[PATCH 0/4] tty: Hold write ldisc sem in tty_reopen()

[PATCH 0/4] tty: Hold write ldisc sem in tty_reopen()

[Dmitry Safonov]

Two fixes for potential and real issues.
Looks worth to have in stables as we've hit it on v4.9 stable.
And for linux-next - adding lockdep asserts for line discipline changing
code, verifying that write ldisc sem will be held forthwith.

I couldn't verify that holding write lock fixes the issue as we've hit
it only once and I've failed in reproducing it.
But searching in lkml, Cc'ing here people who probably had the same
crash (and in hope someone of them could give tested-by):

Cc: Daniel Axtens <dja@axtens.net> 
Cc: Dmitry Vyukov <dvyukov@google.com> 
Cc: Michael Neuling <mikey@neuling.org>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Pasi Kärkkäinen <pasik@iki.fi>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> 
Cc: Tan Xiaojun <tanxiaojun@huawei.com>
(please, ignore if I Cc'ed you mistakenly)

Dmitry Safonov (4):
  tty: Drop tty->count on tty_reopen() failure
  tty: Hold tty_ldisc_lock() during tty_reopen()
  tty: Lock tty pair in tty_init_dev()
  tty/lockdep: Add ldisc_sem asserts

 drivers/tty/tty_io.c    | 21 +++++++++++++++------
 drivers/tty/tty_ldisc.c | 12 ++++++++----
 include/linux/tty.h     |  4 ++++
 3 files changed, 27 insertions(+), 10 deletions(-)

-- 
2.13.6

[PATCH 1/4] tty: Drop tty->count on tty_reopen() failure

[Dmitry Safonov]

In case of tty_ldisc_reinit() failure, tty->count should be decremented
back, otherwise we will never release_tty().
Never seen it in the real life, but it seems not really hard to hit.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Safonov <dima@arista.com>
---
 drivers/tty/tty_io.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 32bc3e3fe4d3..5e5da9acaf0a 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1255,6 +1255,7 @@ static void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *
 static int tty_reopen(struct tty_struct *tty)
 {
 	struct tty_driver *driver = tty->driver;
+	int retval;
 
 	if (driver->type == TTY_DRIVER_TYPE_PTY &&
 	    driver->subtype == PTY_TYPE_MASTER)
@@ -1268,10 +1269,14 @@ static int tty_reopen(struct tty_struct *tty)
 
 	tty->count++;
 
-	if (!tty->ldisc)
-		return tty_ldisc_reinit(tty, tty->termios.c_line);
+	if (tty->ldisc)
+		return 0;
 
-	return 0;
+	retval = tty_ldisc_reinit(tty, tty->termios.c_line);
+	if (retval)
+		tty->count--;
+
+	return retval;
 }
 
 /**
-- 
2.13.6

[PATCH 2/4] tty: Hold tty_ldisc_lock() during tty_reopen()

[Dmitry Safonov]

tty_ldisc_reinit() doesn't race with neither tty_ldisc_hangup()
nor set_ldisc() nor tty_ldisc_release() as they use tty lock.
But it races with anyone who expects line discipline to be the same
after hoding read semaphore in tty_ldisc_ref().

We've seen the following crash on v4.9.108 stable:

BUG: unable to handle kernel paging request at 0000000000002260
IP: [..] n_tty_receive_buf_common+0x5f/0x86d
Workqueue: events_unbound flush_to_ldisc
Call Trace:
 [..] n_tty_receive_buf2
 [..] tty_ldisc_receive_buf
 [..] flush_to_ldisc
 [..] process_one_work
 [..] worker_thread
 [..] kthread
 [..] ret_from_fork

I think, tty_ldisc_reinit() should be called with ldisc_sem hold for
writing, which will protect any reader against line discipline changes.

Note: I failed to reproduce the described crash, so obiviously can't
guarantee that this is the place where line discipline was switched.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Safonov <dima@arista.com>
---
 drivers/tty/tty_io.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 5e5da9acaf0a..3ef8b977b167 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1267,15 +1267,20 @@ static int tty_reopen(struct tty_struct *tty)
 	if (test_bit(TTY_EXCLUSIVE, &tty->flags) && !capable(CAP_SYS_ADMIN))
 		return -EBUSY;
 
-	tty->count++;
+	retval = tty_ldisc_lock(tty, 5 * HZ);
+	if (retval)
+		return retval;
 
+	tty->count++;
 	if (tty->ldisc)
-		return 0;
+		goto out_unlock;
 
 	retval = tty_ldisc_reinit(tty, tty->termios.c_line);
 	if (retval)
 		tty->count--;
 
+out_unlock:
+	tty_ldisc_unlock(tty);
 	return retval;
 }
 
-- 
2.13.6

[PATCH 3/4] tty: Lock tty pair in tty_init_dev()

[Dmitry Safonov]

It's safe to not lock both here - done to silence attempt lockdep assert in
tty_ldisc_open(), which will be added with following patch.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
---
 drivers/tty/tty_io.c    | 5 ++---
 drivers/tty/tty_ldisc.c | 6 ++----
 include/linux/tty.h     | 4 ++++
 3 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 3ef8b977b167..a94005f915b3 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1342,7 +1342,7 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
 			"%s: %s driver does not set tty->port. This will crash the kernel later. Fix the driver!\n",
 			__func__, tty->driver->name);
 
-	retval = tty_ldisc_lock(tty, 5 * HZ);
+	retval = tty_ldisc_lock_pair_timeout(tty, tty->link, 5 * HZ);
 	if (retval)
 		goto err_release_lock;
 	tty->port->itty = tty;
@@ -1353,9 +1353,9 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
 	 * to decrement the use counts, as release_tty doesn't care.
 	 */
 	retval = tty_ldisc_setup(tty, tty->link);
+	tty_ldisc_unlock_pair(tty, tty->link);
 	if (retval)
 		goto err_release_tty;
-	tty_ldisc_unlock(tty);
 	/* Return the tty locked so that it cannot vanish under the caller */
 	return tty;
 
@@ -1368,7 +1368,6 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
 
 	/* call the tty release_tty routine to clean out this slot */
 err_release_tty:
-	tty_ldisc_unlock(tty);
 	tty_info_ratelimited(tty, "ldisc open failed (%d), clearing slot %d\n",
 			     retval, idx);
 err_release_lock:
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index fc4c97cae01e..b72266461c00 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -340,8 +340,7 @@ void tty_ldisc_unlock(struct tty_struct *tty)
 	__tty_ldisc_unlock(tty);
 }
 
-static int
-tty_ldisc_lock_pair_timeout(struct tty_struct *tty, struct tty_struct *tty2,
+int tty_ldisc_lock_pair_timeout(struct tty_struct *tty, struct tty_struct *tty2,
 			    unsigned long timeout)
 {
 	int ret;
@@ -381,8 +380,7 @@ static void tty_ldisc_lock_pair(struct tty_struct *tty, struct tty_struct *tty2)
 	tty_ldisc_lock_pair_timeout(tty, tty2, MAX_SCHEDULE_TIMEOUT);
 }
 
-static void tty_ldisc_unlock_pair(struct tty_struct *tty,
-				  struct tty_struct *tty2)
+void tty_ldisc_unlock_pair(struct tty_struct *tty, struct tty_struct *tty2)
 {
 	__tty_ldisc_unlock(tty);
 	if (tty2)
diff --git a/include/linux/tty.h b/include/linux/tty.h
index c56e3978b00f..5efb8f87ffdc 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -409,6 +409,10 @@ extern void tty_kclose(struct tty_struct *tty);
 extern int tty_dev_name_to_number(const char *name, dev_t *number);
 extern int tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout);
 extern void tty_ldisc_unlock(struct tty_struct *tty);
+extern int tty_ldisc_lock_pair_timeout(struct tty_struct *tty,
+		struct tty_struct *tty2, unsigned long timeout);
+extern void tty_ldisc_unlock_pair(struct tty_struct *tty,
+		struct tty_struct *tty2);
 #else
 static inline void tty_kref_put(struct tty_struct *tty)
 { }
-- 
2.13.6

[PATCH 4/4] tty/lockdep: Add ldisc_sem asserts

[Dmitry Safonov]

It should nicely document that each change to line discipline should
held write semaphor. Otherwise potential reader will have a good time.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
---
 drivers/tty/tty_ldisc.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index b72266461c00..9ef0b33a4132 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -444,6 +444,7 @@ static void tty_set_termios_ldisc(struct tty_struct *tty, int disc)
 
 static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld)
 {
+	lockdep_assert_held(&tty->ldisc_sem);
 	WARN_ON(test_and_set_bit(TTY_LDISC_OPEN, &tty->flags));
 	if (ld->ops->open) {
 		int ret;
@@ -469,6 +470,7 @@ static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld)
 
 static void tty_ldisc_close(struct tty_struct *tty, struct tty_ldisc *ld)
 {
+	lockdep_assert_held(&tty->ldisc_sem);
 	WARN_ON(!test_bit(TTY_LDISC_OPEN, &tty->flags));
 	clear_bit(TTY_LDISC_OPEN, &tty->flags);
 	if (ld->ops->close)
@@ -490,6 +492,7 @@ static int tty_ldisc_failto(struct tty_struct *tty, int ld)
 	struct tty_ldisc *disc = tty_ldisc_get(tty, ld);
 	int r;
 
+	lockdep_assert_held(&tty->ldisc_sem);
 	if (IS_ERR(disc))
 		return PTR_ERR(disc);
 	tty->ldisc = disc;
@@ -613,6 +616,7 @@ EXPORT_SYMBOL_GPL(tty_set_ldisc);
  */
 static void tty_ldisc_kill(struct tty_struct *tty)
 {
+	lockdep_assert_held(&tty->ldisc_sem);
 	if (!tty->ldisc)
 		return;
 	/*
@@ -660,6 +664,7 @@ int tty_ldisc_reinit(struct tty_struct *tty, int disc)
 	struct tty_ldisc *ld;
 	int retval;
 
+	lockdep_assert_held(&tty->ldisc_sem);
 	ld = tty_ldisc_get(tty, disc);
 	if (IS_ERR(ld)) {
 		BUG_ON(disc == N_TTY);
@@ -823,6 +828,7 @@ int tty_ldisc_init(struct tty_struct *tty)
  */
 void tty_ldisc_deinit(struct tty_struct *tty)
 {
+	/* no ldisc_sem, tty is being destroyed */
 	if (tty->ldisc)
 		tty_ldisc_put(tty->ldisc);
 	tty->ldisc = NULL;
-- 
2.13.6

Re: [PATCH 2/4] tty: Hold tty_ldisc_lock() during tty_reopen()

[Sergey Senozhatsky]

Hi,

Cc-ing Benjamin on this.

On (08/29/18 03:23), Dmitry Safonov wrote:
> BUG: unable to handle kernel paging request at 0000000000002260
> IP: [..] n_tty_receive_buf_common+0x5f/0x86d
> Workqueue: events_unbound flush_to_ldisc
> Call Trace:
>  [..] n_tty_receive_buf2
>  [..] tty_ldisc_receive_buf
>  [..] flush_to_ldisc
>  [..] process_one_work
>  [..] worker_thread
>  [..] kthread
>  [..] ret_from_fork

Seems that you are not the first one to hit this NULL deref.

> I think, tty_ldisc_reinit() should be called with ldisc_sem hold for
> writing, which will protect any reader against line discipline changes.

Per https://lore.kernel.org/patchwork/patch/777220/

: Note that we noticed one path that called reinit without the ldisc lock
: held for writing, we added that, but it didn't fix the problem.

And I guess that Ben meant the same reinit path which you patched:

> @@ -1267,15 +1267,20 @@ static int tty_reopen(struct tty_struct *tty)
>  	if (test_bit(TTY_EXCLUSIVE, &tty->flags) && !capable(CAP_SYS_ADMIN))
>  		return -EBUSY;
>  
> -	tty->count++;
> +	retval = tty_ldisc_lock(tty, 5 * HZ);
> +	if (retval)
> +		return retval;
>  
> +	tty->count++;
>  	if (tty->ldisc)
> -		return 0;
> +		goto out_unlock;
>  
>  	retval = tty_ldisc_reinit(tty, tty->termios.c_line);
>  	if (retval)
>  		tty->count--;
>  
> +out_unlock:
> +	tty_ldisc_unlock(tty);
>  	return retval;
>  }

	-ss

Re: [PATCH 2/4] tty: Hold tty_ldisc_lock() during tty_reopen()

[Dmitry Safonov]

Hi Sergey,

On Wed, 2018-08-29 at 13:34 +0900, Sergey Senozhatsky wrote:
> Hi,
> 
> Cc-ing Benjamin on this.

Thanks!

> On (08/29/18 03:23), Dmitry Safonov wrote:
> > BUG: unable to handle kernel paging request at 0000000000002260
> > IP: [..] n_tty_receive_buf_common+0x5f/0x86d
> > Workqueue: events_unbound flush_to_ldisc
> > Call Trace:
> >  [..] n_tty_receive_buf2
> >  [..] tty_ldisc_receive_buf
> >  [..] flush_to_ldisc
> >  [..] process_one_work
> >  [..] worker_thread
> >  [..] kthread
> >  [..] ret_from_fork
> 
> Seems that you are not the first one to hit this NULL deref.
> 
> > I think, tty_ldisc_reinit() should be called with ldisc_sem hold
> > for
> > writing, which will protect any reader against line discipline
> > changes.
> 
> Per https://lore.kernel.org/patchwork/patch/777220/
> 
> : Note that we noticed one path that called reinit without the ldisc
> lock
> : held for writing, we added that, but it didn't fix the problem.

Probably, it's worth to know what exactly has he tried and what was the
backtrace he got in the result..
Hopefully, we'll hear more.

It might be also worth to review tty_ldisc_deinit(), I thought it's
safe to destroy ldisc there under tty lock during tty release, but may
be that is another non-safe place.

-- 
Thanks again,
             Dmitry

Re: [PATCH 1/4] tty: Drop tty->count on tty_reopen() failure

[Jiri Slaby]

On 08/29/2018, 04:23 AM, Dmitry Safonov wrote:
> In case of tty_ldisc_reinit() failure, tty->count should be decremented
> back, otherwise we will never release_tty().
> Never seen it in the real life, but it seems not really hard to hit.

I did see it. And this fixes it.

> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Jiri Slaby <jslaby@suse.com>
> Cc: stable@vger.kernel.org
> Signed-off-by: Dmitry Safonov <dima@arista.com>
> ---
>  drivers/tty/tty_io.c | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
> index 32bc3e3fe4d3..5e5da9acaf0a 100644
> --- a/drivers/tty/tty_io.c
> +++ b/drivers/tty/tty_io.c
> @@ -1255,6 +1255,7 @@ static void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *
>  static int tty_reopen(struct tty_struct *tty)
>  {
>  	struct tty_driver *driver = tty->driver;
> +	int retval;
>  
>  	if (driver->type == TTY_DRIVER_TYPE_PTY &&
>  	    driver->subtype == PTY_TYPE_MASTER)
> @@ -1268,10 +1269,14 @@ static int tty_reopen(struct tty_struct *tty)
>  
>  	tty->count++;
>  
> -	if (!tty->ldisc)
> -		return tty_ldisc_reinit(tty, tty->termios.c_line);
> +	if (tty->ldisc)
> +		return 0;
>  
> -	return 0;
> +	retval = tty_ldisc_reinit(tty, tty->termios.c_line);
> +	if (retval)
> +		tty->count--;

I would just do:
  if (!retval)
    tty->count++;
here. Nobody from ldiscs should rely on tty->count.

