[PATCH 00/14] mfd: convert subsystem to i2c_new_dummy_device()

[PATCH 00/14] mfd: convert subsystem to i2c_new_dummy_device()

[Wolfram Sang]

This series is part of a tree-wide movement to replace the I2C API call
'i2c_new_dummy' which returns NULL with its new counterpart returning an
ERRPTR.

The series was generated with coccinelle (audited afterwards, of course) and
build tested by me and by buildbot. No tests on HW have been performed.

The branch is based on v5.3-rc1. A branch (with some more stuff included) can
be found here:

git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git renesas/i2c/new_dummy

Some drivers still need to be manually converted. Patches for those will be
sent out individually.


Wolfram Sang (14):
  mfd: 88pm800: convert to i2c_new_dummy_device
  mfd: 88pm860x-core: convert to i2c_new_dummy_device
  mfd: ab3100-core: convert to i2c_new_dummy_device
  mfd: bcm590xx: convert to i2c_new_dummy_device
  mfd: da9150-core: convert to i2c_new_dummy_device
  mfd: max14577: convert to i2c_new_dummy_device
  mfd: max77693: convert to i2c_new_dummy_device
  mfd: max77843: convert to i2c_new_dummy_device
  mfd: max8907: convert to i2c_new_dummy_device
  mfd: max8925-i2c: convert to i2c_new_dummy_device
  mfd: max8997: convert to i2c_new_dummy_device
  mfd: max8998: convert to i2c_new_dummy_device
  mfd: palmas: convert to i2c_new_dummy_device
  mfd: twl-core: convert to i2c_new_dummy_device

 drivers/mfd/88pm800.c       | 12 ++++++------
 drivers/mfd/88pm860x-core.c |  6 +++---
 drivers/mfd/ab3100-core.c   |  6 +++---
 drivers/mfd/bcm590xx.c      |  6 +++---
 drivers/mfd/da9150-core.c   |  6 +++---
 drivers/mfd/max14577.c      |  6 +++---
 drivers/mfd/max77693.c      | 12 ++++++------
 drivers/mfd/max77843.c      |  6 +++---
 drivers/mfd/max8907.c       |  6 +++---
 drivers/mfd/max8925-i2c.c   | 12 ++++++------
 drivers/mfd/max8997.c       | 18 +++++++++---------
 drivers/mfd/max8998.c       |  6 +++---
 drivers/mfd/palmas.c        |  6 +++---
 drivers/mfd/twl-core.c      |  6 +++---
 14 files changed, 57 insertions(+), 57 deletions(-)

-- 
2.20.1

[PATCH 01/14] mfd: 88pm800: convert to i2c_new_dummy_device

[Wolfram Sang]

Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.

 drivers/mfd/88pm800.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
index f2d9fb4c4e8e..4e8d0d6b9b5c 100644
--- a/drivers/mfd/88pm800.c
+++ b/drivers/mfd/88pm800.c
@@ -425,10 +425,10 @@ static int pm800_pages_init(struct pm80x_chip *chip)
 		return -ENODEV;
 
 	/* PM800 block power page */
-	subchip->power_page = i2c_new_dummy(client->adapter,
+	subchip->power_page = i2c_new_dummy_device(client->adapter,
 					    subchip->power_page_addr);
-	if (subchip->power_page == NULL) {
-		ret = -ENODEV;
+	if (IS_ERR(subchip->power_page)) {
+		ret = PTR_ERR(subchip->power_page);
 		goto out;
 	}
 
@@ -444,10 +444,10 @@ static int pm800_pages_init(struct pm80x_chip *chip)
 	i2c_set_clientdata(subchip->power_page, chip);
 
 	/* PM800 block GPADC */
-	subchip->gpadc_page = i2c_new_dummy(client->adapter,
+	subchip->gpadc_page = i2c_new_dummy_device(client->adapter,
 					    subchip->gpadc_page_addr);
-	if (subchip->gpadc_page == NULL) {
-		ret = -ENODEV;
+	if (IS_ERR(subchip->gpadc_page)) {
+		ret = PTR_ERR(subchip->gpadc_page);
 		goto out;
 	}
 
-- 
2.20.1

Re: [PATCH 01/14] mfd: 88pm800: convert to i2c_new_dummy_device

[Lee Jones]

On Mon, 22 Jul 2019, Wolfram Sang wrote:

> Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
> ERRPTR which we use in error handling.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> 
> Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.
> 
>  drivers/mfd/88pm800.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH 02/14] mfd: 88pm860x-core: convert to i2c_new_dummy_device

[Wolfram Sang]

Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.

 drivers/mfd/88pm860x-core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c
index 9e0bd135730f..c9bae71f643a 100644
--- a/drivers/mfd/88pm860x-core.c
+++ b/drivers/mfd/88pm860x-core.c
@@ -1178,12 +1178,12 @@ static int pm860x_probe(struct i2c_client *client)
 	 */
 	if (pdata->companion_addr && (pdata->companion_addr != client->addr)) {
 		chip->companion_addr = pdata->companion_addr;
-		chip->companion = i2c_new_dummy(chip->client->adapter,
+		chip->companion = i2c_new_dummy_device(chip->client->adapter,
 						chip->companion_addr);
-		if (!chip->companion) {
+		if (IS_ERR(chip->companion)) {
 			dev_err(&client->dev,
 				"Failed to allocate I2C companion device\n");
-			return -ENODEV;
+			return PTR_ERR(chip->companion);
 		}
 		chip->regmap_companion = regmap_init_i2c(chip->companion,
 							&pm860x_regmap_config);
-- 
2.20.1

Re: [PATCH 02/14] mfd: 88pm860x-core: convert to i2c_new_dummy_device

[Lee Jones]

On Mon, 22 Jul 2019, Wolfram Sang wrote:

> Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
> ERRPTR which we use in error handling.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> 
> Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.
> 
>  drivers/mfd/88pm860x-core.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH 03/14] mfd: ab3100-core: convert to i2c_new_dummy_device

[Wolfram Sang]

Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.

 drivers/mfd/ab3100-core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index e350ab64238e..7e007df857b8 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -896,10 +896,10 @@ static int ab3100_probe(struct i2c_client *client,
 		 &ab3100->chip_name[0]);
 
 	/* Attach a second dummy i2c_client to the test register address */
-	ab3100->testreg_client = i2c_new_dummy(client->adapter,
+	ab3100->testreg_client = i2c_new_dummy_device(client->adapter,
 					       client->addr + 1);
-	if (!ab3100->testreg_client) {
-		err = -ENOMEM;
+	if (IS_ERR(ab3100->testreg_client)) {
+		err = PTR_ERR(ab3100->testreg_client);
 		goto exit_no_testreg_client;
 	}
 
-- 
2.20.1

Re: [PATCH 03/14] mfd: ab3100-core: convert to i2c_new_dummy_device

[Linus Walleij]

On Mon, Jul 22, 2019 at 7:26 PM Wolfram Sang
<wsa+renesas@sang-engineering.com> wrote:

> Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
> ERRPTR which we use in error handling.
>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

Re: [PATCH 03/14] mfd: ab3100-core: convert to i2c_new_dummy_device

[Lee Jones]

On Mon, 22 Jul 2019, Wolfram Sang wrote:

> Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
> ERRPTR which we use in error handling.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> 
> Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.
> 
>  drivers/mfd/ab3100-core.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH 04/14] mfd: bcm590xx: convert to i2c_new_dummy_device

[Wolfram Sang]

Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.

 drivers/mfd/bcm590xx.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/bcm590xx.c b/drivers/mfd/bcm590xx.c
index 1aeb5e498d91..bfac5dc091ca 100644
--- a/drivers/mfd/bcm590xx.c
+++ b/drivers/mfd/bcm590xx.c
@@ -61,11 +61,11 @@ static int bcm590xx_i2c_probe(struct i2c_client *i2c_pri,
 	}
 
 	/* Secondary I2C slave address is the base address with A(2) asserted */
-	bcm590xx->i2c_sec = i2c_new_dummy(i2c_pri->adapter,
+	bcm590xx->i2c_sec = i2c_new_dummy_device(i2c_pri->adapter,
 					  i2c_pri->addr | BIT(2));
-	if (!bcm590xx->i2c_sec) {
+	if (IS_ERR(bcm590xx->i2c_sec)) {
 		dev_err(&i2c_pri->dev, "failed to add secondary I2C device\n");
-		return -ENODEV;
+		return PTR_ERR(bcm590xx->i2c_sec);
 	}
 	i2c_set_clientdata(bcm590xx->i2c_sec, bcm590xx);
 
