* [PATCH v2] ARM: dts: imx6ul: ccimx6ulsom: Add support for wireless SOM variant
@ 2018-11-05 10:43 Alex Gonzalez
2018-11-05 10:43 ` Alex Gonzalez
0 siblings, 1 reply; 3+ messages in thread
From: Alex Gonzalez @ 2018-11-05 10:43 UTC (permalink / raw)
To: shawnguo
Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx,
devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez
The wireless variants of the ConnecCore 6UL SOM include a Qualcomm
QCA6564 wireless chip with dual WiFi and Bluetooth.
The QCA6564 uses the out-of-tree driver at:
https://source.codeaurora.org/quic/la/platform/vendor/qcom-opensource/wlan/qcacld-2.0/
Blueooth uses the HCI H4 UART driver.
Changes since v1 [2]:
* Fixed indentation on iomuxc nodes
* Added reviewed-by line
Changes since [1]:
* Removed extra new line
[1] https://lore.kernel.org/lkml/1539962141-32418-2-git-send-email-alex.gonzalez@digi.com/
[2] https://lore.kernel.org/lkml/1540200443-24773-1-git-send-email-alex.gonzalez@digi.com/
Alex Gonzalez (1):
ARM: dts: imx6ul: ccimx6ulsom: Add support for wireless SOM variant
arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi | 64 +++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH v2] ARM: dts: imx6ul: ccimx6ulsom: Add support for wireless SOM variant
2018-11-05 10:43 [PATCH v2] ARM: dts: imx6ul: ccimx6ulsom: Add support for wireless SOM variant Alex Gonzalez
@ 2018-11-05 10:43 ` Alex Gonzalez
2018-11-16 2:52 ` Shawn Guo
0 siblings, 1 reply; 3+ messages in thread
From: Alex Gonzalez @ 2018-11-05 10:43 UTC (permalink / raw)
To: shawnguo
Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx,
devicetree, linux-kernel, linux-arm-kernel, alex.gonzalez
The wireless variants of the ConnecCore 6UL SOM include a Qualcomm
QCA6564 wireless chip with dual WiFi and Bluetooth.
Both the ConnectCore 6UL SBC Express and Pro boards fit a wireless SOM.
The Wifi is connected through the SDIO interface on usdhc1 and the
Bluetooth is connected via uart1.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
---
arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi | 64 +++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
index c71a84da1af0..ef26b2389c8f 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi
@@ -161,6 +161,25 @@
};
};
+/* UART1 (Bluetooth) */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+/* USDHC1 (Wireless) */
+&usdhc1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_wifibt_ctrl>;
+ pinctrl-1 = <&pinctrl_usdhc1_sleep &pinctrl_wifibt_ctrl_sleep>;
+ non-removable;
+ no-1-8-v;
+ bus-width = <4>;
+ status = "okay";
+};
+
&iomuxc {
pinctrl_gpmi_nand: gpmigrp {
fsl,pins = <
@@ -188,6 +207,51 @@
MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
>;
};
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS 0x1b0b1
+ MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17051
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1_sleep: usdhc1grp-sleep {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__GPIO2_IO16 0x3000
+ MX6UL_PAD_SD1_CLK__GPIO2_IO17 0x3000
+ MX6UL_PAD_SD1_DATA0__GPIO2_IO18 0x3000
+ MX6UL_PAD_SD1_DATA1__GPIO2_IO19 0x3000
+ MX6UL_PAD_SD1_DATA2__GPIO2_IO20 0x3000
+ MX6UL_PAD_SD1_DATA3__GPIO2_IO21 0x3000
+ >;
+ };
+
+ pinctrl_wifibt_ctrl: wifibt-ctrl-grp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x08a0
+ MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x08a0
+ >;
+ };
+
+ pinctrl_wifibt_ctrl_sleep: wifibt-ctrl-grp-sleep {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x3000
+ MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x3000
+ >;
+ };
};
®_arm {
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [PATCH v2] ARM: dts: imx6ul: ccimx6ulsom: Add support for wireless SOM variant
2018-11-05 10:43 ` Alex Gonzalez
@ 2018-11-16 2:52 ` Shawn Guo
0 siblings, 0 replies; 3+ messages in thread
From: Shawn Guo @ 2018-11-16 2:52 UTC (permalink / raw)
To: Alex Gonzalez
Cc: robh+dt, mark.rutland, s.hauer, kernel, fabio.estevam, linux-imx,
devicetree, linux-kernel, linux-arm-kernel
On Mon, Nov 05, 2018 at 11:43:42AM +0100, Alex Gonzalez wrote:
> The wireless variants of the ConnecCore 6UL SOM include a Qualcomm
> QCA6564 wireless chip with dual WiFi and Bluetooth.
>
> Both the ConnectCore 6UL SBC Express and Pro boards fit a wireless SOM.
>
> The Wifi is connected through the SDIO interface on usdhc1 and the
> Bluetooth is connected via uart1.
>
> Reviewed-by: Fabio Estevam <festevam@gmail.com>
> Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Applied, thanks.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-11-16 2:52 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-05 10:43 [PATCH v2] ARM: dts: imx6ul: ccimx6ulsom: Add support for wireless SOM variant Alex Gonzalez
2018-11-05 10:43 ` Alex Gonzalez
2018-11-16 2:52 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).