[PATCH net-next v3 0/2] net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt

[PATCH net-next v3 0/2] net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt

[Heiner Kallweit]

Flag PHY_HAS_INTERRUPT is used only here for this small check. I think
using interrupts isn't possible if a driver defines neither
config_intr nor ack_interrupts callback. So we can replace checking
flag PHY_HAS_INTERRUPT with checking for these callbacks.
This allows to remove this flag from all driver configs.

v2:
- add helper for check in patch 1
- remove PHY_HAS_INTERRUPT from all drivers, not only Realtek
- remove flag PHY_HAS_INTERRUPT completely

v3:
- rebase patch 2

Heiner Kallweit (2):
  net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt
  net: phy: realtek: remove flag PHY_HAS_INTERRUPT from driver configs

 drivers/net/phy/amd.c          |  1 -
 drivers/net/phy/aquantia.c     |  6 ------
 drivers/net/phy/at803x.c       |  3 ---
 drivers/net/phy/bcm63xx.c      |  4 ++--
 drivers/net/phy/bcm87xx.c      |  2 --
 drivers/net/phy/broadcom.c     | 16 ----------------
 drivers/net/phy/cicada.c       |  2 --
 drivers/net/phy/davicom.c      |  4 ----
 drivers/net/phy/dp83640.c      |  1 -
 drivers/net/phy/dp83822.c      |  1 -
 drivers/net/phy/dp83848.c      |  1 -
 drivers/net/phy/dp83867.c      |  1 -
 drivers/net/phy/dp83tc811.c    |  1 -
 drivers/net/phy/icplus.c       |  1 -
 drivers/net/phy/intel-xway.c   | 10 ----------
 drivers/net/phy/lxt.c          |  2 --
 drivers/net/phy/marvell.c      | 15 ---------------
 drivers/net/phy/meson-gxl.c    |  2 +-
 drivers/net/phy/micrel.c       | 14 --------------
 drivers/net/phy/microchip.c    |  1 -
 drivers/net/phy/microchip_t1.c |  1 -
 drivers/net/phy/mscc.c         |  6 ------
 drivers/net/phy/national.c     |  1 -
 drivers/net/phy/phy_device.c   |  8 ++++++--
 drivers/net/phy/qsemi.c        |  1 -
 drivers/net/phy/realtek.c      |  7 -------
 drivers/net/phy/smsc.c         |  7 +------
 drivers/net/phy/ste10Xp.c      |  2 --
 drivers/net/phy/vitesse.c      |  9 ---------
 include/linux/phy.h            |  5 ++---
 30 files changed, 12 insertions(+), 123 deletions(-)

-- 
2.19.1

[PATCH net-next v3 1/2] net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt

[Heiner Kallweit]

Flag PHY_HAS_INTERRUPT is used only here for this small check. I think
using interrupts isn't possible if a driver defines neither
config_intr nor ack_interrupts callback. So we can replace checking
flag PHY_HAS_INTERRUPT with checking for these callbacks.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
v2:
- add helper for the check
v3:
- no changes
---
 drivers/net/phy/phy_device.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index ab33d1777..00a46218c 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -2074,6 +2074,11 @@ static void of_set_phy_eee_broken(struct phy_device *phydev)
 	phydev->eee_broken_modes = broken;
 }
 
+static bool phy_drv_supports_irq(struct phy_driver *phydrv)
+{
+	return phydrv->config_intr || phydrv->ack_interrupt;
+}
+
 /**
  * phy_probe - probe and init a PHY device
  * @dev: device to probe and init
@@ -2095,8 +2100,7 @@ static int phy_probe(struct device *dev)
 	/* Disable the interrupt if the PHY doesn't support it
 	 * but the interrupt is still a valid one
 	 */
-	if (!(phydrv->flags & PHY_HAS_INTERRUPT) &&
-	    phy_interrupt_is_valid(phydev))
+	 if (!phy_drv_supports_irq(phydrv) && phy_interrupt_is_valid(phydev))
 		phydev->irq = PHY_POLL;
 
 	if (phydrv->flags & PHY_IS_INTERNAL)
-- 
2.19.1

Re: [PATCH net-next v3 1/2] net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt

[Andrew Lunn]

Hi Heiner

> +static bool phy_drv_supports_irq(struct phy_driver *phydrv)
> +{
> +	return phydrv->config_intr || phydrv->ack_interrupt;
> +}

Should this be && not || ? I thought both needed to be provided for
interrupts to work. 

	   Andrew

Re: [PATCH net-next v3 1/2] net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt

[Heiner Kallweit]

On 09.11.2018 21:13, Andrew Lunn wrote:
> Hi Heiner
> 
>> +static bool phy_drv_supports_irq(struct phy_driver *phydrv)
>> +{
>> +	return phydrv->config_intr || phydrv->ack_interrupt;
>> +}
> 
> Should this be && not || ? I thought both needed to be provided for
> interrupts to work. 
> 
> 	   Andrew
> 
I've seen at least one driver which configures interrupts in
config_init and doesn't define a config_intr callback
(ack_interrupt callback is there)
Intention of this check is not to ensure that the driver defines
everything to make interrupts work. All it states:
If at least one of the irq-related callbacks is defined, then
we interpret this as indicator that the PHY supports interrupts.

Heiner

Re: [PATCH net-next v3 1/2] net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt

[Florian Fainelli]

On 11/9/18 12:22 PM, Heiner Kallweit wrote:
> On 09.11.2018 21:13, Andrew Lunn wrote:
>> Hi Heiner
>>
>>> +static bool phy_drv_supports_irq(struct phy_driver *phydrv)
>>> +{
>>> +	return phydrv->config_intr || phydrv->ack_interrupt;
>>> +}
>>
>> Should this be && not || ? I thought both needed to be provided for
>> interrupts to work. 
>>
>> 	   Andrew
>>
> I've seen at least one driver which configures interrupts in
> config_init and doesn't define a config_intr callback
> (ack_interrupt callback is there)

That driver should probably be fixed, while it most likely does not make
any significant difference during probe/connect, since config_init() and
config_intr() are virtually happening at the same time, this is not
necessarily true when disconnecting from the PHY where we really want
config_intr() to effectively disable the interrupts and not leaving
something enabled that would now become unmaskable, because no more
driver attached.

> Intention of this check is not to ensure that the driver defines
> everything to make interrupts work. All it states:
> If at least one of the irq-related callbacks is defined, then
> we interpret this as indicator that the PHY supports interrupts.

I agree with Andrew here, that this should be an AND here, both
callbacks must be implemented for interrupts to work correctly.
-- 
Florian

Re: [PATCH net-next v3 1/2] net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt

[Heiner Kallweit]

On 09.11.2018 21:33, Florian Fainelli wrote:
> On 11/9/18 12:22 PM, Heiner Kallweit wrote:
>> On 09.11.2018 21:13, Andrew Lunn wrote:
>>> Hi Heiner
>>>
>>>> +static bool phy_drv_supports_irq(struct phy_driver *phydrv)
>>>> +{
>>>> +	return phydrv->config_intr || phydrv->ack_interrupt;
>>>> +}
>>>
>>> Should this be && not || ? I thought both needed to be provided for
>>> interrupts to work. 
>>>
>>> 	   Andrew
>>>
>> I've seen at least one driver which configures interrupts in
>> config_init and doesn't define a config_intr callback
>> (ack_interrupt callback is there)
> 
> That driver should probably be fixed, while it most likely does not make
> any significant difference during probe/connect, since config_init() and
> config_intr() are virtually happening at the same time, this is not
> necessarily true when disconnecting from the PHY where we really want
> config_intr() to effectively disable the interrupts and not leaving
> something enabled that would now become unmaskable, because no more
> driver attached.
> 
Found the driver: It's the IP101A/G in icplus.c
It should be easy to fix the behavior and move the interrupt config
to a config_intr callback. But the last real changes to the driver
have been done 6 years ago, so I'm not sure there's anybody out
there who can test.

