[PATCH v4 0/6] Initialise thermal framework and cpufreq earlier during boot

[PATCH v4 0/6] Initialise thermal framework and cpufreq earlier during boot

[Amit Kucheria]

Changes since v3:
- Init schedutil governor earlier too
- Simplified changes to thermal_init() error path
- Collects Acks

Changes since v2:
- Missed one patch when posting v2. Respinning.

Changes since v1:
- Completely get rid of netlink support in the thermal framework.
- This changes the early init patch to a single line - change to
  core_initcall. Changed authorship of patch since it is nothing like the
  original. Lina, let me know if you feel otherwise.
- I've tested to make sure that the qcom-cpufreq-hw driver continues to
  work correctly as a module so this won't impact Android's GKI plans.
- Collected Acks

Device boot needs to be as fast as possible while keeping under the thermal
envelope. Now that thermal framework is built-in to the kernel, we can
initialize it earlier to enable thermal mitigation during boot.

We also need the cpufreq HW drivers to be initialised earlier to act as the
cooling devices. This series only converts over the qcom-hw driver to
initialize earlier but can be extended to other platforms as well.

Amit Kucheria (6):
  thermal: Remove netlink support
  thermal: Initialize thermal subsystem earlier
  cpufreq: Initialise the governors in core_initcall
  cpufreq: Initialize cpufreq-dt driver earlier
  clk: qcom: Initialise clock drivers earlier
  cpufreq: qcom-hw: Move driver initialisation earlier

 .../driver-api/thermal/sysfs-api.rst          |  26 +----
 drivers/clk/qcom/clk-rpmh.c                   |   2 +-
 drivers/clk/qcom/gcc-qcs404.c                 |   2 +-
 drivers/clk/qcom/gcc-sdm845.c                 |   2 +-
 drivers/cpufreq/cpufreq-dt-platdev.c          |   2 +-
 drivers/cpufreq/cpufreq_conservative.c        |   2 +-
 drivers/cpufreq/cpufreq_ondemand.c            |   2 +-
 drivers/cpufreq/cpufreq_performance.c         |   2 +-
 drivers/cpufreq/cpufreq_powersave.c           |   2 +-
 drivers/cpufreq/cpufreq_userspace.c           |   2 +-
 drivers/cpufreq/qcom-cpufreq-hw.c             |   2 +-
 drivers/thermal/thermal_core.c                | 103 +-----------------
 include/linux/thermal.h                       |  11 --
 kernel/sched/cpufreq_schedutil.c              |   2 +-
 14 files changed, 19 insertions(+), 143 deletions(-)

-- 
2.17.1

[PATCH v4 1/6] thermal: Remove netlink support

[Amit Kucheria]

There are no users of netlink messages for thermal inside the kernel.
Remove the code and adjust the documentation.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 .../driver-api/thermal/sysfs-api.rst          |  26 ++---
 drivers/thermal/thermal_core.c                | 101 +-----------------
 include/linux/thermal.h                       |  11 --
 3 files changed, 7 insertions(+), 131 deletions(-)

diff --git a/Documentation/driver-api/thermal/sysfs-api.rst b/Documentation/driver-api/thermal/sysfs-api.rst
index fab2c9b36d084..b40b1f8391481 100644
--- a/Documentation/driver-api/thermal/sysfs-api.rst
+++ b/Documentation/driver-api/thermal/sysfs-api.rst
@@ -725,24 +725,10 @@ method, the sys I/F structure will be built like this::
     |---temp1_input:		37000
     |---temp1_crit:		100000
 
-4. Event Notification
+4. Export Symbol APIs
 =====================
 
-The framework includes a simple notification mechanism, in the form of a
-netlink event. Netlink socket initialization is done during the _init_
-of the framework. Drivers which intend to use the notification mechanism
-just need to call thermal_generate_netlink_event() with two arguments viz
-(originator, event). The originator is a pointer to struct thermal_zone_device
-from where the event has been originated. An integer which represents the
-thermal zone device will be used in the message to identify the zone. The
-event will be one of:{THERMAL_AUX0, THERMAL_AUX1, THERMAL_CRITICAL,
-THERMAL_DEV_FAULT}. Notification can be sent when the current temperature
-crosses any of the configured thresholds.
-
-5. Export Symbol APIs
-=====================
-
-5.1. get_tz_trend
+4.1. get_tz_trend
 -----------------
 
 This function returns the trend of a thermal zone, i.e the rate of change
@@ -751,14 +737,14 @@ are supposed to implement the callback. If they don't, the thermal
 framework calculated the trend by comparing the previous and the current
 temperature values.
 
