[PATCH 4.19 00/32] 4.19.64-stable review

[PATCH 4.19 00/32] 4.19.64-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.19.64 release.
There are 32 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun 04 Aug 2019 09:19:34 AM UTC.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.64-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.19.64-rc1

Bart Van Assche <bvanassche@acm.org>
    scsi: core: Avoid that a kernel warning appears during system resume

Bart Van Assche <bvanassche@acm.org>
    block, scsi: Change the preempt-only flag into a counter

Yan, Zheng <zyan@redhat.com>
    ceph: hold i_ceph_lock when removing caps for freeing inode

Yoshinori Sato <ysato@users.sourceforge.jp>
    Fix allyesconfig output.

Miroslav Lichvar <mlichvar@redhat.com>
    drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl

Linus Torvalds <torvalds@linux-foundation.org>
    /proc/<pid>/cmdline: add back the setproctitle() special case

Linus Torvalds <torvalds@linux-foundation.org>
    /proc/<pid>/cmdline: remove all the special cases

Jann Horn <jannh@google.com>
    sched/fair: Use RCU accessors consistently for ->numa_group

Jann Horn <jannh@google.com>
    sched/fair: Don't free p->numa_faults with concurrent readers

Jason Wang <jasowang@redhat.com>
    vhost: scsi: add weight support

Jason Wang <jasowang@redhat.com>
    vhost: vsock: add weight support

Jason Wang <jasowang@redhat.com>
    vhost_net: fix possible infinite loop

Jason Wang <jasowang@redhat.com>
    vhost: introduce vhost_exceeds_weight()

Vladis Dronov <vdronov@redhat.com>
    Bluetooth: hci_uart: check for missing tty operations

Joerg Roedel <jroedel@suse.de>
    iommu/iova: Fix compilation error with !CONFIG_IOMMU_IOVA

Dmitry Safonov <dima@arista.com>
    iommu/vt-d: Don't queue_iova() if there is no flush queue

Luke Nowakowski-Krijger <lnowakow@eng.ucsd.edu>
    media: radio-raremono: change devm_k*alloc to k*alloc

Benjamin Coddington <bcodding@redhat.com>
    NFS: Cleanup if nfs_match_client is interrupted

Andrey Konovalov <andreyknvl@google.com>
    media: pvrusb2: use a different format for warnings

Oliver Neukum <oneukum@suse.com>
    media: cpia2_usb: first wake up, then free in disconnect

Fabio Estevam <festevam@gmail.com>
    ath10k: Change the warning message string

Sean Young <sean@mess.org>
    media: au0828: fix null dereference in error path

Phong Tran <tranmanphong@gmail.com>
    ISDN: hfcsusb: checking idx of ep configuration

Todd Kjos <tkjos@android.com>
    binder: fix possible UAF when freeing buffer

Will Deacon <will.deacon@arm.com>
    arm64: compat: Provide definition for COMPAT_SIGMINSTKSZ

Minas Harutyunyan <minas.harutyunyan@synopsys.com>
    usb: dwc2: Fix disable all EP's on disconnect

Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
    usb: dwc2: Disable all EP's on disconnect

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv4: Fix lookup revalidate of regular files

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFS: Refactor nfs_lookup_revalidate()

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFS: Fix dentry revalidation on NFSv4 lookup

Sunil Muthuswamy <sunilmut@microsoft.com>
    vsock: correct removal of socket from the list

Sunil Muthuswamy <sunilmut@microsoft.com>
    hv_sock: Add support for delayed close


-------------

Diffstat:

 Makefile                                     |   4 +-
 arch/arm64/include/asm/compat.h              |   1 +
 arch/sh/boards/Kconfig                       |  14 +-
 block/blk-core.c                             |  35 ++--
 block/blk-mq-debugfs.c                       |  10 +-
 drivers/android/binder.c                     |  16 +-
 drivers/bluetooth/hci_ath.c                  |   3 +
 drivers/bluetooth/hci_bcm.c                  |   3 +
 drivers/bluetooth/hci_intel.c                |   3 +
 drivers/bluetooth/hci_ldisc.c                |  13 ++
 drivers/bluetooth/hci_mrvl.c                 |   3 +
 drivers/bluetooth/hci_qca.c                  |   3 +
 drivers/bluetooth/hci_uart.h                 |   1 +
 drivers/iommu/intel-iommu.c                  |   2 +-
 drivers/iommu/iova.c                         |  18 +-
 drivers/isdn/hardware/mISDN/hfcsusb.c        |   3 +
 drivers/media/radio/radio-raremono.c         |  30 ++-
 drivers/media/usb/au0828/au0828-core.c       |  12 +-
 drivers/media/usb/cpia2/cpia2_usb.c          |   3 +-
 drivers/media/usb/pvrusb2/pvrusb2-hdw.c      |   4 +-
 drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c |   6 +-
 drivers/media/usb/pvrusb2/pvrusb2-std.c      |   2 +-
 drivers/net/wireless/ath/ath10k/usb.c        |   2 +-
 drivers/pps/pps.c                            |   8 +
 drivers/scsi/scsi_lib.c                      |  15 +-
 drivers/usb/dwc2/gadget.c                    |  41 +++-
 drivers/vhost/net.c                          |  41 ++--
 drivers/vhost/scsi.c                         |  15 +-
 drivers/vhost/vhost.c                        |  20 +-
 drivers/vhost/vhost.h                        |   5 +-
 drivers/vhost/vsock.c                        |  28 ++-
 fs/ceph/caps.c                               |   7 +-
 fs/exec.c                                    |   2 +-
 fs/nfs/client.c                              |   4 +-
 fs/nfs/dir.c                                 | 295 +++++++++++++++------------
 fs/nfs/nfs4proc.c                            |  15 +-
 fs/proc/base.c                               | 132 ++++++------
 include/linux/blkdev.h                       |  14 +-
 include/linux/iova.h                         |   6 +
 include/linux/sched.h                        |  10 +-
 include/linux/sched/numa_balancing.h         |   4 +-
 kernel/fork.c                                |   2 +-
 kernel/sched/fair.c                          | 144 +++++++++----
 net/vmw_vsock/af_vsock.c                     |  38 +---
 net/vmw_vsock/hyperv_transport.c             | 108 +++++++---
 45 files changed, 719 insertions(+), 426 deletions(-)

[PATCH 4.19 01/32] hv_sock: Add support for delayed close

[Greg Kroah-Hartman]

From: Sunil Muthuswamy <sunilmut@microsoft.com>

commit a9eeb998c28d5506616426bd3a216bd5735a18b8 upstream.

Currently, hvsock does not implement any delayed or background close
logic. Whenever the hvsock socket is closed, a FIN is sent to the peer, and
the last reference to the socket is dropped, which leads to a call to
.destruct where the socket can hang indefinitely waiting for the peer to
close it's side. The can cause the user application to hang in the close()
call.

This change implements proper STREAM(TCP) closing handshake mechanism by
sending the FIN to the peer and the waiting for the peer's FIN to arrive
for a given timeout. On timeout, it will try to terminate the connection
(i.e. a RST). This is in-line with other socket providers such as virtio.

This change does not address the hang in the vmbus_hvsock_device_unregister
where it waits indefinitely for the host to rescind the channel. That
should be taken up as a separate fix.

Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/vmw_vsock/hyperv_transport.c |  110 +++++++++++++++++++++++++++------------
 1 file changed, 78 insertions(+), 32 deletions(-)

--- a/net/vmw_vsock/hyperv_transport.c
+++ b/net/vmw_vsock/hyperv_transport.c
@@ -35,6 +35,9 @@
 /* The MTU is 16KB per the host side's design */
 #define HVS_MTU_SIZE		(1024 * 16)
 
+/* How long to wait for graceful shutdown of a connection */
+#define HVS_CLOSE_TIMEOUT (8 * HZ)
+
 struct vmpipe_proto_header {
 	u32 pkt_type;
 	u32 data_size;
@@ -290,19 +293,32 @@ static void hvs_channel_cb(void *ctx)
 		sk->sk_write_space(sk);
 }
 
-static void hvs_close_connection(struct vmbus_channel *chan)
+static void hvs_do_close_lock_held(struct vsock_sock *vsk,
+				   bool cancel_timeout)
 {
-	struct sock *sk = get_per_channel_state(chan);
-	struct vsock_sock *vsk = vsock_sk(sk);
-
-	lock_sock(sk);
+	struct sock *sk = sk_vsock(vsk);
 
-	sk->sk_state = TCP_CLOSE;
 	sock_set_flag(sk, SOCK_DONE);
-	vsk->peer_shutdown |= SEND_SHUTDOWN | RCV_SHUTDOWN;
-
+	vsk->peer_shutdown = SHUTDOWN_MASK;
+	if (vsock_stream_has_data(vsk) <= 0)
+		sk->sk_state = TCP_CLOSING;
 	sk->sk_state_change(sk);
+	if (vsk->close_work_scheduled &&
+	    (!cancel_timeout || cancel_delayed_work(&vsk->close_work))) {
+		vsk->close_work_scheduled = false;
+		vsock_remove_sock(vsk);
+
+		/* Release the reference taken while scheduling the timeout */
+		sock_put(sk);
+	}
+}
+
+static void hvs_close_connection(struct vmbus_channel *chan)
+{
+	struct sock *sk = get_per_channel_state(chan);
 
+	lock_sock(sk);
+	hvs_do_close_lock_held(vsock_sk(sk), true);
 	release_sock(sk);
 }
 
@@ -445,50 +461,80 @@ static int hvs_connect(struct vsock_sock
 	return vmbus_send_tl_connect_request(&h->vm_srv_id, &h->host_srv_id);
 }
 
+static void hvs_shutdown_lock_held(struct hvsock *hvs, int mode)
+{
+	struct vmpipe_proto_header hdr;
+
+	if (hvs->fin_sent || !hvs->chan)
+		return;
+
+	/* It can't fail: see hvs_channel_writable_bytes(). */
+	(void)hvs_send_data(hvs->chan, (struct hvs_send_buf *)&hdr, 0);
+	hvs->fin_sent = true;
+}
+
 static int hvs_shutdown(struct vsock_sock *vsk, int mode)
 {
 	struct sock *sk = sk_vsock(vsk);
-	struct vmpipe_proto_header hdr;
-	struct hvs_send_buf *send_buf;
-	struct hvsock *hvs;
 
 	if (!(mode & SEND_SHUTDOWN))
 		return 0;
 
 	lock_sock(sk);
-
-	hvs = vsk->trans;
-	if (hvs->fin_sent)
-		goto out;
-
-	send_buf = (struct hvs_send_buf *)&hdr;
-
-	/* It can't fail: see hvs_channel_writable_bytes(). */
-	(void)hvs_send_data(hvs->chan, send_buf, 0);
-
-	hvs->fin_sent = true;
-out:
+	hvs_shutdown_lock_held(vsk->trans, mode);
 	release_sock(sk);
 	return 0;
 }
 
-static void hvs_release(struct vsock_sock *vsk)
+static void hvs_close_timeout(struct work_struct *work)
 {
+	struct vsock_sock *vsk =
+		container_of(work, struct vsock_sock, close_work.work);
 	struct sock *sk = sk_vsock(vsk);
-	struct hvsock *hvs = vsk->trans;
-	struct vmbus_channel *chan;
 
+	sock_hold(sk);
 	lock_sock(sk);
+	if (!sock_flag(sk, SOCK_DONE))
+		hvs_do_close_lock_held(vsk, false);
 
-	sk->sk_state = TCP_CLOSING;
-	vsock_remove_sock(vsk);
-
+	vsk->close_work_scheduled = false;
 	release_sock(sk);
+	sock_put(sk);
+}
 
-	chan = hvs->chan;
-	if (chan)
-		hvs_shutdown(vsk, RCV_SHUTDOWN | SEND_SHUTDOWN);
+/* Returns true, if it is safe to remove socket; false otherwise */
+static bool hvs_close_lock_held(struct vsock_sock *vsk)
+{
+	struct sock *sk = sk_vsock(vsk);
+
+	if (!(sk->sk_state == TCP_ESTABLISHED ||
+	      sk->sk_state == TCP_CLOSING))
+		return true;
+
+	if ((sk->sk_shutdown & SHUTDOWN_MASK) != SHUTDOWN_MASK)
+		hvs_shutdown_lock_held(vsk->trans, SHUTDOWN_MASK);
+
+	if (sock_flag(sk, SOCK_DONE))
+		return true;
+
+	/* This reference will be dropped by the delayed close routine */
+	sock_hold(sk);
+	INIT_DELAYED_WORK(&vsk->close_work, hvs_close_timeout);
+	vsk->close_work_scheduled = true;
+	schedule_delayed_work(&vsk->close_work, HVS_CLOSE_TIMEOUT);
+	return false;
+}
 
+static void hvs_release(struct vsock_sock *vsk)
+{
+	struct sock *sk = sk_vsock(vsk);
+	bool remove_sock;
+
+	lock_sock(sk);
+	remove_sock = hvs_close_lock_held(vsk);
+	release_sock(sk);
+	if (remove_sock)
+		vsock_remove_sock(vsk);
 }
 
 static void hvs_destruct(struct vsock_sock *vsk)

[PATCH 4.19 02/32] vsock: correct removal of socket from the list

[Greg Kroah-Hartman]

From: Sunil Muthuswamy <sunilmut@microsoft.com>

commit d5afa82c977ea06f7119058fa0eb8519ea501031 upstream.

The current vsock code for removal of socket from the list is both
subject to race and inefficient. It takes the lock, checks whether
the socket is in the list, drops the lock and if the socket was on the
list, deletes it from the list. This is subject to race because as soon
as the lock is dropped once it is checked for presence, that condition
cannot be relied upon for any decision. It is also inefficient because
if the socket is present in the list, it takes the lock twice.

Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/vmw_vsock/af_vsock.c |   38 +++++++-------------------------------
 1 file changed, 7 insertions(+), 31 deletions(-)

--- a/net/vmw_vsock/af_vsock.c
+++ b/net/vmw_vsock/af_vsock.c
@@ -281,7 +281,8 @@ EXPORT_SYMBOL_GPL(vsock_insert_connected
 void vsock_remove_bound(struct vsock_sock *vsk)
 {
 	spin_lock_bh(&vsock_table_lock);
-	__vsock_remove_bound(vsk);
+	if (__vsock_in_bound_table(vsk))
+		__vsock_remove_bound(vsk);
 	spin_unlock_bh(&vsock_table_lock);
 }
 EXPORT_SYMBOL_GPL(vsock_remove_bound);
@@ -289,7 +290,8 @@ EXPORT_SYMBOL_GPL(vsock_remove_bound);
 void vsock_remove_connected(struct vsock_sock *vsk)
 {
 	spin_lock_bh(&vsock_table_lock);
-	__vsock_remove_connected(vsk);
+	if (__vsock_in_connected_table(vsk))
+		__vsock_remove_connected(vsk);
 	spin_unlock_bh(&vsock_table_lock);
 }
 EXPORT_SYMBOL_GPL(vsock_remove_connected);
@@ -325,35 +327,10 @@ struct sock *vsock_find_connected_socket
 }
 EXPORT_SYMBOL_GPL(vsock_find_connected_socket);
 
-static bool vsock_in_bound_table(struct vsock_sock *vsk)
-{
-	bool ret;
-
-	spin_lock_bh(&vsock_table_lock);
-	ret = __vsock_in_bound_table(vsk);
-	spin_unlock_bh(&vsock_table_lock);
-
-	return ret;
-}
-
-static bool vsock_in_connected_table(struct vsock_sock *vsk)
-{
-	bool ret;
-
-	spin_lock_bh(&vsock_table_lock);
-	ret = __vsock_in_connected_table(vsk);
-	spin_unlock_bh(&vsock_table_lock);
-
-	return ret;
-}
-
 void vsock_remove_sock(struct vsock_sock *vsk)
 {
-	if (vsock_in_bound_table(vsk))
-		vsock_remove_bound(vsk);
-
-	if (vsock_in_connected_table(vsk))
-		vsock_remove_connected(vsk);
+	vsock_remove_bound(vsk);
+	vsock_remove_connected(vsk);
 }
 EXPORT_SYMBOL_GPL(vsock_remove_sock);
 
@@ -484,8 +461,7 @@ static void vsock_pending_work(struct wo
 	 * incoming packets can't find this socket, and to reduce the reference
 	 * count.
 	 */
-	if (vsock_in_connected_table(vsk))
-		vsock_remove_connected(vsk);
+	vsock_remove_connected(vsk);
 
 	sk->sk_state = TCP_CLOSE;
 

[PATCH 4.19 03/32] NFS: Fix dentry revalidation on NFSv4 lookup

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

commit be189f7e7f03de35887e5a85ddcf39b91b5d7fc1 upstream.

We need to ensure that inode and dentry revalidation occurs correctly
on reopen of a file that is already open. Currently, we can end up
not revalidating either in the case of NFSv4.0, due to the 'cached open'
path.
Let's fix that by ensuring that we only do cached open for the special
cases of open recovery and delegation return.

Reported-by: Stan Hu <stanhu@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Qian Lu <luqia@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4proc.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -1355,12 +1355,20 @@ static bool nfs4_mode_match_open_stateid
 	return false;
 }
 
-static int can_open_cached(struct nfs4_state *state, fmode_t mode, int open_mode)
+static int can_open_cached(struct nfs4_state *state, fmode_t mode,
+		int open_mode, enum open_claim_type4 claim)
 {
 	int ret = 0;
 
 	if (open_mode & (O_EXCL|O_TRUNC))
 		goto out;
+	switch (claim) {
+	case NFS4_OPEN_CLAIM_NULL:
+	case NFS4_OPEN_CLAIM_FH:
+		goto out;
+	default:
+		break;
+	}
 	switch (mode & (FMODE_READ|FMODE_WRITE)) {
 		case FMODE_READ:
 			ret |= test_bit(NFS_O_RDONLY_STATE, &state->flags) != 0
@@ -1753,7 +1761,7 @@ static struct nfs4_state *nfs4_try_open_
 
 	for (;;) {
 		spin_lock(&state->owner->so_lock);
-		if (can_open_cached(state, fmode, open_mode)) {
+		if (can_open_cached(state, fmode, open_mode, claim)) {
 			update_open_stateflags(state, fmode);
 			spin_unlock(&state->owner->so_lock);
 			goto out_return_state;
@@ -2282,7 +2290,8 @@ static void nfs4_open_prepare(struct rpc
 	if (data->state != NULL) {
 		struct nfs_delegation *delegation;
 
-		if (can_open_cached(data->state, data->o_arg.fmode, data->o_arg.open_flags))
+		if (can_open_cached(data->state, data->o_arg.fmode,
+					data->o_arg.open_flags, claim))
 			goto out_no_action;
 		rcu_read_lock();
 		delegation = rcu_dereference(NFS_I(data->state->inode)->delegation);

[PATCH 4.19 04/32] NFS: Refactor nfs_lookup_revalidate()

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

commit 5ceb9d7fdaaf6d8ced6cd7861cf1deb9cd93fa47 upstream.

Refactor the code in nfs_lookup_revalidate() as a stepping stone towards
optimising and fixing nfs4_lookup_revalidate().

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Qian Lu <luqia@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/dir.c |  222 +++++++++++++++++++++++++++++++++--------------------------
 1 file changed, 126 insertions(+), 96 deletions(-)

--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1072,6 +1072,100 @@ int nfs_neg_need_reval(struct inode *dir
 	return !nfs_check_verifier(dir, dentry, flags & LOOKUP_RCU);
 }
 
+static int
+nfs_lookup_revalidate_done(struct inode *dir, struct dentry *dentry,
+			   struct inode *inode, int error)
+{
+	switch (error) {
+	case 1:
+		dfprintk(LOOKUPCACHE, "NFS: %s(%pd2) is valid\n",
+			__func__, dentry);
+		return 1;
+	case 0:
+		nfs_mark_for_revalidate(dir);
+		if (inode && S_ISDIR(inode->i_mode)) {
+			/* Purge readdir caches. */
+			nfs_zap_caches(inode);
+			/*
+			 * We can't d_drop the root of a disconnected tree:
+			 * its d_hash is on the s_anon list and d_drop() would hide
+			 * it from shrink_dcache_for_unmount(), leading to busy
+			 * inodes on unmount and further oopses.
+			 */
+			if (IS_ROOT(dentry))
+				return 1;
+		}
+		dfprintk(LOOKUPCACHE, "NFS: %s(%pd2) is invalid\n",
+				__func__, dentry);
+		return 0;
+	}
+	dfprintk(LOOKUPCACHE, "NFS: %s(%pd2) lookup returned error %d\n",
+				__func__, dentry, error);
+	return error;
+}
+
+static int
+nfs_lookup_revalidate_negative(struct inode *dir, struct dentry *dentry,
+			       unsigned int flags)
+{
+	int ret = 1;
+	if (nfs_neg_need_reval(dir, dentry, flags)) {
+		if (flags & LOOKUP_RCU)
+			return -ECHILD;
+		ret = 0;
+	}
+	return nfs_lookup_revalidate_done(dir, dentry, NULL, ret);
+}
+
+static int
+nfs_lookup_revalidate_delegated(struct inode *dir, struct dentry *dentry,
+				struct inode *inode)
+{
+	nfs_set_verifier(dentry, nfs_save_change_attribute(dir));
+	return nfs_lookup_revalidate_done(dir, dentry, inode, 1);
+}
+
+static int
+nfs_lookup_revalidate_dentry(struct inode *dir, struct dentry *dentry,
+			     struct inode *inode)
+{
+	struct nfs_fh *fhandle;
+	struct nfs_fattr *fattr;
+	struct nfs4_label *label;
+	int ret;
+
+	ret = -ENOMEM;
+	fhandle = nfs_alloc_fhandle();
+	fattr = nfs_alloc_fattr();
+	label = nfs4_label_alloc(NFS_SERVER(inode), GFP_KERNEL);
+	if (fhandle == NULL || fattr == NULL || IS_ERR(label))
+		goto out;
+
+	ret = NFS_PROTO(dir)->lookup(dir, &dentry->d_name, fhandle, fattr, label);
+	if (ret < 0) {
+		if (ret == -ESTALE || ret == -ENOENT)
+			ret = 0;
+		goto out;
+	}
+	ret = 0;
+	if (nfs_compare_fh(NFS_FH(inode), fhandle))
+		goto out;
+	if (nfs_refresh_inode(inode, fattr) < 0)
+		goto out;
+
+	nfs_setsecurity(inode, fattr, label);
+	nfs_set_verifier(dentry, nfs_save_change_attribute(dir));
+
+	/* set a readdirplus hint that we had a cache miss */
+	nfs_force_use_readdirplus(dir);
+	ret = 1;
+out:
+	nfs_free_fattr(fattr);
+	nfs_free_fhandle(fhandle);
+	nfs4_label_free(label);
+	return nfs_lookup_revalidate_done(dir, dentry, inode, ret);
+}
+
 /*
  * This is called every time the dcache has a lookup hit,
  * and we should check whether we can really trust that
@@ -1083,58 +1177,36 @@ int nfs_neg_need_reval(struct inode *dir
  * If the parent directory is seen to have changed, we throw out the
  * cached dentry and do a new lookup.
  */
-static int nfs_lookup_revalidate(struct dentry *dentry, unsigned int flags)
+static int
+nfs_do_lookup_revalidate(struct inode *dir, struct dentry *dentry,
+			 unsigned int flags)
 {
-	struct inode *dir;
 	struct inode *inode;
-	struct dentry *parent;
-	struct nfs_fh *fhandle = NULL;
-	struct nfs_fattr *fattr = NULL;
-	struct nfs4_label *label = NULL;
 	int error;
 
-	if (flags & LOOKUP_RCU) {
-		parent = READ_ONCE(dentry->d_parent);
-		dir = d_inode_rcu(parent);
-		if (!dir)
-			return -ECHILD;
-	} else {
-		parent = dget_parent(dentry);
-		dir = d_inode(parent);
-	}
 	nfs_inc_stats(dir, NFSIOS_DENTRYREVALIDATE);
 	inode = d_inode(dentry);
 
-	if (!inode) {
-		if (nfs_neg_need_reval(dir, dentry, flags)) {
-			if (flags & LOOKUP_RCU)
-				return -ECHILD;
-			goto out_bad;
-		}
-		goto out_valid;
-	}
+	if (!inode)
+		return nfs_lookup_revalidate_negative(dir, dentry, flags);
 
 	if (is_bad_inode(inode)) {
-		if (flags & LOOKUP_RCU)
-			return -ECHILD;
 		dfprintk(LOOKUPCACHE, "%s: %pd2 has dud inode\n",
 				__func__, dentry);
 		goto out_bad;
 	}
 
 	if (NFS_PROTO(dir)->have_delegation(inode, FMODE_READ))
-		goto out_set_verifier;
+		return nfs_lookup_revalidate_delegated(dir, dentry, inode);
 
 	/* Force a full look up iff the parent directory has changed */
 	if (!(flags & (LOOKUP_EXCL | LOOKUP_REVAL)) &&
 	    nfs_check_verifier(dir, dentry, flags & LOOKUP_RCU)) {
 		error = nfs_lookup_verify_inode(inode, flags);
 		if (error) {
-			if (flags & LOOKUP_RCU)
-				return -ECHILD;
 			if (error == -ESTALE)
-				goto out_zap_parent;
-			goto out_error;
+				nfs_zap_caches(dir);
+			goto out_bad;
 		}
 		nfs_advise_use_readdirplus(dir);
 		goto out_valid;
@@ -1146,81 +1218,39 @@ static int nfs_lookup_revalidate(struct
 	if (NFS_STALE(inode))
 		goto out_bad;
 
-	error = -ENOMEM;
-	fhandle = nfs_alloc_fhandle();
-	fattr = nfs_alloc_fattr();
-	if (fhandle == NULL || fattr == NULL)
-		goto out_error;
-
-	label = nfs4_label_alloc(NFS_SERVER(inode), GFP_NOWAIT);
-	if (IS_ERR(label))
-		goto out_error;
-
 	trace_nfs_lookup_revalidate_enter(dir, dentry, flags);
-	error = NFS_PROTO(dir)->lookup(dir, &dentry->d_name, fhandle, fattr, label);
+	error = nfs_lookup_revalidate_dentry(dir, dentry, inode);
 	trace_nfs_lookup_revalidate_exit(dir, dentry, flags, error);
-	if (error == -ESTALE || error == -ENOENT)
-		goto out_bad;
-	if (error)
-		goto out_error;
-	if (nfs_compare_fh(NFS_FH(inode), fhandle))
-		goto out_bad;
-	if ((error = nfs_refresh_inode(inode, fattr)) != 0)
-		goto out_bad;
-
-	nfs_setsecurity(inode, fattr, label);
-
-	nfs_free_fattr(fattr);
-	nfs_free_fhandle(fhandle);
-	nfs4_label_free(label);
+	return error;
+out_valid:
+	return nfs_lookup_revalidate_done(dir, dentry, inode, 1);
+out_bad:
+	if (flags & LOOKUP_RCU)
+		return -ECHILD;
+	return nfs_lookup_revalidate_done(dir, dentry, inode, 0);
+}
 
-	/* set a readdirplus hint that we had a cache miss */
-	nfs_force_use_readdirplus(dir);
+static int
+nfs_lookup_revalidate(struct dentry *dentry, unsigned int flags)
+{
+	struct dentry *parent;
+	struct inode *dir;
+	int ret;
 
-out_set_verifier:
-	nfs_set_verifier(dentry, nfs_save_change_attribute(dir));
- out_valid:
 	if (flags & LOOKUP_RCU) {
+		parent = READ_ONCE(dentry->d_parent);
+		dir = d_inode_rcu(parent);
+		if (!dir)
+			return -ECHILD;
+		ret = nfs_do_lookup_revalidate(dir, dentry, flags);
 		if (parent != READ_ONCE(dentry->d_parent))
 			return -ECHILD;
-	} else
+	} else {
+		parent = dget_parent(dentry);
+		ret = nfs_do_lookup_revalidate(d_inode(parent), dentry, flags);
 		dput(parent);
-	dfprintk(LOOKUPCACHE, "NFS: %s(%pd2) is valid\n",
-			__func__, dentry);
-	return 1;
-out_zap_parent:
-	nfs_zap_caches(dir);
- out_bad:
-	WARN_ON(flags & LOOKUP_RCU);
-	nfs_free_fattr(fattr);
-	nfs_free_fhandle(fhandle);
-	nfs4_label_free(label);
-	nfs_mark_for_revalidate(dir);
-	if (inode && S_ISDIR(inode->i_mode)) {
-		/* Purge readdir caches. */
-		nfs_zap_caches(inode);
-		/*
-		 * We can't d_drop the root of a disconnected tree:
-		 * its d_hash is on the s_anon list and d_drop() would hide
-		 * it from shrink_dcache_for_unmount(), leading to busy
-		 * inodes on unmount and further oopses.
-		 */
-		if (IS_ROOT(dentry))
-			goto out_valid;
 	}
-	dput(parent);
-	dfprintk(LOOKUPCACHE, "NFS: %s(%pd2) is invalid\n",
-			__func__, dentry);
-	return 0;
-out_error:
-	WARN_ON(flags & LOOKUP_RCU);
-	nfs_free_fattr(fattr);
-	nfs_free_fhandle(fhandle);
-	nfs4_label_free(label);
-	dput(parent);
-	dfprintk(LOOKUPCACHE, "NFS: %s(%pd2) lookup returned error %d\n",
-			__func__, dentry, error);
-	return error;
+	return ret;
 }
 
 /*

[PATCH 4.19 05/32] NFSv4: Fix lookup revalidate of regular files

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

commit c7944ebb9ce9461079659e9e6ec5baaf73724b3b upstream.

If we're revalidating an existing dentry in order to open a file, we need
to ensure that we check the directory has not changed before we optimise
away the lookup.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Qian Lu <luqia@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/dir.c |   79 +++++++++++++++++++++++++++++------------------------------
 1 file changed, 39 insertions(+), 40 deletions(-)

--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1231,7 +1231,8 @@ out_bad:
 }
 
 static int
-nfs_lookup_revalidate(struct dentry *dentry, unsigned int flags)
+__nfs_lookup_revalidate(struct dentry *dentry, unsigned int flags,
+			int (*reval)(struct inode *, struct dentry *, unsigned int))
 {
 	struct dentry *parent;
 	struct inode *dir;
@@ -1242,17 +1243,22 @@ nfs_lookup_revalidate(struct dentry *den
 		dir = d_inode_rcu(parent);
 		if (!dir)
 			return -ECHILD;
-		ret = nfs_do_lookup_revalidate(dir, dentry, flags);
+		ret = reval(dir, dentry, flags);
 		if (parent != READ_ONCE(dentry->d_parent))
 			return -ECHILD;
 	} else {
 		parent = dget_parent(dentry);
-		ret = nfs_do_lookup_revalidate(d_inode(parent), dentry, flags);
+		ret = reval(d_inode(parent), dentry, flags);
 		dput(parent);
 	}
 	return ret;
 }
 
+static int nfs_lookup_revalidate(struct dentry *dentry, unsigned int flags)
+{
+	return __nfs_lookup_revalidate(dentry, flags, nfs_do_lookup_revalidate);
+}
+
 /*
  * A weaker form of d_revalidate for revalidating just the d_inode(dentry)
  * when we don't really care about the dentry name. This is called when a
@@ -1609,62 +1615,55 @@ no_open:
 }
 EXPORT_SYMBOL_GPL(nfs_atomic_open);
 
-static int nfs4_lookup_revalidate(struct dentry *dentry, unsigned int flags)
+static int
+nfs4_do_lookup_revalidate(struct inode *dir, struct dentry *dentry,
+			  unsigned int flags)
 {
 	struct inode *inode;
-	int ret = 0;
 
 	if (!(flags & LOOKUP_OPEN) || (flags & LOOKUP_DIRECTORY))
-		goto no_open;
+		goto full_reval;
 	if (d_mountpoint(dentry))
-		goto no_open;
-	if (NFS_SB(dentry->d_sb)->caps & NFS_CAP_ATOMIC_OPEN_V1)
-		goto no_open;
+		goto full_reval;
 
 	inode = d_inode(dentry);
 
 	/* We can't create new files in nfs_open_revalidate(), so we
 	 * optimize away revalidation of negative dentries.
 	 */
-	if (inode == NULL) {
-		struct dentry *parent;
-		struct inode *dir;
-
-		if (flags & LOOKUP_RCU) {
-			parent = READ_ONCE(dentry->d_parent);
-			dir = d_inode_rcu(parent);
-			if (!dir)
-				return -ECHILD;
-		} else {
-			parent = dget_parent(dentry);
-			dir = d_inode(parent);
-		}
-		if (!nfs_neg_need_reval(dir, dentry, flags))
-			ret = 1;
-		else if (flags & LOOKUP_RCU)
-			ret = -ECHILD;
-		if (!(flags & LOOKUP_RCU))
-			dput(parent);
-		else if (parent != READ_ONCE(dentry->d_parent))
-			return -ECHILD;
-		goto out;
-	}
+	if (inode == NULL)
+		goto full_reval;
+
+	if (NFS_PROTO(dir)->have_delegation(inode, FMODE_READ))
+		return nfs_lookup_revalidate_delegated(dir, dentry, inode);
 
 	/* NFS only supports OPEN on regular files */
 	if (!S_ISREG(inode->i_mode))
-		goto no_open;
+		goto full_reval;
+
 	/* We cannot do exclusive creation on a positive dentry */
-	if (flags & LOOKUP_EXCL)
-		goto no_open;
+	if (flags & (LOOKUP_EXCL | LOOKUP_REVAL))
+		goto reval_dentry;
+
+	/* Check if the directory changed */
+	if (!nfs_check_verifier(dir, dentry, flags & LOOKUP_RCU))
+		goto reval_dentry;
 
 	/* Let f_op->open() actually open (and revalidate) the file */
-	ret = 1;
+	return 1;
+reval_dentry:
+	if (flags & LOOKUP_RCU)
+		return -ECHILD;
+	return nfs_lookup_revalidate_dentry(dir, dentry, inode);;
 
-out:
-	return ret;
+full_reval:
+	return nfs_do_lookup_revalidate(dir, dentry, flags);
+}
 
-no_open:
-	return nfs_lookup_revalidate(dentry, flags);
+static int nfs4_lookup_revalidate(struct dentry *dentry, unsigned int flags)
+{
+	return __nfs_lookup_revalidate(dentry, flags,
+			nfs4_do_lookup_revalidate);
 }
 
 #endif /* CONFIG_NFSV4 */

[PATCH 4.19 06/32] usb: dwc2: Disable all EPs on disconnect

[Greg Kroah-Hartman]

From: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>

commit dccf1bad4be7eaa096c1f3697bd37883f9a08ecb upstream.

Disabling all EP's allow to reset EP's to initial state.
On disconnect disable all EP's instead of just killing
all requests. Because of some platform didn't catch
disconnect event, same stuff added to
dwc2_hsotg_core_init_disconnected() function when USB
reset detected on the bus.

Changed from version 1:
Changed lock acquire flow in dwc2_hsotg_ep_disable()
function.

Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/dwc2/gadget.c |   30 +++++++++++++++++++++++-------
 1 file changed, 23 insertions(+), 7 deletions(-)

--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3107,6 +3107,8 @@ static void kill_all_requests(struct dwc
 		dwc2_hsotg_txfifo_flush(hsotg, ep->fifo_index);
 }
 
+static int dwc2_hsotg_ep_disable(struct usb_ep *ep);
+
 /**
  * dwc2_hsotg_disconnect - disconnect service
  * @hsotg: The device state.
@@ -3125,13 +3127,12 @@ void dwc2_hsotg_disconnect(struct dwc2_h
 	hsotg->connected = 0;
 	hsotg->test_mode = 0;
 
+	/* all endpoints should be shutdown */
 	for (ep = 0; ep < hsotg->num_of_eps; ep++) {
 		if (hsotg->eps_in[ep])
-			kill_all_requests(hsotg, hsotg->eps_in[ep],
-					  -ESHUTDOWN);
+			dwc2_hsotg_ep_disable(&hsotg->eps_in[ep]->ep);
 		if (hsotg->eps_out[ep])
-			kill_all_requests(hsotg, hsotg->eps_out[ep],
-					  -ESHUTDOWN);
+			dwc2_hsotg_ep_disable(&hsotg->eps_out[ep]->ep);
 	}
 
 	call_gadget(hsotg, disconnect);
@@ -3189,13 +3190,23 @@ void dwc2_hsotg_core_init_disconnected(s
 	u32 val;
 	u32 usbcfg;
 	u32 dcfg = 0;
+	int ep;
 
 	/* Kill any ep0 requests as controller will be reinitialized */
 	kill_all_requests(hsotg, hsotg->eps_out[0], -ECONNRESET);
 
-	if (!is_usb_reset)
+	if (!is_usb_reset) {
 		if (dwc2_core_reset(hsotg, true))
 			return;
+	} else {
+		/* all endpoints should be shutdown */
+		for (ep = 1; ep < hsotg->num_of_eps; ep++) {
+			if (hsotg->eps_in[ep])
+				dwc2_hsotg_ep_disable(&hsotg->eps_in[ep]->ep);
+			if (hsotg->eps_out[ep])
+				dwc2_hsotg_ep_disable(&hsotg->eps_out[ep]->ep);
+		}
+	}
 
 	/*
 	 * we must now enable ep0 ready for host detection and then
@@ -3996,6 +4007,7 @@ static int dwc2_hsotg_ep_disable(struct
 	unsigned long flags;
 	u32 epctrl_reg;
 	u32 ctrl;
+	int locked;
 
 	dev_dbg(hsotg->dev, "%s(ep %p)\n", __func__, ep);
 
@@ -4011,7 +4023,9 @@ static int dwc2_hsotg_ep_disable(struct
 
 	epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
 
-	spin_lock_irqsave(&hsotg->lock, flags);
+	locked = spin_is_locked(&hsotg->lock);
+	if (!locked)
+		spin_lock_irqsave(&hsotg->lock, flags);
 
 	ctrl = dwc2_readl(hsotg, epctrl_reg);
 
@@ -4035,7 +4049,9 @@ static int dwc2_hsotg_ep_disable(struct
 	hs_ep->fifo_index = 0;
 	hs_ep->fifo_size = 0;
 
-	spin_unlock_irqrestore(&hsotg->lock, flags);
+	if (!locked)
+		spin_unlock_irqrestore(&hsotg->lock, flags);
+
 	return 0;
 }
 

[PATCH 4.19 07/32] usb: dwc2: Fix disable all EPs on disconnect

[Greg Kroah-Hartman]

From: Minas Harutyunyan <minas.harutyunyan@synopsys.com>

commit 4fe4f9fecc36956fd53c8edf96dd0c691ef98ff9 upstream.

Disabling all EP's allow to reset EP's to initial state.
Introduced new function dwc2_hsotg_ep_disable_lock() which
before calling dwc2_hsotg_ep_disable() function acquire
hsotg->lock and release on exiting.
>From dwc2_hsotg_ep_disable() function removed acquiring
hsotg->lock.
In dwc2_hsotg_core_init_disconnected() function when USB
reset interrupt asserted disabling all ep’s by
dwc2_hsotg_ep_disable() function.
This updates eliminating sparse imbalance warnings.

Reverted changes in dwc2_hostg_disconnect() function.
Introduced new function dwc2_hsotg_ep_disable_lock().
Changed dwc2_hsotg_ep_ops. Now disable point to
dwc2_hsotg_ep_disable_lock() function.
In functions dwc2_hsotg_udc_stop() and dwc2_hsotg_suspend()
dwc2_hsotg_ep_disable() function replaced by
dwc2_hsotg_ep_disable_lock() function.
In dwc2_hsotg_ep_disable() function removed acquiring
of hsotg->lock.

Fixes: dccf1bad4be7 ("usb: dwc2: Disable all EP's on disconnect")
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/dwc2/gadget.c |   41 +++++++++++++++++++++++------------------
 1 file changed, 23 insertions(+), 18 deletions(-)

--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3107,8 +3107,6 @@ static void kill_all_requests(struct dwc
 		dwc2_hsotg_txfifo_flush(hsotg, ep->fifo_index);
 }
 
-static int dwc2_hsotg_ep_disable(struct usb_ep *ep);
-
 /**
  * dwc2_hsotg_disconnect - disconnect service
  * @hsotg: The device state.
@@ -3130,9 +3128,11 @@ void dwc2_hsotg_disconnect(struct dwc2_h
 	/* all endpoints should be shutdown */
 	for (ep = 0; ep < hsotg->num_of_eps; ep++) {
 		if (hsotg->eps_in[ep])
-			dwc2_hsotg_ep_disable(&hsotg->eps_in[ep]->ep);
+			kill_all_requests(hsotg, hsotg->eps_in[ep],
+					  -ESHUTDOWN);
 		if (hsotg->eps_out[ep])
-			dwc2_hsotg_ep_disable(&hsotg->eps_out[ep]->ep);
+			kill_all_requests(hsotg, hsotg->eps_out[ep],
+					  -ESHUTDOWN);
 	}
 
 	call_gadget(hsotg, disconnect);
@@ -3176,6 +3176,7 @@ static void dwc2_hsotg_irq_fifoempty(str
 			GINTSTS_PTXFEMP |  \
 			GINTSTS_RXFLVL)
 
+static int dwc2_hsotg_ep_disable(struct usb_ep *ep);
 /**
  * dwc2_hsotg_core_init - issue softreset to the core
  * @hsotg: The device state
@@ -4004,10 +4005,8 @@ static int dwc2_hsotg_ep_disable(struct
 	struct dwc2_hsotg *hsotg = hs_ep->parent;
 	int dir_in = hs_ep->dir_in;
 	int index = hs_ep->index;
-	unsigned long flags;
 	u32 epctrl_reg;
 	u32 ctrl;
-	int locked;
 
 	dev_dbg(hsotg->dev, "%s(ep %p)\n", __func__, ep);
 
@@ -4023,10 +4022,6 @@ static int dwc2_hsotg_ep_disable(struct
 
 	epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
 
-	locked = spin_is_locked(&hsotg->lock);
-	if (!locked)
-		spin_lock_irqsave(&hsotg->lock, flags);
-
 	ctrl = dwc2_readl(hsotg, epctrl_reg);
 
 	if (ctrl & DXEPCTL_EPENA)
@@ -4049,12 +4044,22 @@ static int dwc2_hsotg_ep_disable(struct
 	hs_ep->fifo_index = 0;
 	hs_ep->fifo_size = 0;
 
-	if (!locked)
-		spin_unlock_irqrestore(&hsotg->lock, flags);
-
 	return 0;
 }
 
+static int dwc2_hsotg_ep_disable_lock(struct usb_ep *ep)
+{
+	struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&hsotg->lock, flags);
+	ret = dwc2_hsotg_ep_disable(ep);
+	spin_unlock_irqrestore(&hsotg->lock, flags);
+	return ret;
+}
+
 /**
  * on_list - check request is on the given endpoint
  * @ep: The endpoint to check.
@@ -4202,7 +4207,7 @@ static int dwc2_hsotg_ep_sethalt_lock(st
 
 static const struct usb_ep_ops dwc2_hsotg_ep_ops = {
 	.enable		= dwc2_hsotg_ep_enable,
-	.disable	= dwc2_hsotg_ep_disable,
+	.disable	= dwc2_hsotg_ep_disable_lock,
 	.alloc_request	= dwc2_hsotg_ep_alloc_request,
 	.free_request	= dwc2_hsotg_ep_free_request,
 	.queue		= dwc2_hsotg_ep_queue_lock,
@@ -4342,9 +4347,9 @@ static int dwc2_hsotg_udc_stop(struct us
 	/* all endpoints should be shutdown */
 	for (ep = 1; ep < hsotg->num_of_eps; ep++) {
 		if (hsotg->eps_in[ep])
-			dwc2_hsotg_ep_disable(&hsotg->eps_in[ep]->ep);
+			dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep);
 		if (hsotg->eps_out[ep])
-			dwc2_hsotg_ep_disable(&hsotg->eps_out[ep]->ep);
+			dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep);
 	}
 
 	spin_lock_irqsave(&hsotg->lock, flags);
@@ -4792,9 +4797,9 @@ int dwc2_hsotg_suspend(struct dwc2_hsotg
 
 		for (ep = 0; ep < hsotg->num_of_eps; ep++) {
 			if (hsotg->eps_in[ep])
-				dwc2_hsotg_ep_disable(&hsotg->eps_in[ep]->ep);
+				dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep);
 			if (hsotg->eps_out[ep])
-				dwc2_hsotg_ep_disable(&hsotg->eps_out[ep]->ep);
+				dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep);
 		}
 	}
 

[PATCH 4.19 08/32] arm64: compat: Provide definition for COMPAT_SIGMINSTKSZ

[Greg Kroah-Hartman]

From: Will Deacon <will.deacon@arm.com>

commit 24951465cbd279f60b1fdc2421b3694405bcff42 upstream.

arch/arm/ defines a SIGMINSTKSZ of 2k, so we should use the same value
for compat tasks.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Reported-by: Steve McIntyre <steve.mcintyre@arm.com>
Tested-by: Steve McIntyre <93sam@debian.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/include/asm/compat.h |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm64/include/asm/compat.h
+++ b/arch/arm64/include/asm/compat.h
@@ -159,6 +159,7 @@ static inline compat_uptr_t ptr_to_compa
 }
 
 #define compat_user_stack_pointer() (user_stack_pointer(task_pt_regs(current)))
+#define COMPAT_MINSIGSTKSZ	2048
 
 static inline void __user *arch_compat_alloc_user_space(long len)
 {

[PATCH 4.19 09/32] binder: fix possible UAF when freeing buffer

[Greg Kroah-Hartman]

From: Todd Kjos <tkjos@android.com>

commit a370003cc301d4361bae20c9ef615f89bf8d1e8a upstream.

There is a race between the binder driver cleaning
up a completed transaction via binder_free_transaction()
and a user calling binder_ioctl(BC_FREE_BUFFER) to
release a buffer. It doesn't matter which is first but
they need to be protected against running concurrently
which can result in a UAF.

Signed-off-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>



---
 drivers/android/binder.c |   16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -1960,8 +1960,18 @@ static struct binder_thread *binder_get_
 
 static void binder_free_transaction(struct binder_transaction *t)
 {
-	if (t->buffer)
-		t->buffer->transaction = NULL;
+	struct binder_proc *target_proc = t->to_proc;
+
+	if (target_proc) {
+		binder_inner_proc_lock(target_proc);
+		if (t->buffer)
+			t->buffer->transaction = NULL;
+		binder_inner_proc_unlock(target_proc);
+	}
+	/*
+	 * If the transaction has no target_proc, then
+	 * t->buffer->transaction has already been cleared.
+	 */
 	kfree(t);
 	binder_stats_deleted(BINDER_STAT_TRANSACTION);
 }
@@ -3484,10 +3494,12 @@ static int binder_thread_write(struct bi
 				     buffer->debug_id,
 				     buffer->transaction ? "active" : "finished");
 
+			binder_inner_proc_lock(proc);
 			if (buffer->transaction) {
 				buffer->transaction->buffer = NULL;
 				buffer->transaction = NULL;
 			}
+			binder_inner_proc_unlock(proc);
 			if (buffer->async_transaction && buffer->target_node) {
 				struct binder_node *buf_node;
 				struct binder_work *w;

[PATCH 4.19 10/32] ISDN: hfcsusb: checking idx of ep configuration

[Greg Kroah-Hartman]

From: Phong Tran <tranmanphong@gmail.com>

commit f384e62a82ba5d85408405fdd6aeff89354deaa9 upstream.

The syzbot test with random endpoint address which made the idx is
overflow in the table of endpoint configuations.

this adds the checking for fixing the error report from
syzbot

KASAN: stack-out-of-bounds Read in hfcsusb_probe [1]
The patch tested by syzbot [2]

Reported-by: syzbot+8750abbc3a46ef47d509@syzkaller.appspotmail.com

[1]:
https://syzkaller.appspot.com/bug?id=30a04378dac680c5d521304a00a86156bb913522
[2]:
https://groups.google.com/d/msg/syzkaller-bugs/_6HBdge8F3E/OJn7wVNpBAAJ

Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/isdn/hardware/mISDN/hfcsusb.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -1967,6 +1967,9 @@ hfcsusb_probe(struct usb_interface *intf
 
 				/* get endpoint base */
 				idx = ((ep_addr & 0x7f) - 1) * 2;
+				if (idx > 15)
+					return -EIO;
+
 				if (ep_addr & 0x80)
 					idx++;
 				attr = ep->desc.bmAttributes;

[PATCH 4.19 11/32] media: au0828: fix null dereference in error path

[Greg Kroah-Hartman]

From: Sean Young <sean@mess.org>

commit 6d0d1ff9ff21fbb06b867c13a1d41ce8ddcd8230 upstream.

au0828_usb_disconnect() gets the au0828_dev struct via usb_get_intfdata,
so it needs to set up for the error paths.

Reported-by: syzbot+357d86bcb4cca1a2f572@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/au0828/au0828-core.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/media/usb/au0828/au0828-core.c
+++ b/drivers/media/usb/au0828/au0828-core.c
@@ -623,6 +623,12 @@ static int au0828_usb_probe(struct usb_i
 	/* Setup */
 	au0828_card_setup(dev);
 
+	/*
+	 * Store the pointer to the au0828_dev so it can be accessed in
+	 * au0828_usb_disconnect
+	 */
+	usb_set_intfdata(interface, dev);
+
 	/* Analog TV */
 	retval = au0828_analog_register(dev, interface);
 	if (retval) {
@@ -641,12 +647,6 @@ static int au0828_usb_probe(struct usb_i
 	/* Remote controller */
 	au0828_rc_register(dev);
 
-	/*
-	 * Store the pointer to the au0828_dev so it can be accessed in
-	 * au0828_usb_disconnect
-	 */
-	usb_set_intfdata(interface, dev);
-
 	pr_info("Registered device AU0828 [%s]\n",
 		dev->board.name == NULL ? "Unset" : dev->board.name);
 

[PATCH 4.19 12/32] ath10k: Change the warning message string

[Greg Kroah-Hartman]

From: Fabio Estevam <festevam@gmail.com>

commit 265df32eae5845212ad9f55f5ae6b6dcb68b187b upstream.

The "WARNING" string confuses syzbot, which thinks it found
a crash [1].

Change the string to avoid such problem.

[1] https://lkml.org/lkml/2019/5/9/243

Reported-by: syzbot+c1b25598aa60dcd47e78@syzkaller.appspotmail.com
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath10k/usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/ath/ath10k/usb.c
+++ b/drivers/net/wireless/ath/ath10k/usb.c
@@ -1025,7 +1025,7 @@ static int ath10k_usb_probe(struct usb_i
 	}
 
 	/* TODO: remove this once USB support is fully implemented */
-	ath10k_warn(ar, "WARNING: ath10k USB support is incomplete, don't expect anything to work!\n");
+	ath10k_warn(ar, "Warning: ath10k USB support is incomplete, don't expect anything to work!\n");
 
 	return 0;
 

[PATCH 4.19 13/32] media: cpia2_usb: first wake up, then free in disconnect

[Greg Kroah-Hartman]

From: Oliver Neukum <oneukum@suse.com>

commit eff73de2b1600ad8230692f00bc0ab49b166512a upstream.

Kasan reported a use after free in cpia2_usb_disconnect()
It first freed everything and then woke up those waiting.
The reverse order is correct.

Fixes: 6c493f8b28c67 ("[media] cpia2: major overhaul to get it in a working state again")

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: syzbot+0c90fc937c84f97d0aa6@syzkaller.appspotmail.com
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/cpia2/cpia2_usb.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/media/usb/cpia2/cpia2_usb.c
+++ b/drivers/media/usb/cpia2/cpia2_usb.c
@@ -902,7 +902,6 @@ static void cpia2_usb_disconnect(struct
 	cpia2_unregister_camera(cam);
 	v4l2_device_disconnect(&cam->v4l2_dev);
 	mutex_unlock(&cam->v4l2_lock);
-	v4l2_device_put(&cam->v4l2_dev);
 
 	if(cam->buffers) {
 		DBG("Wakeup waiting processes\n");
@@ -911,6 +910,8 @@ static void cpia2_usb_disconnect(struct
 		wake_up_interruptible(&cam->wq_stream);
 	}
 
+	v4l2_device_put(&cam->v4l2_dev);
+
 	LOG("CPiA2 camera disconnected.\n");
 }
 

[PATCH 4.19 14/32] media: pvrusb2: use a different format for warnings

[Greg Kroah-Hartman]

From: Andrey Konovalov <andreyknvl@google.com>

commit 1753c7c4367aa1201e1e5d0a601897ab33444af1 upstream.

When the pvrusb2 driver detects that there's something wrong with the
device, it prints a warning message. Right now those message are
printed in two different formats:

1. ***WARNING*** message here
2. WARNING: message here

There's an issue with the second format. Syzkaller recognizes it as a
message produced by a WARN_ON(), which is used to indicate a bug in the
kernel. However pvrusb2 prints those warnings to indicate an issue with
the device, not the bug in the kernel.

This patch changes the pvrusb2 driver to consistently use the first
warning message format. This will unblock syzkaller testing of this
driver.

Reported-by: syzbot+af8f8d2ac0d39b0ed3a0@syzkaller.appspotmail.com
Reported-by: syzbot+170a86bf206dd2c6217e@syzkaller.appspotmail.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/pvrusb2/pvrusb2-hdw.c      |    4 ++--
 drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c |    6 +++---
 drivers/media/usb/pvrusb2/pvrusb2-std.c      |    2 +-
 3 files changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
@@ -1680,7 +1680,7 @@ static int pvr2_decoder_enable(struct pv
 	}
 	if (!hdw->flag_decoder_missed) {
 		pvr2_trace(PVR2_TRACE_ERROR_LEGS,
-			   "WARNING: No decoder present");
+			   "***WARNING*** No decoder present");
 		hdw->flag_decoder_missed = !0;
 		trace_stbit("flag_decoder_missed",
 			    hdw->flag_decoder_missed);
@@ -2366,7 +2366,7 @@ struct pvr2_hdw *pvr2_hdw_create(struct
 	if (hdw_desc->flag_is_experimental) {
 		pvr2_trace(PVR2_TRACE_INFO, "**********");
 		pvr2_trace(PVR2_TRACE_INFO,
-			   "WARNING: Support for this device (%s) is experimental.",
+			   "***WARNING*** Support for this device (%s) is experimental.",
 							      hdw_desc->description);
 		pvr2_trace(PVR2_TRACE_INFO,
 			   "Important functionality might not be entirely working.");
--- a/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-i2c-core.c
@@ -343,11 +343,11 @@ static int i2c_hack_cx25840(struct pvr2_
 
 	if ((ret != 0) || (*rdata == 0x04) || (*rdata == 0x0a)) {
 		pvr2_trace(PVR2_TRACE_ERROR_LEGS,
-			   "WARNING: Detected a wedged cx25840 chip; the device will not work.");
+			   "***WARNING*** Detected a wedged cx25840 chip; the device will not work.");
 		pvr2_trace(PVR2_TRACE_ERROR_LEGS,
-			   "WARNING: Try power cycling the pvrusb2 device.");
+			   "***WARNING*** Try power cycling the pvrusb2 device.");
 		pvr2_trace(PVR2_TRACE_ERROR_LEGS,
-			   "WARNING: Disabling further access to the device to prevent other foul-ups.");
+			   "***WARNING*** Disabling further access to the device to prevent other foul-ups.");
 		// This blocks all further communication with the part.
 		hdw->i2c_func[0x44] = NULL;
 		pvr2_hdw_render_useless(hdw);
--- a/drivers/media/usb/pvrusb2/pvrusb2-std.c
+++ b/drivers/media/usb/pvrusb2/pvrusb2-std.c
@@ -353,7 +353,7 @@ struct v4l2_standard *pvr2_std_create_en
 		bcnt = pvr2_std_id_to_str(buf,sizeof(buf),fmsk);
 		pvr2_trace(
 			PVR2_TRACE_ERROR_LEGS,
-			"WARNING: Failed to classify the following standard(s): %.*s",
+			"***WARNING*** Failed to classify the following standard(s): %.*s",
 			bcnt,buf);
 	}
 

[PATCH 4.19 15/32] NFS: Cleanup if nfs_match_client is interrupted

[Greg Kroah-Hartman]

From: Benjamin Coddington <bcodding@redhat.com>

commit 9f7761cf0409465075dadb875d5d4b8ef2f890c8 upstream.

Don't bail out before cleaning up a new allocation if the wait for
searching for a matching nfs client is interrupted.  Memory leaks.

Reported-by: syzbot+7fe11b49c1cc30e3fce2@syzkaller.appspotmail.com
Fixes: 950a578c6128 ("NFS: make nfs_match_client killable")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/client.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -416,10 +416,10 @@ struct nfs_client *nfs_get_client(const
 		clp = nfs_match_client(cl_init);
 		if (clp) {
 			spin_unlock(&nn->nfs_client_lock);
-			if (IS_ERR(clp))
-				return clp;
 			if (new)
 				new->rpc_ops->free_client(new);
+			if (IS_ERR(clp))
+				return clp;
 			return nfs_found_client(cl_init, clp);
 		}
 		if (new) {

[PATCH 4.19 16/32] media: radio-raremono: change devm_k*alloc to k*alloc

[Greg Kroah-Hartman]

From: Luke Nowakowski-Krijger <lnowakow@eng.ucsd.edu>

commit c666355e60ddb4748ead3bdd983e3f7f2224aaf0 upstream.

Change devm_k*alloc to k*alloc to manually allocate memory

The manual allocation and freeing of memory is necessary because when
the USB radio is disconnected, the memory associated with devm_k*alloc
is freed. Meaning if we still have unresolved references to the radio
device, then we get use-after-free errors.

This patch fixes this by manually allocating memory, and freeing it in
the v4l2.release callback that gets called when the last radio device
exits.

Reported-and-tested-by: syzbot+a4387f5b6b799f6becbf@syzkaller.appspotmail.com

Signed-off-by: Luke Nowakowski-Krijger <lnowakow@eng.ucsd.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: cleaned up two small checkpatch.pl warnings]
[hverkuil-cisco@xs4all.nl: prefix subject with driver name]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/radio/radio-raremono.c |   30 +++++++++++++++++++++++-------
 1 file changed, 23 insertions(+), 7 deletions(-)

--- a/drivers/media/radio/radio-raremono.c
+++ b/drivers/media/radio/radio-raremono.c
@@ -271,6 +271,14 @@ static int vidioc_g_frequency(struct fil
 	return 0;
 }
 
+static void raremono_device_release(struct v4l2_device *v4l2_dev)
+{
+	struct raremono_device *radio = to_raremono_dev(v4l2_dev);
+
+	kfree(radio->buffer);
+	kfree(radio);
+}
+
 /* File system interface */
 static const struct v4l2_file_operations usb_raremono_fops = {
 	.owner		= THIS_MODULE,
@@ -295,12 +303,14 @@ static int usb_raremono_probe(struct usb
 	struct raremono_device *radio;
 	int retval = 0;
 
-	radio = devm_kzalloc(&intf->dev, sizeof(struct raremono_device), GFP_KERNEL);
-	if (radio)
-		radio->buffer = devm_kmalloc(&intf->dev, BUFFER_LENGTH, GFP_KERNEL);
-
-	if (!radio || !radio->buffer)
+	radio = kzalloc(sizeof(*radio), GFP_KERNEL);
+	if (!radio)
+		return -ENOMEM;
+	radio->buffer = kmalloc(BUFFER_LENGTH, GFP_KERNEL);
+	if (!radio->buffer) {
+		kfree(radio);
 		return -ENOMEM;
+	}
 
 	radio->usbdev = interface_to_usbdev(intf);
 	radio->intf = intf;
@@ -324,7 +334,8 @@ static int usb_raremono_probe(struct usb
 	if (retval != 3 ||
 	    (get_unaligned_be16(&radio->buffer[1]) & 0xfff) == 0x0242) {
 		dev_info(&intf->dev, "this is not Thanko's Raremono.\n");
-		return -ENODEV;
+		retval = -ENODEV;
+		goto free_mem;
 	}
 
 	dev_info(&intf->dev, "Thanko's Raremono connected: (%04X:%04X)\n",
@@ -333,7 +344,7 @@ static int usb_raremono_probe(struct usb
 	retval = v4l2_device_register(&intf->dev, &radio->v4l2_dev);
 	if (retval < 0) {
 		dev_err(&intf->dev, "couldn't register v4l2_device\n");
-		return retval;
+		goto free_mem;
 	}
 
 	mutex_init(&radio->lock);
@@ -345,6 +356,7 @@ static int usb_raremono_probe(struct usb
 	radio->vdev.ioctl_ops = &usb_raremono_ioctl_ops;
 	radio->vdev.lock = &radio->lock;
 	radio->vdev.release = video_device_release_empty;
+	radio->v4l2_dev.release = raremono_device_release;
 
 	usb_set_intfdata(intf, &radio->v4l2_dev);
 
@@ -360,6 +372,10 @@ static int usb_raremono_probe(struct usb
 	}
 	dev_err(&intf->dev, "could not register video device\n");
 	v4l2_device_unregister(&radio->v4l2_dev);
+
+free_mem:
+	kfree(radio->buffer);
+	kfree(radio);
 	return retval;
 }
 

[PATCH 4.19 17/32] iommu/vt-d: Dont queue_iova() if there is no flush queue

[Greg Kroah-Hartman]

From: Dmitry Safonov <dima@arista.com>

commit effa467870c7612012885df4e246bdb8ffd8e44c upstream.

Intel VT-d driver was reworked to use common deferred flushing
implementation. Previously there was one global per-cpu flush queue,
afterwards - one per domain.

Before deferring a flush, the queue should be allocated and initialized.

Currently only domains with IOMMU_DOMAIN_DMA type initialize their flush
queue. It's probably worth to init it for static or unmanaged domains
too, but it may be arguable - I'm leaving it to iommu folks.

Prevent queuing an iova flush if the domain doesn't have a queue.
The defensive check seems to be worth to keep even if queue would be
initialized for all kinds of domains. And is easy backportable.

On 4.19.43 stable kernel it has a user-visible effect: previously for
devices in si domain there were crashes, on sata devices:

 BUG: spinlock bad magic on CPU#6, swapper/0/1
  lock: 0xffff88844f582008, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
 CPU: 6 PID: 1 Comm: swapper/0 Not tainted 4.19.43 #1
 Call Trace:
  <IRQ>
  dump_stack+0x61/0x7e
  spin_bug+0x9d/0xa3
  do_raw_spin_lock+0x22/0x8e
  _raw_spin_lock_irqsave+0x32/0x3a
  queue_iova+0x45/0x115
  intel_unmap+0x107/0x113
  intel_unmap_sg+0x6b/0x76
  __ata_qc_complete+0x7f/0x103
  ata_qc_complete+0x9b/0x26a
  ata_qc_complete_multiple+0xd0/0xe3
  ahci_handle_port_interrupt+0x3ee/0x48a
  ahci_handle_port_intr+0x73/0xa9
  ahci_single_level_irq_intr+0x40/0x60
  __handle_irq_event_percpu+0x7f/0x19a
  handle_irq_event_percpu+0x32/0x72
  handle_irq_event+0x38/0x56
  handle_edge_irq+0x102/0x121
  handle_irq+0x147/0x15c
  do_IRQ+0x66/0xf2
  common_interrupt+0xf/0xf
 RIP: 0010:__do_softirq+0x8c/0x2df

The same for usb devices that use ehci-pci:
 BUG: spinlock bad magic on CPU#0, swapper/0/1
  lock: 0xffff88844f402008, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.43 #4
 Call Trace:
  <IRQ>
  dump_stack+0x61/0x7e
  spin_bug+0x9d/0xa3
  do_raw_spin_lock+0x22/0x8e
  _raw_spin_lock_irqsave+0x32/0x3a
  queue_iova+0x77/0x145
  intel_unmap+0x107/0x113
  intel_unmap_page+0xe/0x10
  usb_hcd_unmap_urb_setup_for_dma+0x53/0x9d
  usb_hcd_unmap_urb_for_dma+0x17/0x100
  unmap_urb_for_dma+0x22/0x24
  __usb_hcd_giveback_urb+0x51/0xc3
  usb_giveback_urb_bh+0x97/0xde
  tasklet_action_common.isra.4+0x5f/0xa1
  tasklet_action+0x2d/0x30
  __do_softirq+0x138/0x2df
  irq_exit+0x7d/0x8b
  smp_apic_timer_interrupt+0x10f/0x151
  apic_timer_interrupt+0xf/0x20
  </IRQ>
 RIP: 0010:_raw_spin_unlock_irqrestore+0x17/0x39

Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: <stable@vger.kernel.org> # 4.14+
Fixes: 13cf01744608 ("iommu/vt-d: Make use of iova deferred flushing")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
[v4.14-port notes:
o minor conflict with untrusted IOMMU devices check under if-condition]
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/iommu/intel-iommu.c |    2 +-
 drivers/iommu/iova.c        |   18 ++++++++++++++----
 include/linux/iova.h        |    6 ++++++
 3 files changed, 21 insertions(+), 5 deletions(-)

--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -3721,7 +3721,7 @@ static void intel_unmap(struct device *d
 
 	freelist = domain_unmap(domain, start_pfn, last_pfn);
 
-	if (intel_iommu_strict) {
+	if (intel_iommu_strict || !has_iova_flush_queue(&domain->iovad)) {
 		iommu_flush_iotlb_psi(iommu, domain, start_pfn,
 				      nrpages, !freelist, 0);
 		/* free iova */
--- a/drivers/iommu/iova.c
+++ b/drivers/iommu/iova.c
@@ -65,9 +65,14 @@ init_iova_domain(struct iova_domain *iov
 }
 EXPORT_SYMBOL_GPL(init_iova_domain);
 
+bool has_iova_flush_queue(struct iova_domain *iovad)
+{
+	return !!iovad->fq;
+}
+
 static void free_iova_flush_queue(struct iova_domain *iovad)
 {
-	if (!iovad->fq)
+	if (!has_iova_flush_queue(iovad))
 		return;
 
 	if (timer_pending(&iovad->fq_timer))
@@ -85,13 +90,14 @@ static void free_iova_flush_queue(struct
 int init_iova_flush_queue(struct iova_domain *iovad,
 			  iova_flush_cb flush_cb, iova_entry_dtor entry_dtor)
 {
+	struct iova_fq __percpu *queue;
 	int cpu;
 
 	atomic64_set(&iovad->fq_flush_start_cnt,  0);
 	atomic64_set(&iovad->fq_flush_finish_cnt, 0);
 
-	iovad->fq = alloc_percpu(struct iova_fq);
-	if (!iovad->fq)
+	queue = alloc_percpu(struct iova_fq);
+	if (!queue)
 		return -ENOMEM;
 
 	iovad->flush_cb   = flush_cb;
@@ -100,13 +106,17 @@ int init_iova_flush_queue(struct iova_do
 	for_each_possible_cpu(cpu) {
 		struct iova_fq *fq;
 
-		fq = per_cpu_ptr(iovad->fq, cpu);
+		fq = per_cpu_ptr(queue, cpu);
 		fq->head = 0;
 		fq->tail = 0;
 
 		spin_lock_init(&fq->lock);
 	}
 
+	smp_wmb();
+
+	iovad->fq = queue;
+
 	timer_setup(&iovad->fq_timer, fq_flush_timeout, 0);
 	atomic_set(&iovad->fq_timer_on, 0);
 
--- a/include/linux/iova.h
+++ b/include/linux/iova.h
@@ -156,6 +156,7 @@ struct iova *reserve_iova(struct iova_do
 void copy_reserved_iova(struct iova_domain *from, struct iova_domain *to);
 void init_iova_domain(struct iova_domain *iovad, unsigned long granule,
 	unsigned long start_pfn);
+bool has_iova_flush_queue(struct iova_domain *iovad);
 int init_iova_flush_queue(struct iova_domain *iovad,
 			  iova_flush_cb flush_cb, iova_entry_dtor entry_dtor);
 struct iova *find_iova(struct iova_domain *iovad, unsigned long pfn);
@@ -236,6 +237,11 @@ static inline void init_iova_domain(stru
 {
 }
 
+bool has_iova_flush_queue(struct iova_domain *iovad)
+{
+	return false;
+}
+
 static inline int init_iova_flush_queue(struct iova_domain *iovad,
 					iova_flush_cb flush_cb,
 					iova_entry_dtor entry_dtor)

Re: [PATCH 4.19 17/32] iommu/vt-d: Dont queue_iova() if there is no flush queue

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1423 bytes --]

Hi!

> --- a/drivers/iommu/intel-iommu.c
> +++ b/drivers/iommu/intel-iommu.c
> @@ -3721,7 +3721,7 @@ static void intel_unmap(struct device *d
>  
>  	freelist = domain_unmap(domain, start_pfn, last_pfn);
>  
> -	if (intel_iommu_strict) {
> +	if (intel_iommu_strict || !has_iova_flush_queue(&domain->iovad)) {
>  		iommu_flush_iotlb_psi(iommu, domain, start_pfn,
>  				      nrpages, !freelist, 0);
>  		/* free iova */
> --- a/drivers/iommu/iova.c
> +++ b/drivers/iommu/iova.c
> @@ -65,9 +65,14 @@ init_iova_domain(struct iova_domain *iov
>  }
>  EXPORT_SYMBOL_GPL(init_iova_domain);
>  
> +bool has_iova_flush_queue(struct iova_domain *iovad)
> +{
> +	return !!iovad->fq;

Should this be READ_ONCE()?

> @@ -100,13 +106,17 @@ int init_iova_flush_queue(struct iova_do
>  	for_each_possible_cpu(cpu) {
>  		struct iova_fq *fq;
>  
> -		fq = per_cpu_ptr(iovad->fq, cpu);
> +		fq = per_cpu_ptr(queue, cpu);
>  		fq->head = 0;
>  		fq->tail = 0;
>  
>  		spin_lock_init(&fq->lock);
>  	}
>  
> +	smp_wmb();
> +
> +	iovad->fq = queue;
> +

Could we have a comment why the barrier is needed, and perhaps there
should be oposing smp_rmb() somewhere? Does this need to be
WRITE_ONCE() as it is racing against reader?

Thanks,
									Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH 4.19 17/32] iommu/vt-d: Dont queue_iova() if there is no flush queue

[Dmitry Safonov]

Hi Pavel,

On 8/3/19 10:34 PM, Pavel Machek wrote:
> Hi!
> 
>> --- a/drivers/iommu/intel-iommu.c
>> +++ b/drivers/iommu/intel-iommu.c
>> @@ -3721,7 +3721,7 @@ static void intel_unmap(struct device *d
>>  
>>  	freelist = domain_unmap(domain, start_pfn, last_pfn);
>>  
>> -	if (intel_iommu_strict) {
>> +	if (intel_iommu_strict || !has_iova_flush_queue(&domain->iovad)) {
>>  		iommu_flush_iotlb_psi(iommu, domain, start_pfn,
>>  				      nrpages, !freelist, 0);
>>  		/* free iova */
>> --- a/drivers/iommu/iova.c
>> +++ b/drivers/iommu/iova.c
>> @@ -65,9 +65,14 @@ init_iova_domain(struct iova_domain *iov
>>  }
>>  EXPORT_SYMBOL_GPL(init_iova_domain);
>>  
>> +bool has_iova_flush_queue(struct iova_domain *iovad)
>> +{
>> +	return !!iovad->fq;
> 
> Should this be READ_ONCE()?

Why? Compiler can't anyhow assume that it's always true/false and there
is a clear data dependency between this and:
:	queue_iova(&domain->iovad, iova_pfn, nrpages,
:			   (unsigned long)freelist);

> 
>> @@ -100,13 +106,17 @@ int init_iova_flush_queue(struct iova_do
>>  	for_each_possible_cpu(cpu) {
>>  		struct iova_fq *fq;
>>  
>> -		fq = per_cpu_ptr(iovad->fq, cpu);
>> +		fq = per_cpu_ptr(queue, cpu);
>>  		fq->head = 0;
>>  		fq->tail = 0;
>>  
>>  		spin_lock_init(&fq->lock);
>>  	}
>>  
>> +	smp_wmb();
>> +
>> +	iovad->fq = queue;
>> +
> 
> Could we have a comment why the barrier is needed,

I'm up for the comment if you feel like it - in my POV it's quite
obvious that we want finish initializing the queue's internals before
assigning the queue. I didn't put the comment exactly because I felt
like it would state something evident [in my POV].

> and perhaps there
> should be oposing smp_rmb() somewhere? Does this need to be
> WRITE_ONCE() as it is racing against reader?

I feel confused. I might have forgotten everything about barriers, but
again if I'm not mistaken, one doesn't need a barrier in:
: if (A->a != NULL)
:     use(A); /* dereferences A->a */
: else
:     /* don't use `a' */

Thanks,
          Dmitry

Re: [PATCH 4.19 17/32] iommu/vt-d: Dont queue_iova() if there is no flush queue

[Dmitry Safonov]

On 8/6/19 11:47 PM, Dmitry Safonov wrote:
> Hi Pavel,
> 
> On 8/3/19 10:34 PM, Pavel Machek wrote:
>> Hi!
>>
>>> --- a/drivers/iommu/intel-iommu.c
>>> +++ b/drivers/iommu/intel-iommu.c
>>> @@ -3721,7 +3721,7 @@ static void intel_unmap(struct device *d
>>>  
>>>  	freelist = domain_unmap(domain, start_pfn, last_pfn);
>>>  
>>> -	if (intel_iommu_strict) {
>>> +	if (intel_iommu_strict || !has_iova_flush_queue(&domain->iovad)) {
>>>  		iommu_flush_iotlb_psi(iommu, domain, start_pfn,
>>>  				      nrpages, !freelist, 0);
>>>  		/* free iova */
>>> --- a/drivers/iommu/iova.c
>>> +++ b/drivers/iommu/iova.c
>>> @@ -65,9 +65,14 @@ init_iova_domain(struct iova_domain *iov
>>>  }
>>>  EXPORT_SYMBOL_GPL(init_iova_domain);
>>>  
>>> +bool has_iova_flush_queue(struct iova_domain *iovad)
>>> +{
>>> +	return !!iovad->fq;
>>
>> Should this be READ_ONCE()?
> 
> Why? Compiler can't anyhow assume that it's always true/false and there
> is a clear data dependency between this and:
> :	queue_iova(&domain->iovad, iova_pfn, nrpages,
> :			   (unsigned long)freelist);
> 
>>
>>> @@ -100,13 +106,17 @@ int init_iova_flush_queue(struct iova_do
>>>  	for_each_possible_cpu(cpu) {
>>>  		struct iova_fq *fq;
>>>  
>>> -		fq = per_cpu_ptr(iovad->fq, cpu);
>>> +		fq = per_cpu_ptr(queue, cpu);
>>>  		fq->head = 0;
>>>  		fq->tail = 0;
>>>  
>>>  		spin_lock_init(&fq->lock);
>>>  	}
>>>  
>>> +	smp_wmb();
>>> +
>>> +	iovad->fq = queue;
>>> +
>>
>> Could we have a comment why the barrier is needed,
> 
> I'm up for the comment if you feel like it - in my POV it's quite
> obvious that we want finish initializing the queue's internals before
> assigning the queue. I didn't put the comment exactly because I felt
> like it would state something evident [in my POV].
> 
>> and perhaps there
>> should be oposing smp_rmb() somewhere? Does this need to be
>> WRITE_ONCE() as it is racing against reader?
> 
> I feel confused. I might have forgotten everything about barriers, but
> again if I'm not mistaken, one doesn't need a barrier in:
> : if (A->a != NULL)
> :     use(A); /* dereferences A->a */
> : else
> :     /* don't use `a' */

And in this simplified example I mean that use() will either see A->a
initialized (IOW, CPU can't load A->a->field1 before checking the
condition) or use() will not be called.

Thanks,
          Dmitry

[PATCH 4.19 18/32] iommu/iova: Fix compilation error with !CONFIG_IOMMU_IOVA

[Greg Kroah-Hartman]

From: Joerg Roedel <jroedel@suse.de>

commit 201c1db90cd643282185a00770f12f95da330eca upstream.

The stub function for !CONFIG_IOMMU_IOVA needs to be
'static inline'.

Fixes: effa467870c76 ('iommu/vt-d: Don't queue_iova() if there is no flush queue')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/iova.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/linux/iova.h
+++ b/include/linux/iova.h
@@ -237,7 +237,7 @@ static inline void init_iova_domain(stru
 {
 }
 
-bool has_iova_flush_queue(struct iova_domain *iovad)
+static inline bool has_iova_flush_queue(struct iova_domain *iovad)
 {
 	return false;
 }

[PATCH 4.19 19/32] Bluetooth: hci_uart: check for missing tty operations

[Greg Kroah-Hartman]

From: Vladis Dronov <vdronov@redhat.com>

commit b36a1552d7319bbfd5cf7f08726c23c5c66d4f73 upstream.

Certain ttys operations (pty_unix98_ops) lack tiocmget() and tiocmset()
functions which are called by the certain HCI UART protocols (hci_ath,
hci_bcm, hci_intel, hci_mrvl, hci_qca) via hci_uart_set_flow_control()
or directly. This leads to an execution at NULL and can be triggered by
an unprivileged user. Fix this by adding a helper function and a check
for the missing tty operations in the protocols code.

This fixes CVE-2019-10207. The Fixes: lines list commits where calls to
tiocm[gs]et() or hci_uart_set_flow_control() were added to the HCI UART
protocols.

Link: https://syzkaller.appspot.com/bug?id=1b42faa2848963564a5b1b7f8c837ea7b55ffa50
Reported-by: syzbot+79337b501d6aa974d0f6@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org # v2.6.36+
Fixes: b3190df62861 ("Bluetooth: Support for Atheros AR300x serial chip")
Fixes: 118612fb9165 ("Bluetooth: hci_bcm: Add suspend/resume PM functions")
Fixes: ff2895592f0f ("Bluetooth: hci_intel: Add Intel baudrate configuration support")
Fixes: 162f812f23ba ("Bluetooth: hci_uart: Add Marvell support")
Fixes: fa9ad876b8e0 ("Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990")
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Yu-Chen, Cho <acho@suse.com>
Tested-by: Yu-Chen, Cho <acho@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/bluetooth/hci_ath.c   |    3 +++
 drivers/bluetooth/hci_bcm.c   |    3 +++
 drivers/bluetooth/hci_intel.c |    3 +++
 drivers/bluetooth/hci_ldisc.c |   13 +++++++++++++
 drivers/bluetooth/hci_mrvl.c  |    3 +++
 drivers/bluetooth/hci_qca.c   |    3 +++
 drivers/bluetooth/hci_uart.h  |    1 +
 7 files changed, 29 insertions(+)

--- a/drivers/bluetooth/hci_ath.c
+++ b/drivers/bluetooth/hci_ath.c
@@ -112,6 +112,9 @@ static int ath_open(struct hci_uart *hu)
 
 	BT_DBG("hu %p", hu);
 
+	if (!hci_uart_has_flow_control(hu))
+		return -EOPNOTSUPP;
+
 	ath = kzalloc(sizeof(*ath), GFP_KERNEL);
 	if (!ath)
 		return -ENOMEM;
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -369,6 +369,9 @@ static int bcm_open(struct hci_uart *hu)
 
 	bt_dev_dbg(hu->hdev, "hu %p", hu);
 
+	if (!hci_uart_has_flow_control(hu))
+		return -EOPNOTSUPP;
+
 	bcm = kzalloc(sizeof(*bcm), GFP_KERNEL);
 	if (!bcm)
 		return -ENOMEM;
--- a/drivers/bluetooth/hci_intel.c
+++ b/drivers/bluetooth/hci_intel.c
@@ -406,6 +406,9 @@ static int intel_open(struct hci_uart *h
 
 	BT_DBG("hu %p", hu);
 
+	if (!hci_uart_has_flow_control(hu))
+		return -EOPNOTSUPP;
+
 	intel = kzalloc(sizeof(*intel), GFP_KERNEL);
 	if (!intel)
 		return -ENOMEM;
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -299,6 +299,19 @@ static int hci_uart_send_frame(struct hc
 	return 0;
 }
 
+/* Check the underlying device or tty has flow control support */
+bool hci_uart_has_flow_control(struct hci_uart *hu)
+{
+	/* serdev nodes check if the needed operations are present */
+	if (hu->serdev)
+		return true;
+
+	if (hu->tty->driver->ops->tiocmget && hu->tty->driver->ops->tiocmset)
+		return true;
+
+	return false;
+}
+
 /* Flow control or un-flow control the device */
 void hci_uart_set_flow_control(struct hci_uart *hu, bool enable)
 {
--- a/drivers/bluetooth/hci_mrvl.c
+++ b/drivers/bluetooth/hci_mrvl.c
@@ -66,6 +66,9 @@ static int mrvl_open(struct hci_uart *hu
 
 	BT_DBG("hu %p", hu);
 
+	if (!hci_uart_has_flow_control(hu))
+		return -EOPNOTSUPP;
+
 	mrvl = kzalloc(sizeof(*mrvl), GFP_KERNEL);
 	if (!mrvl)
 		return -ENOMEM;
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -450,6 +450,9 @@ static int qca_open(struct hci_uart *hu)
 
 	BT_DBG("hu %p qca_open", hu);
 
+	if (!hci_uart_has_flow_control(hu))
+		return -EOPNOTSUPP;
+
 	qca = kzalloc(sizeof(struct qca_data), GFP_KERNEL);
 	if (!qca)
 		return -ENOMEM;
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -118,6 +118,7 @@ int hci_uart_tx_wakeup(struct hci_uart *
 int hci_uart_init_ready(struct hci_uart *hu);
 void hci_uart_init_work(struct work_struct *work);
 void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed);
+bool hci_uart_has_flow_control(struct hci_uart *hu);
 void hci_uart_set_flow_control(struct hci_uart *hu, bool enable);
 void hci_uart_set_speeds(struct hci_uart *hu, unsigned int init_speed,
 			 unsigned int oper_speed);

[PATCH 4.19 20/32] vhost: introduce vhost_exceeds_weight()

[Greg Kroah-Hartman]

From: Jason Wang <jasowang@redhat.com>

commit e82b9b0727ff6d665fff2d326162b460dded554d upstream.

We used to have vhost_exceeds_weight() for vhost-net to:

- prevent vhost kthread from hogging the cpu
- balance the time spent between TX and RX

This function could be useful for vsock and scsi as well. So move it
to vhost.c. Device must specify a weight which counts the number of
requests, or it can also specific a byte_weight which counts the
number of bytes that has been processed.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
[jwang: backport to 4.19, fix conflict in net.c]
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/vhost/net.c   |   22 ++++++----------------
 drivers/vhost/scsi.c  |    9 ++++++++-
 drivers/vhost/vhost.c |   20 +++++++++++++++++++-
 drivers/vhost/vhost.h |    5 ++++-
 drivers/vhost/vsock.c |   12 +++++++++++-
 5 files changed, 48 insertions(+), 20 deletions(-)

--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -497,12 +497,6 @@ static size_t init_iov_iter(struct vhost
 	return iov_iter_count(iter);
 }
 
-static bool vhost_exceeds_weight(int pkts, int total_len)
-{
-	return total_len >= VHOST_NET_WEIGHT ||
-	       pkts >= VHOST_NET_PKT_WEIGHT;
-}
-
 static int get_tx_bufs(struct vhost_net *net,
 		       struct vhost_net_virtqueue *nvq,
 		       struct msghdr *msg,
@@ -598,10 +592,8 @@ static void handle_tx_copy(struct vhost_
 				 err, len);
 		if (++nvq->done_idx >= VHOST_NET_BATCH)
 			vhost_net_signal_used(nvq);
-		if (vhost_exceeds_weight(++sent_pkts, total_len)) {
-			vhost_poll_queue(&vq->poll);
+		if (vhost_exceeds_weight(vq, ++sent_pkts, total_len))
 			break;
-		}
 	}
 
 	vhost_net_signal_used(nvq);
@@ -701,10 +693,9 @@ static void handle_tx_zerocopy(struct vh
 		else
 			vhost_zerocopy_signal_used(net, vq);
 		vhost_net_tx_packet(net);
-		if (unlikely(vhost_exceeds_weight(++sent_pkts, total_len))) {
-			vhost_poll_queue(&vq->poll);
+		if (unlikely(vhost_exceeds_weight(vq, ++sent_pkts,
+						  total_len)))
 			break;
-		}
 	}
 }
 
@@ -1027,10 +1018,8 @@ static void handle_rx(struct vhost_net *
 			vhost_log_write(vq, vq_log, log, vhost_len,
 					vq->iov, in);
 		total_len += vhost_len;
-		if (unlikely(vhost_exceeds_weight(++recv_pkts, total_len))) {
-			vhost_poll_queue(&vq->poll);
+		if (unlikely(vhost_exceeds_weight(vq, ++recv_pkts, total_len)))
 			goto out;
-		}
 	}
 	if (unlikely(busyloop_intr))
 		vhost_poll_queue(&vq->poll);
@@ -1115,7 +1104,8 @@ static int vhost_net_open(struct inode *
 		vhost_net_buf_init(&n->vqs[i].rxq);
 	}
 	vhost_dev_init(dev, vqs, VHOST_NET_VQ_MAX,
-		       UIO_MAXIOV + VHOST_NET_BATCH);
+		       UIO_MAXIOV + VHOST_NET_BATCH,
+		       VHOST_NET_WEIGHT, VHOST_NET_PKT_WEIGHT);
 
 	vhost_poll_init(n->poll + VHOST_NET_VQ_TX, handle_tx_net, EPOLLOUT, dev);
 	vhost_poll_init(n->poll + VHOST_NET_VQ_RX, handle_rx_net, EPOLLIN, dev);
--- a/drivers/vhost/scsi.c
+++ b/drivers/vhost/scsi.c
@@ -57,6 +57,12 @@
 #define VHOST_SCSI_PREALLOC_UPAGES 2048
 #define VHOST_SCSI_PREALLOC_PROT_SGLS 2048
 
+/* Max number of requests before requeueing the job.
+ * Using this limit prevents one virtqueue from starving others with
+ * request.
+ */
+#define VHOST_SCSI_WEIGHT 256
+
 struct vhost_scsi_inflight {
 	/* Wait for the flush operation to finish */
 	struct completion comp;
@@ -1398,7 +1404,8 @@ static int vhost_scsi_open(struct inode
 		vqs[i] = &vs->vqs[i].vq;
 		vs->vqs[i].vq.handle_kick = vhost_scsi_handle_kick;
 	}
-	vhost_dev_init(&vs->dev, vqs, VHOST_SCSI_MAX_VQ, UIO_MAXIOV);
+	vhost_dev_init(&vs->dev, vqs, VHOST_SCSI_MAX_VQ, UIO_MAXIOV,
+		       VHOST_SCSI_WEIGHT, 0);
 
 	vhost_scsi_init_inflight(vs, NULL);
 
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -413,8 +413,24 @@ static void vhost_dev_free_iovecs(struct
 		vhost_vq_free_iovecs(dev->vqs[i]);
 }
 
+bool vhost_exceeds_weight(struct vhost_virtqueue *vq,
+			  int pkts, int total_len)
+{
+	struct vhost_dev *dev = vq->dev;
+
+	if ((dev->byte_weight && total_len >= dev->byte_weight) ||
+	    pkts >= dev->weight) {
+		vhost_poll_queue(&vq->poll);
+		return true;
+	}
+
+	return false;
+}
+EXPORT_SYMBOL_GPL(vhost_exceeds_weight);
+
 void vhost_dev_init(struct vhost_dev *dev,
-		    struct vhost_virtqueue **vqs, int nvqs, int iov_limit)
+		    struct vhost_virtqueue **vqs, int nvqs,
+		    int iov_limit, int weight, int byte_weight)
 {
 	struct vhost_virtqueue *vq;
 	int i;
@@ -428,6 +444,8 @@ void vhost_dev_init(struct vhost_dev *de
 	dev->mm = NULL;
 	dev->worker = NULL;
 	dev->iov_limit = iov_limit;
+	dev->weight = weight;
+	dev->byte_weight = byte_weight;
 	init_llist_head(&dev->work_list);
 	init_waitqueue_head(&dev->wait);
 	INIT_LIST_HEAD(&dev->read_list);
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -171,10 +171,13 @@ struct vhost_dev {
 	struct list_head pending_list;
 	wait_queue_head_t wait;
 	int iov_limit;
+	int weight;
+	int byte_weight;
 };
 
+bool vhost_exceeds_weight(struct vhost_virtqueue *vq, int pkts, int total_len);
 void vhost_dev_init(struct vhost_dev *, struct vhost_virtqueue **vqs,
-		    int nvqs, int iov_limit);
+		    int nvqs, int iov_limit, int weight, int byte_weight);
 long vhost_dev_set_owner(struct vhost_dev *dev);
 bool vhost_dev_has_owner(struct vhost_dev *dev);
 long vhost_dev_check_owner(struct vhost_dev *);
--- a/drivers/vhost/vsock.c
+++ b/drivers/vhost/vsock.c
@@ -21,6 +21,14 @@
 #include "vhost.h"
 
 #define VHOST_VSOCK_DEFAULT_HOST_CID	2
+/* Max number of bytes transferred before requeueing the job.
+ * Using this limit prevents one virtqueue from starving others. */
+#define VHOST_VSOCK_WEIGHT 0x80000
+/* Max number of packets transferred before requeueing the job.
+ * Using this limit prevents one virtqueue from starving others with
+ * small pkts.
+ */
+#define VHOST_VSOCK_PKT_WEIGHT 256
 
 enum {
 	VHOST_VSOCK_FEATURES = VHOST_FEATURES,
@@ -531,7 +539,9 @@ static int vhost_vsock_dev_open(struct i
 	vsock->vqs[VSOCK_VQ_TX].handle_kick = vhost_vsock_handle_tx_kick;
 	vsock->vqs[VSOCK_VQ_RX].handle_kick = vhost_vsock_handle_rx_kick;
 
-	vhost_dev_init(&vsock->dev, vqs, ARRAY_SIZE(vsock->vqs), UIO_MAXIOV);
+	vhost_dev_init(&vsock->dev, vqs, ARRAY_SIZE(vsock->vqs),
+		       UIO_MAXIOV, VHOST_VSOCK_PKT_WEIGHT,
+		       VHOST_VSOCK_WEIGHT);
 
 	file->private_data = vsock;
 	spin_lock_init(&vsock->send_pkt_list_lock);

[PATCH 4.19 21/32] vhost_net: fix possible infinite loop

[Greg Kroah-Hartman]

From: Jason Wang <jasowang@redhat.com>

commit e2412c07f8f3040593dfb88207865a3cd58680c0 upstream.

When the rx buffer is too small for a packet, we will discard the vq
descriptor and retry it for the next packet:

while ((sock_len = vhost_net_rx_peek_head_len(net, sock->sk,
					      &busyloop_intr))) {
...
	/* On overrun, truncate and discard */
	if (unlikely(headcount > UIO_MAXIOV)) {
		iov_iter_init(&msg.msg_iter, READ, vq->iov, 1, 1);
		err = sock->ops->recvmsg(sock, &msg,
					 1, MSG_DONTWAIT | MSG_TRUNC);
		pr_debug("Discarded rx packet: len %zd\n", sock_len);
		continue;
	}
...
}

This makes it possible to trigger a infinite while..continue loop
through the co-opreation of two VMs like:

1) Malicious VM1 allocate 1 byte rx buffer and try to slow down the
   vhost process as much as possible e.g using indirect descriptors or
   other.
2) Malicious VM2 generate packets to VM1 as fast as possible

Fixing this by checking against weight at the end of RX and TX
loop. This also eliminate other similar cases when:

- userspace is consuming the packets in the meanwhile
- theoretical TOCTOU attack if guest moving avail index back and forth
  to hit the continue after vhost find guest just add new buffers

This addresses CVE-2019-3900.

Fixes: d8316f3991d20 ("vhost: fix total length when packets are too short")
Fixes: 3a4d5c94e9593 ("vhost_net: a kernel-level virtio server")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
[jwang: backport to 4.19]
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/vhost/net.c |   29 +++++++++++++----------------
 1 file changed, 13 insertions(+), 16 deletions(-)

--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -551,7 +551,7 @@ static void handle_tx_copy(struct vhost_
 	int err;
 	int sent_pkts = 0;
 
-	for (;;) {
+	do {
 		bool busyloop_intr = false;
 
 		head = get_tx_bufs(net, nvq, &msg, &out, &in, &len,
@@ -592,9 +592,7 @@ static void handle_tx_copy(struct vhost_
 				 err, len);
 		if (++nvq->done_idx >= VHOST_NET_BATCH)
 			vhost_net_signal_used(nvq);
-		if (vhost_exceeds_weight(vq, ++sent_pkts, total_len))
-			break;
-	}
+	} while (likely(!vhost_exceeds_weight(vq, ++sent_pkts, total_len)));
 
 	vhost_net_signal_used(nvq);
 }
@@ -618,7 +616,7 @@ static void handle_tx_zerocopy(struct vh
 	bool zcopy_used;
 	int sent_pkts = 0;
 
-	for (;;) {
+	do {
 		bool busyloop_intr;
 
 		/* Release DMAs done buffers first */
@@ -693,10 +691,7 @@ static void handle_tx_zerocopy(struct vh
 		else
 			vhost_zerocopy_signal_used(net, vq);
 		vhost_net_tx_packet(net);
-		if (unlikely(vhost_exceeds_weight(vq, ++sent_pkts,
-						  total_len)))
-			break;
-	}
+	} while (likely(!vhost_exceeds_weight(vq, ++sent_pkts, total_len)));
 }
 
 /* Expects to be always run from workqueue - which acts as
@@ -932,8 +927,11 @@ static void handle_rx(struct vhost_net *
 		vq->log : NULL;
 	mergeable = vhost_has_feature(vq, VIRTIO_NET_F_MRG_RXBUF);
 
-	while ((sock_len = vhost_net_rx_peek_head_len(net, sock->sk,
-						      &busyloop_intr))) {
+	do {
+		sock_len = vhost_net_rx_peek_head_len(net, sock->sk,
+						      &busyloop_intr);
+		if (!sock_len)
+			break;
 		sock_len += sock_hlen;
 		vhost_len = sock_len + vhost_hlen;
 		headcount = get_rx_bufs(vq, vq->heads + nvq->done_idx,
@@ -1018,12 +1016,11 @@ static void handle_rx(struct vhost_net *
 			vhost_log_write(vq, vq_log, log, vhost_len,
 					vq->iov, in);
 		total_len += vhost_len;
-		if (unlikely(vhost_exceeds_weight(vq, ++recv_pkts, total_len)))
-			goto out;
-	}
+	} while (likely(!vhost_exceeds_weight(vq, ++recv_pkts, total_len)));
+
 	if (unlikely(busyloop_intr))
 		vhost_poll_queue(&vq->poll);
-	else
+	else if (!sock_len)
 		vhost_net_enable_vq(net, vq);
 out:
 	vhost_net_signal_used(nvq);
@@ -1105,7 +1102,7 @@ static int vhost_net_open(struct inode *
 	}
 	vhost_dev_init(dev, vqs, VHOST_NET_VQ_MAX,
 		       UIO_MAXIOV + VHOST_NET_BATCH,
-		       VHOST_NET_WEIGHT, VHOST_NET_PKT_WEIGHT);
+		       VHOST_NET_PKT_WEIGHT, VHOST_NET_WEIGHT);
 
 	vhost_poll_init(n->poll + VHOST_NET_VQ_TX, handle_tx_net, EPOLLOUT, dev);
 	vhost_poll_init(n->poll + VHOST_NET_VQ_RX, handle_rx_net, EPOLLIN, dev);

Re: [PATCH 4.19 21/32] vhost_net: fix possible infinite loop

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 2265 bytes --]

Hi!

> This makes it possible to trigger a infinite while..continue loop
> through the co-opreation of two VMs like:
> 
> 1) Malicious VM1 allocate 1 byte rx buffer and try to slow down the
>    vhost process as much as possible e.g using indirect descriptors or
>    other.
> 2) Malicious VM2 generate packets to VM1 as fast as possible
> 
> Fixing this by checking against weight at the end of RX and TX
> loop. This also eliminate other similar cases when:
> 
> - userspace is consuming the packets in the meanwhile
> - theoretical TOCTOU attack if guest moving avail index back and forth
>   to hit the continue after vhost find guest just add new buffers
> 
> This addresses CVE-2019-3900.
> 

> @@ -551,7 +551,7 @@ static void handle_tx_copy(struct vhost_
>  	int err;
>  	int sent_pkts = 0;
>  
> -	for (;;) {
> +	do {
>  		bool busyloop_intr = false;
>  
>  		head = get_tx_bufs(net, nvq, &msg, &out, &in, &len,
> @@ -592,9 +592,7 @@ static void handle_tx_copy(struct vhost_
>  				 err, len);
>  		if (++nvq->done_idx >= VHOST_NET_BATCH)
>  			vhost_net_signal_used(nvq);
> -		if (vhost_exceeds_weight(vq, ++sent_pkts, total_len))
> -			break;
> -	}
> +	} while (likely(!vhost_exceeds_weight(vq, ++sent_pkts, total_len)));
>  
>  	vhost_net_signal_used(nvq);
>  }

So this part does not really change anything, right?

> @@ -618,7 +616,7 @@ static void handle_tx_zerocopy(struct vh
>  	bool zcopy_used;
>  	int sent_pkts = 0;
>  
> -	for (;;) {
> +	do {
>  		bool busyloop_intr;
>  
>  		/* Release DMAs done buffers first */
> @@ -693,10 +691,7 @@ static void handle_tx_zerocopy(struct vh
>  		else
>  			vhost_zerocopy_signal_used(net, vq);
>  		vhost_net_tx_packet(net);
> -		if (unlikely(vhost_exceeds_weight(vq, ++sent_pkts,
> -						  total_len)))
> -			break;
> -	}
> +	} while (likely(!vhost_exceeds_weight(vq, ++sent_pkts, total_len)));
>  }
>  
>  /* Expects to be always run from workqueue - which acts as

Neither does this. Equivalent code. Changelog says it fixes something
for the transmit so... is that intentional?

									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH 4.19 21/32] vhost_net: fix possible infinite loop

[Jason Wang]

On 2019/8/4 上午5:49, Pavel Machek wrote:
> Hi!
>
>> This makes it possible to trigger a infinite while..continue loop
>> through the co-opreation of two VMs like:
>>
>> 1) Malicious VM1 allocate 1 byte rx buffer and try to slow down the
>>     vhost process as much as possible e.g using indirect descriptors or
>>     other.
>> 2) Malicious VM2 generate packets to VM1 as fast as possible
>>
>> Fixing this by checking against weight at the end of RX and TX
>> loop. This also eliminate other similar cases when:
>>
>> - userspace is consuming the packets in the meanwhile
>> - theoretical TOCTOU attack if guest moving avail index back and forth
>>    to hit the continue after vhost find guest just add new buffers
>>
>> This addresses CVE-2019-3900.
>>
>> @@ -551,7 +551,7 @@ static void handle_tx_copy(struct vhost_
>>   	int err;
>>   	int sent_pkts = 0;
>>   
>> -	for (;;) {
>> +	do {
>>   		bool busyloop_intr = false;
>>   
>>   		head = get_tx_bufs(net, nvq, &msg, &out, &in, &len,
>> @@ -592,9 +592,7 @@ static void handle_tx_copy(struct vhost_
>>   				 err, len);
>>   		if (++nvq->done_idx >= VHOST_NET_BATCH)
>>   			vhost_net_signal_used(nvq);
>> -		if (vhost_exceeds_weight(vq, ++sent_pkts, total_len))
>> -			break;
>> -	}
>> +	} while (likely(!vhost_exceeds_weight(vq, ++sent_pkts, total_len)));
>>   
>>   	vhost_net_signal_used(nvq);
>>   }
> So this part does not really change anything, right?


Nope, if you check the loop you can see we used to use "continue" inside 
the loop which may bypass the check:


         head = get_tx_bufs(net, nvq, &msg, &out, &in, &len,
                    &busyloop_intr);
         /* On error, stop handling until the next kick. */
         if (unlikely(head < 0))
             break;
         /* Nothing new?  Wait for eventfd to tell us they refilled. */
         if (head == vq->num) {
             if (unlikely(busyloop_intr)) {
                 vhost_poll_queue(&vq->poll);
             } else if (unlikely(vhost_enable_notify(&net->dev,
                                 vq))) {
                 vhost_disable_notify(&net->dev, vq);
                 continue;
             }
             break;
         }


>
>> @@ -618,7 +616,7 @@ static void handle_tx_zerocopy(struct vh
>>   	bool zcopy_used;
>>   	int sent_pkts = 0;
>>   
>> -	for (;;) {
>> +	do {
>>   		bool busyloop_intr;
>>   
>>   		/* Release DMAs done buffers first */
>> @@ -693,10 +691,7 @@ static void handle_tx_zerocopy(struct vh
>>   		else
>>   			vhost_zerocopy_signal_used(net, vq);
>>   		vhost_net_tx_packet(net);
>> -		if (unlikely(vhost_exceeds_weight(vq, ++sent_pkts,
>> -						  total_len)))
>> -			break;
>> -	}
>> +	} while (likely(!vhost_exceeds_weight(vq, ++sent_pkts, total_len)));
>>   }
>>   
>>   /* Expects to be always run from workqueue - which acts as
> Neither does this. Equivalent code. Changelog says it fixes something
> for the transmit so... is that intentional?
>
> 									Pavel


The same as above. So yes.

Thanks

[PATCH 4.19 22/32] vhost: vsock: add weight support

[Greg Kroah-Hartman]

From: Jason Wang <jasowang@redhat.com>

commit e79b431fb901ba1106670bcc80b9b617b25def7d upstream.

This patch will check the weight and exit the loop if we exceeds the
weight. This is useful for preventing vsock kthread from hogging cpu
which is guest triggerable. The weight can help to avoid starving the
request from on direction while another direction is being processed.

The value of weight is picked from vhost-net.

This addresses CVE-2019-3900.

Cc: Stefan Hajnoczi <stefanha@redhat.com>
Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/vhost/vsock.c |   16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

--- a/drivers/vhost/vsock.c
+++ b/drivers/vhost/vsock.c
@@ -86,6 +86,7 @@ vhost_transport_do_send_pkt(struct vhost
 			    struct vhost_virtqueue *vq)
 {
 	struct vhost_virtqueue *tx_vq = &vsock->vqs[VSOCK_VQ_TX];
+	int pkts = 0, total_len = 0;
 	bool added = false;
 	bool restart_tx = false;
 
@@ -97,7 +98,7 @@ vhost_transport_do_send_pkt(struct vhost
 	/* Avoid further vmexits, we're already processing the virtqueue */
 	vhost_disable_notify(&vsock->dev, vq);
 
-	for (;;) {
+	do {
 		struct virtio_vsock_pkt *pkt;
 		struct iov_iter iov_iter;
 		unsigned out, in;
@@ -182,8 +183,9 @@ vhost_transport_do_send_pkt(struct vhost
 		 */
 		virtio_transport_deliver_tap_pkt(pkt);
 
+		total_len += pkt->len;
 		virtio_transport_free_pkt(pkt);
-	}
+	} while(likely(!vhost_exceeds_weight(vq, ++pkts, total_len)));
 	if (added)
 		vhost_signal(&vsock->dev, vq);
 
@@ -358,7 +360,7 @@ static void vhost_vsock_handle_tx_kick(s
 	struct vhost_vsock *vsock = container_of(vq->dev, struct vhost_vsock,
 						 dev);
 	struct virtio_vsock_pkt *pkt;
-	int head;
+	int head, pkts = 0, total_len = 0;
 	unsigned int out, in;
 	bool added = false;
 
@@ -368,7 +370,7 @@ static void vhost_vsock_handle_tx_kick(s
 		goto out;
 
 	vhost_disable_notify(&vsock->dev, vq);
-	for (;;) {
+	do {
 		u32 len;
 
 		if (!vhost_vsock_more_replies(vsock)) {
@@ -409,9 +411,11 @@ static void vhost_vsock_handle_tx_kick(s
 		else
 			virtio_transport_free_pkt(pkt);
 
-		vhost_add_used(vq, head, sizeof(pkt->hdr) + len);
+		len += sizeof(pkt->hdr);
+		vhost_add_used(vq, head, len);
+		total_len += len;
 		added = true;
-	}
+	} while(likely(!vhost_exceeds_weight(vq, ++pkts, total_len)));
 
 no_more_replies:
 	if (added)

[PATCH 4.19 23/32] vhost: scsi: add weight support

[Greg Kroah-Hartman]

From: Jason Wang <jasowang@redhat.com>

commit c1ea02f15ab5efb3e93fc3144d895410bf79fcf2 upstream.

This patch will check the weight and exit the loop if we exceeds the
weight. This is useful for preventing scsi kthread from hogging cpu
which is guest triggerable.

This addresses CVE-2019-3900.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Fixes: 057cbf49a1f0 ("tcm_vhost: Initial merge for vhost level target fabric driver")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[jwang: backport to 4.19]
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/vhost/scsi.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/vhost/scsi.c
+++ b/drivers/vhost/scsi.c
@@ -817,7 +817,7 @@ vhost_scsi_handle_vq(struct vhost_scsi *
 	u64 tag;
 	u32 exp_data_len, data_direction;
 	unsigned int out = 0, in = 0;
-	int head, ret, prot_bytes;
+	int head, ret, prot_bytes, c = 0;
 	size_t req_size, rsp_size = sizeof(struct virtio_scsi_cmd_resp);
 	size_t out_size, in_size;
 	u16 lun;
@@ -836,7 +836,7 @@ vhost_scsi_handle_vq(struct vhost_scsi *
 
 	vhost_disable_notify(&vs->dev, vq);
 
-	for (;;) {
+	do {
 		head = vhost_get_vq_desc(vq, vq->iov,
 					 ARRAY_SIZE(vq->iov), &out, &in,
 					 NULL, NULL);
@@ -1051,7 +1051,7 @@ vhost_scsi_handle_vq(struct vhost_scsi *
 		 */
 		INIT_WORK(&cmd->work, vhost_scsi_submission_work);
 		queue_work(vhost_scsi_workqueue, &cmd->work);
-	}
+	} while (likely(!vhost_exceeds_weight(vq, ++c, 0)));
 out:
 	mutex_unlock(&vq->mutex);
 }

[PATCH 4.19 24/32] sched/fair: Dont free p->numa_faults with concurrent readers

[Greg Kroah-Hartman]

From: Jann Horn <jannh@google.com>

commit 16d51a590a8ce3befb1308e0e7ab77f3b661af33 upstream.

When going through execve(), zero out the NUMA fault statistics instead of
freeing them.

During execve, the task is reachable through procfs and the scheduler. A
concurrent /proc/*/sched reader can read data from a freed ->numa_faults
allocation (confirmed by KASAN) and write it back to userspace.
I believe that it would also be possible for a use-after-free read to occur
through a race between a NUMA fault and execve(): task_numa_fault() can
lead to task_numa_compare(), which invokes task_weight() on the currently
running task of a different CPU.

Another way to fix this would be to make ->numa_faults RCU-managed or add
extra locking, but it seems easier to wipe the NUMA fault statistics on
execve.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Fixes: 82727018b0d3 ("sched/numa: Call task_numa_free() from do_execve()")
Link: https://lkml.kernel.org/r/20190716152047.14424-1-jannh@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/exec.c                            |    2 +-
 include/linux/sched/numa_balancing.h |    4 ++--
 kernel/fork.c                        |    2 +-
 kernel/sched/fair.c                  |   24 ++++++++++++++++++++----
 4 files changed, 24 insertions(+), 8 deletions(-)

--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1826,7 +1826,7 @@ static int __do_execve_file(int fd, stru
 	membarrier_execve(current);
 	rseq_execve(current);
 	acct_update_integrals(current);
-	task_numa_free(current);
+	task_numa_free(current, false);
 	free_bprm(bprm);
 	kfree(pathbuf);
 	if (filename)
--- a/include/linux/sched/numa_balancing.h
+++ b/include/linux/sched/numa_balancing.h
@@ -19,7 +19,7 @@
 extern void task_numa_fault(int last_node, int node, int pages, int flags);
 extern pid_t task_numa_group_id(struct task_struct *p);
 extern void set_numabalancing_state(bool enabled);
-extern void task_numa_free(struct task_struct *p);
+extern void task_numa_free(struct task_struct *p, bool final);
 extern bool should_numa_migrate_memory(struct task_struct *p, struct page *page,
 					int src_nid, int dst_cpu);
 #else
@@ -34,7 +34,7 @@ static inline pid_t task_numa_group_id(s
 static inline void set_numabalancing_state(bool enabled)
 {
 }
-static inline void task_numa_free(struct task_struct *p)
+static inline void task_numa_free(struct task_struct *p, bool final)
 {
 }
 static inline bool should_numa_migrate_memory(struct task_struct *p,
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -679,7 +679,7 @@ void __put_task_struct(struct task_struc
 	WARN_ON(tsk == current);
 
 	cgroup_free(tsk);
-	task_numa_free(tsk);
+	task_numa_free(tsk, true);
 	security_task_free(tsk);
 	exit_creds(tsk);
 	delayacct_tsk_free(tsk);
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -2345,13 +2345,23 @@ no_join:
 	return;
 }
 
-void task_numa_free(struct task_struct *p)
+/*
+ * Get rid of NUMA staticstics associated with a task (either current or dead).
+ * If @final is set, the task is dead and has reached refcount zero, so we can
+ * safely free all relevant data structures. Otherwise, there might be
+ * concurrent reads from places like load balancing and procfs, and we should
+ * reset the data back to default state without freeing ->numa_faults.
+ */
+void task_numa_free(struct task_struct *p, bool final)
 {
 	struct numa_group *grp = p->numa_group;
-	void *numa_faults = p->numa_faults;
+	unsigned long *numa_faults = p->numa_faults;
 	unsigned long flags;
 	int i;
 
+	if (!numa_faults)
+		return;
+
 	if (grp) {
 		spin_lock_irqsave(&grp->lock, flags);
 		for (i = 0; i < NR_NUMA_HINT_FAULT_STATS * nr_node_ids; i++)
@@ -2364,8 +2374,14 @@ void task_numa_free(struct task_struct *
 		put_numa_group(grp);
 	}
 
-	p->numa_faults = NULL;
-	kfree(numa_faults);
+	if (final) {
+		p->numa_faults = NULL;
+		kfree(numa_faults);
+	} else {
+		p->total_numa_faults = 0;
+		for (i = 0; i < NR_NUMA_HINT_FAULT_STATS * nr_node_ids; i++)
+			numa_faults[i] = 0;
+	}
 }
 
 /*

[PATCH 4.19 25/32] sched/fair: Use RCU accessors consistently for ->numa_group

[Greg Kroah-Hartman]

From: Jann Horn <jannh@google.com>

commit cb361d8cdef69990f6b4504dc1fd9a594d983c97 upstream.

The old code used RCU annotations and accessors inconsistently for
->numa_group, which can lead to use-after-frees and NULL dereferences.

Let all accesses to ->numa_group use proper RCU helpers to prevent such
issues.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Fixes: 8c8a743c5087 ("sched/numa: Use {cpu, pid} to create task groups for shared faults")
Link: https://lkml.kernel.org/r/20190716152047.14424-3-jannh@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/sched.h |   10 +++-
 kernel/sched/fair.c   |  120 +++++++++++++++++++++++++++++++++-----------------
 2 files changed, 90 insertions(+), 40 deletions(-)

--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1023,7 +1023,15 @@ struct task_struct {
 	u64				last_sum_exec_runtime;
 	struct callback_head		numa_work;
 
-	struct numa_group		*numa_group;
+	/*
+	 * This pointer is only modified for current in syscall and
+	 * pagefault context (and for tasks being destroyed), so it can be read
+	 * from any of the following contexts:
+	 *  - RCU read-side critical section
+	 *  - current->numa_group from everywhere
+	 *  - task's runqueue locked, task not running
+	 */
+	struct numa_group __rcu		*numa_group;
 
 	/*
 	 * numa_faults is an array split into four regions:
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -1053,6 +1053,21 @@ struct numa_group {
 	unsigned long faults[0];
 };
 
+/*
+ * For functions that can be called in multiple contexts that permit reading
+ * ->numa_group (see struct task_struct for locking rules).
+ */
+static struct numa_group *deref_task_numa_group(struct task_struct *p)
+{
+	return rcu_dereference_check(p->numa_group, p == current ||
+		(lockdep_is_held(&task_rq(p)->lock) && !READ_ONCE(p->on_cpu)));
+}
+
+static struct numa_group *deref_curr_numa_group(struct task_struct *p)
+{
+	return rcu_dereference_protected(p->numa_group, p == current);
+}
+
 static inline unsigned long group_faults_priv(struct numa_group *ng);
 static inline unsigned long group_faults_shared(struct numa_group *ng);
 
@@ -1096,10 +1111,12 @@ static unsigned int task_scan_start(stru
 {
 	unsigned long smin = task_scan_min(p);
 	unsigned long period = smin;
+	struct numa_group *ng;
 
 	/* Scale the maximum scan period with the amount of shared memory. */
-	if (p->numa_group) {
-		struct numa_group *ng = p->numa_group;
+	rcu_read_lock();
+	ng = rcu_dereference(p->numa_group);
+	if (ng) {
 		unsigned long shared = group_faults_shared(ng);
 		unsigned long private = group_faults_priv(ng);
 
@@ -1107,6 +1124,7 @@ static unsigned int task_scan_start(stru
 		period *= shared + 1;
 		period /= private + shared + 1;
 	}
+	rcu_read_unlock();
 
 	return max(smin, period);
 }
@@ -1115,13 +1133,14 @@ static unsigned int task_scan_max(struct
 {
 	unsigned long smin = task_scan_min(p);
 	unsigned long smax;
+	struct numa_group *ng;
 
 	/* Watch for min being lower than max due to floor calculations */
 	smax = sysctl_numa_balancing_scan_period_max / task_nr_scan_windows(p);
 
 	/* Scale the maximum scan period with the amount of shared memory. */
-	if (p->numa_group) {
-		struct numa_group *ng = p->numa_group;
+	ng = deref_curr_numa_group(p);
+	if (ng) {
 		unsigned long shared = group_faults_shared(ng);
 		unsigned long private = group_faults_priv(ng);
 		unsigned long period = smax;
@@ -1153,7 +1172,7 @@ void init_numa_balancing(unsigned long c
 	p->numa_scan_period		= sysctl_numa_balancing_scan_delay;
 	p->numa_work.next		= &p->numa_work;
 	p->numa_faults			= NULL;
-	p->numa_group			= NULL;
+	RCU_INIT_POINTER(p->numa_group, NULL);
 	p->last_task_numa_placement	= 0;
 	p->last_sum_exec_runtime	= 0;
 
@@ -1200,7 +1219,16 @@ static void account_numa_dequeue(struct
 
 pid_t task_numa_group_id(struct task_struct *p)
 {
-	return p->numa_group ? p->numa_group->gid : 0;
+	struct numa_group *ng;
+	pid_t gid = 0;
+
+	rcu_read_lock();
+	ng = rcu_dereference(p->numa_group);
+	if (ng)
+		gid = ng->gid;
+	rcu_read_unlock();
+
+	return gid;
 }
 
 /*
@@ -1225,11 +1253,13 @@ static inline unsigned long task_faults(
 
 static inline unsigned long group_faults(struct task_struct *p, int nid)
 {
-	if (!p->numa_group)
+	struct numa_group *ng = deref_task_numa_group(p);
+
+	if (!ng)
 		return 0;
 
-	return p->numa_group->faults[task_faults_idx(NUMA_MEM, nid, 0)] +
-		p->numa_group->faults[task_faults_idx(NUMA_MEM, nid, 1)];
+	return ng->faults[task_faults_idx(NUMA_MEM, nid, 0)] +
+		ng->faults[task_faults_idx(NUMA_MEM, nid, 1)];
 }
 
 static inline unsigned long group_faults_cpu(struct numa_group *group, int nid)
@@ -1367,12 +1397,13 @@ static inline unsigned long task_weight(
 static inline unsigned long group_weight(struct task_struct *p, int nid,
 					 int dist)
 {
+	struct numa_group *ng = deref_task_numa_group(p);
 	unsigned long faults, total_faults;
 
-	if (!p->numa_group)
+	if (!ng)
 		return 0;
 
-	total_faults = p->numa_group->total_faults;
+	total_faults = ng->total_faults;
 
 	if (!total_faults)
 		return 0;
@@ -1386,7 +1417,7 @@ static inline unsigned long group_weight
 bool should_numa_migrate_memory(struct task_struct *p, struct page * page,
 				int src_nid, int dst_cpu)
 {
-	struct numa_group *ng = p->numa_group;
+	struct numa_group *ng = deref_curr_numa_group(p);
 	int dst_nid = cpu_to_node(dst_cpu);
 	int last_cpupid, this_cpupid;
 
@@ -1592,13 +1623,14 @@ static bool load_too_imbalanced(long src
 static void task_numa_compare(struct task_numa_env *env,
 			      long taskimp, long groupimp, bool maymove)
 {
+	struct numa_group *cur_ng, *p_ng = deref_curr_numa_group(env->p);
 	struct rq *dst_rq = cpu_rq(env->dst_cpu);
+	long imp = p_ng ? groupimp : taskimp;
 	struct task_struct *cur;
 	long src_load, dst_load;
-	long load;
-	long imp = env->p->numa_group ? groupimp : taskimp;
-	long moveimp = imp;
 	int dist = env->dist;
+	long moveimp = imp;
+	long load;
 
 	if (READ_ONCE(dst_rq->numa_migrate_on))
 		return;
@@ -1637,21 +1669,22 @@ static void task_numa_compare(struct tas
 	 * If dst and source tasks are in the same NUMA group, or not
 	 * in any group then look only at task weights.
 	 */
-	if (cur->numa_group == env->p->numa_group) {
+	cur_ng = rcu_dereference(cur->numa_group);
+	if (cur_ng == p_ng) {
 		imp = taskimp + task_weight(cur, env->src_nid, dist) -
 		      task_weight(cur, env->dst_nid, dist);
 		/*
 		 * Add some hysteresis to prevent swapping the
 		 * tasks within a group over tiny differences.
 		 */
-		if (cur->numa_group)
+		if (cur_ng)
 			imp -= imp / 16;
 	} else {
 		/*
 		 * Compare the group weights. If a task is all by itself
 		 * (not part of a group), use the task weight instead.
 		 */
-		if (cur->numa_group && env->p->numa_group)
+		if (cur_ng && p_ng)
 			imp += group_weight(cur, env->src_nid, dist) -
 			       group_weight(cur, env->dst_nid, dist);
 		else
@@ -1749,11 +1782,12 @@ static int task_numa_migrate(struct task
 		.best_imp = 0,
 		.best_cpu = -1,
 	};
+	unsigned long taskweight, groupweight;
 	struct sched_domain *sd;
+	long taskimp, groupimp;
+	struct numa_group *ng;
 	struct rq *best_rq;
-	unsigned long taskweight, groupweight;
 	int nid, ret, dist;
-	long taskimp, groupimp;
 
