sk_socket)
+	if (!sock_flag(sk, SOCK_ZAPPED) || sk->sk_socket ||
+	    sock_flag(sk, SOCK_DEAD))
 		return;
 
 	BT_DBG("sk %p state %d", sk, sk->sk_state);

[PATCH 4.18 28/35] isdn: Disable IIOCDBGVAR

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

[ Upstream commit 5e22002aa8809e2efab2da95855f73f63e14a36c ]

It was possible to directly leak the kernel address where the isdn_dev
structure pointer was stored. This is a kernel ASLR bypass for anyone
with access to the ioctl. The code had been present since the beginning
of git history, though this shouldn't ever be needed for normal operation,
therefore remove it.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/isdn/i4l/isdn_common.c |    8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

--- a/drivers/isdn/i4l/isdn_common.c
+++ b/drivers/isdn/i4l/isdn_common.c
@@ -1640,13 +1640,7 @@ isdn_ioctl(struct file *file, uint cmd,
 			} else
 				return -EINVAL;
 		case IIOCDBGVAR:
-			if (arg) {
-				if (copy_to_user(argp, &dev, sizeof(ulong)))
-					return -EFAULT;
-				return 0;
-			} else
-				return -EINVAL;
-			break;
+			return -EINVAL;
 		default:
 			if ((cmd & IIOCDRVCTL) == IIOCDRVCTL)
 				cmd = ((cmd >> _IOC_NRSHIFT) & _IOC_NRMASK) & ISDN_DRVIOCTL_MASK;

[PATCH 4.18 29/35] net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeremy Cline <jcline@redhat.com>

[ Upstream commit 66b51b0a0341fd42ce657739bdae0561b0410a85 ]

req->sdiag_family is a user-controlled value that's used as an array
index. Sanitize it after the bounds check to avoid speculative
out-of-bounds array access.

This also protects the sock_is_registered() call, so this removes the
sanitize call there.

Fixes: e978de7a6d38 ("net: socket: Fix potential spectre v1 gadget in sock_is_registered")
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: konrad.wilk@oracle.com
Cc: jamie.iles@oracle.com
Cc: liran.alon@oracle.com
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/sock_diag.c |    2 ++
 net/socket.c         |    3 +--
 2 files changed, 3 insertions(+), 2 deletions(-)

--- a/net/core/sock_diag.c
+++ b/net/core/sock_diag.c
@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/tcp.h>
 #include <linux/workqueue.h>
+#include <linux/nospec.h>
 
 #include <linux/inet_diag.h>
 #include <linux/sock_diag.h>
@@ -218,6 +219,7 @@ static int __sock_diag_cmd(struct sk_buf
 
 	if (req->sdiag_family >= AF_MAX)
 		return -EINVAL;
+	req->sdiag_family = array_index_nospec(req->sdiag_family, AF_MAX);
 
 	if (sock_diag_handlers[req->sdiag_family] == NULL)
 		sock_load_diag_module(req->sdiag_family, 0);
--- a/net/socket.c
+++ b/net/socket.c
@@ -2690,8 +2690,7 @@ EXPORT_SYMBOL(sock_unregister);
 
 bool sock_is_registered(int family)
 {
-	return family < NPROTO &&
-		rcu_access_pointer(net_families[array_index_nospec(family, NPROTO)]);
+	return family < NPROTO && rcu_access_pointer(net_families[family]);
 }
 
 static int __init sock_init(void)

[PATCH 4.18 30/35] hv/netvsc: Fix NULL dereference at single queue mode fallback

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit b19b46346f483ae055fa027cb2d5c2ca91484b91 ]

The recent commit 916c5e1413be ("hv/netvsc: fix handling of fallback
to single queue mode") tried to fix the fallback behavior to a single
queue mode, but it changed the function to return zero incorrectly,
while the function should return an object pointer.  Eventually this
leads to a NULL dereference at the callers that expect non-NULL
value.

Fix it by returning the proper net_device object.

Fixes: 916c5e1413be ("hv/netvsc: fix handling of fallback to single queue mode")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/hyperv/rndis_filter.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/hyperv/rndis_filter.c
+++ b/drivers/net/hyperv/rndis_filter.c
@@ -1338,7 +1338,7 @@ out:
 	/* setting up multiple channels failed */
 	net_device->max_chn = 1;
 	net_device->num_chn = 1;
-	return 0;
+	return net_device;
 
 err_dev_remv:
 	rndis_filter_device_remove(dev, net_device);

[PATCH 4.18 31/35] r8169: dont use MSI-X on RTL8106e

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jian-Hong Pan <jian-hong@endlessm.com>

[ Upstream commit 7bb05b85bc2d1a1b647b91424b2ed4a18e6ecd81 ]

Found the ethernet network on ASUS X441UAR doesn't come back on resume
from suspend when using MSI-X.  The chip is RTL8106e - version 39.

[   21.848357] libphy: r8169: probed
[   21.848473] r8169 0000:02:00.0 eth0: RTL8106e, 0c:9d:92:32:67:b4, XID
44900000, IRQ 127
[   22.518860] r8169 0000:02:00.0 enp2s0: renamed from eth0
[   29.458041] Generic PHY r8169-200:00: attached PHY driver [Generic
PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[   63.227398] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full -
flow control off
[  124.514648] Generic PHY r8169-200:00: attached PHY driver [Generic
PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)

Here is the ethernet controller in detail:

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136]
(rev 07)
	Subsystem: ASUSTeK Computer Inc. RTL810xE PCI Express Fast
Ethernet controller [1043:200f]
	Flags: bus master, fast devsel, latency 0, IRQ 16
	I/O ports at e000 [size=256]
	Memory at ef100000 (64-bit, non-prefetchable) [size=4K]
	Memory at e0000000 (64-bit, prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169

Falling back to MSI fixes the issue.

Fixes: 6c6aa15fdea5 ("r8169: improve interrupt handling")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/realtek/r8169.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -7539,17 +7539,20 @@ static int rtl_alloc_irq(struct rtl8169_
 {
 	unsigned int flags;
 
-	if (tp->mac_version <= RTL_GIGA_MAC_VER_06) {
+	switch (tp->mac_version) {
+	case RTL_GIGA_MAC_VER_01 ... RTL_GIGA_MAC_VER_06:
 		RTL_W8(tp, Cfg9346, Cfg9346_Unlock);
 		RTL_W8(tp, Config2, RTL_R8(tp, Config2) & ~MSIEnable);
 		RTL_W8(tp, Cfg9346, Cfg9346_Lock);
 		flags = PCI_IRQ_LEGACY;
-	} else if (tp->mac_version == RTL_GIGA_MAC_VER_40) {
+		break;
+	case RTL_GIGA_MAC_VER_39 ... RTL_GIGA_MAC_VER_40:
 		/* This version was reported to have issues with resume
 		 * from suspend when using MSI-X
 		 */
 		flags = PCI_IRQ_LEGACY | PCI_IRQ_MSI;
-	} else {
+		break;
+	default:
 		flags = PCI_IRQ_ALL_TYPES;
 	}
 

[PATCH 4.18 32/35] ip_vti: fix a null pointer deferrence when create vti fallback tunnel

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>

[ Upstream commit cd1aa9c2c665cafbd05b83507d3f1096f3912aa4 ]

After set fb_tunnels_only_for_init_net to 1, the itn->fb_tunnel_dev will
be NULL and will cause following crash:

[ 2742.849298] BUG: unable to handle kernel NULL pointer dereference at 0000000000000941
[ 2742.851380] PGD 800000042c21a067 P4D 800000042c21a067 PUD 42aaed067 PMD 0
[ 2742.852818] Oops: 0002 [#1] SMP PTI
[ 2742.853570] CPU: 7 PID: 2484 Comm: unshare Kdump: loaded Not tainted 4.18.0-rc8+ #2
[ 2742.855163] Hardware name: Fedora Project OpenStack Nova, BIOS seabios-1.7.5-11.el7 04/01/2014
[ 2742.856970] RIP: 0010:vti_init_net+0x3a/0x50 [ip_vti]
[ 2742.858034] Code: 90 83 c0 48 c7 c2 20 a1 83 c0 48 89 fb e8 6e 3b f6 ff 85 c0 75 22 8b 0d f4 19 00 00 48 8b 93 00 14 00 00 48 8b 14 ca 48 8b 12 <c6> 82 41 09 00 00 04 c6 82 38 09 00 00 45 5b c3 66 0f 1f 44 00 00
[ 2742.861940] RSP: 0018:ffff9be28207fde0 EFLAGS: 00010246
[ 2742.863044] RAX: 0000000000000000 RBX: ffff8a71ebed4980 RCX: 0000000000000013
[ 2742.864540] RDX: 0000000000000000 RSI: 0000000000000013 RDI: ffff8a71ebed4980
[ 2742.866020] RBP: ffff8a71ea717000 R08: ffffffffc083903c R09: ffff8a71ea717000
[ 2742.867505] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a71ebed4980
[ 2742.868987] R13: 0000000000000013 R14: ffff8a71ea5b49c0 R15: 0000000000000000
[ 2742.870473] FS:  00007f02266c9740(0000) GS:ffff8a71ffdc0000(0000) knlGS:0000000000000000
[ 2742.872143] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2742.873340] CR2: 0000000000000941 CR3: 000000042bc20006 CR4: 00000000001606e0
[ 2742.874821] Call Trace:
[ 2742.875358]  ops_init+0x38/0xf0
[ 2742.876078]  setup_net+0xd9/0x1f0
[ 2742.876789]  copy_net_ns+0xb7/0x130
[ 2742.877538]  create_new_namespaces+0x11a/0x1d0
[ 2742.878525]  unshare_nsproxy_namespaces+0x55/0xa0
[ 2742.879526]  ksys_unshare+0x1a7/0x330
[ 2742.880313]  __x64_sys_unshare+0xe/0x20
[ 2742.881131]  do_syscall_64+0x5b/0x180
[ 2742.881933]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reproduce:
echo 1 > /proc/sys/net/core/fb_tunnels_only_for_init_net
modprobe ip_vti
unshare -n

Fixes: 79134e6ce2c9 ("net: do not create fallback tunnels for non-default namespaces")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/ip_vti.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/ipv4/ip_vti.c
+++ b/net/ipv4/ip_vti.c
@@ -438,7 +438,8 @@ static int __net_init vti_init_net(struc
 	if (err)
 		return err;
 	itn = net_generic(net, vti_net_id);
-	vti_fb_tunnel_init(itn->fb_tunnel_dev);
+	if (itn->fb_tunnel_dev)
+		vti_fb_tunnel_init(itn->fb_tunnel_dev);
 	return 0;
 }
 

[PATCH 4.18 33/35] net: ethernet: mvneta: Fix napi structure mixup on armada 3700

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Lunn <andrew@lunn.ch>

[ Upstream commit 7a86f05faf112463cfbbdfd222012e247de461a1 ]

The mvneta Ethernet driver is used on a few different Marvell SoCs.
Some SoCs have per cpu interrupts for Ethernet events. Some SoCs have
a single interrupt, independent of the CPU. The driver handles this by
having a per CPU napi structure when there are per CPU interrupts, and
a global napi structure when there is a single interrupt.

When the napi core calls mvneta_poll(), it passes the napi
instance. This was not being propagated through the call chain, and
instead the per-cpu napi instance was passed to napi_gro_receive()
call. This breaks when there is a single global napi instance.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 2636ac3cc2b4 ("net: mvneta: Add network support for Armada 3700 SoC")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/marvell/mvneta.c |   22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -1901,10 +1901,10 @@ static void mvneta_rxq_drop_pkts(struct
 }
 
 /* Main rx processing when using software buffer management */
-static int mvneta_rx_swbm(struct mvneta_port *pp, int rx_todo,
+static int mvneta_rx_swbm(struct napi_struct *napi,
+			  struct mvneta_port *pp, int rx_todo,
 			  struct mvneta_rx_queue *rxq)
 {
-	struct mvneta_pcpu_port *port = this_cpu_ptr(pp->ports);
 	struct net_device *dev = pp->dev;
 	int rx_done;
 	u32 rcvd_pkts = 0;
@@ -1959,7 +1959,7 @@ err_drop_frame:
 
 			skb->protocol = eth_type_trans(skb, dev);
 			mvneta_rx_csum(pp, rx_status, skb);
-			napi_gro_receive(&port->napi, skb);
+			napi_gro_receive(napi, skb);
 
 			rcvd_pkts++;
 			rcvd_bytes += rx_bytes;
@@ -2001,7 +2001,7 @@ err_drop_frame:
 
 		mvneta_rx_csum(pp, rx_status, skb);
 