-5.2. get_thermal_instance
+4.2. get_thermal_instance
 -------------------------
 
 This function returns the thermal_instance corresponding to a given
 {thermal_zone, cooling_device, trip_point} combination. Returns NULL
 if such an instance does not exist.
 
-5.3. thermal_notify_framework
+4.3. thermal_notify_framework
 -----------------------------
 
 This function handles the trip events from sensor drivers. It starts
@@ -768,14 +754,14 @@ and does actual throttling for other trip points i.e ACTIVE and PASSIVE.
 The throttling policy is based on the configured platform data; if no
 platform data is provided, this uses the step_wise throttling policy.
 
-5.4. thermal_cdev_update
+4.4. thermal_cdev_update
 ------------------------
 
 This function serves as an arbitrator to set the state of a cooling
 device. It sets the cooling device to the deepest cooling state if
 possible.
 
-6. thermal_emergency_poweroff
+5. thermal_emergency_poweroff
 =============================
 
 On an event of critical trip temperature crossing. Thermal framework
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index d4481cc8958fe..cced0638b686f 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -19,8 +19,6 @@
 #include <linux/reboot.h>
 #include <linux/string.h>
 #include <linux/of.h>
-#include <net/netlink.h>
-#include <net/genetlink.h>
 #include <linux/suspend.h>
 
 #define CREATE_TRACE_POINTS
@@ -1464,97 +1462,6 @@ struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name)
 }
 EXPORT_SYMBOL_GPL(thermal_zone_get_zone_by_name);
 
-#ifdef CONFIG_NET
-static const struct genl_multicast_group thermal_event_mcgrps[] = {
-	{ .name = THERMAL_GENL_MCAST_GROUP_NAME, },
-};
-
-static struct genl_family thermal_event_genl_family __ro_after_init = {
-	.module = THIS_MODULE,
-	.name = THERMAL_GENL_FAMILY_NAME,
-	.version = THERMAL_GENL_VERSION,
-	.maxattr = THERMAL_GENL_ATTR_MAX,
-	.mcgrps = thermal_event_mcgrps,
-	.n_mcgrps = ARRAY_SIZE(thermal_event_mcgrps),
-};
-
-int thermal_generate_netlink_event(struct thermal_zone_device *tz,
-				   enum events event)
-{
-	struct sk_buff *skb;
-	struct nlattr *attr;
-	struct thermal_genl_event *thermal_event;
-	void *msg_header;
-	int size;
-	int result;
-	static unsigned int thermal_event_seqnum;
-
-	if (!tz)
-		return -EINVAL;
-
-	/* allocate memory */
-	size = nla_total_size(sizeof(struct thermal_genl_event)) +
-	       nla_total_size(0);
-
-	skb = genlmsg_new(size, GFP_ATOMIC);
-	if (!skb)
-		return -ENOMEM;
-
-	/* add the genetlink message header */
-	msg_header = genlmsg_put(skb, 0, thermal_event_seqnum++,
-				 &thermal_event_genl_family, 0,
-				 THERMAL_GENL_CMD_EVENT);
-	if (!msg_header) {
-		nlmsg_free(skb);
-		return -ENOMEM;
-	}
-
-	/* fill the data */
-	attr = nla_reserve(skb, THERMAL_GENL_ATTR_EVENT,
-			   sizeof(struct thermal_genl_event));
-
-	if (!attr) {
-		nlmsg_free(skb);
-		return -EINVAL;
-	}
-
-	thermal_event = nla_data(attr);
-	if (!thermal_event) {
-		nlmsg_free(skb);
-		return -EINVAL;
-	}
-
-	memset(thermal_event, 0, sizeof(struct thermal_genl_event));
-
-	thermal_event->orig = tz->id;
-	thermal_event->event = event;
-
-	/* send multicast genetlink message */
-	genlmsg_end(skb, msg_header);
-
-	result = genlmsg_multicast(&thermal_event_genl_family, skb, 0,
-				   0, GFP_ATOMIC);
-	if (result)
-		dev_err(&tz->device, "Failed to send netlink event:%d", result);
-
-	return result;
-}
-EXPORT_SYMBOL_GPL(thermal_generate_netlink_event);
-
-static int __init genetlink_init(void)
-{
-	return genl_register_family(&thermal_event_genl_family);
-}
-
-static void genetlink_exit(void)
-{
-	genl_unregister_family(&thermal_event_genl_family);
-}
-#else /* !CONFIG_NET */
-static inline int genetlink_init(void) { return 0; }
-static inline void genetlink_exit(void) {}
-#endif /* !CONFIG_NET */
-
 static int thermal_pm_notify(struct notifier_block *nb,
 			     unsigned long mode, void *_unused)
 {
@@ -1607,13 +1514,9 @@ static int __init thermal_init(void)
 	if (result)
 		goto unregister_governors;
 