 	/*
 	 * Pick the lowest SD_NUMA domain, as that would have the smallest
@@ -1799,7 +1833,8 @@ static int task_numa_migrate(struct task
 	 *   multiple NUMA nodes; in order to better consolidate the group,
 	 *   we need to check other locations.
 	 */
-	if (env.best_cpu == -1 || (p->numa_group && p->numa_group->active_nodes > 1)) {
+	ng = deref_curr_numa_group(p);
+	if (env.best_cpu == -1 || (ng && ng->active_nodes > 1)) {
 		for_each_online_node(nid) {
 			if (nid == env.src_nid || nid == p->numa_preferred_nid)
 				continue;
@@ -1832,7 +1867,7 @@ static int task_numa_migrate(struct task
 	 * A task that migrated to a second choice node will be better off
 	 * trying for a better one later. Do not set the preferred node here.
 	 */
-	if (p->numa_group) {
+	if (ng) {
 		if (env.best_cpu == -1)
 			nid = env.src_nid;
 		else
@@ -2127,6 +2162,7 @@ static void task_numa_placement(struct t
 	unsigned long total_faults;
 	u64 runtime, period;
 	spinlock_t *group_lock = NULL;
+	struct numa_group *ng;
 
 	/*
 	 * The p->mm->numa_scan_seq field gets updated without
@@ -2144,8 +2180,9 @@ static void task_numa_placement(struct t
 	runtime = numa_get_avg_runtime(p, &period);
 
 	/* If the task is part of a group prevent parallel updates to group stats */
-	if (p->numa_group) {
-		group_lock = &p->numa_group->lock;
+	ng = deref_curr_numa_group(p);
+	if (ng) {
+		group_lock = &ng->lock;
 		spin_lock_irq(group_lock);
 	}
 
@@ -2186,7 +2223,7 @@ static void task_numa_placement(struct t
 			p->numa_faults[cpu_idx] += f_diff;
 			faults += p->numa_faults[mem_idx];
 			p->total_numa_faults += diff;
-			if (p->numa_group) {
+			if (ng) {
 				/*
 				 * safe because we can only change our own group
 				 *
@@ -2194,14 +2231,14 @@ static void task_numa_placement(struct t
 				 * nid and priv in a specific region because it
 				 * is at the beginning of the numa_faults array.
 				 */
-				p->numa_group->faults[mem_idx] += diff;
-				p->numa_group->faults_cpu[mem_idx] += f_diff;
-				p->numa_group->total_faults += diff;
-				group_faults += p->numa_group->faults[mem_idx];
+				ng->faults[mem_idx] += diff;
+				ng->faults_cpu[mem_idx] += f_diff;
+				ng->total_faults += diff;
+				group_faults += ng->faults[mem_idx];
 			}
 		}
 
-		if (!p->numa_group) {
+		if (!ng) {
 			if (faults > max_faults) {
 				max_faults = faults;
 				max_nid = nid;
@@ -2212,8 +2249,8 @@ static void task_numa_placement(struct t
 		}
 	}
 
-	if (p->numa_group) {
-		numa_group_count_active_nodes(p->numa_group);
+	if (ng) {
+		numa_group_count_active_nodes(ng);
 		spin_unlock_irq(group_lock);
 		max_nid = preferred_group_nid(p, max_nid);
 	}
@@ -2247,7 +2284,7 @@ static void task_numa_group(struct task_
 	int cpu = cpupid_to_cpu(cpupid);
 	int i;
 
-	if (unlikely(!p->numa_group)) {
+	if (unlikely(!deref_curr_numa_group(p))) {
 		unsigned int size = sizeof(struct numa_group) +
 				    4*nr_node_ids*sizeof(unsigned long);
 
@@ -2283,7 +2320,7 @@ static void task_numa_group(struct task_
 	if (!grp)
 		goto no_join;
 
-	my_grp = p->numa_group;
+	my_grp = deref_curr_numa_group(p);
 	if (grp == my_grp)
 		goto no_join;
 
@@ -2354,7 +2391,8 @@ no_join:
  */
 void task_numa_free(struct task_struct *p, bool final)
 {
-	struct numa_group *grp = p->numa_group;
+	/* safe: p either is current or is being freed by current */
+	struct numa_group *grp = rcu_dereference_raw(p->numa_group);
 	unsigned long *numa_faults = p->numa_faults;
 	unsigned long flags;
 	int i;
@@ -2434,7 +2472,7 @@ void task_numa_fault(int last_cpupid, in
 	 * actively using should be counted as local. This allows the
 	 * scan rate to slow down when a workload has settled down.
 	 */
-	ng = p->numa_group;
+	ng = deref_curr_numa_group(p);
 	if (!priv && !local && ng && ng->active_nodes > 1 &&
 				numa_is_active_node(cpu_node, ng) &&
 				numa_is_active_node(mem_node, ng))
@@ -10234,18 +10272,22 @@ void show_numa_stats(struct task_struct
 {
 	int node;
 	unsigned long tsf = 0, tpf = 0, gsf = 0, gpf = 0;
+	struct numa_group *ng;
 
+	rcu_read_lock();
+	ng = rcu_dereference(p->numa_group);
 	for_each_online_node(node) {
 		if (p->numa_faults) {
 			tsf = p->numa_faults[task_faults_idx(NUMA_MEM, node, 0)];
 			tpf = p->numa_faults[task_faults_idx(NUMA_MEM, node, 1)];
 		}
-		if (p->numa_group) {
-			gsf = p->numa_group->faults[task_faults_idx(NUMA_MEM, node, 0)],
-			gpf = p->numa_group->faults[task_faults_idx(NUMA_MEM, node, 1)];
+		if (ng) {
+			gsf = ng->faults[task_faults_idx(NUMA_MEM, node, 0)],
+			gpf = ng->faults[task_faults_idx(NUMA_MEM, node, 1)];
 		}
 		print_numa_stats(m, node, tsf, tpf, gsf, gpf);
 	}
+	rcu_read_unlock();
 }
 #endif /* CONFIG_NUMA_BALANCING */
 #endif /* CONFIG_SCHED_DEBUG */

[PATCH 4.19 26/32] /proc/<pid>/cmdline: remove all the special cases

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit 3d712546d8ba9f25cdf080d79f90482aa4231ed4 upstream.

Start off with a clean slate that only reads exactly from arg_start to
arg_end, without any oddities.  This simplifies the code and in the
process removes the case that caused us to potentially leak an
uninitialized byte from the temporary kernel buffer.

Note that in order to start from scratch with an understandable base,
this simplifies things _too_ much, and removes all the legacy logic to
handle setproctitle() having changed the argument strings.

We'll add back those special cases very differently in the next commit.

Link: https://lore.kernel.org/lkml/20190712160913.17727-1-izbyshev@ispras.ru/
Fixes: f5b65348fd77 ("proc: fix missing final NUL in get_mm_cmdline() rewrite")
Cc: Alexey Izbyshev <izbyshev@ispras.ru>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/proc/base.c |   71 ++++++---------------------------------------------------
 1 file changed, 8 insertions(+), 63 deletions(-)

--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -208,7 +208,7 @@ static int proc_root_link(struct dentry
 static ssize_t get_mm_cmdline(struct mm_struct *mm, char __user *buf,
 			      size_t count, loff_t *ppos)
 {
-	unsigned long arg_start, arg_end, env_start, env_end;
+	unsigned long arg_start, arg_end;
 	unsigned long pos, len;
 	char *page;
 
@@ -219,36 +219,18 @@ static ssize_t get_mm_cmdline(struct mm_
 	spin_lock(&mm->arg_lock);
 	arg_start = mm->arg_start;
 	arg_end = mm->arg_end;
-	env_start = mm->env_start;
-	env_end = mm->env_end;
 	spin_unlock(&mm->arg_lock);
 
 	if (arg_start >= arg_end)
 		return 0;
 
-	/*
-	 * We have traditionally allowed the user to re-write
-	 * the argument strings and overflow the end result
-	 * into the environment section. But only do that if
-	 * the environment area is contiguous to the arguments.
-	 */
-	if (env_start != arg_end || env_start >= env_end)
-		env_start = env_end = arg_end;
-
-	/* .. and limit it to a maximum of one page of slop */
-	if (env_end >= arg_end + PAGE_SIZE)
-		env_end = arg_end + PAGE_SIZE - 1;
-
 	/* We're not going to care if "*ppos" has high bits set */
-	pos = arg_start + *ppos;
-
 	/* .. but we do check the result is in the proper range */
-	if (pos < arg_start || pos >= env_end)
+	pos = arg_start + *ppos;
+	if (pos < arg_start || pos >= arg_end)
 		return 0;
-
-	/* .. and we never go past env_end */
-	if (env_end - pos < count)
-		count = env_end - pos;
+	if (count > arg_end - pos)
+		count = arg_end - pos;
 
 	page = (char *)__get_free_page(GFP_KERNEL);
 	if (!page)
@@ -258,48 +240,11 @@ static ssize_t get_mm_cmdline(struct mm_
 	while (count) {
 		int got;
 		size_t size = min_t(size_t, PAGE_SIZE, count);
-		long offset;
-
-		/*
-		 * Are we already starting past the official end?
-		 * We always include the last byte that is *supposed*
-		 * to be NUL
-		 */
-		offset = (pos >= arg_end) ? pos - arg_end + 1 : 0;
 
-		got = access_remote_vm(mm, pos - offset, page, size + offset, FOLL_ANON);
-		if (got <= offset)
+		got = access_remote_vm(mm, pos, page, size, FOLL_ANON);
+		if (got <= 0)
 			break;
-		got -= offset;
-
-		/* Don't walk past a NUL character once you hit arg_end */
-		if (pos + got >= arg_end) {
-			int n = 0;
-
-			/*
-			 * If we started before 'arg_end' but ended up
-			 * at or after it, we start the NUL character
-			 * check at arg_end-1 (where we expect the normal
-			 * EOF to be).
-			 *
-			 * NOTE! This is smaller than 'got', because
-			 * pos + got >= arg_end
-			 */
-			if (pos < arg_end)
-				n = arg_end - pos - 1;
-
-			/* Cut off at first NUL after 'n' */
-			got = n + strnlen(page+n, offset+got-n);
-			if (got < offset)
-				break;
-			got -= offset;
-
-			/* Include the NUL if it existed */
-			if (got < size)
-				got++;
-		}
-
-		got -= copy_to_user(buf, page+offset, got);
+		got -= copy_to_user(buf, page, got);
 		if (unlikely(!got)) {
 			if (!len)
 				len = -EFAULT;

[PATCH 4.19 27/32] /proc/<pid>/cmdline: add back the setproctitle() special case

[Greg Kroah-Hartman]

From: Linus Torvalds <torvalds@linux-foundation.org>

commit d26d0cd97c88eb1a5704b42e41ab443406807810 upstream.

This makes the setproctitle() special case very explicit indeed, and
handles it with a separate helper function entirely.  In the process, it
re-instates the original semantics of simply stopping at the first NUL
character when the original last NUL character is no longer there.

[ The original semantics can still be seen in mm/util.c: get_cmdline()
  that is limited to a fixed-size buffer ]

This makes the logic about when we use the string lengths etc much more
obvious, and makes it easier to see what we do and what the two very
different cases are.

Note that even when we allow walking past the end of the argument array
(because the setproctitle() might have overwritten and overflowed the
original argv[] strings), we only allow it when it overflows into the
environment region if it is immediately adjacent.

[ Fixed for missing 'count' checks noted by Alexey Izbyshev ]

Link: https://lore.kernel.org/lkml/alpine.LNX.2.21.1904052326230.3249@kich.toxcorp.com/
Fixes: 5ab827189965 ("fs/proc: simplify and clarify get_mm_cmdline() function")
Cc: Jakub Jankowski <shasta@toxcorp.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alexey Izbyshev <izbyshev@ispras.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/proc/base.c |   81 ++++++++++++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 77 insertions(+), 4 deletions(-)

--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -205,12 +205,53 @@ static int proc_root_link(struct dentry
 	return result;
 }
 
+/*
+ * If the user used setproctitle(), we just get the string from
+ * user space at arg_start, and limit it to a maximum of one page.
+ */
+static ssize_t get_mm_proctitle(struct mm_struct *mm, char __user *buf,
+				size_t count, unsigned long pos,
+				unsigned long arg_start)
+{
+	char *page;
+	int ret, got;
+
+	if (pos >= PAGE_SIZE)
+		return 0;
+
+	page = (char *)__get_free_page(GFP_KERNEL);
+	if (!page)
+		return -ENOMEM;
+
+	ret = 0;
+	got = access_remote_vm(mm, arg_start, page, PAGE_SIZE, FOLL_ANON);
+	if (got > 0) {
+		int len = strnlen(page, got);
+
+		/* Include the NUL character if it was found */
+		if (len < got)
+			len++;
+
+		if (len > pos) {
+			len -= pos;
+			if (len > count)
+				len = count;
+			len -= copy_to_user(buf, page+pos, len);
+			if (!len)
+				len = -EFAULT;
+			ret = len;
+		}
+	}
+	free_page((unsigned long)page);
+	return ret;
+}
+
 static ssize_t get_mm_cmdline(struct mm_struct *mm, char __user *buf,
 			      size_t count, loff_t *ppos)
 {
-	unsigned long arg_start, arg_end;
+	unsigned long arg_start, arg_end, env_start, env_end;
 	unsigned long pos, len;
-	char *page;
+	char *page, c;
 
 	/* Check if process spawned far enough to have cmdline. */
 	if (!mm->env_end)
@@ -219,14 +260,46 @@ static ssize_t get_mm_cmdline(struct mm_
 	spin_lock(&mm->arg_lock);
 	arg_start = mm->arg_start;
 	arg_end = mm->arg_end;
+	env_start = mm->env_start;
+	env_end = mm->env_end;
 	spin_unlock(&mm->arg_lock);
 
 	if (arg_start >= arg_end)
 		return 0;
 
+	/*
+	 * We allow setproctitle() to overwrite the argument
+	 * strings, and overflow past the original end. But
+	 * only when it overflows into the environment area.
+	 */
+	if (env_start != arg_end || env_end < env_start)
+		env_start = env_end = arg_end;
+	len = env_end - arg_start;
+
 	/* We're not going to care if "*ppos" has high bits set */
-	/* .. but we do check the result is in the proper range */
-	pos = arg_start + *ppos;
+	pos = *ppos;
+	if (pos >= len)
+		return 0;
+	if (count > len - pos)
+		count = len - pos;
+	if (!count)
+		return 0;
+
+	/*
+	 * Magical special case: if the argv[] end byte is not
+	 * zero, the user has overwritten it with setproctitle(3).
+	 *
+	 * Possible future enhancement: do this only once when
+	 * pos is 0, and set a flag in the 'struct file'.
+	 */
+	if (access_remote_vm(mm, arg_end-1, &c, 1, FOLL_ANON) == 1 && c)
+		return get_mm_proctitle(mm, buf, count, pos, arg_start);
+
+	/*
+	 * For the non-setproctitle() case we limit things strictly
+	 * to the [arg_start, arg_end[ range.
+	 */
+	pos += arg_start;
 	if (pos < arg_start || pos >= arg_end)
 		return 0;
 	if (count > arg_end - pos)

[PATCH 4.19 28/32] drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl

[Greg Kroah-Hartman]

From: Miroslav Lichvar <mlichvar@redhat.com>

commit 5515e9a6273b8c02034466bcbd717ac9f53dab99 upstream.

The PPS assert/clear offset corrections are set by the PPS_SETPARAMS
ioctl in the pps_ktime structs, which also contain flags.  The flags are
not initialized by applications (using the timepps.h header) and they
are not used by the kernel for anything except returning them back in
the PPS_GETPARAMS ioctl.

Set the flags to zero to make it clear they are unused and avoid leaking
uninitialized data of the PPS_SETPARAMS caller to other applications
that have a read access to the PPS device.

Link: http://lkml.kernel.org/r/20190702092251.24303-1-mlichvar@redhat.com
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Cc: Greg KH <greg@kroah.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pps/pps.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/pps/pps.c
+++ b/drivers/pps/pps.c
@@ -166,6 +166,14 @@ static long pps_cdev_ioctl(struct file *
 			pps->params.mode |= PPS_CANWAIT;
 		pps->params.api_version = PPS_API_VERS;
 
+		/*
+		 * Clear unused fields of pps_kparams to avoid leaking
+		 * uninitialized data of the PPS_SETPARAMS caller via
+		 * PPS_GETPARAMS
+		 */
+		pps->params.assert_off_tu.flags = 0;
+		pps->params.clear_off_tu.flags = 0;
+
 		spin_unlock_irq(&pps->lock);
 
 		break;

[PATCH 4.19 29/32] Fix allyesconfig output.

[Greg Kroah-Hartman]

From: Yoshinori Sato <ysato@users.sourceforge.jp>

commit 1b496469d0c020e09124e03e66a81421c21272a7 upstream.

Conflict JCore-SoC and SolutionEngine 7619.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/sh/boards/Kconfig |   14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

--- a/arch/sh/boards/Kconfig
+++ b/arch/sh/boards/Kconfig
@@ -8,27 +8,19 @@ config SH_ALPHA_BOARD
 	bool
 
 config SH_DEVICE_TREE
-	bool "Board Described by Device Tree"
+	bool
 	select OF
 	select OF_EARLY_FLATTREE
 	select TIMER_OF
 	select COMMON_CLK
 	select GENERIC_CALIBRATE_DELAY
-	help
-	  Select Board Described by Device Tree to build a kernel that
-	  does not hard-code any board-specific knowledge but instead uses
-	  a device tree blob provided by the boot-loader. You must enable
-	  drivers for any hardware you want to use separately. At this
-	  time, only boards based on the open-hardware J-Core processors
-	  have sufficient driver coverage to use this option; do not
-	  select it if you are using original SuperH hardware.
 
 config SH_JCORE_SOC
 	bool "J-Core SoC"
-	depends on SH_DEVICE_TREE && (CPU_SH2 || CPU_J2)
+	select SH_DEVICE_TREE
 	select CLKSRC_JCORE_PIT
 	select JCORE_AIC
-	default y if CPU_J2
+	depends on CPU_J2
 	help
 	  Select this option to include drivers core components of the
 	  J-Core SoC, including interrupt controllers and timers.

[PATCH 4.19 30/32] ceph: hold i_ceph_lock when removing caps for freeing inode

[Greg Kroah-Hartman]

From: Yan, Zheng <zyan@redhat.com>

commit d6e47819721ae2d9d090058ad5570a66f3c42e39 upstream.

ceph_d_revalidate(, LOOKUP_RCU) may call __ceph_caps_issued_mask()
on a freeing inode.