> +	return retval;

thanks,
-- 
js
suse labs

Re: [PATCH 2/4] tty: Hold tty_ldisc_lock() during tty_reopen()

[Jiri Slaby]

On 08/29/2018, 04:23 AM, Dmitry Safonov wrote:
> tty_ldisc_reinit() doesn't race with neither tty_ldisc_hangup()
> nor set_ldisc() nor tty_ldisc_release() as they use tty lock.
> But it races with anyone who expects line discipline to be the same
> after hoding read semaphore in tty_ldisc_ref().
> 
> We've seen the following crash on v4.9.108 stable:
> 
> BUG: unable to handle kernel paging request at 0000000000002260
> IP: [..] n_tty_receive_buf_common+0x5f/0x86d
> Workqueue: events_unbound flush_to_ldisc
> Call Trace:
>  [..] n_tty_receive_buf2
>  [..] tty_ldisc_receive_buf
>  [..] flush_to_ldisc
>  [..] process_one_work
>  [..] worker_thread
>  [..] kthread
>  [..] ret_from_fork
> 
> I think, tty_ldisc_reinit() should be called with ldisc_sem hold for
> writing, which will protect any reader against line discipline changes.
> 
> Note: I failed to reproduce the described crash, so obiviously can't
> guarantee that this is the place where line discipline was switched.
> 
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Jiri Slaby <jslaby@suse.com>
> Cc: stable@vger.kernel.org
> Signed-off-by: Dmitry Safonov <dima@arista.com>
> ---
>  drivers/tty/tty_io.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
> index 5e5da9acaf0a..3ef8b977b167 100644
> --- a/drivers/tty/tty_io.c
> +++ b/drivers/tty/tty_io.c
> @@ -1267,15 +1267,20 @@ static int tty_reopen(struct tty_struct *tty)
>  	if (test_bit(TTY_EXCLUSIVE, &tty->flags) && !capable(CAP_SYS_ADMIN))
>  		return -EBUSY;
>  
> -	tty->count++;
> +	retval = tty_ldisc_lock(tty, 5 * HZ);

Why 5 secs? This would cause random errors on machines under heavy load.

> +	if (retval)
> +		return retval;
>  
> +	tty->count++;
>  	if (tty->ldisc)
> -		return 0;
> +		goto out_unlock;
>  
>  	retval = tty_ldisc_reinit(tty, tty->termios.c_line);
>  	if (retval)
>  		tty->count--;
>  
> +out_unlock:
> +	tty_ldisc_unlock(tty);
>  	return retval;

So what about:
        tty_ldisc_lock(tty, MAX_SCHEDULE_TIMEOUT);
        if (!tty->ldisc)
                ret = tty_ldisc_reinit(tty, tty->termios.c_line);
        tty_ldisc_unlock(tty);

        if (!ret)
                tty->count++;

        return ret;

thanks,
-- 
js
suse labs

Re: [PATCH 2/4] tty: Hold tty_ldisc_lock() during tty_reopen()

[Jiri Slaby]

On 08/29/2018, 04:40 PM, Jiri Slaby wrote:
> On 08/29/2018, 04:23 AM, Dmitry Safonov wrote:
>> tty_ldisc_reinit() doesn't race with neither tty_ldisc_hangup()
>> nor set_ldisc() nor tty_ldisc_release() as they use tty lock.
>> But it races with anyone who expects line discipline to be the same
>> after hoding read semaphore in tty_ldisc_ref().
>>
>> We've seen the following crash on v4.9.108 stable:
>>
>> BUG: unable to handle kernel paging request at 0000000000002260
>> IP: [..] n_tty_receive_buf_common+0x5f/0x86d
>> Workqueue: events_unbound flush_to_ldisc
>> Call Trace:
>>  [..] n_tty_receive_buf2
>>  [..] tty_ldisc_receive_buf
>>  [..] flush_to_ldisc
>>  [..] process_one_work
>>  [..] worker_thread
>>  [..] kthread
>>  [..] ret_from_fork
>>
>> I think, tty_ldisc_reinit() should be called with ldisc_sem hold for
>> writing, which will protect any reader against line discipline changes.
>>
>> Note: I failed to reproduce the described crash, so obiviously can't
>> guarantee that this is the place where line discipline was switched.

...

> So what about:
>         tty_ldisc_lock(tty, MAX_SCHEDULE_TIMEOUT);
>         if (!tty->ldisc)
>                 ret = tty_ldisc_reinit(tty, tty->termios.c_line);
>         tty_ldisc_unlock(tty);
> 
>         if (!ret)
>                 tty->count++;
> 
>         return ret;

I forgot to add that I debugged a different NULL ptr deref to this very
same root cause today (set_termios called with NULL tty->disc_data). So
really, tty_reinit's ldisc change must be protected by the ldisc_sem,
otherwise other threads will see tty->ldisc, but not tty->disc_data.

thanks,
-- 
js
suse labs

Re: [PATCH 3/4] tty: Lock tty pair in tty_init_dev()

[Jiri Slaby]

On 08/29/2018, 04:23 AM, Dmitry Safonov wrote:
> It's safe to not lock both here - done to silence attempt lockdep assert in
> tty_ldisc_open(), which will be added with following patch.

SOrry, could you elaborate here? I don't follow...

thanks,
-- 
js
suse labs

Re: [PATCH 2/4] tty: Hold tty_ldisc_lock() during tty_reopen()

[Tetsuo Handa]

On 2018/08/29 11:23, Dmitry Safonov wrote:
> tty_ldisc_reinit() doesn't race with neither tty_ldisc_hangup()
> nor set_ldisc() nor tty_ldisc_release() as they use tty lock.
> But it races with anyone who expects line discipline to be the same
> after hoding read semaphore in tty_ldisc_ref().
> 
> We've seen the following crash on v4.9.108 stable:
> 
> BUG: unable to handle kernel paging request at 0000000000002260
> IP: [..] n_tty_receive_buf_common+0x5f/0x86d
> Workqueue: events_unbound flush_to_ldisc
> Call Trace:
>  [..] n_tty_receive_buf2
>  [..] tty_ldisc_receive_buf
>  [..] flush_to_ldisc
>  [..] process_one_work
>  [..] worker_thread
>  [..] kthread
>  [..] ret_from_fork
> 
> I think, tty_ldisc_reinit() should be called with ldisc_sem hold for
> writing, which will protect any reader against line discipline changes.
> 
> Note: I failed to reproduce the described crash, so obiviously can't
> guarantee that this is the place where line discipline was switched.

This will be same with a report at
https://syzkaller.appspot.com/bug?id=f08670354701fa64cc0dd3c0128a491bdb16adcc .

syzbot is now testing a patch from Jiri Slaby.

Re: [PATCH 1/4] tty: Drop tty->count on tty_reopen() failure

[Dmitry Safonov]

On Wed, 2018-08-29 at 16:38 +0200, Jiri Slaby wrote:
> On 08/29/2018, 04:23 AM, Dmitry Safonov wrote:
> > In case of tty_ldisc_reinit() failure, tty->count should be
> > decremented
> > back, otherwise we will never release_tty().
> > Never seen it in the real life, but it seems not really hard to
> > hit.
> 
> I did see it. And this fixes it.

Thanks, I'll add your tested-by, if I'll have to resend.

> 
> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > Cc: Jiri Slaby <jslaby@suse.com>
> > Cc: stable@vger.kernel.org
> > Signed-off-by: Dmitry Safonov <dima@arista.com>
> > ---
> >  drivers/tty/tty_io.c | 11 ++++++++---
> >  1 file changed, 8 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
> > index 32bc3e3fe4d3..5e5da9acaf0a 100644
> > --- a/drivers/tty/tty_io.c
> > +++ b/drivers/tty/tty_io.c
> > @@ -1255,6 +1255,7 @@ static void tty_driver_remove_tty(struct
> > tty_driver *driver, struct tty_struct *
> >  static int tty_reopen(struct tty_struct *tty)
> >  {
> >  	struct tty_driver *driver = tty->driver;
> > +	int retval;
> >  
> >  	if (driver->type == TTY_DRIVER_TYPE_PTY &&
> >  	    driver->subtype == PTY_TYPE_MASTER)
> > @@ -1268,10 +1269,14 @@ static int tty_reopen(struct tty_struct
> > *tty)
> >  
> >  	tty->count++;
> >  
> > -	if (!tty->ldisc)
> > -		return tty_ldisc_reinit(tty, tty->termios.c_line);
> > +	if (tty->ldisc)
> > +		return 0;
> >  
> > -	return 0;
> > +	retval = tty_ldisc_reinit(tty, tty->termios.c_line);
> > +	if (retval)
> > +		tty->count--;
> 
> I would just do:
>   if (!retval)
>     tty->count++;
> here. Nobody from ldiscs should rely on tty->count.

I thought about that and probably should have described in commit
message why I haven't done that: I prefer to keep it as was as I did Cc
stable tree - to keep the chance of regression to minimum.

I agree that your way is cleaner, but probably it may be done as
cleanup on top for linux-next..

-- 
Thanks,
             Dmitry

Re: [PATCH 3/4] tty: Lock tty pair in tty_init_dev()

[Dmitry Safonov]

On Wed, 2018-08-29 at 16:46 +0200, Jiri Slaby wrote:
> On 08/29/2018, 04:23 AM, Dmitry Safonov wrote:
> > It's safe to not lock both here - done to silence attempt lockdep
> > assert in
> > tty_ldisc_open(), which will be added with following patch.
> 
> SOrry, could you elaborate here? I don't follow...

Sure, 4/4 patch adds lockdep_assert_held() into tty_ldisc_open().
Currently ldisc in tty->link isn't locked, which according to code
shouldn't be an issue, as far as I can see.

So, this patch silences lockdep warining by holding the semaphore,
which is slowpath anyway and doesn't case any new contention.

(actually, not holding the semaphore for slave might be an issue if one
opens slave before it's fully initialized, but I'm not sure if it's
possible).

-- 
Thanks,
             Dmitry

Re: [PATCH 2/4] tty: Hold tty_ldisc_lock() during tty_reopen()

[Dmitry Safonov]

On Wed, 2018-08-29 at 16:40 +0200, Jiri Slaby wrote:
> On 08/29/2018, 04:23 AM, Dmitry Safonov wrote:
> > tty_ldisc_reinit() doesn't race with neither tty_ldisc_hangup()
> > nor set_ldisc() nor tty_ldisc_release() as they use tty lock.
> > But it races with anyone who expects line discipline to be the same
> > after hoding read semaphore in tty_ldisc_ref().
> > 
> > We've seen the following crash on v4.9.108 stable:
> > 
> > BUG: unable to handle kernel paging request at 0000000000002260
> > IP: [..] n_tty_receive_buf_common+0x5f/0x86d
> > Workqueue: events_unbound flush_to_ldisc
> > Call Trace:
> >  [..] n_tty_receive_buf2
> >  [..] tty_ldisc_receive_buf
> >  [..] flush_to_ldisc
> >  [..] process_one_work
> >  [..] worker_thread
> >  [..] kthread
> >  [..] ret_from_fork
> > 
> > I think, tty_ldisc_reinit() should be called with ldisc_sem hold
> > for
> > writing, which will protect any reader against line discipline
> > changes.
> > 
> > Note: I failed to reproduce the described crash, so obiviously
> > can't
> > guarantee that this is the place where line discipline was
> > switched.
> > 
> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > Cc: Jiri Slaby <jslaby@suse.com>
> > Cc: stable@vger.kernel.org
> > Signed-off-by: Dmitry Safonov <dima@arista.com>
> > ---
> >  drivers/tty/tty_io.c | 9 +++++++--
> >  1 file changed, 7 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
> > index 5e5da9acaf0a..3ef8b977b167 100644
> > --- a/drivers/tty/tty_io.c
> > +++ b/drivers/tty/tty_io.c
> > @@ -1267,15 +1267,20 @@ static int tty_reopen(struct tty_struct
> > *tty)
> >  	if (test_bit(TTY_EXCLUSIVE, &tty->flags) &&
> > !capable(CAP_SYS_ADMIN))
> >  		return -EBUSY;
> >  
> > -	tty->count++;
> > +	retval = tty_ldisc_lock(tty, 5 * HZ);
> 
> Why 5 secs? This would cause random errors on machines under heavy
> load.

Yeah, I think MAX_SCHEDULE_TIMEOUT will make more sense here..
Not sure, why I decided to go with 5*HZ instead.
Will resend with new timeout, if everything else looks good to you.
(having in mind my argument for count++ in 1/4)

> 
> > +	if (retval)
> > +		return retval;
> >  
> > +	tty->count++;
> >  	if (tty->ldisc)
> > -		return 0;
> > +		goto out_unlock;
> >  
> >  	retval = tty_ldisc_reinit(tty, tty->termios.c_line);
> >  	if (retval)
> >  		tty->count--;
> >  
> > +out_unlock:
> > +	tty_ldisc_unlock(tty);
> >  	return retval;
> 
> So what about:
>         tty_ldisc_lock(tty, MAX_SCHEDULE_TIMEOUT);
>         if (!tty->ldisc)
>                 ret = tty_ldisc_reinit(tty, tty->termios.c_line);
>         tty_ldisc_unlock(tty);
> 
>         if (!ret)
>                 tty->count++;
> 
>         return ret;
> 

-- 
Thanks,
             Dmitry

Re: [PATCH 2/4] tty: Hold tty_ldisc_lock() during tty_reopen()

[Benjamin Herrenschmidt]

On Wed, 2018-08-29 at 13:34 +0900, Sergey Senozhatsky wrote:
> Hi,
> 
> Cc-ing Benjamin on this.
> 
> On (08/29/18 03:23), Dmitry Safonov wrote:
> > BUG: unable to handle kernel paging request at 0000000000002260
> > IP: [..] n_tty_receive_buf_common+0x5f/0x86d
> > Workqueue: events_unbound flush_to_ldisc
> > Call Trace:
> >  [..] n_tty_receive_buf2
> >  [..] tty_ldisc_receive_buf
> >  [..] flush_to_ldisc
> >  [..] process_one_work
> >  [..] worker_thread
> >  [..] kthread
> >  [..] ret_from_fork
> 
> Seems that you are not the first one to hit this NULL deref.
> 
> > I think, tty_ldisc_reinit() should be called with ldisc_sem hold for
> > writing, which will protect any reader against line discipline changes.
> 
> Per https://lore.kernel.org/patchwork/patch/777220/
> 
> : Note that we noticed one path that called reinit without the ldisc lock
> : held for writing, we added that, but it didn't fix the problem.
> 
> And I guess that Ben meant the same reinit path which you patched:

This is too old for me to remember buit yes, there definitely was a bug
there...

> > @@ -1267,15 +1267,20 @@ static int tty_reopen(struct tty_struct *tty)
> >  	if (test_bit(TTY_EXCLUSIVE, &tty->flags) && !capable(CAP_SYS_ADMIN))
> >  		return -EBUSY;
> >  
> > -	tty->count++;
> > +	retval = tty_ldisc_lock(tty, 5 * HZ);
> > +	if (retval)
> > +		return retval;
> >  
> > +	tty->count++;
> >  	if (tty->ldisc)
> > -		return 0;
> > +		goto out_unlock;
> >  
> >  	retval = tty_ldisc_reinit(tty, tty->termios.c_line);
> >  	if (retval)
> >  		tty->count--;
> >  
> > +out_unlock:
> > +	tty_ldisc_unlock(tty);
> >  	return retval;
> >  }
> 
> 	-ss

Re: [PATCH 0/4] tty: Hold write ldisc sem in tty_reopen()

[Pasi Kärkkäinen]

Hi Dmitry,

On Wed, Aug 29, 2018 at 03:23:49AM +0100, Dmitry Safonov wrote:
> Two fixes for potential and real issues.
> Looks worth to have in stables as we've hit it on v4.9 stable.
> And for linux-next - adding lockdep asserts for line discipline changing
> code, verifying that write ldisc sem will be held forthwith.
> 
> I couldn't verify that holding write lock fixes the issue as we've hit
> it only once and I've failed in reproducing it.
> But searching in lkml, Cc'ing here people who probably had the same
> crash (and in hope someone of them could give tested-by):
> 

And thanks a lot for your work on fixing these issues!