-	result = genetlink_init();
-	if (result)
-		goto unregister_class;
-
 	result = of_parse_thermal_zones();
 	if (result)
-		goto exit_netlink;
+		goto unregister_class;
 
 	result = register_pm_notifier(&thermal_pm_nb);
 	if (result)
@@ -1622,8 +1525,6 @@ static int __init thermal_init(void)
 
 	return 0;
 
-exit_netlink:
-	genetlink_exit();
 unregister_class:
 	class_unregister(&thermal_class);
 unregister_governors:
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index e45659c759209..d9111aebb97d6 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -544,15 +544,4 @@ static inline void thermal_notify_framework(struct thermal_zone_device *tz,
 { }
 #endif /* CONFIG_THERMAL */
 
-#if defined(CONFIG_NET) && IS_ENABLED(CONFIG_THERMAL)
-extern int thermal_generate_netlink_event(struct thermal_zone_device *tz,
-						enum events event);
-#else
-static inline int thermal_generate_netlink_event(struct thermal_zone_device *tz,
-						enum events event)
-{
-	return 0;
-}
-#endif
-
 #endif /* __THERMAL_H__ */
-- 
2.17.1

[PATCH v4 2/6] thermal: Initialize thermal subsystem earlier

[Amit Kucheria]

Now that the thermal framework is built-in, in order to facilitate
thermal mitigation as early as possible in the boot cycle, move the
thermal framework initialization to core_initcall.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/thermal/thermal_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index cced0638b686f..69fcd54f8a83e 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -1537,4 +1537,4 @@ static int __init thermal_init(void)
 	mutex_destroy(&poweroff_lock);
 	return result;
 }
-fs_initcall(thermal_init);
+core_initcall(thermal_init);
-- 
2.17.1

[PATCH v4 3/6] cpufreq: Initialise the governors in core_initcall

[Amit Kucheria]

Initialise the cpufreq governors earlier to allow for earlier
performance control during the boot process.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/cpufreq_conservative.c | 2 +-
 drivers/cpufreq/cpufreq_ondemand.c     | 2 +-
 drivers/cpufreq/cpufreq_performance.c  | 2 +-
 drivers/cpufreq/cpufreq_powersave.c    | 2 +-
 drivers/cpufreq/cpufreq_userspace.c    | 2 +-
 kernel/sched/cpufreq_schedutil.c       | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index b66e81c06a575..737ff3b9c2c09 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -346,7 +346,7 @@ struct cpufreq_governor *cpufreq_default_governor(void)
 	return CPU_FREQ_GOV_CONSERVATIVE;
 }
 
-fs_initcall(cpufreq_gov_dbs_init);
+core_initcall(cpufreq_gov_dbs_init);
 #else
 module_init(cpufreq_gov_dbs_init);
 #endif
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index dced033875bf8..82a4d37ddecb3 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -483,7 +483,7 @@ struct cpufreq_governor *cpufreq_default_governor(void)
 	return CPU_FREQ_GOV_ONDEMAND;
 }
 
-fs_initcall(cpufreq_gov_dbs_init);
+core_initcall(cpufreq_gov_dbs_init);
 #else
 module_init(cpufreq_gov_dbs_init);
 #endif
diff --git a/drivers/cpufreq/cpufreq_performance.c b/drivers/cpufreq/cpufreq_performance.c
index aaa04dfcacd9d..def9afe0f5b86 100644
--- a/drivers/cpufreq/cpufreq_performance.c
+++ b/drivers/cpufreq/cpufreq_performance.c
@@ -50,5 +50,5 @@ MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
 MODULE_DESCRIPTION("CPUfreq policy governor 'performance'");
 MODULE_LICENSE("GPL");
 
-fs_initcall(cpufreq_gov_performance_init);
+core_initcall(cpufreq_gov_performance_init);
 module_exit(cpufreq_gov_performance_exit);
diff --git a/drivers/cpufreq/cpufreq_powersave.c b/drivers/cpufreq/cpufreq_powersave.c
index c143dc237d878..1ae66019eb835 100644
--- a/drivers/cpufreq/cpufreq_powersave.c
+++ b/drivers/cpufreq/cpufreq_powersave.c
@@ -43,7 +43,7 @@ struct cpufreq_governor *cpufreq_default_governor(void)
 	return &cpufreq_gov_powersave;
 }
 
-fs_initcall(cpufreq_gov_powersave_init);
+core_initcall(cpufreq_gov_powersave_init);
 #else
 module_init(cpufreq_gov_powersave_init);
 #endif
diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c
index cbd81c58cb8f0..b43e7cd502c58 100644
--- a/drivers/cpufreq/cpufreq_userspace.c
+++ b/drivers/cpufreq/cpufreq_userspace.c
@@ -147,7 +147,7 @@ struct cpufreq_governor *cpufreq_default_governor(void)
 	return &cpufreq_gov_userspace;
 }
 
-fs_initcall(cpufreq_gov_userspace_init);
+core_initcall(cpufreq_gov_userspace_init);
 #else
 module_init(cpufreq_gov_userspace_init);
 #endif
diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
index 86800b4d5453f..322ca8860f548 100644
--- a/kernel/sched/cpufreq_schedutil.c
+++ b/kernel/sched/cpufreq_schedutil.c
@@ -915,7 +915,7 @@ static int __init sugov_register(void)
 {
 	return cpufreq_register_governor(&schedutil_gov);
 }
-fs_initcall(sugov_register);
+core_initcall(sugov_register);
 
 #ifdef CONFIG_ENERGY_MODEL
 extern bool sched_energy_update;
-- 
2.17.1

Re: [PATCH v4 3/6] cpufreq: Initialise the governors in core_initcall

[Rafael J. Wysocki]

On Friday, October 18, 2019 10:52:00 AM CEST Amit Kucheria wrote:
> Initialise the cpufreq governors earlier to allow for earlier
> performance control during the boot process.
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

No more issues found, so

Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

> ---
>  drivers/cpufreq/cpufreq_conservative.c | 2 +-
>  drivers/cpufreq/cpufreq_ondemand.c     | 2 +-
>  drivers/cpufreq/cpufreq_performance.c  | 2 +-
>  drivers/cpufreq/cpufreq_powersave.c    | 2 +-
>  drivers/cpufreq/cpufreq_userspace.c    | 2 +-
>  kernel/sched/cpufreq_schedutil.c       | 2 +-
>  6 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
> index b66e81c06a575..737ff3b9c2c09 100644
> --- a/drivers/cpufreq/cpufreq_conservative.c
> +++ b/drivers/cpufreq/cpufreq_conservative.c
> @@ -346,7 +346,7 @@ struct cpufreq_governor *cpufreq_default_governor(void)
>  	return CPU_FREQ_GOV_CONSERVATIVE;
>  }
>  
> -fs_initcall(cpufreq_gov_dbs_init);
> +core_initcall(cpufreq_gov_dbs_init);
>  #else
>  module_init(cpufreq_gov_dbs_init);
>  #endif
> diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
> index dced033875bf8..82a4d37ddecb3 100644
> --- a/drivers/cpufreq/cpufreq_ondemand.c
> +++ b/drivers/cpufreq/cpufreq_ondemand.c
> @@ -483,7 +483,7 @@ struct cpufreq_governor *cpufreq_default_governor(void)
>  	return CPU_FREQ_GOV_ONDEMAND;
>  }
>  
> -fs_initcall(cpufreq_gov_dbs_init);
> +core_initcall(cpufreq_gov_dbs_init);
>  #else
>  module_init(cpufreq_gov_dbs_init);
>  #endif
> diff --git a/drivers/cpufreq/cpufreq_performance.c b/drivers/cpufreq/cpufreq_performance.c
> index aaa04dfcacd9d..def9afe0f5b86 100644
> --- a/drivers/cpufreq/cpufreq_performance.c
> +++ b/drivers/cpufreq/cpufreq_performance.c
> @@ -50,5 +50,5 @@ MODULE_AUTHOR("Dominik Brodowski <linux@brodo.de>");
>  MODULE_DESCRIPTION("CPUfreq policy governor 'performance'");
>  MODULE_LICENSE("GPL");
>  
> -fs_initcall(cpufreq_gov_performance_init);
> +core_initcall(cpufreq_gov_performance_init);
>  module_exit(cpufreq_gov_performance_exit);
> diff --git a/drivers/cpufreq/cpufreq_powersave.c b/drivers/cpufreq/cpufreq_powersave.c
> index c143dc237d878..1ae66019eb835 100644
> --- a/drivers/cpufreq/cpufreq_powersave.c
> +++ b/drivers/cpufreq/cpufreq_powersave.c
> @@ -43,7 +43,7 @@ struct cpufreq_governor *cpufreq_default_governor(void)
>  	return &cpufreq_gov_powersave;
>  }
>  
> -fs_initcall(cpufreq_gov_powersave_init);
> +core_initcall(cpufreq_gov_powersave_init);
>  #else
>  module_init(cpufreq_gov_powersave_init);
>  #endif
> diff --git a/drivers/cpufreq/cpufreq_userspace.c b/drivers/cpufreq/cpufreq_userspace.c
> index cbd81c58cb8f0..b43e7cd502c58 100644
> --- a/drivers/cpufreq/cpufreq_userspace.c
> +++ b/drivers/cpufreq/cpufreq_userspace.c
> @@ -147,7 +147,7 @@ struct cpufreq_governor *cpufreq_default_governor(void)
>  	return &cpufreq_gov_userspace;
>  }
>  
> -fs_initcall(cpufreq_gov_userspace_init);
> +core_initcall(cpufreq_gov_userspace_init);
>  #else
>  module_init(cpufreq_gov_userspace_init);
>  #endif
> diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
> index 86800b4d5453f..322ca8860f548 100644
> --- a/kernel/sched/cpufreq_schedutil.c
> +++ b/kernel/sched/cpufreq_schedutil.c
> @@ -915,7 +915,7 @@ static int __init sugov_register(void)
>  {
>  	return cpufreq_register_governor(&schedutil_gov);
>  }
> -fs_initcall(sugov_register);
> +core_initcall(sugov_register);
>  
>  #ifdef CONFIG_ENERGY_MODEL
>  extern bool sched_energy_update;
> 

[PATCH v4 4/6] cpufreq: Initialize cpufreq-dt driver earlier

[Amit Kucheria]

This allows HW drivers that depend on cpufreq-dt to initialise earlier.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/cpufreq-dt-platdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index bca8d1f47fd2c..3282defe14d41 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -180,4 +180,4 @@ static int __init cpufreq_dt_platdev_init(void)
 			       -1, data,
 			       sizeof(struct cpufreq_dt_platform_data)));
 }
-device_initcall(cpufreq_dt_platdev_init);
+core_initcall(cpufreq_dt_platdev_init);
-- 
2.17.1

Re: [PATCH v4 4/6] cpufreq: Initialize cpufreq-dt driver earlier

[Ingo Molnar]

* Amit Kucheria <amit.kucheria@linaro.org> wrote:

> This allows HW drivers that depend on cpufreq-dt to initialise earlier.