-		napi_gro_receive(&port->napi, skb);
+		napi_gro_receive(napi, skb);
 	}
 
 	if (rcvd_pkts) {
@@ -2020,10 +2020,10 @@ err_drop_frame:
 }
 
 /* Main rx processing when using hardware buffer management */
-static int mvneta_rx_hwbm(struct mvneta_port *pp, int rx_todo,
+static int mvneta_rx_hwbm(struct napi_struct *napi,
+			  struct mvneta_port *pp, int rx_todo,
 			  struct mvneta_rx_queue *rxq)
 {
-	struct mvneta_pcpu_port *port = this_cpu_ptr(pp->ports);
 	struct net_device *dev = pp->dev;
 	int rx_done;
 	u32 rcvd_pkts = 0;
@@ -2085,7 +2085,7 @@ err_drop_frame:
 
 			skb->protocol = eth_type_trans(skb, dev);
 			mvneta_rx_csum(pp, rx_status, skb);
-			napi_gro_receive(&port->napi, skb);
+			napi_gro_receive(napi, skb);
 
 			rcvd_pkts++;
 			rcvd_bytes += rx_bytes;
@@ -2129,7 +2129,7 @@ err_drop_frame:
 
 		mvneta_rx_csum(pp, rx_status, skb);
 
-		napi_gro_receive(&port->napi, skb);
+		napi_gro_receive(napi, skb);
 	}
 
 	if (rcvd_pkts) {
@@ -2722,9 +2722,11 @@ static int mvneta_poll(struct napi_struc
 	if (rx_queue) {
 		rx_queue = rx_queue - 1;
 		if (pp->bm_priv)
-			rx_done = mvneta_rx_hwbm(pp, budget, &pp->rxqs[rx_queue]);
+			rx_done = mvneta_rx_hwbm(napi, pp, budget,
+						 &pp->rxqs[rx_queue]);
 		else
-			rx_done = mvneta_rx_swbm(pp, budget, &pp->rxqs[rx_queue]);
+			rx_done = mvneta_rx_swbm(napi, pp, budget,
+						 &pp->rxqs[rx_queue]);
 	}
 
 	if (rx_done < budget) {

[PATCH 4.18 34/35] net: mvneta: fix mvneta_config_rss on armada 3700

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jisheng Zhang <Jisheng.Zhang@synaptics.com>

[ Upstream commit 0f5c6c30a0f8c629b92ecdaef61b315c43fde10a ]

The mvneta Ethernet driver is used on a few different Marvell SoCs.
Some SoCs have per cpu interrupts for Ethernet events, the driver uses
a per CPU napi structure for this case. Some SoCs such as armada 3700
have a single interrupt for Ethernet events, the driver uses a global
napi structure for this case.

Current mvneta_config_rss() always operates the per cpu napi structure.
Fix it by operating a global napi for "single interrupt" case, and per
cpu napi structure for remaining cases.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Fixes: 2636ac3cc2b4 ("net: mvneta: Add network support for Armada 3700 SoC")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/marvell/mvneta.c |   35 +++++++++++++++++++++-------------
 1 file changed, 22 insertions(+), 13 deletions(-)

--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -4020,13 +4020,18 @@ static int  mvneta_config_rss(struct mvn
 
 	on_each_cpu(mvneta_percpu_mask_interrupt, pp, true);
 
-	/* We have to synchronise on the napi of each CPU */
-	for_each_online_cpu(cpu) {
-		struct mvneta_pcpu_port *pcpu_port =
-			per_cpu_ptr(pp->ports, cpu);
-
-		napi_synchronize(&pcpu_port->napi);
-		napi_disable(&pcpu_port->napi);
+	if (!pp->neta_armada3700) {
+		/* We have to synchronise on the napi of each CPU */
+		for_each_online_cpu(cpu) {
+			struct mvneta_pcpu_port *pcpu_port =
+				per_cpu_ptr(pp->ports, cpu);
+
+			napi_synchronize(&pcpu_port->napi);
+			napi_disable(&pcpu_port->napi);
+		}
+	} else {
+		napi_synchronize(&pp->napi);
+		napi_disable(&pp->napi);
 	}
 
 	pp->rxq_def = pp->indir[0];
@@ -4043,12 +4048,16 @@ static int  mvneta_config_rss(struct mvn
 	mvneta_percpu_elect(pp);
 	spin_unlock(&pp->lock);
 
