[v7 1/3] dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list

[v7 1/3] dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list

[Peng Ma]

Add lx2160a compatible to bindings documentation.

Signed-off-by: Peng Ma <peng.ma@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
changed for V7:
	- add Reviewed by tag.

 .../devicetree/bindings/ata/ahci-fsl-qoriq.txt     |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
index 7c3ca0e..9ecc019 100644
--- a/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-fsl-qoriq.txt
@@ -3,7 +3,7 @@ Binding for Freescale QorIQ AHCI SATA Controller
 Required properties:
   - reg: Physical base address and size of the controller's register area.
   - compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where
-    chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a etc.
+    chip could be ls1021a, ls1043a, ls1046a, ls1088a, ls2080a, lx2160a, etc.
   - clocks: Input clock specifier. Refer to common clock bindings.
   - interrupts: Interrupt specifier. Refer to interrupt binding.
 
-- 
1.7.1

[v7 2/3] arm64: dts: lx2160a: add sata node support

[Peng Ma]

Add SATA device nodes for fsl-lx2160a and enable support
for QDS and RDB boards.

Signed-off-by: Peng Ma <peng.ma@nxp.com>
---
changed for V7:
	- no changed

 arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts |   16 +++++++
 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts |   16 +++++++
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi    |   44 +++++++++++++++++++++
 3 files changed, 76 insertions(+), 0 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
index 99a22ab..1a5acf6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
@@ -95,6 +95,22 @@
 	};
 };
 
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
index 6481e5f..5b6799e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -102,6 +102,22 @@
 	};
 };
 
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index a79f5c1..592034b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -671,6 +671,50 @@
 			status = "disabled";
 		};
 
+		sata0: sata@3200000 {
+			compatible = "fsl,lx2160a-ahci";
+			reg = <0x0 0x3200000 0x0 0x10000>,
+			      <0x7 0x100520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 3>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		sata1: sata@3210000 {
+			compatible = "fsl,lx2160a-ahci";
+			reg = <0x0 0x3210000 0x0 0x10000>,
+			      <0x7 0x100520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 3>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		sata2: sata@3220000 {
+			compatible = "fsl,lx2160a-ahci";
+			reg = <0x0 0x3220000 0x0 0x10000>,
+			      <0x7 0x100520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 3>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		sata3: sata@3230000 {
+			compatible = "fsl,lx2160a-ahci";
+			reg = <0x0 0x3230000 0x0 0x10000>,
+			      <0x7 0x100520 0x0 0x4>;
+			reg-names = "ahci", "sata-ecc";
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 3>;
+			dma-coherent;
+			status = "disabled";
+		};
+
 		smmu: iommu@5000000 {
 			compatible = "arm,mmu-500";
 			reg = <0 0x5000000 0 0x800000>;
-- 
1.7.1

[v7 3/3] ahci: qoriq: add lx2160 platforms support

[Peng Ma]

Lx2160a is a new introduced soc which supports ATA3.0

Signed-off-by: Peng Ma <peng.ma@nxp.com>
---
changed for V7:
	- no changed.

 drivers/ata/ahci_qoriq.c |   52 +++++++++++++++++++++++++++++++---------------
 1 files changed, 35 insertions(+), 17 deletions(-)

diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c
index ce59253..08dbb86 100644
--- a/drivers/ata/ahci_qoriq.c
+++ b/drivers/ata/ahci_qoriq.c
@@ -58,6 +58,7 @@ enum ahci_qoriq_type {
 	AHCI_LS1046A,
 	AHCI_LS1088A,
 	AHCI_LS2088A,
+	AHCI_LX2160A,
 };
 
 struct ahci_qoriq_priv {
@@ -67,6 +68,8 @@ struct ahci_qoriq_priv {
 	bool is_dmacoherent;
 };
 
+static bool ecc_initialized;
+
 static const struct of_device_id ahci_qoriq_of_match[] = {
 	{ .compatible = "fsl,ls1021a-ahci", .data = (void *)AHCI_LS1021A},
 	{ .compatible = "fsl,ls1043a-ahci", .data = (void *)AHCI_LS1043A},
@@ -74,6 +77,7 @@ struct ahci_qoriq_priv {
 	{ .compatible = "fsl,ls1046a-ahci", .data = (void *)AHCI_LS1046A},
 	{ .compatible = "fsl,ls1088a-ahci", .data = (void *)AHCI_LS1088A},
 	{ .compatible = "fsl,ls2088a-ahci", .data = (void *)AHCI_LS2088A},
+	{ .compatible = "fsl,lx2160a-ahci", .data = (void *)AHCI_LX2160A},
 	{},
 };
 MODULE_DEVICE_TABLE(of, ahci_qoriq_of_match);
@@ -165,9 +169,10 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
 
 	switch (qpriv->type) {
 	case AHCI_LS1021A:
-		if (!qpriv->ecc_addr)
+		if (!(qpriv->ecc_addr || ecc_initialized))
 			return -EINVAL;
-		writel(SATA_ECC_DISABLE, qpriv->ecc_addr);
+		else if (qpriv->ecc_addr && !ecc_initialized)
+			writel(SATA_ECC_DISABLE, qpriv->ecc_addr);
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
 		writel(LS1021A_PORT_PHY2, reg_base + PORT_PHY2);
 		writel(LS1021A_PORT_PHY3, reg_base + PORT_PHY3);
@@ -180,10 +185,12 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
 		break;
 
 	case AHCI_LS1043A:
-		if (!qpriv->ecc_addr)
+		if (!(qpriv->ecc_addr || ecc_initialized))
 			return -EINVAL;
-		writel(readl(qpriv->ecc_addr) | ECC_DIS_ARMV8_CH2,
-				qpriv->ecc_addr);
+		else if (qpriv->ecc_addr && !ecc_initialized)
+			writel(readl(qpriv->ecc_addr) |
+			       ECC_DIS_ARMV8_CH2,
+			       qpriv->ecc_addr);
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
 		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
 		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
@@ -202,10 +209,12 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
 		break;
 
 	case AHCI_LS1046A:
-		if (!qpriv->ecc_addr)
+		if (!(qpriv->ecc_addr || ecc_initialized))
 			return -EINVAL;
-		writel(readl(qpriv->ecc_addr) | ECC_DIS_ARMV8_CH2,
-				qpriv->ecc_addr);
+		else if (qpriv->ecc_addr && !ecc_initialized)
+			writel(readl(qpriv->ecc_addr) |
+			       ECC_DIS_ARMV8_CH2,
+			       qpriv->ecc_addr);
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
 		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
 		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
@@ -215,10 +224,13 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
 		break;
 
 	case AHCI_LS1088A:
-		if (!qpriv->ecc_addr)
+	case AHCI_LX2160A:
+		if (!(qpriv->ecc_addr || ecc_initialized))
 			return -EINVAL;
-		writel(readl(qpriv->ecc_addr) | ECC_DIS_LS1088A,
-		       qpriv->ecc_addr);
+		else if (qpriv->ecc_addr && !ecc_initialized)
+			writel(readl(qpriv->ecc_addr) |
+			       ECC_DIS_LS1088A,
+			       qpriv->ecc_addr);
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
 		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
 		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
@@ -237,6 +249,7 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
 		break;
 	}
 
+	ecc_initialized = true;
 	return 0;
 }
 
@@ -264,13 +277,18 @@ static int ahci_qoriq_probe(struct platform_device *pdev)
 
 	qoriq_priv->type = (enum ahci_qoriq_type)of_id->data;
 
-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-			"sata-ecc");
-	if (res) {
-		qoriq_priv->ecc_addr = devm_ioremap_resource(dev, res);
-		if (IS_ERR(qoriq_priv->ecc_addr))
-			return PTR_ERR(qoriq_priv->ecc_addr);
+	if (unlikely(!ecc_initialized)) {
+		res = platform_get_resource_byname(pdev,
+						   IORESOURCE_MEM,
+						   "sata-ecc");
+		if (res) {
+			qoriq_priv->ecc_addr =
+				devm_ioremap_resource(dev, res);
+			if (IS_ERR(qoriq_priv->ecc_addr))
+				return PTR_ERR(qoriq_priv->ecc_addr);
+		}
 	}
+
 	qoriq_priv->is_dmacoherent = of_dma_is_coherent(np);
 
 	rc = ahci_platform_enable_resources(hpriv);
-- 
1.7.1

RE: [v7 3/3] ahci: qoriq: add lx2160 platforms support

[Peng Ma]

Hi axboe,

If you have no comments on these paths, please merge.
Thank you very much.
Patch link:
http://patchwork.ozlabs.org/patch/1055028/
http://patchwork.ozlabs.org/patch/1054189/

Best Regards,
Peng
>-----Original Message-----
>From: Peng Ma <peng.ma@nxp.com>
>Sent: 2019年3月12日 9:50
>To: axboe@kernel.dk; robh+dt@kernel.org; mark.rutland@arm.com;
>shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>
>Cc: linux-ide@vger.kernel.org; devicetree@vger.kernel.org;
>linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; Peng Ma
><peng.ma@nxp.com>
>Subject: [v7 3/3] ahci: qoriq: add lx2160 platforms support
>
>Lx2160a is a new introduced soc which supports ATA3.0
>
>Signed-off-by: Peng Ma <peng.ma@nxp.com>
>---
>changed for V7:
>	- no changed.
>
> drivers/ata/ahci_qoriq.c |   52
>+++++++++++++++++++++++++++++++---------------
> 1 files changed, 35 insertions(+), 17 deletions(-)
>
>diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c index
>ce59253..08dbb86 100644
>--- a/drivers/ata/ahci_qoriq.c
>+++ b/drivers/ata/ahci_qoriq.c
>@@ -58,6 +58,7 @@ enum ahci_qoriq_type {
> 	AHCI_LS1046A,
> 	AHCI_LS1088A,
> 	AHCI_LS2088A,
>+	AHCI_LX2160A,
> };
>
> struct ahci_qoriq_priv {
>@@ -67,6 +68,8 @@ struct ahci_qoriq_priv {
> 	bool is_dmacoherent;
> };
>
>+static bool ecc_initialized;
>+
> static const struct of_device_id ahci_qoriq_of_match[] = {
> 	{ .compatible = "fsl,ls1021a-ahci", .data = (void *)AHCI_LS1021A},
> 	{ .compatible = "fsl,ls1043a-ahci", .data = (void *)AHCI_LS1043A}, @@
>-74,6 +77,7 @@ struct ahci_qoriq_priv {
> 	{ .compatible = "fsl,ls1046a-ahci", .data = (void *)AHCI_LS1046A},
> 	{ .compatible = "fsl,ls1088a-ahci", .data = (void *)AHCI_LS1088A},
> 	{ .compatible = "fsl,ls2088a-ahci", .data = (void *)AHCI_LS2088A},
>+	{ .compatible = "fsl,lx2160a-ahci", .data = (void *)AHCI_LX2160A},
> 	{},
> };
> MODULE_DEVICE_TABLE(of, ahci_qoriq_of_match); @@ -165,9 +169,10 @@
>static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
>
> 	switch (qpriv->type) {
> 	case AHCI_LS1021A:
>-		if (!qpriv->ecc_addr)
>+		if (!(qpriv->ecc_addr || ecc_initialized))
> 			return -EINVAL;
>-		writel(SATA_ECC_DISABLE, qpriv->ecc_addr);
>+		else if (qpriv->ecc_addr && !ecc_initialized)
>+			writel(SATA_ECC_DISABLE, qpriv->ecc_addr);
> 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
> 		writel(LS1021A_PORT_PHY2, reg_base + PORT_PHY2);
> 		writel(LS1021A_PORT_PHY3, reg_base + PORT_PHY3); @@ -180,10
>+185,12 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
> 		break;
>
> 	case AHCI_LS1043A:
>-		if (!qpriv->ecc_addr)
>+		if (!(qpriv->ecc_addr || ecc_initialized))
> 			return -EINVAL;
>-		writel(readl(qpriv->ecc_addr) | ECC_DIS_ARMV8_CH2,
>-				qpriv->ecc_addr);
>+		else if (qpriv->ecc_addr && !ecc_initialized)
>+			writel(readl(qpriv->ecc_addr) |
>+			       ECC_DIS_ARMV8_CH2,
>+			       qpriv->ecc_addr);
> 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
> 		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
> 		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3); @@
>-202,10 +209,12 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv
>*hpriv)
> 		break;
>
> 	case AHCI_LS1046A:
>-		if (!qpriv->ecc_addr)
>+		if (!(qpriv->ecc_addr || ecc_initialized))
> 			return -EINVAL;
>-		writel(readl(qpriv->ecc_addr) | ECC_DIS_ARMV8_CH2,
>-				qpriv->ecc_addr);
>+		else if (qpriv->ecc_addr && !ecc_initialized)
>+			writel(readl(qpriv->ecc_addr) |
>+			       ECC_DIS_ARMV8_CH2,
>+			       qpriv->ecc_addr);
> 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
> 		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
> 		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3); @@
>-215,10 +224,13 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv
>*hpriv)
> 		break;
>
> 	case AHCI_LS1088A:
>-		if (!qpriv->ecc_addr)
>+	case AHCI_LX2160A:
>+		if (!(qpriv->ecc_addr || ecc_initialized))
> 			return -EINVAL;
>-		writel(readl(qpriv->ecc_addr) | ECC_DIS_LS1088A,
>-		       qpriv->ecc_addr);
>+		else if (qpriv->ecc_addr && !ecc_initialized)
>+			writel(readl(qpriv->ecc_addr) |
>+			       ECC_DIS_LS1088A,
>+			       qpriv->ecc_addr);
> 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
> 		writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
> 		writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3); @@ -237,6
>+249,7 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
> 		break;
> 	}
>
>+	ecc_initialized = true;
> 	return 0;
> }
>
>@@ -264,13 +277,18 @@ static int ahci_qoriq_probe(struct platform_device
>*pdev)
>
> 	qoriq_priv->type = (enum ahci_qoriq_type)of_id->data;
>
>-	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
>-			"sata-ecc");
>-	if (res) {
>-		qoriq_priv->ecc_addr = devm_ioremap_resource(dev, res);
>-		if (IS_ERR(qoriq_priv->ecc_addr))
>-			return PTR_ERR(qoriq_priv->ecc_addr);
>+	if (unlikely(!ecc_initialized)) {
>+		res = platform_get_resource_byname(pdev,
>+						   IORESOURCE_MEM,
>+						   "sata-ecc");
>+		if (res) {
>+			qoriq_priv->ecc_addr =
>+				devm_ioremap_resource(dev, res);
>+			if (IS_ERR(qoriq_priv->ecc_addr))
>+				return PTR_ERR(qoriq_priv->ecc_addr);
>+		}
> 	}
>+
> 	qoriq_priv->is_dmacoherent = of_dma_is_coherent(np);
>
> 	rc = ahci_platform_enable_resources(hpriv);
>--
>1.7.1

