LKML Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] regulator: add missing 'static inline' to a helper's stub
@ 2019-09-02 15:13 Bartosz Golaszewski
  2019-09-03 11:57 ` Applied "regulator: add missing 'static inline' to a helper's stub" to the regulator tree Mark Brown
  0 siblings, 1 reply; 2+ messages in thread
From: Bartosz Golaszewski @ 2019-09-02 15:13 UTC (permalink / raw)
  To: Liam Girdwood, Mark Brown; +Cc: linux-kernel, Bartosz Golaszewski

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

The build fails when CONFIG_REGULATOR is not selected because the stub
for regulator_bulk_set_supply_names() is missing the 'static inline'
attribute.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 include/linux/regulator/consumer.h | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 6d2181a76987..337a46391527 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -586,9 +586,10 @@ static inline int regulator_list_voltage(struct regulator *regulator, unsigned s
 	return -EINVAL;
 }
 
-void regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
-				     const char *const *supply_names,
-				     unsigned int num_supplies)
+static inline void
+regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
+				const char *const *supply_names,
+				unsigned int num_supplies)
 {
 }
 
-- 
2.21.0


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-02 15:13 [PATCH] regulator: add missing 'static inline' to a helper's stub Bartosz Golaszewski
2019-09-03 11:57 ` Applied "regulator: add missing 'static inline' to a helper's stub" to the regulator tree Mark Brown

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git