>> Intention of this check is not to ensure that the driver defines
>> everything to make interrupts work. All it states:
>> If at least one of the irq-related callbacks is defined, then
>> we interpret this as indicator that the PHY supports interrupts.
> 
> I agree with Andrew here, that this should be an AND here, both
> callbacks must be implemented for interrupts to work correctly.
> 

Re: [PATCH net-next v3 1/2] net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt

[Martin Blumenstingl]

Hi Heiner,

On Fri, Nov 9, 2018 at 9:56 PM Heiner Kallweit <hkallweit1@gmail.com> wrote:
>
> On 09.11.2018 21:33, Florian Fainelli wrote:
> > On 11/9/18 12:22 PM, Heiner Kallweit wrote:
> >> On 09.11.2018 21:13, Andrew Lunn wrote:
> >>> Hi Heiner
> >>>
> >>>> +static bool phy_drv_supports_irq(struct phy_driver *phydrv)
> >>>> +{
> >>>> +  return phydrv->config_intr || phydrv->ack_interrupt;
> >>>> +}
> >>>
> >>> Should this be && not || ? I thought both needed to be provided for
> >>> interrupts to work.
> >>>
> >>>        Andrew
> >>>
> >> I've seen at least one driver which configures interrupts in
> >> config_init and doesn't define a config_intr callback
> >> (ack_interrupt callback is there)
> >
> > That driver should probably be fixed, while it most likely does not make
> > any significant difference during probe/connect, since config_init() and
> > config_intr() are virtually happening at the same time, this is not
> > necessarily true when disconnecting from the PHY where we really want
> > config_intr() to effectively disable the interrupts and not leaving
> > something enabled that would now become unmaskable, because no more
> > driver attached.
> >
> Found the driver: It's the IP101A/G in icplus.c
> It should be easy to fix the behavior and move the interrupt config
> to a config_intr callback. But the last real changes to the driver
> have been done 6 years ago, so I'm not sure there's anybody out
> there who can test.
if you want I can take care of the IP101A/G code.
I have at least one board with an IP101A/G (PHY ID: 0x02430c54,
according to the schematics it's an IP101GR-GP) where the interrupt is
routed to the SoC.

please let me know whether you'd like to work on it or if I should
give it a try.


Regards
Martin

Re: [PATCH net-next v3 1/2] net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt

[Heiner Kallweit]

On 12.11.2018 21:32, Martin Blumenstingl wrote:
> Hi Heiner,
> 
> On Fri, Nov 9, 2018 at 9:56 PM Heiner Kallweit <hkallweit1@gmail.com> wrote:
>>
>> On 09.11.2018 21:33, Florian Fainelli wrote:
>>> On 11/9/18 12:22 PM, Heiner Kallweit wrote:
>>>> On 09.11.2018 21:13, Andrew Lunn wrote:
>>>>> Hi Heiner
>>>>>
>>>>>> +static bool phy_drv_supports_irq(struct phy_driver *phydrv)
>>>>>> +{
>>>>>> +  return phydrv->config_intr || phydrv->ack_interrupt;
>>>>>> +}
>>>>>
>>>>> Should this be && not || ? I thought both needed to be provided for
>>>>> interrupts to work.
>>>>>
>>>>>        Andrew
>>>>>
>>>> I've seen at least one driver which configures interrupts in
>>>> config_init and doesn't define a config_intr callback
>>>> (ack_interrupt callback is there)
>>>
>>> That driver should probably be fixed, while it most likely does not make
>>> any significant difference during probe/connect, since config_init() and
>>> config_intr() are virtually happening at the same time, this is not
>>> necessarily true when disconnecting from the PHY where we really want
>>> config_intr() to effectively disable the interrupts and not leaving
>>> something enabled that would now become unmaskable, because no more
>>> driver attached.
>>>
>> Found the driver: It's the IP101A/G in icplus.c
>> It should be easy to fix the behavior and move the interrupt config
>> to a config_intr callback. But the last real changes to the driver
>> have been done 6 years ago, so I'm not sure there's anybody out
>> there who can test.
> if you want I can take care of the IP101A/G code.
> I have at least one board with an IP101A/G (PHY ID: 0x02430c54,
> according to the schematics it's an IP101GR-GP) where the interrupt is
> routed to the SoC.
> 
> please let me know whether you'd like to work on it or if I should
> give it a try.
> 
I made the change already based on the datasheet of IP101A LF which
is supposed to be register-compatible with IP101A/G.
The patch is not applied yet, you can find it in the mailing
list archive or in patchwork. Would be great if you could test it
and report problems or add a Tested-by.

> 
> Regards
> Martin
> 
Rgds, Heiner

Re: [PATCH net-next v3 1/2] net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt

[Martin Blumenstingl]

On Mon, Nov 12, 2018 at 9:38 PM Heiner Kallweit <hkallweit1@gmail.com> wrote:
>
> On 12.11.2018 21:32, Martin Blumenstingl wrote:
> > Hi Heiner,
> >
> > On Fri, Nov 9, 2018 at 9:56 PM Heiner Kallweit <hkallweit1@gmail.com> wrote:
> >>
> >> On 09.11.2018 21:33, Florian Fainelli wrote:
> >>> On 11/9/18 12:22 PM, Heiner Kallweit wrote:
> >>>> On 09.11.2018 21:13, Andrew Lunn wrote:
> >>>>> Hi Heiner
> >>>>>
> >>>>>> +static bool phy_drv_supports_irq(struct phy_driver *phydrv)
> >>>>>> +{
> >>>>>> +  return phydrv->config_intr || phydrv->ack_interrupt;
> >>>>>> +}
> >>>>>
> >>>>> Should this be && not || ? I thought both needed to be provided for
> >>>>> interrupts to work.
> >>>>>
> >>>>>        Andrew
> >>>>>
> >>>> I've seen at least one driver which configures interrupts in
> >>>> config_init and doesn't define a config_intr callback
> >>>> (ack_interrupt callback is there)
> >>>
> >>> That driver should probably be fixed, while it most likely does not make
> >>> any significant difference during probe/connect, since config_init() and
> >>> config_intr() are virtually happening at the same time, this is not
> >>> necessarily true when disconnecting from the PHY where we really want
> >>> config_intr() to effectively disable the interrupts and not leaving
> >>> something enabled that would now become unmaskable, because no more
> >>> driver attached.
> >>>
> >> Found the driver: It's the IP101A/G in icplus.c
> >> It should be easy to fix the behavior and move the interrupt config
> >> to a config_intr callback. But the last real changes to the driver
> >> have been done 6 years ago, so I'm not sure there's anybody out
> >> there who can test.
> > if you want I can take care of the IP101A/G code.
> > I have at least one board with an IP101A/G (PHY ID: 0x02430c54,
> > according to the schematics it's an IP101GR-GP) where the interrupt is
> > routed to the SoC.
> >
> > please let me know whether you'd like to work on it or if I should
> > give it a try.
> >
> I made the change already based on the datasheet of IP101A LF which
> is supposed to be register-compatible with IP101A/G.
> The patch is not applied yet, you can find it in the mailing
> list archive or in patchwork. Would be great if you could test it
> and report problems or add a Tested-by.
I will test it but I doubt it works out-of-the-box in my setup:
my board routes the RXER/INTR_32 pin of the IP101GR to the SoC. that
pin defaults to "RXER" (receive error signal). so I need to come up
with some extra patches which toggle the bit to output the interrupt
signal on that pin

in other words: I'll give your patches a try as soon as I have time
and give my Tested-by along with my extra patches on top of yours.


Regards
Martin

Re: [PATCH net-next v3 1/2] net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt

[Andrew Lunn]

On Fri, Nov 09, 2018 at 09:22:55PM +0100, Heiner Kallweit wrote:
> On 09.11.2018 21:13, Andrew Lunn wrote:
> > Hi Heiner
> > 
> >> +static bool phy_drv_supports_irq(struct phy_driver *phydrv)
> >> +{
> >> +	return phydrv->config_intr || phydrv->ack_interrupt;
> >> +}
> > 
> > Should this be && not || ? I thought both needed to be provided for
> > interrupts to work. 
> > 
> > 	   Andrew
> > 
> I've seen at least one driver which configures interrupts in
> config_init and doesn't define a config_intr callback
> (ack_interrupt callback is there)

> Intention of this check is not to ensure that the driver defines
> everything to make interrupts work. All it states:
> If at least one of the irq-related callbacks is defined, then
> we interpret this as indicator that the PHY supports interrupts.

I'm just wondering if that driver is broken if it enables interrupts
in config_init()? phylib deliberately enable/disable interrupts. If we
cannot do that, can we get an interrupt when we don't expect it? Can
we miss a state transition which would be reported when interrupts
would be re-enabled immediately triggering an interrupt?

Well, the current code does not seem to care if one is missing. So i
doubt this is making it more broken.

So,

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

[PATCH net-next v3 2/2] net: phy: remove flag PHY_HAS_INTERRUPT from driver configs

[Heiner Kallweit]

Now that flag PHY_HAS_INTERRUPT has been replaced with a check for
callbacks config_intr and ack_interrupt, we can remove setting this
flag from all driver configs.
Last but not least remove flag PHY_HAS_INTERRUPT completely.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
v2:
- remove flag from all driver configs, not only Realtek
- remove flag completely to prevent further use
v3:
- rebased
---
 drivers/net/phy/amd.c          |  1 -
 drivers/net/phy/aquantia.c     |  6 ------
 drivers/net/phy/at803x.c       |  3 ---
 drivers/net/phy/bcm63xx.c      |  4 ++--
 drivers/net/phy/bcm87xx.c      |  2 --
 drivers/net/phy/broadcom.c     | 16 ----------------
 drivers/net/phy/cicada.c       |  2 --
 drivers/net/phy/davicom.c      |  4 ----
 drivers/net/phy/dp83640.c      |  1 -
 drivers/net/phy/dp83822.c      |  1 -
 drivers/net/phy/dp83848.c      |  1 -
 drivers/net/phy/dp83867.c      |  1 -
 drivers/net/phy/dp83tc811.c    |  1 -
 drivers/net/phy/icplus.c       |  1 -
 drivers/net/phy/intel-xway.c   | 10 ----------
 drivers/net/phy/lxt.c          |  2 --
 drivers/net/phy/marvell.c      | 15 ---------------
 drivers/net/phy/meson-gxl.c    |  2 +-
 drivers/net/phy/micrel.c       | 14 --------------
 drivers/net/phy/microchip.c    |  1 -
 drivers/net/phy/microchip_t1.c |  1 -
 drivers/net/phy/mscc.c         |  6 ------
 drivers/net/phy/national.c     |  1 -
 drivers/net/phy/qsemi.c        |  1 -
 drivers/net/phy/realtek.c      |  7 -------
 drivers/net/phy/smsc.c         |  7 +------
 drivers/net/phy/ste10Xp.c      |  2 --
 drivers/net/phy/vitesse.c      |  9 ---------
 include/linux/phy.h            |  5 ++---
 29 files changed, 6 insertions(+), 121 deletions(-)