My obsessive-compulsive in-brain spellchecker noticed that the title says 
'initialize' (US spelling), while the comment uses 'initialise' (UK 
spelling). Just in case this is not some post-Brexit expression of 
cross-Atlantic friendliness you might want to fix it. :)

Thanks,

	Ingo

Re: [PATCH v4 4/6] cpufreq: Initialize cpufreq-dt driver earlier

[Amit Kucheria]

On Mon, Oct 21, 2019 at 1:38 PM Ingo Molnar <mingo@kernel.org> wrote:
>
>
> * Amit Kucheria <amit.kucheria@linaro.org> wrote:
>
> > This allows HW drivers that depend on cpufreq-dt to initialise earlier.
>
> My obsessive-compulsive in-brain spellchecker noticed that the title says
> 'initialize' (US spelling), while the comment uses 'initialise' (UK
> spelling). Just in case this is not some post-Brexit expression of
> cross-Atlantic friendliness you might want to fix it. :)

Naah, its just my confused brain that grew up learning British
English, then spent enough time in US to pick up some of that too. I
think it is a form of selective spelling blindness :-)

Will fix.

[PATCH v4 5/6] clk: qcom: Initialise clock drivers earlier

[Amit Kucheria]

Initialise the clock drivers on sdm845 and qcs404 in core_initcall so we
can have earlier access to cpufreq during booting.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/qcom/clk-rpmh.c   | 2 +-
 drivers/clk/qcom/gcc-qcs404.c | 2 +-
 drivers/clk/qcom/gcc-sdm845.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/qcom/clk-rpmh.c b/drivers/clk/qcom/clk-rpmh.c
index 96a36f6ff667d..20d4258f125b9 100644
--- a/drivers/clk/qcom/clk-rpmh.c
+++ b/drivers/clk/qcom/clk-rpmh.c
@@ -487,7 +487,7 @@ static int __init clk_rpmh_init(void)
 {
 	return platform_driver_register(&clk_rpmh_driver);
 }
-subsys_initcall(clk_rpmh_init);
+core_initcall(clk_rpmh_init);
 
 static void __exit clk_rpmh_exit(void)
 {
diff --git a/drivers/clk/qcom/gcc-qcs404.c b/drivers/clk/qcom/gcc-qcs404.c
index bd32212f37e64..9b0c4ce2ef4ec 100644
--- a/drivers/clk/qcom/gcc-qcs404.c
+++ b/drivers/clk/qcom/gcc-qcs404.c
@@ -2855,7 +2855,7 @@ static int __init gcc_qcs404_init(void)
 {
 	return platform_driver_register(&gcc_qcs404_driver);
 }
-subsys_initcall(gcc_qcs404_init);
+core_initcall(gcc_qcs404_init);
 
 static void __exit gcc_qcs404_exit(void)
 {
diff --git a/drivers/clk/qcom/gcc-sdm845.c b/drivers/clk/qcom/gcc-sdm845.c
index 95be125c3bddf..49dcff1af2db1 100644
--- a/drivers/clk/qcom/gcc-sdm845.c
+++ b/drivers/clk/qcom/gcc-sdm845.c
@@ -3628,7 +3628,7 @@ static int __init gcc_sdm845_init(void)
 {
 	return platform_driver_register(&gcc_sdm845_driver);
 }
-subsys_initcall(gcc_sdm845_init);
+core_initcall(gcc_sdm845_init);
 
 static void __exit gcc_sdm845_exit(void)
 {
-- 
2.17.1

Re: [PATCH v4 5/6] clk: qcom: Initialise clock drivers earlier

[Viresh Kumar]