-- 
2.20.1

Re: [PATCH 04/14] mfd: bcm590xx: convert to i2c_new_dummy_device

[Lee Jones]

On Mon, 22 Jul 2019, Wolfram Sang wrote:

> Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
> ERRPTR which we use in error handling.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> 
> Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.
> 
>  drivers/mfd/bcm590xx.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH 05/14] mfd: da9150-core: convert to i2c_new_dummy_device

[Wolfram Sang]

Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.

 drivers/mfd/da9150-core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/da9150-core.c b/drivers/mfd/da9150-core.c
index 13033068721a..7f0aa1e8db96 100644
--- a/drivers/mfd/da9150-core.c
+++ b/drivers/mfd/da9150-core.c
@@ -420,10 +420,10 @@ static int da9150_probe(struct i2c_client *client,
 	qif_addr = da9150_reg_read(da9150, DA9150_CORE2WIRE_CTRL_A);
 	qif_addr = (qif_addr & DA9150_CORE_BASE_ADDR_MASK) >> 1;
 	qif_addr |= DA9150_QIF_I2C_ADDR_LSB;
-	da9150->core_qif = i2c_new_dummy(client->adapter, qif_addr);
-	if (!da9150->core_qif) {
+	da9150->core_qif = i2c_new_dummy_device(client->adapter, qif_addr);
+	if (IS_ERR(da9150->core_qif)) {
 		dev_err(da9150->dev, "Failed to attach QIF client\n");
-		return -ENODEV;
+		return PTR_ERR(da9150->core_qif);
 	}
 
 	i2c_set_clientdata(da9150->core_qif, da9150);
-- 
2.20.1

Re: [PATCH 05/14] mfd: da9150-core: convert to i2c_new_dummy_device

[Lee Jones]

On Mon, 22 Jul 2019, Wolfram Sang wrote:

> Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
> ERRPTR which we use in error handling.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> 
> Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.
> 
>  drivers/mfd/da9150-core.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH 06/14] mfd: max14577: convert to i2c_new_dummy_device

[Wolfram Sang]

Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.

 drivers/mfd/max14577.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/max14577.c b/drivers/mfd/max14577.c
index ebb13d5de530..fd8864cafd25 100644
--- a/drivers/mfd/max14577.c
+++ b/drivers/mfd/max14577.c
@@ -297,11 +297,11 @@ static int max77836_init(struct max14577 *max14577)
 	int ret;
 	u8 intsrc_mask;
 
-	max14577->i2c_pmic = i2c_new_dummy(max14577->i2c->adapter,
+	max14577->i2c_pmic = i2c_new_dummy_device(max14577->i2c->adapter,
 			I2C_ADDR_PMIC);
-	if (!max14577->i2c_pmic) {
+	if (IS_ERR(max14577->i2c_pmic)) {
 		dev_err(max14577->dev, "Failed to register PMIC I2C device\n");
-		return -ENODEV;
+		return PTR_ERR(max14577->i2c_pmic);
 	}
 	i2c_set_clientdata(max14577->i2c_pmic, max14577);
 
-- 
2.20.1

Re: [PATCH 06/14] mfd: max14577: convert to i2c_new_dummy_device

[Krzysztof Kozlowski]

On Mon, Jul 22, 2019 at 07:26:13PM +0200, Wolfram Sang wrote:
> Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
> ERRPTR which we use in error handling.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> 
> Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.

I do not have the HW for testing anymore but looks good:
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof

Re: [PATCH 06/14] mfd: max14577: convert to i2c_new_dummy_device

[Lee Jones]

On Mon, 22 Jul 2019, Wolfram Sang wrote:

> Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
> ERRPTR which we use in error handling.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> 
> Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.
> 
>  drivers/mfd/max14577.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH 07/14] mfd: max77693: convert to i2c_new_dummy_device

[Wolfram Sang]

Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.

 drivers/mfd/max77693.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c
index 901d99d65924..596ed85cab3b 100644
--- a/drivers/mfd/max77693.c
+++ b/drivers/mfd/max77693.c
@@ -183,17 +183,17 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
 	} else
 		dev_info(max77693->dev, "device ID: 0x%x\n", reg_data);
 
-	max77693->i2c_muic = i2c_new_dummy(i2c->adapter, I2C_ADDR_MUIC);
-	if (!max77693->i2c_muic) {
+	max77693->i2c_muic = i2c_new_dummy_device(i2c->adapter, I2C_ADDR_MUIC);
+	if (IS_ERR(max77693->i2c_muic)) {
 		dev_err(max77693->dev, "Failed to allocate I2C device for MUIC\n");
-		return -ENODEV;
+		return PTR_ERR(max77693->i2c_muic);
 	}
 	i2c_set_clientdata(max77693->i2c_muic, max77693);
 
-	max77693->i2c_haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC);
-	if (!max77693->i2c_haptic) {
+	max77693->i2c_haptic = i2c_new_dummy_device(i2c->adapter, I2C_ADDR_HAPTIC);
+	if (IS_ERR(max77693->i2c_haptic)) {
 		dev_err(max77693->dev, "Failed to allocate I2C device for Haptic\n");
-		ret = -ENODEV;
+		ret = PTR_ERR(max77693->i2c_haptic);
 		goto err_i2c_haptic;
 	}
 	i2c_set_clientdata(max77693->i2c_haptic, max77693);
-- 
2.20.1

Re: [PATCH 07/14] mfd: max77693: convert to i2c_new_dummy_device

[Krzysztof Kozlowski]

On Mon, Jul 22, 2019 at 07:26:14PM +0200, Wolfram Sang wrote:
> Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
> ERRPTR which we use in error handling.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> 
> Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.
> 
>  drivers/mfd/max77693.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>

Best regards,
Krzysztof

Re: [PATCH 07/14] mfd: max77693: convert to i2c_new_dummy_device

[Lee Jones]

On Mon, 22 Jul 2019, Wolfram Sang wrote:

> Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
> ERRPTR which we use in error handling.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> 
> Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.
> 
>  drivers/mfd/max77693.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH 08/14] mfd: max77843: convert to i2c_new_dummy_device

[Wolfram Sang]

Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.

 drivers/mfd/max77843.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/max77843.c b/drivers/mfd/max77843.c
index 25cbb2242b26..209ee24d9ce1 100644
--- a/drivers/mfd/max77843.c
+++ b/drivers/mfd/max77843.c
@@ -70,11 +70,11 @@ static int max77843_chg_init(struct max77693_dev *max77843)
 {
 	int ret;
 
-	max77843->i2c_chg = i2c_new_dummy(max77843->i2c->adapter, I2C_ADDR_CHG);
-	if (!max77843->i2c_chg) {
+	max77843->i2c_chg = i2c_new_dummy_device(max77843->i2c->adapter, I2C_ADDR_CHG);
+	if (IS_ERR(max77843->i2c_chg)) {
 		dev_err(&max77843->i2c->dev,
 				"Cannot allocate I2C device for Charger\n");
-		return -ENODEV;
+		return PTR_ERR(max77843->i2c_chg);
 	}
 	i2c_set_clientdata(max77843->i2c_chg, max77843);
 
-- 
2.20.1

Re: [PATCH 08/14] mfd: max77843: convert to i2c_new_dummy_device

[Lee Jones]

On Mon, 22 Jul 2019, Wolfram Sang wrote:

> Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
> ERRPTR which we use in error handling.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> 
> Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.
> 
>  drivers/mfd/max77843.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH 09/14] mfd: max8907: convert to i2c_new_dummy_device

[Wolfram Sang]

Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.

 drivers/mfd/max8907.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/max8907.c b/drivers/mfd/max8907.c
index cc01f706cb32..d44baafd9d14 100644
--- a/drivers/mfd/max8907.c
+++ b/drivers/mfd/max8907.c
@@ -214,9 +214,9 @@ static int max8907_i2c_probe(struct i2c_client *i2c,
 		goto err_regmap_gen;
 	}
 
-	max8907->i2c_rtc = i2c_new_dummy(i2c->adapter, MAX8907_RTC_I2C_ADDR);
-	if (!max8907->i2c_rtc) {
-		ret = -ENOMEM;
+	max8907->i2c_rtc = i2c_new_dummy_device(i2c->adapter, MAX8907_RTC_I2C_ADDR);
+	if (IS_ERR(max8907->i2c_rtc)) {
+		ret = PTR_ERR(max8907->i2c_rtc);
 		goto err_dummy_rtc;
 	}
 	i2c_set_clientdata(max8907->i2c_rtc, max8907);
-- 
2.20.1