diff --git a/drivers/net/phy/amd.c b/drivers/net/phy/amd.c
index 6fe5dc920..9d0504f3e 100644
--- a/drivers/net/phy/amd.c
+++ b/drivers/net/phy/amd.c
@@ -66,7 +66,6 @@ static struct phy_driver am79c_driver[] = { {
 	.name		= "AM79C874",
 	.phy_id_mask	= 0xfffffff0,
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= am79c_config_init,
 	.ack_interrupt	= am79c_ack_interrupt,
 	.config_intr	= am79c_config_intr,
diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c
index 632472cab..efc0fbde9 100644
--- a/drivers/net/phy/aquantia.c
+++ b/drivers/net/phy/aquantia.c
@@ -116,7 +116,6 @@ static struct phy_driver aquantia_driver[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Aquantia AQ1202",
 	.features	= PHY_10GBIT_FULL_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.aneg_done	= genphy_c45_aneg_done,
 	.config_aneg    = aquantia_config_aneg,
 	.config_intr	= aquantia_config_intr,
@@ -128,7 +127,6 @@ static struct phy_driver aquantia_driver[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Aquantia AQ2104",
 	.features	= PHY_10GBIT_FULL_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.aneg_done	= genphy_c45_aneg_done,
 	.config_aneg    = aquantia_config_aneg,
 	.config_intr	= aquantia_config_intr,
@@ -140,7 +138,6 @@ static struct phy_driver aquantia_driver[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Aquantia AQR105",
 	.features	= PHY_10GBIT_FULL_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.aneg_done	= genphy_c45_aneg_done,
 	.config_aneg    = aquantia_config_aneg,
 	.config_intr	= aquantia_config_intr,
@@ -152,7 +149,6 @@ static struct phy_driver aquantia_driver[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Aquantia AQR106",
 	.features	= PHY_10GBIT_FULL_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.aneg_done	= genphy_c45_aneg_done,
 	.config_aneg    = aquantia_config_aneg,
 	.config_intr	= aquantia_config_intr,
@@ -164,7 +160,6 @@ static struct phy_driver aquantia_driver[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Aquantia AQR107",
 	.features	= PHY_10GBIT_FULL_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.aneg_done	= genphy_c45_aneg_done,
 	.config_aneg    = aquantia_config_aneg,
 	.config_intr	= aquantia_config_intr,
@@ -176,7 +171,6 @@ static struct phy_driver aquantia_driver[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Aquantia AQR405",
 	.features	= PHY_10GBIT_FULL_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.aneg_done	= genphy_c45_aneg_done,
 	.config_aneg    = aquantia_config_aneg,
 	.config_intr	= aquantia_config_intr,
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index e74a047a8..f9432d053 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -379,7 +379,6 @@ static struct phy_driver at803x_driver[] = {
 	.suspend		= at803x_suspend,
 	.resume			= at803x_resume,
 	.features		= PHY_GBIT_FEATURES,
-	.flags			= PHY_HAS_INTERRUPT,
 	.ack_interrupt		= at803x_ack_interrupt,
 	.config_intr		= at803x_config_intr,
 }, {
@@ -395,7 +394,6 @@ static struct phy_driver at803x_driver[] = {
 	.suspend		= at803x_suspend,
 	.resume			= at803x_resume,
 	.features		= PHY_BASIC_FEATURES,
-	.flags			= PHY_HAS_INTERRUPT,
 	.ack_interrupt		= at803x_ack_interrupt,
 	.config_intr		= at803x_config_intr,
 }, {
@@ -410,7 +408,6 @@ static struct phy_driver at803x_driver[] = {
 	.suspend		= at803x_suspend,
 	.resume			= at803x_resume,
 	.features		= PHY_GBIT_FEATURES,
-	.flags			= PHY_HAS_INTERRUPT,
 	.aneg_done		= at803x_aneg_done,
 	.ack_interrupt		= &at803x_ack_interrupt,
 	.config_intr		= &at803x_config_intr,
diff --git a/drivers/net/phy/bcm63xx.c b/drivers/net/phy/bcm63xx.c
index d95bffdec..6a547b87f 100644
--- a/drivers/net/phy/bcm63xx.c
+++ b/drivers/net/phy/bcm63xx.c
@@ -69,7 +69,7 @@ static struct phy_driver bcm63xx_driver[] = {
 	.phy_id_mask	= 0xfffffc00,
 	.name		= "Broadcom BCM63XX (1)",
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT | PHY_IS_INTERNAL,
+	.flags		= PHY_IS_INTERNAL,
 	.config_init	= bcm63xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm63xx_config_intr,
@@ -78,7 +78,7 @@ static struct phy_driver bcm63xx_driver[] = {
 	.phy_id		= 0x002bdc00,
 	.phy_id_mask	= 0xfffffc00,
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT | PHY_IS_INTERNAL,
+	.flags		= PHY_IS_INTERNAL,
 	.config_init	= bcm63xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm63xx_config_intr,
diff --git a/drivers/net/phy/bcm87xx.c b/drivers/net/phy/bcm87xx.c
index f7ebdcff5..64d5ba7bf 100644
--- a/drivers/net/phy/bcm87xx.c
+++ b/drivers/net/phy/bcm87xx.c
@@ -193,7 +193,6 @@ static struct phy_driver bcm87xx_driver[] = {
 	.phy_id		= PHY_ID_BCM8706,
 	.phy_id_mask	= 0xffffffff,
 	.name		= "Broadcom BCM8706",
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= bcm87xx_config_init,
 	.config_aneg	= bcm87xx_config_aneg,
 	.read_status	= bcm87xx_read_status,
@@ -205,7 +204,6 @@ static struct phy_driver bcm87xx_driver[] = {
 	.phy_id		= PHY_ID_BCM8727,
 	.phy_id_mask	= 0xffffffff,
 	.name		= "Broadcom BCM8727",
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= bcm87xx_config_init,
 	.config_aneg	= bcm87xx_config_aneg,
 	.read_status	= bcm87xx_read_status,
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 704537010..aa73c5cc5 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -602,7 +602,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM5411",
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= bcm54xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
@@ -611,7 +610,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM5421",
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= bcm54xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
@@ -620,7 +618,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM54210E",
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= bcm54xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
@@ -629,7 +626,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM5461",
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= bcm54xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
@@ -638,7 +634,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM54612E",
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= bcm54xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
@@ -647,7 +642,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM54616S",
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= bcm54xx_config_init,
 	.config_aneg	= bcm54616s_config_aneg,
 	.ack_interrupt	= bcm_phy_ack_intr,
@@ -657,7 +651,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM5464",
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= bcm54xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
@@ -666,7 +659,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM5481",
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= bcm54xx_config_init,
 	.config_aneg	= bcm5481_config_aneg,
 	.ack_interrupt	= bcm_phy_ack_intr,
@@ -676,7 +668,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.phy_id_mask    = 0xfffffff0,
 	.name           = "Broadcom BCM54810",
 	.features       = PHY_GBIT_FEATURES,
-	.flags          = PHY_HAS_INTERRUPT,
 	.config_init    = bcm54xx_config_init,
 	.config_aneg    = bcm5481_config_aneg,
 	.ack_interrupt  = bcm_phy_ack_intr,
@@ -686,7 +677,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM5482",
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= bcm5482_config_init,
 	.read_status	= bcm5482_read_status,
 	.ack_interrupt	= bcm_phy_ack_intr,
@@ -696,7 +686,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM50610",
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= bcm54xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
@@ -705,7 +694,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM50610M",
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= bcm54xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
@@ -714,7 +702,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM57780",
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= bcm54xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
 	.config_intr	= bcm_phy_config_intr,
@@ -723,7 +710,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCMAC131",
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= brcm_fet_config_init,
 	.ack_interrupt	= brcm_fet_ack_interrupt,
 	.config_intr	= brcm_fet_config_intr,
@@ -732,7 +718,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Broadcom BCM5241",
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= brcm_fet_config_init,
 	.ack_interrupt	= brcm_fet_ack_interrupt,
 	.config_intr	= brcm_fet_config_intr,
@@ -751,7 +736,6 @@ static struct phy_driver broadcom_drivers[] = {
 	.phy_id_mask    = 0xfffffff0,
 	.name           = "Broadcom BCM89610",
 	.features       = PHY_GBIT_FEATURES,
-	.flags          = PHY_HAS_INTERRUPT,
 	.config_init    = bcm54xx_config_init,
 	.ack_interrupt  = bcm_phy_ack_intr,
 	.config_intr    = bcm_phy_config_intr,
diff --git a/drivers/net/phy/cicada.c b/drivers/net/phy/cicada.c
index c05af00bf..fea61c81b 100644
--- a/drivers/net/phy/cicada.c
+++ b/drivers/net/phy/cicada.c
@@ -108,7 +108,6 @@ static struct phy_driver cis820x_driver[] = {
 	.name		= "Cicada Cis8201",
 	.phy_id_mask	= 0x000ffff0,
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= &cis820x_config_init,
 	.ack_interrupt	= &cis820x_ack_interrupt,
 	.config_intr	= &cis820x_config_intr,
@@ -117,7 +116,6 @@ static struct phy_driver cis820x_driver[] = {
 	.name		= "Cicada Cis8204",
 	.phy_id_mask	= 0x000fffc0,
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= &cis820x_config_init,
 	.ack_interrupt	= &cis820x_ack_interrupt,
 	.config_intr	= &cis820x_config_intr,
diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c
index 5ee99b3b4..97162008f 100644
--- a/drivers/net/phy/davicom.c
+++ b/drivers/net/phy/davicom.c
@@ -150,7 +150,6 @@ static struct phy_driver dm91xx_driver[] = {
 	.name		= "Davicom DM9161E",
 	.phy_id_mask	= 0x0ffffff0,
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= dm9161_config_init,
 	.config_aneg	= dm9161_config_aneg,
 	.ack_interrupt	= dm9161_ack_interrupt,
@@ -160,7 +159,6 @@ static struct phy_driver dm91xx_driver[] = {
 	.name		= "Davicom DM9161B/C",
 	.phy_id_mask	= 0x0ffffff0,
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= dm9161_config_init,
 	.config_aneg	= dm9161_config_aneg,
 	.ack_interrupt	= dm9161_ack_interrupt,
@@ -170,7 +168,6 @@ static struct phy_driver dm91xx_driver[] = {
 	.name		= "Davicom DM9161A",
 	.phy_id_mask	= 0x0ffffff0,
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= dm9161_config_init,
 	.config_aneg	= dm9161_config_aneg,
 	.ack_interrupt	= dm9161_ack_interrupt,
@@ -180,7 +177,6 @@ static struct phy_driver dm91xx_driver[] = {
 	.name		= "Davicom DM9131",
 	.phy_id_mask	= 0x0ffffff0,
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.ack_interrupt	= dm9161_ack_interrupt,
 	.config_intr	= dm9161_config_intr,
 } };
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index edd4d44a3..18b41bc34 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -1521,7 +1521,6 @@ static struct phy_driver dp83640_driver = {
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "NatSemi DP83640",
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.probe		= dp83640_probe,
 	.remove		= dp83640_remove,
 	.soft_reset	= dp83640_soft_reset,
diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index 6e8a2a4f3..24c7f149f 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -318,7 +318,6 @@ static struct phy_driver dp83822_driver[] = {
 		.phy_id_mask = 0xfffffff0,
 		.name = "TI DP83822",
 		.features = PHY_BASIC_FEATURES,
-		.flags = PHY_HAS_INTERRUPT,
 		.config_init = dp83822_config_init,
 		.soft_reset = dp83822_phy_reset,
 		.get_wol = dp83822_get_wol,
diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c
index 6e8e42361..a6b55909d 100644
--- a/drivers/net/phy/dp83848.c
+++ b/drivers/net/phy/dp83848.c
@@ -108,7 +108,6 @@ MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
 		.phy_id_mask	= 0xfffffff0,			\
 		.name		= _name,			\
 		.features	= PHY_BASIC_FEATURES,		\
-		.flags		= PHY_HAS_INTERRUPT,		\
 								\
 		.soft_reset	= genphy_soft_reset,		\
 		.config_init	= _config_init,			\
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index b3935778b..da6a67d47 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -334,7 +334,6 @@ static struct phy_driver dp83867_driver[] = {
 		.phy_id_mask	= 0xfffffff0,
 		.name		= "TI DP83867",
 		.features	= PHY_GBIT_FEATURES,
-		.flags		= PHY_HAS_INTERRUPT,
 
 		.config_init	= dp83867_config_init,
 		.soft_reset	= dp83867_phy_reset,
diff --git a/drivers/net/phy/dp83tc811.c b/drivers/net/phy/dp83tc811.c
index 78cad134a..da1335699 100644
--- a/drivers/net/phy/dp83tc811.c
+++ b/drivers/net/phy/dp83tc811.c
@@ -346,7 +346,6 @@ static struct phy_driver dp83811_driver[] = {
 		.phy_id_mask = 0xfffffff0,
 		.name = "TI DP83TC811",
 		.features = PHY_BASIC_FEATURES,
-		.flags = PHY_HAS_INTERRUPT,
 		.config_init = dp83811_config_init,
 		.config_aneg = dp83811_config_aneg,
 		.soft_reset = dp83811_phy_reset,
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index 791587a49..21ce68964 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -234,7 +234,6 @@ static struct phy_driver icplus_driver[] = {
 	.name		= "ICPlus IP101A/G",
 	.phy_id_mask	= 0x0ffffff0,
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.ack_interrupt	= ip101a_g_ack_interrupt,
 	.config_init	= &ip101a_g_config_init,
 	.suspend	= genphy_suspend,
diff --git a/drivers/net/phy/intel-xway.c b/drivers/net/phy/intel-xway.c
index 7d936fb61..fc0f5024a 100644
--- a/drivers/net/phy/intel-xway.c
+++ b/drivers/net/phy/intel-xway.c
@@ -242,7 +242,6 @@ static struct phy_driver xway_gphy[] = {
 		.phy_id_mask	= 0xffffffff,
 		.name		= "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.3",
 		.features	= PHY_GBIT_FEATURES,
-		.flags		= PHY_HAS_INTERRUPT,
 		.config_init	= xway_gphy_config_init,
 		.config_aneg	= xway_gphy14_config_aneg,
 		.ack_interrupt	= xway_gphy_ack_interrupt,
@@ -255,7 +254,6 @@ static struct phy_driver xway_gphy[] = {
 		.phy_id_mask	= 0xffffffff,
 		.name		= "Intel XWAY PHY22F (PEF 7061) v1.3",
 		.features	= PHY_BASIC_FEATURES,
-		.flags		= PHY_HAS_INTERRUPT,
 		.config_init	= xway_gphy_config_init,
 		.config_aneg	= xway_gphy14_config_aneg,
 		.ack_interrupt	= xway_gphy_ack_interrupt,
@@ -268,7 +266,6 @@ static struct phy_driver xway_gphy[] = {
 		.phy_id_mask	= 0xffffffff,
 		.name		= "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.4",
 		.features	= PHY_GBIT_FEATURES,
-		.flags		= PHY_HAS_INTERRUPT,
 		.config_init	= xway_gphy_config_init,
 		.config_aneg	= xway_gphy14_config_aneg,
 		.ack_interrupt	= xway_gphy_ack_interrupt,
@@ -281,7 +278,6 @@ static struct phy_driver xway_gphy[] = {
 		.phy_id_mask	= 0xffffffff,
 		.name		= "Intel XWAY PHY22F (PEF 7061) v1.4",
 		.features	= PHY_BASIC_FEATURES,
-		.flags		= PHY_HAS_INTERRUPT,
 		.config_init	= xway_gphy_config_init,
 		.config_aneg	= xway_gphy14_config_aneg,
 		.ack_interrupt	= xway_gphy_ack_interrupt,
@@ -294,7 +290,6 @@ static struct phy_driver xway_gphy[] = {
 		.phy_id_mask	= 0xffffffff,
 		.name		= "Intel XWAY PHY11G (PEF 7071/PEF 7072) v1.5 / v1.6",
 		.features	= PHY_GBIT_FEATURES,
-		.flags		= PHY_HAS_INTERRUPT,
 		.config_init	= xway_gphy_config_init,
 		.ack_interrupt	= xway_gphy_ack_interrupt,
 		.did_interrupt	= xway_gphy_did_interrupt,
@@ -306,7 +301,6 @@ static struct phy_driver xway_gphy[] = {
 		.phy_id_mask	= 0xffffffff,
 		.name		= "Intel XWAY PHY22F (PEF 7061) v1.5 / v1.6",
 		.features	= PHY_BASIC_FEATURES,
-		.flags		= PHY_HAS_INTERRUPT,
 		.config_init	= xway_gphy_config_init,
 		.ack_interrupt	= xway_gphy_ack_interrupt,
 		.did_interrupt	= xway_gphy_did_interrupt,
@@ -318,7 +312,6 @@ static struct phy_driver xway_gphy[] = {
 		.phy_id_mask	= 0xffffffff,
 		.name		= "Intel XWAY PHY11G (xRX v1.1 integrated)",
 		.features	= PHY_GBIT_FEATURES,
-		.flags		= PHY_HAS_INTERRUPT,
 		.config_init	= xway_gphy_config_init,
 		.ack_interrupt	= xway_gphy_ack_interrupt,
 		.did_interrupt	= xway_gphy_did_interrupt,
@@ -330,7 +323,6 @@ static struct phy_driver xway_gphy[] = {
 		.phy_id_mask	= 0xffffffff,
 		.name		= "Intel XWAY PHY22F (xRX v1.1 integrated)",
 		.features	= PHY_BASIC_FEATURES,
-		.flags		= PHY_HAS_INTERRUPT,
 		.config_init	= xway_gphy_config_init,
 		.ack_interrupt	= xway_gphy_ack_interrupt,
 		.did_interrupt	= xway_gphy_did_interrupt,
@@ -342,7 +334,6 @@ static struct phy_driver xway_gphy[] = {
 		.phy_id_mask	= 0xffffffff,
 		.name		= "Intel XWAY PHY11G (xRX v1.2 integrated)",
 		.features	= PHY_GBIT_FEATURES,
-		.flags		= PHY_HAS_INTERRUPT,
 		.config_init	= xway_gphy_config_init,
 		.ack_interrupt	= xway_gphy_ack_interrupt,
 		.did_interrupt	= xway_gphy_did_interrupt,
@@ -354,7 +345,6 @@ static struct phy_driver xway_gphy[] = {
 		.phy_id_mask	= 0xffffffff,
 		.name		= "Intel XWAY PHY22F (xRX v1.2 integrated)",
 		.features	= PHY_BASIC_FEATURES,
-		.flags		= PHY_HAS_INTERRUPT,
 		.config_init	= xway_gphy_config_init,
 		.ack_interrupt	= xway_gphy_ack_interrupt,
 		.did_interrupt	= xway_gphy_did_interrupt,
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c
index c14b254b2..c9e2c84c2 100644
--- a/drivers/net/phy/lxt.c
+++ b/drivers/net/phy/lxt.c
@@ -257,7 +257,6 @@ static struct phy_driver lxt97x_driver[] = {
 	.name		= "LXT970",
 	.phy_id_mask	= 0xfffffff0,
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= lxt970_config_init,
 	.ack_interrupt	= lxt970_ack_interrupt,
 	.config_intr	= lxt970_config_intr,
@@ -266,7 +265,6 @@ static struct phy_driver lxt97x_driver[] = {
 	.name		= "LXT971",
 	.phy_id_mask	= 0xfffffff0,
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.ack_interrupt	= lxt971_ack_interrupt,
 	.config_intr	= lxt971_config_intr,
 }, {
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index cbec29610..463c616a7 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -2005,7 +2005,6 @@ static struct phy_driver marvell_drivers[] = {
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1101",
 		.features = PHY_GBIT_FEATURES,
-		.flags = PHY_HAS_INTERRUPT,
 		.probe = marvell_probe,
 		.config_init = &marvell_config_init,
 		.config_aneg = &m88e1101_config_aneg,
@@ -2024,7 +2023,6 @@ static struct phy_driver marvell_drivers[] = {
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1112",
 		.features = PHY_GBIT_FEATURES,
-		.flags = PHY_HAS_INTERRUPT,
 		.probe = marvell_probe,
 		.config_init = &m88e1111_config_init,
 		.config_aneg = &marvell_config_aneg,
@@ -2043,7 +2041,6 @@ static struct phy_driver marvell_drivers[] = {
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1111",
 		.features = PHY_GBIT_FEATURES,
-		.flags = PHY_HAS_INTERRUPT,
 		.probe = marvell_probe,
 		.config_init = &m88e1111_config_init,
 		.config_aneg = &marvell_config_aneg,
@@ -2063,7 +2060,6 @@ static struct phy_driver marvell_drivers[] = {
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1118",
 		.features = PHY_GBIT_FEATURES,
-		.flags = PHY_HAS_INTERRUPT,
 		.probe = marvell_probe,
 		.config_init = &m88e1118_config_init,
 		.config_aneg = &m88e1118_config_aneg,
@@ -2082,7 +2078,6 @@ static struct phy_driver marvell_drivers[] = {
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1121R",
 		.features = PHY_GBIT_FEATURES,
-		.flags = PHY_HAS_INTERRUPT,
 		.probe = &m88e1121_probe,
 		.config_init = &marvell_config_init,
 		.config_aneg = &m88e1121_config_aneg,
@@ -2103,7 +2098,6 @@ static struct phy_driver marvell_drivers[] = {
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1318S",
 		.features = PHY_GBIT_FEATURES,
-		.flags = PHY_HAS_INTERRUPT,
 		.probe = marvell_probe,
 		.config_init = &m88e1318_config_init,
 		.config_aneg = &m88e1318_config_aneg,
@@ -2126,7 +2120,6 @@ static struct phy_driver marvell_drivers[] = {
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1145",
 		.features = PHY_GBIT_FEATURES,
-		.flags = PHY_HAS_INTERRUPT,
 		.probe = marvell_probe,
 		.config_init = &m88e1145_config_init,
 		.config_aneg = &m88e1101_config_aneg,
@@ -2146,7 +2139,6 @@ static struct phy_driver marvell_drivers[] = {
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1149R",
 		.features = PHY_GBIT_FEATURES,
-		.flags = PHY_HAS_INTERRUPT,
 		.probe = marvell_probe,
 		.config_init = &m88e1149_config_init,
 		.config_aneg = &m88e1118_config_aneg,
@@ -2165,7 +2157,6 @@ static struct phy_driver marvell_drivers[] = {
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1240",
 		.features = PHY_GBIT_FEATURES,
-		.flags = PHY_HAS_INTERRUPT,
 		.probe = marvell_probe,
 		.config_init = &m88e1111_config_init,
 		.config_aneg = &marvell_config_aneg,
@@ -2184,7 +2175,6 @@ static struct phy_driver marvell_drivers[] = {
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1116R",
 		.features = PHY_GBIT_FEATURES,
-		.flags = PHY_HAS_INTERRUPT,
 		.probe = marvell_probe,
 		.config_init = &m88e1116r_config_init,
 		.ack_interrupt = &marvell_ack_interrupt,
@@ -2202,7 +2192,6 @@ static struct phy_driver marvell_drivers[] = {
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1510",
 		.features = PHY_GBIT_FIBRE_FEATURES,
-		.flags = PHY_HAS_INTERRUPT,
 		.probe = &m88e1510_probe,
 		.config_init = &m88e1510_config_init,
 		.config_aneg = &m88e1510_config_aneg,
@@ -2226,7 +2215,6 @@ static struct phy_driver marvell_drivers[] = {
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1540",
 		.features = PHY_GBIT_FEATURES,
-		.flags = PHY_HAS_INTERRUPT,
 		.probe = m88e1510_probe,
 		.config_init = &marvell_config_init,
 		.config_aneg = &m88e1510_config_aneg,
@@ -2248,7 +2236,6 @@ static struct phy_driver marvell_drivers[] = {
 		.name = "Marvell 88E1545",
 		.probe = m88e1510_probe,
 		.features = PHY_GBIT_FEATURES,
-		.flags = PHY_HAS_INTERRUPT,
 		.config_init = &marvell_config_init,
 		.config_aneg = &m88e1510_config_aneg,
 		.read_status = &marvell_read_status,
@@ -2268,7 +2255,6 @@ static struct phy_driver marvell_drivers[] = {
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E3016",
 		.features = PHY_BASIC_FEATURES,
-		.flags = PHY_HAS_INTERRUPT,
 		.probe = marvell_probe,
 		.config_init = &m88e3016_config_init,
 		.aneg_done = &marvell_aneg_done,
@@ -2289,7 +2275,6 @@ static struct phy_driver marvell_drivers[] = {
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E6390",
 		.features = PHY_GBIT_FEATURES,
-		.flags = PHY_HAS_INTERRUPT,
 		.probe = m88e6390_probe,
 		.config_init = &marvell_config_init,
 		.config_aneg = &m88e1510_config_aneg,
diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c
index ddc2c5ea3..b03bcf2c3 100644
--- a/drivers/net/phy/meson-gxl.c
+++ b/drivers/net/phy/meson-gxl.c
@@ -232,7 +232,7 @@ static struct phy_driver meson_gxl_phy[] = {
 		.phy_id_mask	= 0xfffffff0,
 		.name		= "Meson GXL Internal PHY",
 		.features	= PHY_BASIC_FEATURES,
-		.flags		= PHY_IS_INTERNAL | PHY_HAS_INTERRUPT,
+		.flags		= PHY_IS_INTERNAL,
 		.config_init	= meson_gxl_config_init,
 		.aneg_done      = genphy_aneg_done,
 		.read_status	= meson_gxl_read_status,
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 9265dea79..cb5783905 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -918,7 +918,6 @@ static struct phy_driver ksphy_driver[] = {
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.name		= "Micrel KS8737",
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.driver_data	= &ks8737_type,
 	.config_init	= kszphy_config_init,
 	.ack_interrupt	= kszphy_ack_interrupt,
@@ -930,7 +929,6 @@ static struct phy_driver ksphy_driver[] = {
 	.phy_id_mask	= 0x00ffffff,
 	.name		= "Micrel KSZ8021 or KSZ8031",
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.driver_data	= &ksz8021_type,
 	.probe		= kszphy_probe,
 	.config_init	= kszphy_config_init,
@@ -946,7 +944,6 @@ static struct phy_driver ksphy_driver[] = {
 	.phy_id_mask	= 0x00ffffff,
 	.name		= "Micrel KSZ8031",
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.driver_data	= &ksz8021_type,
 	.probe		= kszphy_probe,
 	.config_init	= kszphy_config_init,
@@ -962,7 +959,6 @@ static struct phy_driver ksphy_driver[] = {
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.name		= "Micrel KSZ8041",
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.driver_data	= &ksz8041_type,
 	.probe		= kszphy_probe,
 	.config_init	= ksz8041_config_init,
@@ -979,7 +975,6 @@ static struct phy_driver ksphy_driver[] = {
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.name		= "Micrel KSZ8041RNLI",
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.driver_data	= &ksz8041_type,
 	.probe		= kszphy_probe,
 	.config_init	= kszphy_config_init,
@@ -995,7 +990,6 @@ static struct phy_driver ksphy_driver[] = {
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.name		= "Micrel KSZ8051",
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.driver_data	= &ksz8051_type,
 	.probe		= kszphy_probe,
 	.config_init	= kszphy_config_init,
@@ -1011,7 +1005,6 @@ static struct phy_driver ksphy_driver[] = {
 	.name		= "Micrel KSZ8001 or KS8721",
 	.phy_id_mask	= 0x00fffffc,
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.driver_data	= &ksz8041_type,
 	.probe		= kszphy_probe,
 	.config_init	= kszphy_config_init,
@@ -1027,7 +1020,6 @@ static struct phy_driver ksphy_driver[] = {
 	.name		= "Micrel KSZ8081 or KSZ8091",
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.driver_data	= &ksz8081_type,
 	.probe		= kszphy_probe,
 	.config_init	= kszphy_config_init,
@@ -1043,7 +1035,6 @@ static struct phy_driver ksphy_driver[] = {
 	.name		= "Micrel KSZ8061",
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= kszphy_config_init,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
@@ -1054,7 +1045,6 @@ static struct phy_driver ksphy_driver[] = {
 	.phy_id_mask	= 0x000ffffe,
 	.name		= "Micrel KSZ9021 Gigabit PHY",
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.driver_data	= &ksz9021_type,
 	.probe		= kszphy_probe,
 	.config_init	= ksz9021_config_init,
@@ -1072,7 +1062,6 @@ static struct phy_driver ksphy_driver[] = {
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.name		= "Micrel KSZ9031 Gigabit PHY",
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.driver_data	= &ksz9021_type,
 	.probe		= kszphy_probe,
 	.config_init	= ksz9031_config_init,
@@ -1089,7 +1078,6 @@ static struct phy_driver ksphy_driver[] = {
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.name		= "Microchip KSZ9131 Gigabit PHY",
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.driver_data	= &ksz9021_type,
 	.probe		= kszphy_probe,
 	.config_init	= ksz9131_config_init,
@@ -1115,7 +1103,6 @@ static struct phy_driver ksphy_driver[] = {
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.name		= "Micrel KSZ886X Switch",
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= kszphy_config_init,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
@@ -1124,7 +1111,6 @@ static struct phy_driver ksphy_driver[] = {
 	.phy_id_mask	= MICREL_PHY_ID_MASK,
 	.name		= "Micrel KSZ8795",
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= kszphy_config_init,
 	.config_aneg	= ksz8873mll_config_aneg,
 	.read_status	= ksz8873mll_read_status,
diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
index 04b12e34d..7557bebd5 100644
--- a/drivers/net/phy/microchip.c
+++ b/drivers/net/phy/microchip.c
@@ -346,7 +346,6 @@ static struct phy_driver microchip_phy_driver[] = {
 	.name		= "Microchip LAN88xx",
 
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 
 	.probe		= lan88xx_probe,
 	.remove		= lan88xx_remove,
diff --git a/drivers/net/phy/microchip_t1.c b/drivers/net/phy/microchip_t1.c
index c600a8509..3d09b4716 100644
--- a/drivers/net/phy/microchip_t1.c
+++ b/drivers/net/phy/microchip_t1.c
@@ -47,7 +47,6 @@ static struct phy_driver microchip_t1_phy_driver[] = {
 		.name           = "Microchip LAN87xx T1",
 
 		.features       = PHY_BASIC_T1_FEATURES,
-		.flags          = PHY_HAS_INTERRUPT,
 
 		.config_init    = genphy_config_init,
 		.config_aneg    = genphy_config_aneg,
diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
index a2e59f4f6..62269e578 100644
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c
@@ -1833,7 +1833,6 @@ static struct phy_driver vsc85xx_driver[] = {
 	.name		= "Microsemi FE VSC8530",
 	.phy_id_mask	= 0xfffffff0,
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.soft_reset	= &genphy_soft_reset,
 	.config_init	= &vsc85xx_config_init,
 	.config_aneg    = &vsc85xx_config_aneg,
@@ -1859,7 +1858,6 @@ static struct phy_driver vsc85xx_driver[] = {
 	.name		= "Microsemi VSC8531",
 	.phy_id_mask    = 0xfffffff0,
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc85xx_config_init,
 	.config_aneg    = &vsc85xx_config_aneg,
@@ -1885,7 +1883,6 @@ static struct phy_driver vsc85xx_driver[] = {
 	.name		= "Microsemi FE VSC8540 SyncE",
 	.phy_id_mask	= 0xfffffff0,
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.soft_reset	= &genphy_soft_reset,
 	.config_init	= &vsc85xx_config_init,
 	.config_aneg	= &vsc85xx_config_aneg,
@@ -1911,7 +1908,6 @@ static struct phy_driver vsc85xx_driver[] = {
 	.name		= "Microsemi VSC8541 SyncE",
 	.phy_id_mask    = 0xfffffff0,
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc85xx_config_init,
 	.config_aneg    = &vsc85xx_config_aneg,
@@ -1937,7 +1933,6 @@ static struct phy_driver vsc85xx_driver[] = {
 	.name		= "Microsemi GE VSC8574 SyncE",
 	.phy_id_mask	= 0xfffffff0,
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc8584_config_init,
 	.config_aneg    = &vsc85xx_config_aneg,
@@ -1964,7 +1959,6 @@ static struct phy_driver vsc85xx_driver[] = {
 	.name		= "Microsemi GE VSC8584 SyncE",
 	.phy_id_mask	= 0xfffffff0,
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc8584_config_init,
 	.config_aneg    = &vsc85xx_config_aneg,
diff --git a/drivers/net/phy/national.c b/drivers/net/phy/national.c
index 2b1e33696..139bed2c8 100644
--- a/drivers/net/phy/national.c
+++ b/drivers/net/phy/national.c
@@ -134,7 +134,6 @@ static struct phy_driver dp83865_driver[] = { {
 	.phy_id_mask = 0xfffffff0,
 	.name = "NatSemi DP83865",
 	.features = PHY_GBIT_FEATURES,
-	.flags = PHY_HAS_INTERRUPT,
 	.config_init = ns_config_init,
 	.ack_interrupt = ns_ack_interrupt,
 	.config_intr = ns_config_intr,
diff --git a/drivers/net/phy/qsemi.c b/drivers/net/phy/qsemi.c
index 889a4dce1..cfe2313db 100644
--- a/drivers/net/phy/qsemi.c
+++ b/drivers/net/phy/qsemi.c
@@ -116,7 +116,6 @@ static struct phy_driver qs6612_driver[] = { {
 	.name		= "QS6612",
 	.phy_id_mask	= 0xfffffff0,
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= qs6612_config_init,
 	.ack_interrupt	= qs6612_ack_interrupt,
 	.config_intr	= qs6612_config_intr,
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 7b1c89b38..0f8e5b1c9 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -217,13 +217,11 @@ static struct phy_driver realtek_drvs[] = {
 		.name           = "RTL8201CP Ethernet",
 		.phy_id_mask    = 0x0000ffff,
 		.features       = PHY_BASIC_FEATURES,
-		.flags          = PHY_HAS_INTERRUPT,
 	}, {
 		.phy_id		= 0x001cc816,
 		.name		= "RTL8201F Fast Ethernet",
 		.phy_id_mask	= 0x001fffff,
 		.features	= PHY_BASIC_FEATURES,
-		.flags		= PHY_HAS_INTERRUPT,
 		.ack_interrupt	= &rtl8201_ack_interrupt,
 		.config_intr	= &rtl8201_config_intr,
 		.suspend	= genphy_suspend,
@@ -243,7 +241,6 @@ static struct phy_driver realtek_drvs[] = {
 		.name		= "RTL8211B Gigabit Ethernet",
 		.phy_id_mask	= 0x001fffff,
 		.features	= PHY_GBIT_FEATURES,
-		.flags		= PHY_HAS_INTERRUPT,
 		.ack_interrupt	= &rtl821x_ack_interrupt,
 		.config_intr	= &rtl8211b_config_intr,
 		.read_mmd	= &genphy_read_mmd_unsupported,
@@ -263,7 +260,6 @@ static struct phy_driver realtek_drvs[] = {
 		.name		= "RTL8211DN Gigabit Ethernet",
 		.phy_id_mask	= 0x001fffff,
 		.features	= PHY_GBIT_FEATURES,
-		.flags		= PHY_HAS_INTERRUPT,
 		.ack_interrupt	= rtl821x_ack_interrupt,
 		.config_intr	= rtl8211e_config_intr,
 		.suspend	= genphy_suspend,
@@ -273,7 +269,6 @@ static struct phy_driver realtek_drvs[] = {
 		.name		= "RTL8211E Gigabit Ethernet",
 		.phy_id_mask	= 0x001fffff,
 		.features	= PHY_GBIT_FEATURES,
-		.flags		= PHY_HAS_INTERRUPT,
 		.ack_interrupt	= &rtl821x_ack_interrupt,
 		.config_intr	= &rtl8211e_config_intr,
 		.suspend	= genphy_suspend,
@@ -283,7 +278,6 @@ static struct phy_driver realtek_drvs[] = {
 		.name		= "RTL8211F Gigabit Ethernet",
 		.phy_id_mask	= 0x001fffff,
 		.features	= PHY_GBIT_FEATURES,
-		.flags		= PHY_HAS_INTERRUPT,
 		.config_init	= &rtl8211f_config_init,
 		.ack_interrupt	= &rtl8211f_ack_interrupt,
 		.config_intr	= &rtl8211f_config_intr,
@@ -296,7 +290,6 @@ static struct phy_driver realtek_drvs[] = {
 		.name		= "RTL8366RB Gigabit Ethernet",
 		.phy_id_mask	= 0x001fffff,
 		.features	= PHY_GBIT_FEATURES,
-		.flags		= PHY_HAS_INTERRUPT,
 		.config_init	= &rtl8366rb_config_init,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index c32820838..f9477ff55 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -219,7 +219,6 @@ static struct phy_driver smsc_phy_driver[] = {
 	.name		= "SMSC LAN83C185",
 
