From: Sibi Sankar <sibis@codeaurora.org>
To: robh+dt@kernel.org, andy.gross@linaro.org,
myungjoo.ham@samsung.com, kyungmin.park@samsung.com,
rjw@rjwysocki.net, viresh.kumar@linaro.org, nm@ti.com,
sboyd@kernel.org, georgi.djakov@linaro.org
Cc: bjorn.andersson@linaro.org, david.brown@linaro.org,
mark.rutland@arm.com, linux-kernel@vger.kernel.org,
linux-arm-msm-owner@vger.kernel.org, devicetree@vger.kernel.org,
rnayak@codeaurora.org, cw00.choi@samsung.com,
linux-pm@vger.kernel.org, evgreen@chromium.org,
daidavid1@codeaurora.org, dianders@chromium.org,
Sibi Sankar <sibis@codeaurora.org>
Subject: [PATCH RFC 8/9] arm64: dts: qcom: sdm845: Add cpu OPP tables
Date: Thu, 28 Mar 2019 20:58:21 +0530 [thread overview]
Message-ID: <20190328152822.532-9-sibis@codeaurora.org> (raw)
In-Reply-To: <20190328152822.532-1-sibis@codeaurora.org>
Add a OPP tables for the cpu nodes.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 182 +++++++++++++++++++++++++++
1 file changed, 182 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index cd8ac481381b..072563f6b6cb 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -193,6 +193,7 @@
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
next-level-cache = <&L2_0>;
+ operating-points-v2 = <&cpu0_opp_table>;
L2_0: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -210,6 +211,7 @@
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
next-level-cache = <&L2_100>;
+ operating-points-v2 = <&cpu0_opp_table>;
L2_100: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -224,6 +226,7 @@
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
next-level-cache = <&L2_200>;
+ operating-points-v2 = <&cpu0_opp_table>;
L2_200: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -238,6 +241,7 @@
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
next-level-cache = <&L2_300>;
+ operating-points-v2 = <&cpu0_opp_table>;
L2_300: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -252,6 +256,7 @@
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
next-level-cache = <&L2_400>;
+ operating-points-v2 = <&cpu4_opp_table>;
L2_400: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -266,6 +271,7 @@
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
next-level-cache = <&L2_500>;
+ operating-points-v2 = <&cpu4_opp_table>;
L2_500: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -280,6 +286,7 @@
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
next-level-cache = <&L2_600>;
+ operating-points-v2 = <&cpu4_opp_table>;
L2_600: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -294,6 +301,7 @@
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
next-level-cache = <&L2_700>;
+ operating-points-v2 = <&cpu4_opp_table>;
L2_700: l2-cache {
compatible = "cache";
next-level-cache = <&L3_0>;
@@ -301,6 +309,180 @@
};
};
+ cpu0_opp_table: cpu0_opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ cpu0_opp1: opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ };
+
+ cpu0_opp2: opp-403200000 {
+ opp-hz = /bits/ 64 <403200000>;
+ };
+
+ cpu0_opp3: opp-480000000 {
+ opp-hz = /bits/ 64 <480000000>;
+ };
+
+ cpu0_opp4: opp-576000000 {
+ opp-hz = /bits/ 64 <576000000>;
+ };
+
+ cpu0_opp5: opp-652800000 {
+ opp-hz = /bits/ 64 <652800000>;
+ };
+
+ cpu0_opp6: opp-748800000 {
+ opp-hz = /bits/ 64 <748800000>;
+ };
+
+ cpu0_opp7: opp-825600000 {
+ opp-hz = /bits/ 64 <825600000>;
+ };
+
+ cpu0_opp8: opp-902400000 {
+ opp-hz = /bits/ 64 <902400000>;
+ };
+
+ cpu0_opp9: opp-979200000 {
+ opp-hz = /bits/ 64 <979200000>;
+ };
+
+ cpu0_opp10: opp-1056000000 {
+ opp-hz = /bits/ 64 <1056000000>;
+ };
+
+ cpu0_opp11: opp-1132800000 {
+ opp-hz = /bits/ 64 <1132800000>;
+ };
+
+ cpu0_opp12: opp-1228800000 {
+ opp-hz = /bits/ 64 <1228800000>;
+ };
+
+ cpu0_opp13: opp-1324800000 {
+ opp-hz = /bits/ 64 <1324800000>;
+ };
+
+ cpu0_opp14: opp-1420800000 {
+ opp-hz = /bits/ 64 <1420800000>;
+ };
+
+ cpu0_opp15: opp-1516800000 {
+ opp-hz = /bits/ 64 <1516800000>;
+ };
+
+ cpu0_opp16: opp-1612800000 {
+ opp-hz = /bits/ 64 <1612800000>;
+ };
+
+ cpu0_opp17: opp-1689600000 {
+ opp-hz = /bits/ 64 <1689600000>;
+ };
+
+ cpu0_opp18: opp-1766400000 {
+ opp-hz = /bits/ 64 <1766400000>;
+ };
+ };
+
+ cpu4_opp_table: cpu4_opp_table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ cpu4_opp1: opp-825600000 {
+ opp-hz = /bits/ 64 <825600000>;
+ };
+
+ cpu4_opp2: opp-902400000 {
+ opp-hz = /bits/ 64 <902400000>;
+ };
+
+ cpu4_opp3: opp-979200000 {
+ opp-hz = /bits/ 64 <979200000>;
+ };
+
+ cpu4_opp4: opp-1056000000 {
+ opp-hz = /bits/ 64 <1056000000>;
+ };
+
+ cpu4_opp5: opp-1209600000 {
+ opp-hz = /bits/ 64 <1209600000>;
+ };
+
+ cpu4_opp6: opp-1286400000 {
+ opp-hz = /bits/ 64 <1286400000>;
+ };
+
+ cpu4_opp7: opp-1363200000 {
+ opp-hz = /bits/ 64 <1363200000>;
+ };
+
+ cpu4_opp8: opp-1459200000 {
+ opp-hz = /bits/ 64 <1459200000>;
+ };
+
+ cpu4_opp9: opp-1536000000 {
+ opp-hz = /bits/ 64 <1536000000>;
+ };
+
+ cpu4_opp10: opp-1612800000 {
+ opp-hz = /bits/ 64 <1612800000>;
+ };
+
+ cpu4_opp11: opp-1689600000 {
+ opp-hz = /bits/ 64 <1689600000>;
+ };
+
+ cpu4_opp12: opp-1766400000 {
+ opp-hz = /bits/ 64 <1766400000>;
+ };
+
+ cpu4_opp13: opp-1843200000 {
+ opp-hz = /bits/ 64 <1843200000>;
+ };
+
+ cpu4_opp14: opp-1920000000 {
+ opp-hz = /bits/ 64 <1920000000>;
+ };
+
+ cpu4_opp15: opp-1996800000 {
+ opp-hz = /bits/ 64 <1996800000>;
+ };
+
+ cpu4_opp16: opp-2092800000 {
+ opp-hz = /bits/ 64 <2092800000>;
+ };
+
+ cpu4_opp17: opp-2169600000 {
+ opp-hz = /bits/ 64 <2169600000>;
+ };
+
+ cpu4_opp18: opp-2246400000 {
+ opp-hz = /bits/ 64 <2246400000>;
+ };
+
+ cpu4_opp19: opp-2323200000 {
+ opp-hz = /bits/ 64 <2323200000>;
+ };
+
+ cpu4_opp20: opp-2400000000 {
+ opp-hz = /bits/ 64 <2400000000>;
+ };
+
+ cpu4_opp21: opp-2476800000 {
+ opp-hz = /bits/ 64 <2476800000>;
+ };
+
+ cpu4_opp22: opp-2553600000 {
+ opp-hz = /bits/ 64 <2553600000>;
+ };
+
+ cpu4_opp23: opp-2649600000 {
+ opp-hz = /bits/ 64 <2649600000>;
+ };
+ };
+
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2019-03-28 15:29 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-28 15:28 [PATCH RFC 0/9] Add CPU based scaling support to Passive governor Sibi Sankar
2019-03-28 15:28 ` [PATCH RFC 1/9] OPP: Add and export helpers to get avg/peak bw Sibi Sankar
2019-03-28 15:28 ` [PATCH RFC 2/9] OPP: Export a number of helpers to prevent code duplication Sibi Sankar
2019-07-08 3:28 ` Hsin-Yi Wang
2019-07-10 8:01 ` Sibi Sankar
2019-03-28 15:28 ` [PATCH RFC 3/9] PM / devfreq: Add cpu based scaling support to passive_governor Sibi Sankar
2019-04-12 7:39 ` Chanwoo Choi
2019-05-27 8:23 ` Sibi Sankar
2019-05-28 1:27 ` Chanwoo Choi
2019-03-28 15:28 ` [PATCH RFC 4/9] dt-bindings: devfreq: Add bindings for devfreq dev-icbw driver Sibi Sankar
2019-03-28 15:28 ` [PATCH RFC 5/9] PM / devfreq: Add devfreq driver for interconnect bandwidth voting Sibi Sankar
2019-03-28 15:28 ` [PATCH RFC 6/9] OPP: Add and export helper to update voltage Sibi Sankar
2019-04-10 10:24 ` Viresh Kumar
2019-04-10 11:08 ` Sibi Sankar
2019-03-28 15:28 ` [PATCH RFC 7/9] cpufreq: qcom: Add support to update cpu node's OPP tables Sibi Sankar
2019-04-10 10:33 ` Viresh Kumar
2019-04-10 11:16 ` Sibi Sankar
2019-04-10 11:25 ` Viresh Kumar
2019-03-28 15:28 ` Sibi Sankar [this message]
2019-03-28 15:28 ` [PATCH RFC 9/9] arm64: dts: qcom: sdm845: Add nodes for icbw driver and opp tables Sibi Sankar
2019-04-11 7:02 ` [PATCH RFC 0/9] Add CPU based scaling support to Passive governor Sibi Sankar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190328152822.532-9-sibis@codeaurora.org \
--to=sibis@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=cw00.choi@samsung.com \
--cc=daidavid1@codeaurora.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=georgi.djakov@linaro.org \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-msm-owner@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=myungjoo.ham@samsung.com \
--cc=nm@ti.com \
--cc=rjw@rjwysocki.net \
--cc=rnayak@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).