* [PATCH 1/4] mmc: sdhci-omap: Fix DCRC error handling during tuning
2018-11-19 11:16 [PATCH 0/4] Tuning Fixes for sdhci-omap Faiz Abbas
@ 2018-11-19 11:16 ` Faiz Abbas
2018-11-19 13:18 ` Ulf Hansson
2018-11-20 4:53 ` Kishon Vijay Abraham I
2018-11-19 11:16 ` [PATCH 2/4] mmc: sdhci-omap: Add variable to indicate host is tuning Faiz Abbas
` (2 subsequent siblings)
3 siblings, 2 replies; 13+ messages in thread
From: Faiz Abbas @ 2018-11-19 11:16 UTC (permalink / raw)
To: linux-kernel, linux-mmc; +Cc: ulf.hansson, kishon, adrian.hunter, faiz_abbas
Commit 7d33c3581536 ("mmc: sdhci-omap: Workaround for Errata i802")
disabled DCRC interrupts during tuning. This write to the interrupt
enable register gets overwritten in sdhci_prepare_data() and the
interrupt is not in fact disabled. Fix this by disabling the interrupt
in the host->ier variable.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
drivers/mmc/host/sdhci-omap.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 88347ce78f23..87138067e334 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -290,7 +290,6 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
u32 start_window = 0, max_window = 0;
u8 cur_match, prev_match = 0;
u32 length = 0, max_len = 0;
- u32 ier = host->ier;
u32 phase_delay = 0;
int ret = 0;
u32 reg;
@@ -317,9 +316,7 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
* during the tuning procedure. So disable it during the
* tuning procedure.
*/
- ier &= ~SDHCI_INT_DATA_CRC;
- sdhci_writel(host, ier, SDHCI_INT_ENABLE);
- sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE);
+ host->ier &= ~SDHCI_INT_DATA_CRC;
while (phase_delay <= MAX_PHASE_DELAY) {
sdhci_omap_set_dll(omap_host, phase_delay);
@@ -366,6 +363,8 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
ret:
sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
+ /* Reenable forbidden interrupt */
+ host->ier |= SDHCI_INT_DATA_CRC;
sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
return ret;
--
2.19.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH 1/4] mmc: sdhci-omap: Fix DCRC error handling during tuning
2018-11-19 11:16 ` [PATCH 1/4] mmc: sdhci-omap: Fix DCRC error handling during tuning Faiz Abbas
@ 2018-11-19 13:18 ` Ulf Hansson
2018-11-20 7:28 ` Faiz Abbas
2018-11-20 4:53 ` Kishon Vijay Abraham I
1 sibling, 1 reply; 13+ messages in thread
From: Ulf Hansson @ 2018-11-19 13:18 UTC (permalink / raw)
To: Faiz Abbas; +Cc: Linux Kernel Mailing List, linux-mmc, Kishon, Adrian Hunter
On 19 November 2018 at 12:16, Faiz Abbas <faiz_abbas@ti.com> wrote:
> Commit 7d33c3581536 ("mmc: sdhci-omap: Workaround for Errata i802")
> disabled DCRC interrupts during tuning. This write to the interrupt
> enable register gets overwritten in sdhci_prepare_data() and the
> interrupt is not in fact disabled. Fix this by disabling the interrupt
> in the host->ier variable.
>
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Should we have fixes/stable tag?
Kind regards
Uffe
> ---
> drivers/mmc/host/sdhci-omap.c | 7 +++----
> 1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
> index 88347ce78f23..87138067e334 100644
> --- a/drivers/mmc/host/sdhci-omap.c
> +++ b/drivers/mmc/host/sdhci-omap.c
> @@ -290,7 +290,6 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
> u32 start_window = 0, max_window = 0;
> u8 cur_match, prev_match = 0;
> u32 length = 0, max_len = 0;
> - u32 ier = host->ier;
> u32 phase_delay = 0;
> int ret = 0;
> u32 reg;
> @@ -317,9 +316,7 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
> * during the tuning procedure. So disable it during the
> * tuning procedure.
> */
> - ier &= ~SDHCI_INT_DATA_CRC;
> - sdhci_writel(host, ier, SDHCI_INT_ENABLE);
> - sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE);
> + host->ier &= ~SDHCI_INT_DATA_CRC;
>
> while (phase_delay <= MAX_PHASE_DELAY) {
> sdhci_omap_set_dll(omap_host, phase_delay);
> @@ -366,6 +363,8 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
>
> ret:
> sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
> + /* Reenable forbidden interrupt */
> + host->ier |= SDHCI_INT_DATA_CRC;
> sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
> sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
> return ret;
> --
> 2.19.1
>
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [PATCH 1/4] mmc: sdhci-omap: Fix DCRC error handling during tuning
2018-11-19 13:18 ` Ulf Hansson
@ 2018-11-20 7:28 ` Faiz Abbas
0 siblings, 0 replies; 13+ messages in thread
From: Faiz Abbas @ 2018-11-20 7:28 UTC (permalink / raw)
To: Ulf Hansson; +Cc: Linux Kernel Mailing List, linux-mmc, Kishon, Adrian Hunter
Hi Uffe
On 19/11/18 6:48 PM, Ulf Hansson wrote:
> On 19 November 2018 at 12:16, Faiz Abbas <faiz_abbas@ti.com> wrote:
>> Commit 7d33c3581536 ("mmc: sdhci-omap: Workaround for Errata i802")
>> disabled DCRC interrupts during tuning. This write to the interrupt
>> enable register gets overwritten in sdhci_prepare_data() and the
>> interrupt is not in fact disabled. Fix this by disabling the interrupt
>> in the host->ier variable.
>>
>> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
>
> Should we have fixes/stable tag?
>
Ok. Will add that.
Thanks,
Faiz
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 1/4] mmc: sdhci-omap: Fix DCRC error handling during tuning
2018-11-19 11:16 ` [PATCH 1/4] mmc: sdhci-omap: Fix DCRC error handling during tuning Faiz Abbas
2018-11-19 13:18 ` Ulf Hansson
@ 2018-11-20 4:53 ` Kishon Vijay Abraham I
2018-11-21 9:39 ` Faiz Abbas
1 sibling, 1 reply; 13+ messages in thread
From: Kishon Vijay Abraham I @ 2018-11-20 4:53 UTC (permalink / raw)
To: Faiz Abbas, linux-kernel, linux-mmc; +Cc: ulf.hansson, adrian.hunter
Hi,
On 19/11/18 4:46 PM, Faiz Abbas wrote:
> Commit 7d33c3581536 ("mmc: sdhci-omap: Workaround for Errata i802")
> disabled DCRC interrupts during tuning. This write to the interrupt
> enable register gets overwritten in sdhci_prepare_data() and the
> interrupt is not in fact disabled. Fix this by disabling the interrupt
> in the host->ier variable.
>
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
> ---
> drivers/mmc/host/sdhci-omap.c | 7 +++----
> 1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
> index 88347ce78f23..87138067e334 100644
> --- a/drivers/mmc/host/sdhci-omap.c
> +++ b/drivers/mmc/host/sdhci-omap.c
> @@ -290,7 +290,6 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
> u32 start_window = 0, max_window = 0;
> u8 cur_match, prev_match = 0;
> u32 length = 0, max_len = 0;
> - u32 ier = host->ier;
> u32 phase_delay = 0;
> int ret = 0;
> u32 reg;
> @@ -317,9 +316,7 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
> * during the tuning procedure. So disable it during the
> * tuning procedure.
> */
> - ier &= ~SDHCI_INT_DATA_CRC;
> - sdhci_writel(host, ier, SDHCI_INT_ENABLE);
> - sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE);
> + host->ier &= ~SDHCI_INT_DATA_CRC;
>
> while (phase_delay <= MAX_PHASE_DELAY) {
> sdhci_omap_set_dll(omap_host, phase_delay);
> @@ -366,6 +363,8 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
>
> ret:
> sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
> + /* Reenable forbidden interrupt */
> + host->ier |= SDHCI_INT_DATA_CRC;
It's better to have a backup of host->ier and restore the value here (in
case DATA_CRC is disabled for other cases).
