[PATCH v2 0/2] regulator: axp20x: Fix bugs for AXP803/6

[PATCH v2 0/2] regulator: axp20x: Fix bugs for AXP803/6

[Jernej Skrabec]

Driver refactoring caused few bugs and most of them are already fixed.
However, some are still present, namely in AXP806 and AXP803 regulator
definitions.

This short patch series fix them.

Please take a look.

Best regards,
Jernej

Changes from v1:
- Expanded commit message
- Added fix for AXP803 DCDC5

Jernej Skrabec (2):
  regulator: axp20x: fix DCDCA and DCDCD for AXP806
  regulator: axp20x: fix DCDC5 and DCDC6 for AXP803

 drivers/regulator/axp20x-regulator.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

-- 
2.22.0

[PATCH v2 1/2] regulator: axp20x: fix DCDCA and DCDCD for AXP806

[Jernej Skrabec]

Refactoring of the driver introduced bugs in AXP806's DCDCA and DCDCD
regulator definitions.

In DCDCA case, AXP806_DCDCA_1120mV_STEPS was obtained by subtracting
0x47 and 0x33. This should be 0x14 (hex) and not 14 (dec).

In DCDCD case, axp806_dcdcd_ranges[] contains two ranges with same
start and end macros, which is clearly wrong. Second range starts at
1.6V so it should use AXP806_DCDCD_1600mV_[START|END] macros. They are
already defined but unused.

Fixes: db4a555f7c4c ("regulator: axp20x: use defines for masks")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/regulator/axp20x-regulator.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 152053361862..c951568994a1 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -240,7 +240,7 @@
 #define AXP806_DCDCA_600mV_END		\
 	(AXP806_DCDCA_600mV_START + AXP806_DCDCA_600mV_STEPS)
 #define AXP806_DCDCA_1120mV_START	0x33
-#define AXP806_DCDCA_1120mV_STEPS	14
+#define AXP806_DCDCA_1120mV_STEPS	20
 #define AXP806_DCDCA_1120mV_END		\
 	(AXP806_DCDCA_1120mV_START + AXP806_DCDCA_1120mV_STEPS)
 #define AXP806_DCDCA_NUM_VOLTAGES	72
@@ -774,8 +774,8 @@ static const struct regulator_linear_range axp806_dcdcd_ranges[] = {
 			       AXP806_DCDCD_600mV_END,
 			       20000),
 	REGULATOR_LINEAR_RANGE(1600000,
-			       AXP806_DCDCD_600mV_START,
-			       AXP806_DCDCD_600mV_END,
+			       AXP806_DCDCD_1600mV_START,
+			       AXP806_DCDCD_1600mV_END,
 			       100000),
 };
 
-- 
2.22.0

[PATCH v2 2/2] regulator: axp20x: fix DCDC5 and DCDC6 for AXP803

[Jernej Skrabec]

Refactoring of axp20x driver introduced a bug in AXP803's DCDC6
regulator definition. AXP803_DCDC6_1120mV_STEPS was obtained by
subtracting 0x47 and 0x33. This should be 0x14 (hex) and not 14
(dec).

Refactoring also carried over a bug in DCDC5 regulator definition.
Number of possible voltages must be for 1 bigger than maximum valid
voltage index, because 0 is also valid and it means lowest voltage.

Fixes: 1dbe0ccb0631 ("regulator: axp20x-regulator: add support for AXP803")
Fixes: db4a555f7c4c ("regulator: axp20x: use defines for masks")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
 drivers/regulator/axp20x-regulator.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index c951568994a1..989506bd90b1 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -174,14 +174,14 @@
 #define AXP803_DCDC5_1140mV_STEPS	35
 #define AXP803_DCDC5_1140mV_END		\
 	(AXP803_DCDC5_1140mV_START + AXP803_DCDC5_1140mV_STEPS)
-#define AXP803_DCDC5_NUM_VOLTAGES	68
+#define AXP803_DCDC5_NUM_VOLTAGES	69
 
 #define AXP803_DCDC6_600mV_START	0x00
 #define AXP803_DCDC6_600mV_STEPS	50
 #define AXP803_DCDC6_600mV_END		\
 	(AXP803_DCDC6_600mV_START + AXP803_DCDC6_600mV_STEPS)
 #define AXP803_DCDC6_1120mV_START	0x33
-#define AXP803_DCDC6_1120mV_STEPS	14
+#define AXP803_DCDC6_1120mV_STEPS	20
 #define AXP803_DCDC6_1120mV_END		\
 	(AXP803_DCDC6_1120mV_START + AXP803_DCDC6_1120mV_STEPS)
 #define AXP803_DCDC6_NUM_VOLTAGES	72
-- 
2.22.0

Applied "regulator: axp20x: fix DCDC5 and DCDC6 for AXP803" to the regulator tree

[Mark Brown]

The patch

   regulator: axp20x: fix DCDC5 and DCDC6 for AXP803

has been applied to the regulator tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.3

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 8f46e22b5ac692b48d04bb722547ca17b66dda02 Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@siol.net>
Date: Sat, 13 Jul 2019 11:07:17 +0200
Subject: [PATCH] regulator: axp20x: fix DCDC5 and DCDC6 for AXP803

Refactoring of axp20x driver introduced a bug in AXP803's DCDC6
regulator definition. AXP803_DCDC6_1120mV_STEPS was obtained by
subtracting 0x47 and 0x33. This should be 0x14 (hex) and not 14
(dec).

Refactoring also carried over a bug in DCDC5 regulator definition.
Number of possible voltages must be for 1 bigger than maximum valid
voltage index, because 0 is also valid and it means lowest voltage.

Fixes: 1dbe0ccb0631 ("regulator: axp20x-regulator: add support for AXP803")
Fixes: db4a555f7c4c ("regulator: axp20x: use defines for masks")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20190713090717.347-3-jernej.skrabec@siol.net
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/axp20x-regulator.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index c951568994a1..989506bd90b1 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -174,14 +174,14 @@
 #define AXP803_DCDC5_1140mV_STEPS	35
 #define AXP803_DCDC5_1140mV_END		\
 	(AXP803_DCDC5_1140mV_START + AXP803_DCDC5_1140mV_STEPS)
-#define AXP803_DCDC5_NUM_VOLTAGES	68
+#define AXP803_DCDC5_NUM_VOLTAGES	69
 
 #define AXP803_DCDC6_600mV_START	0x00
 #define AXP803_DCDC6_600mV_STEPS	50
 #define AXP803_DCDC6_600mV_END		\
 	(AXP803_DCDC6_600mV_START + AXP803_DCDC6_600mV_STEPS)
 #define AXP803_DCDC6_1120mV_START	0x33
-#define AXP803_DCDC6_1120mV_STEPS	14
+#define AXP803_DCDC6_1120mV_STEPS	20
 #define AXP803_DCDC6_1120mV_END		\
 	(AXP803_DCDC6_1120mV_START + AXP803_DCDC6_1120mV_STEPS)
 #define AXP803_DCDC6_NUM_VOLTAGES	72
-- 
2.20.1

Applied "regulator: axp20x: fix DCDCA and DCDCD for AXP806" to the regulator tree

[Mark Brown]

The patch

   regulator: axp20x: fix DCDCA and DCDCD for AXP806

has been applied to the regulator tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.3

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 1ef55fed9219963359a7b3bc7edca8517c6e45ac Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@siol.net>
Date: Sat, 13 Jul 2019 11:07:16 +0200
Subject: [PATCH] regulator: axp20x: fix DCDCA and DCDCD for AXP806

Refactoring of the driver introduced bugs in AXP806's DCDCA and DCDCD
regulator definitions.

In DCDCA case, AXP806_DCDCA_1120mV_STEPS was obtained by subtracting
0x47 and 0x33. This should be 0x14 (hex) and not 14 (dec).

In DCDCD case, axp806_dcdcd_ranges[] contains two ranges with same
start and end macros, which is clearly wrong. Second range starts at
1.6V so it should use AXP806_DCDCD_1600mV_[START|END] macros. They are
already defined but unused.

Fixes: db4a555f7c4c ("regulator: axp20x: use defines for masks")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://lore.kernel.org/r/20190713090717.347-2-jernej.skrabec@siol.net
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/regulator/axp20x-regulator.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 152053361862..c951568994a1 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -240,7 +240,7 @@
 #define AXP806_DCDCA_600mV_END		\
 	(AXP806_DCDCA_600mV_START + AXP806_DCDCA_600mV_STEPS)
 #define AXP806_DCDCA_1120mV_START	0x33
-#define AXP806_DCDCA_1120mV_STEPS	14
+#define AXP806_DCDCA_1120mV_STEPS	20
 #define AXP806_DCDCA_1120mV_END		\
 	(AXP806_DCDCA_1120mV_START + AXP806_DCDCA_1120mV_STEPS)
 #define AXP806_DCDCA_NUM_VOLTAGES	72
@@ -774,8 +774,8 @@ static const struct regulator_linear_range axp806_dcdcd_ranges[] = {
 			       AXP806_DCDCD_600mV_END,
 			       20000),
 	REGULATOR_LINEAR_RANGE(1600000,
-			       AXP806_DCDCD_600mV_START,
-			       AXP806_DCDCD_600mV_END,
+			       AXP806_DCDCD_1600mV_START,
+			       AXP806_DCDCD_1600mV_END,
 			       100000),
 };
 
-- 
2.20.1