Re: [v7 3/3] ahci: qoriq: add lx2160 platforms support

[Jens Axboe]

On 4/8/19 4:06 AM, Peng Ma wrote:
> Hi axboe,
> 
> If you have no comments on these paths, please merge.
> Thank you very much.
> Patch link:
> http://patchwork.ozlabs.org/patch/1055028/
> http://patchwork.ozlabs.org/patch/1054189/

Can you resend, it's not clear which is which here, and what parts
of the series goes where.

-- 
Jens Axboe

RE: [EXT] Re: [v7 3/3] ahci: qoriq: add lx2160 platforms support

[Peng Ma]

Hi Axboe,

Patch link:

http://patchwork.ozlabs.org/patch/1055028/

http://patchwork.ozlabs.org/patch/1054189/

Best Regards,
Peng

>-----Original Message-----
>From: Jens Axboe <axboe@kernel.dk>
>Sent: 2019年4月8日 23:21
>To: Peng Ma <peng.ma@nxp.com>; robh+dt@kernel.org;
>mark.rutland@arm.com; shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>
>Cc: linux-ide@vger.kernel.org; devicetree@vger.kernel.org;
>linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; Andy Tang
><andy.tang@nxp.com>
>Subject: [EXT] Re: [v7 3/3] ahci: qoriq: add lx2160 platforms support
>
>WARNING: This email was created outside of NXP. DO NOT CLICK links or
>attachments unless you recognize the sender and know the content is safe.
>
>
>
>On 4/8/19 4:06 AM, Peng Ma wrote:
>> Hi axboe,
>>
>> If you have no comments on these paths, please merge.
>> Thank you very much.
>> Patch link:
>> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fpatch
>>
>work.ozlabs.org%2Fpatch%2F1055028%2F&amp;data=02%7C01%7Cpeng.ma
>%40nxp.
>>
>com%7C40e859676606431ce84908d6bc35bf3d%7C686ea1d3bc2b4c6fa92cd9
>9c5c301
>>
>635%7C0%7C1%7C636903336364109322&amp;sdata=Q8vElMkaDmHvphhVo
>12BtFUvqXp
>> T%2BDBrnvdjV%2FFizfs%3D&amp;reserved=0
>> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fpatch
>>
>work.ozlabs.org%2Fpatch%2F1054189%2F&amp;data=02%7C01%7Cpeng.ma
>%40nxp.
>>
>com%7C40e859676606431ce84908d6bc35bf3d%7C686ea1d3bc2b4c6fa92cd9
>9c5c301
>>
>635%7C0%7C1%7C636903336364109322&amp;sdata=HNuiGz%2BhfegcgNQ7
>T%2BPqGPI
>> bS3ch%2FUqtxmHBfL6MoRo%3D&amp;reserved=0
>
>Can you resend, it's not clear which is which here, and what parts of the series
>goes where.
>
>--
>Jens Axboe

Re: [EXT] Re: [v7 3/3] ahci: qoriq: add lx2160 platforms support

[Jens Axboe]

On 4/9/19 12:44 AM, Peng Ma wrote:
> Hi Axboe,
> 
> Patch link:
> 
> http://patchwork.ozlabs.org/patch/1055028/
> 
> http://patchwork.ozlabs.org/patch/1054189/

Applied, thanks.

-- 
Jens Axboe

RE: [EXT] Re: [v7 3/3] ahci: qoriq: add lx2160 platforms support

[Peng Ma]

Hi Axboe,

Thanks very much.

Best Regards,
Peng

>-----Original Message-----
>From: Jens Axboe <axboe@kernel.dk>
>Sent: 2019年4月9日 22:17
>To: Peng Ma <peng.ma@nxp.com>; robh+dt@kernel.org;
>mark.rutland@arm.com; shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>
>Cc: linux-ide@vger.kernel.org; devicetree@vger.kernel.org;
>linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; Andy Tang
><andy.tang@nxp.com>; Jianchao Wang <jianchao.wang@nxp.com>
>Subject: Re: [EXT] Re: [v7 3/3] ahci: qoriq: add lx2160 platforms support
>
>WARNING: This email was created outside of NXP. DO NOT CLICK links or
>attachments unless you recognize the sender and know the content is safe.
>
>
>
>On 4/9/19 12:44 AM, Peng Ma wrote:
>> Hi Axboe,
>>
>> Patch link:
>>
>>
>https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fpatchwo
>rk.ozlabs.org%2Fpatch%2F1055028%2F&amp;data=02%7C01%7Cpeng.ma%40
>nxp.com%7Ce76be539c24a4733cf3f08d6bcf618de%7C686ea1d3bc2b4c6fa92
>cd99c5c301635%7C0%7C1%7C636904162505501500&amp;sdata=Am7QEJ2Y
>sqkNLXUtIMXU%2Fs5Mt4QhzYYa1FjbhWaAXiw%3D&amp;reserved=0
>>
>>
>https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fpatchwo
>rk.ozlabs.org%2Fpatch%2F1054189%2F&amp;data=02%7C01%7Cpeng.ma%40
>nxp.com%7Ce76be539c24a4733cf3f08d6bcf618de%7C686ea1d3bc2b4c6fa92
>cd99c5c301635%7C0%7C1%7C636904162505501500&amp;sdata=ikpNC4M%
>2BDq3%2FPYsXLHbPDcDu2KfgIRXs%2BjDDXWtp2jk%3D&amp;reserved=0
>
>Applied, thanks.
>
>--
>Jens Axboe

Re: [v7 2/3] arm64: dts: lx2160a: add sata node support

[Shawn Guo]

On Tue, Mar 12, 2019 at 09:50:18AM +0800, Peng Ma wrote:
> Add SATA device nodes for fsl-lx2160a and enable support
> for QDS and RDB boards.
> 
> Signed-off-by: Peng Ma <peng.ma@nxp.com>

Applied, thanks.

Re: [v7 1/3] dt-bindings: ahci-fsl-qoriq: add lx2160a chip name to the list

[Shawn Guo]

On Tue, Mar 12, 2019 at 09:50:17AM +0800, Peng Ma wrote:
> Add lx2160a compatible to bindings documentation.
> 
> Signed-off-by: Peng Ma <peng.ma@nxp.com>
> Reviewed-by: Rob Herring <robh@kernel.org>

I assume that the bindings will go via AHCI tree.  Otherwise, please let
me know.

Shawn