-	/* We have to synchronise on the napi of each CPU */
-	for_each_online_cpu(cpu) {
-		struct mvneta_pcpu_port *pcpu_port =
-			per_cpu_ptr(pp->ports, cpu);
-
-		napi_enable(&pcpu_port->napi);
+	if (!pp->neta_armada3700) {
+		/* We have to synchronise on the napi of each CPU */
+		for_each_online_cpu(cpu) {
+			struct mvneta_pcpu_port *pcpu_port =
+				per_cpu_ptr(pp->ports, cpu);
+
+			napi_enable(&pcpu_port->napi);
+		}
+	} else {
+		napi_enable(&pp->napi);
 	}
 
 	netif_tx_start_all_queues(pp->dev);

[PATCH 4.18 35/35] cls_matchall: fix tcf_unbind_filter missing

[Greg Kroah-Hartman]

4.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hangbin Liu <liuhangbin@gmail.com>

[ Upstream commit a51c76b4dfb30496dc65396a957ef0f06af7fb22 ]

Fix tcf_unbind_filter missing in cls_matchall as this will trigger
WARN_ON() in cbq_destroy_class().

Fixes: fd62d9f5c575f ("net/sched: matchall: Fix configuration race")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/cls_matchall.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/sched/cls_matchall.c
+++ b/net/sched/cls_matchall.c
@@ -111,6 +111,8 @@ static void mall_destroy(struct tcf_prot
 	if (!head)
 		return;
 
+	tcf_unbind_filter(tp, &head->res);
+
 	if (!tc_skip_hw(head->flags))
 		mall_destroy_hw_filter(tp, head, (unsigned long) head, extack);
 

Re: [PATCH 4.18 00/35] 4.18.4-stable review

[Guenter Roeck]

On Tue, Aug 21, 2018 at 08:20:26AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.18.4 release.
> There are 35 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Aug 23 05:50:07 UTC 2018.
> Anything received after that time might be too late.
> 

Build results:
	total: 134 pass: 134 fail: 0
Qemu test results:
	total: 302 pass: 302 fail: 0

Details are available at http://kerneltests.org/builders/.

Guenter

Re: [PATCH 4.18 00/35] 4.18.4-stable review

[Greg Kroah-Hartman]

On Tue, Aug 21, 2018 at 07:59:17AM -0700, Guenter Roeck wrote:
> On Tue, Aug 21, 2018 at 08:20:26AM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.18.4 release.
> > There are 35 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Thu Aug 23 05:50:07 UTC 2018.
> > Anything received after that time might be too late.
> > 
> 
> Build results:
> 	total: 134 pass: 134 fail: 0
> Qemu test results:
> 	total: 302 pass: 302 fail: 0
> 
> Details are available at http://kerneltests.org/builders/.

Wonderful, thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 4.18 00/35] 4.18.4-stable review

[Naresh Kamboju]

On 21 August 2018 at 11:50, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 4.18.4 release.
> There are 35 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Aug 23 05:50:07 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.18.4-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.18.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm and x86_64.

Summary
------------------------------------------------------------------------

kernel: 4.18.4-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.18.y
git commit: 1b2dc862d5f32eded2e22e173a92771c81dbe5dd
git describe: v4.18.3-36-g1b2dc862d5f3
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.18-oe/build/v4.18.3-36-g1b2dc862d5f3

No regressions (compared to build v4.18.3)


Ran 15693 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* boot
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* ltp-open-posix-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.18 00/35] 4.18.4-stable review

[Greg Kroah-Hartman]

On Tue, Aug 21, 2018 at 11:33:32PM +0530, Naresh Kamboju wrote:
> On 21 August 2018 at 11:50, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> > This is the start of the stable review cycle for the 4.18.4 release.
> > There are 35 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Thu Aug 23 05:50:07 UTC 2018.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> >         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.18.4-rc1.gz
> > or in the git tree and branch at:
> >         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.18.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> 
> Results from Linaro’s test farm.
> No regressions on arm64, arm and x86_64.

Wonderful, thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 4.18 00/35] 4.18.4-stable review

[Shuah Khan]

On 08/21/2018 12:20 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.18.4 release.
> There are 35 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Aug 23 05:50:07 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.18.4-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.18.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 4.18 00/35] 4.18.4-stable review

[Greg Kroah-Hartman]

On Tue, Aug 21, 2018 at 01:43:08PM -0600, Shuah Khan wrote:
> On 08/21/2018 12:20 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.18.4 release.
> > There are 35 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Thu Aug 23 05:50:07 UTC 2018.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.18.4-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.18.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> > 
> 
> Compiled and booted on my test system. No dmesg regressions.

Great, thanks for testing these and letting me know.

greg k-h