I've added Nathan (and centos-virt) to CC, because earlier Nathan was able to reliably trigger ldisc related kernel crash in Xen dom0 when running Linux 4.9 kernel, which seems similar to what your patch 2/4 is trying to fix.

Nathan's kernel crash report: https://lists.centos.org/pipermail/centos-virt/2017-August/005610.html
Example ldisc kernel crash BUG in "n_tty_receive_buf_common": https://lists.centos.org/pipermail/centos-virt/attachments/20170823/45493276/attachment.txt

CentOS bug: https://bugs.centos.org/view.php?id=13713


Thanks,

-- Pasi

> Cc: Daniel Axtens <dja@axtens.net> 
> Cc: Dmitry Vyukov <dvyukov@google.com> 
> Cc: Michael Neuling <mikey@neuling.org>
> Cc: Mikulas Patocka <mpatocka@redhat.com>
> Cc: Pasi Kärkkäinen <pasik@iki.fi>
> Cc: Peter Hurley <peter@hurleysoftware.com>
> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> 
> Cc: Tan Xiaojun <tanxiaojun@huawei.com>
> (please, ignore if I Cc'ed you mistakenly)
> 
> Dmitry Safonov (4):
>   tty: Drop tty->count on tty_reopen() failure
>   tty: Hold tty_ldisc_lock() during tty_reopen()
>   tty: Lock tty pair in tty_init_dev()
>   tty/lockdep: Add ldisc_sem asserts
> 
>  drivers/tty/tty_io.c    | 21 +++++++++++++++------
>  drivers/tty/tty_ldisc.c | 12 ++++++++----
>  include/linux/tty.h     |  4 ++++
>  3 files changed, 27 insertions(+), 10 deletions(-)
> 
> -- 
> 2.13.6
> 

Re: [PATCH 1/4] tty: Drop tty->count on tty_reopen() failure

[Jiri Slaby]

On 08/29/2018, 06:13 PM, Dmitry Safonov wrote:
>> I would just do:
>>   if (!retval)
>>     tty->count++;
>> here. Nobody from ldiscs should rely on tty->count.
> 
> I thought about that and probably should have described in commit
> message why I haven't done that: I prefer to keep it as was as I did Cc
> stable tree - to keep the chance of regression to minimum.
> 
> I agree that your way is cleaner, but probably it may be done as
> cleanup on top for linux-next..

Agreed, so care to cook it up as 5/4 in this series :)?

thanks,
-- 
js
suse labs

Re: [PATCH 2/4] tty: Hold tty_ldisc_lock() during tty_reopen()

[Jiri Slaby]

On 08/29/2018, 05:19 PM, Tetsuo Handa wrote:
> On 2018/08/29 11:23, Dmitry Safonov wrote:
>> tty_ldisc_reinit() doesn't race with neither tty_ldisc_hangup()
>> nor set_ldisc() nor tty_ldisc_release() as they use tty lock.
>> But it races with anyone who expects line discipline to be the same
>> after hoding read semaphore in tty_ldisc_ref().
>>
>> We've seen the following crash on v4.9.108 stable:
>>
>> BUG: unable to handle kernel paging request at 0000000000002260
>> IP: [..] n_tty_receive_buf_common+0x5f/0x86d
>> Workqueue: events_unbound flush_to_ldisc
>> Call Trace:
>>  [..] n_tty_receive_buf2
>>  [..] tty_ldisc_receive_buf
>>  [..] flush_to_ldisc
>>  [..] process_one_work
>>  [..] worker_thread
>>  [..] kthread
>>  [..] ret_from_fork
>>
>> I think, tty_ldisc_reinit() should be called with ldisc_sem hold for
>> writing, which will protect any reader against line discipline changes.
>>
>> Note: I failed to reproduce the described crash, so obiviously can't
>> guarantee that this is the place where line discipline was switched.
> 
> This will be same with a report at
> https://syzkaller.appspot.com/bug?id=f08670354701fa64cc0dd3c0128a491bdb16adcc .
> 
> syzbot is now testing a patch from Jiri Slaby.

Yes, my patch passed, so could you add:
Reported-by: syzbot+3aa9784721dfb90e984d@syzkaller.appspotmail.com

(not adding tested-by as this particular patch was not tested, but
shoiuld work the same way.)

thanks,
-- 
js
suse labs

Re: [PATCH 3/4] tty: Lock tty pair in tty_init_dev()

[Jiri Slaby]

On 08/29/2018, 06:28 PM, Dmitry Safonov wrote:
> On Wed, 2018-08-29 at 16:46 +0200, Jiri Slaby wrote:
>> On 08/29/2018, 04:23 AM, Dmitry Safonov wrote:
>>> It's safe to not lock both here - done to silence attempt lockdep
>>> assert in
>>> tty_ldisc_open(), which will be added with following patch.
>>
>> SOrry, could you elaborate here? I don't follow...
> 
> Sure, 4/4 patch adds lockdep_assert_held() into tty_ldisc_open().
> Currently ldisc in tty->link isn't locked, which according to code
> shouldn't be an issue, as far as I can see.
> 
> So, this patch silences lockdep warining by holding the semaphore,
> which is slowpath anyway and doesn't case any new contention.

Eh, no... Adding a lock just to make lockdep happy is a no-go. The
locking in tty is already complex enough.

> (actually, not holding the semaphore for slave might be an issue if one
> opens slave before it's fully initialized, but I'm not sure if it's
> possible).

If that turns out to be a problem, we can apply the patch. BUt unless it
is proven to be so (be it code review or a reproducer), let's leave the
locking as it is.

thanks,
-- 
js
suse labs

Re: [PATCH 2/4] tty: Hold tty_ldisc_lock() during tty_reopen()

[Tetsuo Handa]

On 2018/08/31 15:51, Jiri Slaby wrote:
> On 08/29/2018, 05:19 PM, Tetsuo Handa wrote:
>> On 2018/08/29 11:23, Dmitry Safonov wrote:
>>> tty_ldisc_reinit() doesn't race with neither tty_ldisc_hangup()
>>> nor set_ldisc() nor tty_ldisc_release() as they use tty lock.
>>> But it races with anyone who expects line discipline to be the same
>>> after hoding read semaphore in tty_ldisc_ref().
>>>
>>> We've seen the following crash on v4.9.108 stable:
>>>
>>> BUG: unable to handle kernel paging request at 0000000000002260
>>> IP: [..] n_tty_receive_buf_common+0x5f/0x86d
>>> Workqueue: events_unbound flush_to_ldisc
>>> Call Trace:
>>>  [..] n_tty_receive_buf2
>>>  [..] tty_ldisc_receive_buf
>>>  [..] flush_to_ldisc
>>>  [..] process_one_work
>>>  [..] worker_thread
>>>  [..] kthread
>>>  [..] ret_from_fork
>>>
>>> I think, tty_ldisc_reinit() should be called with ldisc_sem hold for
>>> writing, which will protect any reader against line discipline changes.
>>>
>>> Note: I failed to reproduce the described crash, so obiviously can't
>>> guarantee that this is the place where line discipline was switched.
>>
>> This will be same with a report at
>> https://syzkaller.appspot.com/bug?id=f08670354701fa64cc0dd3c0128a491bdb16adcc .
>>
>> syzbot is now testing a patch from Jiri Slaby.
> 
> Yes, my patch passed, so could you add:
> Reported-by: syzbot+3aa9784721dfb90e984d@syzkaller.appspotmail.com
> 
> (not adding tested-by as this particular patch was not tested, but
> shoiuld work the same way.)
> 
> thanks,
> 

Tested with all 4 patches applied using syzbot-provided reproducer and
my simplified reproducer. No crashes and no lockdep warnings.
Also, noisy messages like

  pts pts4033: tty_release: tty->count(10529) != (#fd's(7) + #kopen's(0))

are gone. Very nice. Thank you.

Re: [PATCH 2/4] tty: Hold tty_ldisc_lock() during tty_reopen()

[Jiri Slaby]

On 08/31/2018, 01:17 PM, Tetsuo Handa wrote:
> Also, noisy messages like
> 
>   pts pts4033: tty_release: tty->count(10529) != (#fd's(7) + #kopen's(0))
> 
> are gone.

fwiw, thanks to 1/4…

Dmitry, could you note the message above to the commit log of 1/4, so
that we know the patch fixed that and downstream can pick it up...

-- 
js
suse labs

Re: [PATCH 1/4] tty: Drop tty->count on tty_reopen() failure

[Dmitry Safonov]

On Fri, 2018-08-31 at 08:47 +0200, Jiri Slaby wrote:
> On 08/29/2018, 06:13 PM, Dmitry Safonov wrote:
> > > I would just do:
> > >   if (!retval)
> > >     tty->count++;
> > > here. Nobody from ldiscs should rely on tty->count.
> > 
> > I thought about that and probably should have described in commit
> > message why I haven't done that: I prefer to keep it as was as I
> > did Cc
> > stable tree - to keep the chance of regression to minimum.
> > 
> > I agree that your way is cleaner, but probably it may be done as
> > cleanup on top for linux-next..
> 
> Agreed, so care to cook it up as 5/4 in this series :)?

Sure, will resend v2 with that and all tested-by.

-- 
Thanks,
             Dmitry

Re: [PATCH 2/4] tty: Hold tty_ldisc_lock() during tty_reopen()

[Dmitry Safonov]

On Fri, 2018-08-31 at 13:21 +0200, Jiri Slaby wrote:
> On 08/31/2018, 01:17 PM, Tetsuo Handa wrote:
> > Also, noisy messages like
> > 
> >   pts pts4033: tty_release: tty->count(10529) != (#fd's(7) +
> > #kopen's(0))
> > 
> > are gone.
> 
> fwiw, thanks to 1/4…
> 
> Dmitry, could you note the message above to the commit log of 1/4, so
> that we know the patch fixed that and downstream can pick it up...
> 

Sure, will do.

-- 
Thanks,
             Dmitry

Re: [PATCH 3/4] tty: Lock tty pair in tty_init_dev()

[Dmitry Safonov]

On Fri, 2018-08-31 at 08:54 +0200, Jiri Slaby wrote:
> On 08/29/2018, 06:28 PM, Dmitry Safonov wrote:
> > On Wed, 2018-08-29 at 16:46 +0200, Jiri Slaby wrote:
> > > On 08/29/2018, 04:23 AM, Dmitry Safonov wrote:
> > > > It's safe to not lock both here - done to silence attempt
> > > > lockdep
> > > > assert in
> > > > tty_ldisc_open(), which will be added with following patch.
> > > 
> > > SOrry, could you elaborate here? I don't follow...
> > 
> > Sure, 4/4 patch adds lockdep_assert_held() into tty_ldisc_open().
> > Currently ldisc in tty->link isn't locked, which according to code
> > shouldn't be an issue, as far as I can see.
> > 
> > So, this patch silences lockdep warining by holding the semaphore,
> > which is slowpath anyway and doesn't case any new contention.
> 
> Eh, no... Adding a lock just to make lockdep happy is a no-go. The
> locking in tty is already complex enough.
> 
> > (actually, not holding the semaphore for slave might be an issue if
> > one
> > opens slave before it's fully initialized, but I'm not sure if it's
> > possible).
> 
> If that turns out to be a problem, we can apply the patch. BUt unless
> it
> is proven to be so (be it code review or a reproducer), let's leave
> the
> locking as it is.

Ok, than for v2 I'll just remove lockdep_assert() from
tty_ldisc_open().

-- 
Thanks,
             Dmitry

[LKP] [tty] 0b4f83d510: INFO:task_blocked_for_more_than#seconds

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 8238 bytes --]

FYI, we noticed the following commit (built with gcc-7):

commit: 0b4f83d510f6fef6bb9da25f122c8d733d50516f ("[PATCH 2/4] tty: Hold tty_ldisc_lock() during tty_reopen()")
url: https://github.com/0day-ci/linux/commits/Dmitry-Safonov/tty-Hold-write-ldisc-sem-in-tty_reopen/20180829-165618
base: https://git.kernel.org/cgit/linux/kernel/git/gregkh/tty.git tty-testing

in testcase: trinity
with following parameters:

	runtime: 300s

test-description: Trinity is a linux system call fuzz tester.
test-url: http://codemonkey.org.uk/projects/trinity/


on test machine: qemu-system-x86_64 -enable-kvm -m 256M

caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):


+--------------------------------------------------+------------+------------+
|                                                  | 58dd163974 | 0b4f83d510 |
+--------------------------------------------------+------------+------------+
| boot_successes                                   | 14         | 4          |
| boot_failures                                    | 0          | 6          |
| INFO:task_blocked_for_more_than#seconds          | 0          | 6          |
| Kernel_panic-not_syncing:hung_task:blocked_tasks | 0          | 6          |
+--------------------------------------------------+------------+------------+



[  244.816801] INFO: task validate_data:655 blocked for more than 120 seconds.
[  244.818833]       Not tainted 4.18.0-11684-g0b4f83d #1
[  244.820028] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  244.826965] validate_data   D    0   655    623 0x20020000
[  244.828279] Call Trace:
[  244.828958]  ? __schedule+0x843/0x950
[  244.830173]  ? __ldsem_down_read_nested+0x1c4/0x3b0
[  244.834903]  schedule+0x31/0x70
[  244.835665]  schedule_timeout+0x34/0x760
[  244.836613]  ? ftrace_likely_update+0x35/0x60
[  244.837683]  ? __ldsem_down_read_nested+0x1c4/0x3b0
[  244.838818]  ? ftrace_likely_update+0x35/0x60
[  244.840127]  ? ftrace_likely_update+0x35/0x60
[  244.845947]  ? __ldsem_down_read_nested+0x1c4/0x3b0
[  244.847882]  __ldsem_down_read_nested+0x23a/0x3b0
[  244.849886]  ? tty_ldisc_ref_wait+0x25/0x50
[  244.853807]  tty_ldisc_ref_wait+0x25/0x50
[  244.854946]  tty_compat_ioctl+0x8a/0x120
[  244.855928]  ? this_tty+0x80/0x80
[  244.856742]  __ia32_compat_sys_ioctl+0xc28/0x1ce0
[  244.857981]  do_int80_syscall_32+0x1d2/0x5f0
[  244.859003]  entry_INT80_compat+0x88/0xa0
[  244.859972] INFO: task dnsmasq:668 blocked for more than 120 seconds.
[  244.868315]       Not tainted 4.18.0-11684-g0b4f83d #1
[  244.869583] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  244.871744] dnsmasq         D    0   668      1 0x20020000
[  244.873063] Call Trace:
[  244.873697]  ? __schedule+0x843/0x950
[  244.874572]  ? __ldsem_down_read_nested+0x1c4/0x3b0
[  244.875725]  schedule+0x31/0x70
[  244.876576]  schedule_timeout+0x34/0x760
[  244.877573]  ? ftrace_likely_update+0x35/0x60
[  244.878660]  ? __ldsem_down_read_nested+0x1c4/0x3b0
[  244.879872]  ? ftrace_likely_update+0x35/0x60
[  244.890522]  ? ftrace_likely_update+0x35/0x60
[  244.891572]  ? __ldsem_down_read_nested+0x1c4/0x3b0
[  244.892746]  __ldsem_down_read_nested+0x23a/0x3b0
[  244.893861]  ? tty_ldisc_ref_wait+0x25/0x50
[  244.894841]  tty_ldisc_ref_wait+0x25/0x50
[  244.895911]  tty_compat_ioctl+0x8a/0x120
[  244.896916]  ? this_tty+0x80/0x80
[  244.897717]  __ia32_compat_sys_ioctl+0xc28/0x1ce0
[  244.898821]  do_int80_syscall_32+0x1d2/0x5f0
[  244.899830]  entry_INT80_compat+0x88/0xa0
[  244.909466] INFO: task dropbear:734 blocked for more than 120 seconds.
[  244.911173]       Not tainted 4.18.0-11684-g0b4f83d #1
[  244.912394] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  244.914176] dropbear        D    0   734      1 0x20020000
[  244.915446] Call Trace:
[  244.916068]  ? __schedule+0x843/0x950
[  244.916945]  ? __ldsem_down_read_nested+0x1c4/0x3b0
[  244.918076]  schedule+0x31/0x70
[  244.918832]  schedule_timeout+0x34/0x760
[  244.919781]  ? ftrace_likely_update+0x35/0x60
[  244.921104]  ? __ldsem_down_read_nested+0x1c4/0x3b0
[  244.922304]  ? ftrace_likely_update+0x35/0x60
[  244.923347]  ? ftrace_likely_update+0x35/0x60
[  244.924369]  ? __ldsem_down_read_nested+0x1c4/0x3b0
[  244.925496]  __ldsem_down_read_nested+0x23a/0x3b0
[  244.926598]  ? tty_ldisc_ref_wait+0x25/0x50
[  244.927578]  tty_ldisc_ref_wait+0x25/0x50
[  244.928526]  tty_compat_ioctl+0x8a/0x120
[  244.929449]  ? this_tty+0x80/0x80
[  244.930240]  __ia32_compat_sys_ioctl+0xc28/0x1ce0
[  244.940083]  do_int80_syscall_32+0x1d2/0x5f0
[  244.941310]  entry_INT80_compat+0x88/0xa0
[  244.944070] 
[  244.944070] Showing all locks held in the system:
[  244.945558] 1 lock held by khungtaskd/18:
[  244.946495]  #0: (____ptrval____) (rcu_read_lock){....}, at: debug_show_all_locks+0x16/0x190
[  244.948503] 2 locks held by askfirst/235:
[  244.949439]  #0: (____ptrval____) (&tty->ldisc_sem){++++}, at: tty_ldisc_ref_wait+0x25/0x50
[  244.951762]  #1: (____ptrval____) (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0x13d/0xa00
[  244.953799] 1 lock held by validate_data/655:
[  244.954814]  #0: (____ptrval____) (&tty->ldisc_sem){++++}, at: tty_ldisc_ref_wait+0x25/0x50
[  244.956764] 1 lock held by dnsmasq/668:
[  244.957649]  #0: (____ptrval____) (&tty->ldisc_sem){++++}, at: tty_ldisc_ref_wait+0x25/0x50
[  244.959598] 1 lock held by dropbear/734:
[  244.967564]  #0: (____ptrval____) (&tty->ldisc_sem){++++}, at: tty_ldisc_ref_wait+0x25/0x50
[  244.969581] 
[  244.969975] =============================================
[  244.969975] 
[  244.971833] NMI backtrace for cpu 0
[  244.972696] CPU: 0 PID: 18 Comm: khungtaskd Not tainted 4.18.0-11684-g0b4f83d #1
[  244.974371] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[  244.976260] Call Trace:
[  244.976895]  dump_stack+0xb9/0x10e
[  244.977723]  ? lapic_can_unplug_cpu+0xa0/0xa0
[  244.978735]  nmi_cpu_backtrace+0x13a/0x150
[  244.979697]  ? lapic_can_unplug_cpu+0xa0/0xa0
[  244.980713]  nmi_trigger_cpumask_backtrace+0x188/0x280
[  244.981899]  watchdog+0x83b/0x880
[  244.982683]  ? reset_hung_task_detector+0x20/0x20
[  244.983762]  kthread+0x170/0x180
[  244.984509]  ? kthread_create_worker_on_cpu+0x70/0x70
[  244.985659]  ret_from_fork+0x24/0x30
[  244.990807] Kernel panic - not syncing: hung_task: blocked tasks
[  244.992205] CPU: 0 PID: 18 Comm: khungtaskd Not tainted 4.18.0-11684-g0b4f83d #1
[  244.993881] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[  244.995769] Call Trace:
[  244.996362]  dump_stack+0xb9/0x10e
[  244.997166]  panic+0xfd/0x2bb
[  244.997878]  ? nmi_trigger_cpumask_backtrace+0x269/0x280
[  244.999097]  ? watchdog+0x83b/0x880
[  244.999982]  watchdog+0x847/0x880
[  245.000782]  ? reset_hung_task_detector+0x20/0x20
[  245.001862]  kthread+0x170/0x180
[  245.002613]  ? kthread_create_worker_on_cpu+0x70/0x70
[  245.003785]  ret_from_fork+0x24/0x30
[  245.004646] Kernel Offset: 0x10800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[  245.007065] Rebooting in 3 seconds..

Elapsed time: 250

#!/bin/bash

# To reproduce,
# 1) save job-script and this script (both are attached in 0day report email)
# 2) run this script with your compiled kernel and optional env $INSTALL_MOD_PATH

kernel=$1

initrds=(
	/osimage/openwrt/openwrt-i386-2016-03-16.cgz
	/lkp/lkp/lkp-i386.cgz
	/osimage/pkg/debian-x86_64-2016-08-31.cgz/trinity-static-i386-x86_64-6ddabfd2_2017-11-10.cgz
)

HTTP_PREFIX=https://download.01.org/0day-ci/lkp-qemu
wget --timestamping "${initrds[@]/#/$HTTP_PREFIX}"

{
	cat "${initrds[@]//*\//}"
	[[ $INSTALL_MOD_PATH ]] && (
		cd "$INSTALL_MOD_PATH"
		find lib | cpio -o -H newc --quiet | gzip
	)
	echo  job-script | cpio -o -H newc --quiet | gzip
} > initrd.img

qemu-img create -f qcow2 disk-vm-lkp-hsw-4ep1-openwrt-ia32-13-0 256G
qemu-img create -f qcow2 disk-vm-lkp-hsw-4ep1-openwrt-ia32-13-1 256G

kvm=(
	qemu-system-x86_64


To reproduce:

        git clone https://github.com/intel/lkp-tests.git
        cd lkp-tests
        bin/lkp qemu -k <bzImage> job-script # job-script is attached in this email



Thanks,
Rong, Chen

[-- Attachment #2: config-4.18.0-11684-g0b4f83d --]
[-- Type: text/plain, Size: 87319 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 4.18.0 Kernel Configuration
#

#
# Compiler: gcc-7 (Debian 7.3.0-1) 7.3.0
#
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=70300
CONFIG_CLANG_VERSION=0
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_FAST_NO_HZ=y
# CONFIG_RCU_BOOST is not set
CONFIG_RCU_NOCB_CPU=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
# CONFIG_NUMA_BALANCING is not set
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_HUGETLB is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_NAMESPACES is not set
CONFIG_CHECKPOINT_RESTORE=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_FHANDLE=y
# CONFIG_POSIX_TIMERS is not set
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_USERFAULTFD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
# CONFIG_RSEQ is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PC104=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_SLAB_MERGE_DEFAULT is not set
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
# CONFIG_ZONE_DMA is not set
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
# CONFIG_X86_MPPARSE is not set
# CONFIG_GOLDFISH is not set
# CONFIG_RETPOLINE is not set
# CONFIG_INTEL_RDT is not set
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_NUMACHIP=y
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_QUEUED_LOCK_STAT=y
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_JAILHOUSE_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
# CONFIG_CALGARY_IOMMU is not set
CONFIG_MAXSMP=y
CONFIG_NR_CPUS_RANGE_BEGIN=8192
CONFIG_NR_CPUS_RANGE_END=8192
CONFIG_NR_CPUS_DEFAULT=8192
CONFIG_NR_CPUS=8192
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_SCHED_MC_PRIO is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
# CONFIG_X86_MCE is not set

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=m
# CONFIG_PERF_EVENTS_INTEL_CSTATE is not set
CONFIG_PERF_EVENTS_AMD_POWER=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_I8K=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=m
# CONFIG_X86_5LEVEL is not set
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
# CONFIG_AMD_MEM_ENCRYPT is not set
CONFIG_NUMA=y
# CONFIG_AMD_NUMA is not set
# CONFIG_X86_64_ACPI_NUMA is not set
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MTRR is not set
# CONFIG_ARCH_RANDOM is not set
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_UMIP is not set
CONFIG_X86_INTEL_MPX=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_EFI_MIXED is not set
CONFIG_SECCOMP=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_KEXEC_FILE is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_DYNAMIC_MEMORY_LAYOUT=y
CONFIG_RANDOMIZE_MEMORY=y
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0x0
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
CONFIG_COMPAT_VDSO=y
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set
CONFIG_HAVE_LIVEPATCH=y
CONFIG_LIVEPATCH=y
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_SUSPEND_SKIP_SYNC=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_AUTOSLEEP=y
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ACPI=y
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
# CONFIG_ACPI_SPCR_TABLE is not set
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_TAD=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR_CSTATE=y
# CONFIG_ACPI_PROCESSOR is not set
CONFIG_ACPI_IPMI=m
# CONFIG_ACPI_NUMA is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
# CONFIG_ACPI_CONTAINER is not set
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=y
CONFIG_ACPI_HED=m
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
CONFIG_DPTF_POWER=m
CONFIG_PMIC_OPREGION=y
# CONFIG_CHT_DC_TI_PMIC_OPREGION is not set
CONFIG_ACPI_CONFIGFS=y
# CONFIG_TPS68470_PMIC_OPREGION is not set
CONFIG_X86_PM_TIMER=y
CONFIG_SFI=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set

#
# CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
CONFIG_X86_P4_CLOCKMOD=m

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_INTEL_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_MMCONF_FAM10H=y
CONFIG_PCI_CNB20LE_QUIRK=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_STUB=y
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_PRI=y
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
# CONFIG_HOTPLUG_PCI is not set

#
# PCI controller drivers
#

#
# Cadence PCIe controllers support
#

#
# DesignWare PCI Core Support
#

#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
CONFIG_PCI_EPF_TEST=m

#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=y
CONFIG_ISA_BUS=y
# CONFIG_ISA_DMA_API is not set
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
# CONFIG_RAPIDIO_DMA_ENGINE is not set
CONFIG_RAPIDIO_DEBUG=y
CONFIG_RAPIDIO_ENUM_BASIC=m
CONFIG_RAPIDIO_CHMAN=y
CONFIG_RAPIDIO_MPORT_CDEV=y

#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_TSI57X=m
CONFIG_RAPIDIO_CPS_XX=m
CONFIG_RAPIDIO_TSI568=m
CONFIG_RAPIDIO_CPS_GEN2=m
CONFIG_RAPIDIO_RXS_GEN3=m
# CONFIG_X86_SYSFB is not set

#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_HAVE_GENERIC_GUP=y

#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=y
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT_FIND is not set
CONFIG_FW_CFG_SYSFS=m
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
# CONFIG_EFI_VARS is not set
CONFIG_EFI_ESRT=y
CONFIG_EFI_FAKE_MEMMAP=y
CONFIG_EFI_MAX_FAKE_MEM=8
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_CAPSULE_LOADER=y
CONFIG_EFI_TEST=y
# CONFIG_APPLE_PROPERTIES is not set
CONFIG_RESET_ATTACK_MITIGATION=y

#
# Tegra firmware driver
#
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_HOTPLUG_SMT=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
CONFIG_STATIC_KEYS_SELFTEST=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
# CONFIG_STACKPROTECTOR is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_ISA_BUS_API=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
# CONFIG_VMAP_STACK is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_REFCOUNT=y
# CONFIG_REFCOUNT_FULL is not set
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_PLUGIN_HOSTCC="g++"
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
CONFIG_MODULES_TREE_LOOKUP=y
# CONFIG_BLOCK is not set
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
# CONFIG_COREDUMP is not set

#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
# CONFIG_BALLOON_COMPACTION is not set
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_CLEANCACHE=y
# CONFIG_CMA is not set
CONFIG_MEM_SOFT_DIRTY=y
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
CONFIG_ZSMALLOC=m
CONFIG_PGTABLE_MAPPING=y
CONFIG_ZSMALLOC_STAT=y
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_ZONE_DEVICE=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_NET=y

#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
# CONFIG_FAILOVER is not set
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_TEST_ASYNC_DRIVER_PROBE=m
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_W1=m
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set

#
# Bus devices
#
# CONFIG_CONNECTOR is not set
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_AX88796=m
# CONFIG_PARPORT_1284 is not set
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y

#
# NVME Support
#

#
# Misc devices
#
CONFIG_AD525X_DPOT=m
# CONFIG_AD525X_DPOT_I2C is not set
CONFIG_AD525X_DPOT_SPI=m
# CONFIG_DUMMY_IRQ is not set
CONFIG_IBM_ASM=y
CONFIG_PHANTOM=y
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_SGI_XP is not set
CONFIG_HP_ILO=y
# CONFIG_SGI_GRU is not set
# CONFIG_APDS9802ALS is not set
CONFIG_ISL29003=m
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=y
CONFIG_DS1682=m
# CONFIG_VMWARE_BALLOON is not set
CONFIG_USB_SWITCH_FSA9480=m
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
CONFIG_PCI_ENDPOINT_TEST=y
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=m

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=m
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_93XX46 is not set
CONFIG_EEPROM_IDT_89HPESX=y
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_I2C is not set
CONFIG_ALTERA_STAPL=y
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
# CONFIG_INTEL_MEI_TXE is not set
CONFIG_VMWARE_VMCI=y

#
# Intel MIC & related support
#

#
# Intel MIC Bus Driver
#
CONFIG_INTEL_MIC_BUS=m

#
# SCIF Bus Driver
#
CONFIG_SCIF_BUS=y

#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#
CONFIG_SCIF=m

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
CONFIG_MIC_COSM=m

#
# VOP Driver
#
CONFIG_GENWQE=y
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
CONFIG_ECHO=y
# CONFIG_MISC_RTSX_PCI is not set
CONFIG_HAVE_IDE=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=m
# CONFIG_FIREWIRE_NET is not set
CONFIG_FIREWIRE_NOSY=m
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NTB_NETDEV is not set
# CONFIG_RIONET is not set
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
# CONFIG_VIRTIO_NET is not set
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_MDIO=m
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD_XGBE is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
CONFIG_NET_VENDOR_AURORA=y
# CONFIG_AURORA_NB8800 is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
CONFIG_CAVIUM_PTP=y
# CONFIG_LIQUIDIO is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=m
CONFIG_E1000E_HWTS=y
CONFIG_IGB=m
CONFIG_IGB_HWMON=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
CONFIG_IXGBE=m
CONFIG_IXGBE_HWMON=y
# CONFIG_I40E is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_NI=y
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_ALE is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_MDIO_DEVICE is not set
# CONFIG_PHYLIB is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K_PCI is not set
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_WLAN_VENDOR_QUANTENNA=y