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 
 	.probe		= smsc_phy_probe,
 
@@ -239,7 +238,6 @@ static struct phy_driver smsc_phy_driver[] = {
 	.name		= "SMSC LAN8187",
 
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 
 	.probe		= smsc_phy_probe,
 
@@ -264,7 +262,6 @@ static struct phy_driver smsc_phy_driver[] = {
 	.name		= "SMSC LAN8700",
 
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 
 	.probe		= smsc_phy_probe,
 
@@ -290,7 +287,6 @@ static struct phy_driver smsc_phy_driver[] = {
 	.name		= "SMSC LAN911x Internal PHY",
 
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 
 	.probe		= smsc_phy_probe,
 
@@ -309,7 +305,7 @@ static struct phy_driver smsc_phy_driver[] = {
 	.name		= "SMSC LAN8710/LAN8720",
 
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT | PHY_RST_AFTER_CLK_EN,
+	.flags		= PHY_RST_AFTER_CLK_EN,
 
 	.probe		= smsc_phy_probe,
 
@@ -335,7 +331,6 @@ static struct phy_driver smsc_phy_driver[] = {
 	.name		= "SMSC LAN8740",
 
 	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 
 	.probe		= smsc_phy_probe,
 
diff --git a/drivers/net/phy/ste10Xp.c b/drivers/net/phy/ste10Xp.c
index 2fe9a87b5..33d733684 100644
--- a/drivers/net/phy/ste10Xp.c
+++ b/drivers/net/phy/ste10Xp.c
@@ -87,7 +87,6 @@ static struct phy_driver ste10xp_pdriver[] = {
 	.phy_id_mask = 0xfffffff0,
 	.name = "STe101p",
 	.features = PHY_BASIC_FEATURES,
-	.flags = PHY_HAS_INTERRUPT,
 	.config_init = ste10Xp_config_init,
 	.ack_interrupt = ste10Xp_ack_interrupt,
 	.config_intr = ste10Xp_config_intr,
@@ -98,7 +97,6 @@ static struct phy_driver ste10xp_pdriver[] = {
 	.phy_id_mask = 0xffffffff,
 	.name = "STe100p",
 	.features = PHY_BASIC_FEATURES,
-	.flags = PHY_HAS_INTERRUPT,
 	.config_init = ste10Xp_config_init,
 	.ack_interrupt = ste10Xp_ack_interrupt,
 	.config_intr = ste10Xp_config_intr,
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index fbf9ad429..4ca513feb 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -399,7 +399,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.name           = "Vitesse VSC8234",
 	.phy_id_mask    = 0x000ffff0,
 	.features       = PHY_GBIT_FEATURES,
-	.flags          = PHY_HAS_INTERRUPT,
 	.config_init    = &vsc824x_config_init,
 	.config_aneg    = &vsc82x4_config_aneg,
 	.ack_interrupt  = &vsc824x_ack_interrupt,
@@ -409,7 +408,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.name		= "Vitesse VSC8244",
 	.phy_id_mask	= 0x000fffc0,
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= &vsc824x_config_init,
 	.config_aneg	= &vsc82x4_config_aneg,
 	.ack_interrupt	= &vsc824x_ack_interrupt,
@@ -419,7 +417,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.name		= "Vitesse VSC8514",
 	.phy_id_mask	= 0x000ffff0,
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= &vsc824x_config_init,
 	.config_aneg	= &vsc82x4_config_aneg,
 	.ack_interrupt	= &vsc824x_ack_interrupt,
@@ -429,7 +426,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.name           = "Vitesse VSC8572",
 	.phy_id_mask    = 0x000ffff0,
 	.features       = PHY_GBIT_FEATURES,
-	.flags          = PHY_HAS_INTERRUPT,
 	.config_init    = &vsc824x_config_init,
 	.config_aneg    = &vsc82x4_config_aneg,
 	.ack_interrupt  = &vsc824x_ack_interrupt,
@@ -439,7 +435,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.name           = "Vitesse VSC8574",
 	.phy_id_mask    = 0x000ffff0,
 	.features       = PHY_GBIT_FEATURES,
-	.flags          = PHY_HAS_INTERRUPT,
 	.config_init    = &vsc824x_config_init,
 	.config_aneg    = &vsc82x4_config_aneg,
 	.ack_interrupt  = &vsc824x_ack_interrupt,
@@ -449,7 +444,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.name           = "Vitesse VSC8601",
 	.phy_id_mask    = 0x000ffff0,
 	.features       = PHY_GBIT_FEATURES,
-	.flags          = PHY_HAS_INTERRUPT,
 	.config_init    = &vsc8601_config_init,
 	.ack_interrupt  = &vsc824x_ack_interrupt,
 	.config_intr    = &vsc82xx_config_intr,
@@ -494,7 +488,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.name           = "Vitesse VSC8662",
 	.phy_id_mask    = 0x000ffff0,
 	.features       = PHY_GBIT_FEATURES,
-	.flags          = PHY_HAS_INTERRUPT,
 	.config_init    = &vsc824x_config_init,
 	.config_aneg    = &vsc82x4_config_aneg,
 	.ack_interrupt  = &vsc824x_ack_interrupt,
@@ -505,7 +498,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.phy_id_mask	= 0x000ffff0,
 	.name		= "Vitesse VSC8221",
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= &vsc8221_config_init,
 	.ack_interrupt	= &vsc824x_ack_interrupt,
 	.config_intr	= &vsc82xx_config_intr,
@@ -515,7 +507,6 @@ static struct phy_driver vsc82xx_driver[] = {
 	.phy_id_mask	= 0x000ffff0,
 	.name		= "Vitesse VSC8211",
 	.features	= PHY_GBIT_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= &vsc8221_config_init,
 	.ack_interrupt	= &vsc824x_ack_interrupt,
 	.config_intr	= &vsc82xx_config_intr,
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 2090277ea..240e04d5a 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -66,9 +66,8 @@ extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_full_features) __ro_after_ini
 #define PHY_POLL		-1
 #define PHY_IGNORE_INTERRUPT	-2
 
-#define PHY_HAS_INTERRUPT	0x00000001
-#define PHY_IS_INTERNAL		0x00000002
-#define PHY_RST_AFTER_CLK_EN	0x00000004
+#define PHY_IS_INTERNAL		0x00000001
+#define PHY_RST_AFTER_CLK_EN	0x00000002
 #define MDIO_DEVICE_IS_PHY	0x80000000
 
 /* Interface Mode definitions */
-- 
2.19.1

Re: [PATCH net-next v3 2/2] net: phy: remove flag PHY_HAS_INTERRUPT from driver configs

[Andrew Lunn]

On Fri, Nov 09, 2018 at 06:17:22PM +0100, Heiner Kallweit wrote:
> Now that flag PHY_HAS_INTERRUPT has been replaced with a check for
> callbacks config_intr and ack_interrupt, we can remove setting this
> flag from all driver configs.
> Last but not least remove flag PHY_HAS_INTERRUPT completely.
> 
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

Thanks for removing them all.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH net-next v3 0/2] net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt

[David Miller]

From: Heiner Kallweit <hkallweit1@gmail.com>
Date: Fri, 9 Nov 2018 18:15:31 +0100

> Flag PHY_HAS_INTERRUPT is used only here for this small check. I think
> using interrupts isn't possible if a driver defines neither
> config_intr nor ack_interrupts callback. So we can replace checking
> flag PHY_HAS_INTERRUPT with checking for these callbacks.
> This allows to remove this flag from all driver configs.
> 
> v2:
> - add helper for check in patch 1
> - remove PHY_HAS_INTERRUPT from all drivers, not only Realtek
> - remove flag PHY_HAS_INTERRUPT completely
> 
> v3:
> - rebase patch 2

Series applied, but please sort out that one driver which is preventing
us requiring both config_intr && ack_interrupt.

Thanks.