linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] mmc: atmel-mci: enable 8 bits buswidth support
@ 2019-01-29 16:49 Nicolas Ferre
  2019-01-29 20:12 ` Alexandre Belloni
  2019-01-30  9:20 ` Ulf Hansson
  0 siblings, 2 replies; 3+ messages in thread
From: Nicolas Ferre @ 2019-01-29 16:49 UTC (permalink / raw)
  To: Ludovic Desroches
  Cc: Nicolas Ferre, Ulf Hansson, Alexandre Belloni, linux-mmc,
	linux-arm-kernel, linux-kernel

This patch adds support for 8-bit buswidth.
Relevant SDCR value modified.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
---
 drivers/mmc/host/atmel-mci.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 47189f9ed4e2..735aa5871358 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1410,6 +1410,9 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	case MMC_BUS_WIDTH_4:
 		slot->sdc_reg |= ATMCI_SDCBUS_4BIT;
 		break;
+	case MMC_BUS_WIDTH_8:
+		slot->sdc_reg |= ATMCI_SDCBUS_8BIT;
+		break;
 	}
 
 	if (ios->clock) {
@@ -2275,8 +2278,11 @@ static int atmci_init_slot(struct atmel_mci *host,
 	 * use only one bit for data to prevent fifo underruns and overruns
 	 * which will corrupt data.
 	 */
-	if ((slot_data->bus_width >= 4) && host->caps.has_rwproof)
+	if ((slot_data->bus_width >= 4) && host->caps.has_rwproof) {
 		mmc->caps |= MMC_CAP_4_BIT_DATA;
+		if (slot_data->bus_width >= 8)
+			mmc->caps |= MMC_CAP_8_BIT_DATA;
+	}
 
 	if (atmci_get_version(host) < 0x200) {
 		mmc->max_segs = 256;
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2019-01-30  9:21 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-29 16:49 [PATCH] mmc: atmel-mci: enable 8 bits buswidth support Nicolas Ferre
2019-01-29 20:12 ` Alexandre Belloni
2019-01-30  9:20 ` Ulf Hansson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).