[PATCH 0/3] implement poweroff for mt6323/6397

[PATCH 0/3] implement poweroff for mt6323/6397

[Frank Wunderlich]

i got this Patchset from josef friedl and want got get it in mainline

tested on bananapi-r2 (mt7623)

with this Patchset real power off (in mailine only "system halted") and
reboot by power-key is working

Josef Friedl (3):
  add doc and MAINTAINERS for poweroff
  add dts for poweroff
  add driver and MAINTAINERS for poweroff

 .../devicetree/bindings/mfd/mt6397.txt        |  10 +-
 .../bindings/power/reset/mt6323-poweroff.txt  |  20 ++++
 .../devicetree/bindings/rtc/rtc-mt6397.txt    |  29 +++++
 MAINTAINERS                                   |   7 ++
 arch/arm/boot/dts/mt6323.dtsi                 |  27 +++++
 drivers/mfd/mt6397-core.c                     |  40 +++++--
 drivers/power/reset/Kconfig                   |  10 ++
 drivers/power/reset/Makefile                  |   1 +
 drivers/power/reset/mt6323-poweroff.c         |  97 +++++++++++++++
 drivers/rtc/rtc-mt6397.c                      | 110 ++++--------------
 include/linux/mfd/mt6397/core.h               |   2 +
 include/linux/mfd/mt6397/rtc.h                |  71 +++++++++++
 12 files changed, 325 insertions(+), 99 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
 create mode 100644 drivers/power/reset/mt6323-poweroff.c
 create mode 100644 include/linux/mfd/mt6397/rtc.h

--
2.17.1

[PATCH 1/3] add doc and MAINTAINERS for poweroff

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

poweroff for BPI-R2
Suggested-by: Frank Wunderlich <frank-w@public-files.de>

Signed-off-by: Josef Friedl <josef.friedl@speed.at>
---
 .../devicetree/bindings/mfd/mt6397.txt        | 10 ++++++-
 .../bindings/power/reset/mt6323-poweroff.txt  | 20 +++++++++++++
 .../devicetree/bindings/rtc/rtc-mt6397.txt    | 29 +++++++++++++++++++
 MAINTAINERS                                   |  6 ++++
 4 files changed, 64 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt6397.txt

diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index 0ebd08af777d..44acb9827716 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -8,6 +8,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
 - Clock
 - LED
 - Keys
+- Power controller

 It is interfaced to host controller using SPI interface by a proprietary hardware
 called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
@@ -22,8 +23,10 @@ compatible: "mediatek,mt6397" or "mediatek,mt6323"
 Optional subnodes:

 - rtc
-	Required properties:
+	Required properties: Should be one of follows
+		- compatible: "mediatek,mt6323-rtc"
 		- compatible: "mediatek,mt6397-rtc"
+	For details, see Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
 - regulators
 	Required properties:
 		- compatible: "mediatek,mt6397-regulator"
@@ -46,6 +49,11 @@ Optional subnodes:
 		- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
 	see Documentation/devicetree/bindings/input/mtk-pmic-keys.txt

+- power-controller
+	Required properties:
+		- compatible: "mediatek,mt6323-pwrc"
+	For details, see Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
+
 Example:
 	pwrap: pwrap@1000f000 {
 		compatible = "mediatek,mt8135-pwrap";
diff --git a/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
new file mode 100644
index 000000000000..933f0c48e887
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
@@ -0,0 +1,20 @@
+Device Tree Bindings for Power Controller on MediaTek PMIC
+
+The power controller which could be found on PMIC is responsible for externally
+powering off or on the remote MediaTek SoC through the circuit BBPU.
+
+Required properties:
+- compatible: Should be one of follows
+       "mediatek,mt6323-pwrc": for MT6323 PMIC
+
+Example:
+
+       pmic {
+               compatible = "mediatek,mt6323";
+
+               ...
+
+               power-controller {
+                       compatible = "mediatek,mt6323-pwrc";
+               };
+       }
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
new file mode 100644
index 000000000000..ebd1cf80dcc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
@@ -0,0 +1,29 @@
+Device-Tree bindings for MediaTek PMIC based RTC
+
+MediaTek PMIC based RTC is an independent function of MediaTek PMIC that works
+as a type of multi-function device (MFD). The RTC can be configured and set up
+with PMIC wrapper bus which is a common resource shared with the other
+functions found on the same PMIC.
+
+For MediaTek PMIC MFD bindings, see:
+Documentation/devicetree/bindings/mfd/mt6397.txt
+
+For MediaTek PMIC wrapper bus bindings, see:
+Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+
+Required properties:
+- compatible: Should be one of follows
+       "mediatek,mt6323-rtc": for MT6323 PMIC
+       "mediatek,mt6397-rtc": for MT6397 PMIC
+
+Example:
+
+       pmic {
+               compatible = "mediatek,mt6323";
+
+               ...
+
+               rtc {
+                       compatible = "mediatek,mt6323-rtc";
+               };
+       };
diff --git a/MAINTAINERS b/MAINTAINERS
index 01a52fc964da..ec6ff342aa3c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9920,6 +9920,12 @@ S:	Maintained
 F:	drivers/net/dsa/mt7530.*
 F:	net/dsa/tag_mtk.c

+MEDIATEK BOARD LEVEL SHUTDOWN DRIVERS
+M:	Sean Wang <sean.wang@mediatek.com>
+L:	linux-pm@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
+
 MEDIATEK JPEG DRIVER
 M:	Rick Chang <rick.chang@mediatek.com>
 M:	Bin Liu <bin.liu@mediatek.com>
--
2.17.1

Re: [PATCH 1/3] add doc and MAINTAINERS for poweroff

[Ryder Lee]

+Sean

On Tue, 2019-07-02 at 11:40 +0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> poweroff for BPI-R2
> Suggested-by: Frank Wunderlich <frank-w@public-files.de>
> 
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> ---
>  .../devicetree/bindings/mfd/mt6397.txt        | 10 ++++++-
>  .../bindings/power/reset/mt6323-poweroff.txt  | 20 +++++++++++++
>  .../devicetree/bindings/rtc/rtc-mt6397.txt    | 29 +++++++++++++++++++
>  MAINTAINERS                                   |  6 ++++
>  4 files changed, 64 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
>  create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
> index 0ebd08af777d..44acb9827716 100644
> --- a/Documentation/devicetree/bindings/mfd/mt6397.txt
> +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
> @@ -8,6 +8,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
>  - Clock
>  - LED
>  - Keys
> +- Power controller
> 
>  It is interfaced to host controller using SPI interface by a proprietary hardware
>  called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
> @@ -22,8 +23,10 @@ compatible: "mediatek,mt6397" or "mediatek,mt6323"
>  Optional subnodes:
> 
>  - rtc
> -	Required properties:
> +	Required properties: Should be one of follows
> +		- compatible: "mediatek,mt6323-rtc"
>  		- compatible: "mediatek,mt6397-rtc"
> +	For details, see Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
>  - regulators
>  	Required properties:
>  		- compatible: "mediatek,mt6397-regulator"
> @@ -46,6 +49,11 @@ Optional subnodes:
>  		- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
>  	see Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> 
> +- power-controller
> +	Required properties:
> +		- compatible: "mediatek,mt6323-pwrc"
> +	For details, see Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
> +
>  Example:
>  	pwrap: pwrap@1000f000 {
>  		compatible = "mediatek,mt8135-pwrap";
> diff --git a/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
> new file mode 100644
> index 000000000000..933f0c48e887
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
> @@ -0,0 +1,20 @@
> +Device Tree Bindings for Power Controller on MediaTek PMIC
> +
> +The power controller which could be found on PMIC is responsible for externally
> +powering off or on the remote MediaTek SoC through the circuit BBPU.
> +
> +Required properties:
> +- compatible: Should be one of follows
> +       "mediatek,mt6323-pwrc": for MT6323 PMIC
> +
> +Example:
> +
> +       pmic {
> +               compatible = "mediatek,mt6323";
> +
> +               ...
> +
> +               power-controller {
> +                       compatible = "mediatek,mt6323-pwrc";
> +               };
> +       }
> diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
> new file mode 100644
> index 000000000000..ebd1cf80dcc8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
> @@ -0,0 +1,29 @@
> +Device-Tree bindings for MediaTek PMIC based RTC
> +
> +MediaTek PMIC based RTC is an independent function of MediaTek PMIC that works
> +as a type of multi-function device (MFD). The RTC can be configured and set up
> +with PMIC wrapper bus which is a common resource shared with the other
> +functions found on the same PMIC.
> +
> +For MediaTek PMIC MFD bindings, see:
> +Documentation/devicetree/bindings/mfd/mt6397.txt
> +
> +For MediaTek PMIC wrapper bus bindings, see:
> +Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
> +
> +Required properties:
> +- compatible: Should be one of follows
> +       "mediatek,mt6323-rtc": for MT6323 PMIC
> +       "mediatek,mt6397-rtc": for MT6397 PMIC
> +
> +Example:
> +
> +       pmic {
> +               compatible = "mediatek,mt6323";
> +
> +               ...
> +
> +               rtc {
> +                       compatible = "mediatek,mt6323-rtc";
> +               };
> +       };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 01a52fc964da..ec6ff342aa3c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -9920,6 +9920,12 @@ S:	Maintained
>  F:	drivers/net/dsa/mt7530.*
>  F:	net/dsa/tag_mtk.c
> 
> +MEDIATEK BOARD LEVEL SHUTDOWN DRIVERS
> +M:	Sean Wang <sean.wang@mediatek.com>
> +L:	linux-pm@vger.kernel.org
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt

It's odd that there's no Sean's SOB tag in the series but add him in the
entry.

>  MEDIATEK JPEG DRIVER
>  M:	Rick Chang <rick.chang@mediatek.com>
>  M:	Bin Liu <bin.liu@mediatek.com>
> --
> 2.17.1
> 
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 1/3] add doc and MAINTAINERS for poweroff

[Andrew Lunn]

On Tue, Jul 02, 2019 at 11:40:43AM +0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> poweroff for BPI-R2
> Suggested-by: Frank Wunderlich <frank-w@public-files.de>
> 
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>

Hi Frank

This needs you own Signed-off-by as well. Anybody who touches the
patch, passes it upwards on the submitter/maintainer chain needs to
add there own SOB.

     Andrew

Re: [PATCH 1/3] add doc and MAINTAINERS for poweroff

[Matthias Brugger]

On 02/07/2019 11:40, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> poweroff for BPI-R2
> Suggested-by: Frank Wunderlich <frank-w@public-files.de>
> 
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> =2D--

Please provide a proper commit message. Also subject should be adjusted. Just
have a look into the git log to see what prefix you should use.

What's =2D-- ?


>  .../devicetree/bindings/mfd/mt6397.txt        | 10 ++++++-
>  .../bindings/power/reset/mt6323-poweroff.txt  | 20 +++++++++++++
>  .../devicetree/bindings/rtc/rtc-mt6397.txt    | 29 +++++++++++++++++++
>  MAINTAINERS                                   |  6 ++++
>  4 files changed, 64 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/power/reset/mt6323-p=
> oweroff.txt
>  create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentat=
> ion/devicetree/bindings/mfd/mt6397.txt
> index 0ebd08af777d..44acb9827716 100644
> =2D-- a/Documentation/devicetree/bindings/mfd/mt6397.txt
> +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
> @@ -8,6 +8,7 @@ MT6397/MT6323 is a multifunction device with the following=
>  sub modules:
>  - Clock
>  - LED
>  - Keys
> +- Power controller
> 
>  It is interfaced to host controller using SPI interface by a proprietary =
> hardware
>  called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwra=
> p.

It seems you have some problems with enconding or word wrapping by your email
setting. please check that.

> @@ -22,8 +23,10 @@ compatible: "mediatek,mt6397" or "mediatek,mt6323"
>  Optional subnodes:
> 
>  - rtc
> -	Required properties:
> +	Required properties: Should be one of follows
> +		- compatible: "mediatek,mt6323-rtc"
>  		- compatible: "mediatek,mt6397-rtc"
> +	For details, see Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
>  - regulators
>  	Required properties:
>  		- compatible: "mediatek,mt6397-regulator"
> @@ -46,6 +49,11 @@ Optional subnodes:
>  		- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
>  	see Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
> 
> +- power-controller
> +	Required properties:
> +		- compatible: "mediatek,mt6323-pwrc"
> +	For details, see Documentation/devicetree/bindings/power/reset/mt6323-po=
> weroff.txt
> +
>  Example:
>  	pwrap: pwrap@1000f000 {
>  		compatible =3D "mediatek,mt8135-pwrap";
> diff --git a/Documentation/devicetree/bindings/power/reset/mt6323-poweroff=
> .txt b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
> new file mode 100644
> index 000000000000..933f0c48e887
> =2D-- /dev/null
> +++ b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
> @@ -0,0 +1,20 @@
> +Device Tree Bindings for Power Controller on MediaTek PMIC
> +
> +The power controller which could be found on PMIC is responsible for exte=
> rnally
> +powering off or on the remote MediaTek SoC through the circuit BBPU.
> +
> +Required properties:
> +- compatible: Should be one of follows
> +       "mediatek,mt6323-pwrc": for MT6323 PMIC
> +
> +Example:
> +
> +       pmic {
> +               compatible =3D "mediatek,mt6323";
> +
> +               ...
> +
> +               power-controller {
> +                       compatible =3D "mediatek,mt6323-pwrc";
> +               };
> +       }
> diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt b/Docume=
> ntation/devicetree/bindings/rtc/rtc-mt6397.txt
> new file mode 100644
> index 000000000000..ebd1cf80dcc8
> =2D-- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
> @@ -0,0 +1,29 @@
> +Device-Tree bindings for MediaTek PMIC based RTC
> +
> +MediaTek PMIC based RTC is an independent function of MediaTek PMIC that =
> works
> +as a type of multi-function device (MFD). The RTC can be configured and s=
> et up
> +with PMIC wrapper bus which is a common resource shared with the other
> +functions found on the same PMIC.
> +
> +For MediaTek PMIC MFD bindings, see:
> +Documentation/devicetree/bindings/mfd/mt6397.txt
> +
> +For MediaTek PMIC wrapper bus bindings, see:
> +Documentation/devicetree/bindings/soc/mediatek/pwrap.txt

In the end there is no difference between the mt6397 rtc and the mt7622-rtc,
right? Please rename the binding document of mt7622 and add the compatible
there. No need to add a new file.

> +
> +Required properties:
> +- compatible: Should be one of follows
> +       "mediatek,mt6323-rtc": for MT6323 PMIC
> +       "mediatek,mt6397-rtc": for MT6397 PMIC
> +
> +Example:
> +
> +       pmic {
> +               compatible =3D "mediatek,mt6323";
> +
> +               ...
> +
> +               rtc {
> +                       compatible =3D "mediatek,mt6323-rtc";
> +               };
> +       };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 01a52fc964da..ec6ff342aa3c 100644
> =2D-- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -9920,6 +9920,12 @@ S:	Maintained
>  F:	drivers/net/dsa/mt7530.*
>  F:	net/dsa/tag_mtk.c
> 
> +MEDIATEK BOARD LEVEL SHUTDOWN DRIVERS
> +M:	Sean Wang <sean.wang@mediatek.com>
> +L:	linux-pm@vger.kernel.org
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
> +
>  MEDIATEK JPEG DRIVER
>  M:	Rick Chang <rick.chang@mediatek.com>
>  M:	Bin Liu <bin.liu@mediatek.com>
> =2D-
> 2.17.1

Maintainers entries are normally a seperate patch.

Regards,
Matthias

> 

[PATCH 2/3] add dts for poweroff

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

poweroff for BPI-R2
Suggested-by: Frank Wunderlich <frank-w@public-files.de>

Signed-off-by: Josef Friedl <josef.friedl@speed.at>
---
 arch/arm/boot/dts/mt6323.dtsi | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mt6323.dtsi
index ba397407c1dd..7fda40ab5fe8 100644
--- a/arch/arm/boot/dts/mt6323.dtsi
+++ b/arch/arm/boot/dts/mt6323.dtsi
@@ -238,5 +238,32 @@
 				regulator-enable-ramp-delay = <216>;
 			};
 		};
+
+		mt6323keys: mt6323keys {
+			compatible = "mediatek,mt6323-keys";
+			mediatek,long-press-mode = <1>;
+			power-off-time-sec = <0>;
+
+			power {
+				linux,keycodes = <116>;
+				wakeup-source;
+			};
+
+			home {
+				linux,keycodes = <114>;
+			};
+		};
+
+		codec: mt6397codec {
+			compatible = "mediatek,mt6397-codec";
+		};
+
+		power-controller {
+			compatible = "mediatek,mt6323-pwrc";
+		};
+
+		rtc {
+			compatible = "mediatek,mt6323-rtc";
+		};
 	};
 };
--
2.17.1

[PATCH 3/3] add driver and MAINTAINERS for poweroff

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

poweroff for BPI-R2
Suggested-by: Frank Wunderlich <frank-w@public-files.de>

Signed-off-by: Josef Friedl <josef.friedl@speed.at>
---
 MAINTAINERS                           |   1 +
 drivers/mfd/mt6397-core.c             |  40 +++++++---
 drivers/power/reset/Kconfig           |  10 +++
 drivers/power/reset/Makefile          |   1 +
 drivers/power/reset/mt6323-poweroff.c |  97 +++++++++++++++++++++++
 drivers/rtc/rtc-mt6397.c              | 110 ++++++--------------------
 include/linux/mfd/mt6397/core.h       |   2 +
 include/linux/mfd/mt6397/rtc.h        |  71 +++++++++++++++++
 8 files changed, 234 insertions(+), 98 deletions(-)
 create mode 100644 drivers/power/reset/mt6323-poweroff.c
 create mode 100644 include/linux/mfd/mt6397/rtc.h

diff --git a/MAINTAINERS b/MAINTAINERS
index ec6ff342aa3c..31c1e882b7d2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9925,6 +9925,7 @@ M:	Sean Wang <sean.wang@mediatek.com>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
+F:	drivers/power/reset/mt6323-poweroff.c

 MEDIATEK JPEG DRIVER
 M:	Rick Chang <rick.chang@mediatek.com>
diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index 337bcccdb914..a4abce00f156 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -1,10 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) 2014 MediaTek Inc.
+ * Copyright (c) 2014-2018 MediaTek Inc.
  * Author: Flora Fu, MediaTek
  */

 #include <linux/interrupt.h>
+#include <linux/ioport.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
@@ -15,24 +16,27 @@
 #include <linux/mfd/mt6397/registers.h>
 #include <linux/mfd/mt6323/registers.h>

+#define MT6323_RTC_BASE		0x8000
+#define MT6323_RTC_SIZE		0x40
+
 #define MT6397_RTC_BASE		0xe000
 #define MT6397_RTC_SIZE		0x3e

+#define MT6323_PWRC_BASE	0x8000
+#define MT6323_PWRC_SIZE	0x40
+
 #define MT6323_CID_CODE		0x23
 #define MT6391_CID_CODE		0x91
 #define MT6397_CID_CODE		0x97

+static const struct resource mt6323_rtc_resources[] = {
+	DEFINE_RES_MEM(MT6323_RTC_BASE, MT6323_RTC_SIZE),
+	DEFINE_RES_IRQ(MT6323_IRQ_STATUS_RTC),
+};
+
 static const struct resource mt6397_rtc_resources[] = {
-	{
-		.start = MT6397_RTC_BASE,
-		.end   = MT6397_RTC_BASE + MT6397_RTC_SIZE,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = MT6397_IRQ_RTC,
-		.end   = MT6397_IRQ_RTC,
-		.flags = IORESOURCE_IRQ,
-	},
+	DEFINE_RES_MEM(MT6397_RTC_BASE, MT6397_RTC_SIZE),
+	DEFINE_RES_IRQ(MT6397_IRQ_RTC),
 };

 static const struct resource mt6323_keys_resources[] = {
@@ -45,8 +49,17 @@ static const struct resource mt6397_keys_resources[] = {
 	DEFINE_RES_IRQ(MT6397_IRQ_HOMEKEY),
 };

+static const struct resource mt6323_pwrc_resources[] = {
+	DEFINE_RES_MEM(MT6323_PWRC_BASE, MT6323_PWRC_SIZE),
+};
+
 static const struct mfd_cell mt6323_devs[] = {
 	{
+		.name = "mt6323-rtc",
+		.num_resources = ARRAY_SIZE(mt6323_rtc_resources),
+		.resources = mt6323_rtc_resources,
+		.of_compatible = "mediatek,mt6323-rtc",
+	}, {
 		.name = "mt6323-regulator",
 		.of_compatible = "mediatek,mt6323-regulator"
 	}, {
@@ -57,6 +70,11 @@ static const struct mfd_cell mt6323_devs[] = {
 		.num_resources = ARRAY_SIZE(mt6323_keys_resources),
 		.resources = mt6323_keys_resources,
 		.of_compatible = "mediatek,mt6323-keys"
+	}, {
+		.name = "mt6323-pwrc",
+		.num_resources = ARRAY_SIZE(mt6323_pwrc_resources),
+		.resources = mt6323_pwrc_resources,
+		.of_compatible = "mediatek,mt6323-pwrc"
 	},
 };

diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 980951dff834..492678e22088 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -140,6 +140,16 @@ config POWER_RESET_LTC2952
 	  This driver supports an external powerdown trigger and board power
 	  down via the LTC2952. Bindings are made in the device tree.

+config POWER_RESET_MT6323
+       bool "MediaTek MT6323 power-off driver"
+       depends on MFD_MT6397
+       help
+         The power-off driver is responsible for externally shutdown down
+         the power of a remote MediaTek SoC MT6323 is connected to through
+         controlling a tiny circuit BBPU inside MT6323 RTC.
+
+         Say Y if you have a board where MT6323 could be found.
+
 config POWER_RESET_QNAP
 	bool "QNAP power-off driver"
 	depends on OF_GPIO && PLAT_ORION
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 0aebee954ac1..94eaceb01d66 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
 obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
 obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
 obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
+obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o
 obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
 obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
 obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
diff --git a/drivers/power/reset/mt6323-poweroff.c b/drivers/power/reset/mt6323-poweroff.c
new file mode 100644
index 000000000000..1caf43d9e46d
--- /dev/null
+++ b/drivers/power/reset/mt6323-poweroff.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Power off through MediaTek PMIC
+ *
+ * Copyright (C) 2018 MediaTek Inc.
+ *
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/mfd/mt6397/rtc.h>
+
+struct mt6323_pwrc {
+	struct device *dev;
+	struct regmap *regmap;
+	u32 base;
+};
+
+static struct mt6323_pwrc *mt_pwrc;
+
+static void mt6323_do_pwroff(void)
+{
+	struct mt6323_pwrc *pwrc = mt_pwrc;
+	unsigned int val;
+	int ret;
+
+	regmap_write(pwrc->regmap, pwrc->base + RTC_BBPU, RTC_BBPU_KEY);
+	regmap_write(pwrc->regmap, pwrc->base + RTC_WRTGR, 1);
+
+	ret = regmap_read_poll_timeout(pwrc->regmap,
+					pwrc->base + RTC_BBPU, val,
+					!(val & RTC_BBPU_CBUSY),
+					MTK_RTC_POLL_DELAY_US,
+					MTK_RTC_POLL_TIMEOUT);
+	if (ret)
+		dev_err(pwrc->dev, "failed to write BBPU: %d\n", ret);
+
+	/* Wait some time until system down, otherwise, notice with a warn */
+	mdelay(1000);
+
+	WARN_ONCE(1, "Unable to power off system\n");
+}
+
+static int mt6323_pwrc_probe(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6397_chip = dev_get_drvdata(pdev->dev.parent);
+	struct mt6323_pwrc *pwrc;
+	struct resource *res;
+
+	pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL);
+	if (!pwrc)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pwrc->base = res->start;
+	pwrc->regmap = mt6397_chip->regmap;
+	pwrc->dev = &pdev->dev;
+	mt_pwrc = pwrc;
+
+	pm_power_off = &mt6323_do_pwroff;
+
+	return 0;
+}
+
+static int mt6323_pwrc_remove(struct platform_device *pdev)
+{
+	if (pm_power_off == &mt6323_do_pwroff)
+		pm_power_off = NULL;
+
+	return 0;
+}
+
+static const struct of_device_id mt6323_pwrc_dt_match[] = {
+	{ .compatible = "mediatek,mt6323-pwrc" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mt6323_pwrc_dt_match);
+
+static struct platform_driver mt6323_pwrc_driver = {
+	.probe          = mt6323_pwrc_probe,
+	.remove         = mt6323_pwrc_remove,
+	.driver         = {
+		.name   = "mt6323-pwrc",
+		.of_match_table = mt6323_pwrc_dt_match,
+	},
+};
+
+module_platform_driver(mt6323_pwrc_driver);
+
+MODULE_DESCRIPTION("Poweroff driver for MT6323 PMIC");
+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index b46ed4dc7015..e5ddf0d0b6f1 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -4,69 +4,19 @@
 * Author: Tianping.Fang <tianping.fang@mediatek.com>
 */

-#include <linux/delay.h>
-#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/mt6397/core.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/rtc.h>
-#include <linux/irqdomain.h>
-#include <linux/platform_device.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/io.h>
-#include <linux/mfd/mt6397/core.h>
-
-#define RTC_BBPU		0x0000
-#define RTC_BBPU_CBUSY		BIT(6)
-
-#define RTC_WRTGR		0x003c
-
-#define RTC_IRQ_STA		0x0002
-#define RTC_IRQ_STA_AL		BIT(0)
-#define RTC_IRQ_STA_LP		BIT(3)
-
-#define RTC_IRQ_EN		0x0004
-#define RTC_IRQ_EN_AL		BIT(0)
-#define RTC_IRQ_EN_ONESHOT	BIT(2)
-#define RTC_IRQ_EN_LP		BIT(3)
-#define RTC_IRQ_EN_ONESHOT_AL	(RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
-
-#define RTC_AL_MASK		0x0008
-#define RTC_AL_MASK_DOW		BIT(4)
-
-#define RTC_TC_SEC		0x000a
-/* Min, Hour, Dom... register offset to RTC_TC_SEC */
-#define RTC_OFFSET_SEC		0
-#define RTC_OFFSET_MIN		1
-#define RTC_OFFSET_HOUR		2
-#define RTC_OFFSET_DOM		3
-#define RTC_OFFSET_DOW		4
-#define RTC_OFFSET_MTH		5
-#define RTC_OFFSET_YEAR		6
-#define RTC_OFFSET_COUNT	7
-
-#define RTC_AL_SEC		0x0018
-
-#define RTC_PDN2		0x002e
-#define RTC_PDN2_PWRON_ALARM	BIT(4)
-
-#define RTC_MIN_YEAR		1968
-#define RTC_BASE_YEAR		1900
-#define RTC_NUM_YEARS		128
-#define RTC_MIN_YEAR_OFFSET	(RTC_MIN_YEAR - RTC_BASE_YEAR)
-
-struct mt6397_rtc {
-	struct device		*dev;
-	struct rtc_device	*rtc_dev;
-	struct mutex		lock;
-	struct regmap		*regmap;
-	int			irq;
-	u32			addr_base;
-};
+#include <linux/mfd/mt6397/rtc.h>
+#include <linux/mod_devicetable.h>

 static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
 {
-	unsigned long timeout = jiffies + HZ;
 	int ret;
 	u32 data;

@@ -74,19 +24,13 @@ static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
 	if (ret < 0)
 		return ret;

-	while (1) {
-		ret = regmap_read(rtc->regmap, rtc->addr_base + RTC_BBPU,
-				  &data);
-		if (ret < 0)
-			break;
-		if (!(data & RTC_BBPU_CBUSY))
-			break;
-		if (time_after(jiffies, timeout)) {
-			ret = -ETIMEDOUT;
-			break;
-		}
-		cpu_relax();
-	}
+	ret = regmap_read_poll_timeout(rtc->regmap,
+					rtc->addr_base + RTC_BBPU, data,
+					!(data & RTC_BBPU_CBUSY),
+					MTK_RTC_POLL_DELAY_US,
+					MTK_RTC_POLL_TIMEOUT);
+	if (ret < 0)
+		dev_err(rtc->dev, "failed to write WRTGE: %d\n", ret);

 	return ret;
 }
@@ -324,14 +268,11 @@ static int mtk_rtc_probe(struct platform_device *pdev)

 	platform_set_drvdata(pdev, rtc);

-	rtc->rtc_dev = devm_rtc_allocate_device(rtc->dev);
-	if (IS_ERR(rtc->rtc_dev))
-		return PTR_ERR(rtc->rtc_dev);
+	ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
+					mtk_rtc_irq_handler_thread,
+					IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+					"mt6397-rtc", rtc);

-	ret = request_threaded_irq(rtc->irq, NULL,
-				   mtk_rtc_irq_handler_thread,
-				   IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
-				   "mt6397-rtc", rtc);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
 			rtc->irq, ret);
@@ -340,6 +281,10 @@ static int mtk_rtc_probe(struct platform_device *pdev)

 	device_init_wakeup(&pdev->dev, 1);

+	rtc->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(rtc->rtc_dev))
+		return PTR_ERR(rtc->rtc_dev);
+
 	rtc->rtc_dev->ops = &mtk_rtc_ops;

 	ret = rtc_register_device(rtc->rtc_dev);
@@ -355,15 +300,6 @@ static int mtk_rtc_probe(struct platform_device *pdev)
 	return ret;
 }

-static int mtk_rtc_remove(struct platform_device *pdev)
-{
-	struct mt6397_rtc *rtc = platform_get_drvdata(pdev);
-
-	free_irq(rtc->irq, rtc);
-
-	return 0;
-}
-
 #ifdef CONFIG_PM_SLEEP
 static int mt6397_rtc_suspend(struct device *dev)
 {
@@ -390,6 +326,7 @@ static SIMPLE_DEV_PM_OPS(mt6397_pm_ops, mt6397_rtc_suspend,
 			mt6397_rtc_resume);

 static const struct of_device_id mt6397_rtc_of_match[] = {
+	{ .compatible = "mediatek,mt6323-rtc", },
 	{ .compatible = "mediatek,mt6397-rtc", },
 	{ }
 };
@@ -402,7 +339,6 @@ static struct platform_driver mtk_rtc_driver = {
 		.pm = &mt6397_pm_ops,
 	},
 	.probe	= mtk_rtc_probe,
-	.remove = mtk_rtc_remove,
 };

 module_platform_driver(mtk_rtc_driver);
diff --git a/include/linux/mfd/mt6397/core.h b/include/linux/mfd/mt6397/core.h
index 25a95e72179b..652da61e3711 100644
--- a/include/linux/mfd/mt6397/core.h
+++ b/include/linux/mfd/mt6397/core.h
@@ -7,6 +7,8 @@
 #ifndef __MFD_MT6397_CORE_H__
 #define __MFD_MT6397_CORE_H__

+#include <linux/mutex.h>
+
 enum mt6397_irq_numbers {
 	MT6397_IRQ_SPKL_AB = 0,
 	MT6397_IRQ_SPKR_AB,
diff --git a/include/linux/mfd/mt6397/rtc.h b/include/linux/mfd/mt6397/rtc.h
new file mode 100644
index 000000000000..b702c29e8c74
--- /dev/null
+++ b/include/linux/mfd/mt6397/rtc.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2014-2018 MediaTek Inc.
+ *
+ * Author: Tianping.Fang <tianping.fang@mediatek.com>
+ *        Sean Wang <sean.wang@mediatek.com>
+ */
+
+#ifndef _LINUX_MFD_MT6397_RTC_H_
+#define _LINUX_MFD_MT6397_RTC_H_
+
+#include <linux/jiffies.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+
+#define RTC_BBPU               0x0000
+#define RTC_BBPU_CBUSY         BIT(6)
+#define RTC_BBPU_KEY            (0x43 << 8)
+
+#define RTC_WRTGR              0x003c
+
+#define RTC_IRQ_STA            0x0002
+#define RTC_IRQ_STA_AL         BIT(0)
+#define RTC_IRQ_STA_LP         BIT(3)
+
+#define RTC_IRQ_EN             0x0004
+#define RTC_IRQ_EN_AL          BIT(0)
+#define RTC_IRQ_EN_ONESHOT     BIT(2)
+#define RTC_IRQ_EN_LP          BIT(3)
+#define RTC_IRQ_EN_ONESHOT_AL  (RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
+
+#define RTC_AL_MASK            0x0008
+#define RTC_AL_MASK_DOW                BIT(4)
+
+#define RTC_TC_SEC             0x000a
+/* Min, Hour, Dom... register offset to RTC_TC_SEC */
+#define RTC_OFFSET_SEC         0
+#define RTC_OFFSET_MIN         1
+#define RTC_OFFSET_HOUR                2
+#define RTC_OFFSET_DOM         3
+#define RTC_OFFSET_DOW         4
+#define RTC_OFFSET_MTH         5
+#define RTC_OFFSET_YEAR                6
+#define RTC_OFFSET_COUNT       7
+
+#define RTC_AL_SEC             0x0018
+
+#define RTC_PDN2               0x002e
+#define RTC_PDN2_PWRON_ALARM   BIT(4)
+
+#define RTC_MIN_YEAR           1968
+#define RTC_BASE_YEAR          1900
+#define RTC_NUM_YEARS          128
+#define RTC_MIN_YEAR_OFFSET    (RTC_MIN_YEAR - RTC_BASE_YEAR)
+
+#define MTK_RTC_POLL_DELAY_US  10
+#define MTK_RTC_POLL_TIMEOUT   (jiffies_to_usecs(HZ))
+
+struct mt6397_rtc {
+	struct device           *dev;
+	struct rtc_device       *rtc_dev;
+
+	/* Protect register access from multiple tasks */
+	struct mutex            lock;
+	struct regmap           *regmap;
+	int                     irq;
+	u32                     addr_base;
+};
+
+#endif /* _LINUX_MFD_MT6397_RTC_H_ */
--
2.17.1

Re: [PATCH 3/3] add driver and MAINTAINERS for poweroff

[Matthias Brugger]

On 02/07/2019 11:40, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> poweroff for BPI-R2
> Suggested-by: Frank Wunderlich <frank-w@public-files.de>
> 
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>

Fix the commit message. MAINTAINERS get normally send a independent patch.
Split patches between RTC and PWRC.

> =2D--
>  MAINTAINERS                           |   1 +
>  drivers/mfd/mt6397-core.c             |  40 +++++++---
>  drivers/power/reset/Kconfig           |  10 +++
>  drivers/power/reset/Makefile          |   1 +
>  drivers/power/reset/mt6323-poweroff.c |  97 +++++++++++++++++++++++
>  drivers/rtc/rtc-mt6397.c              | 110 ++++++--------------------
>  include/linux/mfd/mt6397/core.h       |   2 +
>  include/linux/mfd/mt6397/rtc.h        |  71 +++++++++++++++++
>  8 files changed, 234 insertions(+), 98 deletions(-)
>  create mode 100644 drivers/power/reset/mt6323-poweroff.c
>  create mode 100644 include/linux/mfd/mt6397/rtc.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index ec6ff342aa3c..31c1e882b7d2 100644
> =2D-- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -9925,6 +9925,7 @@ M:	Sean Wang <sean.wang@mediatek.com>
>  L:	linux-pm@vger.kernel.org
>  S:	Maintained
>  F:	Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
> +F:	drivers/power/reset/mt6323-poweroff.c
> 
>  MEDIATEK JPEG DRIVER
>  M:	Rick Chang <rick.chang@mediatek.com>
> diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
> index 337bcccdb914..a4abce00f156 100644
> =2D-- a/drivers/mfd/mt6397-core.c
> +++ b/drivers/mfd/mt6397-core.c
> @@ -1,10 +1,11 @@
>  // SPDX-License-Identifier: GPL-2.0-only
>  /*
> - * Copyright (c) 2014 MediaTek Inc.
> + * Copyright (c) 2014-2018 MediaTek Inc.
>   * Author: Flora Fu, MediaTek
>   */
> 
>  #include <linux/interrupt.h>
> +#include <linux/ioport.h>
>  #include <linux/module.h>
>  #include <linux/of_device.h>
>  #include <linux/of_irq.h>
> @@ -15,24 +16,27 @@
>  #include <linux/mfd/mt6397/registers.h>
>  #include <linux/mfd/mt6323/registers.h>
> 
> +#define MT6323_RTC_BASE		0x8000
> +#define MT6323_RTC_SIZE		0x40
> +
>  #define MT6397_RTC_BASE		0xe000
>  #define MT6397_RTC_SIZE		0x3e
> 
> +#define MT6323_PWRC_BASE	0x8000
> +#define MT6323_PWRC_SIZE	0x40
> +
>  #define MT6323_CID_CODE		0x23
>  #define MT6391_CID_CODE		0x91
>  #define MT6397_CID_CODE		0x97
> 
> +static const struct resource mt6323_rtc_resources[] =3D {
> +	DEFINE_RES_MEM(MT6323_RTC_BASE, MT6323_RTC_SIZE),
> +	DEFINE_RES_IRQ(MT6323_IRQ_STATUS_RTC),
> +};
> +
>  static const struct resource mt6397_rtc_resources[] =3D {
> -	{
> -		.start =3D MT6397_RTC_BASE,
> -		.end   =3D MT6397_RTC_BASE + MT6397_RTC_SIZE,
> -		.flags =3D IORESOURCE_MEM,
> -	},
> -	{
> -		.start =3D MT6397_IRQ_RTC,
> -		.end   =3D MT6397_IRQ_RTC,
> -		.flags =3D IORESOURCE_IRQ,
> -	},
> +	DEFINE_RES_MEM(MT6397_RTC_BASE, MT6397_RTC_SIZE),
> +	DEFINE_RES_IRQ(MT6397_IRQ_RTC),

If not a new patch it should be stated in the commit message at least.

>  };
> 
>  static const struct resource mt6323_keys_resources[] =3D {
> @@ -45,8 +49,17 @@ static const struct resource mt6397_keys_resources[] =
> =3D {
>  	DEFINE_RES_IRQ(MT6397_IRQ_HOMEKEY),
>  };
> 
> +static const struct resource mt6323_pwrc_resources[] =3D {
> +	DEFINE_RES_MEM(MT6323_PWRC_BASE, MT6323_PWRC_SIZE),
> +};
> +
>  static const struct mfd_cell mt6323_devs[] =3D {
>  	{
> +		.name =3D "mt6323-rtc",
> +		.num_resources =3D ARRAY_SIZE(mt6323_rtc_resources),
> +		.resources =3D mt6323_rtc_resources,
> +		.of_compatible =3D "mediatek,mt6323-rtc",
> +	}, {
>  		.name =3D "mt6323-regulator",
>  		.of_compatible =3D "mediatek,mt6323-regulator"
>  	}, {
> @@ -57,6 +70,11 @@ static const struct mfd_cell mt6323_devs[] =3D {
>  		.num_resources =3D ARRAY_SIZE(mt6323_keys_resources),
>  		.resources =3D mt6323_keys_resources,
>  		.of_compatible =3D "mediatek,mt6323-keys"
> +	}, {
> +		.name =3D "mt6323-pwrc",
> +		.num_resources =3D ARRAY_SIZE(mt6323_pwrc_resources),
> +		.resources =3D mt6323_pwrc_resources,
> +		.of_compatible =3D "mediatek,mt6323-pwrc"
>  	},
>  };
> 
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index 980951dff834..492678e22088 100644
> =2D-- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -140,6 +140,16 @@ config POWER_RESET_LTC2952
>  	  This driver supports an external powerdown trigger and board power
>  	  down via the LTC2952. Bindings are made in the device tree.
> 
> +config POWER_RESET_MT6323
> +       bool "MediaTek MT6323 power-off driver"
> +       depends on MFD_MT6397
> +       help
> +         The power-off driver is responsible for externally shutdown down
> +         the power of a remote MediaTek SoC MT6323 is connected to throug=
> h
> +         controlling a tiny circuit BBPU inside MT6323 RTC.
> +
> +         Say Y if you have a board where MT6323 could be found.
> +
>  config POWER_RESET_QNAP
>  	bool "QNAP power-off driver"
>  	depends on OF_GPIO && PLAT_ORION
> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> index 0aebee954ac1..94eaceb01d66 100644
> =2D-- a/drivers/power/reset/Makefile
> +++ b/drivers/power/reset/Makefile
> @@ -11,6 +11,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) +=3D gpio-poweroff.o
>  obj-$(CONFIG_POWER_RESET_GPIO_RESTART) +=3D gpio-restart.o
>  obj-$(CONFIG_POWER_RESET_HISI) +=3D hisi-reboot.o
>  obj-$(CONFIG_POWER_RESET_MSM) +=3D msm-poweroff.o
> +obj-$(CONFIG_POWER_RESET_MT6323) +=3D mt6323-poweroff.o
>  obj-$(CONFIG_POWER_RESET_QCOM_PON) +=3D qcom-pon.o
>  obj-$(CONFIG_POWER_RESET_OCELOT_RESET) +=3D ocelot-reset.o
>  obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) +=3D piix4-poweroff.o
> diff --git a/drivers/power/reset/mt6323-poweroff.c b/drivers/power/reset/m=
> t6323-poweroff.c
> new file mode 100644
> index 000000000000..1caf43d9e46d
> =2D-- /dev/null
> +++ b/drivers/power/reset/mt6323-poweroff.c
> @@ -0,0 +1,97 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Power off through MediaTek PMIC
> + *
> + * Copyright (C) 2018 MediaTek Inc.
> + *
> + * Author: Sean Wang <sean.wang@mediatek.com>
> + *
> + */
> +
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/mfd/mt6397/core.h>
> +#include <linux/mfd/mt6397/rtc.h>
> +
> +struct mt6323_pwrc {
> +	struct device *dev;
> +	struct regmap *regmap;
> +	u32 base;
> +};
> +
> +static struct mt6323_pwrc *mt_pwrc;
> +
> +static void mt6323_do_pwroff(void)
> +{
> +	struct mt6323_pwrc *pwrc =3D mt_pwrc;
> +	unsigned int val;
> +	int ret;
> +
> +	regmap_write(pwrc->regmap, pwrc->base + RTC_BBPU, RTC_BBPU_KEY);
> +	regmap_write(pwrc->regmap, pwrc->base + RTC_WRTGR, 1);
> +
> +	ret =3D regmap_read_poll_timeout(pwrc->regmap,
> +					pwrc->base + RTC_BBPU, val,
> +					!(val & RTC_BBPU_CBUSY),
> +					MTK_RTC_POLL_DELAY_US,
> +					MTK_RTC_POLL_TIMEOUT);
> +	if (ret)
> +		dev_err(pwrc->dev, "failed to write BBPU: %d\n", ret);
> +
> +	/* Wait some time until system down, otherwise, notice with a warn */
> +	mdelay(1000);
> +
> +	WARN_ONCE(1, "Unable to power off system\n");
> +}
> +
> +static int mt6323_pwrc_probe(struct platform_device *pdev)
> +{
> +	struct mt6397_chip *mt6397_chip =3D dev_get_drvdata(pdev->dev.parent);
> +	struct mt6323_pwrc *pwrc;
> +	struct resource *res;
> +
> +	pwrc =3D devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL);
> +	if (!pwrc)
> +		return -ENOMEM;
> +
> +	res =3D platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	pwrc->base =3D res->start;
> +	pwrc->regmap =3D mt6397_chip->regmap;
> +	pwrc->dev =3D &pdev->dev;
> +	mt_pwrc =3D pwrc;
> +
> +	pm_power_off =3D &mt6323_do_pwroff;
> +
> +	return 0;
> +}
> +
> +static int mt6323_pwrc_remove(struct platform_device *pdev)
> +{
> +	if (pm_power_off =3D=3D &mt6323_do_pwroff)
> +		pm_power_off =3D NULL;
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id mt6323_pwrc_dt_match[] =3D {
> +	{ .compatible =3D "mediatek,mt6323-pwrc" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, mt6323_pwrc_dt_match);
> +
> +static struct platform_driver mt6323_pwrc_driver =3D {
> +	.probe          =3D mt6323_pwrc_probe,
> +	.remove         =3D mt6323_pwrc_remove,
> +	.driver         =3D {
> +		.name   =3D "mt6323-pwrc",
> +		.of_match_table =3D mt6323_pwrc_dt_match,
> +	},
> +};
> +
> +module_platform_driver(mt6323_pwrc_driver);
> +
> +MODULE_DESCRIPTION("Poweroff driver for MT6323 PMIC");
> +MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
> index b46ed4dc7015..e5ddf0d0b6f1 100644
> =2D-- a/drivers/rtc/rtc-mt6397.c
> +++ b/drivers/rtc/rtc-mt6397.c
> @@ -4,69 +4,19 @@
>  * Author: Tianping.Fang <tianping.fang@mediatek.com>
>  */
> 
> -#include <linux/delay.h>
> -#include <linux/init.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/mt6397/core.h>
>  #include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
>  #include <linux/regmap.h>
>  #include <linux/rtc.h>
> -#include <linux/irqdomain.h>
> -#include <linux/platform_device.h>
> -#include <linux/of_address.h>
> -#include <linux/of_irq.h>
> -#include <linux/io.h>
> -#include <linux/mfd/mt6397/core.h>
> -
> -#define RTC_BBPU		0x0000
> -#define RTC_BBPU_CBUSY		BIT(6)
> -
> -#define RTC_WRTGR		0x003c
> -
> -#define RTC_IRQ_STA		0x0002
> -#define RTC_IRQ_STA_AL		BIT(0)
> -#define RTC_IRQ_STA_LP		BIT(3)
> -
> -#define RTC_IRQ_EN		0x0004
> -#define RTC_IRQ_EN_AL		BIT(0)
> -#define RTC_IRQ_EN_ONESHOT	BIT(2)
> -#define RTC_IRQ_EN_LP		BIT(3)
> -#define RTC_IRQ_EN_ONESHOT_AL	(RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
> -
> -#define RTC_AL_MASK		0x0008
> -#define RTC_AL_MASK_DOW		BIT(4)
> -
> -#define RTC_TC_SEC		0x000a
> -/* Min, Hour, Dom... register offset to RTC_TC_SEC */
> -#define RTC_OFFSET_SEC		0
> -#define RTC_OFFSET_MIN		1
> -#define RTC_OFFSET_HOUR		2
> -#define RTC_OFFSET_DOM		3
> -#define RTC_OFFSET_DOW		4
> -#define RTC_OFFSET_MTH		5
> -#define RTC_OFFSET_YEAR		6
> -#define RTC_OFFSET_COUNT	7
> -
> -#define RTC_AL_SEC		0x0018
> -
> -#define RTC_PDN2		0x002e
> -#define RTC_PDN2_PWRON_ALARM	BIT(4)
> -
> -#define RTC_MIN_YEAR		1968
> -#define RTC_BASE_YEAR		1900
> -#define RTC_NUM_YEARS		128
> -#define RTC_MIN_YEAR_OFFSET	(RTC_MIN_YEAR - RTC_BASE_YEAR)
> -
> -struct mt6397_rtc {
> -	struct device		*dev;
> -	struct rtc_device	*rtc_dev;
> -	struct mutex		lock;
> -	struct regmap		*regmap;
> -	int			irq;
> -	u32			addr_base;
> -};
> +#include <linux/mfd/mt6397/rtc.h>
> +#include <linux/mod_devicetable.h>
> 
>  static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
>  {
> -	unsigned long timeout =3D jiffies + HZ;
>  	int ret;
>  	u32 data;
> 
> @@ -74,19 +24,13 @@ static int mtk_rtc_write_trigger(struct mt6397_rtc *rt=
> c)
>  	if (ret < 0)
>  		return ret;
> 
> -	while (1) {
> -		ret =3D regmap_read(rtc->regmap, rtc->addr_base + RTC_BBPU,
> -				  &data);
> -		if (ret < 0)
> -			break;
> -		if (!(data & RTC_BBPU_CBUSY))
> -			break;
> -		if (time_after(jiffies, timeout)) {
> -			ret =3D -ETIMEDOUT;
> -			break;
> -		}
> -		cpu_relax();
> -	}
> +	ret =3D regmap_read_poll_timeout(rtc->regmap,
> +					rtc->addr_base + RTC_BBPU, data,
> +					!(data & RTC_BBPU_CBUSY),
> +					MTK_RTC_POLL_DELAY_US,
> +					MTK_RTC_POLL_TIMEOUT);
> +	if (ret < 0)
> +		dev_err(rtc->dev, "failed to write WRTGE: %d\n", ret);

write? this is a read of RTC_BBPU not WRTGE.

> 
>  	return ret;
>  }
> @@ -324,14 +268,11 @@ static int mtk_rtc_probe(struct platform_device *pde=
> v)
> 
>  	platform_set_drvdata(pdev, rtc);
> 
> -	rtc->rtc_dev =3D devm_rtc_allocate_device(rtc->dev);
> -	if (IS_ERR(rtc->rtc_dev))
> -		return PTR_ERR(rtc->rtc_dev);
> +	ret =3D devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
> +					mtk_rtc_irq_handler_thread,
> +					IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
> +					"mt6397-rtc", rtc);
> 
> -	ret =3D request_threaded_irq(rtc->irq, NULL,
> -				   mtk_rtc_irq_handler_thread,
> -				   IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
> -				   "mt6397-rtc", rtc);
>  	if (ret) {
>  		dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
>  			rtc->irq, ret);
> @@ -340,6 +281,10 @@ static int mtk_rtc_probe(struct platform_device *pdev=
> )
> 
>  	device_init_wakeup(&pdev->dev, 1);
> 
> +	rtc->rtc_dev =3D devm_rtc_allocate_device(&pdev->dev);
> +	if (IS_ERR(rtc->rtc_dev))
> +		return PTR_ERR(rtc->rtc_dev);
> +
>  	rtc->rtc_dev->ops =3D &mtk_rtc_ops;
> 
>  	ret =3D rtc_register_device(rtc->rtc_dev);
> @@ -355,15 +300,6 @@ static int mtk_rtc_probe(struct platform_device *pdev=
> )
>  	return ret;
>  }
> 
> -static int mtk_rtc_remove(struct platform_device *pdev)
> -{
> -	struct mt6397_rtc *rtc =3D platform_get_drvdata(pdev);
> -
> -	free_irq(rtc->irq, rtc);
> -
> -	return 0;
> -}
> -

I think the use of devm irq allocation should go into an independent patch.

>  #ifdef CONFIG_PM_SLEEP
>  static int mt6397_rtc_suspend(struct device *dev)
>  {
> @@ -390,6 +326,7 @@ static SIMPLE_DEV_PM_OPS(mt6397_pm_ops, mt6397_rtc_sus=
> pend,
>  			mt6397_rtc_resume);
> 
>  static const struct of_device_id mt6397_rtc_of_match[] =3D {
> +	{ .compatible =3D "mediatek,mt6323-rtc", },
>  	{ .compatible =3D "mediatek,mt6397-rtc", },
>  	{ }
>  };
> @@ -402,7 +339,6 @@ static struct platform_driver mtk_rtc_driver =3D {
>  		.pm =3D &mt6397_pm_ops,
>  	},
>  	.probe	=3D mtk_rtc_probe,
> -	.remove =3D mtk_rtc_remove,
>  };
> 
>  module_platform_driver(mtk_rtc_driver);
> diff --git a/include/linux/mfd/mt6397/core.h b/include/linux/mfd/mt6397/co=
> re.h
> index 25a95e72179b..652da61e3711 100644
> =2D-- a/include/linux/mfd/mt6397/core.h
> +++ b/include/linux/mfd/mt6397/core.h
> @@ -7,6 +7,8 @@
>  #ifndef __MFD_MT6397_CORE_H__
>  #define __MFD_MT6397_CORE_H__
> 
> +#include <linux/mutex.h>
> +
>  enum mt6397_irq_numbers {
>  	MT6397_IRQ_SPKL_AB =3D 0,
>  	MT6397_IRQ_SPKR_AB,
> diff --git a/include/linux/mfd/mt6397/rtc.h b/include/linux/mfd/mt6397/rtc=
> .h
> new file mode 100644
> index 000000000000..b702c29e8c74
> =2D-- /dev/null
> +++ b/include/linux/mfd/mt6397/rtc.h
> @@ -0,0 +1,71 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2014-2018 MediaTek Inc.
> + *
> + * Author: Tianping.Fang <tianping.fang@mediatek.com>
> + *        Sean Wang <sean.wang@mediatek.com>

You are the author of this file, aren't you?
Regards,
Matthias

> + */
> +
> +#ifndef _LINUX_MFD_MT6397_RTC_H_
> +#define _LINUX_MFD_MT6397_RTC_H_
> +
> +#include <linux/jiffies.h>
> +#include <linux/mutex.h>
> +#include <linux/regmap.h>
> +#include <linux/rtc.h>
> +
> +#define RTC_BBPU               0x0000
> +#define RTC_BBPU_CBUSY         BIT(6)
> +#define RTC_BBPU_KEY            (0x43 << 8)
> +
> +#define RTC_WRTGR              0x003c
> +
> +#define RTC_IRQ_STA            0x0002
> +#define RTC_IRQ_STA_AL         BIT(0)
> +#define RTC_IRQ_STA_LP         BIT(3)
> +
> +#define RTC_IRQ_EN             0x0004
> +#define RTC_IRQ_EN_AL          BIT(0)
> +#define RTC_IRQ_EN_ONESHOT     BIT(2)
> +#define RTC_IRQ_EN_LP          BIT(3)
> +#define RTC_IRQ_EN_ONESHOT_AL  (RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
> +
> +#define RTC_AL_MASK            0x0008
> +#define RTC_AL_MASK_DOW                BIT(4)
> +
> +#define RTC_TC_SEC             0x000a
> +/* Min, Hour, Dom... register offset to RTC_TC_SEC */
> +#define RTC_OFFSET_SEC         0
> +#define RTC_OFFSET_MIN         1
> +#define RTC_OFFSET_HOUR                2
> +#define RTC_OFFSET_DOM         3
> +#define RTC_OFFSET_DOW         4
> +#define RTC_OFFSET_MTH         5
> +#define RTC_OFFSET_YEAR                6
> +#define RTC_OFFSET_COUNT       7
> +
> +#define RTC_AL_SEC             0x0018
> +
> +#define RTC_PDN2               0x002e
> +#define RTC_PDN2_PWRON_ALARM   BIT(4)
> +
> +#define RTC_MIN_YEAR           1968
> +#define RTC_BASE_YEAR          1900
> +#define RTC_NUM_YEARS          128
> +#define RTC_MIN_YEAR_OFFSET    (RTC_MIN_YEAR - RTC_BASE_YEAR)
> +
> +#define MTK_RTC_POLL_DELAY_US  10
> +#define MTK_RTC_POLL_TIMEOUT   (jiffies_to_usecs(HZ))
> +
> +struct mt6397_rtc {
> +	struct device           *dev;
> +	struct rtc_device       *rtc_dev;
> +
> +	/* Protect register access from multiple tasks */
> +	struct mutex            lock;
> +	struct regmap           *regmap;
> +	int                     irq;
> +	u32                     addr_base;
> +};
> +
> +#endif /* _LINUX_MFD_MT6397_RTC_H_ */
> =2D-
> 2.17.1
> 

Aw: Re: [PATCH 3/3] add driver and MAINTAINERS for poweroff

[Frank Wunderlich]

Hi Mathias

thank you for first look on this. Patchseries is originally from Josef Friedl i got some time ago for getting poweroff working on bananapi r2. There it works and maybe on another devices too.

drivers/rtc/rtc-mt6397.c and drivers/rtc/rtc-mt7622.c look very differently on a diff (you've commented in part 1/3)

maybe code is compatible but i have not the knowledge to compare this...maybe sean (sorry, that i missed you) or ryder can say a word about the compatibility.

> Fix the commit message. MAINTAINERS get normally send a independent patch.
> Split patches between RTC and PWRC.
> If not a new patch it should be stated in the commit message at least.

i will try to split this

> > + * Author: Tianping.Fang <tianping.fang@mediatek.com>
> > + *        Sean Wang <sean.wang@mediatek.com>
>
> You are the author of this file, aren't you?

no, afaik these is code taken from rtc-mt6397.c and put in a separate header-file to use it in multiple c-files.

sidenote on encoding/word-wrap. i use only "git sendemail" which afaik calls sendmail (no other mta like thunderbird or similar) on ubuntu 18.4....curently have no idea how to fix this...have searched before, but not yet found anything. if you have an idea please give me a hint.

regards Frank

Re: Aw: Re: [PATCH 3/3] add driver and MAINTAINERS for poweroff

[Matthias Brugger]

On 03/07/2019 10:51, Frank Wunderlich wrote:
> Hi Mathias
> 
> thank you for first look on this. Patchseries is originally from Josef Friedl i got some time ago for getting poweroff working on bananapi r2. There it works and maybe on another devices too.
> 
> drivers/rtc/rtc-mt6397.c and drivers/rtc/rtc-mt7622.c look very differently on a diff (you've commented in part 1/3)
> 
> maybe code is compatible but i have not the knowledge to compare this...maybe sean (sorry, that i missed you) or ryder can say a word about the compatibility.
> 

My fault, I didn't got that right. So you are just improving the code of the RTC
driver. Which is great, but as already said, do this in a separate patch. :)

Regards,
Matthias

>> Fix the commit message. MAINTAINERS get normally send a independent patch.
>> Split patches between RTC and PWRC.
>> If not a new patch it should be stated in the commit message at least.
> 
> i will try to split this
> 
>>> + * Author: Tianping.Fang <tianping.fang@mediatek.com>
>>> + *        Sean Wang <sean.wang@mediatek.com>
>>
>> You are the author of this file, aren't you?
> 
> no, afaik these is code taken from rtc-mt6397.c and put in a separate header-file to use it in multiple c-files.
> 
> sidenote on encoding/word-wrap. i use only "git sendemail" which afaik calls sendmail (no other mta like thunderbird or similar) on ubuntu 18.4....curently have no idea how to fix this...have searched before, but not yet found anything. if you have an idea please give me a hint.
> 
> regards Frank
>