[PATCH 4.19 00/46] 4.19.13-stable review

[PATCH 4.19 00/46] 4.19.13-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.19.13 release.
There are 46 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun Dec 30 11:30:49 UTC 2018.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.13-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.19.13-rc1

Gustavo A. R. Silva <gustavo@embeddedor.com>
    drm/ioctl: Fix Spectre v1 vulnerabilities

Ivan Delalande <colona@arista.com>
    proc/sysctl: don't return ENOMEM on lookup when a table is unregistering

Benjamin Tissoires <benjamin.tissoires@redhat.com>
    Input: elantech - disable elan-i2c for P52 and P72

Roman Gushchin <guro@fb.com>
    mm: don't miss the last page because of round-off error

Oscar Salvador <osalvador@suse.de>
    mm, page_alloc: fix has_unmovable_pages for HugePages

Peter Xu <peterx@redhat.com>
    mm: thp: fix flags for pmd migration when split

Mikhail Zaslonko <zaslonko@linux.ibm.com>
    mm, memory_hotplug: initialize struct pages for the full memory section

Jacopo Mondi <jacopo+renesas@jmondi.org>
    media: ov5640: Fix set format regression

Ihab Zhaika <ihab.zhaika@intel.com>
    iwlwifi: add new cards for 9560, 9462, 9461 and killer series

Brian Norris <briannorris@chromium.org>
    Revert "mwifiex: restructure rx_reorder_tbl_lock usage"

Emmanuel Grumbach <emmanuel.grumbach@intel.com>
    iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT to old firmwares

Larry Finger <Larry.Finger@lwfinger.net>
    rtlwifi: Fix leak of skb when processing C2H_BT_INFO

Mathias Krause <minipli@googlemail.com>
    xfrm_user: fix freeing of xfrm states on acquire

Martin Schwidefsky <schwidefsky@de.ibm.com>
    mm: introduce mm_[p4d|pud|pmd]_folded

Martin Schwidefsky <schwidefsky@de.ibm.com>
    mm: make the __PAGETABLE_PxD_FOLDED defines non-empty

Martin Schwidefsky <schwidefsky@de.ibm.com>
    mm: add mm_pxd_folded checks to pgtable_bytes accounting functions

Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
    panic: avoid deadlocks in re-entrant console drivers

Reinette Chatre <reinette.chatre@intel.com>
    x86/intel_rdt: Ensure a CPU remains online for the region's pseudo-locking sequence

Alistair Strachan <astrachan@google.com>
    x86/vdso: Pass --eh-frame-hdr to the linker

Dan Williams <dan.j.williams@intel.com>
    x86/mm: Fix decoy address handling vs 32-bit builds

Colin Ian King <colin.king@canonical.com>
    x86/mtrr: Don't copy uninitialized gentry fields back to userspace

Thomas Gleixner <tglx@linutronix.de>
    futex: Cure exit race

Dexuan Cui <decui@microsoft.com>
    Drivers: hv: vmbus: Return -EINVAL for the sys files for unopened channels

Cfir Cohen <cfir@google.com>
    KVM: Fix UAF in nested posted interrupt processing

Eduardo Habkost <ehabkost@redhat.com>
    kvm: x86: Add AMD's EX_CFG to the list of ignored MSRs

Wanpeng Li <wanpengli@tencent.com>
    KVM: X86: Fix NULL deref in vcpu_scan_ioapic

Thomas Gleixner <tglx@linutronix.de>
    posix-timers: Fix division by zero bug

Hans de Goede <hdegoede@redhat.com>
    gpiolib-acpi: Only defer request_irq for GpioInt ACPI event handlers

Christophe Leroy <christophe.leroy@c-s.fr>
    gpio: max7301: fix driver for use with CONFIG_VMAP_STACK

Russell King <rmk+kernel@armlinux.org.uk>
    mmc: omap_hsmmc: fix DMA API warning

Ulf Hansson <ulf.hansson@linaro.org>
    mmc: core: Use a minimum 1600ms timeout when enabling CACHE ctrl

Ulf Hansson <ulf.hansson@linaro.org>
    mmc: core: Allow BKOPS and CACHE ctrl even if no HPI support

Ulf Hansson <ulf.hansson@linaro.org>
    mmc: core: Reset HPI enabled state during re-init and in case of errors

Jens Axboe <axboe@kernel.dk>
    scsi: sd: use mempool for discard special page

Martin K. Petersen <martin.petersen@oracle.com>
    scsi: t10-pi: Return correct ref tag when queue has no integrity profile

Richard Weinberger <richard@nod.at>
    ubifs: Handle re-linking of inodes correctly while recovery

Jörgen Storvist <jorgen.storvist@gmail.com>
    USB: serial: option: add Telit LN940 series

Jörgen Storvist <jorgen.storvist@gmail.com>
    USB: serial: option: add Fibocom NL668 series

Jörgen Storvist <jorgen.storvist@gmail.com>
    USB: serial: option: add Simcom SIM7500/SIM7600 (MBIM mode)

Tore Anderson <tore@fud.no>
    USB: serial: option: add HP lt4132

Jörgen Storvist <jorgen.storvist@gmail.com>
    USB: serial: option: add GosunCn ZTE WeLink ME3630

Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
    USB: xhci: fix 'broken_suspend' placement in struct xchi_hcd

Mathias Nyman <mathias.nyman@linux.intel.com>
    xhci: Don't prevent USB2 bus suspend in state check intended for USB3 only

Hui Peng <benquike@gmail.com>
    USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data

Christian Brauner <christian@brauner.io>
    Revert "vfs: Allow userns root to call mknod on owned filesystems."

Dave Chinner <dchinner@redhat.com>
    iomap: Revert "fs/iomap.c: get/put the page in iomap_page_create/release()"


-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arm/include/asm/pgtable-2level.h              |   2 +-
 arch/m68k/include/asm/pgtable_mm.h                 |   4 +-
 arch/microblaze/include/asm/pgtable.h              |   2 +-
 arch/nds32/include/asm/pgtable.h                   |   2 +-
 arch/parisc/include/asm/pgtable.h                  |   2 +-
 arch/x86/entry/vdso/Makefile                       |   3 +-
 arch/x86/include/asm/msr-index.h                   |   1 +
 arch/x86/kernel/cpu/intel_rdt_ctrlmondata.c        |   4 +
 arch/x86/kernel/cpu/mtrr/if.c                      |   2 +
 arch/x86/kvm/vmx.c                                 |   2 +
 arch/x86/kvm/x86.c                                 |   4 +-
 arch/x86/mm/pat.c                                  |  13 +-
 drivers/gpio/gpio-max7301.c                        |  12 +-
 drivers/gpio/gpiolib-acpi.c                        | 144 ++++++++++++---------
 drivers/gpu/drm/drm_ioctl.c                        |  10 +-
 drivers/hv/vmbus_drv.c                             |  20 +++
 drivers/input/mouse/elantech.c                     |  18 ++-
 drivers/media/i2c/ov5640.c                         |  17 ++-
 drivers/mmc/core/mmc.c                             |  24 ++--
 drivers/mmc/host/omap_hsmmc.c                      |  12 +-
 drivers/net/usb/hso.c                              |  18 ++-
 drivers/net/wireless/intel/iwlwifi/mvm/fw.c        |   9 ++
 drivers/net/wireless/intel/iwlwifi/pcie/drv.c      |  50 +++++++
 drivers/net/wireless/marvell/mwifiex/11n.c         |   5 +-
 .../net/wireless/marvell/mwifiex/11n_rxreorder.c   |  96 +++++++-------
 drivers/net/wireless/marvell/mwifiex/uap_txrx.c    |   3 -
 drivers/net/wireless/realtek/rtlwifi/base.c        |   1 +
 drivers/scsi/sd.c                                  |  23 +++-
 drivers/usb/host/xhci-hub.c                        |   3 +-
 drivers/usb/host/xhci.h                            |   4 +-
 drivers/usb/serial/option.c                        |  16 ++-
 fs/iomap.c                                         |   7 -
 fs/namei.c                                         |   3 +-
 fs/proc/proc_sysctl.c                              |  13 +-
 fs/ubifs/replay.c                                  |  37 ++++++
 include/asm-generic/4level-fixup.h                 |   2 +-
 include/asm-generic/5level-fixup.h                 |   2 +-
 include/asm-generic/pgtable-nop4d-hack.h           |   2 +-
 include/asm-generic/pgtable-nop4d.h                |   2 +-
 include/asm-generic/pgtable-nopmd.h                |   2 +-
 include/asm-generic/pgtable-nopud.h                |   2 +-
 include/asm-generic/pgtable.h                      |  16 +++
 include/linux/math64.h                             |   3 +
 include/linux/mm.h                                 |   8 ++
 include/linux/t10-pi.h                             |   9 +-
 include/net/xfrm.h                                 |   1 +
 kernel/futex.c                                     |  69 +++++++++-
 kernel/panic.c                                     |   6 +-
 kernel/time/posix-timers.c                         |   5 +-
 mm/huge_memory.c                                   |  20 +--
 mm/page_alloc.c                                    |  19 ++-
 mm/vmscan.c                                        |   6 +-
 net/xfrm/xfrm_state.c                              |   8 +-
 net/xfrm/xfrm_user.c                               |   4 +-
 55 files changed, 556 insertions(+), 220 deletions(-)

[PATCH 4.19 01/46] iomap: Revert "fs/iomap.c: get/put the page in iomap_page_create/release()"

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit a837eca2412051628c0529768c9bc4f3580b040e ]

This reverts commit 61c6de667263184125d5ca75e894fcad632b0dd3.

The reverted commit added page reference counting to iomap page
structures that are used to track block size < page size state. This
was supposed to align the code with page migration page accounting
assumptions, but what it has done instead is break XFS filesystems.
Every fstests run I've done on sub-page block size XFS filesystems
has since picking up this commit 2 days ago has failed with bad page
state errors such as:

# ./run_check.sh "-m rmapbt=1,reflink=1 -i sparse=1 -b size=1k" "generic/038"
....
SECTION       -- xfs
FSTYP         -- xfs (debug)
PLATFORM      -- Linux/x86_64 test1 4.20.0-rc6-dgc+
MKFS_OPTIONS  -- -f -m rmapbt=1,reflink=1 -i sparse=1 -b size=1k /dev/sdc
MOUNT_OPTIONS -- /dev/sdc /mnt/scratch

generic/038 454s ...
 run fstests generic/038 at 2018-12-20 18:43:05
 XFS (sdc): Unmounting Filesystem
 XFS (sdc): Mounting V5 Filesystem
 XFS (sdc): Ending clean mount
 BUG: Bad page state in process kswapd0  pfn:3a7fa
 page:ffffea0000ccbeb0 count:0 mapcount:0 mapping:ffff88800d9b6360 index:0x1
 flags: 0xfffffc0000000()
 raw: 000fffffc0000000 dead000000000100 dead000000000200 ffff88800d9b6360
 raw: 0000000000000001 0000000000000000 00000000ffffffff
 page dumped because: non-NULL mapping
 CPU: 0 PID: 676 Comm: kswapd0 Not tainted 4.20.0-rc6-dgc+ #915
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014
 Call Trace:
  dump_stack+0x67/0x90
  bad_page.cold.116+0x8a/0xbd
  free_pcppages_bulk+0x4bf/0x6a0
  free_unref_page_list+0x10f/0x1f0
  shrink_page_list+0x49d/0xf50
  shrink_inactive_list+0x19d/0x3b0
  shrink_node_memcg.constprop.77+0x398/0x690
  ? shrink_slab.constprop.81+0x278/0x3f0
  shrink_node+0x7a/0x2f0
  kswapd+0x34b/0x6d0
  ? node_reclaim+0x240/0x240
  kthread+0x11f/0x140
  ? __kthread_bind_mask+0x60/0x60
  ret_from_fork+0x24/0x30
 Disabling lock debugging due to kernel taint
....

The failures are from anyway that frees pages and empties the
per-cpu page magazines, so it's not a predictable failure or an easy
to debug failure.

generic/038 is a reliable reproducer of this problem - it has a 9 in
10 failure rate on one of my test machines. Failure on other
machines have been at random points in fstests runs but every run
has ended up tripping this problem. Hence generic/038 was used to
bisect the failure because it was the most reliable failure.

It is too close to the 4.20 release (not to mention holidays) to
try to diagnose, fix and test the underlying cause of the problem,
so reverting the commit is the only option we have right now. The
revert has been tested against a current tot 4.20-rc7+ kernel across
multiple machines running sub-page block size XFs filesystems and
none of the bad page state failures have been seen.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Cc: Piotr Jaroszynski <pjaroszynski@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Brian Foster <bfoster@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/iomap.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/fs/iomap.c b/fs/iomap.c
index 37da7a61a6c5..ec15cf2ec696 100644
--- a/fs/iomap.c
+++ b/fs/iomap.c
@@ -117,12 +117,6 @@ iomap_page_create(struct inode *inode, struct page *page)
 	atomic_set(&iop->read_count, 0);
 	atomic_set(&iop->write_count, 0);
 	bitmap_zero(iop->uptodate, PAGE_SIZE / SECTOR_SIZE);
-
-	/*
-	 * migrate_page_move_mapping() assumes that pages with private data have
-	 * their count elevated by 1.
-	 */
-	get_page(page);
 	set_page_private(page, (unsigned long)iop);
 	SetPagePrivate(page);
 	return iop;
@@ -139,7 +133,6 @@ iomap_page_release(struct page *page)
 	WARN_ON_ONCE(atomic_read(&iop->write_count));
 	ClearPagePrivate(page);
 	set_page_private(page, 0);
-	put_page(page);
 	kfree(iop);
 }
 
-- 
2.19.1

[PATCH 4.19 02/46] Revert "vfs: Allow userns root to call mknod on owned filesystems."

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian Brauner <christian@brauner.io>

commit 94f82008ce30e2624537d240d64ce718255e0b80 upstream.

This reverts commit 55956b59df336f6738da916dbb520b6e37df9fbd.

commit 55956b59df33 ("vfs: Allow userns root to call mknod on owned filesystems.")
enabled mknod() in user namespaces for userns root if CAP_MKNOD is
available. However, these device nodes are useless since any filesystem
mounted from a non-initial user namespace will set the SB_I_NODEV flag on
the filesystem. Now, when a device node s created in a non-initial user
namespace a call to open() on said device node will fail due to:

bool may_open_dev(const struct path *path)
{
        return !(path->mnt->mnt_flags & MNT_NODEV) &&
                !(path->mnt->mnt_sb->s_iflags & SB_I_NODEV);
}

The problem with this is that as of the aforementioned commit mknod()
creates partially functional device nodes in non-initial user namespaces.
In particular, it has the consequence that as of the aforementioned commit
open() will be more privileged with respect to device nodes than mknod().
Before it was the other way around. Specifically, if mknod() succeeded
then it was transparent for any userspace application that a fatal error
must have occured when open() failed.

All of this breaks multiple userspace workloads and a widespread assumption
about how to handle mknod(). Basically, all container runtimes and systemd
live by the slogan "ask for forgiveness not permission" when running user
namespace workloads. For mknod() the assumption is that if the syscall
succeeds the device nodes are useable irrespective of whether it succeeds
in a non-initial user namespace or not. This logic was chosen explicitly
to allow for the glorious day when mknod() will actually be able to create
fully functional device nodes in user namespaces.
A specific problem people are already running into when running 4.18 rc
kernels are failing systemd services. For any distro that is run in a
container systemd services started with the PrivateDevices= property set
will fail to start since the device nodes in question cannot be
opened (cf. the arguments in [1]).

Full disclosure, Seth made the very sound argument that it is already
possible to end up with partially functional device nodes. Any filesystem
mounted with MS_NODEV set will allow mknod() to succeed but will not allow
open() to succeed. The difference to the case here is that the MS_NODEV
case is transparent to userspace since it is an explicitly set mount option
while the SB_I_NODEV case is an implicit property enforced by the kernel
and hence opaque to userspace.

[1]: https://github.com/systemd/systemd/pull/9483

Signed-off-by: Christian Brauner <christian@brauner.io>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/namei.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/fs/namei.c
+++ b/fs/namei.c
@@ -3701,8 +3701,7 @@ int vfs_mknod(struct inode *dir, struct
 	if (error)
 		return error;
 
-	if ((S_ISCHR(mode) || S_ISBLK(mode)) &&
-	    !ns_capable(dentry->d_sb->s_user_ns, CAP_MKNOD))
+	if ((S_ISCHR(mode) || S_ISBLK(mode)) && !capable(CAP_MKNOD))
 		return -EPERM;
 
 	if (!dir->i_op->mknod)

[PATCH 4.19 03/46] USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hui Peng <benquike@gmail.com>

commit 5146f95df782b0ac61abde36567e718692725c89 upstream.

The function hso_probe reads if_num from the USB device (as an u8) and uses
it without a length check to index an array, resulting in an OOB memory read
in hso_probe or hso_get_config_data.

Add a length check for both locations and updated hso_probe to bail on
error.

This issue has been assigned CVE-2018-19985.

Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Signed-off-by: Hui Peng <benquike@gmail.com>
Signed-off-by: Mathias Payer <mathias.payer@nebelwelt.net>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/usb/hso.c |   18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2807,6 +2807,12 @@ static int hso_get_config_data(struct us
 		return -EIO;
 	}
 
+	/* check if we have a valid interface */
+	if (if_num > 16) {
+		kfree(config_data);
+		return -EINVAL;
+	}
+
 	switch (config_data[if_num]) {
 	case 0x0:
 		result = 0;
@@ -2877,10 +2883,18 @@ static int hso_probe(struct usb_interfac
 
 	/* Get the interface/port specification from either driver_info or from
 	 * the device itself */
-	if (id->driver_info)
+	if (id->driver_info) {
+		/* if_num is controlled by the device, driver_info is a 0 terminated
+		 * array. Make sure, the access is in bounds! */
+		for (i = 0; i <= if_num; ++i)
+			if (((u32 *)(id->driver_info))[i] == 0)
+				goto exit;
 		port_spec = ((u32 *)(id->driver_info))[if_num];
-	else
+	} else {
 		port_spec = hso_get_config_data(interface);
+		if (port_spec < 0)
+			goto exit;
+	}
 
 	/* Check if we need to switch to alt interfaces prior to port
 	 * configuration */

[PATCH 4.19 04/46] xhci: Dont prevent USB2 bus suspend in state check intended for USB3 only

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Nyman <mathias.nyman@linux.intel.com>

commit 45f750c16cae3625014c14c77bd9005eda975d35 upstream.

The code to prevent a bus suspend if a USB3 port was still in link training
also reacted to USB2 port polling state.
This caused bus suspend to busyloop in some cases.
USB2 polling state is different from USB3, and should not prevent bus
suspend.

Limit the USB3 link training state check to USB3 root hub ports only.
The origial commit went to stable so this need to be applied there as well

Fixes: 2f31a67f01a8 ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-hub.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1507,7 +1507,8 @@ int xhci_bus_suspend(struct usb_hcd *hcd
 		portsc_buf[port_index] = 0;
 
 		/* Bail out if a USB3 port has a new device in link training */
-		if ((t1 & PORT_PLS_MASK) == XDEV_POLLING) {
+		if ((hcd->speed >= HCD_USB3) &&
+		    (t1 & PORT_PLS_MASK) == XDEV_POLLING) {
 			bus_state->bus_suspended = 0;
 			spin_unlock_irqrestore(&xhci->lock, flags);
 			xhci_dbg(xhci, "Bus suspend bailout, port in polling\n");

[PATCH 4.19 05/46] USB: xhci: fix broken_suspend placement in struct xchi_hcd

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

commit 2419f30a4a4fcaa5f35111563b4c61f1b2b26841 upstream.

As commented in the struct's definition there shouldn't be anything
underneath its 'priv[0]' member as it would break some macros.

The patch converts the broken_suspend into a bit-field and relocates it
next to to the rest of bit-fields.

Fixes: a7d57abcc8a5 ("xhci: workaround CSS timeout on AMD SNPS 3.0 xHC")
Reported-by: Oliver Neukum  <oneukum@suse.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1860,6 +1860,8 @@ struct xhci_hcd {
 	unsigned		sw_lpm_support:1;
 	/* support xHCI 1.0 spec USB2 hardware LPM */
 	unsigned		hw_lpm_support:1;
+	/* Broken Suspend flag for SNPS Suspend resume issue */
+	unsigned		broken_suspend:1;
 	/* cached usb2 extened protocol capabilites */
 	u32                     *ext_caps;
 	unsigned int            num_ext_caps;
@@ -1877,8 +1879,6 @@ struct xhci_hcd {
 	void			*dbc;
 	/* platform-specific data -- must come last */
 	unsigned long		priv[0] __aligned(sizeof(s64));
-	/* Broken Suspend flag for SNPS Suspend resume issue */
-	u8			broken_suspend;
 };
 
 /* Platform specific overrides to generic XHCI hc_driver ops */

[PATCH 4.19 06/46] USB: serial: option: add GosunCn ZTE WeLink ME3630

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jörgen Storvist <jorgen.storvist@gmail.com>

commit 70a7444c550a75584ffcfae95267058817eff6a7 upstream.

Added USB serial option driver support for GosunCn ZTE WeLink ME3630
series cellular modules for USB modes ECM/NCM and MBIM.

usb-devices output MBIM mode:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=0602 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
S:  SerialNumber=
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim

usb-devices output ECM/NCM mode:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=19d2 ProdID=1476 Rev=03.18
S:  Manufacturer=Android
S:  Product=Android
S:  SerialNumber=
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I:  If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether

Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1328,6 +1328,7 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x0602, 0xff) },	/* GosunCn ZTE WeLink ME3630 (MBIM mode) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(4) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff),
@@ -1531,6 +1532,7 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(2) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff),  /* Telewell TW-LTE 4G v2 */
 	  .driver_info = RSVD(2) },
+	{ USB_DEVICE_INTERFACE_CLASS(ZTE_VENDOR_ID, 0x1476, 0xff) },	/* GosunCn ZTE WeLink ME3630 (ECM/NCM mode) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) },

[PATCH 4.19 07/46] USB: serial: option: add HP lt4132

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tore Anderson <tore@fud.no>

commit d57ec3c83b5153217a70b561d4fb6ed96f2f7a25 upstream.

The HP lt4132 is a rebranded Huawei ME906s-158 LTE modem.

The interface with protocol 0x16 is "CDC ECM & NCM" according to the *.inf
files included with the Windows driver. Attaching the option driver to it
doesn't result in a /dev/ttyUSB* device being created, so I've excluded it.
Note that it is also excluded for corresponding Huawei-branded devices, cf.
commit d544db293a44 ("USB: support new huawei devices in option.c").

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs=  3
P:  Vendor=03f0 ProdID=a31d Rev=01.02
S:  Manufacturer=HP Inc.
S:  Product=HP lt4132 LTE/HSPA+ 4G Module
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=2mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=10 Driver=option
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=13 Driver=option
I:  If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=12 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=06 Prot=16 Driver=(none)
I:  If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=1b Driver=option

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs=  3
P:  Vendor=03f0 ProdID=a31d Rev=01.02
S:  Manufacturer=HP Inc.
S:  Product=HP lt4132 LTE/HSPA+ 4G Module
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=2mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I:  If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=06 Prot=00 Driver=cdc_ether
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=10 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=13 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=12 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option
I:  If#=0x6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=1b Driver=option

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=ff MxPS=64 #Cfgs=  3
P:  Vendor=03f0 ProdID=a31d Rev=01.02
S:  Manufacturer=HP Inc.
S:  Product=HP lt4132 LTE/HSPA+ 4G Module
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 3 Cfg#= 3 Atr=a0 MxPwr=2mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=06 Prot=14 Driver=option

Signed-off-by: Tore Anderson <tore@fud.no>
Cc: stable@vger.kernel.org
[ johan: drop id defines ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1942,7 +1942,12 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_6802, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD300, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) }, /* HP lt2523 (Novatel E371) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) },	/* HP lt2523 (Novatel E371) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x10) },	/* HP lt4132 (Huawei ME906s-158) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x12) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x13) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x14) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x1b) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);

[PATCH 4.19 08/46] USB: serial: option: add Simcom SIM7500/SIM7600 (MBIM mode)

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jörgen Storvist <jorgen.storvist@gmail.com>

commit cc6730df08a291e51e145bc65e24ffb5e2f17ab6 upstream.

Added USB serial option driver support for Simcom SIM7500/SIM7600 series
cellular modules exposing MBIM interface (VID 0x1e0e,PID 0x9003)

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 14 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1e0e ProdID=9003 Rev=03.18
S:  Manufacturer=SimTech, Incorporated
S:  Product=SimTech, Incorporated
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 5 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#= 6 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim

Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1760,6 +1760,7 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(ALINK_VENDOR_ID, SIMCOM_PRODUCT_SIM7100E),
 	  .driver_info = RSVD(5) | RSVD(6) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) },	/* Simcom SIM7500/SIM7600 MBIM mode */
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
 	  .driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) },
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D),

[PATCH 4.19 09/46] USB: serial: option: add Fibocom NL668 series

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jörgen Storvist <jorgen.storvist@gmail.com>

commit 30360224441ce89a98ed627861e735beb4010775 upstream.

Added USB serial option driver support for Fibocom NL668 series cellular
modules. Reserved USB endpoints 4, 5 and 6 for network + ADB interfaces.

usb-devices output (QMI mode)
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1508 ProdID=1001 Rev=03.18
S:  Manufacturer=Nodecom NL668 Modem
S:  Product=Nodecom NL668-CN Modem
S:  SerialNumber=
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)

usb-devices output (ECM mode)
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 17 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1508 ProdID=1001 Rev=03.18
S:  Manufacturer=Nodecom NL668 Modem
S:  Product=Nodecom NL668-CN Modem
S:  SerialNumber=
C:  #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I:  If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:  If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)

Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1949,6 +1949,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x13) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x14) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, 0xff, 0x06, 0x1b) },
+	{ USB_DEVICE(0x1508, 0x1001),						/* Fibocom NL668 */
+	  .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);

[PATCH 4.19 10/46] USB: serial: option: add Telit LN940 series

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jörgen Storvist <jorgen.storvist@gmail.com>

commit 28a86092b1753b802ef7e3de8a4c4a69a9c1bb03 upstream.

Added USB serial option driver support for Telit LN940 series cellular
modules. Covering both QMI and MBIM modes.

usb-devices output (0x1900):
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=1900 Rev=03.10
S:  Manufacturer=Telit
S:  Product=Telit LN940 Mobile Broadband
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option

usb-devices output (0x1901):
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 20 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=1901 Rev=03.10
S:  Manufacturer=Telit
S:  Product=Telit LN940 Mobile Broadband
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim

Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1164,6 +1164,10 @@ static const struct usb_device_id option
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1213, 0xff) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1214),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
+	{ USB_DEVICE(TELIT_VENDOR_ID, 0x1900),				/* Telit LN940 (QMI) */
+	  .driver_info = NCTRL(0) | RSVD(1) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff),	/* Telit LN940 (MBIM) */
+	  .driver_info = NCTRL(0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
 	  .driver_info = RSVD(1) },

[PATCH 4.19 11/46] ubifs: Handle re-linking of inodes correctly while recovery

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Weinberger <richard@nod.at>

commit e58725d51fa8da9133f3f1c54170aa2e43056b91 upstream.

UBIFS's recovery code strictly assumes that a deleted inode will never
come back, therefore it removes all data which belongs to that inode
as soon it faces an inode with link count 0 in the replay list.
Before O_TMPFILE this assumption was perfectly fine. With O_TMPFILE
it can lead to data loss upon a power-cut.

Consider a journal with entries like:
0: inode X (nlink = 0) /* O_TMPFILE was created */
1: data for inode X /* Someone writes to the temp file */
2: inode X (nlink = 0) /* inode was changed, xattr, chmod, … */
3: inode X (nlink = 1) /* inode was re-linked via linkat() */

Upon replay of entry #2 UBIFS will drop all data that belongs to inode X,
this will lead to an empty file after mounting.

As solution for this problem, scan the replay list for a re-link entry
before dropping data.

Fixes: 474b93704f32 ("ubifs: Implement O_TMPFILE")
Cc: stable@vger.kernel.org
Cc: Russell Senior <russell@personaltelco.net>
Cc: Rafał Miłecki <zajec5@gmail.com>
Reported-by: Russell Senior <russell@personaltelco.net>
Reported-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ubifs/replay.c |   37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

--- a/fs/ubifs/replay.c
+++ b/fs/ubifs/replay.c
@@ -210,6 +210,38 @@ static int trun_remove_range(struct ubif
 }
 
 /**
+ * inode_still_linked - check whether inode in question will be re-linked.
+ * @c: UBIFS file-system description object
+ * @rino: replay entry to test
+ *
+ * O_TMPFILE files can be re-linked, this means link count goes from 0 to 1.
+ * This case needs special care, otherwise all references to the inode will
+ * be removed upon the first replay entry of an inode with link count 0
+ * is found.
+ */
+static bool inode_still_linked(struct ubifs_info *c, struct replay_entry *rino)
+{
+	struct replay_entry *r;
+
+	ubifs_assert(c, rino->deletion);
+	ubifs_assert(c, key_type(c, &rino->key) == UBIFS_INO_KEY);
+
+	/*
+	 * Find the most recent entry for the inode behind @rino and check
+	 * whether it is a deletion.
+	 */
+	list_for_each_entry_reverse(r, &c->replay_list, list) {
+		ubifs_assert(c, r->sqnum >= rino->sqnum);
+		if (key_inum(c, &r->key) == key_inum(c, &rino->key))
+			return r->deletion == 0;
+
+	}
+
+	ubifs_assert(c, 0);
+	return false;
+}
+
+/**
  * apply_replay_entry - apply a replay entry to the TNC.
  * @c: UBIFS file-system description object
  * @r: replay entry to apply
@@ -236,6 +268,11 @@ static int apply_replay_entry(struct ubi
 			{
 				ino_t inum = key_inum(c, &r->key);
 
+				if (inode_still_linked(c, r)) {
+					err = 0;
+					break;
+				}
+
 				err = ubifs_tnc_remove_ino(c, inum);
 				break;
 			}

[PATCH 4.19 12/46] scsi: t10-pi: Return correct ref tag when queue has no integrity profile

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Martin K. Petersen <martin.petersen@oracle.com>

commit 60a89a3ce0cce515dc663bc1b45ac89202ad6c79 upstream.

Commit ddd0bc756983 ("block: move ref_tag calculation func to the block
layer") moved ref tag calculation from SCSI to a library function. However,
this change broke returning the correct ref tag for devices operating in
DIF mode since these do not have an associated block integrity profile.
This in turn caused read/write failures on PI-formatted disks attached to
an mpt3sas controller.

Fixes: ddd0bc756983 ("block: move ref_tag calculation func to the block layer")
Cc: stable@vger.kernel.org # 4.19+
Reported-by: John Garry <john.garry@huawei.com>
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/t10-pi.h |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/include/linux/t10-pi.h
+++ b/include/linux/t10-pi.h
@@ -39,12 +39,13 @@ struct t10_pi_tuple {
 
 static inline u32 t10_pi_ref_tag(struct request *rq)
 {
+	unsigned int shift = ilog2(queue_logical_block_size(rq->q));
+
 #ifdef CONFIG_BLK_DEV_INTEGRITY
-	return blk_rq_pos(rq) >>
-		(rq->q->integrity.interval_exp - 9) & 0xffffffff;
-#else
-	return -1U;
+	if (rq->q->integrity.interval_exp)
+		shift = rq->q->integrity.interval_exp;
 #endif
+	return blk_rq_pos(rq) >> (shift - SECTOR_SHIFT) & 0xffffffff;
 }
 
 extern const struct blk_integrity_profile t10_pi_type1_crc;

[PATCH 4.19 13/46] scsi: sd: use mempool for discard special page

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jens Axboe <axboe@kernel.dk>

commit 61cce6f6eeced5ddd9cac55e807fe28b4f18c1ba upstream.

When boxes are run near (or to) OOM, we have a problem with the discard
page allocation in sd. If we fail allocating the special page, we return
busy, and it'll get retried. But since ordering is honored for dispatch
requests, we can keep retrying this same IO and failing. Behind that IO
could be requests that want to free memory, but they never get the
chance. This means you get repeated spews of traces like this:

[1201401.625972] Call Trace:
[1201401.631748]  dump_stack+0x4d/0x65
[1201401.639445]  warn_alloc+0xec/0x190
[1201401.647335]  __alloc_pages_slowpath+0xe84/0xf30
[1201401.657722]  ? get_page_from_freelist+0x11b/0xb10
[1201401.668475]  ? __alloc_pages_slowpath+0x2e/0xf30
[1201401.679054]  __alloc_pages_nodemask+0x1f9/0x210
[1201401.689424]  alloc_pages_current+0x8c/0x110
[1201401.699025]  sd_setup_write_same16_cmnd+0x51/0x150
[1201401.709987]  sd_init_command+0x49c/0xb70
[1201401.719029]  scsi_setup_cmnd+0x9c/0x160
[1201401.727877]  scsi_queue_rq+0x4d9/0x610
[1201401.736535]  blk_mq_dispatch_rq_list+0x19a/0x360
[1201401.747113]  blk_mq_sched_dispatch_requests+0xff/0x190
[1201401.758844]  __blk_mq_run_hw_queue+0x95/0xa0
[1201401.768653]  blk_mq_run_work_fn+0x2c/0x30
[1201401.777886]  process_one_work+0x14b/0x400
[1201401.787119]  worker_thread+0x4b/0x470
[1201401.795586]  kthread+0x110/0x150
[1201401.803089]  ? rescuer_thread+0x320/0x320
[1201401.812322]  ? kthread_park+0x90/0x90
[1201401.820787]  ? do_syscall_64+0x53/0x150
[1201401.829635]  ret_from_fork+0x29/0x40

Ensure that the discard page allocation has a mempool backing, so we
know we can make progress.

Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/sd.c |   23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -132,6 +132,7 @@ static DEFINE_MUTEX(sd_ref_mutex);
 
 static struct kmem_cache *sd_cdb_cache;
 static mempool_t *sd_cdb_pool;
+static mempool_t *sd_page_pool;
 
 static const char *sd_cache_types[] = {
 	"write through", "none", "write back",
@@ -758,9 +759,10 @@ static int sd_setup_unmap_cmnd(struct sc
 	unsigned int data_len = 24;
 	char *buf;
 
-	rq->special_vec.bv_page = alloc_page(GFP_ATOMIC | __GFP_ZERO);
+	rq->special_vec.bv_page = mempool_alloc(sd_page_pool, GFP_ATOMIC);
 	if (!rq->special_vec.bv_page)
 		return BLKPREP_DEFER;
+	clear_highpage(rq->special_vec.bv_page);
 	rq->special_vec.bv_offset = 0;
 	rq->special_vec.bv_len = data_len;
 	rq->rq_flags |= RQF_SPECIAL_PAYLOAD;
@@ -791,9 +793,10 @@ static int sd_setup_write_same16_cmnd(st
 	u32 nr_sectors = blk_rq_sectors(rq) >> (ilog2(sdp->sector_size) - 9);
 	u32 data_len = sdp->sector_size;
 
-	rq->special_vec.bv_page = alloc_page(GFP_ATOMIC | __GFP_ZERO);
+	rq->special_vec.bv_page = mempool_alloc(sd_page_pool, GFP_ATOMIC);
 	if (!rq->special_vec.bv_page)
 		return BLKPREP_DEFER;
+	clear_highpage(rq->special_vec.bv_page);
 	rq->special_vec.bv_offset = 0;
 	rq->special_vec.bv_len = data_len;
 	rq->rq_flags |= RQF_SPECIAL_PAYLOAD;
@@ -821,9 +824,10 @@ static int sd_setup_write_same10_cmnd(st
 	u32 nr_sectors = blk_rq_sectors(rq) >> (ilog2(sdp->sector_size) - 9);
 	u32 data_len = sdp->sector_size;
 
-	rq->special_vec.bv_page = alloc_page(GFP_ATOMIC | __GFP_ZERO);
+	rq->special_vec.bv_page = mempool_alloc(sd_page_pool, GFP_ATOMIC);
 	if (!rq->special_vec.bv_page)
 		return BLKPREP_DEFER;
+	clear_highpage(rq->special_vec.bv_page);
 	rq->special_vec.bv_offset = 0;
 	rq->special_vec.bv_len = data_len;
 	rq->rq_flags |= RQF_SPECIAL_PAYLOAD;
@@ -1287,7 +1291,7 @@ static void sd_uninit_command(struct scs
 	u8 *cmnd;
 
 	if (rq->rq_flags & RQF_SPECIAL_PAYLOAD)
-		__free_page(rq->special_vec.bv_page);
+		mempool_free(rq->special_vec.bv_page, sd_page_pool);
 
 	if (SCpnt->cmnd != scsi_req(rq)->cmd) {
 		cmnd = SCpnt->cmnd;
@@ -3635,6 +3639,13 @@ static int __init init_sd(void)
 		goto err_out_cache;
 	}
 
+	sd_page_pool = mempool_create_page_pool(SD_MEMPOOL_SIZE, 0);
+	if (!sd_page_pool) {
+		printk(KERN_ERR "sd: can't init discard page pool\n");
+		err = -ENOMEM;
+		goto err_out_ppool;
+	}
+
 	err = scsi_register_driver(&sd_template.gendrv);
 	if (err)
 		goto err_out_driver;
@@ -3642,6 +3653,9 @@ static int __init init_sd(void)
 	return 0;
 
 err_out_driver:
+	mempool_destroy(sd_page_pool);
+
+err_out_ppool:
 	mempool_destroy(sd_cdb_pool);
 
 err_out_cache:
@@ -3668,6 +3682,7 @@ static void __exit exit_sd(void)
 
 	scsi_unregister_driver(&sd_template.gendrv);
 	mempool_destroy(sd_cdb_pool);
+	mempool_destroy(sd_page_pool);
 	kmem_cache_destroy(sd_cdb_cache);
 
 	class_unregister(&sd_disk_class);

[PATCH 4.19 14/46] mmc: core: Reset HPI enabled state during re-init and in case of errors

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ulf Hansson <ulf.hansson@linaro.org>

commit a0741ba40a009f97c019ae7541dc61c1fdf41efb upstream.

During a re-initialization of the eMMC card, we may fail to re-enable HPI.
In these cases, that isn't properly reflected in the card->ext_csd.hpi_en
bit, as it keeps being set. This may cause following attempts to use HPI,
even if's not enabled. Let's fix this!

Fixes: eb0d8f135b67 ("mmc: core: support HPI send command")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/core/mmc.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1782,9 +1782,11 @@ static int mmc_init_card(struct mmc_host
 		if (err) {
 			pr_warn("%s: Enabling HPI failed\n",
 				mmc_hostname(card->host));
+			card->ext_csd.hpi_en = 0;
 			err = 0;
-		} else
+		} else {
 			card->ext_csd.hpi_en = 1;
+		}
 	}
 
 	/*

[PATCH 4.19 15/46] mmc: core: Allow BKOPS and CACHE ctrl even if no HPI support

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ulf Hansson <ulf.hansson@linaro.org>

commit ba9f39a785a9977e72233000711ef1eb48203551 upstream.

In commit 5320226a0512 ("mmc: core: Disable HPI for certain Hynix eMMC
cards"), then intent was to prevent HPI from being used for some eMMC
cards, which didn't properly support it. However, that went too far, as
even BKOPS and CACHE ctrl became prevented. Let's restore those parts and
allow BKOPS and CACHE ctrl even if HPI isn't supported.

Fixes: 5320226a0512 ("mmc: core: Disable HPI for certain Hynix eMMC cards")
Cc: Pratibhasagar V <pratibha@codeaurora.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/core/mmc.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -526,8 +526,7 @@ static int mmc_decode_ext_csd(struct mmc
 			card->cid.year += 16;
 
 		/* check whether the eMMC card supports BKOPS */
-		if (!mmc_card_broken_hpi(card) &&
-		    ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) {
+		if (ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) {
 			card->ext_csd.bkops = 1;
 			card->ext_csd.man_bkops_en =
 					(ext_csd[EXT_CSD_BKOPS_EN] &
@@ -1793,8 +1792,7 @@ static int mmc_init_card(struct mmc_host
 	 * If cache size is higher than 0, this indicates
 	 * the existence of cache and it can be turned on.
 	 */
-	if (!mmc_card_broken_hpi(card) &&
-	    card->ext_csd.cache_size > 0) {
+	if (card->ext_csd.cache_size > 0) {
 		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 				EXT_CSD_CACHE_CTRL, 1,
 				card->ext_csd.generic_cmd6_time);

[PATCH 4.19 16/46] mmc: core: Use a minimum 1600ms timeout when enabling CACHE ctrl

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ulf Hansson <ulf.hansson@linaro.org>

commit e3ae3401aa19432ee4943eb0bbc2ec704d07d793 upstream.

Some eMMCs from Micron have been reported to need ~800 ms timeout, while
enabling the CACHE ctrl after running sudden power failure tests. The
needed timeout is greater than what the card specifies as its generic CMD6
timeout, through the EXT_CSD register, hence the problem.

Normally we would introduce a card quirk to extend the timeout for these
specific Micron cards. However, due to the rather complicated debug process
needed to find out the error, let's simply use a minimum timeout of 1600ms,
the double of what has been reported, for all cards when enabling CACHE
ctrl.

Reported-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reported-by: Andreas Dannenberg <dannenberg@ti.com>
Reported-by: Faiz Abbas <faiz_abbas@ti.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/core/mmc.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -30,6 +30,7 @@
 #include "pwrseq.h"
 
 #define DEFAULT_CMD6_TIMEOUT_MS	500
+#define MIN_CACHE_EN_TIMEOUT_MS 1600
 
 static const unsigned int tran_exp[] = {
 	10000,		100000,		1000000,	10000000,
@@ -1789,13 +1790,18 @@ static int mmc_init_card(struct mmc_host
 	}
 
 	/*
-	 * If cache size is higher than 0, this indicates
-	 * the existence of cache and it can be turned on.
+	 * If cache size is higher than 0, this indicates the existence of cache
+	 * and it can be turned on. Note that some eMMCs from Micron has been
+	 * reported to need ~800 ms timeout, while enabling the cache after
+	 * sudden power failure tests. Let's extend the timeout to a minimum of
+	 * DEFAULT_CACHE_EN_TIMEOUT_MS and do it for all cards.
 	 */
 	if (card->ext_csd.cache_size > 0) {
+		unsigned int timeout_ms = MIN_CACHE_EN_TIMEOUT_MS;
+
+		timeout_ms = max(card->ext_csd.generic_cmd6_time, timeout_ms);
 		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-				EXT_CSD_CACHE_CTRL, 1,
-				card->ext_csd.generic_cmd6_time);
+				EXT_CSD_CACHE_CTRL, 1, timeout_ms);
 		if (err && err != -EBADMSG)
 			goto free_card;
 

[PATCH 4.19 17/46] mmc: omap_hsmmc: fix DMA API warning

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Russell King <rmk+kernel@armlinux.org.uk>

commit 0b479790684192ab7024ce6a621f93f6d0a64d92 upstream.

While booting with rootfs on MMC, the following warning is encountered
on OMAP4430:

omap-dma-engine 4a056000.dma-controller: DMA-API: mapping sg segment longer than device claims to support [len=69632] [max=65536]

This is because the DMA engine has a default maximum segment size of 64K
but HSMMC sets:

        mmc->max_blk_size = 512;       /* Block Length at max can be 1024 */
        mmc->max_blk_count = 0xFFFF;    /* No. of Blocks is 16 bits */
        mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
        mmc->max_seg_size = mmc->max_req_size;

which ends up telling the block layer that we support a maximum segment
size of 65535*512, which exceeds the advertised DMA engine capabilities.

Fix this by clamping the maximum segment size to the lower of the
maximum request size and of the DMA engine device used for either DMA
channel.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/omap_hsmmc.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -2066,7 +2066,6 @@ static int omap_hsmmc_probe(struct platf
 	mmc->max_blk_size = 512;       /* Block Length at max can be 1024 */
 	mmc->max_blk_count = 0xFFFF;    /* No. of Blocks is 16 bits */
 	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
-	mmc->max_seg_size = mmc->max_req_size;
 
 	mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
 		     MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE | MMC_CAP_CMD23;
@@ -2096,6 +2095,17 @@ static int omap_hsmmc_probe(struct platf
 		goto err_irq;
 	}
 
+	/*
+	 * Limit the maximum segment size to the lower of the request size
+	 * and the DMA engine device segment size limits.  In reality, with
+	 * 32-bit transfers, the DMA engine can do longer segments than this
+	 * but there is no way to represent that in the DMA model - if we
+	 * increase this figure here, we get warnings from the DMA API debug.
+	 */
+	mmc->max_seg_size = min3(mmc->max_req_size,
+			dma_get_max_seg_size(host->rx_chan->device->dev),
+			dma_get_max_seg_size(host->tx_chan->device->dev));
+
 	/* Request IRQ for MMC operations */
 	ret = devm_request_irq(&pdev->dev, host->irq, omap_hsmmc_irq, 0,
 			mmc_hostname(mmc), host);

[PATCH 4.19 18/46] gpio: max7301: fix driver for use with CONFIG_VMAP_STACK

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christophe Leroy <christophe.leroy@c-s.fr>

commit abf221d2f51b8ce7b9959a8953f880a8b0a1400d upstream.

spi_read() and spi_write() require DMA-safe memory. When
CONFIG_VMAP_STACK is selected, those functions cannot be used
with buffers on stack.

This patch replaces calls to spi_read() and spi_write() by
spi_write_then_read() which doesn't require DMA-safe buffers.

Fixes: 0c36ec314735 ("gpio: gpio driver for max7301 SPI GPIO expander")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpio/gpio-max7301.c |   12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

--- a/drivers/gpio/gpio-max7301.c
+++ b/drivers/gpio/gpio-max7301.c
@@ -25,7 +25,7 @@ static int max7301_spi_write(struct devi
 	struct spi_device *spi = to_spi_device(dev);
 	u16 word = ((reg & 0x7F) << 8) | (val & 0xFF);
 
-	return spi_write(spi, (const u8 *)&word, sizeof(word));
+	return spi_write_then_read(spi, &word, sizeof(word), NULL, 0);
 }
 
 /* A read from the MAX7301 means two transfers; here, one message each */
@@ -37,14 +37,8 @@ static int max7301_spi_read(struct devic
 	struct spi_device *spi = to_spi_device(dev);
 
 	word = 0x8000 | (reg << 8);
-	ret = spi_write(spi, (const u8 *)&word, sizeof(word));
-	if (ret)
-		return ret;
-	/*
-	 * This relies on the fact, that a transfer with NULL tx_buf shifts out
-	 * zero bytes (=NOOP for MAX7301)
-	 */
-	ret = spi_read(spi, (u8 *)&word, sizeof(word));
+	ret = spi_write_then_read(spi, &word, sizeof(word), &word,
+				  sizeof(word));
 	if (ret)
 		return ret;
 	return word & 0xff;

[PATCH 4.19 19/46] gpiolib-acpi: Only defer request_irq for GpioInt ACPI event handlers

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans de Goede <hdegoede@redhat.com>

commit e59f5e08ece1060073d92c66ded52e1f2c43b5bb upstream.

Commit 78d3a92edbfb ("gpiolib-acpi: Register GpioInt ACPI event handlers
from a late_initcall") deferred the entire acpi_gpiochip_request_interrupt
call for each event resource.

This means it also delays the gpiochip_request_own_desc(..., "ACPI:Event")
call. This is a problem if some AML code reads the GPIO pin before we
run the deferred acpi_gpiochip_request_interrupt, because in that case
acpi_gpio_adr_space_handler() will already have called
gpiochip_request_own_desc(..., "ACPI:OpRegion") causing the call from
acpi_gpiochip_request_interrupt to fail with -EBUSY and we will fail to
register an event handler.

acpi_gpio_adr_space_handler is prepared for acpi_gpiochip_request_interrupt
already having claimed the pin, but the other way around does not work.

One example of a problem this causes, is the event handler for the OTG
ID pin on a Prowise PT301 tablet not registering, keeping the port stuck
in whatever mode it was in during boot and e.g. only allowing charging
after a reboot.

This commit fixes this by only deferring the request_irq call and the
initial run of edge-triggered IRQs instead of deferring all of
acpi_gpiochip_request_interrupt.

Cc: stable@vger.kernel.org
Fixes: 78d3a92edbfb ("gpiolib-acpi: Register GpioInt ACPI event ...")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpio/gpiolib-acpi.c |  144 +++++++++++++++++++++++++-------------------
 1 file changed, 84 insertions(+), 60 deletions(-)

--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -23,11 +23,28 @@
 
 #include "gpiolib.h"
 
+/**
+ * struct acpi_gpio_event - ACPI GPIO event handler data
+ *
+ * @node:	  list-entry of the events list of the struct acpi_gpio_chip
+ * @handle:	  handle of ACPI method to execute when the IRQ triggers
+ * @handler:	  irq_handler to pass to request_irq when requesting the IRQ
+ * @pin:	  GPIO pin number on the gpio_chip
+ * @irq:	  Linux IRQ number for the event, for request_ / free_irq
+ * @irqflags:     flags to pass to request_irq when requesting the IRQ
+ * @irq_is_wake:  If the ACPI flags indicate the IRQ is a wakeup source
+ * @is_requested: True if request_irq has been done
+ * @desc:	  gpio_desc for the GPIO pin for this event
+ */
 struct acpi_gpio_event {
 	struct list_head node;
 	acpi_handle handle;
+	irq_handler_t handler;
 	unsigned int pin;
 	unsigned int irq;
+	unsigned long irqflags;
+	bool irq_is_wake;
+	bool irq_requested;
 	struct gpio_desc *desc;
 };
 
@@ -53,10 +70,10 @@ struct acpi_gpio_chip {
 
 /*
  * For gpiochips which call acpi_gpiochip_request_interrupts() before late_init
- * (so builtin drivers) we register the ACPI GpioInt event handlers from a
+ * (so builtin drivers) we register the ACPI GpioInt IRQ handlers from a
  * late_initcall_sync handler, so that other builtin drivers can register their
  * OpRegions before the event handlers can run.  This list contains gpiochips
- * for which the acpi_gpiochip_request_interrupts() has been deferred.
+ * for which the acpi_gpiochip_request_irqs() call has been deferred.
  */
 static DEFINE_MUTEX(acpi_gpio_deferred_req_irqs_lock);
 static LIST_HEAD(acpi_gpio_deferred_req_irqs_list);
@@ -137,8 +154,42 @@ bool acpi_gpio_get_irq_resource(struct a
 }
 EXPORT_SYMBOL_GPL(acpi_gpio_get_irq_resource);
 
-static acpi_status acpi_gpiochip_request_interrupt(struct acpi_resource *ares,
-						   void *context)
+static void acpi_gpiochip_request_irq(struct acpi_gpio_chip *acpi_gpio,
+				      struct acpi_gpio_event *event)
+{
+	int ret, value;
+
+	ret = request_threaded_irq(event->irq, NULL, event->handler,
+				   event->irqflags, "ACPI:Event", event);
+	if (ret) {
+		dev_err(acpi_gpio->chip->parent,
+			"Failed to setup interrupt handler for %d\n",
+			event->irq);
+		return;
+	}
+
+	if (event->irq_is_wake)
+		enable_irq_wake(event->irq);
+
+	event->irq_requested = true;
+
+	/* Make sure we trigger the initial state of edge-triggered IRQs */
+	value = gpiod_get_raw_value_cansleep(event->desc);
+	if (((event->irqflags & IRQF_TRIGGER_RISING) && value == 1) ||
+	    ((event->irqflags & IRQF_TRIGGER_FALLING) && value == 0))
+		event->handler(event->irq, event);
+}
+
+static void acpi_gpiochip_request_irqs(struct acpi_gpio_chip *acpi_gpio)
+{
+	struct acpi_gpio_event *event;
+
+	list_for_each_entry(event, &acpi_gpio->events, node)
+		acpi_gpiochip_request_irq(acpi_gpio, event);
+}
+
+static acpi_status acpi_gpiochip_alloc_event(struct acpi_resource *ares,
+					     void *context)
 {
 	struct acpi_gpio_chip *acpi_gpio = context;
 	struct gpio_chip *chip = acpi_gpio->chip;
@@ -147,8 +198,7 @@ static acpi_status acpi_gpiochip_request
 	struct acpi_gpio_event *event;
 	irq_handler_t handler = NULL;
 	struct gpio_desc *desc;
-	unsigned long irqflags;
-	int ret, pin, irq, value;
+	int ret, pin, irq;
 
 	if (!acpi_gpio_get_irq_resource(ares, &agpio))
 		return AE_OK;
@@ -179,8 +229,6 @@ static acpi_status acpi_gpiochip_request
 
 	gpiod_direction_input(desc);
 
-	value = gpiod_get_value_cansleep(desc);
-
 	ret = gpiochip_lock_as_irq(chip, pin);
 	if (ret) {
 		dev_err(chip->parent, "Failed to lock GPIO as interrupt\n");
@@ -193,64 +241,42 @@ static acpi_status acpi_gpiochip_request
 		goto fail_unlock_irq;
 	}
 
-	irqflags = IRQF_ONESHOT;
+	event = kzalloc(sizeof(*event), GFP_KERNEL);
+	if (!event)
+		goto fail_unlock_irq;
+
+	event->irqflags = IRQF_ONESHOT;
 	if (agpio->triggering == ACPI_LEVEL_SENSITIVE) {
 		if (agpio->polarity == ACPI_ACTIVE_HIGH)
-			irqflags |= IRQF_TRIGGER_HIGH;
+			event->irqflags |= IRQF_TRIGGER_HIGH;
 		else
-			irqflags |= IRQF_TRIGGER_LOW;
+			event->irqflags |= IRQF_TRIGGER_LOW;
 	} else {
 		switch (agpio->polarity) {
 		case ACPI_ACTIVE_HIGH:
-			irqflags |= IRQF_TRIGGER_RISING;
+			event->irqflags |= IRQF_TRIGGER_RISING;
 			break;
 		case ACPI_ACTIVE_LOW:
-			irqflags |= IRQF_TRIGGER_FALLING;
+			event->irqflags |= IRQF_TRIGGER_FALLING;
 			break;
 		default:
-			irqflags |= IRQF_TRIGGER_RISING |
-				    IRQF_TRIGGER_FALLING;
+			event->irqflags |= IRQF_TRIGGER_RISING |
+					   IRQF_TRIGGER_FALLING;
 			break;
 		}
 	}
 
-	event = kzalloc(sizeof(*event), GFP_KERNEL);
-	if (!event)
-		goto fail_unlock_irq;
-
 	event->handle = evt_handle;
+	event->handler = handler;
 	event->irq = irq;
+	event->irq_is_wake = agpio->wake_capable == ACPI_WAKE_CAPABLE;
 	event->pin = pin;
 	event->desc = desc;
 
-	ret = request_threaded_irq(event->irq, NULL, handler, irqflags,
-				   "ACPI:Event", event);
-	if (ret) {
-		dev_err(chip->parent,
-			"Failed to setup interrupt handler for %d\n",
-			event->irq);
-		goto fail_free_event;
-	}
-
-	if (agpio->wake_capable == ACPI_WAKE_CAPABLE)
-		enable_irq_wake(irq);
-
 	list_add_tail(&event->node, &acpi_gpio->events);
 
-	/*
-	 * Make sure we trigger the initial state of the IRQ when using RISING
-	 * or FALLING.  Note we run the handlers on late_init, the AML code
-	 * may refer to OperationRegions from other (builtin) drivers which
-	 * may be probed after us.
-	 */
-	if (((irqflags & IRQF_TRIGGER_RISING) && value == 1) ||
-	    ((irqflags & IRQF_TRIGGER_FALLING) && value == 0))
-		handler(event->irq, event);
-
 	return AE_OK;
 
-fail_free_event:
-	kfree(event);
 fail_unlock_irq:
 	gpiochip_unlock_as_irq(chip, pin);
 fail_free_desc:
@@ -287,6 +313,9 @@ void acpi_gpiochip_request_interrupts(st
 	if (ACPI_FAILURE(status))
 		return;
 
+	acpi_walk_resources(handle, "_AEI",
+			    acpi_gpiochip_alloc_event, acpi_gpio);
+
 	mutex_lock(&acpi_gpio_deferred_req_irqs_lock);
 	defer = !acpi_gpio_deferred_req_irqs_done;
 	if (defer)
@@ -297,8 +326,7 @@ void acpi_gpiochip_request_interrupts(st
 	if (defer)
 		return;
 
-	acpi_walk_resources(handle, "_AEI",
-			    acpi_gpiochip_request_interrupt, acpi_gpio);
+	acpi_gpiochip_request_irqs(acpi_gpio);
 }
 EXPORT_SYMBOL_GPL(acpi_gpiochip_request_interrupts);
 
@@ -335,10 +363,13 @@ void acpi_gpiochip_free_interrupts(struc
 	list_for_each_entry_safe_reverse(event, ep, &acpi_gpio->events, node) {
 		struct gpio_desc *desc;
 
-		if (irqd_is_wakeup_set(irq_get_irq_data(event->irq)))
-			disable_irq_wake(event->irq);
+		if (event->irq_requested) {
+			if (event->irq_is_wake)
+				disable_irq_wake(event->irq);
+
+			free_irq(event->irq, event);
+		}
 
-		free_irq(event->irq, event);
 		desc = event->desc;
 		if (WARN_ON(IS_ERR(desc)))
 			continue;
@@ -1204,23 +1235,16 @@ bool acpi_can_fallback_to_crs(struct acp
 	return con_id == NULL;
 }
 
-/* Run deferred acpi_gpiochip_request_interrupts() */
-static int acpi_gpio_handle_deferred_request_interrupts(void)
+/* Run deferred acpi_gpiochip_request_irqs() */
+static int acpi_gpio_handle_deferred_request_irqs(void)
 {
 	struct acpi_gpio_chip *acpi_gpio, *tmp;
 
 	mutex_lock(&acpi_gpio_deferred_req_irqs_lock);
 	list_for_each_entry_safe(acpi_gpio, tmp,
 				 &acpi_gpio_deferred_req_irqs_list,
-				 deferred_req_irqs_list_entry) {
-		acpi_handle handle;
-
-		handle = ACPI_HANDLE(acpi_gpio->chip->parent);
-		acpi_walk_resources(handle, "_AEI",
-				    acpi_gpiochip_request_interrupt, acpi_gpio);
-
-		list_del_init(&acpi_gpio->deferred_req_irqs_list_entry);
-	}
+				 deferred_req_irqs_list_entry)
+		acpi_gpiochip_request_irqs(acpi_gpio);
 
 	acpi_gpio_deferred_req_irqs_done = true;
 	mutex_unlock(&acpi_gpio_deferred_req_irqs_lock);
@@ -1228,4 +1252,4 @@ static int acpi_gpio_handle_deferred_req
 	return 0;
 }
 /* We must use _sync so that this runs after the first deferred_probe run */
-late_initcall_sync(acpi_gpio_handle_deferred_request_interrupts);
+late_initcall_sync(acpi_gpio_handle_deferred_request_irqs);

[PATCH 4.19 20/46] posix-timers: Fix division by zero bug

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

commit 0e334db6bb4b1fd1e2d72c1f3d8f004313cd9f94 upstream.

The signal delivery path of posix-timers can try to rearm the timer even if
the interval is zero. That's handled for the common case (hrtimer) but not
for alarm timers. In that case the forwarding function raises a division by
zero exception.

The handling for hrtimer based posix timers is wrong because it marks the
timer as active despite the fact that it is stopped.

Move the check from common_hrtimer_rearm() to posixtimer_rearm() to cure
both issues.

Reported-by: syzbot+9d38bedac9cc77b8ad5e@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: sboyd@kernel.org
Cc: stable@vger.kernel.org
Cc: syzkaller-bugs@googlegroups.com
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1812171328050.1880@nanos.tec.linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/time/posix-timers.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

--- a/kernel/time/posix-timers.c
+++ b/kernel/time/posix-timers.c
@@ -289,9 +289,6 @@ static void common_hrtimer_rearm(struct
 {
 	struct hrtimer *timer = &timr->it.real.timer;
 
-	if (!timr->it_interval)
-		return;
-
 	timr->it_overrun += hrtimer_forward(timer, timer->base->get_time(),
 					    timr->it_interval);
 	hrtimer_restart(timer);
@@ -317,7 +314,7 @@ void posixtimer_rearm(struct siginfo *in
 	if (!timr)
 		return;
 
-	if (timr->it_requeue_pending == info->si_sys_private) {
+	if (timr->it_interval && timr->it_requeue_pending == info->si_sys_private) {
 		timr->kclock->timer_rearm(timr);
 
 		timr->it_active = 1;

[PATCH 4.19 21/46] KVM: X86: Fix NULL deref in vcpu_scan_ioapic

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wanpeng Li <wanpengli@tencent.com>

commit dcbd3e49c2f0b2c2d8a321507ff8f3de4af76d7c upstream.

Reported by syzkaller:

    CPU: 1 PID: 5962 Comm: syz-executor118 Not tainted 4.20.0-rc6+ #374
    Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
    RIP: 0010:kvm_apic_hw_enabled arch/x86/kvm/lapic.h:169 [inline]
    RIP: 0010:vcpu_scan_ioapic arch/x86/kvm/x86.c:7449 [inline]
    RIP: 0010:vcpu_enter_guest arch/x86/kvm/x86.c:7602 [inline]
    RIP: 0010:vcpu_run arch/x86/kvm/x86.c:7874 [inline]
    RIP: 0010:kvm_arch_vcpu_ioctl_run+0x5296/0x7320 arch/x86/kvm/x86.c:8074
    Call Trace:
	 kvm_vcpu_ioctl+0x5c8/0x1150 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2596
	 vfs_ioctl fs/ioctl.c:46 [inline]
	 file_ioctl fs/ioctl.c:509 [inline]
	 do_vfs_ioctl+0x1de/0x1790 fs/ioctl.c:696
	 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:713
	 __do_sys_ioctl fs/ioctl.c:720 [inline]
	 __se_sys_ioctl fs/ioctl.c:718 [inline]
	 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
	 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
	 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The reason is that the testcase writes hyperv synic HV_X64_MSR_SINT14 msr
and triggers scan ioapic logic to load synic vectors into EOI exit bitmap.
However, irqchip is not initialized by this simple testcase, ioapic/apic
objects should not be accessed.

This patch fixes it by also considering whether or not apic is present.

Reported-by: syzbot+39810e6c400efadfef71@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/x86.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -7304,7 +7304,7 @@ void kvm_make_scan_ioapic_request(struct
 
 static void vcpu_scan_ioapic(struct kvm_vcpu *vcpu)
 {
-	if (!kvm_apic_hw_enabled(vcpu->arch.apic))
+	if (!kvm_apic_present(vcpu))
 		return;
 
 	bitmap_zero(vcpu->arch.ioapic_handled_vectors, 256);

[PATCH 4.19 22/46] kvm: x86: Add AMDs EX_CFG to the list of ignored MSRs

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eduardo Habkost <ehabkost@redhat.com>

commit 0e1b869fff60c81b510c2d00602d778f8f59dd9a upstream.

Some guests OSes (including Windows 10) write to MSR 0xc001102c
on some cases (possibly while trying to apply a CPU errata).
Make KVM ignore reads and writes to that MSR, so the guest won't
crash.

The MSR is documented as "Execution Unit Configuration (EX_CFG)",
at AMD's "BIOS and Kernel Developer's Guide (BKDG) for AMD Family
15h Models 00h-0Fh Processors".

Cc: stable@vger.kernel.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/msr-index.h |    1 +
 arch/x86/kvm/x86.c               |    2 ++
 2 files changed, 3 insertions(+)

--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -389,6 +389,7 @@
 #define MSR_F15H_NB_PERF_CTR		0xc0010241
 #define MSR_F15H_PTSC			0xc0010280
 #define MSR_F15H_IC_CFG			0xc0011021
+#define MSR_F15H_EX_CFG			0xc001102c
 
 /* Fam 10h MSRs */
 #define MSR_FAM10H_MMIO_CONF_BASE	0xc0010058
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2343,6 +2343,7 @@ int kvm_set_msr_common(struct kvm_vcpu *
 	case MSR_AMD64_PATCH_LOADER:
 	case MSR_AMD64_BU_CFG2:
 	case MSR_AMD64_DC_CFG:
+	case MSR_F15H_EX_CFG:
 		break;
 
 	case MSR_IA32_UCODE_REV:
@@ -2638,6 +2639,7 @@ int kvm_get_msr_common(struct kvm_vcpu *
 	case MSR_AMD64_BU_CFG2:
 	case MSR_IA32_PERF_CTL:
 	case MSR_AMD64_DC_CFG:
+	case MSR_F15H_EX_CFG:
 		msr_info->data = 0;
 		break;
 	case MSR_F15H_PERF_CTL0 ... MSR_F15H_PERF_CTR5:

[PATCH 4.19 23/46] KVM: Fix UAF in nested posted interrupt processing

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cfir Cohen <cfir@google.com>

commit c2dd5146e9fe1f22c77c1b011adf84eea0245806 upstream.

nested_get_vmcs12_pages() processes the posted_intr address in vmcs12. It
caches the kmap()ed page object and pointer, however, it doesn't handle
errors correctly: it's possible to cache a valid pointer, then release
the page and later dereference the dangling pointer.

I was able to reproduce with the following steps:

1. Call vmlaunch with valid posted_intr_desc_addr but an invalid
MSR_EFER. This causes nested_get_vmcs12_pages() to cache the kmap()ed
pi_desc_page and pi_desc. Later the invalid EFER value fails
check_vmentry_postreqs() which fails the first vmlaunch.

2. Call vmlanuch with a valid EFER but an invalid posted_intr_desc_addr
(I set it to 2G - 0x80). The second time we call nested_get_vmcs12_pages
pi_desc_page is unmapped and released and pi_desc_page is set to NULL
(the "shouldn't happen" clause). Due to the invalid
posted_intr_desc_addr, kvm_vcpu_gpa_to_page() fails and
nested_get_vmcs12_pages() returns. It doesn't return an error value so
vmlaunch proceeds. Note that at this time we have a dangling pointer in
vmx->nested.pi_desc and POSTED_INTR_DESC_ADDR in L0's vmcs.

3. Issue an IPI in L2 guest code. This triggers a call to
vmx_complete_nested_posted_interrupt() and pi_test_and_clear_on() which
dereferences the dangling pointer.

Vulnerable code requires nested and enable_apicv variables to be set to
true. The host CPU must also support posted interrupts.

Fixes: 5e2f30b756a37 "KVM: nVMX: get rid of nested_get_page()"
Cc: stable@vger.kernel.org
Reviewed-by: Andy Honig <ahonig@google.com>
Signed-off-by: Cfir Cohen <cfir@google.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/vmx.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -11471,6 +11471,8 @@ static void nested_get_vmcs12_pages(stru
 			kunmap(vmx->nested.pi_desc_page);
 			kvm_release_page_dirty(vmx->nested.pi_desc_page);
 			vmx->nested.pi_desc_page = NULL;
+			vmx->nested.pi_desc = NULL;
+			vmcs_write64(POSTED_INTR_DESC_ADDR, -1ull);
 		}
 		page = kvm_vcpu_gpa_to_page(vcpu, vmcs12->posted_intr_desc_addr);
 		if (is_error_page(page))

[PATCH 4.19 24/46] Drivers: hv: vmbus: Return -EINVAL for the sys files for unopened channels

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dexuan Cui <decui@microsoft.com>

commit fc96df16a1ce80cbb3c316ab7d4dc8cd5c2852ce upstream.

Before 98f4c651762c, we returned zeros for unopened channels.
With 98f4c651762c, we started to return random on-stack values.

We'd better return -EINVAL instead.

Fixes: 98f4c651762c ("hv: move ringbuffer bus attributes to dev_groups")
Cc: stable@vger.kernel.org
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hv/vmbus_drv.c |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -316,6 +316,8 @@ static ssize_t out_intr_mask_show(struct
 
 	if (!hv_dev->channel)
 		return -ENODEV;
+	if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+		return -EINVAL;
 	hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
 	return sprintf(buf, "%d\n", outbound.current_interrupt_mask);
 }
@@ -329,6 +331,8 @@ static ssize_t out_read_index_show(struc
 
 	if (!hv_dev->channel)
 		return -ENODEV;
+	if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+		return -EINVAL;
 	hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
 	return sprintf(buf, "%d\n", outbound.current_read_index);
 }
@@ -343,6 +347,8 @@ static ssize_t out_write_index_show(stru
 
 	if (!hv_dev->channel)
 		return -ENODEV;
+	if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+		return -EINVAL;
 	hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
 	return sprintf(buf, "%d\n", outbound.current_write_index);
 }
@@ -357,6 +363,8 @@ static ssize_t out_read_bytes_avail_show
 
 	if (!hv_dev->channel)
 		return -ENODEV;
+	if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+		return -EINVAL;
 	hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
 	return sprintf(buf, "%d\n", outbound.bytes_avail_toread);
 }
@@ -371,6 +379,8 @@ static ssize_t out_write_bytes_avail_sho
 
 	if (!hv_dev->channel)
 		return -ENODEV;
+	if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+		return -EINVAL;
 	hv_ringbuffer_get_debuginfo(&hv_dev->channel->outbound, &outbound);
 	return sprintf(buf, "%d\n", outbound.bytes_avail_towrite);
 }
@@ -384,6 +394,8 @@ static ssize_t in_intr_mask_show(struct
 
 	if (!hv_dev->channel)
 		return -ENODEV;
+	if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+		return -EINVAL;
 	hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
 	return sprintf(buf, "%d\n", inbound.current_interrupt_mask);
 }
@@ -397,6 +409,8 @@ static ssize_t in_read_index_show(struct
 
 	if (!hv_dev->channel)
 		return -ENODEV;
+	if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+		return -EINVAL;
 	hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
 	return sprintf(buf, "%d\n", inbound.current_read_index);
 }
@@ -410,6 +424,8 @@ static ssize_t in_write_index_show(struc
 
 	if (!hv_dev->channel)
 		return -ENODEV;
+	if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+		return -EINVAL;
 	hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
 	return sprintf(buf, "%d\n", inbound.current_write_index);
 }
@@ -424,6 +440,8 @@ static ssize_t in_read_bytes_avail_show(
 
 	if (!hv_dev->channel)
 		return -ENODEV;
+	if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+		return -EINVAL;
 	hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
 	return sprintf(buf, "%d\n", inbound.bytes_avail_toread);
 }
@@ -438,6 +456,8 @@ static ssize_t in_write_bytes_avail_show
 
 	if (!hv_dev->channel)
 		return -ENODEV;
+	if (hv_dev->channel->state != CHANNEL_OPENED_STATE)
+		return -EINVAL;
 	hv_ringbuffer_get_debuginfo(&hv_dev->channel->inbound, &inbound);
 	return sprintf(buf, "%d\n", inbound.bytes_avail_towrite);
 }

[PATCH 4.19 25/46] futex: Cure exit race

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Gleixner <tglx@linutronix.de>

commit da791a667536bf8322042e38ca85d55a78d3c273 upstream.

Stefan reported, that the glibc tst-robustpi4 test case fails
occasionally. That case creates the following race between
sys_exit() and sys_futex_lock_pi():

 CPU0				CPU1

 sys_exit()			sys_futex()
  do_exit()			 futex_lock_pi()
   exit_signals(tsk)		  No waiters:
    tsk->flags |= PF_EXITING;	  *uaddr == 0x00000PID
  mm_release(tsk)		  Set waiter bit
   exit_robust_list(tsk) {	  *uaddr = 0x80000PID;
      Set owner died		  attach_to_pi_owner() {
    *uaddr = 0xC0000000;	   tsk = get_task(PID);
   }				   if (!tsk->flags & PF_EXITING) {
  ...				     attach();
  tsk->flags |= PF_EXITPIDONE;	   } else {
				     if (!(tsk->flags & PF_EXITPIDONE))
				       return -EAGAIN;
				     return -ESRCH; <--- FAIL
				   }

ESRCH is returned all the way to user space, which triggers the glibc test
case assert. Returning ESRCH unconditionally is wrong here because the user
space value has been changed by the exiting task to 0xC0000000, i.e. the
FUTEX_OWNER_DIED bit is set and the futex PID value has been cleared. This
is a valid state and the kernel has to handle it, i.e. taking the futex.

Cure it by rereading the user space value when PF_EXITING and PF_EXITPIDONE
is set in the task which 'owns' the futex. If the value has changed, let
the kernel retry the operation, which includes all regular sanity checks
and correctly handles the FUTEX_OWNER_DIED case.

If it hasn't changed, then return ESRCH as there is no way to distinguish
this case from malfunctioning user space. This happens when the exiting
task did not have a robust list, the robust list was corrupted or the user
space value in the futex was simply bogus.

Reported-by: Stefan Liebler <stli@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200467
Link: https://lkml.kernel.org/r/20181210152311.986181245@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/futex.c |   69 ++++++++++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 63 insertions(+), 6 deletions(-)

--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -1148,11 +1148,65 @@ out_error:
 	return ret;
 }
 
+static int handle_exit_race(u32 __user *uaddr, u32 uval,
+			    struct task_struct *tsk)
+{
+	u32 uval2;
+
+	/*
+	 * If PF_EXITPIDONE is not yet set, then try again.
+	 */
+	if (tsk && !(tsk->flags & PF_EXITPIDONE))
+		return -EAGAIN;
+
+	/*
+	 * Reread the user space value to handle the following situation:
+	 *
+	 * CPU0				CPU1
+	 *
+	 * sys_exit()			sys_futex()
+	 *  do_exit()			 futex_lock_pi()
+	 *                                futex_lock_pi_atomic()
+	 *   exit_signals(tsk)		    No waiters:
+	 *    tsk->flags |= PF_EXITING;	    *uaddr == 0x00000PID
+	 *  mm_release(tsk)		    Set waiter bit
+	 *   exit_robust_list(tsk) {	    *uaddr = 0x80000PID;
+	 *      Set owner died		    attach_to_pi_owner() {
+	 *    *uaddr = 0xC0000000;	     tsk = get_task(PID);
+	 *   }				     if (!tsk->flags & PF_EXITING) {
+	 *  ...				       attach();
+	 *  tsk->flags |= PF_EXITPIDONE;     } else {
+	 *				       if (!(tsk->flags & PF_EXITPIDONE))
+	 *				         return -EAGAIN;
+	 *				       return -ESRCH; <--- FAIL
+	 *				     }
+	 *
+	 * Returning ESRCH unconditionally is wrong here because the
+	 * user space value has been changed by the exiting task.
+	 *
+	 * The same logic applies to the case where the exiting task is
+	 * already gone.
+	 */
+	if (get_futex_value_locked(&uval2, uaddr))
+		return -EFAULT;
+
+	/* If the user space value has changed, try again. */
+	if (uval2 != uval)
+		return -EAGAIN;
+
+	/*
+	 * The exiting task did not have a robust list, the robust list was
+	 * corrupted or the user space value in *uaddr is simply bogus.
+	 * Give up and tell user space.
+	 */
+	return -ESRCH;
+}
+
 /*
  * Lookup the task for the TID provided from user space and attach to
  * it after doing proper sanity checks.
  */
-static int attach_to_pi_owner(u32 uval, union futex_key *key,
+static int attach_to_pi_owner(u32 __user *uaddr, u32 uval, union futex_key *key,
 			      struct futex_pi_state **ps)
 {
 	pid_t pid = uval & FUTEX_TID_MASK;
@@ -1162,12 +1216,15 @@ static int attach_to_pi_owner(u32 uval,
 	/*
 	 * We are the first waiter - try to look up the real owner and attach
 	 * the new pi_state to it, but bail out when TID = 0 [1]
+	 *
+	 * The !pid check is paranoid. None of the call sites should end up
+	 * with pid == 0, but better safe than sorry. Let the caller retry
 	 */
 	if (!pid)
-		return -ESRCH;
+		return -EAGAIN;
 	p = find_get_task_by_vpid(pid);
 	if (!p)
-		return -ESRCH;
+		return handle_exit_race(uaddr, uval, NULL);
 
 	if (unlikely(p->flags & PF_KTHREAD)) {
 		put_task_struct(p);
@@ -1187,7 +1244,7 @@ static int attach_to_pi_owner(u32 uval,
 		 * set, we know that the task has finished the
 		 * cleanup:
 		 */
-		int ret = (p->flags & PF_EXITPIDONE) ? -ESRCH : -EAGAIN;
+		int ret = handle_exit_race(uaddr, uval, p);
 
 		raw_spin_unlock_irq(&p->pi_lock);
 		put_task_struct(p);
@@ -1244,7 +1301,7 @@ static int lookup_pi_state(u32 __user *u
 	 * We are the first waiter - try to look up the owner based on
 	 * @uval and attach to it.
 	 */
-	return attach_to_pi_owner(uval, key, ps);
+	return attach_to_pi_owner(uaddr, uval, key, ps);
 }
 
 static int lock_pi_update_atomic(u32 __user *uaddr, u32 uval, u32 newval)
@@ -1352,7 +1409,7 @@ static int futex_lock_pi_atomic(u32 __us
 	 * attach to the owner. If that fails, no harm done, we only
 	 * set the FUTEX_WAITERS bit in the user space variable.
 	 */
-	return attach_to_pi_owner(uval, key, ps);
+	return attach_to_pi_owner(uaddr, newval, key, ps);
 }
 
 /**

[PATCH 4.19 26/46] x86/mtrr: Dont copy uninitialized gentry fields back to userspace

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Colin Ian King <colin.king@canonical.com>

commit 32043fa065b51e0b1433e48d118821c71b5cd65d upstream.

Currently the copy_to_user of data in the gentry struct is copying
uninitiaized data in field _pad from the stack to userspace.

Fix this by explicitly memset'ing gentry to zero, this also will zero any
compiler added padding fields that may be in struct (currently there are
none).

Detected by CoverityScan, CID#200783 ("Uninitialized scalar variable")

Fixes: b263b31e8ad6 ("x86, mtrr: Use explicit sizing and padding for the 64-bit ioctls")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Cc: security@kernel.org
Link: https://lkml.kernel.org/r/20181218172956.1440-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/cpu/mtrr/if.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/x86/kernel/cpu/mtrr/if.c
+++ b/arch/x86/kernel/cpu/mtrr/if.c
@@ -165,6 +165,8 @@ mtrr_ioctl(struct file *file, unsigned i
 	struct mtrr_gentry gentry;
 	void __user *arg = (void __user *) __arg;
 
+	memset(&gentry, 0, sizeof(gentry));
+
 	switch (cmd) {
 	case MTRRIOC_ADD_ENTRY:
 	case MTRRIOC_SET_ENTRY:

[PATCH 4.19 27/46] x86/mm: Fix decoy address handling vs 32-bit builds

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Williams <dan.j.williams@intel.com>

commit 51c3fbd89d7554caa3290837604309f8d8669d99 upstream.

A decoy address is used by set_mce_nospec() to update the cache attributes
for a page that may contain poison (multi-bit ECC error) while attempting
to minimize the possibility of triggering a speculative access to that
page.

When reserve_memtype() is handling a decoy address it needs to convert it
to its real physical alias. The conversion, AND'ing with __PHYSICAL_MASK,
is broken for a 32-bit physical mask and reserve_memtype() is passed the
last physical page. Gert reports triggering the:

    BUG_ON(start >= end);

...assertion when running a 32-bit non-PAE build on a platform that has
a driver resource at the top of physical memory:

    BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved

Given that the decoy address scheme is only targeted at 64-bit builds and
assumes that the top of physical address space is free for use as a decoy
address range, simply bypass address sanitization in the 32-bit case.

Lastly, there was no need to crash the system when this failure occurred,
and no need to crash future systems if the assumptions of decoy addresses
are ever violated. Change the BUG_ON() to a WARN() with an error return.

Fixes: 510ee090abc3 ("x86/mm/pat: Prepare {reserve, free}_memtype() for...")
Reported-by: Gert Robben <t2@gert.gr>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Gert Robben <t2@gert.gr>
Cc: stable@vger.kernel.org
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: platform-driver-x86@vger.kernel.org
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/154454337985.789277.12133288391664677775.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/mm/pat.c |   13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -519,8 +519,13 @@ static u64 sanitize_phys(u64 address)
 	 * for a "decoy" virtual address (bit 63 clear) passed to
 	 * set_memory_X(). __pa() on a "decoy" address results in a
 	 * physical address with bit 63 set.
+	 *
+	 * Decoy addresses are not present for 32-bit builds, see
+	 * set_mce_nospec().
 	 */
-	return address & __PHYSICAL_MASK;
+	if (IS_ENABLED(CONFIG_X86_64))
+		return address & __PHYSICAL_MASK;
+	return address;
 }
 
 /*
@@ -546,7 +551,11 @@ int reserve_memtype(u64 start, u64 end,
 
 	start = sanitize_phys(start);
 	end = sanitize_phys(end);
-	BUG_ON(start >= end); /* end is exclusive */
+	if (start >= end) {
+		WARN(1, "%s failed: [mem %#010Lx-%#010Lx], req %s\n", __func__,
+				start, end - 1, cattr_name(req_type));
+		return -EINVAL;
+	}
 
 	if (!pat_enabled()) {
 		/* This is identical to page table setting without PAT */

[PATCH 4.19 28/46] x86/vdso: Pass --eh-frame-hdr to the linker

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alistair Strachan <astrachan@google.com>

commit cd01544a268ad8ee5b1dfe42c4393f1095f86879 upstream.

Commit

  379d98ddf413 ("x86: vdso: Use $LD instead of $CC to link")

accidentally broke unwinding from userspace, because ld would strip the
.eh_frame sections when linking.

Originally, the compiler would implicitly add --eh-frame-hdr when
invoking the linker, but when this Makefile was converted from invoking
ld via the compiler, to invoking it directly (like vmlinux does),
the flag was missed. (The EH_FRAME section is important for the VDSO
shared libraries, but not for vmlinux.)

Fix the problem by explicitly specifying --eh-frame-hdr, which restores
parity with the old method.

See relevant bug reports for additional info:

  https://bugzilla.kernel.org/show_bug.cgi?id=201741
  https://bugzilla.redhat.com/show_bug.cgi?id=1659295

Fixes: 379d98ddf413 ("x86: vdso: Use $LD instead of $CC to link")
Reported-by: Florian Weimer <fweimer@redhat.com>
Reported-by: Carlos O'Donell <carlos@redhat.com>
Reported-by: "H. J. Lu" <hjl.tools@gmail.com>
Signed-off-by: Alistair Strachan <astrachan@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Carlos O'Donell <carlos@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: kernel-team@android.com
Cc: Laura Abbott <labbott@redhat.com>
Cc: stable <stable@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: X86 ML <x86@kernel.org>
Link: https://lkml.kernel.org/r/20181214223637.35954-1-astrachan@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/entry/vdso/Makefile |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/x86/entry/vdso/Makefile
+++ b/arch/x86/entry/vdso/Makefile
@@ -171,7 +171,8 @@ quiet_cmd_vdso = VDSO    $@
 		 sh $(srctree)/$(src)/checkundef.sh '$(NM)' '$@'
 
 VDSO_LDFLAGS = -shared $(call ld-option, --hash-style=both) \
-	$(call ld-option, --build-id) -Bsymbolic
+	$(call ld-option, --build-id) $(call ld-option, --eh-frame-hdr) \
+	-Bsymbolic
 GCOV_PROFILE := n
 
 #

[PATCH 4.19 29/46] x86/intel_rdt: Ensure a CPU remains online for the regions pseudo-locking sequence

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Reinette Chatre <reinette.chatre@intel.com>

commit 80b71c340f17705ec145911b9a193ea781811b16 upstream.

The user triggers the creation of a pseudo-locked region when writing
the requested schemata to the schemata resctrl file. The pseudo-locking
of a region is required to be done on a CPU that is associated with the
cache on which the pseudo-locked region will reside. In order to run the
locking code on a specific CPU, the needed CPU has to be selected and
ensured to remain online during the entire locking sequence.

At this time, the cpu_hotplug_lock is not taken during the pseudo-lock
region creation and it is thus possible for a CPU to be selected to run
the pseudo-locking code and then that CPU to go offline before the
thread is able to run on it.

Fix this by ensuring that the cpu_hotplug_lock is taken while the CPU on
which code has to run needs to be controlled. Since the cpu_hotplug_lock
is always taken before rdtgroup_mutex the lock order is maintained.

Fixes: e0bdfe8e36f3 ("x86/intel_rdt: Support creation/removal of pseudo-locked region")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: gavin.hindman@intel.com
Cc: jithu.joseph@intel.com
Cc: stable <stable@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/b7b17432a80f95a1fa21a1698ba643014f58ad31.1544476425.git.reinette.chatre@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/cpu/intel_rdt_ctrlmondata.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/arch/x86/kernel/cpu/intel_rdt_ctrlmondata.c
+++ b/arch/x86/kernel/cpu/intel_rdt_ctrlmondata.c
@@ -23,6 +23,7 @@
 
 #define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
 
+#include <linux/cpu.h>
 #include <linux/kernfs.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
@@ -310,9 +311,11 @@ ssize_t rdtgroup_schemata_write(struct k
 		return -EINVAL;
 	buf[nbytes - 1] = '\0';
 
+	cpus_read_lock();
 	rdtgrp = rdtgroup_kn_lock_live(of->kn);
 	if (!rdtgrp) {
 		rdtgroup_kn_unlock(of->kn);
+		cpus_read_unlock();
 		return -ENOENT;
 	}
 	rdt_last_cmd_clear();
@@ -367,6 +370,7 @@ ssize_t rdtgroup_schemata_write(struct k
 
 out:
 	rdtgroup_kn_unlock(of->kn);
+	cpus_read_unlock();
 	return ret ?: nbytes;
 }
 

[PATCH 4.19 30/46] panic: avoid deadlocks in re-entrant console drivers

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>

commit c7c3f05e341a9a2bd1a92993d4f996cfd6e7348e upstream.

>From printk()/serial console point of view panic() is special, because
it may force CPU to re-enter printk() or/and serial console driver.
Therefore, some of serial consoles drivers are re-entrant. E.g. 8250:

serial8250_console_write()
{
	if (port->sysrq)
		locked = 0;
	else if (oops_in_progress)
		locked = spin_trylock_irqsave(&port->lock, flags);
	else
		spin_lock_irqsave(&port->lock, flags);
	...
}

panic() does set oops_in_progress via bust_spinlocks(1), so in theory
we should be able to re-enter serial console driver from panic():

	CPU0
	<NMI>
	uart_console_write()
	serial8250_console_write()		// if (oops_in_progress)
						//    spin_trylock_irqsave()
	call_console_drivers()
	console_unlock()
	console_flush_on_panic()
	bust_spinlocks(1)			// oops_in_progress++
	panic()
	<NMI/>
	spin_lock_irqsave(&port->lock, flags)   // spin_lock_irqsave()
	serial8250_console_write()
	call_console_drivers()
	console_unlock()
	printk()
	...

However, this does not happen and we deadlock in serial console on
port->lock spinlock. And the problem is that console_flush_on_panic()
called after bust_spinlocks(0):

void panic(const char *fmt, ...)
{
	bust_spinlocks(1);
	...
	bust_spinlocks(0);
	console_flush_on_panic();
	...
}

bust_spinlocks(0) decrements oops_in_progress, so oops_in_progress
can go back to zero. Thus even re-entrant console drivers will simply
spin on port->lock spinlock. Given that port->lock may already be
locked either by a stopped CPU, or by the very same CPU we execute
panic() on (for instance, NMI panic() on printing CPU) the system
deadlocks and does not reboot.

Fix this by removing bust_spinlocks(0), so oops_in_progress is always
set in panic() now and, thus, re-entrant console drivers will trylock
the port->lock instead of spinning on it forever, when we call them
from console_flush_on_panic().

Link: http://lkml.kernel.org/r/20181025101036.6823-1-sergey.senozhatsky@gmail.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Daniel Wang <wonderfly@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: linux-serial@vger.kernel.org
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/panic.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -14,6 +14,7 @@
 #include <linux/kmsg_dump.h>
 #include <linux/kallsyms.h>
 #include <linux/notifier.h>
+#include <linux/vt_kern.h>
 #include <linux/module.h>
 #include <linux/random.h>
 #include <linux/ftrace.h>
@@ -233,7 +234,10 @@ void panic(const char *fmt, ...)
 	if (_crash_kexec_post_notifiers)
 		__crash_kexec(NULL);
 
-	bust_spinlocks(0);
+#ifdef CONFIG_VT
+	unblank_screen();
+#endif
+	console_unblank();
 
 	/*
 	 * We may have ended up stopping the CPU holding the lock (in

[PATCH 4.19 31/46] mm: add mm_pxd_folded checks to pgtable_bytes accounting functions

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 6d212db11947ae5464e4717536ed9faf61c01e86 ]

The common mm code calls mm_dec_nr_pmds() and mm_dec_nr_puds()
in free_pgtables() if the address range spans a full pud or pmd.
If mm_dec_nr_puds/mm_dec_nr_pmds are non-empty due to configuration
settings they blindly subtract the size of the pmd or pud table from
pgtable_bytes even if the pud or pmd page table layer is folded.

Add explicit mm_[pmd|pud]_folded checks to the four pgtable_bytes
accounting functions mm_inc_nr_puds, mm_inc_nr_pmds, mm_dec_nr_puds
and mm_dec_nr_pmds. As the check for folded page tables can be
overwritten by the architecture, this allows to keep a correct
pgtable_bytes value for platforms that use a dynamic number of
page table levels.

Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/mm.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/include/linux/mm.h b/include/linux/mm.h
index 0416a7204be3..e899460f1bc5 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1724,11 +1724,15 @@ int __pud_alloc(struct mm_struct *mm, p4d_t *p4d, unsigned long address);
 
 static inline void mm_inc_nr_puds(struct mm_struct *mm)
 {
+	if (mm_pud_folded(mm))
+		return;
 	atomic_long_add(PTRS_PER_PUD * sizeof(pud_t), &mm->pgtables_bytes);
 }
 
 static inline void mm_dec_nr_puds(struct mm_struct *mm)
 {
+	if (mm_pud_folded(mm))
+		return;
 	atomic_long_sub(PTRS_PER_PUD * sizeof(pud_t), &mm->pgtables_bytes);
 }
 #endif
@@ -1748,11 +1752,15 @@ int __pmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long address);
 
 static inline void mm_inc_nr_pmds(struct mm_struct *mm)
 {
+	if (mm_pmd_folded(mm))
+		return;
 	atomic_long_add(PTRS_PER_PMD * sizeof(pmd_t), &mm->pgtables_bytes);
 }
 
 static inline void mm_dec_nr_pmds(struct mm_struct *mm)
 {
+	if (mm_pmd_folded(mm))
+		return;
 	atomic_long_sub(PTRS_PER_PMD * sizeof(pmd_t), &mm->pgtables_bytes);
 }
 #endif
-- 
2.19.1

[PATCH 4.19 32/46] mm: make the __PAGETABLE_PxD_FOLDED defines non-empty

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit a8874e7e8a8896f2b6c641f4b8e2473eafd35204 ]

Change the currently empty defines for __PAGETABLE_PMD_FOLDED,
__PAGETABLE_PUD_FOLDED and __PAGETABLE_P4D_FOLDED to return 1.
This makes it possible to use __is_defined() to test if the
preprocessor define exists.

Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/include/asm/pgtable-2level.h    | 2 +-
 arch/m68k/include/asm/pgtable_mm.h       | 4 ++--
 arch/microblaze/include/asm/pgtable.h    | 2 +-
 arch/nds32/include/asm/pgtable.h         | 2 +-
 arch/parisc/include/asm/pgtable.h        | 2 +-
 include/asm-generic/4level-fixup.h       | 2 +-
 include/asm-generic/5level-fixup.h       | 2 +-
 include/asm-generic/pgtable-nop4d-hack.h | 2 +-
 include/asm-generic/pgtable-nop4d.h      | 2 +-
 include/asm-generic/pgtable-nopmd.h      | 2 +-
 include/asm-generic/pgtable-nopud.h      | 2 +-
 11 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
index 92fd2c8a9af0..12659ce5c1f3 100644
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@@ -10,7 +10,7 @@
 #ifndef _ASM_PGTABLE_2LEVEL_H
 #define _ASM_PGTABLE_2LEVEL_H
 
-#define __PAGETABLE_PMD_FOLDED
+#define __PAGETABLE_PMD_FOLDED 1
 
 /*
  * Hardware-wise, we have a two level page table structure, where the first
diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h
index 6181e4134483..fe3ddd73a0cc 100644
--- a/arch/m68k/include/asm/pgtable_mm.h
+++ b/arch/m68k/include/asm/pgtable_mm.h
@@ -55,12 +55,12 @@
  */
 #ifdef CONFIG_SUN3
 #define PTRS_PER_PTE   16
-#define __PAGETABLE_PMD_FOLDED
+#define __PAGETABLE_PMD_FOLDED 1
 #define PTRS_PER_PMD   1
 #define PTRS_PER_PGD   2048
 #elif defined(CONFIG_COLDFIRE)
 #define PTRS_PER_PTE	512
-#define __PAGETABLE_PMD_FOLDED
+#define __PAGETABLE_PMD_FOLDED 1
 #define PTRS_PER_PMD	1
 #define PTRS_PER_PGD	1024
 #else
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index 7b650ab14fa0..2ca598534cc7 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -63,7 +63,7 @@ extern int mem_init_done;
 
 #include <asm-generic/4level-fixup.h>
 
-#define __PAGETABLE_PMD_FOLDED
+#define __PAGETABLE_PMD_FOLDED 1
 
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
diff --git a/arch/nds32/include/asm/pgtable.h b/arch/nds32/include/asm/pgtable.h
index d3e19a55cf53..9f52db930c00 100644
--- a/arch/nds32/include/asm/pgtable.h
+++ b/arch/nds32/include/asm/pgtable.h
@@ -4,7 +4,7 @@
 #ifndef _ASMNDS32_PGTABLE_H
 #define _ASMNDS32_PGTABLE_H
 
-#define __PAGETABLE_PMD_FOLDED
+#define __PAGETABLE_PMD_FOLDED 1
 #include <asm-generic/4level-fixup.h>
 #include <asm-generic/sizes.h>
 
diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h
index fa6b7c78f18a..ff0860b2b21a 100644
--- a/arch/parisc/include/asm/pgtable.h
+++ b/arch/parisc/include/asm/pgtable.h
@@ -117,7 +117,7 @@ static inline void purge_tlb_entries(struct mm_struct *mm, unsigned long addr)
 #if CONFIG_PGTABLE_LEVELS == 3
 #define BITS_PER_PMD	(PAGE_SHIFT + PMD_ORDER - BITS_PER_PMD_ENTRY)
 #else
-#define __PAGETABLE_PMD_FOLDED
+#define __PAGETABLE_PMD_FOLDED 1
 #define BITS_PER_PMD	0
 #endif
 #define PTRS_PER_PMD    (1UL << BITS_PER_PMD)
diff --git a/include/asm-generic/4level-fixup.h b/include/asm-generic/4level-fixup.h
index 89f3b03b1445..e3667c9a33a5 100644
--- a/include/asm-generic/4level-fixup.h
+++ b/include/asm-generic/4level-fixup.h
@@ -3,7 +3,7 @@
 #define _4LEVEL_FIXUP_H
 
 #define __ARCH_HAS_4LEVEL_HACK
-#define __PAGETABLE_PUD_FOLDED
+#define __PAGETABLE_PUD_FOLDED 1
 
 #define PUD_SHIFT			PGDIR_SHIFT
 #define PUD_SIZE			PGDIR_SIZE
diff --git a/include/asm-generic/5level-fixup.h b/include/asm-generic/5level-fixup.h
index 9c2e0708eb82..73474bb52344 100644
--- a/include/asm-generic/5level-fixup.h
+++ b/include/asm-generic/5level-fixup.h
@@ -3,7 +3,7 @@
 #define _5LEVEL_FIXUP_H
 
 #define __ARCH_HAS_5LEVEL_HACK
-#define __PAGETABLE_P4D_FOLDED
+#define __PAGETABLE_P4D_FOLDED 1
 
 #define P4D_SHIFT			PGDIR_SHIFT
 #define P4D_SIZE			PGDIR_SIZE
diff --git a/include/asm-generic/pgtable-nop4d-hack.h b/include/asm-generic/pgtable-nop4d-hack.h
index 0c34215263b8..1d6dd38c0e5e 100644
--- a/include/asm-generic/pgtable-nop4d-hack.h
+++ b/include/asm-generic/pgtable-nop4d-hack.h
@@ -5,7 +5,7 @@
 #ifndef __ASSEMBLY__
 #include <asm-generic/5level-fixup.h>
 
-#define __PAGETABLE_PUD_FOLDED
+#define __PAGETABLE_PUD_FOLDED 1
 
 /*
  * Having the pud type consist of a pgd gets the size right, and allows
diff --git a/include/asm-generic/pgtable-nop4d.h b/include/asm-generic/pgtable-nop4d.h
index 1a29b2a0282b..04cb913797bc 100644
--- a/include/asm-generic/pgtable-nop4d.h
+++ b/include/asm-generic/pgtable-nop4d.h
@@ -4,7 +4,7 @@
 
 #ifndef __ASSEMBLY__
 
-#define __PAGETABLE_P4D_FOLDED
+#define __PAGETABLE_P4D_FOLDED 1
 
 typedef struct { pgd_t pgd; } p4d_t;
 
diff --git a/include/asm-generic/pgtable-nopmd.h b/include/asm-generic/pgtable-nopmd.h
index f35f6e8149e4..b85b8271a73d 100644
--- a/include/asm-generic/pgtable-nopmd.h
+++ b/include/asm-generic/pgtable-nopmd.h
@@ -8,7 +8,7 @@
 
 struct mm_struct;
 
-#define __PAGETABLE_PMD_FOLDED
+#define __PAGETABLE_PMD_FOLDED 1
 
 /*
  * Having the pmd type consist of a pud gets the size right, and allows
diff --git a/include/asm-generic/pgtable-nopud.h b/include/asm-generic/pgtable-nopud.h
index e950b9c50f34..9bef475db6fe 100644
--- a/include/asm-generic/pgtable-nopud.h
+++ b/include/asm-generic/pgtable-nopud.h
@@ -9,7 +9,7 @@
 #else
 #include <asm-generic/pgtable-nop4d.h>
 
-#define __PAGETABLE_PUD_FOLDED
+#define __PAGETABLE_PUD_FOLDED 1
 
 /*
  * Having the pud type consist of a p4d gets the size right, and allows
-- 
2.19.1

[PATCH 4.19 33/46] mm: introduce mm_[p4d|pud|pmd]_folded

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 1071fc5779d9846fec56a4ff6089ab08cac1ab72 ]

Add three architecture overrideable functions to test if the
p4d, pud, or pmd layer of a page table is folded or not.

Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/asm-generic/pgtable.h | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index 88ebc6102c7c..15fd0277ffa6 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -1127,4 +1127,20 @@ static inline bool arch_has_pfn_modify_check(void)
 #endif
 #endif
 
+/*
+ * On some architectures it depends on the mm if the p4d/pud or pmd
+ * layer of the page table hierarchy is folded or not.
+ */
+#ifndef mm_p4d_folded
+#define mm_p4d_folded(mm)	__is_defined(__PAGETABLE_P4D_FOLDED)
+#endif
+
+#ifndef mm_pud_folded
+#define mm_pud_folded(mm)	__is_defined(__PAGETABLE_PUD_FOLDED)
+#endif
+
+#ifndef mm_pmd_folded
+#define mm_pmd_folded(mm)	__is_defined(__PAGETABLE_PMD_FOLDED)
+#endif
+
 #endif /* _ASM_GENERIC_PGTABLE_H */
-- 
2.19.1

[PATCH 4.19 34/46] xfrm_user: fix freeing of xfrm states on acquire

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Krause <minipli@googlemail.com>

commit 4a135e538962cb00a9667c82e7d2b9e4d7cd7177 upstream.

Commit 565f0fa902b6 ("xfrm: use a dedicated slab cache for struct
xfrm_state") moved xfrm state objects to use their own slab cache.
However, it missed to adapt xfrm_user to use this new cache when
freeing xfrm states.

Fix this by introducing and make use of a new helper for freeing
xfrm_state objects.

Fixes: 565f0fa902b6 ("xfrm: use a dedicated slab cache for struct xfrm_state")
Reported-by: Pan Bian <bianpan2016@163.com>
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/net/xfrm.h    |    1 +
 net/xfrm/xfrm_state.c |    8 +++++++-
 net/xfrm/xfrm_user.c  |    4 ++--
 3 files changed, 10 insertions(+), 3 deletions(-)

--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -1552,6 +1552,7 @@ int xfrm_state_walk(struct net *net, str
 		    int (*func)(struct xfrm_state *, int, void*), void *);
 void xfrm_state_walk_done(struct xfrm_state_walk *walk, struct net *net);
 struct xfrm_state *xfrm_state_alloc(struct net *net);
+void xfrm_state_free(struct xfrm_state *x);
 struct xfrm_state *xfrm_state_find(const xfrm_address_t *daddr,
 				   const xfrm_address_t *saddr,
 				   const struct flowi *fl,
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -426,6 +426,12 @@ static void xfrm_put_mode(struct xfrm_mo
 	module_put(mode->owner);
 }
 
+void xfrm_state_free(struct xfrm_state *x)
+{
+	kmem_cache_free(xfrm_state_cache, x);
+}
+EXPORT_SYMBOL(xfrm_state_free);
+
 static void xfrm_state_gc_destroy(struct xfrm_state *x)
 {
 	tasklet_hrtimer_cancel(&x->mtimer);
@@ -452,7 +458,7 @@ static void xfrm_state_gc_destroy(struct
 	}
 	xfrm_dev_state_free(x);
 	security_xfrm_state_free(x);
-	kmem_cache_free(xfrm_state_cache, x);
+	xfrm_state_free(x);
 }
 
 static void xfrm_state_gc_task(struct work_struct *work)
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -2288,13 +2288,13 @@ static int xfrm_add_acquire(struct sk_bu
 
 	}
 
-	kfree(x);
+	xfrm_state_free(x);
 	kfree(xp);
 
 	return 0;
 
 free_state:
-	kfree(x);
+	xfrm_state_free(x);
 nomem:
 	return err;
 }

[PATCH 4.19 35/46] rtlwifi: Fix leak of skb when processing C2H_BT_INFO

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Larry Finger <Larry.Finger@lwfinger.net>

commit 8cfa272b0d321160ebb5b45073e39ef0a6ad73f2 upstream.

With commit 0a9f8f0a1ba9 ("rtlwifi: fix btmpinfo timeout while processing
C2H_BT_INFO"), calling rtl_c2hcmd_enqueue() with rtl_c2h_fast_cmd() true,
the routine returns without freeing that skb, thereby leaking it.

This issue has been discussed at https://github.com/lwfinger/rtlwifi_new/issues/401
and the fix tested there.

Fixes: 0a9f8f0a1ba9 ("rtlwifi: fix btmpinfo timeout while processing C2H_BT_INFO")
Reported-and-tested-by: Francisco Machado Magalhães Neto <franmagneto@gmail.com>
Cc: Francisco Machado Magalhães Neto <franmagneto@gmail.com>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Stable <stable@vger.kernel.org> # 4.18+
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/realtek/rtlwifi/base.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/wireless/realtek/rtlwifi/base.c
+++ b/drivers/net/wireless/realtek/rtlwifi/base.c
@@ -2289,6 +2289,7 @@ void rtl_c2hcmd_enqueue(struct ieee80211
 
 	if (rtl_c2h_fast_cmd(hw, skb)) {
 		rtl_c2h_content_parsing(hw, skb);
+		kfree_skb(skb);
 		return;
 	}
 

[PATCH 4.19 36/46] iwlwifi: mvm: dont send GEO_TX_POWER_LIMIT to old firmwares

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

commit eca1e56ceedd9cc185eb18baf307d3ff2e4af376 upstream.

Old firmware versions don't support this command. Sending it
to any firmware before -41.ucode will crash the firmware.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201975

Fixes: 66e839030fd6 ("iwlwifi: fix wrong WGDS_WIFI_DATA_SIZE")
CC: <stable@vger.kernel.org> #4.19+
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/intel/iwlwifi/mvm/fw.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw.c
@@ -868,6 +868,15 @@ static int iwl_mvm_sar_geo_init(struct i
 	int ret, i, j;
 	u16 cmd_wide_id =  WIDE_ID(PHY_OPS_GROUP, GEO_TX_POWER_LIMIT);
 
+	/*
+	 * This command is not supported on earlier firmware versions.
+	 * Unfortunately, we don't have a TLV API flag to rely on, so
+	 * rely on the major version which is in the first byte of
+	 * ucode_ver.
+	 */
+	if (IWL_UCODE_SERIAL(mvm->fw->ucode_ver) < 41)
+		return 0;
+
 	ret = iwl_mvm_sar_get_wgds_table(mvm);
 	if (ret < 0) {
 		IWL_DEBUG_RADIO(mvm,

[PATCH 4.19 37/46] Revert "mwifiex: restructure rx_reorder_tbl_lock usage"

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brian Norris <briannorris@chromium.org>

commit 1aa48f088615ebfa5e139951a0d3e7dc2c2af4ec upstream.

This reverts commit 5188d5453bc9380ccd4ae1086138dd485d13aef2, because it
introduced lock recursion:

  BUG: spinlock recursion on CPU#2, kworker/u13:1/395
   lock: 0xffffffc0e28a47f0, .magic: dead4ead, .owner: kworker/u13:1/395, .owner_cpu: 2
  CPU: 2 PID: 395 Comm: kworker/u13:1 Not tainted 4.20.0-rc4+ #2
  Hardware name: Google Kevin (DT)
  Workqueue: MWIFIEX_RX_WORK_QUEUE mwifiex_rx_work_queue [mwifiex]
  Call trace:
   dump_backtrace+0x0/0x140
   show_stack+0x20/0x28
   dump_stack+0x84/0xa4
   spin_bug+0x98/0xa4
   do_raw_spin_lock+0x5c/0xdc
   _raw_spin_lock_irqsave+0x38/0x48
   mwifiex_flush_data+0x2c/0xa4 [mwifiex]
   call_timer_fn+0xcc/0x1c4
   run_timer_softirq+0x264/0x4f0
   __do_softirq+0x1a8/0x35c
   do_softirq+0x54/0x64
   netif_rx_ni+0xe8/0x120
   mwifiex_recv_packet+0xfc/0x10c [mwifiex]
   mwifiex_process_rx_packet+0x1d4/0x238 [mwifiex]
   mwifiex_11n_dispatch_pkt+0x190/0x1ac [mwifiex]
   mwifiex_11n_rx_reorder_pkt+0x28c/0x354 [mwifiex]
   mwifiex_process_sta_rx_packet+0x204/0x26c [mwifiex]
   mwifiex_handle_rx_packet+0x15c/0x16c [mwifiex]
   mwifiex_rx_work_queue+0x104/0x134 [mwifiex]
   worker_thread+0x4cc/0x72c
   kthread+0x134/0x13c
   ret_from_fork+0x10/0x18

This was clearly not tested well at all. I simply performed 'wget' in a
loop and it fell over within a few seconds.

Fixes: 5188d5453bc9 ("mwifiex: restructure rx_reorder_tbl_lock usage")
Cc: <stable@vger.kernel.org>
Cc: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/marvell/mwifiex/11n.c           |    5 
 drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c |   96 +++++++++----------
 drivers/net/wireless/marvell/mwifiex/uap_txrx.c      |    3 
 3 files changed, 51 insertions(+), 53 deletions(-)

--- a/drivers/net/wireless/marvell/mwifiex/11n.c
+++ b/drivers/net/wireless/marvell/mwifiex/11n.c
@@ -696,11 +696,10 @@ void mwifiex_11n_delba(struct mwifiex_pr
 				"Send delba to tid=%d, %pM\n",
 				tid, rx_reor_tbl_ptr->ta);
 			mwifiex_send_delba(priv, tid, rx_reor_tbl_ptr->ta, 0);
-			spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock,
-					       flags);
-			return;
+			goto exit;
 		}
 	}
+exit:
 	spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
 }
 
--- a/drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c
+++ b/drivers/net/wireless/marvell/mwifiex/11n_rxreorder.c
@@ -103,8 +103,6 @@ static int mwifiex_11n_dispatch_pkt(stru
  * There could be holes in the buffer, which are skipped by the function.
  * Since the buffer is linear, the function uses rotation to simulate
  * circular buffer.
- *
- * The caller must hold rx_reorder_tbl_lock spinlock.
  */
 static void
 mwifiex_11n_dispatch_pkt_until_start_win(struct mwifiex_private *priv,
@@ -113,21 +111,25 @@ mwifiex_11n_dispatch_pkt_until_start_win
 {
 	int pkt_to_send, i;
 	void *rx_tmp_ptr;
+	unsigned long flags;
 
 	pkt_to_send = (start_win > tbl->start_win) ?
 		      min((start_win - tbl->start_win), tbl->win_size) :
 		      tbl->win_size;
 
 	for (i = 0; i < pkt_to_send; ++i) {
+		spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
 		rx_tmp_ptr = NULL;
 		if (tbl->rx_reorder_ptr[i]) {
 			rx_tmp_ptr = tbl->rx_reorder_ptr[i];
 			tbl->rx_reorder_ptr[i] = NULL;
 		}
+		spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
 		if (rx_tmp_ptr)
 			mwifiex_11n_dispatch_pkt(priv, rx_tmp_ptr);
 	}
 
+	spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
 	/*
 	 * We don't have a circular buffer, hence use rotation to simulate
 	 * circular buffer
@@ -138,6 +140,7 @@ mwifiex_11n_dispatch_pkt_until_start_win
 	}
 
 	tbl->start_win = start_win;
+	spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
 }
 
 /*
@@ -147,8 +150,6 @@ mwifiex_11n_dispatch_pkt_until_start_win
  * The start window is adjusted automatically when a hole is located.
  * Since the buffer is linear, the function uses rotation to simulate
  * circular buffer.
- *
- * The caller must hold rx_reorder_tbl_lock spinlock.
  */
 static void
 mwifiex_11n_scan_and_dispatch(struct mwifiex_private *priv,
@@ -156,15 +157,22 @@ mwifiex_11n_scan_and_dispatch(struct mwi
 {
 	int i, j, xchg;
 	void *rx_tmp_ptr;
+	unsigned long flags;
 
 	for (i = 0; i < tbl->win_size; ++i) {
-		if (!tbl->rx_reorder_ptr[i])
+		spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
+		if (!tbl->rx_reorder_ptr[i]) {
+			spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock,
+					       flags);
 			break;
+		}
 		rx_tmp_ptr = tbl->rx_reorder_ptr[i];
 		tbl->rx_reorder_ptr[i] = NULL;
+		spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
 		mwifiex_11n_dispatch_pkt(priv, rx_tmp_ptr);
 	}
 
+	spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
 	/*
 	 * We don't have a circular buffer, hence use rotation to simulate
 	 * circular buffer
@@ -177,6 +185,7 @@ mwifiex_11n_scan_and_dispatch(struct mwi
 		}
 	}
 	tbl->start_win = (tbl->start_win + i) & (MAX_TID_VALUE - 1);
+	spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
 }
 
 /*
@@ -184,8 +193,6 @@ mwifiex_11n_scan_and_dispatch(struct mwi
  *
  * The function stops the associated timer and dispatches all the
  * pending packets in the Rx reorder table before deletion.
- *
- * The caller must hold rx_reorder_tbl_lock spinlock.
  */
 static void
 mwifiex_del_rx_reorder_entry(struct mwifiex_private *priv,
@@ -211,7 +218,11 @@ mwifiex_del_rx_reorder_entry(struct mwif
 
 	del_timer_sync(&tbl->timer_context.timer);
 	tbl->timer_context.timer_is_set = false;
+
+	spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
 	list_del(&tbl->list);
+	spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
+
 	kfree(tbl->rx_reorder_ptr);
 	kfree(tbl);
 
@@ -224,17 +235,22 @@ mwifiex_del_rx_reorder_entry(struct mwif
 /*
  * This function returns the pointer to an entry in Rx reordering
  * table which matches the given TA/TID pair.
- *
- * The caller must hold rx_reorder_tbl_lock spinlock.
  */
 struct mwifiex_rx_reorder_tbl *
 mwifiex_11n_get_rx_reorder_tbl(struct mwifiex_private *priv, int tid, u8 *ta)
 {
 	struct mwifiex_rx_reorder_tbl *tbl;
+	unsigned long flags;
 
-	list_for_each_entry(tbl, &priv->rx_reorder_tbl_ptr, list)
-		if (!memcmp(tbl->ta, ta, ETH_ALEN) && tbl->tid == tid)
+	spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
+	list_for_each_entry(tbl, &priv->rx_reorder_tbl_ptr, list) {
+		if (!memcmp(tbl->ta, ta, ETH_ALEN) && tbl->tid == tid) {
+			spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock,
+					       flags);
 			return tbl;
+		}
+	}
+	spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
 
 	return NULL;
 }
@@ -251,9 +267,14 @@ void mwifiex_11n_del_rx_reorder_tbl_by_t
 		return;
 
 	spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
-	list_for_each_entry_safe(tbl, tmp, &priv->rx_reorder_tbl_ptr, list)
-		if (!memcmp(tbl->ta, ta, ETH_ALEN))
+	list_for_each_entry_safe(tbl, tmp, &priv->rx_reorder_tbl_ptr, list) {
+		if (!memcmp(tbl->ta, ta, ETH_ALEN)) {
+			spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock,
+					       flags);
 			mwifiex_del_rx_reorder_entry(priv, tbl);
+			spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
+		}
+	}
 	spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
 
 	return;
@@ -262,18 +283,24 @@ void mwifiex_11n_del_rx_reorder_tbl_by_t
 /*
  * This function finds the last sequence number used in the packets
  * buffered in Rx reordering table.
- *
- * The caller must hold rx_reorder_tbl_lock spinlock.
  */
 static int
 mwifiex_11n_find_last_seq_num(struct reorder_tmr_cnxt *ctx)
 {
 	struct mwifiex_rx_reorder_tbl *rx_reorder_tbl_ptr = ctx->ptr;
+	struct mwifiex_private *priv = ctx->priv;
+	unsigned long flags;
 	int i;
 
-	for (i = rx_reorder_tbl_ptr->win_size - 1; i >= 0; --i)
-		if (rx_reorder_tbl_ptr->rx_reorder_ptr[i])
+	spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
+	for (i = rx_reorder_tbl_ptr->win_size - 1; i >= 0; --i) {
+		if (rx_reorder_tbl_ptr->rx_reorder_ptr[i]) {
+			spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock,
+					       flags);
 			return i;
+		}
+	}
+	spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
 
 	return -1;
 }
@@ -291,22 +318,17 @@ mwifiex_flush_data(struct timer_list *t)
 	struct reorder_tmr_cnxt *ctx =
 		from_timer(ctx, t, timer);
 	int start_win, seq_num;
-	unsigned long flags;
 
 	ctx->timer_is_set = false;
-	spin_lock_irqsave(&ctx->priv->rx_reorder_tbl_lock, flags);
 	seq_num = mwifiex_11n_find_last_seq_num(ctx);
 
-	if (seq_num < 0) {
-		spin_unlock_irqrestore(&ctx->priv->rx_reorder_tbl_lock, flags);
+	if (seq_num < 0)
 		return;
-	}
 
 	mwifiex_dbg(ctx->priv->adapter, INFO, "info: flush data %d\n", seq_num);
 	start_win = (ctx->ptr->start_win + seq_num + 1) & (MAX_TID_VALUE - 1);
 	mwifiex_11n_dispatch_pkt_until_start_win(ctx->priv, ctx->ptr,
 						 start_win);
-	spin_unlock_irqrestore(&ctx->priv->rx_reorder_tbl_lock, flags);
 }
 
 /*
@@ -333,14 +355,11 @@ mwifiex_11n_create_rx_reorder_tbl(struct
 	 * If we get a TID, ta pair which is already present dispatch all the
 	 * the packets and move the window size until the ssn
 	 */
-	spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
 	tbl = mwifiex_11n_get_rx_reorder_tbl(priv, tid, ta);
 	if (tbl) {
 		mwifiex_11n_dispatch_pkt_until_start_win(priv, tbl, seq_num);
-		spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
 		return;
 	}
-	spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
 	/* if !tbl then create one */
 	new_node = kzalloc(sizeof(struct mwifiex_rx_reorder_tbl), GFP_KERNEL);
 	if (!new_node)
@@ -551,20 +570,16 @@ int mwifiex_11n_rx_reorder_pkt(struct mw
 	int prev_start_win, start_win, end_win, win_size;
 	u16 pkt_index;
 	bool init_window_shift = false;
-	unsigned long flags;
 	int ret = 0;
 
-	spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
 	tbl = mwifiex_11n_get_rx_reorder_tbl(priv, tid, ta);
 	if (!tbl) {
-		spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
 		if (pkt_type != PKT_TYPE_BAR)
 			mwifiex_11n_dispatch_pkt(priv, payload);
 		return ret;
 	}
 
 	if ((pkt_type == PKT_TYPE_AMSDU) && !tbl->amsdu) {
-		spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
 		mwifiex_11n_dispatch_pkt(priv, payload);
 		return ret;
 	}
@@ -651,8 +666,6 @@ done:
 	if (!tbl->timer_context.timer_is_set ||
 	    prev_start_win != tbl->start_win)
 		mwifiex_11n_rxreorder_timer_restart(tbl);
-
-	spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
 	return ret;
 }
 
@@ -681,18 +694,14 @@ mwifiex_del_ba_tbl(struct mwifiex_privat
 		    peer_mac, tid, initiator);
 
 	if (cleanup_rx_reorder_tbl) {
-		spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
 		tbl = mwifiex_11n_get_rx_reorder_tbl(priv, tid,
 								 peer_mac);
 		if (!tbl) {
-			spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock,
-					       flags);
 			mwifiex_dbg(priv->adapter, EVENT,
 				    "event: TID, TA not found in table\n");
 			return;
 		}
 		mwifiex_del_rx_reorder_entry(priv, tbl);
-		spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
 	} else {
 		ptx_tbl = mwifiex_get_ba_tbl(priv, tid, peer_mac);
 		if (!ptx_tbl) {
@@ -726,7 +735,6 @@ int mwifiex_ret_11n_addba_resp(struct mw
 	int tid, win_size;
 	struct mwifiex_rx_reorder_tbl *tbl;
 	uint16_t block_ack_param_set;
-	unsigned long flags;
 
 	block_ack_param_set = le16_to_cpu(add_ba_rsp->block_ack_param_set);
 
@@ -740,20 +748,17 @@ int mwifiex_ret_11n_addba_resp(struct mw
 		mwifiex_dbg(priv->adapter, ERROR, "ADDBA RSP: failed %pM tid=%d)\n",
 			    add_ba_rsp->peer_mac_addr, tid);
 
-		spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
 		tbl = mwifiex_11n_get_rx_reorder_tbl(priv, tid,
 						     add_ba_rsp->peer_mac_addr);
 		if (tbl)
 			mwifiex_del_rx_reorder_entry(priv, tbl);
 
-		spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
 		return 0;
 	}
 
 	win_size = (block_ack_param_set & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK)
 		    >> BLOCKACKPARAM_WINSIZE_POS;
 
-	spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
 	tbl = mwifiex_11n_get_rx_reorder_tbl(priv, tid,
 					     add_ba_rsp->peer_mac_addr);
 	if (tbl) {
@@ -764,7 +769,6 @@ int mwifiex_ret_11n_addba_resp(struct mw
 		else
 			tbl->amsdu = false;
 	}
-	spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
 
 	mwifiex_dbg(priv->adapter, CMD,
 		    "cmd: ADDBA RSP: %pM tid=%d ssn=%d win_size=%d\n",
@@ -804,8 +808,11 @@ void mwifiex_11n_cleanup_reorder_tbl(str
 
 	spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
 	list_for_each_entry_safe(del_tbl_ptr, tmp_node,
-				 &priv->rx_reorder_tbl_ptr, list)
+				 &priv->rx_reorder_tbl_ptr, list) {
+		spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
 		mwifiex_del_rx_reorder_entry(priv, del_tbl_ptr);
+		spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
+	}
 	INIT_LIST_HEAD(&priv->rx_reorder_tbl_ptr);
 	spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
 
@@ -929,7 +936,6 @@ void mwifiex_11n_rxba_sync_event(struct
 	int tlv_buf_left = len;
 	int ret;
 	u8 *tmp;
-	unsigned long flags;
 
 	mwifiex_dbg_dump(priv->adapter, EVT_D, "RXBA_SYNC event:",
 			 event_buf, len);
@@ -949,18 +955,14 @@ void mwifiex_11n_rxba_sync_event(struct
 			    tlv_rxba->mac, tlv_rxba->tid, tlv_seq_num,
 			    tlv_bitmap_len);
 
-		spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
 		rx_reor_tbl_ptr =
 			mwifiex_11n_get_rx_reorder_tbl(priv, tlv_rxba->tid,
 						       tlv_rxba->mac);
 		if (!rx_reor_tbl_ptr) {
-			spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock,
-					       flags);
 			mwifiex_dbg(priv->adapter, ERROR,
 				    "Can not find rx_reorder_tbl!");
 			return;
 		}
-		spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
 
 		for (i = 0; i < tlv_bitmap_len; i++) {
 			for (j = 0 ; j < 8; j++) {
--- a/drivers/net/wireless/marvell/mwifiex/uap_txrx.c
+++ b/drivers/net/wireless/marvell/mwifiex/uap_txrx.c
@@ -421,15 +421,12 @@ int mwifiex_process_uap_rx_packet(struct
 		spin_unlock_irqrestore(&priv->sta_list_spinlock, flags);
 	}
 
-	spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
 	if (!priv->ap_11n_enabled ||
 	    (!mwifiex_11n_get_rx_reorder_tbl(priv, uap_rx_pd->priority, ta) &&
 	    (le16_to_cpu(uap_rx_pd->rx_pkt_type) != PKT_TYPE_AMSDU))) {
 		ret = mwifiex_handle_uap_rx_forward(priv, skb);
-		spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
 		return ret;
 	}
-	spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
 
 	/* Reorder and send to kernel */
 	pkt_type = (u8)le16_to_cpu(uap_rx_pd->rx_pkt_type);

[PATCH 4.19 38/46] iwlwifi: add new cards for 9560, 9462, 9461 and killer series

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ihab Zhaika <ihab.zhaika@intel.com>

commit f108703cb5f199d0fc98517ac29a997c4c646c94 upstream.

add few PCI ID'S for 9560, 9462, 9461 and killer series.

Cc: stable@vger.kernel.org
Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/intel/iwlwifi/pcie/drv.c |   50 ++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

--- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
@@ -518,6 +518,56 @@ static const struct pci_device_id iwl_hw
 	{IWL_PCI_DEVICE(0x24FD, 0x9074, iwl8265_2ac_cfg)},
 
 /* 9000 Series */
+	{IWL_PCI_DEVICE(0x02F0, 0x0030, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x0034, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x0038, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x003C, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x0060, iwl9461_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x0064, iwl9461_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x00A0, iwl9462_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x00A4, iwl9462_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x0230, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x0234, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x0238, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x023C, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x0260, iwl9461_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x0264, iwl9461_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x02A0, iwl9462_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x02A4, iwl9462_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x1551, iwl9560_killer_s_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x1552, iwl9560_killer_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x2030, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x2034, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x4030, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x4034, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x40A4, iwl9462_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x4234, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x02F0, 0x42A4, iwl9462_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x0030, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x0034, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x0038, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x003C, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x0060, iwl9461_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x0064, iwl9461_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x00A0, iwl9462_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x00A4, iwl9462_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x0230, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x0234, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x0238, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x023C, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x0260, iwl9461_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x0264, iwl9461_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x02A0, iwl9462_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x02A4, iwl9462_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x1551, iwl9560_killer_s_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x1552, iwl9560_killer_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x2030, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x2034, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x4030, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x4034, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x40A4, iwl9462_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x4234, iwl9560_2ac_cfg_soc)},
+	{IWL_PCI_DEVICE(0x06F0, 0x42A4, iwl9462_2ac_cfg_soc)},
 	{IWL_PCI_DEVICE(0x2526, 0x0010, iwl9260_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x2526, 0x0014, iwl9260_2ac_cfg)},
 	{IWL_PCI_DEVICE(0x2526, 0x0018, iwl9260_2ac_cfg)},

[PATCH 4.19 39/46] media: ov5640: Fix set format regression

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jacopo Mondi <jacopo+renesas@jmondi.org>

commit 07115449919383548d094ff83cc27bd08639a8a1 upstream.

The set_fmt operations updates the sensor format only when the image format
is changed. When only the image sizes gets changed, the format do not get
updated causing the sensor to always report the one that was previously in
use.

Without this patch, updating frame size only fails:
  [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:srgb xfer:srgb ...]

With this patch applied:
  [fmt:UYVY8_2X8/1024x768@1/30 field:none colorspace:srgb xfer:srgb ...]

Fixes: 6949d864776e ("media: ov5640: do not change mode if format or frame interval is unchanged")

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Adam Ford <aford173@gmail.com> #imx6 w/ CSI2 interface on 4.19.6 and 4.20-RC5
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/i2c/ov5640.c |   17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -2020,6 +2020,7 @@ static int ov5640_set_fmt(struct v4l2_su
 	struct ov5640_dev *sensor = to_ov5640_dev(sd);
 	const struct ov5640_mode_info *new_mode;
 	struct v4l2_mbus_framefmt *mbus_fmt = &format->format;
+	struct v4l2_mbus_framefmt *fmt;
 	int ret;
 
 	if (format->pad != 0)
@@ -2037,22 +2038,20 @@ static int ov5640_set_fmt(struct v4l2_su
 	if (ret)
 		goto out;
 
-	if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
-		struct v4l2_mbus_framefmt *fmt =
-			v4l2_subdev_get_try_format(sd, cfg, 0);
+	if (format->which == V4L2_SUBDEV_FORMAT_TRY)
+		fmt = v4l2_subdev_get_try_format(sd, cfg, 0);
+	else
+		fmt = &sensor->fmt;
 
-		*fmt = *mbus_fmt;
-		goto out;
-	}
+	*fmt = *mbus_fmt;
 
 	if (new_mode != sensor->current_mode) {
 		sensor->current_mode = new_mode;
 		sensor->pending_mode_change = true;
 	}
-	if (mbus_fmt->code != sensor->fmt.code) {
-		sensor->fmt = *mbus_fmt;
+	if (mbus_fmt->code != sensor->fmt.code)
 		sensor->pending_fmt_change = true;
-	}
+
 out:
 	mutex_unlock(&sensor->lock);
 	return ret;

[PATCH 4.19 40/46] mm, memory_hotplug: initialize struct pages for the full memory section

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikhail Zaslonko <zaslonko@linux.ibm.com>

commit 2830bf6f05fb3e05bc4743274b806c821807a684 upstream.

If memory end is not aligned with the sparse memory section boundary,
the mapping of such a section is only partly initialized.  This may lead
to VM_BUG_ON due to uninitialized struct page access from
is_mem_section_removable() or test_pages_in_a_zone() function triggered
by memory_hotplug sysfs handlers:

Here are the the panic examples:
 CONFIG_DEBUG_VM=y
 CONFIG_DEBUG_VM_PGFLAGS=y

 kernel parameter mem=2050M
 --------------------------
 page:000003d082008000 is uninitialized and poisoned
 page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
 Call Trace:
 ( test_pages_in_a_zone+0xde/0x160)
   show_valid_zones+0x5c/0x190
   dev_attr_show+0x34/0x70
   sysfs_kf_seq_show+0xc8/0x148
   seq_read+0x204/0x480
   __vfs_read+0x32/0x178
   vfs_read+0x82/0x138
   ksys_read+0x5a/0xb0
   system_call+0xdc/0x2d8
 Last Breaking-Event-Address:
   test_pages_in_a_zone+0xde/0x160
 Kernel panic - not syncing: Fatal exception: panic_on_oops

 kernel parameter mem=3075M
 --------------------------
 page:000003d08300c000 is uninitialized and poisoned
 page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
 Call Trace:
 ( is_mem_section_removable+0xb4/0x190)
   show_mem_removable+0x9a/0xd8
   dev_attr_show+0x34/0x70
   sysfs_kf_seq_show+0xc8/0x148
   seq_read+0x204/0x480
   __vfs_read+0x32/0x178
   vfs_read+0x82/0x138
   ksys_read+0x5a/0xb0
   system_call+0xdc/0x2d8
 Last Breaking-Event-Address:
   is_mem_section_removable+0xb4/0x190
 Kernel panic - not syncing: Fatal exception: panic_on_oops

Fix the problem by initializing the last memory section of each zone in
memmap_init_zone() till the very end, even if it goes beyond the zone end.

Michal said:

: This has alwways been problem AFAIU.  It just went unnoticed because we
: have zeroed memmaps during allocation before f7f99100d8d9 ("mm: stop
: zeroing memory during allocation in vmemmap") and so the above test
: would simply skip these ranges as belonging to zone 0 or provided a
: garbage.
:
: So I guess we do care for post f7f99100d8d9 kernels mostly and
: therefore Fixes: f7f99100d8d9 ("mm: stop zeroing memory during
: allocation in vmemmap")

Link: http://lkml.kernel.org/r/20181212172712.34019-2-zaslonko@linux.ibm.com
Fixes: f7f99100d8d9 ("mm: stop zeroing memory during allocation in vmemmap")
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Suggested-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Pasha Tatashin <Pavel.Tatashin@microsoft.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/page_alloc.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -5538,6 +5538,18 @@ not_early:
 			cond_resched();
 		}
 	}
+#ifdef CONFIG_SPARSEMEM
+	/*
+	 * If the zone does not span the rest of the section then
+	 * we should at least initialize those pages. Otherwise we
+	 * could blow up on a poisoned page in some paths which depend
+	 * on full sections being initialized (e.g. memory hotplug).
+	 */
+	while (end_pfn % PAGES_PER_SECTION) {
+		__init_single_page(pfn_to_page(end_pfn), end_pfn, zone, nid);
+		end_pfn++;
+	}
+#endif
 }
 
 static void __meminit zone_init_free_lists(struct zone *zone)

[PATCH 4.19 41/46] mm: thp: fix flags for pmd migration when split

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Xu <peterx@redhat.com>

commit 2e83ee1d8694a61d0d95a5b694f2e61e8dde8627 upstream.

When splitting a huge migrating PMD, we'll transfer all the existing PMD
bits and apply them again onto the small PTEs.  However we are fetching
the bits unconditionally via pmd_soft_dirty(), pmd_write() or
pmd_yound() while actually they don't make sense at all when it's a
migration entry.  Fix them up.  Since at it, drop the ifdef together as
not needed.

Note that if my understanding is correct about the problem then if
without the patch there is chance to lose some of the dirty bits in the
migrating pmd pages (on x86_64 we're fetching bit 11 which is part of
swap offset instead of bit 2) and it could potentially corrupt the
memory of an userspace program which depends on the dirty bit.

Link: http://lkml.kernel.org/r/20181213051510.20306-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: <stable@vger.kernel.org>	[4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/huge_memory.c |   20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2127,23 +2127,25 @@ static void __split_huge_pmd_locked(stru
 	 */
 	old_pmd = pmdp_invalidate(vma, haddr, pmd);
 
-#ifdef CONFIG_ARCH_ENABLE_THP_MIGRATION
 	pmd_migration = is_pmd_migration_entry(old_pmd);
-	if (pmd_migration) {
+	if (unlikely(pmd_migration)) {
 		swp_entry_t entry;
 
 		entry = pmd_to_swp_entry(old_pmd);
 		page = pfn_to_page(swp_offset(entry));
-	} else
-#endif
+		write = is_write_migration_entry(entry);
+		young = false;
+		soft_dirty = pmd_swp_soft_dirty(old_pmd);
+	} else {
 		page = pmd_page(old_pmd);
+		if (pmd_dirty(old_pmd))
+			SetPageDirty(page);
+		write = pmd_write(old_pmd);
+		young = pmd_young(old_pmd);
+		soft_dirty = pmd_soft_dirty(old_pmd);
+	}
 	VM_BUG_ON_PAGE(!page_count(page), page);
 	page_ref_add(page, HPAGE_PMD_NR - 1);
-	if (pmd_dirty(old_pmd))
-		SetPageDirty(page);
-	write = pmd_write(old_pmd);
-	young = pmd_young(old_pmd);
-	soft_dirty = pmd_soft_dirty(old_pmd);
 
 	/*
 	 * Withdraw the table only after we mark the pmd entry invalid.

[PATCH 4.19 42/46] mm, page_alloc: fix has_unmovable_pages for HugePages

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oscar Salvador <osalvador@suse.de>

commit 17e2e7d7e1b83fa324b3f099bfe426659aa3c2a4 upstream.

While playing with gigantic hugepages and memory_hotplug, I triggered
the following #PF when "cat memoryX/removable":

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  #PF error: [normal kernel read fault]
  PGD 0 P4D 0
  Oops: 0000 [#1] SMP PTI
  CPU: 1 PID: 1481 Comm: cat Tainted: G            E     4.20.0-rc6-mm1-1-default+ #18
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
  RIP: 0010:has_unmovable_pages+0x154/0x210
  Call Trace:
   is_mem_section_removable+0x7d/0x100
   removable_show+0x90/0xb0
   dev_attr_show+0x1c/0x50
   sysfs_kf_seq_show+0xca/0x1b0
   seq_read+0x133/0x380
   __vfs_read+0x26/0x180
   vfs_read+0x89/0x140
   ksys_read+0x42/0x90
   do_syscall_64+0x5b/0x180
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

The reason is we do not pass the Head to page_hstate(), and so, the call
to compound_order() in page_hstate() returns 0, so we end up checking
all hstates's size to match PAGE_SIZE.

Obviously, we do not find any hstate matching that size, and we return
NULL.  Then, we dereference that NULL pointer in
hugepage_migration_supported() and we got the #PF from above.

Fix that by getting the head page before calling page_hstate().

Also, since gigantic pages span several pageblocks, re-adjust the logic
for skipping pages.  While are it, we can also get rid of the
round_up().

[osalvador@suse.de: remove round_up(), adjust skip pages logic per Michal]
  Link: http://lkml.kernel.org/r/20181221062809.31771-1-osalvador@suse.de
Link: http://lkml.kernel.org/r/20181217225113.17864-1-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/page_alloc.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -7716,11 +7716,14 @@ bool has_unmovable_pages(struct zone *zo
 		 * handle each tail page individually in migration.
 		 */
 		if (PageHuge(page)) {
+			struct page *head = compound_head(page);
+			unsigned int skip_pages;
 
-			if (!hugepage_migration_supported(page_hstate(page)))
+			if (!hugepage_migration_supported(page_hstate(head)))
 				goto unmovable;
 
-			iter = round_up(iter + 1, 1<<compound_order(page)) - 1;
+			skip_pages = (1 << compound_order(head)) - (page - head);
+			iter += skip_pages - 1;
 			continue;
 		}
 

[PATCH 4.19 43/46] mm: dont miss the last page because of round-off error

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roman Gushchin <guro@fb.com>

commit 68600f623d69da428c6163275f97ca126e1a8ec5 upstream.

I've noticed, that dying memory cgroups are often pinned in memory by a
single pagecache page.  Even under moderate memory pressure they sometimes
stayed in such state for a long time.  That looked strange.

My investigation showed that the problem is caused by applying the LRU
pressure balancing math:

  scan = div64_u64(scan * fraction[lru], denominator),

where

  denominator = fraction[anon] + fraction[file] + 1.

Because fraction[lru] is always less than denominator, if the initial scan
size is 1, the result is always 0.

This means the last page is not scanned and has
no chances to be reclaimed.

Fix this by rounding up the result of the division.

In practice this change significantly improves the speed of dying cgroups
reclaim.

[guro@fb.com: prevent double calculation of DIV64_U64_ROUND_UP() arguments]
  Link: http://lkml.kernel.org/r/20180829213311.GA13501@castle
Link: http://lkml.kernel.org/r/20180827162621.30187-3-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/math64.h |    3 +++
 mm/vmscan.c            |    6 ++++--
 2 files changed, 7 insertions(+), 2 deletions(-)

--- a/include/linux/math64.h
+++ b/include/linux/math64.h
@@ -281,4 +281,7 @@ static inline u64 mul_u64_u32_div(u64 a,
 }
 #endif /* mul_u64_u32_div */
 
+#define DIV64_U64_ROUND_UP(ll, d)	\
+	({ u64 _tmp = (d); div64_u64((ll) + _tmp - 1, _tmp); })
+
 #endif /* _LINUX_MATH64_H */
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2456,9 +2456,11 @@ out:
 			/*
 			 * Scan types proportional to swappiness and
 			 * their relative recent reclaim efficiency.
+			 * Make sure we don't miss the last page
+			 * because of a round-off error.
 			 */
-			scan = div64_u64(scan * fraction[file],
-					 denominator);
+			scan = DIV64_U64_ROUND_UP(scan * fraction[file],
+						  denominator);
 			break;
 		case SCAN_FILE:
 		case SCAN_ANON:

[PATCH 4.19 44/46] Input: elantech - disable elan-i2c for P52 and P72

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benjamin Tissoires <benjamin.tissoires@redhat.com>

commit d21ff5d7f8c397261e095393a1a8e199934720bc upstream.

The current implementation of elan_i2c is known to not support those
2 laptops.

A proper fix is to tweak both elantech and elan_i2c to transmit the
correct information from PS/2, which would make a bad candidate for
stable.

So to give us some time for fixing the root of the problem, disable
elan_i2c for the devices we know are not behaving properly.

Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1803600
Link: https://bugs.archlinux.org/task/59714
Fixes: df077237cf55 Input: elantech - detect new ICs and setup Host Notify for them

Cc: stable@vger.kernel.org  # v4.18+
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/mouse/elantech.c |   18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1767,6 +1767,18 @@ static int elantech_smbus = IS_ENABLED(C
 module_param_named(elantech_smbus, elantech_smbus, int, 0644);
 MODULE_PARM_DESC(elantech_smbus, "Use a secondary bus for the Elantech device.");
 
+static const char * const i2c_blacklist_pnp_ids[] = {
+	/*
+	 * These are known to not be working properly as bits are missing
+	 * in elan_i2c.
+	 */
+	"LEN2131", /* ThinkPad P52 w/ NFC */
+	"LEN2132", /* ThinkPad P52 */
+	"LEN2133", /* ThinkPad P72 w/ NFC */
+	"LEN2134", /* ThinkPad P72 */
+	NULL
+};
+
 static int elantech_create_smbus(struct psmouse *psmouse,
 				 struct elantech_device_info *info,
 				 bool leave_breadcrumbs)
@@ -1802,10 +1814,12 @@ static int elantech_setup_smbus(struct p
 
 	if (elantech_smbus == ELANTECH_SMBUS_NOT_SET) {
 		/*
-		 * New ICs are enabled by default.
+		 * New ICs are enabled by default, unless mentioned in
+		 * i2c_blacklist_pnp_ids.
 		 * Old ICs are up to the user to decide.
 		 */
-		if (!ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version))
+		if (!ETP_NEW_IC_SMBUS_HOST_NOTIFY(info->fw_version) ||
+		    psmouse_matches_pnp_id(psmouse, i2c_blacklist_pnp_ids))
 			return -ENXIO;
 	}
 

[PATCH 4.19 45/46] proc/sysctl: dont return ENOMEM on lookup when a table is unregistering

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ivan Delalande <colona@arista.com>

commit ea5751ccd665a2fd1b24f9af81f6167f0718c5f6 upstream.

proc_sys_lookup can fail with ENOMEM instead of ENOENT when the
corresponding sysctl table is being unregistered. In our case we see
this upon opening /proc/sys/net/*/conf files while network interfaces
are being deleted, which confuses our configuration daemon.

The problem was successfully reproduced and this fix tested on v4.9.122
and v4.20-rc6.

v2: return ERR_PTRs in all cases when proc_sys_make_inode fails instead
of mixing them with NULL. Thanks Al Viro for the feedback.

Fixes: ace0c791e6c3 ("proc/sysctl: Don't grab i_lock under sysctl_lock.")
Cc: stable@vger.kernel.org
Signed-off-by: Ivan Delalande <colona@arista.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/proc/proc_sysctl.c |   13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -464,7 +464,7 @@ static struct inode *proc_sys_make_inode
 
 	inode = new_inode(sb);
 	if (!inode)
-		goto out;
+		return ERR_PTR(-ENOMEM);
 
 	inode->i_ino = get_next_ino();
 
@@ -474,8 +474,7 @@ static struct inode *proc_sys_make_inode
 	if (unlikely(head->unregistering)) {
 		spin_unlock(&sysctl_lock);
 		iput(inode);
-		inode = NULL;
-		goto out;
+		return ERR_PTR(-ENOENT);
 	}
 	ei->sysctl = head;
 	ei->sysctl_entry = table;
@@ -500,7 +499,6 @@ static struct inode *proc_sys_make_inode
 	if (root->set_ownership)
 		root->set_ownership(head, table, &inode->i_uid, &inode->i_gid);
 
-out:
 	return inode;
 }
 
@@ -549,10 +547,11 @@ static struct dentry *proc_sys_lookup(st
 			goto out;
 	}
 
-	err = ERR_PTR(-ENOMEM);
 	inode = proc_sys_make_inode(dir->i_sb, h ? h : head, p);
-	if (!inode)
+	if (IS_ERR(inode)) {
+		err = ERR_CAST(inode);
 		goto out;
+	}
 
 	d_set_d_op(dentry, &proc_sys_dentry_operations);
 	err = d_splice_alias(inode, dentry);
@@ -685,7 +684,7 @@ static bool proc_sys_fill_cache(struct f
 		if (d_in_lookup(child)) {
 			struct dentry *res;
 			inode = proc_sys_make_inode(dir->d_sb, head, table);
-			if (!inode) {
+			if (IS_ERR(inode)) {
 				d_lookup_done(child);
 				dput(child);
 				return false;

[PATCH 4.19 46/46] drm/ioctl: Fix Spectre v1 vulnerabilities

[Greg Kroah-Hartman]

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gustavo A. R. Silva <gustavo@embeddedor.com>

commit 505b5240329b922f21f91d5b5d1e535c805eca6d upstream.

nr is indirectly controlled by user-space, hence leading to a
potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/gpu/drm/drm_ioctl.c:805 drm_ioctl() warn: potential spectre issue 'dev->driver->ioctls' [r]
drivers/gpu/drm/drm_ioctl.c:810 drm_ioctl() warn: potential spectre issue 'drm_ioctls' [r] (local cap)
drivers/gpu/drm/drm_ioctl.c:892 drm_ioctl_flags() warn: potential spectre issue 'drm_ioctls' [r] (local cap)

Fix this by sanitizing nr before using it to index dev->driver->ioctls
and drm_ioctls.

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181220000015.GA18973@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/drm_ioctl.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/drm_ioctl.c
+++ b/drivers/gpu/drm/drm_ioctl.c
@@ -37,6 +37,7 @@
 
 #include <linux/pci.h>
 #include <linux/export.h>
+#include <linux/nospec.h>
 
 /**
  * DOC: getunique and setversion story
@@ -794,13 +795,17 @@ long drm_ioctl(struct file *filp,
 
 	if (is_driver_ioctl) {
 		/* driver ioctl */
-		if (nr - DRM_COMMAND_BASE >= dev->driver->num_ioctls)
+		unsigned int index = nr - DRM_COMMAND_BASE;
+
+		if (index >= dev->driver->num_ioctls)
 			goto err_i1;
-		ioctl = &dev->driver->ioctls[nr - DRM_COMMAND_BASE];
+		index = array_index_nospec(index, dev->driver->num_ioctls);
+		ioctl = &dev->driver->ioctls[index];
 	} else {
 		/* core ioctl */
 		if (nr >= DRM_CORE_IOCTL_COUNT)
 			goto err_i1;
+		nr = array_index_nospec(nr, DRM_CORE_IOCTL_COUNT);
 		ioctl = &drm_ioctls[nr];
 	}
 
@@ -882,6 +887,7 @@ bool drm_ioctl_flags(unsigned int nr, un
 
 	if (nr >= DRM_CORE_IOCTL_COUNT)
 		return false;
+	nr = array_index_nospec(nr, DRM_CORE_IOCTL_COUNT);
 
 	*flags = drm_ioctls[nr].flags;
 	return true;

Re: [PATCH 4.19 00/46] 4.19.13-stable review

[Dan Rue]

On Fri, Dec 28, 2018 at 12:51:54PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.13 release.
> There are 46 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.19.13-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: 08ae917b140b0fdd38906cfd569014b030a0f60e
git describe: v4.19.12-47-g08ae917b140b
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.19-oe/build/v4.19.12-47-g08ae917b140b

No regressions (compared to build v4.19.11-68-g2a7cb228d29c)

No fixes (compared to build v4.19.11-68-g2a7cb228d29c)

Ran 20389 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* boot
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* spectre-meltdown-checker-test
* ltp-open-posix-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.19 00/46] 4.19.13-stable review

[Greg Kroah-Hartman]

On Fri, Dec 28, 2018 at 11:54:22AM -0600, Dan Rue wrote:
> On Fri, Dec 28, 2018 at 12:51:54PM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.19.13 release.
> > There are 46 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> 
> Results from Linaro’s test farm.
> No regressions on arm64, arm, x86_64, and i386.

Thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 4.19 00/46] 4.19.13-stable review

[shuah]

On 12/28/18 4:51 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.13 release.
> There are 46 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Dec 30 11:30:49 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.13-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 4.19 00/46] 4.19.13-stable review

[Greg Kroah-Hartman]

On Fri, Dec 28, 2018 at 01:08:02PM -0700, shuah wrote:
> On 12/28/18 4:51 AM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.19.13 release.
> > There are 46 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sun Dec 30 11:30:49 UTC 2018.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.13-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> > 
> 
> Compiled and booted on my test system. No dmesg regressions.

Thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 4.19 00/46] 4.19.13-stable review

[Guenter Roeck]

On Fri, Dec 28, 2018 at 12:51:54PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.13 release.
> There are 46 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Dec 30 11:30:49 UTC 2018.
> Anything received after that time might be too late.
> 

Build results:
	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 332 pass: 332 fail: 0

Details are available at https://kerneltests.org/builders/.

Guenter

Re: [PATCH 4.19 00/46] 4.19.13-stable review

[Greg Kroah-Hartman]

On Fri, Dec 28, 2018 at 01:29:09PM -0800, Guenter Roeck wrote:
> On Fri, Dec 28, 2018 at 12:51:54PM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.19.13 release.
> > There are 46 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sun Dec 30 11:30:49 UTC 2018.
> > Anything received after that time might be too late.
> > 
> 
> Build results:
> 	total: 155 pass: 155 fail: 0
> Qemu test results:
> 	total: 332 pass: 332 fail: 0
> 
> Details are available at https://kerneltests.org/builders/.

Thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 4.19 00/46] 4.19.13-stable review

[Harsh Shandilya]

On 28 December 2018 5:21:54 PM IST, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
>This is the start of the stable review cycle for the 4.19.13 release.
>There are 46 patches in this series, all will be posted as a response
>to this one.  If anyone has any issues with these being applied, please
>let me know.
>
>Responses should be made by Sun Dec 30 11:30:49 UTC 2018.
>Anything received after that time might be too late.
>
>The whole patch series can be found in one patch at:
>	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.13-rc1.gz
>or in the git tree and branch at:
>	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
>linux-4.19.y
>and the diffstat can be found below.
>
>thanks,
>
>greg k-h
Built and booted on the Lenovo IdeaPad 330-15ARR, no dmesg regressions.
-- 
Harsh Shandilya
PRJKT Development LLC

Re: [PATCH 4.19 00/46] 4.19.13-stable review

[Greg Kroah-Hartman]

On Sat, Dec 29, 2018 at 02:31:33PM +0530, Harsh Shandilya wrote:
> On 28 December 2018 5:21:54 PM IST, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> >This is the start of the stable review cycle for the 4.19.13 release.
> >There are 46 patches in this series, all will be posted as a response
> >to this one.  If anyone has any issues with these being applied, please
> >let me know.
> >
> >Responses should be made by Sun Dec 30 11:30:49 UTC 2018.
> >Anything received after that time might be too late.
> >
> >The whole patch series can be found in one patch at:
> >	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.13-rc1.gz
> >or in the git tree and branch at:
> >	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> >linux-4.19.y
> >and the diffstat can be found below.
> >
> >thanks,
> >
> >greg k-h
> Built and booted on the Lenovo IdeaPad 330-15ARR, no dmesg regressions.

Great, thanks for testing and letting me know.

greg k-h