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ceph/caps.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -1237,20 +1237,23 @@ static int send_cap_msg(struct cap_msg_a
 }
 
 /*
- * Queue cap releases when an inode is dropped from our cache.  Since
- * inode is about to be destroyed, there is no need for i_ceph_lock.
+ * Queue cap releases when an inode is dropped from our cache.
  */
 void ceph_queue_caps_release(struct inode *inode)
 {
 	struct ceph_inode_info *ci = ceph_inode(inode);
 	struct rb_node *p;
 
+	/* lock i_ceph_lock, because ceph_d_revalidate(..., LOOKUP_RCU)
+	 * may call __ceph_caps_issued_mask() on a freeing inode. */
+	spin_lock(&ci->i_ceph_lock);
 	p = rb_first(&ci->i_caps);
 	while (p) {
 		struct ceph_cap *cap = rb_entry(p, struct ceph_cap, ci_node);
 		p = rb_next(p);
 		__ceph_remove_cap(cap, true);
 	}
+	spin_unlock(&ci->i_ceph_lock);
 }
 
 /*

[PATCH 4.19 31/32] block, scsi: Change the preempt-only flag into a counter

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

commit cd84a62e0078dce09f4ed349bec84f86c9d54b30 upstream.

The RQF_PREEMPT flag is used for three purposes:
- In the SCSI core, for making sure that power management requests
  are executed even if a device is in the "quiesced" state.
- For domain validation by SCSI drivers that use the parallel port.
- In the IDE driver, for IDE preempt requests.
Rename "preempt-only" into "pm-only" because the primary purpose of
this mode is power management. Since the power management core may
but does not have to resume a runtime suspended device before
performing system-wide suspend and since a later patch will set
"pm-only" mode as long as a block device is runtime suspended, make
it possible to set "pm-only" mode from more than one context. Since
with this change scsi_device_quiesce() is no longer idempotent, make
that function return early if it is called for a quiesced queue.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/blk-core.c        |   35 ++++++++++++++++++-----------------
 block/blk-mq-debugfs.c  |   10 +++++++++-
 drivers/scsi/scsi_lib.c |   11 +++++++----
 include/linux/blkdev.h  |   14 +++++++++-----
 4 files changed, 43 insertions(+), 27 deletions(-)

--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -421,24 +421,25 @@ void blk_sync_queue(struct request_queue
 EXPORT_SYMBOL(blk_sync_queue);
 
 /**
- * blk_set_preempt_only - set QUEUE_FLAG_PREEMPT_ONLY
+ * blk_set_pm_only - increment pm_only counter
  * @q: request queue pointer
- *
- * Returns the previous value of the PREEMPT_ONLY flag - 0 if the flag was not
- * set and 1 if the flag was already set.
  */
-int blk_set_preempt_only(struct request_queue *q)
+void blk_set_pm_only(struct request_queue *q)
 {
-	return blk_queue_flag_test_and_set(QUEUE_FLAG_PREEMPT_ONLY, q);
+	atomic_inc(&q->pm_only);
 }
-EXPORT_SYMBOL_GPL(blk_set_preempt_only);
+EXPORT_SYMBOL_GPL(blk_set_pm_only);
 
-void blk_clear_preempt_only(struct request_queue *q)
+void blk_clear_pm_only(struct request_queue *q)
 {
-	blk_queue_flag_clear(QUEUE_FLAG_PREEMPT_ONLY, q);
-	wake_up_all(&q->mq_freeze_wq);
+	int pm_only;
+
+	pm_only = atomic_dec_return(&q->pm_only);
+	WARN_ON_ONCE(pm_only < 0);
+	if (pm_only == 0)
+		wake_up_all(&q->mq_freeze_wq);
 }
-EXPORT_SYMBOL_GPL(blk_clear_preempt_only);
+EXPORT_SYMBOL_GPL(blk_clear_pm_only);
 
 /**
  * __blk_run_queue_uncond - run a queue whether or not it has been stopped
@@ -916,7 +917,7 @@ EXPORT_SYMBOL(blk_alloc_queue);
  */
 int blk_queue_enter(struct request_queue *q, blk_mq_req_flags_t flags)
 {
-	const bool preempt = flags & BLK_MQ_REQ_PREEMPT;
+	const bool pm = flags & BLK_MQ_REQ_PREEMPT;
 
 	while (true) {
 		bool success = false;
@@ -924,11 +925,11 @@ int blk_queue_enter(struct request_queue
 		rcu_read_lock();
 		if (percpu_ref_tryget_live(&q->q_usage_counter)) {
 			/*
-			 * The code that sets the PREEMPT_ONLY flag is
-			 * responsible for ensuring that that flag is globally
-			 * visible before the queue is unfrozen.
+			 * The code that increments the pm_only counter is
+			 * responsible for ensuring that that counter is
+			 * globally visible before the queue is unfrozen.
 			 */
-			if (preempt || !blk_queue_preempt_only(q)) {
+			if (pm || !blk_queue_pm_only(q)) {
 				success = true;
 			} else {
 				percpu_ref_put(&q->q_usage_counter);
@@ -953,7 +954,7 @@ int blk_queue_enter(struct request_queue
 
 		wait_event(q->mq_freeze_wq,
 			   (atomic_read(&q->mq_freeze_depth) == 0 &&
-			    (preempt || !blk_queue_preempt_only(q))) ||
+			    (pm || !blk_queue_pm_only(q))) ||
 			   blk_queue_dying(q));
 		if (blk_queue_dying(q))
 			return -ENODEV;
--- a/block/blk-mq-debugfs.c
+++ b/block/blk-mq-debugfs.c
@@ -102,6 +102,14 @@ static int blk_flags_show(struct seq_fil
 	return 0;
 }
 
+static int queue_pm_only_show(void *data, struct seq_file *m)
+{
+	struct request_queue *q = data;
+
+	seq_printf(m, "%d\n", atomic_read(&q->pm_only));
+	return 0;
+}
+
 #define QUEUE_FLAG_NAME(name) [QUEUE_FLAG_##name] = #name
 static const char *const blk_queue_flag_name[] = {
 	QUEUE_FLAG_NAME(QUEUED),
@@ -132,7 +140,6 @@ static const char *const blk_queue_flag_
 	QUEUE_FLAG_NAME(REGISTERED),
 	QUEUE_FLAG_NAME(SCSI_PASSTHROUGH),
 	QUEUE_FLAG_NAME(QUIESCED),
-	QUEUE_FLAG_NAME(PREEMPT_ONLY),
 };
 #undef QUEUE_FLAG_NAME
 
@@ -209,6 +216,7 @@ static ssize_t queue_write_hint_store(vo
 static const struct blk_mq_debugfs_attr blk_mq_debugfs_queue_attrs[] = {
 	{ "poll_stat", 0400, queue_poll_stat_show },
 	{ "requeue_list", 0400, .seq_ops = &queue_requeue_list_seq_ops },
+	{ "pm_only", 0600, queue_pm_only_show, NULL },
 	{ "state", 0600, queue_state_show, queue_state_write },
 	{ "write_hints", 0600, queue_write_hint_show, queue_write_hint_store },
 	{ "zone_wlock", 0400, queue_zone_wlock_show, NULL },
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -3059,11 +3059,14 @@ scsi_device_quiesce(struct scsi_device *
 	 */
 	WARN_ON_ONCE(sdev->quiesced_by && sdev->quiesced_by != current);
 
-	blk_set_preempt_only(q);
+	if (sdev->quiesced_by == current)
+		return 0;
+
+	blk_set_pm_only(q);
 
 	blk_mq_freeze_queue(q);
 	/*
-	 * Ensure that the effect of blk_set_preempt_only() will be visible
+	 * Ensure that the effect of blk_set_pm_only() will be visible
 	 * for percpu_ref_tryget() callers that occur after the queue
 	 * unfreeze even if the queue was already frozen before this function
 	 * was called. See also https://lwn.net/Articles/573497/.
@@ -3076,7 +3079,7 @@ scsi_device_quiesce(struct scsi_device *
 	if (err == 0)
 		sdev->quiesced_by = current;
 	else
-		blk_clear_preempt_only(q);
+		blk_clear_pm_only(q);
 	mutex_unlock(&sdev->state_mutex);
 
 	return err;
@@ -3100,7 +3103,7 @@ void scsi_device_resume(struct scsi_devi
 	 */
 	mutex_lock(&sdev->state_mutex);
 	sdev->quiesced_by = NULL;
-	blk_clear_preempt_only(sdev->request_queue);
+	blk_clear_pm_only(sdev->request_queue);
 	if (sdev->sdev_state == SDEV_QUIESCE)
 		scsi_device_set_state(sdev, SDEV_RUNNING);
 	mutex_unlock(&sdev->state_mutex);
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -504,6 +504,12 @@ struct request_queue {
 	 * various queue flags, see QUEUE_* below
 	 */
 	unsigned long		queue_flags;
+	/*
+	 * Number of contexts that have called blk_set_pm_only(). If this
+	 * counter is above zero then only RQF_PM and RQF_PREEMPT requests are
+	 * processed.
+	 */
+	atomic_t		pm_only;
 
 	/*
 	 * ida allocated id for this queue.  Used to index queues from
@@ -698,7 +704,6 @@ struct request_queue {
 #define QUEUE_FLAG_REGISTERED  26	/* queue has been registered to a disk */
 #define QUEUE_FLAG_SCSI_PASSTHROUGH 27	/* queue supports SCSI commands */
 #define QUEUE_FLAG_QUIESCED    28	/* queue has been quiesced */
-#define QUEUE_FLAG_PREEMPT_ONLY	29	/* only process REQ_PREEMPT requests */
 
 #define QUEUE_FLAG_DEFAULT	((1 << QUEUE_FLAG_IO_STAT) |		\
 				 (1 << QUEUE_FLAG_SAME_COMP)	|	\
@@ -736,12 +741,11 @@ bool blk_queue_flag_test_and_clear(unsig
 	((rq)->cmd_flags & (REQ_FAILFAST_DEV|REQ_FAILFAST_TRANSPORT| \
 			     REQ_FAILFAST_DRIVER))
 #define blk_queue_quiesced(q)	test_bit(QUEUE_FLAG_QUIESCED, &(q)->queue_flags)
-#define blk_queue_preempt_only(q)				\
-	test_bit(QUEUE_FLAG_PREEMPT_ONLY, &(q)->queue_flags)
+#define blk_queue_pm_only(q)	atomic_read(&(q)->pm_only)
 #define blk_queue_fua(q)	test_bit(QUEUE_FLAG_FUA, &(q)->queue_flags)
 
-extern int blk_set_preempt_only(struct request_queue *q);
-extern void blk_clear_preempt_only(struct request_queue *q);
+extern void blk_set_pm_only(struct request_queue *q);
+extern void blk_clear_pm_only(struct request_queue *q);
 
 static inline int queue_in_flight(struct request_queue *q)
 {

[PATCH 4.19 32/32] scsi: core: Avoid that a kernel warning appears during system resume

[Greg Kroah-Hartman]

From: Bart Van Assche <bvanassche@acm.org>

commit 17605afaae825b0291f80c62a7f6565879edaa8a upstream.

Since scsi_device_quiesce() skips SCSI devices that have another state than
RUNNING, OFFLINE or TRANSPORT_OFFLINE, scsi_device_resume() should not
complain about SCSI devices that have been skipped. Hence this patch.  This
patch avoids that the following warning appears during resume:

WARNING: CPU: 3 PID: 1039 at blk_clear_pm_only+0x2a/0x30
CPU: 3 PID: 1039 Comm: kworker/u8:49 Not tainted 5.0.0+ #1
Hardware name: LENOVO 4180F42/4180F42, BIOS 83ET75WW (1.45 ) 05/10/2013
Workqueue: events_unbound async_run_entry_fn
RIP: 0010:blk_clear_pm_only+0x2a/0x30
Call Trace:
 ? scsi_device_resume+0x28/0x50
 ? scsi_dev_type_resume+0x2b/0x80
 ? async_run_entry_fn+0x2c/0xd0
 ? process_one_work+0x1f0/0x3f0
 ? worker_thread+0x28/0x3c0
 ? process_one_work+0x3f0/0x3f0
 ? kthread+0x10c/0x130
 ? __kthread_create_on_node+0x150/0x150
 ? ret_from_fork+0x1f/0x30

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Martin Steigerwald <martin@lichtvoll.de>
Cc: <stable@vger.kernel.org>
Reported-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Tested-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Fixes: 3a0a529971ec ("block, scsi: Make SCSI quiesce and resume work reliably") # v4.15
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/scsi_lib.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -3102,8 +3102,10 @@ void scsi_device_resume(struct scsi_devi
 	 * device deleted during suspend)
 	 */
 	mutex_lock(&sdev->state_mutex);
-	sdev->quiesced_by = NULL;
-	blk_clear_pm_only(sdev->request_queue);
+	if (sdev->quiesced_by) {
+		sdev->quiesced_by = NULL;
+		blk_clear_pm_only(sdev->request_queue);
+	}
 	if (sdev->sdev_state == SDEV_QUIESCE)
 		scsi_device_set_state(sdev, SDEV_RUNNING);
 	mutex_unlock(&sdev->state_mutex);

Re: [PATCH 4.19 00/32] 4.19.64-stable review

[shuah]

On 8/2/19 3:39 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.64 release.
> There are 32 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun 04 Aug 2019 09:19:34 AM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.64-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 4.19 00/32] 4.19.64-stable review

[Naresh Kamboju]

On Fri, 2 Aug 2019 at 15:26, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.64 release.
> There are 32 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun 04 Aug 2019 09:19:34 AM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.64-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.19.64-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: 63a8dab46af2b65ecdb5a83662d94a3a26be973e
git describe: v4.19.62-148-g63a8dab46af2
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.19-oe/build/v4.19.62-148-g63a8dab46af2


No regressions (compared to build v4.19.62)


No fixes (compared to build v4.19.62)

Ran 25243 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libgpiod
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* ltp-fs-tests
* network-basic-tests
* ltp-open-posix-tests
* kvm-unit-tests
* ssuite
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.19 00/32] 4.19.64-stable review

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 4900 bytes --]

On Fri 2019-08-02 11:39:34, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.64 release.
> There are 32 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun 04 Aug 2019 09:19:34 AM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.64-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.

The git tree does not seem to correspond to the patches posted. git has:

commit 63a8dab46af2b65ecdb5a83662d94a3a26be973e
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date:   Fri Aug 2 13:30:55 2019 +0200

    Linux 4.19.64-rc1

commit 1b35ed42aeacc21a9d21646165333566dd8e181a
Author: Xin Long <lucien.xin@gmail.com>
Date:   Mon Jun 17 21:34:13 2019 +0800

    ip_tunnel: allow not to count pkts on tstats by setting skb's dev
    to NULL
    
But 1b35ed42aeacc ip_tunnel patch is not mentioned here nor is
included in the series on the list AFAICT. (I don't find anything
wrong with 1b35ed42aeacc).

Best regards,
								Pavel


> Pseudo-Shortlog of commits:
> 
> Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>     Linux 4.19.64-rc1
> 
> Bart Van Assche <bvanassche@acm.org>
>     scsi: core: Avoid that a kernel warning appears during system resume
> 
> Bart Van Assche <bvanassche@acm.org>
>     block, scsi: Change the preempt-only flag into a counter
> 
> Yan, Zheng <zyan@redhat.com>
>     ceph: hold i_ceph_lock when removing caps for freeing inode
> 
> Yoshinori Sato <ysato@users.sourceforge.jp>
>     Fix allyesconfig output.
> 
> Miroslav Lichvar <mlichvar@redhat.com>
>     drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl
> 
> Linus Torvalds <torvalds@linux-foundation.org>
>     /proc/<pid>/cmdline: add back the setproctitle() special case
> 
> Linus Torvalds <torvalds@linux-foundation.org>
>     /proc/<pid>/cmdline: remove all the special cases
> 
> Jann Horn <jannh@google.com>
>     sched/fair: Use RCU accessors consistently for ->numa_group
> 
> Jann Horn <jannh@google.com>
>     sched/fair: Don't free p->numa_faults with concurrent readers
> 
> Jason Wang <jasowang@redhat.com>
>     vhost: scsi: add weight support
> 
> Jason Wang <jasowang@redhat.com>
>     vhost: vsock: add weight support
> 
> Jason Wang <jasowang@redhat.com>
>     vhost_net: fix possible infinite loop
> 
> Jason Wang <jasowang@redhat.com>
>     vhost: introduce vhost_exceeds_weight()
> 
> Vladis Dronov <vdronov@redhat.com>
>     Bluetooth: hci_uart: check for missing tty operations
> 
> Joerg Roedel <jroedel@suse.de>
>     iommu/iova: Fix compilation error with !CONFIG_IOMMU_IOVA
> 
> Dmitry Safonov <dima@arista.com>
>     iommu/vt-d: Don't queue_iova() if there is no flush queue
> 
> Luke Nowakowski-Krijger <lnowakow@eng.ucsd.edu>
>     media: radio-raremono: change devm_k*alloc to k*alloc
> 
> Benjamin Coddington <bcodding@redhat.com>
>     NFS: Cleanup if nfs_match_client is interrupted
> 
> Andrey Konovalov <andreyknvl@google.com>
>     media: pvrusb2: use a different format for warnings
> 
> Oliver Neukum <oneukum@suse.com>
>     media: cpia2_usb: first wake up, then free in disconnect
> 
> Fabio Estevam <festevam@gmail.com>
>     ath10k: Change the warning message string
> 
> Sean Young <sean@mess.org>
>     media: au0828: fix null dereference in error path
> 
> Phong Tran <tranmanphong@gmail.com>
>     ISDN: hfcsusb: checking idx of ep configuration
> 
> Todd Kjos <tkjos@android.com>
>     binder: fix possible UAF when freeing buffer
> 
> Will Deacon <will.deacon@arm.com>
>     arm64: compat: Provide definition for COMPAT_SIGMINSTKSZ
> 
> Minas Harutyunyan <minas.harutyunyan@synopsys.com>
>     usb: dwc2: Fix disable all EP's on disconnect
> 
> Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
>     usb: dwc2: Disable all EP's on disconnect
> 
> Trond Myklebust <trond.myklebust@hammerspace.com>
>     NFSv4: Fix lookup revalidate of regular files
> 
> Trond Myklebust <trond.myklebust@hammerspace.com>
>     NFS: Refactor nfs_lookup_revalidate()
> 
> Trond Myklebust <trond.myklebust@hammerspace.com>
>     NFS: Fix dentry revalidation on NFSv4 lookup
> 
> Sunil Muthuswamy <sunilmut@microsoft.com>
>     vsock: correct removal of socket from the list
> 
> Sunil Muthuswamy <sunilmut@microsoft.com>
>     hv_sock: Add support for delayed close

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH 4.19 00/32] 4.19.64-stable review

[Greg Kroah-Hartman]

On Sat, Aug 03, 2019 at 11:58:25AM +0200, Pavel Machek wrote:
> On Fri 2019-08-02 11:39:34, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.19.64 release.
> > There are 32 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sun 04 Aug 2019 09:19:34 AM UTC.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.64-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> > and the diffstat can be found below.
> 
> The git tree does not seem to correspond to the patches posted. git has:
> 
> commit 63a8dab46af2b65ecdb5a83662d94a3a26be973e
> Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Date:   Fri Aug 2 13:30:55 2019 +0200
> 
>     Linux 4.19.64-rc1
> 
> commit 1b35ed42aeacc21a9d21646165333566dd8e181a
> Author: Xin Long <lucien.xin@gmail.com>
> Date:   Mon Jun 17 21:34:13 2019 +0800
> 
>     ip_tunnel: allow not to count pkts on tstats by setting skb's dev
>     to NULL
>     
> But 1b35ed42aeacc ip_tunnel patch is not mentioned here nor is
> included in the series on the list AFAICT. (I don't find anything
> wrong with 1b35ed42aeacc).

It was added after I did this release, see the stable mailing list for
the details, it went into the 4.14.y and 4.19.y tree at the same time.

thanks,

greg k-h

Re: [PATCH 4.19 00/32] 4.19.64-stable review

[Guenter Roeck]

On 8/2/19 2:39 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.64 release.
> There are 32 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun 04 Aug 2019 09:19:34 AM UTC.
> Anything received after that time might be too late.
> 

Build results:
	total: 156 pass: 156 fail: 0
Qemu test results:
	total: 364 pass: 364 fail: 0

Guenter