On 18-10-19, 14:22, Amit Kucheria wrote:
> Initialise the clock drivers on sdm845 and qcs404 in core_initcall so we
> can have earlier access to cpufreq during booting.
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> Acked-by: Stephen Boyd <sboyd@kernel.org>
> ---
>  drivers/clk/qcom/clk-rpmh.c   | 2 +-
>  drivers/clk/qcom/gcc-qcs404.c | 2 +-
>  drivers/clk/qcom/gcc-sdm845.c | 2 +-
>  3 files changed, 3 insertions(+), 3 deletions(-)

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

[PATCH v4 6/6] cpufreq: qcom-hw: Move driver initialisation earlier

[Amit Kucheria]

Allow qcom-hw driver to initialise right after the cpufreq and thermal
subsystems are initialised in core_initcall so we get earlier access to
thermal mitigation.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Taniya Das <tdas@codeaurora.org>
---
 drivers/cpufreq/qcom-cpufreq-hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index a9ae2f84a4efc..fc92a8842e252 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -334,7 +334,7 @@ static int __init qcom_cpufreq_hw_init(void)
 {
 	return platform_driver_register(&qcom_cpufreq_hw_driver);
 }
-device_initcall(qcom_cpufreq_hw_init);
+postcore_initcall(qcom_cpufreq_hw_init);
 
 static void __exit qcom_cpufreq_hw_exit(void)
 {
-- 
2.17.1

Re: [PATCH v4 6/6] cpufreq: qcom-hw: Move driver initialisation earlier

[Viresh Kumar]

On 18-10-19, 14:22, Amit Kucheria wrote:
> Allow qcom-hw driver to initialise right after the cpufreq and thermal
> subsystems are initialised in core_initcall so we get earlier access to
> thermal mitigation.
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> Acked-by: Taniya Das <tdas@codeaurora.org>
> ---
>  drivers/cpufreq/qcom-cpufreq-hw.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
> index a9ae2f84a4efc..fc92a8842e252 100644
> --- a/drivers/cpufreq/qcom-cpufreq-hw.c
> +++ b/drivers/cpufreq/qcom-cpufreq-hw.c
> @@ -334,7 +334,7 @@ static int __init qcom_cpufreq_hw_init(void)
>  {
>  	return platform_driver_register(&qcom_cpufreq_hw_driver);
>  }
> -device_initcall(qcom_cpufreq_hw_init);
> +postcore_initcall(qcom_cpufreq_hw_init);
>  
>  static void __exit qcom_cpufreq_hw_exit(void)
>  {

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

Re: [PATCH v4 6/6] cpufreq: qcom-hw: Move driver initialisation earlier

[Bjorn Andersson]

On Fri 18 Oct 01:52 PDT 2019, Amit Kucheria wrote:

> Allow qcom-hw driver to initialise right after the cpufreq and thermal
> subsystems are initialised in core_initcall so we get earlier access to
> thermal mitigation.
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
> Acked-by: Taniya Das <tdas@codeaurora.org>

Hi Amit,

Booting linux-next on my db845c (and SDM850 laptop) I can see that the
device probes in /sys/bus/platform/drivers/qcom-cpufreq-hw, but
/sys/devices/system/cpu/cpufreq is empty.

Reverting this change gives me cpufreq back. Can you please have a look
at this?

Regards,
Bjorn

> ---
>  drivers/cpufreq/qcom-cpufreq-hw.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
> index a9ae2f84a4efc..fc92a8842e252 100644
> --- a/drivers/cpufreq/qcom-cpufreq-hw.c
> +++ b/drivers/cpufreq/qcom-cpufreq-hw.c
> @@ -334,7 +334,7 @@ static int __init qcom_cpufreq_hw_init(void)
>  {
>  	return platform_driver_register(&qcom_cpufreq_hw_driver);
>  }
> -device_initcall(qcom_cpufreq_hw_init);
> +postcore_initcall(qcom_cpufreq_hw_init);
>  
>  static void __exit qcom_cpufreq_hw_exit(void)
>  {
> -- 
> 2.17.1
>