[PATCH AUTOSEL 4.9 01/99] ALSA: isight: fix leak of reference to firewire unit in error path of .probe callback

[PATCH AUTOSEL 4.9 01/99] ALSA: isight: fix leak of reference to firewire unit in error path of .probe callback

[Sasha Levin]

From: Takashi Sakamoto <o-takashi@sakamocchi.jp>

[ Upstream commit 51e68fb0929c29e47e9074ca3e99ffd6021a1c5a ]

In some error paths, reference count of firewire unit is not decreased.
This commit fixes the bug.

Fixes: 5b14ec25a79b('ALSA: firewire: release reference count of firewire unit in .remove callback of bus driver')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/firewire/isight.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/sound/firewire/isight.c b/sound/firewire/isight.c
index 48d6dca471c6b..6c8daf5b391ff 100644
--- a/sound/firewire/isight.c
+++ b/sound/firewire/isight.c
@@ -639,7 +639,7 @@ static int isight_probe(struct fw_unit *unit,
 	if (!isight->audio_base) {
 		dev_err(&unit->device, "audio unit base not found\n");
 		err = -ENXIO;
-		goto err_unit;
+		goto error;
 	}
 	fw_iso_resources_init(&isight->resources, unit);
 
@@ -668,12 +668,12 @@ static int isight_probe(struct fw_unit *unit,
 	dev_set_drvdata(&unit->device, isight);
 
 	return 0;
-
-err_unit:
-	fw_unit_put(isight->unit);
-	mutex_destroy(&isight->mutex);
 error:
 	snd_card_free(card);
+
+	mutex_destroy(&isight->mutex);
+	fw_unit_put(isight->unit);
+
 	return err;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 02/99] printk: fix integer overflow in setup_log_buf()

[Sasha Levin]

From: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>

[ Upstream commit d2130e82e9454304e9b91ba9da551b5989af8c27 ]

The way we calculate logbuf free space percentage overflows signed
integer:

	int free;

	free = __LOG_BUF_LEN - log_next_idx;
	pr_info("early log buf free: %u(%u%%)\n",
		free, (free * 100) / __LOG_BUF_LEN);

We support LOG_BUF_LEN of up to 1<<25 bytes. Since setup_log_buf() is
called during early init, logbuf is mostly empty, so

	__LOG_BUF_LEN - log_next_idx

is close to 1<<25. Thus when we multiply it by 100, we overflow signed
integer value range: 100 is 2^6 + 2^5 + 2^2.

Example, booting with LOG_BUF_LEN 1<<25 and log_buf_len=2G
boot param:

[    0.075317] log_buf_len: -2147483648 bytes
[    0.075319] early log buf free: 33549896(-28%)

Make "free" unsigned integer and use appropriate printk() specifier.

Link: http://lkml.kernel.org/r/20181010113308.9337-1-sergey.senozhatsky@gmail.com
To: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/printk/printk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 6607d77afe55a..63528399dc25d 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -1044,7 +1044,7 @@ void __init setup_log_buf(int early)
 {
 	unsigned long flags;
 	char *new_log_buf;
-	int free;
+	unsigned int free;
 
 	if (log_buf != __log_buf)
 		return;
-- 
2.20.1

[PATCH AUTOSEL 4.9 03/99] gfs2: Fix marking bitmaps non-full

[Sasha Levin]

From: Andreas Gruenbacher <agruenba@redhat.com>

[ Upstream commit ec23df2b0cf3e1620f5db77972b7fb735f267eff ]

Reservations in gfs can span multiple gfs2_bitmaps (but they won't span
multiple resource groups).  When removing a reservation, we want to
clear the GBF_FULL flags of all involved gfs2_bitmaps, not just that of
the first bitmap.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/rgrp.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index 0731267072706..65b62318fb840 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -630,7 +630,10 @@ static void __rs_deltree(struct gfs2_blkreserv *rs)
 	RB_CLEAR_NODE(&rs->rs_node);
 
 	if (rs->rs_free) {
-		struct gfs2_bitmap *bi = rbm_bi(&rs->rs_rbm);
+		u64 last_block = gfs2_rbm_to_block(&rs->rs_rbm) +
+				 rs->rs_free - 1;
+		struct gfs2_rbm last_rbm = { .rgd = rs->rs_rbm.rgd, };
+		struct gfs2_bitmap *start, *last;
 
 		/* return reserved blocks to the rgrp */
 		BUG_ON(rs->rs_rbm.rgd->rd_reserved < rs->rs_free);
@@ -641,7 +644,13 @@ static void __rs_deltree(struct gfs2_blkreserv *rs)
 		   it will force the number to be recalculated later. */
 		rgd->rd_extfail_pt += rs->rs_free;
 		rs->rs_free = 0;
-		clear_bit(GBF_FULL, &bi->bi_flags);
+		if (gfs2_rbm_from_block(&last_rbm, last_block))
+			return;
+		start = rbm_bi(&rs->rs_rbm);
+		last = rbm_bi(&last_rbm);
+		do
+			clear_bit(GBF_FULL, &start->bi_flags);
+		while (start++ != last);
 	}
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 04/99] synclink_gt(): fix compat_ioctl()

[Sasha Levin]

From: Al Viro <viro@zeniv.linux.org.uk>

[ Upstream commit 27230e51349fde075598c1b59d15e1ff802f3f6e ]

compat_ptr() for pointer-taking ones...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/synclink_gt.c | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 7aca2d4670e4a..e645ee1cfd989 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -1187,14 +1187,13 @@ static long slgt_compat_ioctl(struct tty_struct *tty,
 			 unsigned int cmd, unsigned long arg)
 {
 	struct slgt_info *info = tty->driver_data;
-	int rc = -ENOIOCTLCMD;
+	int rc;
 
 	if (sanity_check(info, tty->name, "compat_ioctl"))
 		return -ENODEV;
 	DBGINFO(("%s compat_ioctl() cmd=%08X\n", info->device_name, cmd));
 
 	switch (cmd) {
-
 	case MGSL_IOCSPARAMS32:
 		rc = set_params32(info, compat_ptr(arg));
 		break;
@@ -1214,18 +1213,11 @@ static long slgt_compat_ioctl(struct tty_struct *tty,
 	case MGSL_IOCWAITGPIO:
 	case MGSL_IOCGXSYNC:
 	case MGSL_IOCGXCTRL:
-	case MGSL_IOCSTXIDLE:
-	case MGSL_IOCTXENABLE:
-	case MGSL_IOCRXENABLE:
-	case MGSL_IOCTXABORT:
-	case TIOCMIWAIT:
-	case MGSL_IOCSIF:
-	case MGSL_IOCSXSYNC:
-	case MGSL_IOCSXCTRL:
-		rc = ioctl(tty, cmd, arg);
+		rc = ioctl(tty, cmd, (unsigned long)compat_ptr(arg));
 		break;
+	default:
+		rc = ioctl(tty, cmd, arg);
 	}
-
 	DBGINFO(("%s compat_ioctl() cmd=%08X rc=%d\n", info->device_name, cmd, rc));
 	return rc;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.9 05/99] powerpc: Fix signedness bug in update_flash_db()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 014704e6f54189a203cc14c7c0bb411b940241bc ]

The "count < sizeof(struct os_area_db)" comparison is type promoted to
size_t so negative values of "count" are treated as very high values
and we accidentally return success instead of a negative error code.

This doesn't really change runtime much but it fixes a static checker
warning.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/ps3/os-area.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c
index 3db53e8aff927..9b2ef76578f06 100644
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -664,7 +664,7 @@ static int update_flash_db(void)
 	db_set_64(db, &os_area_db_id_rtc_diff, saved_params.rtc_diff);
 
 	count = os_area_flash_write(db, sizeof(struct os_area_db), pos);
-	if (count < sizeof(struct os_area_db)) {
+	if (count < 0 || count < sizeof(struct os_area_db)) {
 		pr_debug("%s: os_area_flash_write failed %zd\n", __func__,
 			 count);
 		error = count < 0 ? count : -EIO;
-- 
2.20.1

[PATCH AUTOSEL 4.9 06/99] powerpc/eeh: Fix use of EEH_PE_KEEP on wrong field

[Sasha Levin]

From: Sam Bobroff <sbobroff@linux.ibm.com>

[ Upstream commit 473af09b56dc4be68e4af33220ceca6be67aa60d ]

eeh_add_to_parent_pe() sometimes removes the EEH_PE_KEEP flag, but it
incorrectly removes it from pe->type, instead of pe->state.

However, rather than clearing it from the correct field, remove it.
Inspection of the code shows that it can't ever have had any effect
(even if it had been cleared from the correct field), because the
field is never tested after it is cleared by the statement in
question.

The clear statement was added by commit 807a827d4e74 ("powerpc/eeh:
Keep PE during hotplug"), but it didn't explain why it was necessary.

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/eeh_pe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c
index 1abd8dd77ec13..eee2131a97e61 100644
--- a/arch/powerpc/kernel/eeh_pe.c
+++ b/arch/powerpc/kernel/eeh_pe.c
@@ -370,7 +370,7 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev)
 		while (parent) {
 			if (!(parent->type & EEH_PE_INVALID))
 				break;
-			parent->type &= ~(EEH_PE_INVALID | EEH_PE_KEEP);
+			parent->type &= ~EEH_PE_INVALID;
 			parent = parent->parent;
 		}
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 07/99] brcmsmac: AP mode: update beacon when TIM changes

[Sasha Levin]

From: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>

[ Upstream commit 2258ee58baa554609a3cc3996276e4276f537b6d ]

Beacons are not updated to reflect TIM changes. This is not compliant with
power-saving client stations as the beacons do not have valid TIM and can
cause the network to stall at random occasions and to have highly variable
latencies.
Fix it by updating beacon templates on mac80211 set_tim callback.

Addresses an issue described in:
https://marc.info/?i=20180911163534.21312d08%20()%20manjaro

Signed-off-by: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../broadcom/brcm80211/brcmsmac/mac80211_if.c | 26 +++++++++++++++++++
 .../broadcom/brcm80211/brcmsmac/main.h        |  1 +
 2 files changed, 27 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
index 7c2a9a9bc372c..a620b2f6c7c4c 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
@@ -502,6 +502,7 @@ brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 	}
 
 	spin_lock_bh(&wl->lock);
+	wl->wlc->vif = vif;
 	wl->mute_tx = false;
 	brcms_c_mute(wl->wlc, false);
 	if (vif->type == NL80211_IFTYPE_STATION)
@@ -519,6 +520,11 @@ brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 static void
 brcms_ops_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 {
+	struct brcms_info *wl = hw->priv;
+
+	spin_lock_bh(&wl->lock);
+	wl->wlc->vif = NULL;
+	spin_unlock_bh(&wl->lock);
 }
 
 static int brcms_ops_config(struct ieee80211_hw *hw, u32 changed)
@@ -937,6 +943,25 @@ static void brcms_ops_set_tsf(struct ieee80211_hw *hw,
 	spin_unlock_bh(&wl->lock);
 }
 
+static int brcms_ops_beacon_set_tim(struct ieee80211_hw *hw,
+				 struct ieee80211_sta *sta, bool set)
+{
+	struct brcms_info *wl = hw->priv;
+	struct sk_buff *beacon = NULL;
+	u16 tim_offset = 0;
+
+	spin_lock_bh(&wl->lock);
+	if (wl->wlc->vif)
+		beacon = ieee80211_beacon_get_tim(hw, wl->wlc->vif,
+						  &tim_offset, NULL);
+	if (beacon)
+		brcms_c_set_new_beacon(wl->wlc, beacon, tim_offset,
+				       wl->wlc->vif->bss_conf.dtim_period);
+	spin_unlock_bh(&wl->lock);
+
+	return 0;
+}
+
 static const struct ieee80211_ops brcms_ops = {
 	.tx = brcms_ops_tx,
 	.start = brcms_ops_start,
@@ -955,6 +980,7 @@ static const struct ieee80211_ops brcms_ops = {
 	.flush = brcms_ops_flush,
 	.get_tsf = brcms_ops_get_tsf,
 	.set_tsf = brcms_ops_set_tsf,
+	.set_tim = brcms_ops_beacon_set_tim,
 };
 
 void brcms_dpc(unsigned long data)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.h b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.h
index c4d135cff04ad..9f76b880814e8 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/main.h
@@ -563,6 +563,7 @@ struct brcms_c_info {
 
 	struct wiphy *wiphy;
 	struct scb pri_scb;
+	struct ieee80211_vif *vif;
 
 	struct sk_buff *beacon;
 	u16 beacon_tim_offset;
-- 
2.20.1

[PATCH AUTOSEL 4.9 08/99] ath10k: allocate small size dma memory in ath10k_pci_diag_write_mem

[Sasha Levin]

From: Carl Huang <cjhuang@codeaurora.org>

[ Upstream commit 0738b4998c6d1caf9ca2447b946709a7278c70f1 ]

ath10k_pci_diag_write_mem may allocate big size of the dma memory
based on the parameter nbytes. Take firmware diag download as
example, the biggest size is about 500K. In some systems, the
allocation is likely to fail because it can't acquire such a large
contiguous dma memory.

The fix is to allocate a small size dma memory. In the loop,
driver copies the data to the allocated dma memory and writes to
the destination until all the data is written.

Tested with QCA6174 PCI with
firmware-6.bin_WLAN.RM.4.4.1-00119-QCARMSWP-1, this also affects
QCA9377 PCI.

Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Reviewed-by: Brian Norris <briannorris@chomium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/pci.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 25b8d501d437e..176cf4fef6296 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1039,10 +1039,9 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	int ret = 0;
 	u32 *buf;
-	unsigned int completed_nbytes, orig_nbytes, remaining_bytes;
+	unsigned int completed_nbytes, alloc_nbytes, remaining_bytes;
 	struct ath10k_ce_pipe *ce_diag;
 	void *data_buf = NULL;
-	u32 ce_data;	/* Host buffer address in CE space */
 	dma_addr_t ce_data_base = 0;
 	int i;
 
@@ -1056,9 +1055,10 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 	 *   1) 4-byte alignment
 	 *   2) Buffer in DMA-able space
 	 */
-	orig_nbytes = nbytes;
+	alloc_nbytes = min_t(unsigned int, nbytes, DIAG_TRANSFER_LIMIT);
+
 	data_buf = (unsigned char *)dma_alloc_coherent(ar->dev,
-						       orig_nbytes,
+						       alloc_nbytes,
 						       &ce_data_base,
 						       GFP_ATOMIC);
 	if (!data_buf) {
@@ -1066,9 +1066,6 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 		goto done;
 	}
 
-	/* Copy caller's data to allocated DMA buf */
-	memcpy(data_buf, data, orig_nbytes);
-
 	/*
 	 * The address supplied by the caller is in the
 	 * Target CPU virtual address space.
@@ -1081,12 +1078,14 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 	 */
 	address = ath10k_pci_targ_cpu_to_ce_addr(ar, address);
 
-	remaining_bytes = orig_nbytes;
-	ce_data = ce_data_base;
+	remaining_bytes = nbytes;
 	while (remaining_bytes) {
 		/* FIXME: check cast */
 		nbytes = min_t(int, remaining_bytes, DIAG_TRANSFER_LIMIT);
 
+		/* Copy caller's data to allocated DMA buf */
+		memcpy(data_buf, data, nbytes);
+
 		/* Set up to receive directly into Target(!) address */
 		ret = __ath10k_ce_rx_post_buf(ce_diag, &address, address);
 		if (ret != 0)
@@ -1096,7 +1095,7 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 		 * Request CE to send caller-supplied data that
 		 * was copied to bounce buffer to Target(!) address.
 		 */
-		ret = ath10k_ce_send_nolock(ce_diag, NULL, (u32)ce_data,
+		ret = ath10k_ce_send_nolock(ce_diag, NULL, ce_data_base,
 					    nbytes, 0, 0);
 		if (ret != 0)
 			goto done;
@@ -1137,12 +1136,12 @@ int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address,
 
 		remaining_bytes -= nbytes;
 		address += nbytes;
-		ce_data += nbytes;
+		data += nbytes;
 	}
 
 done:
 	if (data_buf) {
-		dma_free_coherent(ar->dev, orig_nbytes, data_buf,
+		dma_free_coherent(ar->dev, alloc_nbytes, data_buf,
 				  ce_data_base);
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 09/99] spi: sh-msiof: fix deferred probing

[Sasha Levin]

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

[ Upstream commit f34c6e6257aa477cdfe7e9bbbecd3c5648ecda69 ]

Since commit 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
platform_get_irq() can return -EPROBE_DEFER. However, the driver overrides
an error returned by that function with -ENOENT which breaks the deferred
probing. Propagate upstream an error code returned by platform_get_irq()
and remove the bogus "platform" from the error message, while at it...

Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-sh-msiof.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index 711ea523b3251..8a69148a962a8 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -1198,8 +1198,8 @@ static int sh_msiof_spi_probe(struct platform_device *pdev)
 
 	i = platform_get_irq(pdev, 0);
 	if (i < 0) {
-		dev_err(&pdev->dev, "cannot get platform IRQ\n");
-		ret = -ENOENT;
+		dev_err(&pdev->dev, "cannot get IRQ\n");
+		ret = i;
 		goto err1;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 10/99] mmc: mediatek: fix cannot receive new request when msdc_cmd_is_ready fail

[Sasha Levin]

From: Chaotian Jing <chaotian.jing@mediatek.com>

[ Upstream commit f38a9774ddde9d79b3487dd888edd8b8623552af ]

when msdc_cmd_is_ready return fail, the req_timeout work has not been
inited and cancel_delayed_work() will return false, then, the request
return directly and never call mmc_request_done().

so need call mod_delayed_work() before msdc_cmd_is_ready()

Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/mtk-sd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 6f9535e5e584b..7fc6ce3811421 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -870,6 +870,7 @@ static void msdc_start_command(struct msdc_host *host,
 	WARN_ON(host->cmd);
 	host->cmd = cmd;
 
+	mod_delayed_work(system_wq, &host->req_timeout, DAT_TIMEOUT);
 	if (!msdc_cmd_is_ready(host, mrq, cmd))
 		return;
 
@@ -881,7 +882,6 @@ static void msdc_start_command(struct msdc_host *host,
 
 	cmd->error = 0;
 	rawcmd = msdc_cmd_prepare_raw_cmd(host, mrq, cmd);
-	mod_delayed_work(system_wq, &host->req_timeout, DAT_TIMEOUT);
 
 	sdr_set_bits(host->base + MSDC_INTEN, cmd_ints_mask);
 	writel(cmd->arg, host->base + SDC_ARG);
-- 
2.20.1

[PATCH AUTOSEL 4.9 11/99] btrfs: handle error of get_old_root

[Sasha Levin]

From: Nikolay Borisov <nborisov@suse.com>

[ Upstream commit 315bed43fea532650933e7bba316a7601d439edf ]

In btrfs_search_old_slot get_old_root is always used with the assumption
it cannot fail. However, this is not true in rare circumstance it can
fail and return null. This will lead to null point dereference when the
header is read. Fix this by checking the return value and properly
handling NULL by setting ret to -EIO and returning gracefully.

Coverity-id: 1087503
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/ctree.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 3df434eb14743..3faccbf35e9f4 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -2973,6 +2973,10 @@ int btrfs_search_old_slot(struct btrfs_root *root, struct btrfs_key *key,
 
 again:
 	b = get_old_root(root, time_seq);
+	if (!b) {
+		ret = -EIO;
+		goto done;
+	}
 	level = btrfs_header_level(b);
 	p->locks[level] = BTRFS_READ_LOCK;
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 12/99] gsmi: Fix bug in append_to_eventlog sysfs handler

[Sasha Levin]

From: Duncan Laurie <dlaurie@chromium.org>

[ Upstream commit 655603de68469adaff16842ac17a5aec9c9ce89b ]

The sysfs handler should return the number of bytes consumed, which in the
case of a successful write is the entire buffer.  Also fix a bug where
param.data_len was being set to (count - (2 * sizeof(u32))) instead of just
(count - sizeof(u32)).  The latter is correct because we skip over the
leading u32 which is our param.type, but we were also incorrectly
subtracting sizeof(u32) on the line where we were actually setting
param.data_len:

	param.data_len = count - sizeof(u32);

This meant that for our example event.kernel_software_watchdog with total
length 10 bytes, param.data_len was just 2 prior to this change.

To test, successfully append an event to the log with gsmi sysfs.
This sample event is for a "Kernel Software Watchdog"

> xxd -g 1 event.kernel_software_watchdog
0000000: 01 00 00 00 ad de 06 00 00 00

> cat event.kernel_software_watchdog > /sys/firmware/gsmi/append_to_eventlog

> mosys eventlog list | tail -1
14 | 2012-06-25 10:14:14 | Kernl Event | Software Watchdog

Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Signed-off-by: Furquan Shaikh <furquan@google.com>
Tested-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
[zwisler: updated changelog for 2nd bug fix and upstream]
Signed-off-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/google/gsmi.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/firmware/google/gsmi.c b/drivers/firmware/google/gsmi.c
index c463871609764..98cdfc2ee0dff 100644
--- a/drivers/firmware/google/gsmi.c
+++ b/drivers/firmware/google/gsmi.c
@@ -480,11 +480,10 @@ static ssize_t eventlog_write(struct file *filp, struct kobject *kobj,
 	if (count < sizeof(u32))
 		return -EINVAL;
 	param.type = *(u32 *)buf;
-	count -= sizeof(u32);
 	buf += sizeof(u32);
 
 	/* The remaining buffer is the data payload */
-	if (count > gsmi_dev.data_buf->length)
+	if ((count - sizeof(u32)) > gsmi_dev.data_buf->length)
 		return -EINVAL;
 	param.data_len = count - sizeof(u32);
 
@@ -504,7 +503,7 @@ static ssize_t eventlog_write(struct file *filp, struct kobject *kobj,
 
 	spin_unlock_irqrestore(&gsmi_dev.lock, flags);
 
-	return rc;
+	return (rc == 0) ? count : rc;
 
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 13/99] misc: mic: fix a DMA pool free failure

[Sasha Levin]

From: Wenwen Wang <wang6495@umn.edu>

[ Upstream commit 6b995f4eec34745f6cb20d66d5277611f0b3c3fa ]

In _scif_prog_signal(), the boolean variable 'x100' is used to indicate
whether the MIC Coprocessor is X100. If 'x100' is true, the status
descriptor will be used to write the value to the destination. Otherwise, a
DMA pool will be allocated for this purpose. Specifically, if the DMA pool
is allocated successfully, two memory addresses will be returned. One is
for the CPU and the other is for the device to access the DMA pool. The
former is stored to the variable 'status' and the latter is stored to the
variable 'src'. After the allocation, the address in 'src' is saved to
'status->src_dma_addr', which is actually in the DMA pool, and 'src' is
then modified.

Later on, if an error occurs, the execution flow will transfer to the label
'dma_fail', which will check 'x100' and free up the allocated DMA pool if
'x100' is false. The point here is that 'status->src_dma_addr' is used for
freeing up the DMA pool. As mentioned before, 'status->src_dma_addr' is in
the DMA pool. And thus, the device is able to modify this data. This can
potentially cause failures when freeing up the DMA pool because of the
modified device address.

This patch avoids the above issue by using the variable 'src' (with
necessary calculation) to free up the DMA pool.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/mic/scif/scif_fence.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/misc/mic/scif/scif_fence.c b/drivers/misc/mic/scif/scif_fence.c
index cac3bcc308a7e..7bb929f05d852 100644
--- a/drivers/misc/mic/scif/scif_fence.c
+++ b/drivers/misc/mic/scif/scif_fence.c
@@ -272,7 +272,7 @@ static int _scif_prog_signal(scif_epd_t epd, dma_addr_t dst, u64 val)
 dma_fail:
 	if (!x100)
 		dma_pool_free(ep->remote_dev->signal_pool, status,
-			      status->src_dma_addr);
+			      src - offsetof(struct scif_status, val));
 alloc_fail:
 	return err;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.9 14/99] m68k: fix command-line parsing when passed from u-boot

[Sasha Levin]

From: Angelo Dureghello <angelo@sysam.it>

[ Upstream commit 381fdd62c38344a771aed06adaf14aae65c47454 ]

This patch fixes command_line array zero-terminated
one byte over the end of the array, causing boot to hang.

Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/m68k/kernel/uboot.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/m68k/kernel/uboot.c b/arch/m68k/kernel/uboot.c
index b3536a82a2620..e002084af1012 100644
--- a/arch/m68k/kernel/uboot.c
+++ b/arch/m68k/kernel/uboot.c
@@ -103,5 +103,5 @@ __init void process_uboot_commandline(char *commandp, int size)
 	}
 
 	parse_uboot_commandline(commandp, len);
-	commandp[size - 1] = 0;
+	commandp[len - 1] = 0;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.9 14/99] m68k: fix command-line parsing when passed from u-boot

[Sasha Levin]

From: Angelo Dureghello <angelo@sysam.it>

[ Upstream commit 381fdd62c38344a771aed06adaf14aae65c47454 ]

This patch fixes command_line array zero-terminated
one byte over the end of the array, causing boot to hang.

Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/m68k/kernel/uboot.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/m68k/kernel/uboot.c b/arch/m68k/kernel/uboot.c
index b3536a82a2620..e002084af1012 100644
--- a/arch/m68k/kernel/uboot.c
+++ b/arch/m68k/kernel/uboot.c
@@ -103,5 +103,5 @@ __init void process_uboot_commandline(char *commandp, int size)
 	}
 
 	parse_uboot_commandline(commandp, len);
-	commandp[size - 1] = 0;
+	commandp[len - 1] = 0;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.9 15/99] amiflop: clean up on errors during setup

[Sasha Levin]

From: Omar Sandoval <osandov@fb.com>

[ Upstream commit 53d0f8dbde89cf6c862c7a62e00c6123e02cba41 ]

The error handling in fd_probe_drives() doesn't clean up at all. Fix it
up in preparation for converting to blk-mq. While we're here, get rid of
the commented out amiga_floppy_remove().

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/amiflop.c | 84 ++++++++++++++++++++---------------------
 1 file changed, 40 insertions(+), 44 deletions(-)

diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index 5fd50a2841682..db4354fb2a0d3 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -1699,11 +1699,41 @@ static const struct block_device_operations floppy_fops = {
 	.check_events	= amiga_check_events,
 };
 
+static struct gendisk *fd_alloc_disk(int drive)
+{
+	struct gendisk *disk;
+
+	disk = alloc_disk(1);
+	if (!disk)
+		goto out;
+
+	disk->queue = blk_init_queue(do_fd_request, &amiflop_lock);
+	if (IS_ERR(disk->queue)) {
+		disk->queue = NULL;
+		goto out_put_disk;
+	}
+
+	unit[drive].trackbuf = kmalloc(FLOPPY_MAX_SECTORS * 512, GFP_KERNEL);
+	if (!unit[drive].trackbuf)
+		goto out_cleanup_queue;
+
+	return disk;
+
+out_cleanup_queue:
+	blk_cleanup_queue(disk->queue);
+	disk->queue = NULL;
+out_put_disk:
+	put_disk(disk);
+out:
+	unit[drive].type->code = FD_NODRIVE;
+	return NULL;
+}
+
 static int __init fd_probe_drives(void)
 {
 	int drive,drives,nomem;
 
-	printk(KERN_INFO "FD: probing units\nfound ");
+	pr_info("FD: probing units\nfound");
 	drives=0;
 	nomem=0;
 	for(drive=0;drive<FD_MAX_UNITS;drive++) {
@@ -1711,27 +1741,17 @@ static int __init fd_probe_drives(void)
 		fd_probe(drive);
 		if (unit[drive].type->code == FD_NODRIVE)
 			continue;
-		disk = alloc_disk(1);
+
+		disk = fd_alloc_disk(drive);
 		if (!disk) {
-			unit[drive].type->code = FD_NODRIVE;
+			pr_cont(" no mem for fd%d", drive);
+			nomem = 1;
 			continue;
 		}
 		unit[drive].gendisk = disk;
-
-		disk->queue = blk_init_queue(do_fd_request, &amiflop_lock);
-		if (!disk->queue) {
-			unit[drive].type->code = FD_NODRIVE;
-			continue;
-		}
-
 		drives++;
-		if ((unit[drive].trackbuf = kmalloc(FLOPPY_MAX_SECTORS * 512, GFP_KERNEL)) == NULL) {
-			printk("no mem for ");
-			unit[drive].type = &drive_types[num_dr_types - 1]; /* FD_NODRIVE */
-			drives--;
-			nomem = 1;
-		}
-		printk("fd%d ",drive);
+
+		pr_cont(" fd%d",drive);
 		disk->major = FLOPPY_MAJOR;
 		disk->first_minor = drive;
 		disk->fops = &floppy_fops;
@@ -1742,11 +1762,11 @@ static int __init fd_probe_drives(void)
 	}
 	if ((drives > 0) || (nomem == 0)) {
 		if (drives == 0)
-			printk("no drives");
-		printk("\n");
+			pr_cont(" no drives");
+		pr_cont("\n");
 		return drives;
 	}
-	printk("\n");
+	pr_cont("\n");
 	return -ENOMEM;
 }
  
@@ -1837,30 +1857,6 @@ static int __init amiga_floppy_probe(struct platform_device *pdev)
 	return ret;
 }
 
-#if 0 /* not safe to unload */
-static int __exit amiga_floppy_remove(struct platform_device *pdev)
-{
-	int i;
-
-	for( i = 0; i < FD_MAX_UNITS; i++) {
-		if (unit[i].type->code != FD_NODRIVE) {
-			struct request_queue *q = unit[i].gendisk->queue;
-			del_gendisk(unit[i].gendisk);
-			put_disk(unit[i].gendisk);
-			kfree(unit[i].trackbuf);
-			if (q)
-				blk_cleanup_queue(q);
-		}
-	}
-	blk_unregister_region(MKDEV(FLOPPY_MAJOR, 0), 256);
-	free_irq(IRQ_AMIGA_CIAA_TB, NULL);
-	free_irq(IRQ_AMIGA_DSKBLK, NULL);
-	custom.dmacon = DMAF_DISK; /* disable DMA */
-	amiga_chip_free(raw_buf);
-	unregister_blkdev(FLOPPY_MAJOR, "fd");
-}
-#endif
-
 static struct platform_driver amiga_floppy_driver = {
 	.driver   = {
 		.name	= "amiga-floppy",
-- 
2.20.1

[PATCH AUTOSEL 4.9 16/99] scsi: ips: fix missing break in switch

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>

[ Upstream commit 5d25ff7a544889bc4b749fda31778d6a18dddbcb ]

Add missing break statement in order to prevent the code from falling
through to case TEST_UNIT_READY.

Addresses-Coverity-ID: 1357338 ("Missing break in switch")
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ips.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index 02cb76fd44208..6bbf2945a3e00 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -3500,6 +3500,7 @@ ips_send_cmd(ips_ha_t * ha, ips_scb_t * scb)
 
 		case START_STOP:
 			scb->scsi_cmd->result = DID_OK << 16;
+			break;
 
 		case TEST_UNIT_READY:
 		case INQUIRY:
-- 
2.20.1

[PATCH AUTOSEL 4.9 17/99] KVM/x86: Fix invvpid and invept register operand size in 64-bit mode

[Sasha Levin]

From: Uros Bizjak <ubizjak@gmail.com>

[ Upstream commit 5ebb272b2ea7e02911a03a893f8d922d49f9bb4a ]

Register operand size of invvpid and invept instruction in 64-bit mode
has always 64 bits. Adjust inline function argument type to reflect
correct size.

Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kvm/vmx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 6b66d1f0d1859..b33d6f27399c8 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1547,7 +1547,7 @@ static int __find_msr_index(struct vcpu_vmx *vmx, u32 msr)
 	return -1;
 }
 
-static inline void __invvpid(int ext, u16 vpid, gva_t gva)
+static inline void __invvpid(unsigned long ext, u16 vpid, gva_t gva)
 {
     struct {
 	u64 vpid : 16;
@@ -1561,7 +1561,7 @@ static inline void __invvpid(int ext, u16 vpid, gva_t gva)
 		  : : "a"(&operand), "c"(ext) : "cc", "memory");
 }
 
-static inline void __invept(int ext, u64 eptp, gpa_t gpa)
+static inline void __invept(unsigned long ext, u64 eptp, gpa_t gpa)
 {
 	struct {
 		u64 eptp, gpa;
-- 
2.20.1

[PATCH AUTOSEL 4.9 18/99] scsi: isci: Use proper enumerated type in atapi_d2h_reg_frame_handler

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit e9e9a103528c7e199ead6e5374c9c52cf16b5802 ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/scsi/isci/request.c:1629:13: warning: implicit conversion from
enumeration type 'enum sci_io_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
                        status = SCI_IO_FAILURE_RESPONSE_VALID;
                               ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/isci/request.c:1631:12: warning: implicit conversion from
enumeration type 'enum sci_io_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
                status = SCI_IO_FAILURE_RESPONSE_VALID;
                       ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~

status is of type sci_status but SCI_IO_FAILURE_RESPONSE_VALID is of
type sci_io_status. Use SCI_FAILURE_IO_RESPONSE_VALID, which is from
sci_status and has SCI_IO_FAILURE_RESPONSE_VALID's exact value since
that is what SCI_IO_FAILURE_RESPONSE_VALID is mapped to in the isci.h
file.

Link: https://github.com/ClangBuiltLinux/linux/issues/153
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/isci/request.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index b709d2b208809..7d71ca421751d 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -1626,9 +1626,9 @@ static enum sci_status atapi_d2h_reg_frame_handler(struct isci_request *ireq,
 
 	if (status == SCI_SUCCESS) {
 		if (ireq->stp.rsp.status & ATA_ERR)
-			status = SCI_IO_FAILURE_RESPONSE_VALID;
+			status = SCI_FAILURE_IO_RESPONSE_VALID;
 	} else {
-		status = SCI_IO_FAILURE_RESPONSE_VALID;
+		status = SCI_FAILURE_IO_RESPONSE_VALID;
 	}
 
 	if (status != SCI_SUCCESS) {
-- 
2.20.1

[PATCH AUTOSEL 4.9 19/99] scsi: isci: Change sci_controller_start_task's return type to sci_status

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 362b5da3dfceada6e74ecdd7af3991bbe42c0c0f ]

Clang warns when an enumerated type is implicitly converted to another.

drivers/scsi/isci/request.c:3476:13: warning: implicit conversion from
enumeration type 'enum sci_task_status' to different enumeration type
'enum sci_status' [-Wenum-conversion]
                        status = sci_controller_start_task(ihost,
                               ~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/isci/host.c:2744:10: warning: implicit conversion from
enumeration type 'enum sci_status' to different enumeration type 'enum
sci_task_status' [-Wenum-conversion]
                return SCI_SUCCESS;
                ~~~~~~ ^~~~~~~~~~~
drivers/scsi/isci/host.c:2753:9: warning: implicit conversion from
enumeration type 'enum sci_status' to different enumeration type 'enum
sci_task_status' [-Wenum-conversion]
        return status;
        ~~~~~~ ^~~~~~

Avoid all of these implicit conversion by just making
sci_controller_start_task use sci_status. This silences
Clang and has no functional change since sci_task_status
has all of its values mapped to something in sci_status.

Link: https://github.com/ClangBuiltLinux/linux/issues/153
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/isci/host.c | 8 ++++----
 drivers/scsi/isci/host.h | 2 +-
 drivers/scsi/isci/task.c | 4 ++--
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index 609dafd661d14..da4583a2fa23e 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -2717,9 +2717,9 @@ enum sci_status sci_controller_continue_io(struct isci_request *ireq)
  *    the task management request.
  * @task_request: the handle to the task request object to start.
  */
-enum sci_task_status sci_controller_start_task(struct isci_host *ihost,
-					       struct isci_remote_device *idev,
-					       struct isci_request *ireq)
+enum sci_status sci_controller_start_task(struct isci_host *ihost,
+					  struct isci_remote_device *idev,
+					  struct isci_request *ireq)
 {
 	enum sci_status status;
 
@@ -2728,7 +2728,7 @@ enum sci_task_status sci_controller_start_task(struct isci_host *ihost,
 			 "%s: SCIC Controller starting task from invalid "
 			 "state\n",
 			 __func__);
-		return SCI_TASK_FAILURE_INVALID_STATE;
+		return SCI_FAILURE_INVALID_STATE;
 	}
 
 	status = sci_remote_device_start_task(ihost, idev, ireq);
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 22a9bb1abae14..15dc6e0d8deb0 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -490,7 +490,7 @@ enum sci_status sci_controller_start_io(
 	struct isci_remote_device *idev,
 	struct isci_request *ireq);
 
-enum sci_task_status sci_controller_start_task(
+enum sci_status sci_controller_start_task(
 	struct isci_host *ihost,
 	struct isci_remote_device *idev,
 	struct isci_request *ireq);
diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c
index 6dcaed0c1fc8c..fb6eba331ac6e 100644
--- a/drivers/scsi/isci/task.c
+++ b/drivers/scsi/isci/task.c
@@ -258,7 +258,7 @@ static int isci_task_execute_tmf(struct isci_host *ihost,
 				 struct isci_tmf *tmf, unsigned long timeout_ms)
 {
 	DECLARE_COMPLETION_ONSTACK(completion);
-	enum sci_task_status status = SCI_TASK_FAILURE;
+	enum sci_status status = SCI_FAILURE;
 	struct isci_request *ireq;
 	int ret = TMF_RESP_FUNC_FAILED;
 	unsigned long flags;
@@ -301,7 +301,7 @@ static int isci_task_execute_tmf(struct isci_host *ihost,
 	/* start the TMF io. */
 	status = sci_controller_start_task(ihost, idev, ireq);
 
-	if (status != SCI_TASK_SUCCESS) {
+	if (status != SCI_SUCCESS) {
 		dev_dbg(&ihost->pdev->dev,
 			 "%s: start_io failed - status = 0x%x, request = %p\n",
 			 __func__,
-- 
2.20.1

[PATCH AUTOSEL 4.9 20/99] scsi: iscsi_tcp: Explicitly cast param in iscsi_sw_tcp_host_get_param

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 20054597f169090109fc3f0dfa1a48583f4178a4 ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/scsi/iscsi_tcp.c:803:15: warning: implicit conversion from
enumeration type 'enum iscsi_host_param' to different enumeration type
'enum iscsi_param' [-Wenum-conversion]
                                                 &addr, param, buf);
                                                        ^~~~~
1 warning generated.

iscsi_conn_get_addr_param handles ISCSI_HOST_PARAM_IPADDRESS just fine
so add an explicit cast to iscsi_param to make it clear to Clang that
this is expected behavior.

Link: https://github.com/ClangBuiltLinux/linux/issues/153
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/iscsi_tcp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index ace4f1f41b8e0..d60564397be54 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -798,7 +798,8 @@ static int iscsi_sw_tcp_host_get_param(struct Scsi_Host *shost,
 			return rc;
 
 		return iscsi_conn_get_addr_param((struct sockaddr_storage *)
-						 &addr, param, buf);
+						 &addr,
+						 (enum iscsi_param)param, buf);
 	default:
 		return iscsi_host_get_param(shost, param, buf);
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.9 21/99] clk: mmp2: fix the clock id for sdh2_clk and sdh3_clk

[Sasha Levin]

From: Lubomir Rintel <lkundrak@v3.sk>

[ Upstream commit 4917fb90eec7c26dac1497ada3bd4a325f670fcc ]

A typo that makes it impossible to get the correct clocks for
MMP2_CLK_SDH2 and MMP2_CLK_SDH3.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Fixes: 1ec770d92a62 ("clk: mmp: add mmp2 DT support for clock driver")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/mmp/clk-of-mmp2.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index 9adaf48aea231..061a9f10218b3 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -227,8 +227,8 @@ static struct mmp_param_gate_clk apmu_gate_clks[] = {
 	/* The gate clocks has mux parent. */
 	{MMP2_CLK_SDH0, "sdh0_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH0, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
 	{MMP2_CLK_SDH1, "sdh1_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH1, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
-	{MMP2_CLK_SDH1, "sdh2_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH2, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
-	{MMP2_CLK_SDH1, "sdh3_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH3, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+	{MMP2_CLK_SDH2, "sdh2_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH2, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
+	{MMP2_CLK_SDH3, "sdh3_clk", "sdh_mix_clk", CLK_SET_RATE_PARENT, APMU_SDH3, 0x1b, 0x1b, 0x0, 0, &sdh_lock},
 	{MMP2_CLK_DISP0, "disp0_clk", "disp0_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1b, 0x1b, 0x0, 0, &disp0_lock},
 	{MMP2_CLK_DISP0_SPHY, "disp0_sphy_clk", "disp0_sphy_div", CLK_SET_RATE_PARENT, APMU_DISP0, 0x1024, 0x1024, 0x0, 0, &disp0_lock},
 	{MMP2_CLK_DISP1, "disp1_clk", "disp1_div", CLK_SET_RATE_PARENT, APMU_DISP1, 0x1b, 0x1b, 0x0, 0, &disp1_lock},
-- 
2.20.1

[PATCH AUTOSEL 4.9 22/99] ASoC: tegra_sgtl5000: fix device_node refcounting

[Sasha Levin]

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

[ Upstream commit a85227da2dcc291b762c8482a505bc7d0d2d4b07 ]

Similar to the following:

commit 4321723648b0 ("ASoC: tegra_alc5632: fix device_node refcounting")

commit 7c5dfd549617 ("ASoC: tegra: fix device_node refcounting")

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/tegra/tegra_sgtl5000.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/sound/soc/tegra/tegra_sgtl5000.c b/sound/soc/tegra/tegra_sgtl5000.c
index 1e76869dd4880..863e04809a6b8 100644
--- a/sound/soc/tegra/tegra_sgtl5000.c
+++ b/sound/soc/tegra/tegra_sgtl5000.c
@@ -152,14 +152,14 @@ static int tegra_sgtl5000_driver_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev,
 			"Property 'nvidia,i2s-controller' missing/invalid\n");
 		ret = -EINVAL;
-		goto err;
+		goto err_put_codec_of_node;
 	}
 
 	tegra_sgtl5000_dai.platform_of_node = tegra_sgtl5000_dai.cpu_of_node;
 
 	ret = tegra_asoc_utils_init(&machine->util_data, &pdev->dev);
 	if (ret)
-		goto err;
+		goto err_put_cpu_of_node;
 
 	ret = snd_soc_register_card(card);
 	if (ret) {
@@ -172,6 +172,13 @@ static int tegra_sgtl5000_driver_probe(struct platform_device *pdev)
 
 err_fini_utils:
 	tegra_asoc_utils_fini(&machine->util_data);
+err_put_cpu_of_node:
+	of_node_put(tegra_sgtl5000_dai.cpu_of_node);
+	tegra_sgtl5000_dai.cpu_of_node = NULL;
+	tegra_sgtl5000_dai.platform_of_node = NULL;
+err_put_codec_of_node:
+	of_node_put(tegra_sgtl5000_dai.codec_of_node);
+	tegra_sgtl5000_dai.codec_of_node = NULL;
 err:
 	return ret;
 }
@@ -186,6 +193,12 @@ static int tegra_sgtl5000_driver_remove(struct platform_device *pdev)
 
 	tegra_asoc_utils_fini(&machine->util_data);
 
+	of_node_put(tegra_sgtl5000_dai.cpu_of_node);
+	tegra_sgtl5000_dai.cpu_of_node = NULL;
+	tegra_sgtl5000_dai.platform_of_node = NULL;
+	of_node_put(tegra_sgtl5000_dai.codec_of_node);
+	tegra_sgtl5000_dai.codec_of_node = NULL;
+
 	return ret;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 23/99] scsi: dc395x: fix dma API usage in srb_done

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 3a5bd7021184dec2946f2a4d7a8943f8a5713e52 ]

We can't just transfer ownership to the CPU and then unmap, as this will
break with swiotlb.

Instead unmap the command and sense buffer a little earlier in the I/O
completion handler and get rid of the pci_dma_sync_sg_for_cpu call
entirely.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/dc395x.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 5ee7f44cf869b..9da0ac360848f 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -3450,14 +3450,12 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
 		}
 	}
 
-	if (dir != PCI_DMA_NONE && scsi_sg_count(cmd))
-		pci_dma_sync_sg_for_cpu(acb->dev, scsi_sglist(cmd),
-					scsi_sg_count(cmd), dir);
-
 	ckc_only = 0;
 /* Check Error Conditions */
       ckc_e:
 
+	pci_unmap_srb(acb, srb);
+
 	if (cmd->cmnd[0] == INQUIRY) {
 		unsigned char *base = NULL;
 		struct ScsiInqData *ptr;
@@ -3511,7 +3509,6 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
 			cmd, cmd->result);
 		srb_free_insert(acb, srb);
 	}
-	pci_unmap_srb(acb, srb);
 
 	cmd->scsi_done(cmd);
 	waiting_process_next(acb);
-- 
2.20.1

[PATCH AUTOSEL 4.9 24/99] scsi: dc395x: fix DMA API usage in sg_update_list

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 6c404a68bf83b4135a8a9aa1c388ebdf98e8ba7f ]

We need to transfer device ownership to the CPU before we can manipulate
the mapped data.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/dc395x.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 9da0ac360848f..830b2d2dcf206 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -1972,6 +1972,11 @@ static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
 			xferred -= psge->length;
 		} else {
 			/* Partial SG entry done */
+			pci_dma_sync_single_for_cpu(srb->dcb->
+					    acb->dev,
+					    srb->sg_bus_addr,
+					    SEGMENTX_LEN,
+					    PCI_DMA_TODEVICE);
 			psge->length -= xferred;
 			psge->address += xferred;
 			srb->sg_index = idx;
-- 
2.20.1

[PATCH AUTOSEL 4.9 25/99] net: fix warning in af_unix

[Sasha Levin]

From: Kyeongdon Kim <kyeongdon.kim@lge.com>

[ Upstream commit 33c4368ee2589c165aebd8d388cbd91e9adb9688 ]

This fixes the "'hash' may be used uninitialized in this function"

net/unix/af_unix.c:1041:20: warning: 'hash' may be used uninitialized in this function [-Wmaybe-uninitialized]
  addr->hash = hash ^ sk->sk_type;

Signed-off-by: Kyeongdon Kim <kyeongdon.kim@lge.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/unix/af_unix.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index cecf51a5aec4f..32ae82a5596d9 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -224,6 +224,8 @@ static inline void unix_release_addr(struct unix_address *addr)
 
 static int unix_mkname(struct sockaddr_un *sunaddr, int len, unsigned int *hashp)
 {
+	*hashp = 0;
+
 	if (len <= sizeof(short) || len > sizeof(*sunaddr))
 		return -EINVAL;
 	if (!sunaddr || sunaddr->sun_family != AF_UNIX)
-- 
2.20.1

[PATCH AUTOSEL 4.9 26/99] net: ena: Fix Kconfig dependency on X86

[Sasha Levin]

From: Netanel Belgazal <netanel@amazon.com>

[ Upstream commit 8c590f9776386b8f697fd0b7ed6142ae6e3de79e ]

The Kconfig limitation of X86 is to too wide.
The ENA driver only requires a little endian dependency.

Change the dependency to be on little endian CPU.

Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amazon/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/amazon/Kconfig b/drivers/net/ethernet/amazon/Kconfig
index 99b30353541ab..9e87d7b8360f5 100644
--- a/drivers/net/ethernet/amazon/Kconfig
+++ b/drivers/net/ethernet/amazon/Kconfig
@@ -17,7 +17,7 @@ if NET_VENDOR_AMAZON
 
 config ENA_ETHERNET
 	tristate "Elastic Network Adapter (ENA) support"
-	depends on (PCI_MSI && X86)
+	depends on PCI_MSI && !CPU_BIG_ENDIAN
 	---help---
 	  This driver supports Elastic Network Adapter (ENA)"
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 27/99] xfs: fix use-after-free race in xfs_buf_rele

[Sasha Levin]

From: Dave Chinner <dchinner@redhat.com>

[ Upstream commit 37fd1678245f7a5898c1b05128bc481fb403c290 ]

When looking at a 4.18 based KASAN use after free report, I noticed
that racing xfs_buf_rele() may race on dropping the last reference
to the buffer and taking the buffer lock. This was the symptom
displayed by the KASAN report, but the actual issue that was
reported had already been fixed in 4.19-rc1 by commit e339dd8d8b04
("xfs: use sync buffer I/O for sync delwri queue submission").

Despite this, I think there is still an issue with xfs_buf_rele()
in this code:

        release = atomic_dec_and_lock(&bp->b_hold, &pag->pag_buf_lock);
        spin_lock(&bp->b_lock);
        if (!release) {
.....

If two threads race on the b_lock after both dropping a reference
and one getting dropping the last reference so release = true, we
end up with:

CPU 0				CPU 1
atomic_dec_and_lock()
				atomic_dec_and_lock()
				spin_lock(&bp->b_lock)
spin_lock(&bp->b_lock)
<spins>
				<release = true bp->b_lru_ref = 0>
				<remove from lists>
				freebuf = true
				spin_unlock(&bp->b_lock)
				xfs_buf_free(bp)
<gets lock, reading and writing freed memory>
<accesses freed memory>
spin_unlock(&bp->b_lock) <reads/writes freed memory>

IOWs, we can't safely take bp->b_lock after dropping the hold
reference because the buffer may go away at any time after we
drop that reference. However, this can be fixed simply by taking the
bp->b_lock before we drop the reference.

It is safe to nest the pag_buf_lock inside bp->b_lock as the
pag_buf_lock is only used to serialise against lookup in
xfs_buf_find() and no other locks are held over or under the
pag_buf_lock there. Make this clear by documenting the buffer lock
orders at the top of the file.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/xfs_buf.c | 38 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c
index 651755353374d..0b58b9d419e84 100644
--- a/fs/xfs/xfs_buf.c
+++ b/fs/xfs/xfs_buf.c
@@ -57,6 +57,32 @@ static kmem_zone_t *xfs_buf_zone;
 #define xb_to_gfp(flags) \
 	((((flags) & XBF_READ_AHEAD) ? __GFP_NORETRY : GFP_NOFS) | __GFP_NOWARN)
 
+/*
+ * Locking orders
+ *
+ * xfs_buf_ioacct_inc:
+ * xfs_buf_ioacct_dec:
+ *	b_sema (caller holds)
+ *	  b_lock
+ *
+ * xfs_buf_stale:
+ *	b_sema (caller holds)
+ *	  b_lock
+ *	    lru_lock
+ *
+ * xfs_buf_rele:
+ *	b_lock
+ *	  pag_buf_lock
+ *	    lru_lock
+ *
+ * xfs_buftarg_wait_rele
+ *	lru_lock
+ *	  b_lock (trylock due to inversion)
+ *
+ * xfs_buftarg_isolate
+ *	lru_lock
+ *	  b_lock (trylock due to inversion)
+ */
 
 static inline int
 xfs_buf_is_vmapped(
@@ -957,8 +983,18 @@ xfs_buf_rele(
 
 	ASSERT(atomic_read(&bp->b_hold) > 0);
 
-	release = atomic_dec_and_lock(&bp->b_hold, &pag->pag_buf_lock);
+	/*
+	 * We grab the b_lock here first to serialise racing xfs_buf_rele()
+	 * calls. The pag_buf_lock being taken on the last reference only
+	 * serialises against racing lookups in xfs_buf_find(). IOWs, the second
+	 * to last reference we drop here is not serialised against the last
+	 * reference until we take bp->b_lock. Hence if we don't grab b_lock
+	 * first, the last "release" reference can win the race to the lock and
+	 * free the buffer before the second-to-last reference is processed,
+	 * leading to a use-after-free scenario.
+	 */
 	spin_lock(&bp->b_lock);
+	release = atomic_dec_and_lock(&bp->b_hold, &pag->pag_buf_lock);
 	if (!release) {
 		/*
 		 * Drop the in-flight state if the buffer is already on the LRU
-- 
2.20.1

[PATCH AUTOSEL 4.9 28/99] kprobes, x86/ptrace.h: Make regs_get_kernel_stack_nth() not fault on bad stack

[Sasha Levin]

From: "Steven Rostedt (VMware)" <rostedt@goodmis.org>

[ Upstream commit c2712b858187f5bcd7b042fe4daa3ba3a12635c0 ]

Andy had some concerns about using regs_get_kernel_stack_nth() in a new
function regs_get_kernel_argument() as if there's any error in the stack
code, it could cause a bad memory access. To be on the safe side, call
probe_kernel_read() on the stack address to be extra careful in accessing
the memory. A helper function, regs_get_kernel_stack_nth_addr(), was added
to just return the stack address (or NULL if not on the stack), that will be
used to find the address (and could be used by other functions) and read the
address with kernel_probe_read().

Requested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181017165951.09119177@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/ptrace.h | 42 +++++++++++++++++++++++++++++------
 1 file changed, 35 insertions(+), 7 deletions(-)

diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
index ea78a8438a8af..fb489cd848faa 100644
--- a/arch/x86/include/asm/ptrace.h
+++ b/arch/x86/include/asm/ptrace.h
@@ -199,24 +199,52 @@ static inline int regs_within_kernel_stack(struct pt_regs *regs,
 		(kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1)));
 }
 
+/**
+ * regs_get_kernel_stack_nth_addr() - get the address of the Nth entry on stack
+ * @regs:	pt_regs which contains kernel stack pointer.
+ * @n:		stack entry number.
+ *
+ * regs_get_kernel_stack_nth() returns the address of the @n th entry of the
+ * kernel stack which is specified by @regs. If the @n th entry is NOT in
+ * the kernel stack, this returns NULL.
+ */
+static inline unsigned long *regs_get_kernel_stack_nth_addr(struct pt_regs *regs, unsigned int n)
+{
+	unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
+
+	addr += n;
+	if (regs_within_kernel_stack(regs, (unsigned long)addr))
+		return addr;
+	else
+		return NULL;
+}
+
+/* To avoid include hell, we can't include uaccess.h */
+extern long probe_kernel_read(void *dst, const void *src, size_t size);
+
 /**
  * regs_get_kernel_stack_nth() - get Nth entry of the stack
  * @regs:	pt_regs which contains kernel stack pointer.
  * @n:		stack entry number.
  *
  * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which
- * is specified by @regs. If the @n th entry is NOT in the kernel stack,
+ * is specified by @regs. If the @n th entry is NOT in the kernel stack
  * this returns 0.
  */
 static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
 						      unsigned int n)
 {
-	unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
-	addr += n;
-	if (regs_within_kernel_stack(regs, (unsigned long)addr))
-		return *addr;
-	else
-		return 0;
+	unsigned long *addr;
+	unsigned long val;
+	long ret;
+
+	addr = regs_get_kernel_stack_nth_addr(regs, n);
+	if (addr) {
+		ret = probe_kernel_read(&val, addr, sizeof(val));
+		if (!ret)
+			return val;
+	}
+	return 0;
 }
 
 #define arch_has_single_step()	(1)
-- 
2.20.1

[PATCH AUTOSEL 4.9 29/99] ALSA: i2c/cs8427: Fix int to char conversion

[Sasha Levin]

From: Philipp Klocke <philipp97kl@gmail.com>

[ Upstream commit eb7ebfa3c1989aa8e59d5e68ab3cddd7df1bfb27 ]

Compiling with clang yields the following warning:

sound/i2c/cs8427.c:140:31: warning: implicit conversion from 'int'
to 'char' changes value from 160 to -96 [-Wconstant-conversion]
    data[0] = CS8427_REG_AUTOINC | CS8427_REG_CORU_DATABUF;
            ~ ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~

Because CS8427_REG_AUTOINC is defined as 128, it is too big for a
char field.
So change data from char to unsigned char, that it can hold the value.

This patch does not change the generated code.

Signed-off-by: Philipp Klocke <philipp97kl@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/i2c/cs8427.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/i2c/cs8427.c b/sound/i2c/cs8427.c
index 7e21621e492a4..7fd1b40008838 100644
--- a/sound/i2c/cs8427.c
+++ b/sound/i2c/cs8427.c
@@ -118,7 +118,7 @@ static int snd_cs8427_send_corudata(struct snd_i2c_device *device,
 	struct cs8427 *chip = device->private_data;
 	char *hw_data = udata ?
 		chip->playback.hw_udata : chip->playback.hw_status;
-	char data[32];
+	unsigned char data[32];
 	int err, idx;
 
 	if (!memcmp(hw_data, ndata, count))
-- 
2.20.1

[PATCH AUTOSEL 4.9 30/99] macintosh/windfarm_smu_sat: Fix debug output

[Sasha Levin]

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>

[ Upstream commit fc0c8b36d379a046525eacb9c3323ca635283757 ]

There's some antiquated debug output that's trying
to do a hand-made hexdump and turning into horrible
1-byte-per-line output these days.

Use print_hex_dump() instead

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/macintosh/windfarm_smu_sat.c | 25 +++++++------------------
 1 file changed, 7 insertions(+), 18 deletions(-)

diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c
index ad6223e883404..3d310dd60a0be 100644
--- a/drivers/macintosh/windfarm_smu_sat.c
+++ b/drivers/macintosh/windfarm_smu_sat.c
@@ -22,14 +22,6 @@
 
 #define VERSION "1.0"
 
-#define DEBUG
-
-#ifdef DEBUG
-#define DBG(args...)	printk(args)
-#else
-#define DBG(args...)	do { } while(0)
-#endif
-
 /* If the cache is older than 800ms we'll refetch it */
 #define MAX_AGE		msecs_to_jiffies(800)
 
@@ -106,13 +98,10 @@ struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id,
 		buf[i+2] = data[3];
 		buf[i+3] = data[2];
 	}
-#ifdef DEBUG
-	DBG(KERN_DEBUG "sat %d partition %x:", sat_id, id);
-	for (i = 0; i < len; ++i)
-		DBG(" %x", buf[i]);
-	DBG("\n");
-#endif
 
+	printk(KERN_DEBUG "sat %d partition %x:", sat_id, id);
+	print_hex_dump(KERN_DEBUG, "  ", DUMP_PREFIX_OFFSET,
+		       16, 1, buf, len, false);
 	if (size)
 		*size = len;
 	return (struct smu_sdbp_header *) buf;
@@ -132,13 +121,13 @@ static int wf_sat_read_cache(struct wf_sat *sat)
 	if (err < 0)
 		return err;
 	sat->last_read = jiffies;
+
 #ifdef LOTSA_DEBUG
 	{
 		int i;
-		DBG(KERN_DEBUG "wf_sat_get: data is");
-		for (i = 0; i < 16; ++i)
-			DBG(" %.2x", sat->cache[i]);
-		DBG("\n");
+		printk(KERN_DEBUG "wf_sat_get: data is");
+		print_hex_dump(KERN_DEBUG, "  ", DUMP_PREFIX_OFFSET,
+			       16, 1, sat->cache, 16, false);
 	}
 #endif
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.9 31/99] USB: misc: appledisplay: fix backlight update_status return code

[Sasha Levin]

From: Mattias Jacobsson <2pi@mok.nu>

[ Upstream commit 090158555ff8d194a98616034100b16697dd80d0 ]

Upon success the update_status handler returns a positive number
corresponding to the number of bytes transferred by usb_control_msg.
However the return code of the update_status handler should indicate if
an error occurred(negative) or how many bytes of the user's input to sysfs
that was consumed. Return code zero indicates all bytes were consumed.

The bug can for example result in the update_status handler being called
twice, the second time with only the "unconsumed" part of the user's input
to sysfs. Effectively setting an incorrect brightness.

Change the update_status handler to return zero for all successful
transactions and forward usb_control_msg's error code upon failure.

Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/misc/appledisplay.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
index b8092bcf89a29..140af7754c1e6 100644
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -160,8 +160,11 @@ static int appledisplay_bl_update_status(struct backlight_device *bd)
 		pdata->msgdata, 2,
 		ACD_USB_TIMEOUT);
 	mutex_unlock(&pdata->sysfslock);
-	
-	return retval;
+
+	if (retval < 0)
+		return retval;
+	else
+		return 0;
 }
 
 static int appledisplay_bl_get_brightness(struct backlight_device *bd)
-- 
2.20.1

[PATCH AUTOSEL 4.9 32/99] usbip: tools: fix atoi() on non-null terminated string

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit e325808c0051b16729ffd472ff887c6cae5c6317 ]

Currently the call to atoi is being passed a single char string
that is not null terminated, so there is a potential read overrun
along the stack when parsing for an integer value.  Fix this by
instead using a 2 char string that is initialized to all zeros
to ensure that a 1 char read into the string is always terminated
with a \0.

Detected by cppcheck:
"Invalid atoi() argument nr 1. A nul-terminated string is required."

Fixes: 3391ba0e2792 ("usbip: tools: Extract generic code to be shared with vudc backend")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/usb/usbip/libsrc/usbip_host_common.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/tools/usb/usbip/libsrc/usbip_host_common.c b/tools/usb/usbip/libsrc/usbip_host_common.c
index 6ff7b601f8545..f5ad219a324e8 100644
--- a/tools/usb/usbip/libsrc/usbip_host_common.c
+++ b/tools/usb/usbip/libsrc/usbip_host_common.c
@@ -43,7 +43,7 @@ static int32_t read_attr_usbip_status(struct usbip_usb_device *udev)
 	int size;
 	int fd;
 	int length;
-	char status;
+	char status[2] = { 0 };
 	int value = 0;
 
 	size = snprintf(status_attr_path, sizeof(status_attr_path),
@@ -61,14 +61,14 @@ static int32_t read_attr_usbip_status(struct usbip_usb_device *udev)
 		return -1;
 	}
 
-	length = read(fd, &status, 1);
+	length = read(fd, status, 1);
 	if (length < 0) {
 		err("error reading attribute %s", status_attr_path);
 		close(fd);
 		return -1;
 	}
 
-	value = atoi(&status);
+	value = atoi(status);
 
 	return value;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.9 33/99] SUNRPC: Fix a compile warning for cmpxchg64()

[Sasha Levin]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit e732f4485a150492b286f3efc06f9b34dd6b9995 ]

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/auth_gss/gss_krb5_seal.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/sunrpc/auth_gss/gss_krb5_seal.c b/net/sunrpc/auth_gss/gss_krb5_seal.c
index 1d74d653e6c05..ad0dcb69395d7 100644
--- a/net/sunrpc/auth_gss/gss_krb5_seal.c
+++ b/net/sunrpc/auth_gss/gss_krb5_seal.c
@@ -63,6 +63,7 @@
 #include <linux/sunrpc/gss_krb5.h>
 #include <linux/random.h>
 #include <linux/crypto.h>
+#include <linux/atomic.h>
 
 #if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
 # define RPCDBG_FACILITY        RPCDBG_AUTH
-- 
2.20.1

[PATCH AUTOSEL 4.9 34/99] sunrpc: safely reallow resvport min/max inversion

[Sasha Levin]

From: "J. Bruce Fields" <bfields@redhat.com>

[ Upstream commit 826799e66e8683e5698e140bb9ef69afc8c0014e ]

Commits ffb6ca33b04b and e08ea3a96fc7 prevent setting xprt_min_resvport
greater than xprt_max_resvport, but may also break simple code that sets
one parameter then the other, if the new range does not overlap the old.

Also it looks racy to me, unless there's some serialization I'm not
seeing.  Granted it would probably require malicious privileged processes
(unless there's a chance these might eventually be settable in unprivileged
containers), but still it seems better not to let userspace panic the
kernel.

Simpler seems to be to allow setting the parameters to whatever you want
but interpret xprt_min_resvport > xprt_max_resvport as the empty range.

Fixes: ffb6ca33b04b "sunrpc: Prevent resvport min/max inversion..."
Fixes: e08ea3a96fc7 "sunrpc: Prevent rexvport min/max inversion..."
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/xprtsock.c | 34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)

diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index 280fb31787084..f3f05148922a1 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -124,7 +124,7 @@ static struct ctl_table xs_tunables_table[] = {
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
 		.extra1		= &xprt_min_resvport_limit,
-		.extra2		= &xprt_max_resvport
+		.extra2		= &xprt_max_resvport_limit
 	},
 	{
 		.procname	= "max_resvport",
@@ -132,7 +132,7 @@ static struct ctl_table xs_tunables_table[] = {
 		.maxlen		= sizeof(unsigned int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= &xprt_min_resvport,
+		.extra1		= &xprt_min_resvport_limit,
 		.extra2		= &xprt_max_resvport_limit
 	},
 	{
@@ -1737,11 +1737,17 @@ static void xs_udp_timer(struct rpc_xprt *xprt, struct rpc_task *task)
 	xprt_adjust_cwnd(xprt, task, -ETIMEDOUT);
 }
 
-static unsigned short xs_get_random_port(void)
+static int xs_get_random_port(void)
 {
-	unsigned short range = xprt_max_resvport - xprt_min_resvport + 1;
-	unsigned short rand = (unsigned short) prandom_u32() % range;
-	return rand + xprt_min_resvport;
+	unsigned short min = xprt_min_resvport, max = xprt_max_resvport;
+	unsigned short range;
+	unsigned short rand;
+
+	if (max < min)
+		return -EADDRINUSE;
+	range = max - min + 1;
+	rand = (unsigned short) prandom_u32() % range;
+	return rand + min;
 }
 
 /**
@@ -1798,9 +1804,9 @@ static void xs_set_srcport(struct sock_xprt *transport, struct socket *sock)
 		transport->srcport = xs_sock_getport(sock);
 }
 
-static unsigned short xs_get_srcport(struct sock_xprt *transport)
+static int xs_get_srcport(struct sock_xprt *transport)
 {
-	unsigned short port = transport->srcport;
+	int port = transport->srcport;
 
 	if (port == 0 && transport->xprt.resvport)
 		port = xs_get_random_port();
@@ -1821,7 +1827,7 @@ static int xs_bind(struct sock_xprt *transport, struct socket *sock)
 {
 	struct sockaddr_storage myaddr;
 	int err, nloop = 0;
-	unsigned short port = xs_get_srcport(transport);
+	int port = xs_get_srcport(transport);
 	unsigned short last;
 
 	/*
@@ -1839,8 +1845,8 @@ static int xs_bind(struct sock_xprt *transport, struct socket *sock)
 	 * transport->xprt.resvport == 1) xs_get_srcport above will
 	 * ensure that port is non-zero and we will bind as needed.
 	 */
-	if (port == 0)
-		return 0;
+	if (port <= 0)
+		return port;
 
 	memcpy(&myaddr, &transport->srcaddr, transport->xprt.addrlen);
 	do {
@@ -3223,12 +3229,8 @@ static int param_set_uint_minmax(const char *val,
 
 static int param_set_portnr(const char *val, const struct kernel_param *kp)
 {
-	if (kp->arg == &xprt_min_resvport)
-		return param_set_uint_minmax(val, kp,
-			RPC_MIN_RESVPORT,
-			xprt_max_resvport);
 	return param_set_uint_minmax(val, kp,
-			xprt_min_resvport,
+			RPC_MIN_RESVPORT,
 			RPC_MAX_RESVPORT);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 35/99] atm: zatm: Fix empty body Clang warnings

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 64b9d16e2d02ca6e5dc8fcd30cfd52b0ecaaa8f4 ]

Clang warns:

drivers/atm/zatm.c:513:7: error: while loop has empty body
[-Werror,-Wempty-body]
        zwait;
             ^
drivers/atm/zatm.c:513:7: note: put the semicolon on a separate line to
silence this warning

Get rid of this warning by using an empty do-while loop. While we're at
it, add parentheses to make it clear that this is a function-like macro.

Link: https://github.com/ClangBuiltLinux/linux/issues/42
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/zatm.c | 42 +++++++++++++++++++++---------------------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c
index a0b88f1489905..e23e2672a1d6b 100644
--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -126,7 +126,7 @@ static unsigned long dummy[2] = {0,0};
 #define zin_n(r) inl(zatm_dev->base+r*4)
 #define zin(r) inl(zatm_dev->base+uPD98401_##r*4)
 #define zout(v,r) outl(v,zatm_dev->base+uPD98401_##r*4)
-#define zwait while (zin(CMR) & uPD98401_BUSY)
+#define zwait() do {} while (zin(CMR) & uPD98401_BUSY)
 
 /* RX0, RX1, TX0, TX1 */
 static const int mbx_entries[NR_MBX] = { 1024,1024,1024,1024 };
@@ -140,7 +140,7 @@ static const int mbx_esize[NR_MBX] = { 16,16,4,4 }; /* entry size in bytes */
 
 static void zpokel(struct zatm_dev *zatm_dev,u32 value,u32 addr)
 {
-	zwait;
+	zwait();
 	zout(value,CER);
 	zout(uPD98401_IND_ACC | uPD98401_IA_BALL |
 	    (uPD98401_IA_TGT_CM << uPD98401_IA_TGT_SHIFT) | addr,CMR);
@@ -149,10 +149,10 @@ static void zpokel(struct zatm_dev *zatm_dev,u32 value,u32 addr)
 
 static u32 zpeekl(struct zatm_dev *zatm_dev,u32 addr)
 {
-	zwait;
+	zwait();
 	zout(uPD98401_IND_ACC | uPD98401_IA_BALL | uPD98401_IA_RW |
 	  (uPD98401_IA_TGT_CM << uPD98401_IA_TGT_SHIFT) | addr,CMR);
-	zwait;
+	zwait();
 	return zin(CER);
 }
 
@@ -241,7 +241,7 @@ static void refill_pool(struct atm_dev *dev,int pool)
 	}
 	if (first) {
 		spin_lock_irqsave(&zatm_dev->lock, flags);
-		zwait;
+		zwait();
 		zout(virt_to_bus(first),CER);
 		zout(uPD98401_ADD_BAT | (pool << uPD98401_POOL_SHIFT) | count,
 		    CMR);
@@ -508,9 +508,9 @@ static int open_rx_first(struct atm_vcc *vcc)
 	}
 	if (zatm_vcc->pool < 0) return -EMSGSIZE;
 	spin_lock_irqsave(&zatm_dev->lock, flags);
-	zwait;
+	zwait();
 	zout(uPD98401_OPEN_CHAN,CMR);
-	zwait;
+	zwait();
 	DPRINTK("0x%x 0x%x\n",zin(CMR),zin(CER));
 	chan = (zin(CMR) & uPD98401_CHAN_ADDR) >> uPD98401_CHAN_ADDR_SHIFT;
 	spin_unlock_irqrestore(&zatm_dev->lock, flags);
@@ -571,21 +571,21 @@ static void close_rx(struct atm_vcc *vcc)
 		pos = vcc->vci >> 1;
 		shift = (1-(vcc->vci & 1)) << 4;
 		zpokel(zatm_dev,zpeekl(zatm_dev,pos) & ~(0xffff << shift),pos);
-		zwait;
+		zwait();
 		zout(uPD98401_NOP,CMR);
-		zwait;
+		zwait();
 		zout(uPD98401_NOP,CMR);
 		spin_unlock_irqrestore(&zatm_dev->lock, flags);
 	}
 	spin_lock_irqsave(&zatm_dev->lock, flags);
-	zwait;
+	zwait();
 	zout(uPD98401_DEACT_CHAN | uPD98401_CHAN_RT | (zatm_vcc->rx_chan <<
 	    uPD98401_CHAN_ADDR_SHIFT),CMR);
-	zwait;
+	zwait();
 	udelay(10); /* why oh why ... ? */
 	zout(uPD98401_CLOSE_CHAN | uPD98401_CHAN_RT | (zatm_vcc->rx_chan <<
 	    uPD98401_CHAN_ADDR_SHIFT),CMR);
-	zwait;
+	zwait();
 	if (!(zin(CMR) & uPD98401_CHAN_ADDR))
 		printk(KERN_CRIT DEV_LABEL "(itf %d): can't close RX channel "
 		    "%d\n",vcc->dev->number,zatm_vcc->rx_chan);
@@ -699,7 +699,7 @@ printk("NONONONOO!!!!\n");
 	skb_queue_tail(&zatm_vcc->tx_queue,skb);
 	DPRINTK("QRP=0x%08lx\n",zpeekl(zatm_dev,zatm_vcc->tx_chan*VC_SIZE/4+
 	  uPD98401_TXVC_QRP));
-	zwait;
+	zwait();
 	zout(uPD98401_TX_READY | (zatm_vcc->tx_chan <<
 	    uPD98401_CHAN_ADDR_SHIFT),CMR);
 	spin_unlock_irqrestore(&zatm_dev->lock, flags);
@@ -891,12 +891,12 @@ static void close_tx(struct atm_vcc *vcc)
 	}
 	spin_lock_irqsave(&zatm_dev->lock, flags);
 #if 0
-	zwait;
+	zwait();
 	zout(uPD98401_DEACT_CHAN | (chan << uPD98401_CHAN_ADDR_SHIFT),CMR);
 #endif
-	zwait;
+	zwait();
 	zout(uPD98401_CLOSE_CHAN | (chan << uPD98401_CHAN_ADDR_SHIFT),CMR);
-	zwait;
+	zwait();
 	if (!(zin(CMR) & uPD98401_CHAN_ADDR))
 		printk(KERN_CRIT DEV_LABEL "(itf %d): can't close TX channel "
 		    "%d\n",vcc->dev->number,chan);
@@ -926,9 +926,9 @@ static int open_tx_first(struct atm_vcc *vcc)
 	zatm_vcc->tx_chan = 0;
 	if (vcc->qos.txtp.traffic_class == ATM_NONE) return 0;
 	spin_lock_irqsave(&zatm_dev->lock, flags);
-	zwait;
+	zwait();
 	zout(uPD98401_OPEN_CHAN,CMR);
-	zwait;
+	zwait();
 	DPRINTK("0x%x 0x%x\n",zin(CMR),zin(CER));
 	chan = (zin(CMR) & uPD98401_CHAN_ADDR) >> uPD98401_CHAN_ADDR_SHIFT;
 	spin_unlock_irqrestore(&zatm_dev->lock, flags);
@@ -1559,7 +1559,7 @@ static void zatm_phy_put(struct atm_dev *dev,unsigned char value,
 	struct zatm_dev *zatm_dev;
 
 	zatm_dev = ZATM_DEV(dev);
-	zwait;
+	zwait();
 	zout(value,CER);
 	zout(uPD98401_IND_ACC | uPD98401_IA_B0 |
 	    (uPD98401_IA_TGT_PHY << uPD98401_IA_TGT_SHIFT) | addr,CMR);
@@ -1571,10 +1571,10 @@ static unsigned char zatm_phy_get(struct atm_dev *dev,unsigned long addr)
 	struct zatm_dev *zatm_dev;
 
 	zatm_dev = ZATM_DEV(dev);
-	zwait;
+	zwait();
 	zout(uPD98401_IND_ACC | uPD98401_IA_B0 | uPD98401_IA_RW |
 	  (uPD98401_IA_TGT_PHY << uPD98401_IA_TGT_SHIFT) | addr,CMR);
-	zwait;
+	zwait();
 	return zin(CER) & 0xff;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 36/99] s390/perf: Return error when debug_register fails

[Sasha Levin]

From: Thomas Richter <tmricht@linux.ibm.com>

[ Upstream commit ec0c0bb489727de0d4dca6a00be6970ab8a3b30a ]

Return an error when the function debug_register() fails allocating
the debug handle.
Also remove the registered debug handle when the initialization fails
later on.