Thanks
Kishon
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [PATCH 1/4] mmc: sdhci-omap: Fix DCRC error handling during tuning
2018-11-20 4:53 ` Kishon Vijay Abraham I
@ 2018-11-21 9:39 ` Faiz Abbas
0 siblings, 0 replies; 13+ messages in thread
From: Faiz Abbas @ 2018-11-21 9:39 UTC (permalink / raw)
To: Kishon Vijay Abraham I, linux-kernel, linux-mmc
Cc: ulf.hansson, adrian.hunter
Hi Kishon,
On 20/11/18 10:23 AM, Kishon Vijay Abraham I wrote:
> Hi,
>
> On 19/11/18 4:46 PM, Faiz Abbas wrote:
>> Commit 7d33c3581536 ("mmc: sdhci-omap: Workaround for Errata i802")
>> disabled DCRC interrupts during tuning. This write to the interrupt
>> enable register gets overwritten in sdhci_prepare_data() and the
>> interrupt is not in fact disabled. Fix this by disabling the interrupt
>> in the host->ier variable.
>>
>> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
>> ---
>> drivers/mmc/host/sdhci-omap.c | 7 +++----
>> 1 file changed, 3 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/mmc/host/sdhci-omap.c
>> b/drivers/mmc/host/sdhci-omap.c
>> index 88347ce78f23..87138067e334 100644
>> --- a/drivers/mmc/host/sdhci-omap.c
>> +++ b/drivers/mmc/host/sdhci-omap.c
>> @@ -290,7 +290,6 @@ static int sdhci_omap_execute_tuning(struct
>> mmc_host *mmc, u32 opcode)
>> u32 start_window = 0, max_window = 0;
>> u8 cur_match, prev_match = 0;
>> u32 length = 0, max_len = 0;
>> - u32 ier = host->ier;
>> u32 phase_delay = 0;
>> int ret = 0;
>> u32 reg;
>> @@ -317,9 +316,7 @@ static int sdhci_omap_execute_tuning(struct
>> mmc_host *mmc, u32 opcode)
>> * during the tuning procedure. So disable it during the
>> * tuning procedure.
>> */
>> - ier &= ~SDHCI_INT_DATA_CRC;
>> - sdhci_writel(host, ier, SDHCI_INT_ENABLE);
>> - sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE);
>> + host->ier &= ~SDHCI_INT_DATA_CRC;
>> while (phase_delay <= MAX_PHASE_DELAY) {
>> sdhci_omap_set_dll(omap_host, phase_delay);
>> @@ -366,6 +363,8 @@ static int sdhci_omap_execute_tuning(struct
>> mmc_host *mmc, u32 opcode)
>> ret:
>> sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
>> + /* Reenable forbidden interrupt */
>> + host->ier |= SDHCI_INT_DATA_CRC;
>
> It's better to have a backup of host->ier and restore the value here (in
> case DATA_CRC is disabled for other cases).
>
host->ier is modified everywhere during an mmc request. I would not
expect it to hold its value after so many tuning commands. I can add a
bool to check of DCRC was enabled before and only then re-enable it.
Thanks,
Faiz
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 2/4] mmc: sdhci-omap: Add variable to indicate host is tuning
2018-11-19 11:16 [PATCH 0/4] Tuning Fixes for sdhci-omap Faiz Abbas
2018-11-19 11:16 ` [PATCH 1/4] mmc: sdhci-omap: Fix DCRC error handling during tuning Faiz Abbas
@ 2018-11-19 11:16 ` Faiz Abbas
2018-11-19 13:18 ` Ulf Hansson
2018-11-19 11:16 ` [PATCH 3/4] mmc: sdhci-omap: Add platform specific reset callback Faiz Abbas
2018-11-19 11:16 ` [PATCH 4/4] mmc: sdhci-omap: Remove redundant structure assignments Faiz Abbas
3 siblings, 1 reply; 13+ messages in thread
From: Faiz Abbas @ 2018-11-19 11:16 UTC (permalink / raw)
To: linux-kernel, linux-mmc; +Cc: ulf.hansson, kishon, adrian.hunter, faiz_abbas
Add a variable in sdhc_omap_host to indicate whether a tuning
operation is ongoing.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
drivers/mmc/host/sdhci-omap.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 87138067e334..cfffcf58be3f 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -115,6 +115,7 @@ struct sdhci_omap_host {
struct pinctrl *pinctrl;
struct pinctrl_state **pinctrl_state;
+ bool is_tuning;
};
static void sdhci_omap_start_clock(struct sdhci_omap_host *omap_host);
@@ -318,6 +319,8 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
*/
host->ier &= ~SDHCI_INT_DATA_CRC;
+ omap_host->is_tuning = true;
+
while (phase_delay <= MAX_PHASE_DELAY) {
sdhci_omap_set_dll(omap_host, phase_delay);
@@ -355,9 +358,12 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
phase_delay = max_window + 4 * (max_len >> 1);
sdhci_omap_set_dll(omap_host, phase_delay);
+ omap_host->is_tuning = false;
+
goto ret;
tuning_error:
+ omap_host->is_tuning = false;
dev_err(dev, "Tuning failed\n");
sdhci_omap_disable_tuning(omap_host);
--
2.19.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH 2/4] mmc: sdhci-omap: Add variable to indicate host is tuning
2018-11-19 11:16 ` [PATCH 2/4] mmc: sdhci-omap: Add variable to indicate host is tuning Faiz Abbas
@ 2018-11-19 13:18 ` Ulf Hansson
2018-11-20 12:58 ` Faiz Abbas
0 siblings, 1 reply; 13+ messages in thread
From: Ulf Hansson @ 2018-11-19 13:18 UTC (permalink / raw)
To: Faiz Abbas; +Cc: Linux Kernel Mailing List, linux-mmc, Kishon, Adrian Hunter
On 19 November 2018 at 12:16, Faiz Abbas <faiz_abbas@ti.com> wrote:
> Add a variable in sdhc_omap_host to indicate whether a tuning
> operation is ongoing.
>
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Please squash this into patch3 as it seems a bit silly to keep this a
separate change.
Kind regards
Uffe
> ---
> drivers/mmc/host/sdhci-omap.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
> index 87138067e334..cfffcf58be3f 100644
> --- a/drivers/mmc/host/sdhci-omap.c
> +++ b/drivers/mmc/host/sdhci-omap.c
> @@ -115,6 +115,7 @@ struct sdhci_omap_host {
>
> struct pinctrl *pinctrl;
> struct pinctrl_state **pinctrl_state;
> + bool is_tuning;
> };
>
> static void sdhci_omap_start_clock(struct sdhci_omap_host *omap_host);
> @@ -318,6 +319,8 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
> */
> host->ier &= ~SDHCI_INT_DATA_CRC;
>
> + omap_host->is_tuning = true;
> +
> while (phase_delay <= MAX_PHASE_DELAY) {
> sdhci_omap_set_dll(omap_host, phase_delay);
>
> @@ -355,9 +358,12 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
> phase_delay = max_window + 4 * (max_len >> 1);
> sdhci_omap_set_dll(omap_host, phase_delay);
>
> + omap_host->is_tuning = false;
> +
> goto ret;
>
> tuning_error:
> + omap_host->is_tuning = false;
> dev_err(dev, "Tuning failed\n");
> sdhci_omap_disable_tuning(omap_host);
>
> --
> 2.19.1
>
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [PATCH 2/4] mmc: sdhci-omap: Add variable to indicate host is tuning
2018-11-19 13:18 ` Ulf Hansson
@ 2018-11-20 12:58 ` Faiz Abbas
0 siblings, 0 replies; 13+ messages in thread
From: Faiz Abbas @ 2018-11-20 12:58 UTC (permalink / raw)
To: Ulf Hansson; +Cc: Linux Kernel Mailing List, linux-mmc, Kishon, Adrian Hunter
Hi Uffe,
On 19/11/18 6:48 PM, Ulf Hansson wrote:
> On 19 November 2018 at 12:16, Faiz Abbas <faiz_abbas@ti.com> wrote:
>> Add a variable in sdhc_omap_host to indicate whether a tuning
>> operation is ongoing.