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_HYPERV_NET is not set
# CONFIG_NETDEVSIM is not set
# CONFIG_NET_FAILOVER is not set
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=m
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5520 is not set
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_HANWANG is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_PEGASUS is not set
CONFIG_TABLET_SERIAL_WACOM4=m
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=y
# CONFIG_RMI4_I2C is not set
# CONFIG_RMI4_SPI is not set
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
# CONFIG_RMI4_F34 is not set
# CONFIG_RMI4_F55 is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
CONFIG_HYPERV_KEYBOARD=m
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
CONFIG_CYZ_INTR=y
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=y
CONFIG_SYNCLINKMP=y
CONFIG_SYNCLINK_GT=y
CONFIG_NOZOMI=y
CONFIG_ISI=y
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
CONFIG_TRACE_ROUTER=m
CONFIG_TRACE_SINK=m
# CONFIG_DEVMEM is not set
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_EXAR=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_LPSS is not set
CONFIG_SERIAL_8250_MID=m
CONFIG_SERIAL_8250_MOXA=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_MAX310X=y
CONFIG_SERIAL_UARTLITE=m
CONFIG_SERIAL_UARTLITE_NR_UARTS=1
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SCCNXP is not set
CONFIG_SERIAL_SC16IS7XX_CORE=y
CONFIG_SERIAL_SC16IS7XX=y
# CONFIG_SERIAL_SC16IS7XX_I2C is not set
CONFIG_SERIAL_SC16IS7XX_SPI=y
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ALTERA_UART_CONSOLE=y
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_ARC is not set
CONFIG_SERIAL_RP2=m
CONFIG_SERIAL_RP2_NR_UARTS=32
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
# CONFIG_IPMI_POWEROFF is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_NVRAM is not set
CONFIG_R3964=m
CONFIG_APPLICOM=y
CONFIG_MWAVE=m
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=m
# CONFIG_UV_MMTIMER is not set
CONFIG_TCG_TPM=m
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=m
CONFIG_TCG_TIS=m
CONFIG_TCG_TIS_SPI=m
CONFIG_TCG_TIS_I2C_ATMEL=m
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
# CONFIG_TCG_NSC is not set
# CONFIG_TCG_ATMEL is not set
# CONFIG_TCG_INFINEON is not set
CONFIG_TCG_CRB=m
CONFIG_TCG_VTPM_PROXY=m
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
# CONFIG_RANDOM_TRUST_CPU is not set

#
# I2C support
#
CONFIG_I2C=y
# CONFIG_ACPI_I2C_OPREGION is not set
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_MUX is not set
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_CBUS_GPIO=y
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_DESIGNWARE_SLAVE=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
CONFIG_I2C_EMEV2=y
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_SIMTEC is not set
CONFIG_I2C_XILINX=y

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_TAOS_EVM=y

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
CONFIG_I2C_STUB=m
CONFIG_I2C_SLAVE=y
# CONFIG_I2C_SLAVE_EEPROM is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=m
# CONFIG_SPI_AXI_SPI_ENGINE is not set
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_CADENCE=m
CONFIG_SPI_DESIGNWARE=m
CONFIG_SPI_DW_PCI=m
CONFIG_SPI_DW_MMIO=m
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_LM70_LLP=m
CONFIG_SPI_OC_TINY=y
# CONFIG_SPI_PXA2XX is not set
CONFIG_SPI_ROCKCHIP=y
CONFIG_SPI_SC18IS602=m
CONFIG_SPI_XCOMM=m
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set

#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
CONFIG_SPI_LOOPBACK_TEST=m
# CONFIG_SPI_TLE62X0 is not set
CONFIG_SPI_SLAVE=y
# CONFIG_SPI_SLAVE_TIME is not set
CONFIG_SPI_SLAVE_SYSTEM_CONTROL=m
CONFIG_SPMI=y
# CONFIG_HSI is not set
# CONFIG_PPS is not set

#
# PTP clock support
#

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_AMD=y
# CONFIG_PINCTRL_MCP23S08 is not set
CONFIG_PINCTRL_SX150X=y
CONFIG_PINCTRL_BAYTRAIL=y
CONFIG_PINCTRL_CHERRYVIEW=y
CONFIG_PINCTRL_INTEL=y
# CONFIG_PINCTRL_BROXTON is not set
CONFIG_PINCTRL_CANNONLAKE=m
CONFIG_PINCTRL_CEDARFORK=y
# CONFIG_PINCTRL_DENVERTON is not set
CONFIG_PINCTRL_GEMINILAKE=m
CONFIG_PINCTRL_ICELAKE=y
# CONFIG_PINCTRL_LEWISBURG is not set
CONFIG_PINCTRL_SUNRISEPOINT=y
CONFIG_PINCTRL_MADERA=m
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
# CONFIG_GPIO_SYSFS is not set
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
CONFIG_GPIO_DWAPB=y
# CONFIG_GPIO_EXAR is not set
CONFIG_GPIO_GENERIC_PLATFORM=m
CONFIG_GPIO_ICH=m
# CONFIG_GPIO_LYNXPOINT is not set
CONFIG_GPIO_MB86S7X=m
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VX855 is not set

#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_104_DIO_48E=m
CONFIG_GPIO_104_IDIO_16=m
CONFIG_GPIO_104_IDI_48=y
CONFIG_GPIO_F7188X=m
CONFIG_GPIO_GPIO_MM=m
CONFIG_GPIO_IT87=m
CONFIG_GPIO_SCH=y
CONFIG_GPIO_SCH311X=y
CONFIG_GPIO_WINBOND=y
CONFIG_GPIO_WS16C48=m

#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=y
# CONFIG_GPIO_ADP5588_IRQ is not set
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=m
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TPIC2810=m

#
# MFD GPIO expanders
#
CONFIG_GPIO_ADP5520=m
# CONFIG_GPIO_ARIZONA is not set
CONFIG_GPIO_BD9571MWV=y
CONFIG_GPIO_DA9052=m
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_JANZ_TTL=m
# CONFIG_GPIO_LP3943 is not set
CONFIG_GPIO_MADERA=m
# CONFIG_GPIO_PALMAS is not set
CONFIG_GPIO_TPS65912=y
CONFIG_GPIO_TPS68470=y
CONFIG_GPIO_WM8350=m
CONFIG_GPIO_WM8994=m

#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=y
CONFIG_GPIO_BT8XX=m
CONFIG_GPIO_ML_IOH=m
CONFIG_GPIO_PCI_IDIO_16=y
CONFIG_GPIO_PCIE_IDIO_24=m
CONFIG_GPIO_RDC321X=y

#
# SPI GPIO expanders
#
CONFIG_GPIO_MAX3191X=m
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MC33880=y
# CONFIG_GPIO_PISOSR is not set
CONFIG_GPIO_XRA1403=m
CONFIG_W1=y

#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=m

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
# CONFIG_W1_SLAVE_SMEM is not set
CONFIG_W1_SLAVE_DS2405=y
CONFIG_W1_SLAVE_DS2408=m
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2805 is not set
CONFIG_W1_SLAVE_DS2431=y
# CONFIG_W1_SLAVE_DS2433 is not set
# CONFIG_W1_SLAVE_DS2438 is not set
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
CONFIG_W1_SLAVE_DS28E04=y
# CONFIG_W1_SLAVE_DS28E17 is not set
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=y
# CONFIG_MAX8925_POWER is not set
CONFIG_WM8350_POWER=y
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_88PM860X is not set
CONFIG_CHARGER_ADP5061=y
# CONFIG_BATTERY_DS2760 is not set
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_SBS=m
CONFIG_CHARGER_SBS=y
CONFIG_BATTERY_BQ27XXX=y
CONFIG_BATTERY_BQ27XXX_I2C=y
CONFIG_BATTERY_BQ27XXX_HDQ=y
# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set
CONFIG_BATTERY_DA9052=y
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_BATTERY_MAX1721X=m
# CONFIG_CHARGER_PCF50633 is not set
CONFIG_CHARGER_MAX8903=y
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
CONFIG_CHARGER_MANAGER=y
# CONFIG_CHARGER_LTC3651 is not set
CONFIG_CHARGER_MAX14577=y
CONFIG_CHARGER_MAX77693=m
CONFIG_CHARGER_BQ2415X=m
# CONFIG_CHARGER_BQ24190 is not set
CONFIG_CHARGER_BQ24257=y
CONFIG_CHARGER_BQ24735=m
CONFIG_CHARGER_BQ25890=m
CONFIG_CHARGER_SMB347=y
CONFIG_BATTERY_GAUGE_LTC2941=m
# CONFIG_CHARGER_RT9455 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7314=m
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=y
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=y
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=m
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=y
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=y
# CONFIG_SENSORS_ASPEED is not set
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=y
CONFIG_SENSORS_DA9052_ADC=m
CONFIG_SENSORS_DA9055=y
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
CONFIG_SENSORS_G762=y
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_I5500=m
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
CONFIG_SENSORS_POWR1220=y
# CONFIG_SENSORS_LINEAGE is not set
CONFIG_SENSORS_LTC2945=y
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC4151=y
CONFIG_SENSORS_LTC4215=m
CONFIG_SENSORS_LTC4222=m
# CONFIG_SENSORS_LTC4245 is not set
CONFIG_SENSORS_LTC4260=y
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX1111=y
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=y
CONFIG_SENSORS_MAX31722=m
CONFIG_SENSORS_MAX6621=m
CONFIG_SENSORS_MAX6639=y
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
# CONFIG_SENSORS_MAX6697 is not set
CONFIG_SENSORS_MAX31790=y
# CONFIG_SENSORS_MCP3021 is not set
CONFIG_SENSORS_TC654=m
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
# CONFIG_SENSORS_LM78 is not set
CONFIG_SENSORS_LM80=y
# CONFIG_SENSORS_LM83 is not set
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_LM92=y
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_NTC_THERMISTOR=m
CONFIG_SENSORS_NCT6683=m
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
CONFIG_SENSORS_NPCM7XX=y
CONFIG_SENSORS_PCF8591=y
CONFIG_PMBUS=y
CONFIG_SENSORS_PMBUS=y
# CONFIG_SENSORS_ADM1275 is not set
CONFIG_SENSORS_IBM_CFFPS=y
# CONFIG_SENSORS_IR35221 is not set
CONFIG_SENSORS_LM25066=y
# CONFIG_SENSORS_LTC2978 is not set
# CONFIG_SENSORS_LTC3815 is not set
CONFIG_SENSORS_MAX16064=y
CONFIG_SENSORS_MAX20751=m
# CONFIG_SENSORS_MAX31785 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_TPS40422=y
CONFIG_SENSORS_TPS53679=m
CONFIG_SENSORS_UCD9000=m
# CONFIG_SENSORS_UCD9200 is not set
CONFIG_SENSORS_ZL6100=m
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=y
# CONFIG_SENSORS_SHT3x is not set
CONFIG_SENSORS_SHTC1=m
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC6W201=y
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_STTS751 is not set
CONFIG_SENSORS_SMM665=y
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS1015=y
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_ADS7871 is not set
# CONFIG_SENSORS_AMC6821 is not set
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=y
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_TMP102=m
CONFIG_SENSORS_TMP103=y
CONFIG_SENSORS_TMP108=m
CONFIG_SENSORS_TMP401=m
# CONFIG_SENSORS_TMP421 is not set
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=m
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
CONFIG_SENSORS_W83795_FANCTRL=y
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_WM8350 is not set

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=y
CONFIG_SENSORS_ATK0110=y
CONFIG_THERMAL=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
# CONFIG_THERMAL_HWMON is not set
CONFIG_THERMAL_WRITABLE_TRIPS=y
# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR=y
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
CONFIG_CLOCK_THERMAL=y
# CONFIG_DEVFREQ_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_INTEL_SOC_DTS_IOSF_CORE=y
CONFIG_INTEL_SOC_DTS_THERMAL=m

#
# ACPI INT340X thermal drivers
#
CONFIG_INT340X_THERMAL=y
CONFIG_ACPI_THERMAL_REL=y
CONFIG_INT3406_THERMAL=y
CONFIG_INTEL_PCH_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_AS3711=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_BCM590XX=m
CONFIG_MFD_BD9571MWV=y
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
CONFIG_MFD_MADERA=m
CONFIG_MFD_MADERA_I2C=m
CONFIG_MFD_MADERA_SPI=m
# CONFIG_MFD_CS47L35 is not set
# CONFIG_MFD_CS47L85 is not set
# CONFIG_MFD_CS47L90 is not set
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=y
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_INTEL_SOC_PMIC_CHTWC is not set
CONFIG_INTEL_SOC_PMIC_CHTDC_TI=m
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
CONFIG_MFD_INTEL_LPSS_PCI=m
CONFIG_MFD_JANZ_CMODIO=m
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
CONFIG_MFD_88PM805=m
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77693=y
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
CONFIG_EZX_PCAP=y
CONFIG_MFD_RETU=m
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=m
CONFIG_MFD_RDC321X=y
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
CONFIG_MFD_SI476X_CORE=y
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SKY81452 is not set
CONFIG_MFD_SMSC=y
CONFIG_ABX500_CORE=y
CONFIG_AB3100_CORE=y
CONFIG_AB3100_OTP=y
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
CONFIG_MFD_LP3943=m
CONFIG_MFD_LP8788=y
CONFIG_MFD_TI_LMU=m
CONFIG_MFD_PALMAS=y
CONFIG_TPS6105X=m
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=m
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
CONFIG_MFD_TPS68470=y
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=m
CONFIG_MFD_TPS65912_SPI=y
CONFIG_MFD_TPS80031=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_MFD_LM3533=y
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=m
CONFIG_MFD_ARIZONA_SPI=y
# CONFIG_MFD_CS47L24 is not set
CONFIG_MFD_WM5102=y
# CONFIG_MFD_WM5110 is not set
# CONFIG_MFD_WM8997 is not set
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
CONFIG_MFD_WM8350=y
CONFIG_MFD_WM8350_I2C=y
CONFIG_MFD_WM8994=m
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_88PG86X is not set
# CONFIG_REGULATOR_88PM8607 is not set
# CONFIG_REGULATOR_ACT8865 is not set
CONFIG_REGULATOR_AD5398=m
CONFIG_REGULATOR_ANATOP=y
# CONFIG_REGULATOR_AAT2870 is not set
# CONFIG_REGULATOR_AB3100 is not set
CONFIG_REGULATOR_AS3711=y
# CONFIG_REGULATOR_BCM590XX is not set
CONFIG_REGULATOR_BD9571MWV=y
CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_DA9055=y
# CONFIG_REGULATOR_DA9062 is not set
CONFIG_REGULATOR_DA9063=y
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=m
CONFIG_REGULATOR_FAN53555=m
CONFIG_REGULATOR_GPIO=m
# CONFIG_REGULATOR_ISL9305 is not set
CONFIG_REGULATOR_ISL6271A=m
# CONFIG_REGULATOR_LM363X is not set
CONFIG_REGULATOR_LP3971=m
# CONFIG_REGULATOR_LP3972 is not set
CONFIG_REGULATOR_LP872X=m
CONFIG_REGULATOR_LP8755=m
# CONFIG_REGULATOR_LP8788 is not set
CONFIG_REGULATOR_LTC3589=m
CONFIG_REGULATOR_LTC3676=m
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX1586=m
CONFIG_REGULATOR_MAX8649=y
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_MAX8952=y
# CONFIG_REGULATOR_MAX8997 is not set
CONFIG_REGULATOR_MAX77693=m
CONFIG_REGULATOR_MT6311=m
# CONFIG_REGULATOR_PALMAS is not set
# CONFIG_REGULATOR_PCAP is not set
CONFIG_REGULATOR_PCF50633=m
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=m
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_PWM=m
# CONFIG_REGULATOR_QCOM_SPMI is not set
CONFIG_REGULATOR_TPS51632=y
# CONFIG_REGULATOR_TPS6105X is not set
CONFIG_REGULATOR_TPS62360=y
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_REGULATOR_TPS65132=m
CONFIG_REGULATOR_TPS6524X=y
# CONFIG_REGULATOR_TPS65912 is not set
CONFIG_REGULATOR_TPS80031=y
# CONFIG_REGULATOR_WM8350 is not set
CONFIG_REGULATOR_WM8400=m
CONFIG_REGULATOR_WM8994=m
CONFIG_RC_CORE=y
CONFIG_RC_MAP=y
CONFIG_LIRC=y
CONFIG_RC_DECODERS=y
CONFIG_IR_NEC_DECODER=y
# CONFIG_IR_RC5_DECODER is not set
# CONFIG_IR_RC6_DECODER is not set
CONFIG_IR_JVC_DECODER=m
# CONFIG_IR_SONY_DECODER is not set
CONFIG_IR_SANYO_DECODER=y
# CONFIG_IR_SHARP_DECODER is not set
# CONFIG_IR_MCE_KBD_DECODER is not set
CONFIG_IR_XMP_DECODER=y
# CONFIG_IR_IMON_DECODER is not set
# CONFIG_RC_DEVICES is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
CONFIG_AGP_VIA=y
CONFIG_INTEL_GTT=y
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
# CONFIG_DRM is not set
# CONFIG_DRM_DP_CEC is not set