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/perf_cpum_sf.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index 96e4fcad57bf7..f46e5c0cb6d95 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -1611,14 +1611,17 @@ static int __init init_cpum_sampling_pmu(void)
 	}
 
 	sfdbg = debug_register(KMSG_COMPONENT, 2, 1, 80);
-	if (!sfdbg)
+	if (!sfdbg) {
 		pr_err("Registering for s390dbf failed\n");
+		return -ENOMEM;
+	}
 	debug_register_view(sfdbg, &debug_sprintf_view);
 
 	err = register_external_irq(EXT_IRQ_MEASURE_ALERT,
 				    cpumf_measurement_alert);
 	if (err) {
 		pr_cpumsf_err(RS_INIT_FAILURE_ALRT);
+		debug_unregister(sfdbg);
 		goto out;
 	}
 
@@ -1627,6 +1630,7 @@ static int __init init_cpum_sampling_pmu(void)
 		pr_cpumsf_err(RS_INIT_FAILURE_PERF);
 		unregister_external_irq(EXT_IRQ_MEASURE_ALERT,
 					cpumf_measurement_alert);
+		debug_unregister(sfdbg);
 		goto out;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 37/99] spi: omap2-mcspi: Set FIFO DMA trigger level to word length

[Sasha Levin]

From: Vignesh R <vigneshr@ti.com>

[ Upstream commit b682cffa3ac6d9d9e16e9b413c45caee3b391fab ]

McSPI has 32 byte FIFO in Transmit-Receive mode. Current code tries to
configuration FIFO watermark level for DMA trigger to be GCD of transfer
length and max FIFO size which would mean trigger level may be set to 32
for transmit-receive mode if length is aligned. This does not work in
case of SPI slave mode where FIFO always needs to have data ready
whenever master starts the clock. With DMA trigger size of 32 there will
be a small window during slave TX where DMA is still putting data into
FIFO but master would have started clock for next byte, resulting in
shifting out of stale data. Similarly, on Slave RX side there may be RX
FIFO overflow
Fix this by setting FIFO watermark for DMA trigger to word
length. This means DMA is triggered as soon as FIFO has space for word
length bytes and DMA would make sure FIFO is almost always full
therefore improving FIFO occupancy in both master and slave mode.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-omap2-mcspi.c | 26 +++++++-------------------
 1 file changed, 7 insertions(+), 19 deletions(-)

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index a47cf638460a6..bc136fe3a2829 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -298,7 +298,7 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
 	struct omap2_mcspi_cs *cs = spi->controller_state;
 	struct omap2_mcspi *mcspi;
 	unsigned int wcnt;
-	int max_fifo_depth, fifo_depth, bytes_per_word;
+	int max_fifo_depth, bytes_per_word;
 	u32 chconf, xferlevel;
 
 	mcspi = spi_master_get_devdata(master);
@@ -314,10 +314,6 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
 		else
 			max_fifo_depth = OMAP2_MCSPI_MAX_FIFODEPTH;
 
-		fifo_depth = gcd(t->len, max_fifo_depth);
-		if (fifo_depth < 2 || fifo_depth % bytes_per_word != 0)
-			goto disable_fifo;
-
 		wcnt = t->len / bytes_per_word;
 		if (wcnt > OMAP2_MCSPI_MAX_FIFOWCNT)
 			goto disable_fifo;
@@ -325,16 +321,17 @@ static void omap2_mcspi_set_fifo(const struct spi_device *spi,
 		xferlevel = wcnt << 16;
 		if (t->rx_buf != NULL) {
 			chconf |= OMAP2_MCSPI_CHCONF_FFER;
-			xferlevel |= (fifo_depth - 1) << 8;
+			xferlevel |= (bytes_per_word - 1) << 8;
 		}
+
 		if (t->tx_buf != NULL) {
 			chconf |= OMAP2_MCSPI_CHCONF_FFET;
-			xferlevel |= fifo_depth - 1;
+			xferlevel |= bytes_per_word - 1;
 		}
 
 		mcspi_write_reg(master, OMAP2_MCSPI_XFERLEVEL, xferlevel);
 		mcspi_write_chconf0(spi, chconf);
-		mcspi->fifo_depth = fifo_depth;
+		mcspi->fifo_depth = max_fifo_depth;
 
 		return;
 	}
@@ -601,7 +598,6 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
 	struct dma_slave_config	cfg;
 	enum dma_slave_buswidth width;
 	unsigned es;
-	u32			burst;
 	void __iomem		*chstat_reg;
 	void __iomem            *irqstat_reg;
 	int			wait_res;
@@ -623,22 +619,14 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
 	}
 
 	count = xfer->len;
-	burst = 1;
-
-	if (mcspi->fifo_depth > 0) {
-		if (count > mcspi->fifo_depth)
-			burst = mcspi->fifo_depth / es;
-		else
-			burst = count / es;
-	}
 
 	memset(&cfg, 0, sizeof(cfg));
 	cfg.src_addr = cs->phys + OMAP2_MCSPI_RX0;
 	cfg.dst_addr = cs->phys + OMAP2_MCSPI_TX0;
 	cfg.src_addr_width = width;
 	cfg.dst_addr_width = width;
-	cfg.src_maxburst = burst;
-	cfg.dst_maxburst = burst;
+	cfg.src_maxburst = es;
+	cfg.dst_maxburst = es;
 
 	rx = xfer->rx_buf;
 	tx = xfer->tx_buf;
-- 
2.20.1

[PATCH AUTOSEL 4.9 38/99] sparc: Fix parport build warnings.

[Sasha Levin]

From: "David S. Miller" <davem@davemloft.net>

[ Upstream commit 46b8306480fb424abd525acc1763da1c63a27d8a ]

If PARPORT_PC_FIFO is not enabled, do not provide the dma lock
macros and lock definition.  Otherwise:

./arch/sparc/include/asm/parport.h:24:24: warning: ‘dma_spin_lock’ defined but not used [-Wunused-variable]
 static DEFINE_SPINLOCK(dma_spin_lock);
                        ^~~~~~~~~~~~~
./include/linux/spinlock_types.h:81:39: note: in definition of macro ‘DEFINE_SPINLOCK’
 #define DEFINE_SPINLOCK(x) spinlock_t x = __SPIN_LOCK_UNLOCKED(x)

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/include/asm/parport.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/sparc/include/asm/parport.h b/arch/sparc/include/asm/parport.h
index f005ccac91cc9..e87c0f81b700e 100644
--- a/arch/sparc/include/asm/parport.h
+++ b/arch/sparc/include/asm/parport.h
@@ -20,6 +20,7 @@
  */
 #define HAS_DMA
 
+#ifdef CONFIG_PARPORT_PC_FIFO
 static DEFINE_SPINLOCK(dma_spin_lock);
 
 #define claim_dma_lock() \
@@ -30,6 +31,7 @@ static DEFINE_SPINLOCK(dma_spin_lock);
 
 #define release_dma_lock(__flags) \
 	spin_unlock_irqrestore(&dma_spin_lock, __flags);
+#endif
 
 static struct sparc_ebus_info {
 	struct ebus_dma_info info;
-- 
2.20.1

[PATCH AUTOSEL 4.9 39/99] ceph: fix dentry leak in ceph_readdir_prepopulate

[Sasha Levin]

From: "Yan, Zheng" <zyan@redhat.com>

[ Upstream commit c58f450bd61511d897efc2ea472c69630635b557 ]

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ceph/inode.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 7fcddaaca8a5d..049cff197d2a1 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -1630,7 +1630,6 @@ int ceph_readdir_prepopulate(struct ceph_mds_request *req,
 			if (IS_ERR(realdn)) {
 				err = PTR_ERR(realdn);
 				d_drop(dn);
-				dn = NULL;
 				goto next_item;
 			}
 			dn = realdn;
-- 
2.20.1

[PATCH AUTOSEL 4.9 40/99] rtc: s35390a: Change buf's type to u8 in s35390a_init

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit ef0f02fd69a02b50e468a4ddbe33e3d81671e248 ]

Clang warns:

drivers/rtc/rtc-s35390a.c:124:27: warning: implicit conversion from
'int' to 'char' changes value from 192 to -64 [-Wconstant-conversion]
        buf = S35390A_FLAG_RESET | S35390A_FLAG_24H;
            ~ ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~
1 warning generated.

Update buf to be an unsigned 8-bit integer, which matches the buf member
in struct i2c_msg.

https://github.com/ClangBuiltLinux/linux/issues/145
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-s35390a.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-s35390a.c b/drivers/rtc/rtc-s35390a.c
index 5dab4665ca3bd..3e0eea3aa876d 100644
--- a/drivers/rtc/rtc-s35390a.c
+++ b/drivers/rtc/rtc-s35390a.c
@@ -106,7 +106,7 @@ static int s35390a_get_reg(struct s35390a *s35390a, int reg, char *buf, int len)
  */
 static int s35390a_reset(struct s35390a *s35390a, char *status1)
 {
-	char buf;
+	u8 buf;
 	int ret;
 	unsigned initcount = 0;
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 41/99] f2fs: fix to spread clear_cold_data()

[Sasha Levin]

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit 2baf07818549c8bb8d7b3437e889b86eab56d38e ]

We need to drop PG_checked flag on page as well when we clear PG_uptodate
flag, in order to avoid treating the page as GCing one later.

Signed-off-by: Weichao Guo <guoweichao@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/data.c    | 8 +++++++-
 fs/f2fs/dir.c     | 1 +
 fs/f2fs/segment.c | 4 +++-
 3 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index 9041805096e0c..0206c8c20784c 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -1201,6 +1201,7 @@ int do_write_data_page(struct f2fs_io_info *fio)
 	/* This page is already truncated */
 	if (fio->old_blkaddr == NULL_ADDR) {
 		ClearPageUptodate(page);
+		clear_cold_data(page);
 		goto out_writepage;
 	}
 
@@ -1337,8 +1338,10 @@ static int f2fs_write_data_page(struct page *page,
 	clear_cold_data(page);
 out:
 	inode_dec_dirty_pages(inode);
-	if (err)
+	if (err) {
 		ClearPageUptodate(page);
+		clear_cold_data(page);
+	}
 
 	if (wbc->for_reclaim) {
 		f2fs_submit_merged_bio_cond(sbi, NULL, page, 0, DATA, WRITE);
@@ -1821,6 +1824,8 @@ void f2fs_invalidate_page(struct page *page, unsigned int offset,
 			inode_dec_dirty_pages(inode);
 	}
 
+	clear_cold_data(page);
+
 	/* This is atomic written page, keep Private */
 	if (IS_ATOMIC_WRITTEN_PAGE(page))
 		return;
@@ -1839,6 +1844,7 @@ int f2fs_release_page(struct page *page, gfp_t wait)
 	if (IS_ATOMIC_WRITTEN_PAGE(page))
 		return 0;
 
+	clear_cold_data(page);
 	set_page_private(page, 0);
 	ClearPagePrivate(page);
 	return 1;
diff --git a/fs/f2fs/dir.c b/fs/f2fs/dir.c
index af719d93507e8..b414892be08b7 100644
--- a/fs/f2fs/dir.c
+++ b/fs/f2fs/dir.c
@@ -772,6 +772,7 @@ void f2fs_delete_entry(struct f2fs_dir_entry *dentry, struct page *page,
 		clear_page_dirty_for_io(page);
 		ClearPagePrivate(page);
 		ClearPageUptodate(page);
+		clear_cold_data(page);
 		inode_dec_dirty_pages(dir);
 	}
 	f2fs_put_page(page, 1);
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index 1d5a352138109..c4c84af1ec17a 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -227,8 +227,10 @@ static int __revoke_inmem_pages(struct inode *inode,
 		}
 next:
 		/* we don't need to invalidate this in the sccessful status */
-		if (drop || recover)
+		if (drop || recover) {
 			ClearPageUptodate(page);
+			clear_cold_data(page);
+		}
 		set_page_private(page, 0);
 		ClearPagePrivate(page);
 		f2fs_put_page(page, 1);
-- 
2.20.1

[PATCH AUTOSEL 4.9 42/99] mISDN: Fix type of switch control variable in ctrl_teimanager

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit aeb5e02aca91522733eb1db595ac607d30c87767 ]

Clang warns (trimmed for brevity):

drivers/isdn/mISDN/tei.c:1193:7: warning: overflow converting case value
to switch condition type (2147764552 to 18446744071562348872) [-Wswitch]
        case IMHOLD_L1:
             ^
drivers/isdn/mISDN/tei.c:1187:7: warning: overflow converting case value
to switch condition type (2147764550 to 18446744071562348870) [-Wswitch]
        case IMCLEAR_L2:
             ^
2 warnings generated.

The root cause is that the _IOC macro can generate really large numbers,
which don't find into type int. My research into how GCC and Clang are
handling this at a low level didn't prove fruitful and surveying the
kernel tree shows that aside from here and a few places in the scsi
subsystem, everything that uses _IOC is at least of type 'unsigned int'.
Make that change here because as nothing in this function cares about
the signedness of the variable and it removes ambiguity, which is never
good when dealing with compilers.

While we're here, remove the unnecessary local variable ret (just return
-EINVAL and 0 directly).

Link: https://github.com/ClangBuiltLinux/linux/issues/67
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/mISDN/tei.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/isdn/mISDN/tei.c b/drivers/isdn/mISDN/tei.c
index 592f597d89518..8261afbbafb05 100644
--- a/drivers/isdn/mISDN/tei.c
+++ b/drivers/isdn/mISDN/tei.c
@@ -1180,8 +1180,7 @@ static int
 ctrl_teimanager(struct manager *mgr, void *arg)
 {
 	/* currently we only have one option */
-	int	*val = (int *)arg;
-	int	ret = 0;
+	unsigned int *val = (unsigned int *)arg;
 
 	switch (val[0]) {
 	case IMCLEAR_L2:
@@ -1197,9 +1196,9 @@ ctrl_teimanager(struct manager *mgr, void *arg)
 			test_and_clear_bit(OPTION_L1_HOLD, &mgr->options);
 		break;
 	default:
-		ret = -EINVAL;
+		return -EINVAL;
 	}
-	return ret;
+	return 0;
 }
 
 /* This function does create a L2 for fixed TEI in NT Mode */
-- 
2.20.1

[PATCH AUTOSEL 4.9 43/99] qlcnic: fix a return in qlcnic_dcb_get_capability()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit c94f026fb742b2d3199422751dbc4f6fc0e753d8 ]

These functions are supposed to return one on failure and zero on
success.  Returning a zero here could cause uninitialized variable
bugs in several of the callers.  For example:

    drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:1660 get_iscsi_dcb_priority()
    error: uninitialized symbol 'caps'.

Fixes: 48365e485275 ("qlcnic: dcb: Add support for CEE Netlink interface.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c
index 4b76c69fe86d2..834208e55f7b8 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c
@@ -883,7 +883,7 @@ static u8 qlcnic_dcb_get_capability(struct net_device *netdev, int capid,
 	struct qlcnic_adapter *adapter = netdev_priv(netdev);
 
 	if (!test_bit(QLCNIC_DCB_STATE, &adapter->dcb->state))
-		return 0;
+		return 1;
 
 	switch (capid) {
 	case DCB_CAP_ATTR_PG:
-- 
2.20.1

[PATCH AUTOSEL 4.9 44/99] net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode

[Sasha Levin]

From: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>

[ Upstream commit 9737cc99dd14b5b8b9d267618a6061feade8ea68 ]

After flushing all mcast entries from the table, the ones contained in
mc list of ndev are not restored when promisc mode is toggled off,
because they are considered as synched with ALE, thus, in order to
restore them after promisc mode - reset syncing info. This fix
touches only switch mode devices, including single port boards
like Beagle Bone.

Fixes: commit 5da1948969bc
("net: ethernet: ti: cpsw: fix lost of mcast packets while rx_mode update")

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ti/cpsw.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index d7cb205fe7e26..892b06852e150 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -590,6 +590,7 @@ static void cpsw_set_promiscious(struct net_device *ndev, bool enable)
 
 			/* Clear all mcast from ALE */
 			cpsw_ale_flush_multicast(ale, ALE_ALL_PORTS, -1);
+			__dev_mc_unsync(ndev, NULL);
 
 			/* Flood All Unicast Packets to Host port */
 			cpsw_ale_control_set(ale, 0, ALE_P0_UNI_FLOOD, 1);
-- 
2.20.1

[PATCH AUTOSEL 4.9 45/99] mfd: arizona: Correct calling of runtime_put_sync

[Sasha Levin]

From: Sapthagiri Baratam <sapthagiri.baratam@cirrus.com>

[ Upstream commit 6b269a41a4520f7eb639e61a45ebbb9c9267d5e0 ]

Don't call runtime_put_sync when clk32k_ref is ARIZONA_32KZ_MCLK2
as there is no corresponding runtime_get_sync call.

MCLK1 is not in the AoD power domain so if it is used as 32kHz clock
source we need to hold a runtime PM reference to keep the device from
going into low power mode.

Fixes: cdd8da8cc66b ("mfd: arizona: Add gating of external MCLKn clocks")
Signed-off-by: Sapthagiri Baratam <sapthagiri.baratam@cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/arizona-core.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 0556a9749dbe0..1f0c2b594654e 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -52,8 +52,10 @@ int arizona_clk32k_enable(struct arizona *arizona)
 			if (ret != 0)
 				goto err_ref;
 			ret = clk_prepare_enable(arizona->mclk[ARIZONA_MCLK1]);
-			if (ret != 0)
-				goto err_pm;
+			if (ret != 0) {
+				pm_runtime_put_sync(arizona->dev);
+				goto err_ref;
+			}
 			break;
 		case ARIZONA_32KZ_MCLK2:
 			ret = clk_prepare_enable(arizona->mclk[ARIZONA_MCLK2]);
@@ -67,8 +69,6 @@ int arizona_clk32k_enable(struct arizona *arizona)
 					 ARIZONA_CLK_32K_ENA);
 	}
 
-err_pm:
-	pm_runtime_put_sync(arizona->dev);
 err_ref:
 	if (ret != 0)
 		arizona->clk32k_ref--;
-- 
2.20.1

[PATCH AUTOSEL 4.9 46/99] mfd: mc13xxx-core: Fix PMIC shutdown when reading ADC values

[Sasha Levin]

From: Fabio Estevam <fabio.estevam@nxp.com>

[ Upstream commit 55143439b7b501882bea9d95a54adfe00ffc79a3 ]

When trying to read any MC13892 ADC channel on a imx51-babbage board:

The MC13892 PMIC shutdowns completely.

After debugging this issue and comparing the MC13892 and MC13783
initializations done in the vendor kernel, it was noticed that the
CHRGRAWDIV bit of the ADC0 register was not being set.

This bit is set by default after power on, but the driver was
clearing it.

After setting this bit it is possible to read the ADC values correctly.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/mc13xxx-core.c  | 3 ++-
 include/linux/mfd/mc13xxx.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c
index 6c16f170529f5..75d52034f89da 100644
--- a/drivers/mfd/mc13xxx-core.c
+++ b/drivers/mfd/mc13xxx-core.c
@@ -278,7 +278,8 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
 	if (ret)
 		goto out;
 
-	adc0 = MC13XXX_ADC0_ADINC1 | MC13XXX_ADC0_ADINC2;
+	adc0 = MC13XXX_ADC0_ADINC1 | MC13XXX_ADC0_ADINC2 |
+	       MC13XXX_ADC0_CHRGRAWDIV;
 	adc1 = MC13XXX_ADC1_ADEN | MC13XXX_ADC1_ADTRIGIGN | MC13XXX_ADC1_ASC;
 
 	if (channel > 7)
diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h
index 638222e43e489..93011c61aafd2 100644
--- a/include/linux/mfd/mc13xxx.h
+++ b/include/linux/mfd/mc13xxx.h
@@ -247,6 +247,7 @@ struct mc13xxx_platform_data {
 #define MC13XXX_ADC0_TSMOD0		(1 << 12)
 #define MC13XXX_ADC0_TSMOD1		(1 << 13)
 #define MC13XXX_ADC0_TSMOD2		(1 << 14)
+#define MC13XXX_ADC0_CHRGRAWDIV		(1 << 15)
 #define MC13XXX_ADC0_ADINC1		(1 << 16)
 #define MC13XXX_ADC0_ADINC2		(1 << 17)
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 47/99] mfd: max8997: Enale irq-wakeup unconditionally

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit efddff27c886e729a7f84a7205bd84d7d4af7336 ]

IRQ wake up support for MAX8997 driver was initially configured by
respective property in pdata. However, after the driver conversion to
device-tree, setting it was left as 'todo'. Nowadays most of other PMIC MFD
drivers initialized from device-tree assume that they can be an irq wakeup
source, so enable it also for MAX8997. This fixes support for wakeup from
MAX8997 RTC alarm.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mfd/max8997.c       | 8 +-------
 include/linux/mfd/max8997.h | 1 -
 2 files changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
index 2d6e2c3927862..4a2fc59d59016 100644
--- a/drivers/mfd/max8997.c
+++ b/drivers/mfd/max8997.c
@@ -155,12 +155,6 @@ static struct max8997_platform_data *max8997_i2c_parse_dt_pdata(
 
 	pd->ono = irq_of_parse_and_map(dev->of_node, 1);
 
-	/*
-	 * ToDo: the 'wakeup' member in the platform data is more of a linux
-	 * specfic information. Hence, there is no binding for that yet and
-	 * not parsed here.
-	 */
-
 	return pd;
 }
 
@@ -248,7 +242,7 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
 	 */
 
 	/* MAX8997 has a power button input. */
-	device_init_wakeup(max8997->dev, pdata->wakeup);
+	device_init_wakeup(max8997->dev, true);
 
 	return ret;
 
diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h
index cf815577bd686..3ae1fe743bc34 100644
--- a/include/linux/mfd/max8997.h
+++ b/include/linux/mfd/max8997.h
@@ -178,7 +178,6 @@ struct max8997_led_platform_data {
 struct max8997_platform_data {
 	/* IRQ */
 	int ono;
-	int wakeup;
 
 	/* ---- PMIC ---- */
 	struct max8997_regulator_data *regulators;
-- 
2.20.1

[PATCH AUTOSEL 4.9 48/99] selftests/ftrace: Fix to test kprobe $comm arg only if available

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit 2452c96e617a0ff6fb2692e55217a3fa57a7322c ]

Test $comm in kprobe-event argument syntax testcase
only if it is supported on the kernel because
$comm has been introduced 4.8 kernel.
So on older stable kernel, it should be skipped.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc       | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc
index 231bcd2c4eb59..1e7ac6f3362ff 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_syntax.tc
@@ -71,8 +71,11 @@ test_badarg "\$stackp" "\$stack0+10" "\$stack1-10"
 echo "r ${PROBEFUNC} \$retval" > kprobe_events
 ! echo "p ${PROBEFUNC} \$retval" > kprobe_events
 
+# $comm was introduced in 4.8, older kernels reject it.
+if grep -A1 "fetcharg:" README | grep -q '\$comm' ; then
 : "Comm access"
 test_goodarg "\$comm"
+fi
 
 : "Indirect memory access"
 test_goodarg "+0(${GOODREG})" "-0(${GOODREG})" "+10(\$stack)" \
-- 
2.20.1

[PATCH AUTOSEL 4.9 49/99] thermal: rcar_thermal: Prevent hardware access during system suspend

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 3a31386217628ffe2491695be2db933c25dde785 ]

On r8a7791/koelsch, sometimes the following message is printed during
system suspend:

    rcar_thermal e61f0000.thermal: thermal sensor was broken

This happens if the workqueue runs while the device is already
suspended.  Fix this by using the freezable system workqueue instead,
cfr. commit 51e20d0e3a60cf46 ("thermal: Prevent polling from happening
during system suspend").

Fixes: e0a5172e9eec7f0d ("thermal: rcar: add interrupt support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thermal/rcar_thermal.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 73e5fee6cf1d5..83126e2dce36d 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -401,8 +401,8 @@ static irqreturn_t rcar_thermal_irq(int irq, void *data)
 	rcar_thermal_for_each_priv(priv, common) {
 		if (rcar_thermal_had_changed(priv, status)) {
 			rcar_thermal_irq_disable(priv);
-			schedule_delayed_work(&priv->work,
-					      msecs_to_jiffies(300));
+			queue_delayed_work(system_freezable_wq, &priv->work,
+					   msecs_to_jiffies(300));
 		}
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 50/99] powerpc/process: Fix flush_all_to_thread for SPE

[Sasha Levin]

From: Felipe Rechia <felipe.rechia@datacom.com.br>

[ Upstream commit e901378578c62202594cba0f6c076f3df365ec91 ]

Fix a bug introduced by the creation of flush_all_to_thread() for
processors that have SPE (Signal Processing Engine) and use it to
compute floating-point operations.

>From userspace perspective, the problem was seen in attempts of
computing floating-point operations which should generate exceptions.
For example:

  fork();
  float x = 0.0 / 0.0;
  isnan(x);           // forked process returns False (should be True)

The operation above also should always cause the SPEFSCR FINV bit to
be set. However, the SPE floating-point exceptions were turned off
after a fork().

Kernel versions prior to the bug used flush_spe_to_thread(), which
first saves SPEFSCR register values in tsk->thread and then calls
giveup_spe(tsk).

After commit 579e633e764e, the save_all() function was called first
to giveup_spe(), and then the SPEFSCR register values were saved in
tsk->thread. This would save the SPEFSCR register values after
disabling SPE for that thread, causing the bug described above.

Fixes 579e633e764e ("powerpc: create flush_all_to_thread()")
Signed-off-by: Felipe Rechia <felipe.rechia@datacom.com.br>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/process.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 47c6c0401b3a2..54c95e7c74cce 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -576,12 +576,11 @@ void flush_all_to_thread(struct task_struct *tsk)
 	if (tsk->thread.regs) {
 		preempt_disable();
 		BUG_ON(tsk != current);
-		save_all(tsk);
-
 #ifdef CONFIG_SPE
 		if (tsk->thread.regs->msr & MSR_SPE)
 			tsk->thread.spefscr = mfspr(SPRN_SPEFSCR);
 #endif
+		save_all(tsk);
 
 		preempt_enable();
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.9 51/99] sparc64: Rework xchg() definition to avoid warnings.