>>
>> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
>
> Please squash this into patch3 as it seems a bit silly to keep this a
> separate change.
>
Ok. Squashing 2 and 3.
Thanks,
Faiz
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 3/4] mmc: sdhci-omap: Add platform specific reset callback
2018-11-19 11:16 [PATCH 0/4] Tuning Fixes for sdhci-omap Faiz Abbas
2018-11-19 11:16 ` [PATCH 1/4] mmc: sdhci-omap: Fix DCRC error handling during tuning Faiz Abbas
2018-11-19 11:16 ` [PATCH 2/4] mmc: sdhci-omap: Add variable to indicate host is tuning Faiz Abbas
@ 2018-11-19 11:16 ` Faiz Abbas
2018-11-20 5:00 ` Kishon Vijay Abraham I
2018-11-19 11:16 ` [PATCH 4/4] mmc: sdhci-omap: Remove redundant structure assignments Faiz Abbas
3 siblings, 1 reply; 13+ messages in thread
From: Faiz Abbas @ 2018-11-19 11:16 UTC (permalink / raw)
To: linux-kernel, linux-mmc; +Cc: ulf.hansson, kishon, adrian.hunter, faiz_abbas
The TRM (SPRUIC2C - January 2017 - Revised May 2018 [1]) forbids
assertion of data reset while tuning is happening. Implement a
platform specific callback that takes care of this condition.
[1] http://www.ti.com/lit/pdf/spruic2 Section 25.5.1.2.4
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
drivers/mmc/host/sdhci-omap.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index cfffcf58be3f..bf268b38ddc8 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -688,6 +688,18 @@ static void sdhci_omap_set_uhs_signaling(struct sdhci_host *host,
sdhci_omap_start_clock(omap_host);
}
+void sdhci_omap_reset(struct sdhci_host *host, u8 mask)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
+
+ /* Don't reset data lines during tuning operation */
+ if (omap_host->is_tuning)
+ mask &= ~SDHCI_RESET_DATA;
+
+ sdhci_reset(host, mask);
+}
+
static struct sdhci_ops sdhci_omap_ops = {
.set_clock = sdhci_omap_set_clock,
.set_power = sdhci_omap_set_power,
@@ -696,7 +708,7 @@ static struct sdhci_ops sdhci_omap_ops = {
.get_min_clock = sdhci_omap_get_min_clock,
.set_bus_width = sdhci_omap_set_bus_width,
.platform_send_init_74_clocks = sdhci_omap_init_74_clocks,
- .reset = sdhci_reset,
+ .reset = sdhci_omap_reset,
.set_uhs_signaling = sdhci_omap_set_uhs_signaling,
};
--
2.19.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH 3/4] mmc: sdhci-omap: Add platform specific reset callback
2018-11-19 11:16 ` [PATCH 3/4] mmc: sdhci-omap: Add platform specific reset callback Faiz Abbas
@ 2018-11-20 5:00 ` Kishon Vijay Abraham I
0 siblings, 0 replies; 13+ messages in thread
From: Kishon Vijay Abraham I @ 2018-11-20 5:00 UTC (permalink / raw)
To: Faiz Abbas, linux-kernel, linux-mmc; +Cc: ulf.hansson, adrian.hunter
On 19/11/18 4:46 PM, Faiz Abbas wrote:
> The TRM (SPRUIC2C - January 2017 - Revised May 2018 [1]) forbids
> assertion of data reset while tuning is happening. Implement a
> platform specific callback that takes care of this condition.