Re: [PATCH 09/14] mfd: max8907: convert to i2c_new_dummy_device

[Lee Jones]

On Mon, 22 Jul 2019, Wolfram Sang wrote:

> Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
> ERRPTR which we use in error handling.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> 
> Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.
> 
>  drivers/mfd/max8907.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH 10/14] mfd: max8925-i2c: convert to i2c_new_dummy_device

[Wolfram Sang]

Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.

 drivers/mfd/max8925-i2c.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/max8925-i2c.c b/drivers/mfd/max8925-i2c.c
index 20bb19b71109..114e905bef25 100644
--- a/drivers/mfd/max8925-i2c.c
+++ b/drivers/mfd/max8925-i2c.c
@@ -176,18 +176,18 @@ static int max8925_probe(struct i2c_client *client,
 	dev_set_drvdata(chip->dev, chip);
 	mutex_init(&chip->io_lock);
 
-	chip->rtc = i2c_new_dummy(chip->i2c->adapter, RTC_I2C_ADDR);
-	if (!chip->rtc) {
+	chip->rtc = i2c_new_dummy_device(chip->i2c->adapter, RTC_I2C_ADDR);
+	if (IS_ERR(chip->rtc)) {
 		dev_err(chip->dev, "Failed to allocate I2C device for RTC\n");
-		return -ENODEV;
+		return PTR_ERR(chip->rtc);
 	}
 	i2c_set_clientdata(chip->rtc, chip);
 
-	chip->adc = i2c_new_dummy(chip->i2c->adapter, ADC_I2C_ADDR);
-	if (!chip->adc) {
+	chip->adc = i2c_new_dummy_device(chip->i2c->adapter, ADC_I2C_ADDR);
+	if (IS_ERR(chip->adc)) {
 		dev_err(chip->dev, "Failed to allocate I2C device for ADC\n");
 		i2c_unregister_device(chip->rtc);
-		return -ENODEV;
+		return PTR_ERR(chip->adc);
 	}
 	i2c_set_clientdata(chip->adc, chip);
 
-- 
2.20.1

Re: [PATCH 10/14] mfd: max8925-i2c: convert to i2c_new_dummy_device

[Lee Jones]

On Mon, 22 Jul 2019, Wolfram Sang wrote:

> Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
> ERRPTR which we use in error handling.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> 
> Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.
> 
>  drivers/mfd/max8925-i2c.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH 11/14] mfd: max8997: convert to i2c_new_dummy_device

[Wolfram Sang]

Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.

 drivers/mfd/max8997.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
index 8c06c09e36d1..68d8f2b95287 100644
--- a/drivers/mfd/max8997.c
+++ b/drivers/mfd/max8997.c
@@ -185,25 +185,25 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
 
 	mutex_init(&max8997->iolock);
 
-	max8997->rtc = i2c_new_dummy(i2c->adapter, I2C_ADDR_RTC);
-	if (!max8997->rtc) {
+	max8997->rtc = i2c_new_dummy_device(i2c->adapter, I2C_ADDR_RTC);
+	if (IS_ERR(max8997->rtc)) {
 		dev_err(max8997->dev, "Failed to allocate I2C device for RTC\n");
-		return -ENODEV;
+		return PTR_ERR(max8997->rtc);
 	}
 	i2c_set_clientdata(max8997->rtc, max8997);
 
-	max8997->haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC);
-	if (!max8997->haptic) {
+	max8997->haptic = i2c_new_dummy_device(i2c->adapter, I2C_ADDR_HAPTIC);
+	if (IS_ERR(max8997->haptic)) {
 		dev_err(max8997->dev, "Failed to allocate I2C device for Haptic\n");
-		ret = -ENODEV;
+		ret = PTR_ERR(max8997->haptic);
 		goto err_i2c_haptic;
 	}
 	i2c_set_clientdata(max8997->haptic, max8997);
 
-	max8997->muic = i2c_new_dummy(i2c->adapter, I2C_ADDR_MUIC);
-	if (!max8997->muic) {
+	max8997->muic = i2c_new_dummy_device(i2c->adapter, I2C_ADDR_MUIC);
+	if (IS_ERR(max8997->muic)) {
 		dev_err(max8997->dev, "Failed to allocate I2C device for MUIC\n");
-		ret = -ENODEV;
+		ret = PTR_ERR(max8997->muic);
 		goto err_i2c_muic;
 	}
 	i2c_set_clientdata(max8997->muic, max8997);
-- 
2.20.1