[Sasha Levin]

From: "David S. Miller" <davem@davemloft.net>

[ Upstream commit 6c2fc9cddc1ffdef8ada1dc8404e5affae849953 ]

Such as:

fs/ocfs2/file.c: In function ‘ocfs2_file_write_iter’:
./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value]
 #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))

and

drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function ‘ixgbevf_xdp_setup’:
./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value]
 #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/include/asm/cmpxchg_64.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/sparc/include/asm/cmpxchg_64.h b/arch/sparc/include/asm/cmpxchg_64.h
index faa2f61058c27..92f0a46ace78e 100644
--- a/arch/sparc/include/asm/cmpxchg_64.h
+++ b/arch/sparc/include/asm/cmpxchg_64.h
@@ -40,7 +40,12 @@ static inline unsigned long xchg64(__volatile__ unsigned long *m, unsigned long
 	return val;
 }
 
-#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+#define xchg(ptr,x)							\
+({	__typeof__(*(ptr)) __ret;					\
+	__ret = (__typeof__(*(ptr)))					\
+		__xchg((unsigned long)(x), (ptr), sizeof(*(ptr)));	\
+	__ret;								\
+})
 
 void __xchg_called_with_bad_pointer(void);
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 52/99] fs/ocfs2/dlm/dlmdebug.c: fix a sleep-in-atomic-context bug in dlm_print_one_mle()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit 999865764f5f128896402572b439269acb471022 ]

The kernel module may sleep with holding a spinlock.

The function call paths (from bottom to top) in Linux-4.16 are:

[FUNC] get_zeroed_page(GFP_NOFS)
fs/ocfs2/dlm/dlmdebug.c, 332: get_zeroed_page in dlm_print_one_mle
fs/ocfs2/dlm/dlmmaster.c, 240: dlm_print_one_mle in __dlm_put_mle
fs/ocfs2/dlm/dlmmaster.c, 255: __dlm_put_mle in dlm_put_mle
fs/ocfs2/dlm/dlmmaster.c, 254: spin_lock in dlm_put_ml

[FUNC] get_zeroed_page(GFP_NOFS)
fs/ocfs2/dlm/dlmdebug.c, 332: get_zeroed_page in dlm_print_one_mle
fs/ocfs2/dlm/dlmmaster.c, 240: dlm_print_one_mle in __dlm_put_mle
fs/ocfs2/dlm/dlmmaster.c, 222: __dlm_put_mle in dlm_put_mle_inuse
fs/ocfs2/dlm/dlmmaster.c, 219: spin_lock in dlm_put_mle_inuse

To fix this bug, GFP_NOFS is replaced with GFP_ATOMIC.

This bug is found by my static analysis tool DSAC.

Link: http://lkml.kernel.org/r/20180901112528.27025-1-baijiaju1990@gmail.com
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ocfs2/dlm/dlmdebug.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ocfs2/dlm/dlmdebug.c b/fs/ocfs2/dlm/dlmdebug.c
index e7b760deefaee..32d60f69db24c 100644
--- a/fs/ocfs2/dlm/dlmdebug.c
+++ b/fs/ocfs2/dlm/dlmdebug.c
@@ -329,7 +329,7 @@ void dlm_print_one_mle(struct dlm_master_list_entry *mle)
 {
 	char *buf;
 
-	buf = (char *) get_zeroed_page(GFP_NOFS);
+	buf = (char *) get_zeroed_page(GFP_ATOMIC);
 	if (buf) {
 		dump_mle(mle, buf, PAGE_SIZE - 1);
 		free_page((unsigned long)buf);
-- 
2.20.1

[PATCH AUTOSEL 4.9 53/99] mm/page-writeback.c: fix range_cyclic writeback vs writepages deadlock

[Sasha Levin]

From: Dave Chinner <dchinner@redhat.com>

[ Upstream commit 64081362e8ff4587b4554087f3cfc73d3e0a4cd7 ]

We've recently seen a workload on XFS filesystems with a repeatable
deadlock between background writeback and a multi-process application
doing concurrent writes and fsyncs to a small range of a file.

range_cyclic
writeback		Process 1		Process 2

xfs_vm_writepages
  write_cache_pages
    writeback_index = 2
    cycled = 0
    ....
    find page 2 dirty
    lock Page 2
    ->writepage
      page 2 writeback
      page 2 clean
      page 2 added to bio
    no more pages
			write()
			locks page 1
			dirties page 1
			locks page 2
			dirties page 1
			fsync()
			....
			xfs_vm_writepages
			write_cache_pages
			  start index 0
			  find page 1 towrite
			  lock Page 1
			  ->writepage
			    page 1 writeback
			    page 1 clean
			    page 1 added to bio
			  find page 2 towrite
			  lock Page 2
			  page 2 is writeback
			  <blocks>
						write()
						locks page 1
						dirties page 1
						fsync()
						....
						xfs_vm_writepages
						write_cache_pages
						  start index 0

    !done && !cycled
      sets index to 0, restarts lookup
    find page 1 dirty
						  find page 1 towrite
						  lock Page 1
						  page 1 is writeback
						  <blocks>

    lock Page 1
    <blocks>

DEADLOCK because:

	- process 1 needs page 2 writeback to complete to make
	  enough progress to issue IO pending for page 1
	- writeback needs page 1 writeback to complete so process 2
	  can progress and unlock the page it is blocked on, then it
	  can issue the IO pending for page 2
	- process 2 can't make progress until process 1 issues IO
	  for page 1

The underlying cause of the problem here is that range_cyclic writeback is
processing pages in descending index order as we hold higher index pages
in a structure controlled from above write_cache_pages().  The
write_cache_pages() caller needs to be able to submit these pages for IO
before write_cache_pages restarts writeback at mapping index 0 to avoid
wcp inverting the page lock/writeback wait order.

generic_writepages() is not susceptible to this bug as it has no private
context held across write_cache_pages() - filesystems using this
infrastructure always submit pages in ->writepage immediately and so there
is no problem with range_cyclic going back to mapping index 0.

However:
	mpage_writepages() has a private bio context,
	exofs_writepages() has page_collect
	fuse_writepages() has fuse_fill_wb_data
	nfs_writepages() has nfs_pageio_descriptor
	xfs_vm_writepages() has xfs_writepage_ctx

All of these ->writepages implementations can hold pages under writeback
in their private structures until write_cache_pages() returns, and hence
they are all susceptible to this deadlock.

Also worth noting is that ext4 has it's own bastardised version of
write_cache_pages() and so it /may/ have an equivalent deadlock.  I looked
at the code long enough to understand that it has a similar retry loop for
range_cyclic writeback reaching the end of the file and then promptly ran
away before my eyes bled too much.  I'll leave it for the ext4 developers
to determine if their code is actually has this deadlock and how to fix it
if it has.

There's a few ways I can see avoid this deadlock.  There's probably more,
but these are the first I've though of:

1. get rid of range_cyclic altogether

2. range_cyclic always stops at EOF, and we start again from
writeback index 0 on the next call into write_cache_pages()

2a. wcp also returns EAGAIN to ->writepages implementations to
indicate range cyclic has hit EOF. writepages implementations can
then flush the current context and call wpc again to continue. i.e.
lift the retry into the ->writepages implementation

3. range_cyclic uses trylock_page() rather than lock_page(), and it
skips pages it can't lock without blocking. It will already do this
for pages under writeback, so this seems like a no-brainer

3a. all non-WB_SYNC_ALL writeback uses trylock_page() to avoid
blocking as per pages under writeback.

I don't think #1 is an option - range_cyclic prevents frequently
dirtied lower file offset from starving background writeback of
rarely touched higher file offsets.

#2 is simple, and I don't think it will have any impact on
performance as going back to the start of the file implies an
immediate seek. We'll have exactly the same number of seeks if we
switch writeback to another inode, and then come back to this one
later and restart from index 0.

#2a is pretty much "status quo without the deadlock". Moving the
retry loop up into the wcp caller means we can issue IO on the
pending pages before calling wcp again, and so avoid locking or
waiting on pages in the wrong order. I'm not convinced we need to do
this given that we get the same thing from #2 on the next writeback
call from the writeback infrastructure.

#3 is really just a band-aid - it doesn't fix the access/wait
inversion problem, just prevents it from becoming a deadlock
situation. I'd prefer we fix the inversion, not sweep it under the
carpet like this.

#3a is really an optimisation that just so happens to include the
band-aid fix of #3.

So it seems that the simplest way to fix this issue is to implement
solution #2

Link: http://lkml.kernel.org/r/20181005054526.21507-1-david@fromorbit.com
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.de>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/page-writeback.c | 33 +++++++++++++++------------------
 1 file changed, 15 insertions(+), 18 deletions(-)

diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 281a46aeae61d..f6a376a510995 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -2141,6 +2141,13 @@ EXPORT_SYMBOL(tag_pages_for_writeback);
  * not miss some pages (e.g., because some other process has cleared TOWRITE
  * tag we set). The rule we follow is that TOWRITE tag can be cleared only
  * by the process clearing the DIRTY tag (and submitting the page for IO).
+ *
+ * To avoid deadlocks between range_cyclic writeback and callers that hold
+ * pages in PageWriteback to aggregate IO until write_cache_pages() returns,
+ * we do not loop back to the start of the file. Doing so causes a page
+ * lock/page writeback access order inversion - we should only ever lock
+ * multiple pages in ascending page->index order, and looping back to the start
+ * of the file violates that rule and causes deadlocks.
  */
 int write_cache_pages(struct address_space *mapping,
 		      struct writeback_control *wbc, writepage_t writepage,
@@ -2155,7 +2162,6 @@ int write_cache_pages(struct address_space *mapping,
 	pgoff_t index;
 	pgoff_t end;		/* Inclusive */
 	pgoff_t done_index;
-	int cycled;
 	int range_whole = 0;
 	int tag;
 
@@ -2163,23 +2169,17 @@ int write_cache_pages(struct address_space *mapping,
 	if (wbc->range_cyclic) {
 		writeback_index = mapping->writeback_index; /* prev offset */
 		index = writeback_index;
-		if (index == 0)
-			cycled = 1;
-		else
-			cycled = 0;
 		end = -1;
 	} else {
 		index = wbc->range_start >> PAGE_SHIFT;
 		end = wbc->range_end >> PAGE_SHIFT;
 		if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
 			range_whole = 1;
-		cycled = 1; /* ignore range_cyclic tests */
 	}
 	if (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages)
 		tag = PAGECACHE_TAG_TOWRITE;
 	else
 		tag = PAGECACHE_TAG_DIRTY;
-retry:
 	if (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages)
 		tag_pages_for_writeback(mapping, index, end);
 	done_index = index;
@@ -2287,17 +2287,14 @@ int write_cache_pages(struct address_space *mapping,
 		pagevec_release(&pvec);
 		cond_resched();
 	}
-	if (!cycled && !done) {
-		/*
-		 * range_cyclic:
-		 * We hit the last page and there is more work to be done: wrap
-		 * back to the start of the file
-		 */
-		cycled = 1;
-		index = 0;
-		end = writeback_index - 1;
-		goto retry;
-	}
+
+	/*
+	 * If we hit the last page and there is more work to be done: wrap
+	 * back the index back to the start of the file for the next
+	 * time we are called.
+	 */
+	if (wbc->range_cyclic && !done)
+		done_index = 0;
 	if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0))
 		mapping->writeback_index = done_index;
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 54/99] macsec: update operstate when lower device changes

[Sasha Levin]

From: Sabrina Dubroca <sd@queasysnail.net>

[ Upstream commit e6ac075882b2afcdf2d5ab328ce4ab42a1eb9593 ]

Like all other virtual devices (macvlan, vlan), the operstate of a
macsec device should match the state of its lower device. This is done
by calling netif_stacked_transfer_operstate from its netdevice notifier.

We also need to call netif_stacked_transfer_operstate when a new macsec
device is created, so that its operstate is set properly. This is only
relevant when we try to bring the device up directly when we create it.

Radu Rendec proposed a similar patch, inspired from the 802.1q driver,
that included changing the administrative state of the macsec device,
instead of just the operstate. This version is similar to what the
macvlan driver does, and updates only the operstate.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Reported-by: Radu Rendec <radu.rendec@gmail.com>
Reported-by: Patrick Talbert <ptalbert@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macsec.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
index da10104be16cf..d2a3825376be5 100644
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -3275,6 +3275,9 @@ static int macsec_newlink(struct net *net, struct net_device *dev,
 	if (err < 0)
 		goto del_dev;
 
+	netif_stacked_transfer_operstate(real_dev, dev);
+	linkwatch_fire_event(dev);
+
 	macsec_generation++;
 
 	return 0;
@@ -3446,6 +3449,20 @@ static int macsec_notify(struct notifier_block *this, unsigned long event,
 		return NOTIFY_DONE;
 
 	switch (event) {
+	case NETDEV_DOWN:
+	case NETDEV_UP:
+	case NETDEV_CHANGE: {
+		struct macsec_dev *m, *n;
+		struct macsec_rxh_data *rxd;
+
+		rxd = macsec_data_rtnl(real_dev);
+		list_for_each_entry_safe(m, n, &rxd->secys, secys) {
+			struct net_device *dev = m->secy.netdev;
+
+			netif_stacked_transfer_operstate(real_dev, dev);
+		}
+		break;
+	}
 	case NETDEV_UNREGISTER: {
 		struct macsec_dev *m, *n;
 		struct macsec_rxh_data *rxd;
-- 
2.20.1

[PATCH AUTOSEL 4.9 55/99] macsec: let the administrator set UP state even if lowerdev is down

[Sasha Levin]

From: Sabrina Dubroca <sd@queasysnail.net>

[ Upstream commit 07bddef9839378bd6f95b393cf24c420529b4ef1 ]

Currently, the kernel doesn't let the administrator set a macsec device
up unless its lower device is currently up. This is inconsistent, as a
macsec device that is up won't automatically go down when its lower
device goes down.

Now that linkstate propagation works, there's really no reason for this
limitation, so let's remove it.

Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Reported-by: Radu Rendec <radu.rendec@gmail.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macsec.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
index d2a3825376be5..a48ed0873cc72 100644
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -2798,9 +2798,6 @@ static int macsec_dev_open(struct net_device *dev)
 	struct net_device *real_dev = macsec->real_dev;
 	int err;
 
-	if (!(real_dev->flags & IFF_UP))
-		return -ENETDOWN;
-
 	err = dev_uc_add(real_dev, dev->dev_addr);
 	if (err < 0)
 		return err;
-- 
2.20.1

[PATCH AUTOSEL 4.9 56/99] um: Make line/tty semantics use true write IRQ

[Sasha Levin]

From: Anton Ivanov <anton.ivanov@cambridgegreys.com>

[ Upstream commit 917e2fd2c53eb3c4162f5397555cbd394390d4bc ]

This fixes a long standing bug where large amounts of output
could freeze the tty (most commonly seen on stdio console).
While the bug has always been there it became more pronounced
after moving to the new interrupt controller.

The line semantics are now changed to have true IRQ write
semantics which should further improve the tty/line subsystem
stability and performance

Signed-off-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/um/drivers/line.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 62087028a9ce1..d2ad45c101137 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -260,7 +260,7 @@ static irqreturn_t line_write_interrupt(int irq, void *data)
 	if (err == 0) {
 		spin_unlock(&line->lock);
 		return IRQ_NONE;
-	} else if (err < 0) {
+	} else if ((err < 0) && (err != -EAGAIN)) {
 		line->head = line->buffer;
 		line->tail = line->buffer;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.9 57/99] linux/bitmap.h: handle constant zero-size bitmaps correctly

[Sasha Levin]

From: Rasmus Villemoes <linux@rasmusvillemoes.dk>

[ Upstream commit 7275b097851a5e2e0dd4da039c7e96b59ac5314e ]

The static inlines in bitmap.h do not handle a compile-time constant
nbits==0 correctly (they dereference the passed src or dst pointers,
despite only 0 words being valid to access).  I had the 0-day buildbot
chew on a patch [1] that would cause build failures for such cases without
complaining, suggesting that we don't have any such users currently, at
least for the 70 .config/arch combinations that was built.  Should any
turn up, make sure they use the out-of-line versions, which do handle
nbits==0 correctly.

This is of course not the most efficient, but it's much less churn than
teaching all the static inlines an "if (zero_const_nbits())", and since we
don't have any current instances, this doesn't affect existing code at
all.

[1] lkml.kernel.org/r/20180815085539.27485-1-linux@rasmusvillemoes.dk

Link: http://lkml.kernel.org/r/20180818131623.8755-3-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Yury Norov <ynorov@caviumnetworks.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/bitmap.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h
index 3b77588a93602..dc56304ac829f 100644
--- a/include/linux/bitmap.h
+++ b/include/linux/bitmap.h
@@ -185,8 +185,13 @@ extern int bitmap_print_to_pagebuf(bool list, char *buf,
 #define BITMAP_FIRST_WORD_MASK(start) (~0UL << ((start) & (BITS_PER_LONG - 1)))
 #define BITMAP_LAST_WORD_MASK(nbits) (~0UL >> (-(nbits) & (BITS_PER_LONG - 1)))
 
+/*
+ * The static inlines below do not handle constant nbits==0 correctly,
+ * so make such users (should any ever turn up) call the out-of-line
+ * versions.
+ */
 #define small_const_nbits(nbits) \
-	(__builtin_constant_p(nbits) && (nbits) <= BITS_PER_LONG)
+	(__builtin_constant_p(nbits) && (nbits) <= BITS_PER_LONG && (nbits) > 0)
 
 static inline void bitmap_zero(unsigned long *dst, unsigned int nbits)
 {
-- 
2.20.1

[PATCH AUTOSEL 4.9 58/99] linux/bitmap.h: fix type of nbits in bitmap_shift_right()

[Sasha Levin]

From: Rasmus Villemoes <linux@rasmusvillemoes.dk>

[ Upstream commit d9873969fa8725dc6a5a21ab788c057fd8719751 ]

Most other bitmap API, including the OOL version __bitmap_shift_right,
take unsigned nbits.  This was accidentally left out from 2fbad29917c98.

Link: http://lkml.kernel.org/r/20180818131623.8755-5-linux@rasmusvillemoes.dk
Fixes: 2fbad29917c98 ("lib: bitmap: change bitmap_shift_right to take unsigned parameters")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reported-by: Yury Norov <ynorov@caviumnetworks.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/bitmap.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h
index dc56304ac829f..dec03c0dbc214 100644
--- a/include/linux/bitmap.h
+++ b/include/linux/bitmap.h
@@ -321,7 +321,7 @@ static __always_inline int bitmap_weight(const unsigned long *src, unsigned int
 }
 
 static inline void bitmap_shift_right(unsigned long *dst, const unsigned long *src,
-				unsigned int shift, int nbits)
+				unsigned int shift, unsigned int nbits)
 {
 	if (small_const_nbits(nbits))
 		*dst = (*src & BITMAP_LAST_WORD_MASK(nbits)) >> shift;
-- 
2.20.1

[PATCH AUTOSEL 4.9 59/99] hfsplus: fix BUG on bnode parent update

[Sasha Levin]

From: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>

[ Upstream commit 19a9d0f1acf75e8be8cfba19c1a34e941846fa2b ]

Creating, renaming or deleting a file may hit BUG_ON() if the first
record of both a leaf node and its parent are changed, and if this
forces the parent to be split.  This bug is triggered by xfstests
generic/027, somewhat rarely; here is a more reliable reproducer:

  truncate -s 50M fs.iso
  mkfs.hfsplus fs.iso
  mount fs.iso /mnt
  i=1000
  while [ $i -le 2400 ]; do
    touch /mnt/$i &>/dev/null
    ((++i))
  done
  i=2400
  while [ $i -ge 1000 ]; do
    mv /mnt/$i /mnt/$(perl -e "print $i x61") &>/dev/null
    ((--i))
  done

The issue is that a newly created bnode is being put twice.  Reset
new_node to NULL in hfs_brec_update_parent() before reaching goto again.

Link: http://lkml.kernel.org/r/5ee1db09b60373a15890f6a7c835d00e76bf601d.1535682461.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/hfsplus/brec.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/hfsplus/brec.c b/fs/hfsplus/brec.c
index 1002a0c08319b..20ce698251ad1 100644
--- a/fs/hfsplus/brec.c
+++ b/fs/hfsplus/brec.c
@@ -447,6 +447,7 @@ static int hfs_brec_update_parent(struct hfs_find_data *fd)
 			/* restore search_key */
 			hfs_bnode_read_key(node, fd->search_key, 14);
 		}
+		new_node = NULL;
 	}
 
 	if (!rec && node->parent)
-- 
2.20.1

[PATCH AUTOSEL 4.9 60/99] hfs: fix BUG on bnode parent update

[Sasha Levin]

From: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>

[ Upstream commit ef75bcc5763d130451a99825f247d301088b790b ]

hfs_brec_update_parent() may hit BUG_ON() if the first record of both a
leaf node and its parent are changed, and if this forces the parent to
be split.  It is not possible for this to happen on a valid hfs
filesystem because the index nodes have fixed length keys.

For reasons I ignore, the hfs module does have support for a number of
hfsplus features.  A corrupt btree header may report variable length
keys and trigger this BUG, so it's better to fix it.

Link: http://lkml.kernel.org/r/cf9b02d57f806217a2b1bf5db8c3e39730d8f603.1535682463.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/hfs/brec.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/hfs/brec.c b/fs/hfs/brec.c
index 2e713673df42f..85dab71bee74f 100644
--- a/fs/hfs/brec.c
+++ b/fs/hfs/brec.c
@@ -444,6 +444,7 @@ static int hfs_brec_update_parent(struct hfs_find_data *fd)
 			/* restore search_key */
 			hfs_bnode_read_key(node, fd->search_key, 14);
 		}
+		new_node = NULL;
 	}
 
 	if (!rec && node->parent)
-- 
2.20.1

[PATCH AUTOSEL 4.9 61/99] hfsplus: prevent btree data loss on ENOSPC

[Sasha Levin]

From: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>

[ Upstream commit d92915c35bfaf763d78bf1d5ac7f183420e3bd99 ]

Inserting or deleting a record in a btree may require splitting several of
its nodes.  If we hit ENOSPC halfway through, the new nodes will be left
orphaned and their records will be lost.  This could mean lost inodes,
extents or xattrs.

Henceforth, check the available disk space before making any changes.
This still leaves the potential problem of corruption on ENOMEM.

The patch can be tested with xfstests generic/027.

