* [PATCH] ARM: OMAP1: ams-delta: Fix impossible .irq < 0 [not found] <20181001102453.GA18947@mwanda> @ 2018-10-02 9:45 ` Janusz Krzysztofik 2018-10-02 17:47 ` Aaro Koskinen 0 siblings, 1 reply; 3+ messages in thread From: Janusz Krzysztofik @ 2018-10-02 9:45 UTC (permalink / raw) To: Tony Lindgren Cc: Aaro Koskinen, linux-arm-kernel, Dan Carpenter, linux-omap, linux-kernel, Janusz Krzysztofik Since the very beginning, unsigned int .irq member of struct plat_serial8250_port introduced by commit eff443df679e ("OMAP1: AMS_DELTA: add modem support") was statically initialized to a negative value -EINVAL. Moreover, commit 0812db943748 ("ARM: OMAP1: ams-delta: assign MODEM IRQ from GPIO descriptor") has introduced some new code which checks for that member carrying a negative value which is impossible. Use IRQ_NOTCONNECTED instead of -EINVAL. Also, drop the valueless check and let the modem device be registered regardless of .irq value, and the value handled by "serial8250" driver. Fixes: 0812db943748 ("ARM: OMAP1: ams-delta: assign MODEM IRQ from GPIO descriptor") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> --- arch/arm/mach-omap1/board-ams-delta.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index af318d958fd2..3d191fd52910 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -773,7 +773,7 @@ static struct plat_serial8250_port ams_delta_modem_ports[] = { { .membase = IOMEM(MODEM_VIRT), .mapbase = MODEM_PHYS, - .irq = -EINVAL, /* changed later */ + .irq = IRQ_NOTCONNECTED, /* changed later */ .flags = UPF_BOOT_AUTOCONF, .irqflags = IRQF_TRIGGER_RISING, .iotype = UPIO_MEM, @@ -864,8 +864,7 @@ static int __init modem_nreset_init(void) /* - * This function expects MODEM IRQ number already assigned to the port - * and fails if it's not. + * This function expects MODEM IRQ number already assigned to the port. * The MODEM device requires its RESET# pin kept high during probe. * That requirement can be fulfilled in several ways: * - with a descriptor of already functional modem_nreset regulator @@ -888,9 +887,6 @@ static int __init ams_delta_modem_init(void) if (!machine_is_ams_delta()) return -ENODEV; - if (ams_delta_modem_ports[0].irq < 0) - return ams_delta_modem_ports[0].irq; - omap_cfg_reg(M14_1510_GPIO2); /* Initialize the modem_nreset regulator consumer before use */ -- 2.16.4 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: OMAP1: ams-delta: Fix impossible .irq < 0 2018-10-02 9:45 ` [PATCH] ARM: OMAP1: ams-delta: Fix impossible .irq < 0 Janusz Krzysztofik @ 2018-10-02 17:47 ` Aaro Koskinen 2018-10-04 14:30 ` Tony Lindgren 0 siblings, 1 reply; 3+ messages in thread From: Aaro Koskinen @ 2018-10-02 17:47 UTC (permalink / raw) To: Janusz Krzysztofik Cc: Tony Lindgren, linux-arm-kernel, Dan Carpenter, linux-omap, linux-kernel Hi, On Tue, Oct 02, 2018 at 11:45:29AM +0200, Janusz Krzysztofik wrote: > Since the very beginning, unsigned int .irq member of struct > plat_serial8250_port introduced by commit eff443df679e ("OMAP1: > AMS_DELTA: add modem support") was statically initialized to a negative > value -EINVAL. Moreover, commit 0812db943748 ("ARM: OMAP1: ams-delta: > assign MODEM IRQ from GPIO descriptor") has introduced some new code > which checks for that member carrying a negative value which is > impossible. > > Use IRQ_NOTCONNECTED instead of -EINVAL. Also, drop the valueless check > and let the modem device be registered regardless of .irq value, and > the value handled by "serial8250" driver. > > Fixes: 0812db943748 ("ARM: OMAP1: ams-delta: assign MODEM IRQ from GPIO descriptor") > Reported-by: Dan Carpenter <dan.carpenter@oracle.com> > Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> A. ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] ARM: OMAP1: ams-delta: Fix impossible .irq < 0 2018-10-02 17:47 ` Aaro Koskinen @ 2018-10-04 14:30 ` Tony Lindgren 0 siblings, 0 replies; 3+ messages in thread From: Tony Lindgren @ 2018-10-04 14:30 UTC (permalink / raw) To: Aaro Koskinen Cc: Janusz Krzysztofik, linux-arm-kernel, Dan Carpenter, linux-omap, linux-kernel * Aaro Koskinen <aaro.koskinen@iki.fi> [181002 17:52]: > Hi, > > On Tue, Oct 02, 2018 at 11:45:29AM +0200, Janusz Krzysztofik wrote: > > Since the very beginning, unsigned int .irq member of struct > > plat_serial8250_port introduced by commit eff443df679e ("OMAP1: > > AMS_DELTA: add modem support") was statically initialized to a negative > > value -EINVAL. Moreover, commit 0812db943748 ("ARM: OMAP1: ams-delta: > > assign MODEM IRQ from GPIO descriptor") has introduced some new code > > which checks for that member carrying a negative value which is > > impossible. > > > > Use IRQ_NOTCONNECTED instead of -EINVAL. Also, drop the valueless check > > and let the modem device be registered regardless of .irq value, and > > the value handled by "serial8250" driver. > > > > Fixes: 0812db943748 ("ARM: OMAP1: ams-delta: assign MODEM IRQ from GPIO descriptor") > > Reported-by: Dan Carpenter <dan.carpenter@oracle.com> > > Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> > > Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Applying into omap-for-v4.20/omap1 thanks. Regards, Tony ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-10-04 14:30 UTC | newest] Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <20181001102453.GA18947@mwanda> 2018-10-02 9:45 ` [PATCH] ARM: OMAP1: ams-delta: Fix impossible .irq < 0 Janusz Krzysztofik 2018-10-02 17:47 ` Aaro Koskinen 2018-10-04 14:30 ` Tony Lindgren
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).