#
# ACP (Audio CoProcessor) Configuration
#

#
# AMD Library routines
#

#
# Frame buffer Devices
#
# CONFIG_FB is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
CONFIG_LCD_LMS283GF05=y
CONFIG_LCD_LTV350QV=y
# CONFIG_LCD_ILI922X is not set
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=m
CONFIG_LCD_VGG2432A4=m
# CONFIG_LCD_PLATFORM is not set
CONFIG_LCD_S6E63M0=y
CONFIG_LCD_LD9040=y
CONFIG_LCD_AMS369FG06=y
# CONFIG_LCD_LMS501KF03 is not set
CONFIG_LCD_HX8357=m
CONFIG_LCD_OTM3225A=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_LM3533 is not set
CONFIG_BACKLIGHT_PWM=y
CONFIG_BACKLIGHT_DA9052=y
# CONFIG_BACKLIGHT_MAX8925 is not set
CONFIG_BACKLIGHT_APPLE=y
CONFIG_BACKLIGHT_PM8941_WLED=m
CONFIG_BACKLIGHT_SAHARA=y
CONFIG_BACKLIGHT_ADP5520=m
CONFIG_BACKLIGHT_ADP8860=y
# CONFIG_BACKLIGHT_ADP8870 is not set
CONFIG_BACKLIGHT_88PM860X=y
CONFIG_BACKLIGHT_PCF50633=m
# CONFIG_BACKLIGHT_AAT2870 is not set
CONFIG_BACKLIGHT_LM3630A=y
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
CONFIG_BACKLIGHT_LP8788=y
CONFIG_BACKLIGHT_AS3711=y
# CONFIG_BACKLIGHT_GPIO is not set
CONFIG_BACKLIGHT_LV5207LP=y
CONFIG_BACKLIGHT_BD6107=y
CONFIG_BACKLIGHT_ARCXCNN=y
# CONFIG_SOUND is not set

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=y
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_ASUS is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
CONFIG_HID_CHICONY=y
CONFIG_HID_COUGAR=m
# CONFIG_HID_CMEDIA is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
# CONFIG_HID_ELECOM is not set
CONFIG_HID_EZKEY=m
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=m
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=m
# CONFIG_HID_WALTOP is not set
CONFIG_HID_GYRATION=m
# CONFIG_HID_ICADE is not set
CONFIG_HID_ITE=m
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LED=m
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=m
# CONFIG_HID_LOGITECH_DJ is not set
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MAYFLASH is not set
CONFIG_HID_REDRAGON=y
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTI is not set
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PRIMAX=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SPEEDLINK=y
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=y
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_UDRAW_PS3=y
# CONFIG_HID_WIIMOTE is not set
CONFIG_HID_XINMO=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
# CONFIG_HID_ZYDACRON is not set
CONFIG_HID_SENSOR_HUB=m
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
CONFIG_HID_ALPS=y

#
# I2C HID support
#
CONFIG_I2C_HID=y

#
# Intel ISH HID support
#
CONFIG_INTEL_ISH_HID=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
CONFIG_USB_PCI=y

#
# USB port drivers
#

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_TAHVO_USB is not set
# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=m
CONFIG_MEMSTICK_JMICRON_38X=m
# CONFIG_MEMSTICK_R592 is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y

#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
# CONFIG_LEDS_APU is not set
CONFIG_LEDS_AS3645A=m
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3533 is not set
CONFIG_LEDS_LM3642=m
CONFIG_LEDS_LM3601X=y
CONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_PCA9532_GPIO is not set
CONFIG_LEDS_GPIO=m
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
# CONFIG_LEDS_LP5562 is not set
CONFIG_LEDS_LP8501=y
CONFIG_LEDS_LP8788=y
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m
# CONFIG_LEDS_PCA955X_GPIO is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_WM8350 is not set
CONFIG_LEDS_DA9052=m
CONFIG_LEDS_DAC124S085=m
CONFIG_LEDS_PWM=m
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEDS_BD2802=y
# CONFIG_LEDS_INTEL_SS4200 is not set
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_ADP5520=m
CONFIG_LEDS_TCA6507=m
# CONFIG_LEDS_TLC591XX is not set
CONFIG_LEDS_MAX8997=m
CONFIG_LEDS_LM355x=m

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
# CONFIG_LEDS_MLXCPLD is not set
CONFIG_LEDS_MLXREG=m
CONFIG_LEDS_USER=m
# CONFIG_LEDS_NIC78BX is not set

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
CONFIG_ACCESSIBILITY=y
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM860X=y
CONFIG_RTC_DRV_ABB5ZES3=m
CONFIG_RTC_DRV_ABX80X=y
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=y
# CONFIG_RTC_DRV_DS1374_WDT is not set
# CONFIG_RTC_DRV_DS1672 is not set
CONFIG_RTC_DRV_LP8788=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_MAX8925=m
# CONFIG_RTC_DRV_MAX8997 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8523=m
CONFIG_RTC_DRV_PCF85063=m
# CONFIG_RTC_DRV_PCF85363 is not set
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_PCF8583=m
# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_PALMAS is not set
CONFIG_RTC_DRV_TPS80031=m
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8010=y
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
CONFIG_RTC_DRV_RV8803=y

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=m
CONFIG_RTC_DRV_M41T94=m
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
CONFIG_RTC_DRV_DS1343=y
CONFIG_RTC_DRV_DS1347=m
CONFIG_RTC_DRV_DS1390=y
CONFIG_RTC_DRV_MAX6916=m
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
CONFIG_RTC_DRV_RX6110=y
# CONFIG_RTC_DRV_RS5C348 is not set
CONFIG_RTC_DRV_MAX6902=y
CONFIG_RTC_DRV_PCF2123=y
CONFIG_RTC_DRV_MCP795=y
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
# CONFIG_RTC_DRV_DS3232_HWMON is not set
CONFIG_RTC_DRV_PCF2127=y
CONFIG_RTC_DRV_RV3029C2=m
# CONFIG_RTC_DRV_RV3029_HWMON is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_DA9052=m
# CONFIG_RTC_DRV_DA9055 is not set
CONFIG_RTC_DRV_DA9063=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=y
# CONFIG_RTC_DRV_MSM6242 is not set
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
# CONFIG_RTC_DRV_V3020 is not set
CONFIG_RTC_DRV_WM8350=m
CONFIG_RTC_DRV_PCF50633=m
CONFIG_RTC_DRV_AB3100=y

#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_FTRTC010=m
CONFIG_RTC_DRV_PCAP=m

#
# HID Sensor RTC drivers
#
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
CONFIG_AUXDISPLAY=y
CONFIG_HD44780=m
CONFIG_KS0108=y
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
# CONFIG_IMG_ASCII_LCD is not set
CONFIG_PANEL=m
CONFIG_PANEL_PARPORT=0
CONFIG_PANEL_PROFILE=5
# CONFIG_PANEL_CHANGE_MESSAGE is not set
CONFIG_CHARLCD=m
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_DMEM_GENIRQ=m
# CONFIG_UIO_AEC is not set
CONFIG_UIO_SERCOS3=m
# CONFIG_UIO_PCI_GENERIC is not set
CONFIG_UIO_NETX=y
# CONFIG_UIO_PRUSS is not set
CONFIG_UIO_MF624=y
# CONFIG_UIO_HV_GENERIC is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
# CONFIG_VIRTIO_PCI is not set
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_MMIO=m
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_TSCPAGE=y
# CONFIG_HYPERV_BALLOON is not set
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
CONFIG_COMMON_CLK_MAX9485=m
CONFIG_COMMON_CLK_SI5351=m
CONFIG_COMMON_CLK_SI544=m
CONFIG_COMMON_CLK_CDCE706=y
CONFIG_COMMON_CLK_CS2000_CP=m
CONFIG_COMMON_CLK_PALMAS=m
CONFIG_COMMON_CLK_PWM=m
CONFIG_HWSPINLOCK=y

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_MAILBOX=y
# CONFIG_PCC is not set
CONFIG_ALTERA_MBOX=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IOVA=m
# CONFIG_AMD_IOMMU is not set

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y

#
# Rpmsg drivers
#
CONFIG_RPMSG=m
# CONFIG_RPMSG_CHAR is not set
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
CONFIG_RPMSG_VIRTIO=m
# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#

#
# Broadcom SoC drivers
#

#
# i.MX SoC drivers
#

#
# Qualcomm SoC drivers
#
CONFIG_SOC_TI=y

#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=m
CONFIG_DEVFREQ_GOV_POWERSAVE=y
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
CONFIG_DEVFREQ_GOV_PASSIVE=m

#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=y

#
# Extcon Device Drivers
#
CONFIG_EXTCON_GPIO=m
# CONFIG_EXTCON_INTEL_INT3496 is not set
CONFIG_EXTCON_MAX14577=m
# CONFIG_EXTCON_MAX3355 is not set
CONFIG_EXTCON_MAX77693=m
CONFIG_EXTCON_MAX8997=y
CONFIG_EXTCON_PALMAS=y
CONFIG_EXTCON_RT8973A=m
CONFIG_EXTCON_SM5502=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_MEMORY=y
# CONFIG_IIO is not set
CONFIG_NTB=y
# CONFIG_NTB_AMD is not set
CONFIG_NTB_IDT=m
CONFIG_NTB_INTEL=y
CONFIG_NTB_SWITCHTEC=y
CONFIG_NTB_PINGPONG=y
CONFIG_NTB_TOOL=m
# CONFIG_NTB_PERF is not set
CONFIG_NTB_TRANSPORT=m
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_LP3943=m
# CONFIG_PWM_LPSS_PCI is not set
# CONFIG_PWM_LPSS_PLATFORM is not set
CONFIG_PWM_PCA9685=y

#
# IRQ chip support
#
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_IPACK_BUS=y
CONFIG_BOARD_TPCI200=m
# CONFIG_SERIAL_IPOCTAL is not set
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_TI_SYSCON=y
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_BCM_KONA_USB2_PHY=y
CONFIG_PHY_PXA_28NM_HSIC=m
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
# CONFIG_RAS is not set
# CONFIG_THUNDERBOLT is not set

#
# Android
#
CONFIG_ANDROID=y
# CONFIG_ANDROID_BINDER_IPC is not set
CONFIG_DAX=y
CONFIG_NVMEM=y

#
# HW tracing support
#
CONFIG_STM=m
CONFIG_STM_DUMMY=m
CONFIG_STM_SOURCE_CONSOLE=m
CONFIG_STM_SOURCE_HEARTBEAT=m
# CONFIG_STM_SOURCE_FTRACE is not set
# CONFIG_INTEL_TH is not set
CONFIG_FPGA=y
CONFIG_ALTERA_PR_IP_CORE=y
CONFIG_FPGA_MGR_ALTERA_PS_SPI=y
# CONFIG_FPGA_MGR_ALTERA_CVP is not set
CONFIG_FPGA_MGR_XILINX_SPI=y
CONFIG_FPGA_MGR_MACHXO2_SPI=m
# CONFIG_FPGA_BRIDGE is not set
# CONFIG_FPGA_DFL is not set
CONFIG_PM_OPP=y
# CONFIG_UNISYS_VISORBUS is not set
CONFIG_SIOX=y
# CONFIG_SIOX_BUS_GPIO is not set
# CONFIG_SLIMBUS is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_OVERLAY_FS=y
CONFIG_OVERLAY_FS_REDIRECT_DIR=y
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
CONFIG_OVERLAY_FS_METACOPY=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=y
# CONFIG_EFIVAR_FS is not set
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=m
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=y
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=m
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=m
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
# CONFIG_NLS_ISO8859_7 is not set
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
CONFIG_NLS_MAC_CELTIC=y
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=y
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
# CONFIG_NLS_MAC_ICELAND is not set
CONFIG_NLS_MAC_INUIT=y
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
CONFIG_TRUSTED_KEYS=m
CONFIG_ENCRYPTED_KEYS=y
CONFIG_KEY_DH_OPERATIONS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_PAGE_TABLE_ISOLATION=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
CONFIG_SECURITY_YAMA=y
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
# CONFIG_INTEGRITY_TRUSTED_KEYRING is not set
# CONFIG_IMA is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
CONFIG_EVM_ADD_XATTRS=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=m
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_MCRYPTD=y
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_AEGIS128=y
# CONFIG_CRYPTO_AEGIS128L is not set
CONFIG_CRYPTO_AEGIS256=y
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
CONFIG_CRYPTO_AEGIS128L_AESNI_SSE2=m
CONFIG_CRYPTO_AEGIS256_AESNI_SSE2=m
CONFIG_CRYPTO_MORUS640=m
# CONFIG_CRYPTO_MORUS640_SSE2 is not set
CONFIG_CRYPTO_MORUS1280=m
CONFIG_CRYPTO_MORUS1280_GLUE=y
CONFIG_CRYPTO_MORUS1280_SSE2=y
CONFIG_CRYPTO_MORUS1280_AVX2=m
CONFIG_CRYPTO_SEQIV=m
# CONFIG_CRYPTO_ECHAINIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=m

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=y
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_POLY1305=m
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=m
# CONFIG_CRYPTO_SHA1_MB is not set
CONFIG_CRYPTO_SHA256_MB=y
# CONFIG_CRYPTO_SHA512_MB is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
# CONFIG_CRYPTO_SM3 is not set
CONFIG_CRYPTO_TGR192=y
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_X86_64=y
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=y
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_CAST6_AVX_X86_64=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CHACHA20_X86_64=y
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
# CONFIG_CRYPTO_SM4 is not set
CONFIG_CRYPTO_SPECK=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=y
CONFIG_CRYPTO_ZSTD=y

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
CONFIG_SYSTEM_EXTRA_CERTIFICATE=y
CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=m
# CONFIG_CRC32_SLICEBY8 is not set
CONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=m
# CONFIG_CRC4 is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DIRECT_OPS=y
CONFIG_SWIOTLB=y
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
CONFIG_GLOB_SELFTEST=y
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_CORDIC is not set
CONFIG_DDR=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
CONFIG_FONT_8x16=y
CONFIG_FONT_AUTOSELECT=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_STRING_SELFTEST=y

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_GDB_SCRIPTS is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
CONFIG_READABLE_ASM=y
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_STACK_VALIDATION=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_PAGE_POISONING=y
# CONFIG_PAGE_POISONING_NO_SANITY is not set
# CONFIG_PAGE_POISONING_ZERO is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
# CONFIG_DEBUG_OBJECTS_FREE is not set
# CONFIG_DEBUG_OBJECTS_TIMERS is not set
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_DEBUG_SLAB is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_VMACACHE is not set
# CONFIG_DEBUG_VM_RB is not set
CONFIG_DEBUG_VM_PGFLAGS=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_KCOV=y
CONFIG_KCOV_INSTRUMENT_ALL=y
CONFIG_DEBUG_SHIRQ=y

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
CONFIG_WQ_WATCHDOG=y
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_DEBUG_PREEMPT=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=y
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_TORTURE_TEST=y
# CONFIG_RCU_PERF_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
# CONFIG_FAIL_FUTEX is not set
# CONFIG_FAULT_INJECTION_DEBUG_FS is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_PREEMPTIRQ_EVENTS is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_TRACE_BRANCH_PROFILING=y
# CONFIG_BRANCH_PROFILE_NONE is not set
CONFIG_PROFILE_ANNOTATED_BRANCHES=y
# CONFIG_BRANCH_TRACER is not set
CONFIG_STACK_TRACER=y
# CONFIG_UPROBE_EVENTS is not set
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_MMIOTRACE_TEST is not set
CONFIG_TRACEPOINT_BENCHMARK=y
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
CONFIG_TRACE_EVAL_MAP_FILE=y
CONFIG_TRACING_EVENTS_GPIO=y
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_MEMTEST=y
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_EARLY_PRINTK_EFI=y
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
CONFIG_X86_PTDUMP_CORE=y
CONFIG_X86_PTDUMP=y
CONFIG_EFI_PGT_DUMP=y
# CONFIG_DEBUG_WX is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
CONFIG_DEBUG_NMI_SELFTEST=y
# CONFIG_X86_DEBUG_FPU is not set
CONFIG_PUNIT_ATOM_DEBUG=m
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# CONFIG_UNWINDER_GUESS is not set

[-- Attachment #3: job-script --]
[-- Type: text/plain, Size: 4066 bytes --]

#!/bin/sh

export_top_env()
{
	export suite='trinity'
	export testcase='trinity'
	export category='functional'
	export runtime=300
	export job_origin='/lkp/lkp/src/allot/rand/vm-lkp-hsw-4ep1-openwrt-ia32/trinity.yaml'
	export testbox='vm-lkp-hsw-4ep1-openwrt-ia32-13'
	export tbox_group='vm-lkp-hsw-4ep1-openwrt-ia32'
	export model='qemu-system-x86_64 -enable-kvm'
	export nr_vm=64
	export nr_cpu=1
	export memory='256M'
	export rootfs='openwrt-i386-2016-03-16.cgz'
	export hdd_partitions='/dev/vda'
	export swap_partitions='/dev/vdb'
	export kconfig='x86_64-randconfig-s4-09012059'
	export compiler='gcc-7'
	export queue='validate'
	export branch='linux-devel/devel-hourly-2018090116'
	export commit='0b4f83d510f6fef6bb9da25f122c8d733d50516f'
	export repeat_to=6
	export submit_id='5b9193f30b9a93b53f8e3cad'
	export job_file='/lkp/jobs/scheduled/vm-lkp-hsw-4ep1-openwrt-ia32-13/trinity-300s-openwrt-i386-2016-03-16.cgz-0b4f83d510f6fef6bb9da25f122c8d733d50516f-20180907-46399-1qzh08l-3.yaml'
	export id='0e7d2f92484792ce2d36b0a7502ac7145a52ce93'
	export need_kconfig='CONFIG_KVM_GUEST=y'
	export enqueue_time='2018-09-07 04:54:12 +0800'
	export _id='5b9193f30b9a93b53f8e3cad'
	export _rt='/result/trinity/300s/vm-lkp-hsw-4ep1-openwrt-ia32/openwrt-i386-2016-03-16.cgz/x86_64-randconfig-s4-09012059/gcc-7/0b4f83d510f6fef6bb9da25f122c8d733d50516f'
	export user='lkp'
	export result_root='/result/trinity/300s/vm-lkp-hsw-4ep1-openwrt-ia32/openwrt-i386-2016-03-16.cgz/x86_64-randconfig-s4-09012059/gcc-7/0b4f83d510f6fef6bb9da25f122c8d733d50516f/3'
	export LKP_SERVER='inn'
	export max_uptime=1500
	export initrd='/osimage/openwrt/openwrt-i386-2016-03-16.cgz'
	export bootloader_append='root=/dev/ram0
user=lkp
job=/lkp/jobs/scheduled/vm-lkp-hsw-4ep1-openwrt-ia32-13/trinity-300s-openwrt-i386-2016-03-16.cgz-0b4f83d510f6fef6bb9da25f122c8d733d50516f-20180907-46399-1qzh08l-3.yaml
ARCH=x86_64
kconfig=x86_64-randconfig-s4-09012059
branch=linux-devel/devel-hourly-2018090116
commit=0b4f83d510f6fef6bb9da25f122c8d733d50516f
BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s4-09012059/gcc-7/0b4f83d510f6fef6bb9da25f122c8d733d50516f/vmlinuz-4.18.0-11684-g0b4f83d
max_uptime=1500
RESULT_ROOT=/result/trinity/300s/vm-lkp-hsw-4ep1-openwrt-ia32/openwrt-i386-2016-03-16.cgz/x86_64-randconfig-s4-09012059/gcc-7/0b4f83d510f6fef6bb9da25f122c8d733d50516f/3
LKP_SERVER=inn
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
console=tty0
earlyprintk=ttyS0,115200
console=ttyS0,115200
vga=normal
rw'
	export modules_initrd='/pkg/linux/x86_64-randconfig-s4-09012059/gcc-7/0b4f83d510f6fef6bb9da25f122c8d733d50516f/modules.cgz'
	export bm_initrd='/osimage/pkg/debian-x86_64-2016-08-31.cgz/trinity-static-i386-x86_64-6ddabfd2_2017-11-10.cgz'
	export lkp_initrd='/lkp/lkp/lkp-i386.cgz'
	export site='inn'
	export LKP_CGI_PORT=80
	export LKP_CIFS_PORT=139
	export kernel='/pkg/linux/x86_64-randconfig-s4-09012059/gcc-7/0b4f83d510f6fef6bb9da25f122c8d733d50516f/vmlinuz-4.18.0-11684-g0b4f83d'
	export dequeue_time='2018-09-07 04:54:16 +0800'
	export job_initrd='/lkp/jobs/scheduled/vm-lkp-hsw-4ep1-openwrt-ia32-13/trinity-300s-openwrt-i386-2016-03-16.cgz-0b4f83d510f6fef6bb9da25f122c8d733d50516f-20180907-46399-1qzh08l-3.cgz'

	[ -n "$LKP_SRC" ] ||
	export LKP_SRC=/lkp/${user:-lkp}/src
}

run_job()
{
	echo $$ > $TMP/run-job.pid

	. $LKP_SRC/lib/http.sh
	. $LKP_SRC/lib/job.sh
	. $LKP_SRC/lib/env.sh

	export_top_env

	run_monitor $LKP_SRC/monitors/wrapper kmsg
	run_monitor $LKP_SRC/monitors/wrapper heartbeat
	run_monitor $LKP_SRC/monitors/wrapper oom-killer
	run_monitor $LKP_SRC/monitors/plain/watchdog

	run_test $LKP_SRC/tests/wrapper trinity
}

extract_stats()
{
	$LKP_SRC/stats/wrapper kmsg

	$LKP_SRC/stats/wrapper time trinity.time
	$LKP_SRC/stats/wrapper time
	$LKP_SRC/stats/wrapper dmesg
	$LKP_SRC/stats/wrapper kmsg
	$LKP_SRC/stats/wrapper stderr
	$LKP_SRC/stats/wrapper last_state
}

"$@"

[-- Attachment #4: dmesg.xz --]
[-- Type: application/x-xz, Size: 17852 bytes --]

Re: [LKP] [tty] 0b4f83d510: INFO:task_blocked_for_more_than#seconds

[Jiri Slaby]

On 09/07/2018, 06:50 AM, kernel test robot wrote:
> FYI, we noticed the following commit (built with gcc-7):
> 
> commit: 0b4f83d510f6fef6bb9da25f122c8d733d50516f ("[PATCH 2/4] tty: Hold tty_ldisc_lock() during tty_reopen()")
> url: https://github.com/0day-ci/linux/commits/Dmitry-Safonov/tty-Hold-write-ldisc-sem-in-tty_reopen/20180829-165618
> base: https://git.kernel.org/cgit/linux/kernel/git/gregkh/tty.git tty-testing
> 
> in testcase: trinity
> with following parameters:
> 
> 	runtime: 300s
> 
> test-description: Trinity is a linux system call fuzz tester.
> test-url: http://codemonkey.org.uk/projects/trinity/
> 
> 
> on test machine: qemu-system-x86_64 -enable-kvm -m 256M
> 
> caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
> 
> 
> +--------------------------------------------------+------------+------------+
> |                                                  | 58dd163974 | 0b4f83d510 |
> +--------------------------------------------------+------------+------------+
> | boot_successes                                   | 14         | 4          |
> | boot_failures                                    | 0          | 6          |
> | INFO:task_blocked_for_more_than#seconds          | 0          | 6          |
> | Kernel_panic-not_syncing:hung_task:blocked_tasks | 0          | 6          |
> +--------------------------------------------------+------------+------------+
> 
> 
> 
> [  244.816801] INFO: task validate_data:655 blocked for more than 120 seconds.
> [  244.818833]       Not tainted 4.18.0-11684-g0b4f83d #1
> [  244.820028] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [  244.826965] validate_data   D    0   655    623 0x20020000
> [  244.828279] Call Trace:
> [  244.828958]  ? __schedule+0x843/0x950
> [  244.830173]  ? __ldsem_down_read_nested+0x1c4/0x3b0
> [  244.834903]  schedule+0x31/0x70
> [  244.835665]  schedule_timeout+0x34/0x760
> [  244.836613]  ? ftrace_likely_update+0x35/0x60
> [  244.837683]  ? __ldsem_down_read_nested+0x1c4/0x3b0
> [  244.838818]  ? ftrace_likely_update+0x35/0x60
> [  244.840127]  ? ftrace_likely_update+0x35/0x60
> [  244.845947]  ? __ldsem_down_read_nested+0x1c4/0x3b0
> [  244.847882]  __ldsem_down_read_nested+0x23a/0x3b0
> [  244.849886]  ? tty_ldisc_ref_wait+0x25/0x50
> [  244.853807]  tty_ldisc_ref_wait+0x25/0x50
> [  244.854946]  tty_compat_ioctl+0x8a/0x120
> [  244.855928]  ? this_tty+0x80/0x80
> [  244.856742]  __ia32_compat_sys_ioctl+0xc28/0x1ce0
> [  244.857981]  do_int80_syscall_32+0x1d2/0x5f0
> [  244.859003]  entry_INT80_compat+0x88/0xa0
> [  244.859972] INFO: task dnsmasq:668 blocked for more than 120 seconds.
> [  244.868315]       Not tainted 4.18.0-11684-g0b4f83d #1
> [  244.869583] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [  244.871744] dnsmasq         D    0   668      1 0x20020000
> [  244.873063] Call Trace:
> [  244.873697]  ? __schedule+0x843/0x950
> [  244.874572]  ? __ldsem_down_read_nested+0x1c4/0x3b0
> [  244.875725]  schedule+0x31/0x70
> [  244.876576]  schedule_timeout+0x34/0x760
> [  244.877573]  ? ftrace_likely_update+0x35/0x60
> [  244.878660]  ? __ldsem_down_read_nested+0x1c4/0x3b0
> [  244.879872]  ? ftrace_likely_update+0x35/0x60
> [  244.890522]  ? ftrace_likely_update+0x35/0x60
> [  244.891572]  ? __ldsem_down_read_nested+0x1c4/0x3b0
> [  244.892746]  __ldsem_down_read_nested+0x23a/0x3b0
> [  244.893861]  ? tty_ldisc_ref_wait+0x25/0x50
> [  244.894841]  tty_ldisc_ref_wait+0x25/0x50
> [  244.895911]  tty_compat_ioctl+0x8a/0x120
> [  244.896916]  ? this_tty+0x80/0x80
> [  244.897717]  __ia32_compat_sys_ioctl+0xc28/0x1ce0
> [  244.898821]  do_int80_syscall_32+0x1d2/0x5f0
> [  244.899830]  entry_INT80_compat+0x88/0xa0
> [  244.909466] INFO: task dropbear:734 blocked for more than 120 seconds.
> [  244.911173]       Not tainted 4.18.0-11684-g0b4f83d #1
> [  244.912394] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [  244.914176] dropbear        D    0   734      1 0x20020000
> [  244.915446] Call Trace:
> [  244.916068]  ? __schedule+0x843/0x950
> [  244.916945]  ? __ldsem_down_read_nested+0x1c4/0x3b0
> [  244.918076]  schedule+0x31/0x70
> [  244.918832]  schedule_timeout+0x34/0x760
> [  244.919781]  ? ftrace_likely_update+0x35/0x60
> [  244.921104]  ? __ldsem_down_read_nested+0x1c4/0x3b0
> [  244.922304]  ? ftrace_likely_update+0x35/0x60
> [  244.923347]  ? ftrace_likely_update+0x35/0x60
> [  244.924369]  ? __ldsem_down_read_nested+0x1c4/0x3b0
> [  244.925496]  __ldsem_down_read_nested+0x23a/0x3b0
> [  244.926598]  ? tty_ldisc_ref_wait+0x25/0x50
> [  244.927578]  tty_ldisc_ref_wait+0x25/0x50
> [  244.928526]  tty_compat_ioctl+0x8a/0x120
> [  244.929449]  ? this_tty+0x80/0x80
> [  244.930240]  __ia32_compat_sys_ioctl+0xc28/0x1ce0
> [  244.940083]  do_int80_syscall_32+0x1d2/0x5f0
> [  244.941310]  entry_INT80_compat+0x88/0xa0
> [  244.944070] 
> [  244.944070] Showing all locks held in the system:
> [  244.945558] 1 lock held by khungtaskd/18:
> [  244.946495]  #0: (____ptrval____) (rcu_read_lock){....}, at: debug_show_all_locks+0x16/0x190
> [  244.948503] 2 locks held by askfirst/235:
> [  244.949439]  #0: (____ptrval____) (&tty->ldisc_sem){++++}, at: tty_ldisc_ref_wait+0x25/0x50
> [  244.951762]  #1: (____ptrval____) (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0x13d/0xa00

Here, it just seems to wait for input from the user.

> [  244.953799] 1 lock held by validate_data/655:
> [  244.954814]  #0: (____ptrval____) (&tty->ldisc_sem){++++}, at: tty_ldisc_ref_wait+0x25/0x50
> [  244.956764] 1 lock held by dnsmasq/668:
> [  244.957649]  #0: (____ptrval____) (&tty->ldisc_sem){++++}, at: tty_ldisc_ref_wait+0x25/0x50
> [  244.959598] 1 lock held by dropbear/734:
> [  244.967564]  #0: (____ptrval____) (&tty->ldisc_sem){++++}, at: tty_ldisc_ref_wait+0x25/0x50

Hmm, I assume there is another task waiting for write_ldsem and that one
prevents these readers to proceed. Unfortunately, due to the defunct
__ptrval__ pointer hashing crap, we do not see who is waiting for what.
But I am guessing all are the same locks.

So I think, we are forced to limit the waiting to 5 seconds in reopen in
the end too (the same as we do for new open in tty_init_dev).

Dmitry, could you add the limit and handle the return value of
tty_ldisc_lock now?

thanks,
-- 
js
suse labs

Re: [LKP] [tty] 0b4f83d510: INFO:task_blocked_for_more_than#seconds

[Dmitry Safonov]

On Fri, 2018-09-07 at 08:39 +0200, Jiri Slaby wrote:
> On 09/07/2018, 06:50 AM, kernel test robot wrote:
> > FYI, we noticed the following commit (built with gcc-7):
> > 
> > commit: 0b4f83d510f6fef6bb9da25f122c8d733d50516f ("[PATCH 2/4] tty:
> > Hold tty_ldisc_lock() during tty_reopen()")
> > url: https://github.com/0day-ci/linux/commits/Dmitry-Safonov/tty-Ho
> > ld-write-ldisc-sem-in-tty_reopen/20180829-165618
> > base: https://git.kernel.org/cgit/linux/kernel/git/gregkh/tty.git
> > tty-testing
> > 
> > in testcase: trinity
> > with following parameters:
> > 
> > 	runtime: 300s
> > 
> > test-description: Trinity is a linux system call fuzz tester.
> > test-url: http://codemonkey.org.uk/projects/trinity/
> > 
> > 
> > on test machine: qemu-system-x86_64 -enable-kvm -m 256M
> > 
> > caused below changes (please refer to attached dmesg/kmsg for
> > entire log/backtrace):
> > 
> > 
> > +--------------------------------------------------+------------+
> > ------------+
> > >                                                  | 58dd163974 |
> > > 0b4f83d510 |
> > 
> > +--------------------------------------------------+------------+
> > ------------+
> > > boot_successes                                   | 14         |
> > > 4          |
> > > boot_failures                                    | 0          |
> > > 6          |
> > > INFO:task_blocked_for_more_than#seconds          | 0          |
> > > 6          |
> > > Kernel_panic-not_syncing:hung_task:blocked_tasks | 0          |
> > > 6          |
> > 
> > +--------------------------------------------------+------------+
> > ------------+
> > 
> > 
> > 
> > [  244.816801] INFO: task validate_data:655 blocked for more than
> > 120 seconds.
> > [  244.818833]       Not tainted 4.18.0-11684-g0b4f83d #1
> > [  244.820028] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
> > disables this message.
> > [  244.826965] validate_data   D    0   655    623 0x20020000
> > [  244.828279] Call Trace:
> > [  244.828958]  ? __schedule+0x843/0x950
> > [  244.830173]  ? __ldsem_down_read_nested+0x1c4/0x3b0
> > [  244.834903]  schedule+0x31/0x70
> > [  244.835665]  schedule_timeout+0x34/0x760
> > [  244.836613]  ? ftrace_likely_update+0x35/0x60
> > [  244.837683]  ? __ldsem_down_read_nested+0x1c4/0x3b0
> > [  244.838818]  ? ftrace_likely_update+0x35/0x60
> > [  244.840127]  ? ftrace_likely_update+0x35/0x60
> > [  244.845947]  ? __ldsem_down_read_nested+0x1c4/0x3b0
> > [  244.847882]  __ldsem_down_read_nested+0x23a/0x3b0
> > [  244.849886]  ? tty_ldisc_ref_wait+0x25/0x50
> > [  244.853807]  tty_ldisc_ref_wait+0x25/0x50
> > [  244.854946]  tty_compat_ioctl+0x8a/0x120
> > [  244.855928]  ? this_tty+0x80/0x80
> > [  244.856742]  __ia32_compat_sys_ioctl+0xc28/0x1ce0
> > [  244.857981]  do_int80_syscall_32+0x1d2/0x5f0
> > [  244.859003]  entry_INT80_compat+0x88/0xa0
> > [  244.859972] INFO: task dnsmasq:668 blocked for more than 120
> > seconds.
> > [  244.868315]       Not tainted 4.18.0-11684-g0b4f83d #1
> > [  244.869583] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
> > disables this message.
> > [  244.871744] dnsmasq         D    0   668      1 0x20020000
> > [  244.873063] Call Trace:
> > [  244.873697]  ? __schedule+0x843/0x950
> > [  244.874572]  ? __ldsem_down_read_nested+0x1c4/0x3b0
> > [  244.875725]  schedule+0x31/0x70
> > [  244.876576]  schedule_timeout+0x34/0x760
> > [  244.877573]  ? ftrace_likely_update+0x35/0x60
> > [  244.878660]  ? __ldsem_down_read_nested+0x1c4/0x3b0
> > [  244.879872]  ? ftrace_likely_update+0x35/0x60
> > [  244.890522]  ? ftrace_likely_update+0x35/0x60
> > [  244.891572]  ? __ldsem_down_read_nested+0x1c4/0x3b0
> > [  244.892746]  __ldsem_down_read_nested+0x23a/0x3b0
> > [  244.893861]  ? tty_ldisc_ref_wait+0x25/0x50
> > [  244.894841]  tty_ldisc_ref_wait+0x25/0x50
> > [  244.895911]  tty_compat_ioctl+0x8a/0x120
> > [  244.896916]  ? this_tty+0x80/0x80
> > [  244.897717]  __ia32_compat_sys_ioctl+0xc28/0x1ce0
> > [  244.898821]  do_int80_syscall_32+0x1d2/0x5f0
> > [  244.899830]  entry_INT80_compat+0x88/0xa0
> > [  244.909466] INFO: task dropbear:734 blocked for more than 120
> > seconds.
> > [  244.911173]       Not tainted 4.18.0-11684-g0b4f83d #1
> > [  244.912394] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
> > disables this message.
> > [  244.914176] dropbear        D    0   734      1 0x20020000
> > [  244.915446] Call Trace:
> > [  244.916068]  ? __schedule+0x843/0x950
> > [  244.916945]  ? __ldsem_down_read_nested+0x1c4/0x3b0
> > [  244.918076]  schedule+0x31/0x70
> > [  244.918832]  schedule_timeout+0x34/0x760
> > [  244.919781]  ? ftrace_likely_update+0x35/0x60
> > [  244.921104]  ? __ldsem_down_read_nested+0x1c4/0x3b0
> > [  244.922304]  ? ftrace_likely_update+0x35/0x60
> > [  244.923347]  ? ftrace_likely_update+0x35/0x60
> > [  244.924369]  ? __ldsem_down_read_nested+0x1c4/0x3b0
> > [  244.925496]  __ldsem_down_read_nested+0x23a/0x3b0
> > [  244.926598]  ? tty_ldisc_ref_wait+0x25/0x50
> > [  244.927578]  tty_ldisc_ref_wait+0x25/0x50
> > [  244.928526]  tty_compat_ioctl+0x8a/0x120
> > [  244.929449]  ? this_tty+0x80/0x80
> > [  244.930240]  __ia32_compat_sys_ioctl+0xc28/0x1ce0
> > [  244.940083]  do_int80_syscall_32+0x1d2/0x5f0
> > [  244.941310]  entry_INT80_compat+0x88/0xa0
> > [  244.944070] 
> > [  244.944070] Showing all locks held in the system:
> > [  244.945558] 1 lock held by khungtaskd/18:
> > [  244.946495]  #0: (____ptrval____) (rcu_read_lock){....}, at:
> > debug_show_all_locks+0x16/0x190
> > [  244.948503] 2 locks held by askfirst/235:
> > [  244.949439]  #0: (____ptrval____) (&tty->ldisc_sem){++++}, at:
> > tty_ldisc_ref_wait+0x25/0x50
> > [  244.951762]  #1: (____ptrval____) (&ldata-
> > >atomic_read_lock){+.+.}, at: n_tty_read+0x13d/0xa00
> 
> Here, it just seems to wait for input from the user.
> 
> > [  244.953799] 1 lock held by validate_data/655:
> > [  244.954814]  #0: (____ptrval____) (&tty->ldisc_sem){++++}, at:
> > tty_ldisc_ref_wait+0x25/0x50
> > [  244.956764] 1 lock held by dnsmasq/668:
> > [  244.957649]  #0: (____ptrval____) (&tty->ldisc_sem){++++}, at:
> > tty_ldisc_ref_wait+0x25/0x50
> > [  244.959598] 1 lock held by dropbear/734:
> > [  244.967564]  #0: (____ptrval____) (&tty->ldisc_sem){++++}, at:
> > tty_ldisc_ref_wait+0x25/0x50
> 
> Hmm, I assume there is another task waiting for write_ldsem and that
> one
> prevents these readers to proceed. Unfortunately, due to the defunct
> __ptrval__ pointer hashing crap, we do not see who is waiting for
> what.
> But I am guessing all are the same locks.

Hmm, and the writer is not able to grab it because there is already
reader who uses console, I suppose.
I wonder if we can add re-acquiring for the reader side..
That will make write acquire less likely to fail under the load.
I'll try to reproduce it.

> 
> So I think, we are forced to limit the waiting to 5 seconds in reopen
> in
> the end too (the same as we do for new open in tty_init_dev).
> 
> Dmitry, could you add the limit and handle the return value of
> tty_ldisc_lock now?

Yeah, will do.

-- 
Thanks,
             Dmitry

Re: [LKP] [tty] 0b4f83d510: INFO:task_blocked_for_more_than#seconds

[Sergey Senozhatsky]

On (09/07/18 08:39), Jiri Slaby wrote:
> > [  244.944070] 
> > [  244.944070] Showing all locks held in the system:
> > [  244.945558] 1 lock held by khungtaskd/18:
> > [  244.946495]  #0: (____ptrval____) (rcu_read_lock){....}, at: debug_show_all_locks+0x16/0x190
> > [  244.948503] 2 locks held by askfirst/235:
> > [  244.949439]  #0: (____ptrval____) (&tty->ldisc_sem){++++}, at: tty_ldisc_ref_wait+0x25/0x50
> > [  244.951762]  #1: (____ptrval____) (&ldata->atomic_read_lock){+.+.}, at: n_tty_read+0x13d/0xa00
> 
> Here, it just seems to wait for input from the user.
> 
> > [  244.953799] 1 lock held by validate_data/655:
> > [  244.954814]  #0: (____ptrval____) (&tty->ldisc_sem){++++}, at: tty_ldisc_ref_wait+0x25/0x50
> > [  244.956764] 1 lock held by dnsmasq/668:
> > [  244.957649]  #0: (____ptrval____) (&tty->ldisc_sem){++++}, at: tty_ldisc_ref_wait+0x25/0x50
> > [  244.959598] 1 lock held by dropbear/734:
> > [  244.967564]  #0: (____ptrval____) (&tty->ldisc_sem){++++}, at: tty_ldisc_ref_wait+0x25/0x50
> 
> Hmm, I assume there is another task waiting for write_ldsem and that one
> prevents these readers to proceed. Unfortunately, due to the defunct
> __ptrval__ pointer hashing crap, we do not see who is waiting for what.
> But I am guessing all are the same locks.

Hmm, interesting. Am I getting it right that the test did pass before.
And now we see that sort of/smells like live-lock right after the
introduction of tty_ldisc_lock() to tty_reopen().

> So I think, we are forced to limit the waiting to 5 seconds in reopen in
> the end too (the same as we do for new open in tty_init_dev).

If I got it right, LKP did test the 5*HZ patch

	retval = tty_ldisc_lock(tty, 5 * HZ);

At least it's
 In-Reply-To: <20180829022353.23568-3-dima@arista.com>

and
 Message-Id: <20180829022353.23568-3-dima@arista.com>

is the patch which does the 5*HZ lock timeout thing.

	-ss

Re: [LKP] [tty] 0b4f83d510: INFO:task_blocked_for_more_than#seconds

[Dmitry Safonov]

Hi Sergey, Jiri,

On Mon, 2018-09-10 at 14:14 +0900, Sergey Senozhatsky wrote:
> On (09/07/18 08:39), Jiri Slaby wrote:
> > > [  244.944070] 
> > > [  244.944070] Showing all locks held in the system:
> > > [  244.945558] 1 lock held by khungtaskd/18:
> > > [  244.946495]  #0: (____ptrval____) (rcu_read_lock){....}, at:
> > > debug_show_all_locks+0x16/0x190
> > > [  244.948503] 2 locks held by askfirst/235:
> > > [  244.949439]  #0: (____ptrval____) (&tty->ldisc_sem){++++}, at:
> > > tty_ldisc_ref_wait+0x25/0x50
> > > [  244.951762]  #1: (____ptrval____) (&ldata-
> > > >atomic_read_lock){+.+.}, at: n_tty_read+0x13d/0xa00
> > 
> > Here, it just seems to wait for input from the user.
> > 
> > > [  244.953799] 1 lock held by validate_data/655:
> > > [  244.954814]  #0: (____ptrval____) (&tty->ldisc_sem){++++}, at:
> > > tty_ldisc_ref_wait+0x25/0x50
> > > [  244.956764] 1 lock held by dnsmasq/668:
> > > [  244.957649]  #0: (____ptrval____) (&tty->ldisc_sem){++++}, at:
> > > tty_ldisc_ref_wait+0x25/0x50
> > > [  244.959598] 1 lock held by dropbear/734:
> > > [  244.967564]  #0: (____ptrval____) (&tty->ldisc_sem){++++}, at:
> > > tty_ldisc_ref_wait+0x25/0x50
> > 
> > Hmm, I assume there is another task waiting for write_ldsem and
> > that one
> > prevents these readers to proceed. Unfortunately, due to the
> > defunct
> > __ptrval__ pointer hashing crap, we do not see who is waiting for
> > what.
> > But I am guessing all are the same locks.
> 
> Hmm, interesting. Am I getting it right that the test did pass
> before.
> And now we see that sort of/smells like live-lock right after the
> introduction of tty_ldisc_lock() to tty_reopen().
> 
> > So I think, we are forced to limit the waiting to 5 seconds in
> > reopen in
> > the end too (the same as we do for new open in tty_init_dev).
> 
> If I got it right, LKP did test the 5*HZ patch
> 
> 	retval = tty_ldisc_lock(tty, 5 * HZ);
> 
> At least it's
>  In-Reply-To: <20180829022353.23568-3-dima@arista.com>
> 
> and
>  Message-Id: <20180829022353.23568-3-dima@arista.com>
> 
> is the patch which does the 5*HZ lock timeout thing.

Yeah, I also noticed on the weekend that the commit in the mentioned
branch is from v1..

Currently, I tried to reproduce it like ~15-20 times, but unlucky :(

It looks like, the lockup wasn't introduced by this commit, but
unfortunately the commit made it more likely. At least, that's what I
suppose after I've found this report:
https://lkml.org/lkml/2017/11/21/216

It seems to me that the lockup is triggered by:
[  244.948503] 2 locks held by askfirst/235:
[  244.949439]  #0: (____ptrval____) (&tty->ldisc_sem){++++}, at:
tty_ldisc_ref_wait+0x25/0x50
[  244.951762]  #1: (____ptrval____) (&ldata->atomic_read_lock){+.+.},
at: n_tty_read+0x13d/0xa00

Looking into this..

-- 
Thanks,
             Dmitry