Link: http://lkml.kernel.org/r/4596eef22fbda137b4ffa0272d92f0da15364421.1536269129.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/hfsplus/attributes.c | 10 ++++++++++
 fs/hfsplus/btree.c      | 44 ++++++++++++++++++++++++++---------------
 fs/hfsplus/catalog.c    | 24 ++++++++++++++++++++++
 fs/hfsplus/extents.c    |  4 ++++
 fs/hfsplus/hfsplus_fs.h |  2 ++
 5 files changed, 68 insertions(+), 16 deletions(-)

diff --git a/fs/hfsplus/attributes.c b/fs/hfsplus/attributes.c
index e5b221de7de63..d7455ea702878 100644
--- a/fs/hfsplus/attributes.c
+++ b/fs/hfsplus/attributes.c
@@ -216,6 +216,11 @@ int hfsplus_create_attr(struct inode *inode,
 	if (err)
 		goto failed_init_create_attr;
 
+	/* Fail early and avoid ENOSPC during the btree operation */
+	err = hfs_bmap_reserve(fd.tree, fd.tree->depth + 1);
+	if (err)
+		goto failed_create_attr;
+
 	if (name) {
 		err = hfsplus_attr_build_key(sb, fd.search_key,
 						inode->i_ino, name);
@@ -312,6 +317,11 @@ int hfsplus_delete_attr(struct inode *inode, const char *name)
 	if (err)
 		return err;
 
+	/* Fail early and avoid ENOSPC during the btree operation */
+	err = hfs_bmap_reserve(fd.tree, fd.tree->depth);
+	if (err)
+		goto out;
+
 	if (name) {
 		err = hfsplus_attr_build_key(sb, fd.search_key,
 						inode->i_ino, name);
diff --git a/fs/hfsplus/btree.c b/fs/hfsplus/btree.c
index 8d2256454efe6..7e96b4c294f7a 100644
--- a/fs/hfsplus/btree.c
+++ b/fs/hfsplus/btree.c
@@ -341,26 +341,21 @@ static struct hfs_bnode *hfs_bmap_new_bmap(struct hfs_bnode *prev, u32 idx)
 	return node;
 }
 
-struct hfs_bnode *hfs_bmap_alloc(struct hfs_btree *tree)
+/* Make sure @tree has enough space for the @rsvd_nodes */
+int hfs_bmap_reserve(struct hfs_btree *tree, int rsvd_nodes)
 {
-	struct hfs_bnode *node, *next_node;
-	struct page **pagep;
-	u32 nidx, idx;
-	unsigned off;
-	u16 off16;
-	u16 len;
-	u8 *data, byte, m;
-	int i;
+	struct inode *inode = tree->inode;
+	struct hfsplus_inode_info *hip = HFSPLUS_I(inode);
+	u32 count;
+	int res;
 
-	while (!tree->free_nodes) {
-		struct inode *inode = tree->inode;
-		struct hfsplus_inode_info *hip = HFSPLUS_I(inode);
-		u32 count;
-		int res;
+	if (rsvd_nodes <= 0)
+		return 0;
 
+	while (tree->free_nodes < rsvd_nodes) {
 		res = hfsplus_file_extend(inode, hfs_bnode_need_zeroout(tree));
 		if (res)
-			return ERR_PTR(res);
+			return res;
 		hip->phys_size = inode->i_size =
 			(loff_t)hip->alloc_blocks <<
 				HFSPLUS_SB(tree->sb)->alloc_blksz_shift;
@@ -368,9 +363,26 @@ struct hfs_bnode *hfs_bmap_alloc(struct hfs_btree *tree)
 			hip->alloc_blocks << HFSPLUS_SB(tree->sb)->fs_shift;
 		inode_set_bytes(inode, inode->i_size);
 		count = inode->i_size >> tree->node_size_shift;
-		tree->free_nodes = count - tree->node_count;
+		tree->free_nodes += count - tree->node_count;
 		tree->node_count = count;
 	}
+	return 0;
+}
+
+struct hfs_bnode *hfs_bmap_alloc(struct hfs_btree *tree)
+{
+	struct hfs_bnode *node, *next_node;
+	struct page **pagep;
+	u32 nidx, idx;
+	unsigned off;
+	u16 off16;
+	u16 len;
+	u8 *data, byte, m;
+	int i, res;
+
+	res = hfs_bmap_reserve(tree, 1);
+	if (res)
+		return ERR_PTR(res);
 
 	nidx = 0;
 	node = hfs_bnode_find(tree, nidx);
diff --git a/fs/hfsplus/catalog.c b/fs/hfsplus/catalog.c
index a5e00f7a4c143..947da72e72a30 100644
--- a/fs/hfsplus/catalog.c
+++ b/fs/hfsplus/catalog.c
@@ -264,6 +264,14 @@ int hfsplus_create_cat(u32 cnid, struct inode *dir,
 	if (err)
 		return err;
 
+	/*
+	 * Fail early and avoid ENOSPC during the btree operations. We may
+	 * have to split the root node at most once.
+	 */
+	err = hfs_bmap_reserve(fd.tree, 2 * fd.tree->depth);
+	if (err)
+		goto err2;
+
 	hfsplus_cat_build_key_with_cnid(sb, fd.search_key, cnid);
 	entry_size = hfsplus_fill_cat_thread(sb, &entry,
 		S_ISDIR(inode->i_mode) ?
@@ -332,6 +340,14 @@ int hfsplus_delete_cat(u32 cnid, struct inode *dir, const struct qstr *str)
 	if (err)
 		return err;
 
+	/*
+	 * Fail early and avoid ENOSPC during the btree operations. We may
+	 * have to split the root node at most once.
+	 */
+	err = hfs_bmap_reserve(fd.tree, 2 * (int)fd.tree->depth - 2);
+	if (err)
+		goto out;
+
 	if (!str) {
 		int len;
 
@@ -432,6 +448,14 @@ int hfsplus_rename_cat(u32 cnid,
 		return err;
 	dst_fd = src_fd;
 
+	/*
+	 * Fail early and avoid ENOSPC during the btree operations. We may
+	 * have to split the root node at most twice.
+	 */
+	err = hfs_bmap_reserve(src_fd.tree, 4 * (int)src_fd.tree->depth - 1);
+	if (err)
+		goto out;
+
 	/* find the old dir entry and read the data */
 	err = hfsplus_cat_build_key(sb, src_fd.search_key,
 			src_dir->i_ino, src_name);
diff --git a/fs/hfsplus/extents.c b/fs/hfsplus/extents.c
index feca524ce2a5c..ce0b8f8374081 100644
--- a/fs/hfsplus/extents.c
+++ b/fs/hfsplus/extents.c
@@ -99,6 +99,10 @@ static int __hfsplus_ext_write_extent(struct inode *inode,
 	if (hip->extent_state & HFSPLUS_EXT_NEW) {
 		if (res != -ENOENT)
 			return res;
+		/* Fail early and avoid ENOSPC during the btree operation */
+		res = hfs_bmap_reserve(fd->tree, fd->tree->depth + 1);
+		if (res)
+			return res;
 		hfs_brec_insert(fd, hip->cached_extents,
 				sizeof(hfsplus_extent_rec));
 		hip->extent_state &= ~(HFSPLUS_EXT_DIRTY | HFSPLUS_EXT_NEW);
diff --git a/fs/hfsplus/hfsplus_fs.h b/fs/hfsplus/hfsplus_fs.h
index a3f03b2474637..35cd703c66045 100644
--- a/fs/hfsplus/hfsplus_fs.h
+++ b/fs/hfsplus/hfsplus_fs.h
@@ -311,6 +311,7 @@ static inline unsigned short hfsplus_min_io_size(struct super_block *sb)
 #define hfs_btree_open hfsplus_btree_open
 #define hfs_btree_close hfsplus_btree_close
 #define hfs_btree_write hfsplus_btree_write
+#define hfs_bmap_reserve hfsplus_bmap_reserve
 #define hfs_bmap_alloc hfsplus_bmap_alloc
 #define hfs_bmap_free hfsplus_bmap_free
 #define hfs_bnode_read hfsplus_bnode_read
@@ -395,6 +396,7 @@ u32 hfsplus_calc_btree_clump_size(u32 block_size, u32 node_size, u64 sectors,
 struct hfs_btree *hfs_btree_open(struct super_block *sb, u32 id);
 void hfs_btree_close(struct hfs_btree *tree);
 int hfs_btree_write(struct hfs_btree *tree);
+int hfs_bmap_reserve(struct hfs_btree *tree, int rsvd_nodes);
 struct hfs_bnode *hfs_bmap_alloc(struct hfs_btree *tree);
 void hfs_bmap_free(struct hfs_bnode *node);
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 62/99] hfs: prevent btree data loss on ENOSPC

[Sasha Levin]

From: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>

[ Upstream commit 54640c7502e5ed41fbf4eedd499e85f9acc9698f ]

Inserting a new record in a btree may require splitting several of its
nodes.  If we hit ENOSPC halfway through, the new nodes will be left
orphaned and their records will be lost.  This could mean lost inodes or
extents.

Henceforth, check the available disk space before making any changes.
This still leaves the potential problem of corruption on ENOMEM.

There is no need to reserve space before deleting a catalog record, as we
do for hfsplus.  This difference is because hfs index nodes have fixed
length keys.

Link: http://lkml.kernel.org/r/ab5fc8a7d5ffccfd5f27b1cf2cb4ceb6c110da74.1536269131.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/hfs/btree.c   | 41 +++++++++++++++++++++++++----------------
 fs/hfs/btree.h   |  1 +
 fs/hfs/catalog.c | 16 ++++++++++++++++
 fs/hfs/extent.c  |  4 ++++
 4 files changed, 46 insertions(+), 16 deletions(-)

diff --git a/fs/hfs/btree.c b/fs/hfs/btree.c
index 320f4372f1720..77eff447d3014 100644
--- a/fs/hfs/btree.c
+++ b/fs/hfs/btree.c
@@ -219,25 +219,17 @@ static struct hfs_bnode *hfs_bmap_new_bmap(struct hfs_bnode *prev, u32 idx)
 	return node;
 }
 
-struct hfs_bnode *hfs_bmap_alloc(struct hfs_btree *tree)
+/* Make sure @tree has enough space for the @rsvd_nodes */
+int hfs_bmap_reserve(struct hfs_btree *tree, int rsvd_nodes)
 {
-	struct hfs_bnode *node, *next_node;
-	struct page **pagep;
-	u32 nidx, idx;
-	unsigned off;
-	u16 off16;
-	u16 len;
-	u8 *data, byte, m;
-	int i;
-
-	while (!tree->free_nodes) {
-		struct inode *inode = tree->inode;
-		u32 count;
-		int res;
+	struct inode *inode = tree->inode;
+	u32 count;
+	int res;
 
+	while (tree->free_nodes < rsvd_nodes) {
 		res = hfs_extend_file(inode);
 		if (res)
-			return ERR_PTR(res);
+			return res;
 		HFS_I(inode)->phys_size = inode->i_size =
 				(loff_t)HFS_I(inode)->alloc_blocks *
 				HFS_SB(tree->sb)->alloc_blksz;
@@ -245,9 +237,26 @@ struct hfs_bnode *hfs_bmap_alloc(struct hfs_btree *tree)
 					  tree->sb->s_blocksize_bits;
 		inode_set_bytes(inode, inode->i_size);
 		count = inode->i_size >> tree->node_size_shift;
-		tree->free_nodes = count - tree->node_count;
+		tree->free_nodes += count - tree->node_count;
 		tree->node_count = count;
 	}
+	return 0;
+}
+
+struct hfs_bnode *hfs_bmap_alloc(struct hfs_btree *tree)
+{
+	struct hfs_bnode *node, *next_node;
+	struct page **pagep;
+	u32 nidx, idx;
+	unsigned off;
+	u16 off16;
+	u16 len;
+	u8 *data, byte, m;
+	int i, res;
+
+	res = hfs_bmap_reserve(tree, 1);
+	if (res)
+		return ERR_PTR(res);
 
 	nidx = 0;
 	node = hfs_bnode_find(tree, nidx);
diff --git a/fs/hfs/btree.h b/fs/hfs/btree.h
index f6bd266d70b55..2715f416b5a80 100644
--- a/fs/hfs/btree.h
+++ b/fs/hfs/btree.h
@@ -81,6 +81,7 @@ struct hfs_find_data {
 extern struct hfs_btree *hfs_btree_open(struct super_block *, u32, btree_keycmp);
 extern void hfs_btree_close(struct hfs_btree *);
 extern void hfs_btree_write(struct hfs_btree *);
+extern int hfs_bmap_reserve(struct hfs_btree *, int);
 extern struct hfs_bnode * hfs_bmap_alloc(struct hfs_btree *);
 extern void hfs_bmap_free(struct hfs_bnode *node);
 
diff --git a/fs/hfs/catalog.c b/fs/hfs/catalog.c
index 8a66405b0f8b5..d365bf0b8c77d 100644
--- a/fs/hfs/catalog.c
+++ b/fs/hfs/catalog.c
@@ -97,6 +97,14 @@ int hfs_cat_create(u32 cnid, struct inode *dir, const struct qstr *str, struct i
 	if (err)
 		return err;
 
+	/*
+	 * Fail early and avoid ENOSPC during the btree operations. We may
+	 * have to split the root node at most once.
+	 */
+	err = hfs_bmap_reserve(fd.tree, 2 * fd.tree->depth);
+	if (err)
+		goto err2;
+
 	hfs_cat_build_key(sb, fd.search_key, cnid, NULL);
 	entry_size = hfs_cat_build_thread(sb, &entry, S_ISDIR(inode->i_mode) ?
 			HFS_CDR_THD : HFS_CDR_FTH,
@@ -295,6 +303,14 @@ int hfs_cat_move(u32 cnid, struct inode *src_dir, const struct qstr *src_name,
 		return err;
 	dst_fd = src_fd;
 
+	/*
+	 * Fail early and avoid ENOSPC during the btree operations. We may
+	 * have to split the root node at most once.
+	 */
+	err = hfs_bmap_reserve(src_fd.tree, 2 * src_fd.tree->depth);
+	if (err)
+		goto out;
+
 	/* find the old dir entry and read the data */
 	hfs_cat_build_key(sb, src_fd.search_key, src_dir->i_ino, src_name);
 	err = hfs_brec_find(&src_fd);
diff --git a/fs/hfs/extent.c b/fs/hfs/extent.c
index e33a0d36a93eb..1bd1afefe2538 100644
--- a/fs/hfs/extent.c
+++ b/fs/hfs/extent.c
@@ -117,6 +117,10 @@ static int __hfs_ext_write_extent(struct inode *inode, struct hfs_find_data *fd)
 	if (HFS_I(inode)->flags & HFS_FLG_EXT_NEW) {
 		if (res != -ENOENT)
 			return res;
+		/* Fail early and avoid ENOSPC during the btree operation */
+		res = hfs_bmap_reserve(fd->tree, fd->tree->depth + 1);
+		if (res)
+			return res;
 		hfs_brec_insert(fd, HFS_I(inode)->cached_extents, sizeof(hfs_extent_rec));
 		HFS_I(inode)->flags &= ~(HFS_FLG_EXT_DIRTY|HFS_FLG_EXT_NEW);
 	} else {
-- 
2.20.1

[PATCH AUTOSEL 4.9 63/99] hfsplus: fix return value of hfsplus_get_block()

[Sasha Levin]

From: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>

[ Upstream commit 839c3a6a5e1fbc8542d581911b35b2cb5cd29304 ]

Direct writes to empty inodes fail with EIO.  The generic direct-io code
is in part to blame (a patch has been submitted as "direct-io: allow
direct writes to empty inodes"), but hfsplus is worse affected than the
other filesystems because the fallback to buffered I/O doesn't happen.

The problem is the return value of hfsplus_get_block() when called with
!create.  Change it to be more consistent with the other modules.

Link: http://lkml.kernel.org/r/2cd1301404ec7cf1e39c8f11a01a4302f1460ad6.1539195310.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/hfsplus/extents.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/hfsplus/extents.c b/fs/hfsplus/extents.c
index ce0b8f8374081..d93c051559cb8 100644
--- a/fs/hfsplus/extents.c
+++ b/fs/hfsplus/extents.c
@@ -236,7 +236,9 @@ int hfsplus_get_block(struct inode *inode, sector_t iblock,
 	ablock = iblock >> sbi->fs_shift;
 
 	if (iblock >= hip->fs_blocks) {
-		if (iblock > hip->fs_blocks || !create)
+		if (!create)
+			return 0;
+		if (iblock > hip->fs_blocks)
 			return -EIO;
 		if (ablock >= hip->alloc_blocks) {
 			res = hfsplus_file_extend(inode, false);
-- 
2.20.1

[PATCH AUTOSEL 4.9 64/99] hfs: fix return value of hfs_get_block()

[Sasha Levin]

From: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>

[ Upstream commit 1267a07be5ebbff2d2739290f3d043ae137c15b4 ]

Direct writes to empty inodes fail with EIO.  The generic direct-io code
is in part to blame (a patch has been submitted as "direct-io: allow
direct writes to empty inodes"), but hfs is worse affected than the other
filesystems because the fallback to buffered I/O doesn't happen.

The problem is the return value of hfs_get_block() when called with
!create.  Change it to be more consistent with the other modules.

Link: http://lkml.kernel.org/r/4538ab8c35ea37338490525f0f24cbc37227528c.1539195310.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/hfs/extent.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/hfs/extent.c b/fs/hfs/extent.c
index 1bd1afefe2538..16819d2a978b4 100644
--- a/fs/hfs/extent.c
+++ b/fs/hfs/extent.c
@@ -345,7 +345,9 @@ int hfs_get_block(struct inode *inode, sector_t block,
 	ablock = (u32)block / HFS_SB(sb)->fs_div;
 
 	if (block >= HFS_I(inode)->fs_blocks) {
-		if (block > HFS_I(inode)->fs_blocks || !create)
+		if (!create)
+			return 0;
+		if (block > HFS_I(inode)->fs_blocks)
 			return -EIO;
 		if (ablock >= HFS_I(inode)->alloc_blocks) {
 			res = hfs_extend_file(inode);
-- 
2.20.1

[PATCH AUTOSEL 4.9 65/99] hfsplus: update timestamps on truncate()

[Sasha Levin]

From: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>

[ Upstream commit dc8844aada735890a6de109bef327f5df36a982e ]

The vfs takes care of updating ctime and mtime on ftruncate(), but on
truncate() it must be done by the module.

This patch can be tested with xfstests generic/313.

Link: http://lkml.kernel.org/r/9beb0913eea37288599e8e1b7cec8768fb52d1b8.1539316825.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/hfsplus/inode.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c
index 2e796f8302ffa..cfd380e2743d1 100644
--- a/fs/hfsplus/inode.c
+++ b/fs/hfsplus/inode.c
@@ -260,6 +260,7 @@ static int hfsplus_setattr(struct dentry *dentry, struct iattr *attr)
 		}
 		truncate_setsize(inode, attr->ia_size);
 		hfsplus_file_truncate(inode);
+		inode->i_mtime = inode->i_ctime = current_time(inode);
 	}
 
 	setattr_copy(inode, attr);
-- 
2.20.1

[PATCH AUTOSEL 4.9 66/99] hfs: update timestamp on truncate()

[Sasha Levin]

From: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>

[ Upstream commit 8cd3cb5061730af085a3f9890a3352f162b4e20c ]

The vfs takes care of updating mtime on ftruncate(), but on truncate() it
must be done by the module.

Link: http://lkml.kernel.org/r/e1611eda2985b672ed2d8677350b4ad8c2d07e8a.1539316825.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/hfs/inode.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/hfs/inode.c b/fs/hfs/inode.c
index f776acf2378a1..de0d6d4c46b68 100644
--- a/fs/hfs/inode.c
+++ b/fs/hfs/inode.c
@@ -641,6 +641,8 @@ int hfs_inode_setattr(struct dentry *dentry, struct iattr * attr)
 
 		truncate_setsize(inode, attr->ia_size);
 		hfs_file_truncate(inode);
+		inode->i_atime = inode->i_mtime = inode->i_ctime =
+						  current_time(inode);
 	}
 
 	setattr_copy(inode, attr);
-- 
2.20.1

[PATCH AUTOSEL 4.9 67/99] fs/hfs/extent.c: fix array out of bounds read of array extent

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 6c9a3f843a29d6894dfc40df338b91dbd78f0ae3 ]

Currently extent and index i are both being incremented causing an array
out of bounds read on extent[i].  Fix this by removing the extraneous
increment of extent.

Ernesto said:

: This is only triggered when deleting a file with a resource fork.  I
: may be wrong because the documentation isn't clear, but I don't think
: you can create those under linux.  So I guess nobody was testing them.
:
: > A disk space leak, perhaps?
:
: That's what it looks like in general.  hfs_free_extents() won't do
: anything if the block count doesn't add up, and the error will be
: ignored.  Now, if the block count randomly does add up, we could see
: some corruption.

Detected by CoverityScan, CID#711541 ("Out of bounds read")

Link: http://lkml.kernel.org/r/20180831140538.31566-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ernesto A. Fernndez <ernesto.mnd.fernandez@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/hfs/extent.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/hfs/extent.c b/fs/hfs/extent.c
index 16819d2a978b4..cbe4fca96378a 100644
--- a/fs/hfs/extent.c
+++ b/fs/hfs/extent.c
@@ -304,7 +304,7 @@ int hfs_free_fork(struct super_block *sb, struct hfs_cat_file *file, int type)
 		return 0;
 
 	blocks = 0;
-	for (i = 0; i < 3; extent++, i++)
+	for (i = 0; i < 3; i++)
 		blocks += be16_to_cpu(extent[i].count);
 
 	res = hfs_free_extents(sb, extent, blocks, blocks);
-- 
2.20.1

[PATCH AUTOSEL 4.9 68/99] mm/memory_hotplug: make add_memory() take the device_hotplug_lock

[Sasha Levin]

From: David Hildenbrand <david@redhat.com>

[ Upstream commit 8df1d0e4a265f25dc1e7e7624ccdbcb4a6630c89 ]

add_memory() currently does not take the device_hotplug_lock, however
is aleady called under the lock from
	arch/powerpc/platforms/pseries/hotplug-memory.c
	drivers/acpi/acpi_memhotplug.c
to synchronize against CPU hot-remove and similar.

In general, we should hold the device_hotplug_lock when adding memory to
synchronize against online/offline request (e.g.  from user space) - which
already resulted in lock inversions due to device_lock() and
mem_hotplug_lock - see 30467e0b3be ("mm, hotplug: fix concurrent memory
hot-add deadlock").  add_memory()/add_memory_resource() will create memory
block devices, so this really feels like the right thing to do.

Holding the device_hotplug_lock makes sure that a memory block device
can really only be accessed (e.g. via .online/.state) from user space,
once the memory has been fully added to the system.

The lock is not held yet in
	drivers/xen/balloon.c
	arch/powerpc/platforms/powernv/memtrace.c
	drivers/s390/char/sclp_cmd.c
	drivers/hv/hv_balloon.c
So, let's either use the locked variants or take the lock.

Don't export add_memory_resource(), as it once was exported to be used by
XEN, which is never built as a module.  If somebody requires it, we also
have to export a locked variant (as device_hotplug_lock is never
exported).

Link: http://lkml.kernel.org/r/20180925091457.28651-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../platforms/pseries/hotplug-memory.c        |  2 +-
 drivers/acpi/acpi_memhotplug.c                |  2 +-
 drivers/base/memory.c                         |  9 ++++++--
 drivers/xen/balloon.c                         |  3 +++
 include/linux/memory_hotplug.h                |  1 +
 mm/memory_hotplug.c                           | 22 ++++++++++++++++---
 6 files changed, 32 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index c0a0947f43bbb..656bbbd731d03 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -616,7 +616,7 @@ static int dlpar_add_lmb(struct of_drconf_cell *lmb)
 	nid = memory_add_physaddr_to_nid(lmb->base_addr);
 
 	/* Add the memory */
-	rc = add_memory(nid, lmb->base_addr, block_sz);
+	rc = __add_memory(nid, lmb->base_addr, block_sz);
 	if (rc) {
 		dlpar_remove_device_tree_lmb(lmb);
 		dlpar_release_drc(lmb->drc_index);
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 6b0d3ef7309cb..2ccfbb61ca899 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -228,7 +228,7 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
 		if (node < 0)
 			node = memory_add_physaddr_to_nid(info->start_addr);
 
-		result = add_memory(node, info->start_addr, info->length);
+		result = __add_memory(node, info->start_addr, info->length);
 
 		/*
 		 * If the memory block has been used by the kernel, add_memory()
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index c5cdd190b7816..9f96f1b43c15f 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -500,15 +500,20 @@ memory_probe_store(struct device *dev, struct device_attribute *attr,
 	if (phys_addr & ((pages_per_block << PAGE_SHIFT) - 1))
 		return -EINVAL;
 
+	ret = lock_device_hotplug_sysfs();
+	if (ret)
+		goto out;
+
 	nid = memory_add_physaddr_to_nid(phys_addr);
-	ret = add_memory(nid, phys_addr,
-			 MIN_MEMORY_BLOCK_SIZE * sections_per_block);
+	ret = __add_memory(nid, phys_addr,
+			   MIN_MEMORY_BLOCK_SIZE * sections_per_block);
 
 	if (ret)
 		goto out;
 
 	ret = count;
 out:
+	unlock_device_hotplug();
 	return ret;
 }
 
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 6af117af97804..731cf54f75c65 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -358,7 +358,10 @@ static enum bp_state reserve_additional_memory(void)
 	 * callers drop the mutex before trying again.
 	 */
 	mutex_unlock(&balloon_mutex);
+	/* add_memory_resource() requires the device_hotplug lock */
+	lock_device_hotplug();
 	rc = add_memory_resource(nid, resource, memhp_auto_online);
+	unlock_device_hotplug();
 	mutex_lock(&balloon_mutex);
 
 	if (rc) {
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index 134a2f69c21ab..9469eef300952 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -272,6 +272,7 @@ static inline void remove_memory(int nid, u64 start, u64 size) {}
 
 extern int walk_memory_range(unsigned long start_pfn, unsigned long end_pfn,
 		void *arg, int (*func)(struct memory_block *, void *));
+extern int __add_memory(int nid, u64 start, u64 size);
 extern int add_memory(int nid, u64 start, u64 size);
 extern int add_memory_resource(int nid, struct resource *resource, bool online);
 extern int zone_for_memory(int nid, u64 start, u64 size, int zone_default,
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index b4c8d7b9ab820..449999657c0bb 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1340,7 +1340,12 @@ static int online_memory_block(struct memory_block *mem, void *arg)
 	return memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE);
 }
 
-/* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */
+/*
+ * NOTE: The caller must call lock_device_hotplug() to serialize hotplug
+ * and online/offline operations (triggered e.g. by sysfs).
+ *
+ * we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG
+ */
 int __ref add_memory_resource(int nid, struct resource *res, bool online)
 {
 	u64 start, size;
@@ -1418,9 +1423,9 @@ int __ref add_memory_resource(int nid, struct resource *res, bool online)
 	mem_hotplug_done();
 	return ret;
 }
-EXPORT_SYMBOL_GPL(add_memory_resource);
 
-int __ref add_memory(int nid, u64 start, u64 size)
+/* requires device_hotplug_lock, see add_memory_resource() */
+int __ref __add_memory(int nid, u64 start, u64 size)
 {
 	struct resource *res;
 	int ret;
@@ -1434,6 +1439,17 @@ int __ref add_memory(int nid, u64 start, u64 size)
 		release_memory_resource(res);
 	return ret;
 }
+
+int add_memory(int nid, u64 start, u64 size)
+{
+	int rc;
+
+	lock_device_hotplug();
+	rc = __add_memory(nid, start, size);
+	unlock_device_hotplug();
+
+	return rc;
+}
 EXPORT_SYMBOL_GPL(add_memory);
 
 #ifdef CONFIG_MEMORY_HOTREMOVE
-- 
2.20.1

[PATCH AUTOSEL 4.9 69/99] igb: shorten maximum PHC timecounter update interval

[Sasha Levin]

From: Miroslav Lichvar <mlichvar@redhat.com>

[ Upstream commit 094bf4d0e9657f6ea1ee3d7e07ce3970796949ce ]

The timecounter needs to be updated at least once per ~550 seconds in
order to avoid a 40-bit SYSTIM timestamp to be misinterpreted as an old
timestamp.

Since commit 500462a9d ("timers: Switch to a non-cascading wheel"),
scheduling of delayed work seems to be less accurate and a requested
delay of 540 seconds may actually be longer than 550 seconds. Shorten
the delay to 480 seconds to be sure the timecounter is updated in time.

This fixes an issue with HW timestamps on 82580/I350/I354 being off by
~1100 seconds for few seconds every ~9 minutes.

Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/igb/igb_ptp.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index 9eb9b68f8935e..ae1f963b60923 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -65,9 +65,15 @@
  *
  * The 40 bit 82580 SYSTIM overflows every
  *   2^40 * 10^-9 /  60  = 18.3 minutes.
+ *
+ * SYSTIM is converted to real time using a timecounter. As
+ * timecounter_cyc2time() allows old timestamps, the timecounter
+ * needs to be updated at least once per half of the SYSTIM interval.
+ * Scheduling of delayed work is not very accurate, so we aim for 8
+ * minutes to be sure the actual interval is shorter than 9.16 minutes.
  */
 
-#define IGB_SYSTIM_OVERFLOW_PERIOD	(HZ * 60 * 9)
+#define IGB_SYSTIM_OVERFLOW_PERIOD	(HZ * 60 * 8)
 #define IGB_PTP_TX_TIMEOUT		(HZ * 15)
 #define INCPERIOD_82576			BIT(E1000_TIMINCA_16NS_SHIFT)
 #define INCVALUE_82576_MASK		GENMASK(E1000_TIMINCA_16NS_SHIFT - 1, 0)
-- 
2.20.1

[PATCH AUTOSEL 4.9 70/99] ntb_netdev: fix sleep time mismatch

[Sasha Levin]

From: Jon Mason <jdmason@kudzu.us>

[ Upstream commit a861594b1b7ffd630f335b351c4e9f938feadb8e ]

The tx_time should be in usecs (according to the comment above the
variable), but the setting of the timer during the rearming is done in
msecs.  Change it to match the expected units.

Fixes: e74bfeedad08 ("NTB: Add flow control to the ntb_netdev")
Suggested-by: Gerd W. Haeussler <gerd.haeussler@cesys-it.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ntb_netdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ntb_netdev.c b/drivers/net/ntb_netdev.c
index a9acf71568555..03009f1becddc 100644
--- a/drivers/net/ntb_netdev.c
+++ b/drivers/net/ntb_netdev.c
@@ -236,7 +236,7 @@ static void ntb_netdev_tx_timer(unsigned long data)
 	struct ntb_netdev *dev = netdev_priv(ndev);
 
 	if (ntb_transport_tx_free_entry(dev->qp) < tx_stop) {
-		mod_timer(&dev->tx_timer, jiffies + msecs_to_jiffies(tx_time));
+		mod_timer(&dev->tx_timer, jiffies + usecs_to_jiffies(tx_time));
 	} else {
 		/* Make sure anybody stopping the queue after this sees the new
 		 * value of ntb_transport_tx_free_entry()
-- 
2.20.1

[PATCH AUTOSEL 4.9 71/99] ntb: intel: fix return value for ndev_vec_mask()

[Sasha Levin]

From: Dave Jiang <dave.jiang@intel.com>

[ Upstream commit 7756e2b5d68c36e170a111dceea22f7365f83256 ]

ndev_vec_mask() should be returning u64 mask value instead of int.
Otherwise the mask value returned can be incorrect for larger
vectors.

Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers")

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Lucas Van <lucas.van@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ntb/hw/intel/ntb_hw_intel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ntb/hw/intel/ntb_hw_intel.c b/drivers/ntb/hw/intel/ntb_hw_intel.c
index 7310a261c858b..e175cbeba266f 100644
--- a/drivers/ntb/hw/intel/ntb_hw_intel.c
+++ b/drivers/ntb/hw/intel/ntb_hw_intel.c
@@ -330,7 +330,7 @@ static inline int ndev_db_clear_mask(struct intel_ntb_dev *ndev, u64 db_bits,
 	return 0;
 }
 
-static inline int ndev_vec_mask(struct intel_ntb_dev *ndev, int db_vector)
+static inline u64 ndev_vec_mask(struct intel_ntb_dev *ndev, int db_vector)
 {
 	u64 shift, mask;
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 72/99] arm64: makefile fix build of .i file in external module case

[Sasha Levin]

From: Victor Kamensky <kamensky@cisco.com>

[ Upstream commit 98356eb0ae499c63e78073ccedd9a5fc5c563288 ]

After 'a66649dab350 arm64: fix vdso-offsets.h dependency' if
one will try to build .i file in case of external kernel module,
build fails complaining that prepare0 target is missing. This
issue came up with SystemTap when it tries to build variety
of .i files for its own generated kernel modules trying to
figure given kernel features/capabilities.

The issue is that prepare0 is defined in top level Makefile
only if KBUILD_EXTMOD is not defined. .i file rule depends
on prepare and in case KBUILD_EXTMOD defined top level Makefile
contains empty rule for prepare. But after mentioned commit
arch/arm64/Makefile would introduce dependency on prepare0
through its own prepare target.

Fix it to put proper ifdef KBUILD_EXTMOD around code introduced
by mentioned commit. It matches what top level Makefile does.

Acked-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Victor Kamensky <kamensky@cisco.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/Makefile | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index ee94597773fab..8d469aa5fc987 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -134,6 +134,7 @@ archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 	$(Q)$(MAKE) $(clean)=$(boot)/dts
 
+ifeq ($(KBUILD_EXTMOD),)
 # We need to generate vdso-offsets.h before compiling certain files in kernel/.
 # In order to do that, we should use the archprepare target, but we can't since
 # asm-offsets.h is included in some files used to generate vdso-offsets.h, and
@@ -143,6 +144,7 @@ archclean:
 prepare: vdso_prepare
 vdso_prepare: prepare0
 	$(Q)$(MAKE) $(build)=arch/arm64/kernel/vdso include/generated/vdso-offsets.h
+endif
 
 define archhelp
   echo  '* Image.gz      - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'
-- 
2.20.1

[PATCH AUTOSEL 4.9 73/99] ocfs2: don't put and assigning null to bh allocated outside

[Sasha Levin]

From: Changwei Ge <ge.changwei@h3c.com>

[ Upstream commit cf76c78595ca87548ca5e45c862ac9e0949c4687 ]

ocfs2_read_blocks() and ocfs2_read_blocks_sync() are both used to read
several blocks from disk.  Currently, the input argument *bhs* can be
NULL or NOT.  It depends on the caller's behavior.  If the function
fails in reading blocks from disk, the corresponding bh will be assigned
to NULL and put.

Obviously, above process for non-NULL input bh is not appropriate.
Because the caller doesn't even know its bhs are put and re-assigned.

If buffer head is managed by caller, ocfs2_read_blocks and
ocfs2_read_blocks_sync() should not evaluate it to NULL.  It will cause
caller accessing illegal memory, thus crash.

Link: http://lkml.kernel.org/r/HK2PR06MB045285E0F4FBB561F9F2F9B3D5680@HK2PR06MB0452.apcprd06.prod.outlook.com
Signed-off-by: Changwei Ge <ge.changwei@h3c.com>
Reviewed-by: Guozhonghua <guozhonghua@h3c.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ocfs2/buffer_head_io.c | 77 ++++++++++++++++++++++++++++++---------
 1 file changed, 59 insertions(+), 18 deletions(-)

diff --git a/fs/ocfs2/buffer_head_io.c b/fs/ocfs2/buffer_head_io.c
index 935bac253991b..1403c88f2b053 100644
--- a/fs/ocfs2/buffer_head_io.c
+++ b/fs/ocfs2/buffer_head_io.c
@@ -98,25 +98,34 @@ int ocfs2_write_block(struct ocfs2_super *osb, struct buffer_head *bh,
 	return ret;
 }
 
+/* Caller must provide a bhs[] with all NULL or non-NULL entries, so it
+ * will be easier to handle read failure.
+ */
 int ocfs2_read_blocks_sync(struct ocfs2_super *osb, u64 block,
 			   unsigned int nr, struct buffer_head *bhs[])
 {
 	int status = 0;
 	unsigned int i;
 	struct buffer_head *bh;
+	int new_bh = 0;
 
 	trace_ocfs2_read_blocks_sync((unsigned long long)block, nr);
 
 	if (!nr)
 		goto bail;
 
+	/* Don't put buffer head and re-assign it to NULL if it is allocated
+	 * outside since the caller can't be aware of this alternation!
+	 */
+	new_bh = (bhs[0] == NULL);
+
 	for (i = 0 ; i < nr ; i++) {
 		if (bhs[i] == NULL) {
 			bhs[i] = sb_getblk(osb->sb, block++);
 			if (bhs[i] == NULL) {
 				status = -ENOMEM;
 				mlog_errno(status);
-				goto bail;
+				break;
 			}
 		}
 		bh = bhs[i];
@@ -156,9 +165,26 @@ int ocfs2_read_blocks_sync(struct ocfs2_super *osb, u64 block,
 		submit_bh(REQ_OP_READ, 0, bh);
 	}
 
+read_failure:
 	for (i = nr; i > 0; i--) {
 		bh = bhs[i - 1];
 
+		if (unlikely(status)) {
+			if (new_bh && bh) {
+				/* If middle bh fails, let previous bh
+				 * finish its read and then put it to
+				 * aovoid bh leak
+				 */
+				if (!buffer_jbd(bh))
+					wait_on_buffer(bh);
+				put_bh(bh);
+				bhs[i - 1] = NULL;
+			} else if (bh && buffer_uptodate(bh)) {
+				clear_buffer_uptodate(bh);
+			}
+			continue;
+		}
+
 		/* No need to wait on the buffer if it's managed by JBD. */
 		if (!buffer_jbd(bh))
 			wait_on_buffer(bh);
@@ -168,8 +194,7 @@ int ocfs2_read_blocks_sync(struct ocfs2_super *osb, u64 block,
 			 * so we can safely record this and loop back
 			 * to cleanup the other buffers. */
 			status = -EIO;
-			put_bh(bh);
-			bhs[i - 1] = NULL;
+			goto read_failure;
 		}
 	}
 
@@ -177,6 +202,9 @@ int ocfs2_read_blocks_sync(struct ocfs2_super *osb, u64 block,
 	return status;
 }
 
+/* Caller must provide a bhs[] with all NULL or non-NULL entries, so it
+ * will be easier to handle read failure.
+ */
 int ocfs2_read_blocks(struct ocfs2_caching_info *ci, u64 block, int nr,
 		      struct buffer_head *bhs[], int flags,
 		      int (*validate)(struct super_block *sb,
@@ -186,6 +214,7 @@ int ocfs2_read_blocks(struct ocfs2_caching_info *ci, u64 block, int nr,
 	int i, ignore_cache = 0;
 	struct buffer_head *bh;
 	struct super_block *sb = ocfs2_metadata_cache_get_super(ci);
+	int new_bh = 0;
 
 	trace_ocfs2_read_blocks_begin(ci, (unsigned long long)block, nr, flags);
 
@@ -211,6 +240,11 @@ int ocfs2_read_blocks(struct ocfs2_caching_info *ci, u64 block, int nr,
 		goto bail;
 	}
 
+	/* Don't put buffer head and re-assign it to NULL if it is allocated
+	 * outside since the caller can't be aware of this alternation!
+	 */
+	new_bh = (bhs[0] == NULL);
+
 	ocfs2_metadata_cache_io_lock(ci);
 	for (i = 0 ; i < nr ; i++) {
 		if (bhs[i] == NULL) {
@@ -219,7 +253,8 @@ int ocfs2_read_blocks(struct ocfs2_caching_info *ci, u64 block, int nr,
 				ocfs2_metadata_cache_io_unlock(ci);
 				status = -ENOMEM;
 				mlog_errno(status);
-				goto bail;
+				/* Don't forget to put previous bh! */
+				break;
 			}
 		}
 		bh = bhs[i];
@@ -313,16 +348,27 @@ int ocfs2_read_blocks(struct ocfs2_caching_info *ci, u64 block, int nr,
 		}
 	}
 
-	status = 0;
-
+read_failure:
 	for (i = (nr - 1); i >= 0; i--) {
 		bh = bhs[i];
 
 		if (!(flags & OCFS2_BH_READAHEAD)) {
-			if (status) {
-				/* Clear the rest of the buffers on error */
-				put_bh(bh);
-				bhs[i] = NULL;
+			if (unlikely(status)) {
+				/* Clear the buffers on error including those
+				 * ever succeeded in reading
+				 */
+				if (new_bh && bh) {
+					/* If middle bh fails, let previous bh
+					 * finish its read and then put it to
+					 * aovoid bh leak
+					 */
+					if (!buffer_jbd(bh))
+						wait_on_buffer(bh);
+					put_bh(bh);
+					bhs[i] = NULL;
+				} else if (bh && buffer_uptodate(bh)) {
+					clear_buffer_uptodate(bh);
+				}
 				continue;
 			}
 			/* We know this can't have changed as we hold the
@@ -340,9 +386,7 @@ int ocfs2_read_blocks(struct ocfs2_caching_info *ci, u64 block, int nr,
 				 * uptodate. */
 				status = -EIO;
 				clear_buffer_needs_validate(bh);
-				put_bh(bh);
-				bhs[i] = NULL;
-				continue;
+				goto read_failure;
 			}
 
 			if (buffer_needs_validate(bh)) {
@@ -352,11 +396,8 @@ int ocfs2_read_blocks(struct ocfs2_caching_info *ci, u64 block, int nr,
 				BUG_ON(buffer_jbd(bh));
 				clear_buffer_needs_validate(bh);
 				status = validate(sb, bh);
-				if (status) {
-					put_bh(bh);
-					bhs[i] = NULL;
-					continue;
-				}
+				if (status)
+					goto read_failure;
 			}
 		}
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 74/99] ocfs2: fix clusters leak in ocfs2_defrag_extent()

[Sasha Levin]

From: Larry Chen <lchen@suse.com>

[ Upstream commit 6194ae4242dec0c9d604bc05df83aa9260a899e4 ]

ocfs2_defrag_extent() might leak allocated clusters.  When the file
system has insufficient space, the number of claimed clusters might be
less than the caller wants.  If that happens, the original code might
directly commit the transaction without returning clusters.

This patch is based on code in ocfs2_add_clusters_in_btree().

[akpm@linux-foundation.org: include localalloc.h, reduce scope of data_ac]
Link: http://lkml.kernel.org/r/20180904041621.16874-3-lchen@suse.com
Signed-off-by: Larry Chen <lchen@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ocfs2/move_extents.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/fs/ocfs2/move_extents.c b/fs/ocfs2/move_extents.c
index c179afd0051a0..afaa044f5f6bd 100644
--- a/fs/ocfs2/move_extents.c
+++ b/fs/ocfs2/move_extents.c
@@ -25,6 +25,7 @@
 #include "ocfs2_ioctl.h"
 
 #include "alloc.h"
+#include "localalloc.h"
 #include "aops.h"
 #include "dlmglue.h"
 #include "extent_map.h"
@@ -222,6 +223,7 @@ static int ocfs2_defrag_extent(struct ocfs2_move_extents_context *context,
 	struct ocfs2_refcount_tree *ref_tree = NULL;
 	u32 new_phys_cpos, new_len;
 	u64 phys_blkno = ocfs2_clusters_to_blocks(inode->i_sb, phys_cpos);
+	int need_free = 0;
 
 	if ((ext_flags & OCFS2_EXT_REFCOUNTED) && *len) {
 
@@ -315,6 +317,7 @@ static int ocfs2_defrag_extent(struct ocfs2_move_extents_context *context,
 		if (!partial) {
 			context->range->me_flags &= ~OCFS2_MOVE_EXT_FL_COMPLETE;
 			ret = -ENOSPC;
+			need_free = 1;
 			goto out_commit;
 		}
 	}
@@ -339,6 +342,20 @@ static int ocfs2_defrag_extent(struct ocfs2_move_extents_context *context,
 		mlog_errno(ret);
 
 out_commit:
+	if (need_free && context->data_ac) {
+		struct ocfs2_alloc_context *data_ac = context->data_ac;
+
+		if (context->data_ac->ac_which == OCFS2_AC_USE_LOCAL)
+			ocfs2_free_local_alloc_bits(osb, handle, data_ac,
+					new_phys_cpos, new_len);
+		else
+			ocfs2_free_clusters(handle,
+					data_ac->ac_inode,
+					data_ac->ac_bh,
+					ocfs2_clusters_to_blocks(osb->sb, new_phys_cpos),
+					new_len);
+	}
+
 	ocfs2_commit_trans(osb, handle);
 
 out_unlock_mutex:
-- 
2.20.1

[PATCH AUTOSEL 4.9 75/99] net: do not abort bulk send on BQL status

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit fe60faa5063822f2d555f4f326c7dd72a60929bf ]

Before calling dev_hard_start_xmit(), upper layers tried
to cook optimal skb list based on BQL budget.

Problem is that GSO packets can end up comsuming more than
the BQL budget.

Breaking the loop is not useful, since requeued packets
are ahead of any packets still in the qdisc.

It is also more expensive, since next TX completion will
push these packets later, while skbs are not in cpu caches.

It is also a behavior difference with TSO packets, that can
break the BQL limit by a large amount.

Note that drivers should use __netdev_tx_sent_queue()
in order to have optimal xmit_more support, and avoid
useless atomic operations as shown in the following patch.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index 547b4daae5cad..c6fb7e61cb405 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2997,7 +2997,7 @@ struct sk_buff *dev_hard_start_xmit(struct sk_buff *first, struct net_device *de
 		}
 
 		skb = next;
-		if (netif_xmit_stopped(txq) && skb) {
+		if (netif_tx_queue_stopped(txq) && skb) {
 			rc = NETDEV_TX_BUSY;
 			break;
 		}
-- 
2.20.1

[PATCH AUTOSEL 4.9 76/99] sched/fair: Don't increase sd->balance_interval on newidle balance

[Sasha Levin]

From: Valentin Schneider <valentin.schneider@arm.com>

[ Upstream commit 3f130a37c442d5c4d66531b240ebe9abfef426b5 ]

When load_balance() fails to move some load because of task affinity,
we end up increasing sd->balance_interval to delay the next periodic
balance in the hopes that next time we look, that annoying pinned
task(s) will be gone.

However, idle_balance() pays no attention to sd->balance_interval, yet
it will still lead to an increase in balance_interval in case of
pinned tasks.

If we're going through several newidle balances (e.g. we have a
periodic task), this can lead to a huge increase of the
balance_interval in a very small amount of time.

To prevent that, don't increase the balance interval when going
through a newidle balance.

This is a similar approach to what is done in commit 58b26c4c0257
("sched: Increment cache_nice_tries only on periodic lb"), where we
disregard newidle balance and rely on periodic balance for more stable
results.

Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar.Eggemann@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: patrick.bellasi@arm.com
Cc: vincent.guittot@linaro.org
Link: http://lkml.kernel.org/r/1537974727-30788-2-git-send-email-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/fair.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index d8afae1bd5c5e..b765a58cf20f1 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -7950,13 +7950,22 @@ static int load_balance(int this_cpu, struct rq *this_rq,
 	sd->nr_balance_failed = 0;
 
 out_one_pinned:
+	ld_moved = 0;
+
+	/*
+	 * idle_balance() disregards balance intervals, so we could repeatedly
+	 * reach this code, which would lead to balance_interval skyrocketting
+	 * in a short amount of time. Skip the balance_interval increase logic
+	 * to avoid that.
+	 */
+	if (env.idle == CPU_NEWLY_IDLE)
+		goto out;
+
 	/* tune up the balancing interval */
 	if (((env.flags & LBF_ALL_PINNED) &&
 			sd->balance_interval < MAX_PINNED_INTERVAL) ||
 			(sd->balance_interval < sd->max_interval))
 		sd->balance_interval *= 2;
-
-	ld_moved = 0;
 out:
 	return ld_moved;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.9 77/99] audit: print empty EXECVE args

[Sasha Levin]

From: Richard Guy Briggs <rgb@redhat.com>

[ Upstream commit ea956d8be91edc702a98b7fe1f9463e7ca8c42ab ]

Empty executable arguments were being skipped when printing out the list
of arguments in an EXECVE record, making it appear they were somehow
lost.  Include empty arguments as an itemized empty string.

Reproducer:
	autrace /bin/ls "" "/etc"
	ausearch --start recent -m execve -i | grep EXECVE
	type=EXECVE msg=audit(10/03/2018 13:04:03.208:1391) : argc=3 a0=/bin/ls a2=/etc

With fix:
	type=EXECVE msg=audit(10/03/2018 21:51:38.290:194) : argc=3 a0=/bin/ls a1= a2=/etc
	type=EXECVE msg=audit(1538617898.290:194): argc=3 a0="/bin/ls" a1="" a2="/etc"

Passes audit-testsuite.  GH issue tracker at
https://github.com/linux-audit/audit-kernel/issues/99

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: cleaned up the commit metadata]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/auditsc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index c2aaf539728fb..854e90be1a023 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -1096,7 +1096,7 @@ static void audit_log_execve_info(struct audit_context *context,
 		}
 
 		/* write as much as we can to the audit log */
-		if (len_buf > 0) {
+		if (len_buf >= 0) {
 			/* NOTE: some magic numbers here - basically if we
 			 *       can't fit a reasonable amount of data into the
 			 *       existing audit buffer, flush it and start with
-- 
2.20.1

[PATCH AUTOSEL 4.9 78/99] wlcore: Fix the return value in case of error in 'wlcore_vendor_cmd_smart_config_start()'

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit 3419348a97bcc256238101129d69b600ceb5cc70 ]

We return 0 unconditionally at the end of
'wlcore_vendor_cmd_smart_config_start()'.
However, 'ret' is set to some error codes in several error handling paths
and we already return some error codes at the beginning of the function.

Return 'ret' instead to propagate the error code.

Fixes: 80ff8063e87c ("wlcore: handle smart config vendor commands")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ti/wlcore/vendor_cmd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ti/wlcore/vendor_cmd.c b/drivers/net/wireless/ti/wlcore/vendor_cmd.c
index fd4e9ba176c9b..332a3a5c1c900 100644
--- a/drivers/net/wireless/ti/wlcore/vendor_cmd.c
+++ b/drivers/net/wireless/ti/wlcore/vendor_cmd.c
@@ -66,7 +66,7 @@ wlcore_vendor_cmd_smart_config_start(struct wiphy *wiphy,
 out:
 	mutex_unlock(&wl->mutex);
 
-	return 0;
+	return ret;
 }
 
 static int
-- 
2.20.1

[PATCH AUTOSEL 4.9 79/99] rtl8xxxu: Fix missing break in switch

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>

[ Upstream commit 307b00c5e695857ca92fc6a4b8ab6c48f988a1b1 ]

Add missing break statement in order to prevent the code from falling
through to the default case.

Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 4e725d165aa60..e78545d4add3c 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -5660,6 +5660,7 @@ static int rtl8xxxu_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		break;
 	case WLAN_CIPHER_SUITE_TKIP:
 		key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+		break;
 	default:
 		return -EOPNOTSUPP;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.9 80/99] brcmsmac: never log "tid x is not agg'able" by default

[Sasha Levin]

From: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>

[ Upstream commit 96fca788e5788b7ea3b0050eb35a343637e0a465 ]

This message greatly spams the log under heavy Tx of frames with BK access
class which is especially true when operating as AP. It is also not informative
as the "agg'ablity" of TIDs are set once and never change.
Fix this by logging only in debug mode.

Signed-off-by: Ali MJ Al-Nasrawy <alimjalnasrawy@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c    | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
index a620b2f6c7c4c..b820e80d4b4c2 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c
@@ -846,8 +846,8 @@ brcms_ops_ampdu_action(struct ieee80211_hw *hw,
 		status = brcms_c_aggregatable(wl->wlc, tid);
 		spin_unlock_bh(&wl->lock);
 		if (!status) {
-			brcms_err(wl->wlc->hw->d11core,
-				  "START: tid %d is not agg\'able\n", tid);
+			brcms_dbg_ht(wl->wlc->hw->d11core,
+				     "START: tid %d is not agg\'able\n", tid);
 			return -EINVAL;
 		}
 		ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
-- 
2.20.1

[PATCH AUTOSEL 4.9 81/99] wireless: airo: potential buffer overflow in sprintf()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 3d39e1bb1c88f32820c5f9271f2c8c2fb9a52bac ]

It looks like we wanted to print a maximum of BSSList_rid.ssidLen bytes
of the ssid, but we accidentally use "%*s" (width) instead of "%.*s"
(precision) so if the ssid doesn't have a NUL terminator this could lead
to an overflow.

Static analysis.  Not tested.

