* [PATCH] staging: rtl8*: use help instead of ---help--- in Kconfig
@ 2019-04-20 11:37 MosesChristopher
2019-04-20 17:00 ` Larry Finger
0 siblings, 1 reply; 2+ messages in thread
From: MosesChristopher @ 2019-04-20 11:37 UTC (permalink / raw)
To: Larry.Finger, gregkh, florian.c.schilhabel, insafonov, hdegoede
Cc: devel, linux-kernel, Moses Christopher
From: Moses Christopher <moseschristopherb@gmail.com>
- Resolve the following warning from the Kconfig,
"WARNING: prefer 'help' over '---help---' for new help texts"
Signed-off-by: Moses Christopher <moseschristopherb@gmail.com>
---
drivers/staging/rtl8188eu/Kconfig | 4 ++--
drivers/staging/rtl8192e/Kconfig | 8 ++++----
drivers/staging/rtl8712/Kconfig | 4 ++--
drivers/staging/rtl8723bs/Kconfig | 2 +-
4 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/staging/rtl8188eu/Kconfig b/drivers/staging/rtl8188eu/Kconfig
index ff7832798a77..3f8c655856bf 100644
--- a/drivers/staging/rtl8188eu/Kconfig
+++ b/drivers/staging/rtl8188eu/Kconfig
@@ -7,7 +7,7 @@ config R8188EU
select LIB80211
select LIB80211_CRYPT_WEP
select LIB80211_CRYPT_CCMP
- ---help---
+ help
This option adds the Realtek RTL8188EU USB device such as TP-Link TL-WN725N.
If built as a module, it will be called r8188eu.
@@ -16,7 +16,7 @@ if R8188EU
config 88EU_AP_MODE
bool "Realtek RTL8188EU AP mode"
default y
- ---help---
+ help
This option enables Access Point mode. Unless you know that your system
will never be used as an AP, or the target system has limited memory,
"Y" should be selected.
diff --git a/drivers/staging/rtl8192e/Kconfig b/drivers/staging/rtl8192e/Kconfig
index 4602a47cdb4a..aa571c12678f 100644
--- a/drivers/staging/rtl8192e/Kconfig
+++ b/drivers/staging/rtl8192e/Kconfig
@@ -3,7 +3,7 @@ config RTLLIB
depends on WLAN && m
default n
select LIB80211
- ---help---
+ help
If you have a wireless card that uses rtllib, say
Y. Currently the only card is the rtl8192e.
@@ -16,7 +16,7 @@ config RTLLIB_CRYPTO_CCMP
depends on RTLLIB
select CRYPTO_AES
default y
- ---help---
+ help
CCMP crypto driver for rtllib.
If you enabled RTLLIB, you want this.
@@ -27,7 +27,7 @@ config RTLLIB_CRYPTO_TKIP
select CRYPTO_ARC4
select CRYPTO_MICHAEL_MIC
default y
- ---help---
+ help
TKIP crypto driver for rtllib.
If you enabled RTLLIB, you want this.
@@ -37,7 +37,7 @@ config RTLLIB_CRYPTO_WEP
select CRYPTO_ARC4
depends on RTLLIB
default y
- ---help---
+ help
TKIP crypto driver for rtllib.
If you enabled RTLLIB, you want this.
diff --git a/drivers/staging/rtl8712/Kconfig b/drivers/staging/rtl8712/Kconfig
index f160eee52f09..b377d90742db 100644
--- a/drivers/staging/rtl8712/Kconfig
+++ b/drivers/staging/rtl8712/Kconfig
@@ -4,14 +4,14 @@ config R8712U
select WIRELESS_EXT
select WEXT_PRIV
select FW_LOADER
- ---help---
+ help
This option adds the Realtek RTL8712 USB device such as the D-Link DWA-130.
If built as a module, it will be called r8712u.
config R8712_TX_AGGR
bool "Realtek RTL8712U Transmit Aggregation code"
depends on R8712U && BROKEN
- ---help---
+ help
This option provides transmit aggregation for the Realtek RTL8712 USB device.
diff --git a/drivers/staging/rtl8723bs/Kconfig b/drivers/staging/rtl8723bs/Kconfig
index deae0427ba6c..41ad6ed24860 100644
--- a/drivers/staging/rtl8723bs/Kconfig
+++ b/drivers/staging/rtl8723bs/Kconfig
@@ -4,7 +4,7 @@ config RTL8723BS
depends on m
select WIRELESS_EXT
select WEXT_PRIV
- ---help---
+ help
This option enables support for RTL8723BS SDIO drivers, such as
the wifi found on the 1st gen Intel Compute Stick, the CHIP
and many other Intel Atom and ARM based devices.
--
2.11.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] staging: rtl8*: use help instead of ---help--- in Kconfig
2019-04-20 11:37 [PATCH] staging: rtl8*: use help instead of ---help--- in Kconfig MosesChristopher
@ 2019-04-20 17:00 ` Larry Finger
0 siblings, 0 replies; 2+ messages in thread
From: Larry Finger @ 2019-04-20 17:00 UTC (permalink / raw)
To: MosesChristopher, gregkh, florian.c.schilhabel, insafonov, hdegoede
Cc: devel, linux-kernel
On 4/20/19 6:37 AM, MosesChristopher wrote:
> From: Moses Christopher <moseschristopherb@gmail.com>
>
> - Resolve the following warning from the Kconfig,
> "WARNING: prefer 'help' over '---help---' for new help texts"
>
> Signed-off-by: Moses Christopher <moseschristopherb@gmail.com>
I have never seen this warning, but your Kconfig may be newer than mine. In any
case, the changes are harmless.
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
> ---
> drivers/staging/rtl8188eu/Kconfig | 4 ++--
> drivers/staging/rtl8192e/Kconfig | 8 ++++----
> drivers/staging/rtl8712/Kconfig | 4 ++--
> drivers/staging/rtl8723bs/Kconfig | 2 +-
> 4 files changed, 9 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/staging/rtl8188eu/Kconfig b/drivers/staging/rtl8188eu/Kconfig
> index ff7832798a77..3f8c655856bf 100644
> --- a/drivers/staging/rtl8188eu/Kconfig
> +++ b/drivers/staging/rtl8188eu/Kconfig
> @@ -7,7 +7,7 @@ config R8188EU
> select LIB80211
> select LIB80211_CRYPT_WEP
> select LIB80211_CRYPT_CCMP
> - ---help---
> + help
> This option adds the Realtek RTL8188EU USB device such as TP-Link TL-WN725N.
> If built as a module, it will be called r8188eu.
>
> @@ -16,7 +16,7 @@ if R8188EU
> config 88EU_AP_MODE
> bool "Realtek RTL8188EU AP mode"
> default y
> - ---help---
> + help
> This option enables Access Point mode. Unless you know that your system
> will never be used as an AP, or the target system has limited memory,
> "Y" should be selected.
> diff --git a/drivers/staging/rtl8192e/Kconfig b/drivers/staging/rtl8192e/Kconfig
> index 4602a47cdb4a..aa571c12678f 100644
> --- a/drivers/staging/rtl8192e/Kconfig
> +++ b/drivers/staging/rtl8192e/Kconfig
> @@ -3,7 +3,7 @@ config RTLLIB
> depends on WLAN && m
> default n
> select LIB80211
> - ---help---
> + help
> If you have a wireless card that uses rtllib, say
> Y. Currently the only card is the rtl8192e.
>
> @@ -16,7 +16,7 @@ config RTLLIB_CRYPTO_CCMP
> depends on RTLLIB
> select CRYPTO_AES
> default y
> - ---help---
> + help
> CCMP crypto driver for rtllib.
>
> If you enabled RTLLIB, you want this.
> @@ -27,7 +27,7 @@ config RTLLIB_CRYPTO_TKIP
> select CRYPTO_ARC4
> select CRYPTO_MICHAEL_MIC
> default y
> - ---help---
> + help
> TKIP crypto driver for rtllib.
>
> If you enabled RTLLIB, you want this.
> @@ -37,7 +37,7 @@ config RTLLIB_CRYPTO_WEP
> select CRYPTO_ARC4
> depends on RTLLIB
> default y
> - ---help---
> + help
> TKIP crypto driver for rtllib.
>
> If you enabled RTLLIB, you want this.
> diff --git a/drivers/staging/rtl8712/Kconfig b/drivers/staging/rtl8712/Kconfig
> index f160eee52f09..b377d90742db 100644
> --- a/drivers/staging/rtl8712/Kconfig
> +++ b/drivers/staging/rtl8712/Kconfig
> @@ -4,14 +4,14 @@ config R8712U
> select WIRELESS_EXT
> select WEXT_PRIV
> select FW_LOADER
> - ---help---
> + help
> This option adds the Realtek RTL8712 USB device such as the D-Link DWA-130.
> If built as a module, it will be called r8712u.
>
> config R8712_TX_AGGR
> bool "Realtek RTL8712U Transmit Aggregation code"
> depends on R8712U && BROKEN
> - ---help---
> + help
> This option provides transmit aggregation for the Realtek RTL8712 USB device.
>
>
> diff --git a/drivers/staging/rtl8723bs/Kconfig b/drivers/staging/rtl8723bs/Kconfig
> index deae0427ba6c..41ad6ed24860 100644
> --- a/drivers/staging/rtl8723bs/Kconfig
> +++ b/drivers/staging/rtl8723bs/Kconfig
> @@ -4,7 +4,7 @@ config RTL8723BS
> depends on m
> select WIRELESS_EXT
> select WEXT_PRIV
> - ---help---
> + help
> This option enables support for RTL8723BS SDIO drivers, such as
> the wifi found on the 1st gen Intel Compute Stick, the CHIP
> and many other Intel Atom and ARM based devices.
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-04-20 17:00 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-04-20 11:37 [PATCH] staging: rtl8*: use help instead of ---help--- in Kconfig MosesChristopher
2019-04-20 17:00 ` Larry Finger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).