>
> [1] http://www.ti.com/lit/pdf/spruic2 Section 25.5.1.2.4
>
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Once patch 2 is merged with this patch, you can add
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> drivers/mmc/host/sdhci-omap.c | 14 +++++++++++++-
> 1 file changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
> index cfffcf58be3f..bf268b38ddc8 100644
> --- a/drivers/mmc/host/sdhci-omap.c
> +++ b/drivers/mmc/host/sdhci-omap.c
> @@ -688,6 +688,18 @@ static void sdhci_omap_set_uhs_signaling(struct sdhci_host *host,
> sdhci_omap_start_clock(omap_host);
> }
>
> +void sdhci_omap_reset(struct sdhci_host *host, u8 mask)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
> +
> + /* Don't reset data lines during tuning operation */
> + if (omap_host->is_tuning)
> + mask &= ~SDHCI_RESET_DATA;
> +
> + sdhci_reset(host, mask);
> +}
> +
> static struct sdhci_ops sdhci_omap_ops = {
> .set_clock = sdhci_omap_set_clock,
> .set_power = sdhci_omap_set_power,
> @@ -696,7 +708,7 @@ static struct sdhci_ops sdhci_omap_ops = {
> .get_min_clock = sdhci_omap_get_min_clock,
> .set_bus_width = sdhci_omap_set_bus_width,
> .platform_send_init_74_clocks = sdhci_omap_init_74_clocks,
> - .reset = sdhci_reset,
> + .reset = sdhci_omap_reset,
> .set_uhs_signaling = sdhci_omap_set_uhs_signaling,
> };
>
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 4/4] mmc: sdhci-omap: Remove redundant structure assignments
2018-11-19 11:16 [PATCH 0/4] Tuning Fixes for sdhci-omap Faiz Abbas
` (2 preceding siblings ...)
2018-11-19 11:16 ` [PATCH 3/4] mmc: sdhci-omap: Add platform specific reset callback Faiz Abbas
@ 2018-11-19 11:16 ` Faiz Abbas
2018-11-20 5:01 ` Kishon Vijay Abraham I
3 siblings, 1 reply; 13+ messages in thread
From: Faiz Abbas @ 2018-11-19 11:16 UTC (permalink / raw)
To: linux-kernel, linux-mmc; +Cc: ulf.hansson, kishon, adrian.hunter, faiz_abbas
The sdhci_execute_tuning() function has assignment of
private pointers multiple times. Remove the redundant assignment.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
drivers/mmc/host/sdhci-omap.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index bf268b38ddc8..b3cb39d0db6f 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -295,10 +295,6 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
int ret = 0;
u32 reg;
- pltfm_host = sdhci_priv(host);
- omap_host = sdhci_pltfm_priv(pltfm_host);
- dev = omap_host->dev;
-
/* clock tuning is not needed for upto 52MHz */
if (ios->clock <= 52000000)
return 0;
--
2.19.1
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH 4/4] mmc: sdhci-omap: Remove redundant structure assignments
2018-11-19 11:16 ` [PATCH 4/4] mmc: sdhci-omap: Remove redundant structure assignments Faiz Abbas
@ 2018-11-20 5:01 ` Kishon Vijay Abraham I
0 siblings, 0 replies; 13+ messages in thread
From: Kishon Vijay Abraham I @ 2018-11-20 5:01 UTC (permalink / raw)
To: Faiz Abbas, linux-kernel, linux-mmc; +Cc: ulf.hansson, adrian.hunter
On 19/11/18 4:46 PM, Faiz Abbas wrote:
> The sdhci_execute_tuning() function has assignment of
> private pointers multiple times. Remove the redundant assignment.
>
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> drivers/mmc/host/sdhci-omap.c | 4 ----
> 1 file changed, 4 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
> index bf268b38ddc8..b3cb39d0db6f 100644
> --- a/drivers/mmc/host/sdhci-omap.c
> +++ b/drivers/mmc/host/sdhci-omap.c
> @@ -295,10 +295,6 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
> int ret = 0;
> u32 reg;
>
> - pltfm_host = sdhci_priv(host);
> - omap_host = sdhci_pltfm_priv(pltfm_host);
> - dev = omap_host->dev;
> -
> /* clock tuning is not needed for upto 52MHz */
> if (ios->clock <= 52000000)
> return 0;
>
^ permalink raw reply [flat|nested] 13+ messages in thread