Re: [PATCH 11/14] mfd: max8997: convert to i2c_new_dummy_device

[Lee Jones]

On Mon, 22 Jul 2019, Wolfram Sang wrote:

> Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
> ERRPTR which we use in error handling.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> 
> Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.
> 
>  drivers/mfd/max8997.c | 18 +++++++++---------
>  1 file changed, 9 insertions(+), 9 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH 12/14] mfd: max8998: convert to i2c_new_dummy_device

[Wolfram Sang]

Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.

 drivers/mfd/max8998.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c
index 56409df120f8..785f8e9841b7 100644
--- a/drivers/mfd/max8998.c
+++ b/drivers/mfd/max8998.c
@@ -195,10 +195,10 @@ static int max8998_i2c_probe(struct i2c_client *i2c,
 	}
 	mutex_init(&max8998->iolock);
 
-	max8998->rtc = i2c_new_dummy(i2c->adapter, RTC_I2C_ADDR);
-	if (!max8998->rtc) {
+	max8998->rtc = i2c_new_dummy_device(i2c->adapter, RTC_I2C_ADDR);
+	if (IS_ERR(max8998->rtc)) {
 		dev_err(&i2c->dev, "Failed to allocate I2C device for RTC\n");
-		return -ENODEV;
+		return PTR_ERR(max8998->rtc);
 	}
 	i2c_set_clientdata(max8998->rtc, max8998);
 
-- 
2.20.1

Re: [PATCH 12/14] mfd: max8998: convert to i2c_new_dummy_device

[Lee Jones]

On Mon, 22 Jul 2019, Wolfram Sang wrote:

> Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
> ERRPTR which we use in error handling.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> 
> Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.
> 
>  drivers/mfd/max8998.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH 13/14] mfd: palmas: convert to i2c_new_dummy_device

[Wolfram Sang]

Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.

 drivers/mfd/palmas.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c
index 6818ff34837c..f5b3fa973b13 100644
--- a/drivers/mfd/palmas.c
+++ b/drivers/mfd/palmas.c
@@ -549,12 +549,12 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
 			palmas->i2c_clients[i] = i2c;
 		else {
 			palmas->i2c_clients[i] =
-					i2c_new_dummy(i2c->adapter,
+					i2c_new_dummy_device(i2c->adapter,
 							i2c->addr + i);
-			if (!palmas->i2c_clients[i]) {
+			if (IS_ERR(palmas->i2c_clients[i])) {
 				dev_err(palmas->dev,
 					"can't attach client %d\n", i);
-				ret = -ENOMEM;
+				ret = PTR_ERR(palmas->i2c_clients[i]);
 				goto err_i2c;
 			}
 			palmas->i2c_clients[i]->dev.of_node = of_node_get(node);
-- 
2.20.1

Re: [PATCH 13/14] mfd: palmas: convert to i2c_new_dummy_device

[Lee Jones]

On Mon, 22 Jul 2019, Wolfram Sang wrote:

> Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
> ERRPTR which we use in error handling.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> 
> Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.
> 
>  drivers/mfd/palmas.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH 14/14] mfd: twl-core: convert to i2c_new_dummy_device

[Wolfram Sang]

Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.

 drivers/mfd/twl-core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 448d9397ff04..20cf8cfe4f3b 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -1141,12 +1141,12 @@ twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		if (i == 0) {
 			twl->client = client;
 		} else {
-			twl->client = i2c_new_dummy(client->adapter,
+			twl->client = i2c_new_dummy_device(client->adapter,
 						    client->addr + i);
-			if (!twl->client) {
+			if (IS_ERR(twl->client)) {
 				dev_err(&client->dev,
 					"can't attach client %d\n", i);
-				status = -ENOMEM;
+				status = PTR_ERR(twl->client);
 				goto fail;
 			}
 		}
-- 
2.20.1

Re: [PATCH 14/14] mfd: twl-core: convert to i2c_new_dummy_device

[Lee Jones]

On Mon, 22 Jul 2019, Wolfram Sang wrote:

> Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
> ERRPTR which we use in error handling.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
> 
> Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.
> 
>  drivers/mfd/twl-core.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog