LKML Archive on
 help / color / Atom feed
From: Sibi Sankar <>
	Sibi Sankar <>
Subject: [PATCH 0/2] Add firmware bindings for Q6V5 MSS
Date: Wed, 12 Dec 2018 18:14:54 +0530
Message-ID: <> (raw)

Q6V5 MSS on certain SoCs like SDM845 are capable of operating under
completely different configuration (like Non-Modem WLAN configuration)
depending on the firmware loaded without any change in boot sequence
of the Hexagon core. The patch series is ultimately aimed to avoid
multiple compatibles per SoC to just specify different upstreamed firmware
locations. This is achieved by introducing "qcom,firmware" binding
to store the relative path of mba and modem metadata.

remoteproc@4080000 { 
	qcom,firmware = "qcom/sdm845/mss/mba.mbn",

Suggested-by: Bjorn Andersson <>

SibiSankar (2):
  dt-bindings: remoteproc: qcom: Add firmware bindings for Q6V5 MSS
  remoteproc: qcom: q6v5-mss: Add support for parsing fw dt bindings

 .../bindings/remoteproc/qcom,q6v5.txt         |  7 +++
 drivers/remoteproc/qcom_q6v5_mss.c            | 49 ++++++++++++++++---
 2 files changed, 48 insertions(+), 8 deletions(-)

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

             reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-12 12:44 Sibi Sankar [this message]
2018-12-12 12:44 ` [PATCH 1/2] dt-bindings: remoteproc: qcom: " Sibi Sankar
2018-12-20 20:10   ` Rob Herring
2018-12-28  4:47     ` Sibi Sankar
2018-12-12 12:44 ` [PATCH 2/2] remoteproc: qcom: q6v5-mss: Add support for parsing fw dt bindings Sibi Sankar

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on

Archives are clonable:
	git clone --mirror lkml/git/0.git
	git clone --mirror lkml/git/1.git
	git clone --mirror lkml/git/2.git
	git clone --mirror lkml/git/3.git
	git clone --mirror lkml/git/4.git
	git clone --mirror lkml/git/5.git
	git clone --mirror lkml/git/6.git
	git clone --mirror lkml/git/7.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ \
	public-inbox-index lkml

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox