[PATCH v2 0/3] arm64: dts: qcom: pm8998: Add ADC node and die temperature channel

[PATCH v2 0/3] arm64: dts: qcom: pm8998: Add ADC node and die temperature channel

[Matthias Kaehlcke]

This series adds the DT node for the QCOM SPMI PMIC5 ADC and a channel
for the die temperature.

The die temperature is going to be used by the temperature alarm driver
(https://lore.kernel.org/patchwork/project/lkml/list/?series=361416).

My understanding is that some of the ADC channels are/can be universally
useful on devices with a pm8998, while the use of others is device specific
(e.g. AMUX). Siddartha / QCA folks, are there other generally useful ADC
channels that should be added here?

The driver for the QCOM SPMI PMIC5 ADC landed in the 'testing' branch of the
'iio' tree:

https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git/commit/?h=testing&id=e13d757279bbc59776c8435fb94e54b5a58bdd0b

Matthias Kaehlcke (3):
  dt-bindings: iio: vadc: Fix documentation of 'reg'
  arm64: dts: qcom: pm8998: Add adc node
  arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC

 .../bindings/iio/adc/qcom,spmi-vadc.txt         |  4 ++--
 arch/arm64/boot/dts/qcom/pm8998.dtsi            | 17 ++++++++++++++++-
 2 files changed, 18 insertions(+), 3 deletions(-)

-- 
2.19.0.rc2.392.g5ba43deb5a-goog

[PATCH v2 1/3] dt-bindings: iio: vadc: Fix documentation of 'reg'

[Matthias Kaehlcke]

The documentation of Qualcomm's SPMI PMIC voltage ADC claims that the
'reg' property consists of two values, the SPMI address and the length
of the controller's registers. However the SPMI bus to which it is added
specifies "#size-cells = <0>;". Remove the controller register length
from the documentation of the field and the example.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
--
Changes in v2:
- none
---
 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
index 0fb46137f936..d0c188e5c922 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
@@ -13,7 +13,7 @@ VADC node:
 - reg:
     Usage: required
     Value type: <prop-encoded-array>
-    Definition: VADC base address and length in the SPMI PMIC register map.
+    Definition: VADC base address in the SPMI PMIC register map.
 
 - #address-cells:
     Usage: required
@@ -104,7 +104,7 @@ Example:
 	/* VADC node */
 	pmic_vadc: vadc@3100 {
 		compatible = "qcom,spmi-vadc";
-		reg = <0x3100 0x100>;
+		reg = <0x3100>;
 		interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
2.19.0.rc2.392.g5ba43deb5a-goog

Re: [PATCH v2 1/3] dt-bindings: iio: vadc: Fix documentation of 'reg'

[Jonathan Cameron]

On Thu,  6 Sep 2018 14:04:52 -0700
Matthias Kaehlcke <mka@chromium.org> wrote:

> The documentation of Qualcomm's SPMI PMIC voltage ADC claims that the
> 'reg' property consists of two values, the SPMI address and the length
> of the controller's registers. However the SPMI bus to which it is added
> specifies "#size-cells = <0>;". Remove the controller register length
> from the documentation of the field and the example.
> 
> Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Applied to the togreg branch of iio.git.

Thanks,

Jonathan

> --
> Changes in v2:
> - none
> ---
>  Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
> index 0fb46137f936..d0c188e5c922 100644
> --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
> +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
> @@ -13,7 +13,7 @@ VADC node:
>  - reg:
>      Usage: required
>      Value type: <prop-encoded-array>
> -    Definition: VADC base address and length in the SPMI PMIC register map.
> +    Definition: VADC base address in the SPMI PMIC register map.
>  
>  - #address-cells:
>      Usage: required
> @@ -104,7 +104,7 @@ Example:
>  	/* VADC node */
>  	pmic_vadc: vadc@3100 {
>  		compatible = "qcom,spmi-vadc";
> -		reg = <0x3100 0x100>;
> +		reg = <0x3100>;
>  		interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
>  		#address-cells = <1>;
>  		#size-cells = <0>;

[PATCH v2 2/3] arm64: dts: qcom: pm8998: Add adc node

[Matthias Kaehlcke]

This adds the adc node to pm8998 based on the examples in the
bindings. It also fixes the order of the included headers.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
--
Changes in v2:
- removed io-channel-ranges attribute
---
 arch/arm64/boot/dts/qcom/pm8998.dtsi | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
index 92bed1e7d4bb..41593ebbea2c 100644
--- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
@@ -1,8 +1,9 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /* Copyright 2018 Google LLC. */
 
-#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
 
 &spmi_bus {
 	pm8998_lsid0: pmic@0 {
@@ -11,6 +12,15 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pm8998_adc: adc@3100 {
+			compatible = "qcom,spmi-adc-rev2";
+			reg = <0x3100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+		};
+
 		pm8998_gpio: gpios@c000 {
 			compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
-- 
2.19.0.rc2.392.g5ba43deb5a-goog

Re: [PATCH v2 2/3] arm64: dts: qcom: pm8998: Add adc node

[Doug Anderson]

Hi,

On Thu, Sep 6, 2018 at 2:04 PM, Matthias Kaehlcke <mka@chromium.org> wrote:
> This adds the adc node to pm8998 based on the examples in the
> bindings. It also fixes the order of the included headers.
>
> Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> --
> Changes in v2:
> - removed io-channel-ranges attribute
> ---
>  arch/arm64/boot/dts/qcom/pm8998.dtsi | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)

Reviewed-by: Douglas Anderson <dianders@chromium.org>

[PATCH v2 3/3] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC

[Matthias Kaehlcke]

Add a channel node for the die temperature to the ADC.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
--
Changes in v2:
- none
---
 arch/arm64/boot/dts/qcom/pm8998.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
index 41593ebbea2c..d18d4f260fbe 100644
--- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
@@ -19,6 +19,11 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#io-channel-cells = <1>;
+
+			die-temp {
+				reg = <ADC5_DIE_TEMP>;
+				label = "die_temp";
+			};
 		};
 
 		pm8998_gpio: gpios@c000 {
-- 
2.19.0.rc2.392.g5ba43deb5a-goog

Re: [PATCH v2 3/3] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC

[Doug Anderson]

Hi,

On Thu, Sep 6, 2018 at 2:04 PM, Matthias Kaehlcke <mka@chromium.org> wrote:
> Add a channel node for the die temperature to the ADC.
>
> Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> Reviewed-by: Douglas Anderson <dianders@chromium.org>
> Signed-off-by: Matthias Kaehlcke <mka@chromium.org>

Double-SoB?

...presumably Andy can remove that when he lands and doesn't need a re-post...

-Doug

Re: [PATCH v2 3/3] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC

[Matthias Kaehlcke]

On Thu, Sep 06, 2018 at 02:10:43PM -0700, Doug Anderson wrote:
> Hi,
> 
> On Thu, Sep 6, 2018 at 2:04 PM, Matthias Kaehlcke <mka@chromium.org> wrote:
> > Add a channel node for the die temperature to the ADC.
> >
> > Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> > Reviewed-by: Douglas Anderson <dianders@chromium.org>
> > Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> 
> Double-SoB?

I must have run 'amend' with '-s' out of habit, which wasn't the right
thing to do in this case :/

> ...presumably Andy can remove that when he lands and doesn't need a re-post...

Andy, in case you need me to repost let me know.

Thanks

Matthias

Re: [PATCH v2 3/3] arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC

[Jonathan Cameron]

On Thu, 6 Sep 2018 14:22:06 -0700
Matthias Kaehlcke <mka@chromium.org> wrote:

> On Thu, Sep 06, 2018 at 02:10:43PM -0700, Doug Anderson wrote:
> > Hi,
> > 
> > On Thu, Sep 6, 2018 at 2:04 PM, Matthias Kaehlcke <mka@chromium.org> wrote:  
> > > Add a channel node for the die temperature to the ADC.
> > >
> > > Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> > > Reviewed-by: Douglas Anderson <dianders@chromium.org>
> > > Signed-off-by: Matthias Kaehlcke <mka@chromium.org>  
> > 
> > Double-SoB?  
> 
> I must have run 'amend' with '-s' out of habit, which wasn't the right
> thing to do in this case :/
> 
> > ...presumably Andy can remove that when he lands and doesn't need a re-post...  
> 
> Andy, in case you need me to repost let me know.
Slightly worse than that (as was patch 1).  You accidentally used
-- rather than --- to separate the change log.  So I ended up with

Signed-off-by: M..
Reviewed-by: ..
Signed-off-by: M..
--
Changelog

Signed-off-by: J....

Good think the double signed off was raised as chances are I wouldn't
have notice it.

Jonathan
> 
> Thanks
> 
> Matthias