Fixes: e174961ca1a0 ("net: convert print_mac to %pM")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/cisco/airo.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/cisco/airo.c b/drivers/net/wireless/cisco/airo.c
index 69b826d229c5b..04939e576ee02 100644
--- a/drivers/net/wireless/cisco/airo.c
+++ b/drivers/net/wireless/cisco/airo.c
@@ -5472,7 +5472,7 @@ static int proc_BSSList_open( struct inode *inode, struct file *file ) {
            we have to add a spin lock... */
 	rc = readBSSListRid(ai, doLoseSync, &BSSList_rid);
 	while(rc == 0 && BSSList_rid.index != cpu_to_le16(0xffff)) {
-		ptr += sprintf(ptr, "%pM %*s rssi = %d",
+		ptr += sprintf(ptr, "%pM %.*s rssi = %d",
 			       BSSList_rid.bssid,
 				(int)BSSList_rid.ssidLen,
 				BSSList_rid.ssid,
-- 
2.20.1

[PATCH AUTOSEL 4.9 82/99] rtlwifi: rtl8192de: Fix misleading REG_MCUFWDL information

[Sasha Levin]

From: Shaokun Zhang <zhangshaokun@hisilicon.com>

[ Upstream commit 7d129adff3afbd3a449bc3593f2064ac546d58d3 ]

RT_TRACE shows REG_MCUFWDL value as a decimal value with a '0x'
prefix, which is somewhat misleading.

Fix it to print hexadecimal, as was intended.

Cc: Ping-Ke Shih <pkshih@realtek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
index 8de29cc3ced07..a24644f34e650 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/fw.c
@@ -234,7 +234,7 @@ static int _rtl92d_fw_init(struct ieee80211_hw *hw)
 			 rtl_read_byte(rtlpriv, FW_MAC1_READY));
 	}
 	RT_TRACE(rtlpriv, COMP_FW, DBG_DMESG,
-		 "Polling FW ready fail!! REG_MCUFWDL:0x%08ul\n",
+		 "Polling FW ready fail!! REG_MCUFWDL:0x%08x\n",
 		 rtl_read_dword(rtlpriv, REG_MCUFWDL));
 	return -1;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.9 83/99] scsi: mpt3sas: Fix Sync cache command failure during driver unload

[Sasha Levin]

From: Suganath Prabu <suganath-prabu.subramani@broadcom.com>

[ Upstream commit 9029a72500b95578a35877a43473b82cb0386c53 ]

This is to fix SYNC CACHE and START STOP command failures with
DID_NO_CONNECT during driver unload.

In driver's IO submission patch (i.e. in driver's .queuecommand()) driver
won't allow any SCSI commands to the IOC when ioc->remove_host flag is set
and hence SYNC CACHE commands which are issued to the target drives (where
write cache is enabled) during driver unload time is failed with
DID_NO_CONNECT status.

Now modified the driver to allow SYNC CACHE and START STOP commands to IOC,
even when remove_host flag is set.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mpt3sas/mpt3sas_scsih.c | 36 +++++++++++++++++++++++++++-
 1 file changed, 35 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index ec48c010a3bab..aa2078d7e23e2 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -3297,6 +3297,40 @@ _scsih_tm_tr_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
 	return _scsih_check_for_pending_tm(ioc, smid);
 }
 
+/** _scsih_allow_scmd_to_device - check whether scmd needs to
+ *				 issue to IOC or not.
+ * @ioc: per adapter object
+ * @scmd: pointer to scsi command object
+ *
+ * Returns true if scmd can be issued to IOC otherwise returns false.
+ */
+inline bool _scsih_allow_scmd_to_device(struct MPT3SAS_ADAPTER *ioc,
+	struct scsi_cmnd *scmd)
+{
+
+	if (ioc->pci_error_recovery)
+		return false;
+
+	if (ioc->hba_mpi_version_belonged == MPI2_VERSION) {
+		if (ioc->remove_host)
+			return false;
+
+		return true;
+	}
+
+	if (ioc->remove_host) {
+
+		switch (scmd->cmnd[0]) {
+		case SYNCHRONIZE_CACHE:
+		case START_STOP:
+			return true;
+		default:
+			return false;
+		}
+	}
+
+	return true;
+}
 
 /**
  * _scsih_sas_control_complete - completion routine
@@ -4059,7 +4093,7 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
 		return 0;
 	}
 
-	if (ioc->pci_error_recovery || ioc->remove_host) {
+	if (!(_scsih_allow_scmd_to_device(ioc, scmd))) {
 		scmd->result = DID_NO_CONNECT << 16;
 		scmd->scsi_done(scmd);
 		return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.9 84/99] scsi: mpt3sas: Fix driver modifying persistent data in Manufacturing page11

[Sasha Levin]

From: Suganath Prabu <suganath-prabu.subramani@broadcom.com>

[ Upstream commit 97f35194093362a63b33caba2485521ddabe2c95 ]

Currently driver is modifying both current & NVRAM/persistent data in
Manufacturing page11. Driver should change only current copy of
Manufacturing page11. It should not modify the persistent data.

So removed the section of code where driver is modifying the persistent
data of Manufacturing page11.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/mpt3sas/mpt3sas_config.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_config.c b/drivers/scsi/mpt3sas/mpt3sas_config.c
index cebfd734fd769..a9fef0cd382bd 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_config.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_config.c
@@ -674,10 +674,6 @@ mpt3sas_config_set_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc,
 	r = _config_request(ioc, &mpi_request, mpi_reply,
 	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
 	    sizeof(*config_page));
-	mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
-	r = _config_request(ioc, &mpi_request, mpi_reply,
-	    MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
-	    sizeof(*config_page));
  out:
 	return r;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.9 85/99] scsi: megaraid_sas: Fix msleep granularity

[Sasha Levin]

From: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>

[ Upstream commit 9155cf30a3c4ef97e225d6daddf9bd4b173267e8 ]

In megasas_transition_to_ready() driver waits 180seconds for controller to
change FW state. Here we are calling msleep(1) in a loop for this.  As
explained in timers-howto.txt, msleep(1) will actually sleep longer than
1ms. If a faulty controller is connected, we will end up waiting for much
more than 180 seconds causing unnecessary delays during load.

Change the granularity of msleep() call from 1ms to 1000ms.

Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/megaraid/megaraid_sas_base.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index d90693b2767fd..c5cc002dfdd5c 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -3694,12 +3694,12 @@ megasas_transition_to_ready(struct megasas_instance *instance, int ocr)
 		/*
 		 * The cur_state should not last for more than max_wait secs
 		 */
-		for (i = 0; i < (max_wait * 1000); i++) {
+		for (i = 0; i < max_wait; i++) {
 			curr_abs_state = instance->instancet->
 				read_fw_status_reg(instance->reg_set);
 
 			if (abs_state == curr_abs_state) {
-				msleep(1);
+				msleep(1000);
 			} else
 				break;
 		}
-- 
2.20.1

[PATCH AUTOSEL 4.9 86/99] scsi: lpfc: fcoe: Fix link down issue after 1000+ link bounces

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 036cad1f1ac9ce03e2db94b8460f98eaf1e1ee4c ]

On FCoE adapters, when running link bounce test in a loop, initiator
failed to login with switch switch and required driver reload to
recover. Switch reached a point where all subsequent FLOGIs would be
LS_RJT'd. Further testing showed the condition to be related to not
performing FCF discovery between FLOGI's.

Fix by monitoring FLOGI failures and once a repeated error is seen
repeat FCF discovery.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_els.c     |  2 ++
 drivers/scsi/lpfc/lpfc_hbadisc.c | 20 ++++++++++++++++++++
 drivers/scsi/lpfc/lpfc_init.c    |  2 +-
 drivers/scsi/lpfc/lpfc_sli.c     | 11 ++---------
 drivers/scsi/lpfc/lpfc_sli4.h    |  1 +
 5 files changed, 26 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index b5be4df05733f..3702497b5b169 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1141,6 +1141,7 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 			phba->fcf.fcf_flag &= ~FCF_DISCOVERY;
 			phba->hba_flag &= ~(FCF_RR_INPROG | HBA_DEVLOSS_TMO);
 			spin_unlock_irq(&phba->hbalock);
+			phba->fcf.fcf_redisc_attempted = 0; /* reset */
 			goto out;
 		}
 		if (!rc) {
@@ -1155,6 +1156,7 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 			phba->fcf.fcf_flag &= ~FCF_DISCOVERY;
 			phba->hba_flag &= ~(FCF_RR_INPROG | HBA_DEVLOSS_TMO);
 			spin_unlock_irq(&phba->hbalock);
+			phba->fcf.fcf_redisc_attempted = 0; /* reset */
 			goto out;
 		}
 	}
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 9cca5ddbc50cc..6eaba16768461 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1969,6 +1969,26 @@ int lpfc_sli4_fcf_rr_next_proc(struct lpfc_vport *vport, uint16_t fcf_index)
 				"failover and change port state:x%x/x%x\n",
 				phba->pport->port_state, LPFC_VPORT_UNKNOWN);
 		phba->pport->port_state = LPFC_VPORT_UNKNOWN;
+
+		if (!phba->fcf.fcf_redisc_attempted) {
+			lpfc_unregister_fcf(phba);
+
+			rc = lpfc_sli4_redisc_fcf_table(phba);
+			if (!rc) {
+				lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
+						"3195 Rediscover FCF table\n");
+				phba->fcf.fcf_redisc_attempted = 1;
+				lpfc_sli4_clear_fcf_rr_bmask(phba);
+			} else {
+				lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
+						"3196 Rediscover FCF table "
+						"failed. Status:x%x\n", rc);
+			}
+		} else {
+			lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
+					"3197 Already rediscover FCF table "
+					"attempted. No more retry\n");
+		}
 		goto stop_flogi_current_fcf;
 	} else {
 		lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_ELS,
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index e9ea8f4ea2c92..2f80b2c0409e0 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -4444,7 +4444,7 @@ lpfc_sli4_async_fip_evt(struct lpfc_hba *phba,
 			break;
 		}
 		/* If fast FCF failover rescan event is pending, do nothing */
-		if (phba->fcf.fcf_flag & FCF_REDISC_EVT) {
+		if (phba->fcf.fcf_flag & (FCF_REDISC_EVT | FCF_REDISC_PEND)) {
 			spin_unlock_irq(&phba->hbalock);
 			break;
 		}
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index c05fc61a383b2..e1e0feb250031 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -16553,15 +16553,8 @@ lpfc_sli4_fcf_rr_next_index_get(struct lpfc_hba *phba)
 			goto initial_priority;
 		lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
 				"2844 No roundrobin failover FCF available\n");
-		if (next_fcf_index >= LPFC_SLI4_FCF_TBL_INDX_MAX)
-			return LPFC_FCOE_FCF_NEXT_NONE;
-		else {
-			lpfc_printf_log(phba, KERN_WARNING, LOG_FIP,
-				"3063 Only FCF available idx %d, flag %x\n",
-				next_fcf_index,
-			phba->fcf.fcf_pri[next_fcf_index].fcf_rec.flag);
-			return next_fcf_index;
-		}
+
+		return LPFC_FCOE_FCF_NEXT_NONE;
 	}
 
 	if (next_fcf_index < LPFC_SLI4_FCF_TBL_INDX_MAX &&
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index 0b88b5703e0f1..9c69c4215de30 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -237,6 +237,7 @@ struct lpfc_fcf {
 #define FCF_REDISC_EVT	0x100 /* FCF rediscovery event to worker thread */
 #define FCF_REDISC_FOV	0x200 /* Post FCF rediscovery fast failover */
 #define FCF_REDISC_PROG (FCF_REDISC_PEND | FCF_REDISC_EVT)
+	uint16_t fcf_redisc_attempted;
 	uint32_t addr_mode;
 	uint32_t eligible_fcf_cnt;
 	struct lpfc_fcf_rec current_rec;
-- 
2.20.1

[PATCH AUTOSEL 4.9 87/99] dlm: fix invalid free

[Sasha Levin]

From: Tycho Andersen <tycho@tycho.ws>

[ Upstream commit d968b4e240cfe39d39d80483bac8bca8716fd93c ]

dlm_config_nodes() does not allocate nodes on failure, so we should not
free() nodes when it fails.

Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/dlm/member.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/dlm/member.c b/fs/dlm/member.c
index 9c47f1c14a8ba..a47ae99f7bcbc 100644
--- a/fs/dlm/member.c
+++ b/fs/dlm/member.c
@@ -683,7 +683,7 @@ int dlm_ls_start(struct dlm_ls *ls)
 
 	error = dlm_config_nodes(ls->ls_name, &nodes, &count);
 	if (error < 0)
-		goto fail;
+		goto fail_rv;
 
 	spin_lock(&ls->ls_recover_lock);
 
@@ -715,8 +715,9 @@ int dlm_ls_start(struct dlm_ls *ls)
 	return 0;
 
  fail:
-	kfree(rv);
 	kfree(nodes);
+ fail_rv:
+	kfree(rv);
 	return error;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 88/99] dlm: don't leak kernel pointer to userspace

[Sasha Levin]

From: Tycho Andersen <tycho@tycho.ws>

[ Upstream commit 9de30f3f7f4d31037cfbb7c787e1089c1944b3a7 ]

In copy_result_to_user(), we first create a struct dlm_lock_result, which
contains a struct dlm_lksb, the last member of which is a pointer to the
lvb. Unfortunately, we copy the entire struct dlm_lksb to the result
struct, which is then copied to userspace at the end of the function,
leaking the contents of sb_lvbptr, which is a valid kernel pointer in some
cases (indeed, later in the same function the data it points to is copied
to userspace).

It is an error to leak kernel pointers to userspace, as it undermines KASLR
protections (see e.g. 65eea8edc31 ("floppy: Do not copy a kernel pointer to
user memory in FDGETPRM ioctl") for another example of this).

Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/dlm/user.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/dlm/user.c b/fs/dlm/user.c
index 9ac65914ab5b0..57f2aacec97f5 100644
--- a/fs/dlm/user.c
+++ b/fs/dlm/user.c
@@ -700,7 +700,7 @@ static int copy_result_to_user(struct dlm_user_args *ua, int compat,
 	result.version[0] = DLM_DEVICE_VERSION_MAJOR;
 	result.version[1] = DLM_DEVICE_VERSION_MINOR;
 	result.version[2] = DLM_DEVICE_VERSION_PATCH;
-	memcpy(&result.lksb, &ua->lksb, sizeof(struct dlm_lksb));
+	memcpy(&result.lksb, &ua->lksb, offsetof(struct dlm_lksb, sb_lvbptr));
 	result.user_lksb = ua->user_lksb;
 
 	/* FIXME: dlm1 provides for the user's bastparam/addr to not be updated
-- 
2.20.1

[PATCH AUTOSEL 4.9 89/99] vrf: mark skb for multicast or link-local as enslaved to VRF

[Sasha Levin]

From: Mike Manning <mmanning@vyatta.att-mail.com>

[ Upstream commit 6f12fa775530195a501fb090d092c637f32d0cc5 ]

The skb for packets that are multicast or to a link-local address are
not marked as being enslaved to a VRF, if they are received on a socket
bound to the VRF. This is needed for ND and it is preferable for the
kernel not to have to deal with the additional use-cases if ll or mcast
packets are handled as enslaved. However, this does not allow service
instances listening on unbound and bound to VRF sockets to distinguish
the VRF used, if packets are sent as multicast or to a link-local
address. The fix is for the VRF driver to also mark these skb as being
enslaved to the VRF.

Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/vrf.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c
index 3b6e908d31646..39aafe69d3b12 100644
--- a/drivers/net/vrf.c
+++ b/drivers/net/vrf.c
@@ -967,24 +967,23 @@ static struct sk_buff *vrf_ip6_rcv(struct net_device *vrf_dev,
 				   struct sk_buff *skb)
 {
 	int orig_iif = skb->skb_iif;
-	bool need_strict;
+	bool need_strict = rt6_need_strict(&ipv6_hdr(skb)->daddr);
+	bool is_ndisc = ipv6_ndisc_frame(skb);
 
-	/* loopback traffic; do not push through packet taps again.
-	 * Reset pkt_type for upper layers to process skb
+	/* loopback, multicast & non-ND link-local traffic; do not push through
+	 * packet taps again. Reset pkt_type for upper layers to process skb
 	 */
-	if (skb->pkt_type == PACKET_LOOPBACK) {
+	if (skb->pkt_type == PACKET_LOOPBACK || (need_strict && !is_ndisc)) {
 		skb->dev = vrf_dev;
 		skb->skb_iif = vrf_dev->ifindex;
 		IP6CB(skb)->flags |= IP6SKB_L3SLAVE;
-		skb->pkt_type = PACKET_HOST;
+		if (skb->pkt_type == PACKET_LOOPBACK)
+			skb->pkt_type = PACKET_HOST;
 		goto out;
 	}
 
-	/* if packet is NDISC or addressed to multicast or link-local
-	 * then keep the ingress interface
-	 */
-	need_strict = rt6_need_strict(&ipv6_hdr(skb)->daddr);
-	if (!ipv6_ndisc_frame(skb) && !need_strict) {
+	/* if packet is NDISC then keep the ingress interface */
+	if (!is_ndisc) {
 		vrf_rx_stats(vrf_dev, skb->len);
 		skb->dev = vrf_dev;
 		skb->skb_iif = vrf_dev->ifindex;
-- 
2.20.1

[PATCH AUTOSEL 4.9 90/99] ACPICA: Use %d for signed int print formatting instead of %u

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit f8ddf49b420112e28bdd23d7ad52d7991a0ccbe3 ]

Fix warnings found using static analysis with cppcheck, use %d printf
format specifier for signed ints rather than %u

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/power/acpi/tools/acpidump/apmain.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/power/acpi/tools/acpidump/apmain.c b/tools/power/acpi/tools/acpidump/apmain.c
index 7ff46be908f0b..d426fec3b1d34 100644
--- a/tools/power/acpi/tools/acpidump/apmain.c
+++ b/tools/power/acpi/tools/acpidump/apmain.c
@@ -139,7 +139,7 @@ static int ap_insert_action(char *argument, u32 to_be_done)
 
 	current_action++;
 	if (current_action > AP_MAX_ACTIONS) {
-		fprintf(stderr, "Too many table options (max %u)\n",
+		fprintf(stderr, "Too many table options (max %d)\n",
 			AP_MAX_ACTIONS);
 		return (-1);
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.9 91/99] net: bcmgenet: return correct value 'ret' from bcmgenet_power_down

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 0db55093b56618088b9a1d445eb6e43b311bea33 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/ethernet/broadcom/genet/bcmgenet.c: In function 'bcmgenet_power_down':
drivers/net/ethernet/broadcom/genet/bcmgenet.c:1136:6: warning:
 variable 'ret' set but not used [-Wunused-but-set-variable]

bcmgenet_power_down should return 'ret' instead of 0.

Fixes: ca8cf341903f ("net: bcmgenet: propagate errors from bcmgenet_power_down")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 4a4782b3cc1b1..a234044805977 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1078,7 +1078,7 @@ static int bcmgenet_power_down(struct bcmgenet_priv *priv,
 		break;
 	}
 
-	return 0;
+	return ret;
 }
 
 static void bcmgenet_power_up(struct bcmgenet_priv *priv,
-- 
2.20.1

[PATCH AUTOSEL 4.9 92/99] sock: Reset dst when changing sk_mark via setsockopt

[Sasha Levin]

From: David Barmann <david.barmann@stackpath.com>

[ Upstream commit 50254256f382c56bde87d970f3d0d02fdb76ec70 ]

When setting the SO_MARK socket option, if the mark changes, the dst
needs to be reset so that a new route lookup is performed.

This fixes the case where an application wants to change routing by
setting a new sk_mark.  If this is done after some packets have already
been sent, the dst is cached and has no effect.

Signed-off-by: David Barmann <david.barmann@stackpath.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/sock.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/core/sock.c b/net/core/sock.c
index d224933514074..9178c16543758 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -945,10 +945,12 @@ int sock_setsockopt(struct socket *sock, int level, int optname,
 			clear_bit(SOCK_PASSSEC, &sock->flags);
 		break;
 	case SO_MARK:
-		if (!ns_capable(sock_net(sk)->user_ns, CAP_NET_ADMIN))
+		if (!ns_capable(sock_net(sk)->user_ns, CAP_NET_ADMIN)) {
 			ret = -EPERM;
-		else
+		} else if (val != sk->sk_mark) {
 			sk->sk_mark = val;
+			sk_dst_reset(sk);
+		}
 		break;
 
 	case SO_RXQ_OVFL:
-- 
2.20.1

[PATCH AUTOSEL 4.9 93/99] pinctrl: qcom: spmi-gpio: fix gpio-hog related boot issues

[Sasha Levin]

From: Brian Masney <masneyb@onstation.org>

[ Upstream commit 149a96047237574b756d872007c006acd0cc6687 ]

When attempting to setup up a gpio hog, device probing would repeatedly
fail with -EPROBE_DEFERED errors. It was caused by a circular dependency
between the gpio and pinctrl frameworks. If the gpio-ranges property is
present in device tree, then the gpio framework will handle the gpio pin
registration and eliminate the circular dependency.

See Christian Lamparter's commit a86caa9ba5d7 ("pinctrl: msm: fix
gpio-hog related boot issues") for a detailed commit message that
explains the issue in much more detail. The code comment in this commit
came from Christian's commit.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
index 8093afd17aa4f..69641c9e7d179 100644
--- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
@@ -790,10 +790,23 @@ static int pmic_gpio_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = gpiochip_add_pin_range(&state->chip, dev_name(dev), 0, 0, npins);
-	if (ret) {
-		dev_err(dev, "failed to add pin range\n");
-		goto err_range;
+	/*
+	 * For DeviceTree-supported systems, the gpio core checks the
+	 * pinctrl's device node for the "gpio-ranges" property.
+	 * If it is present, it takes care of adding the pin ranges
+	 * for the driver. In this case the driver can skip ahead.
+	 *
+	 * In order to remain compatible with older, existing DeviceTree
+	 * files which don't set the "gpio-ranges" property or systems that
+	 * utilize ACPI the driver has to call gpiochip_add_pin_range().
+	 */
+	if (!of_property_read_bool(dev->of_node, "gpio-ranges")) {
+		ret = gpiochip_add_pin_range(&state->chip, dev_name(dev), 0, 0,
+					     npins);
+		if (ret) {
+			dev_err(dev, "failed to add pin range\n");
+			goto err_range;
+		}
 	}
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.9 94/99] pinctrl: lpc18xx: Use define directive for PIN_CONFIG_GPIO_PIN_INT

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit f24bfb39975c241374cadebbd037c17960cf1412 ]

Clang warns when one enumerated type is implicitly converted to another:

drivers/pinctrl/pinctrl-lpc18xx.c:643:29: warning: implicit conversion
from enumeration type 'enum lpc18xx_pin_config_param' to different
enumeration type 'enum pin_config_param' [-Wenum-conversion]
        {"nxp,gpio-pin-interrupt", PIN_CONFIG_GPIO_PIN_INT, 0},
        ~                          ^~~~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/pinctrl-lpc18xx.c:648:12: warning: implicit conversion
from enumeration type 'enum lpc18xx_pin_config_param' to different
enumeration type 'enum pin_config_param' [-Wenum-conversion]
        PCONFDUMP(PIN_CONFIG_GPIO_PIN_INT, "gpio pin int", NULL, true),
        ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from
macro 'PCONFDUMP'
        .param = a, .display = b, .format = c, .has_arg = d     \
                 ^
2 warnings generated.

It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.

Link: https://github.com/ClangBuiltLinux/linux/issues/140
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-lpc18xx.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-lpc18xx.c b/drivers/pinctrl/pinctrl-lpc18xx.c
index e053f1fa55120..ab2a451f31562 100644
--- a/drivers/pinctrl/pinctrl-lpc18xx.c
+++ b/drivers/pinctrl/pinctrl-lpc18xx.c
@@ -630,14 +630,8 @@ static const struct pinctrl_pin_desc lpc18xx_pins[] = {
 	LPC18XX_PIN(i2c0_sda, PIN_I2C0_SDA),
 };
 
-/**
- * enum lpc18xx_pin_config_param - possible pin configuration parameters
- * @PIN_CONFIG_GPIO_PIN_INT: route gpio to the gpio pin interrupt
- * 	controller.
- */
-enum lpc18xx_pin_config_param {
-	PIN_CONFIG_GPIO_PIN_INT = PIN_CONFIG_END + 1,
-};
+/* PIN_CONFIG_GPIO_PIN_INT: route gpio to the gpio pin interrupt controller */
+#define PIN_CONFIG_GPIO_PIN_INT		(PIN_CONFIG_END + 1)
 
 static const struct pinconf_generic_params lpc18xx_params[] = {
 	{"nxp,gpio-pin-interrupt", PIN_CONFIG_GPIO_PIN_INT, 0},
-- 
2.20.1

[PATCH AUTOSEL 4.9 95/99] pinctrl: zynq: Use define directive for PIN_CONFIG_IO_STANDARD

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit cd8a145a066a1a3beb0ae615c7cb2ee4217418d7 ]

Clang warns when one enumerated type is implicitly converted to another:

drivers/pinctrl/pinctrl-zynq.c:985:18: warning: implicit conversion from
enumeration type 'enum zynq_pin_config_param' to different enumeration
type 'enum pin_config_param' [-Wenum-conversion]
        {"io-standard", PIN_CONFIG_IOSTANDARD, zynq_iostd_lvcmos18},
        ~               ^~~~~~~~~~~~~~~~~~~~~
drivers/pinctrl/pinctrl-zynq.c:990:16: warning: implicit conversion from
enumeration type 'enum zynq_pin_config_param' to different enumeration
type 'enum pin_config_param' [-Wenum-conversion]
        = { PCONFDUMP(PIN_CONFIG_IOSTANDARD, "IO-standard", NULL, true),
            ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from
macro 'PCONFDUMP'
        .param = a, .display = b, .format = c, .has_arg = d     \
                 ^
2 warnings generated.

It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-zynq.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-zynq.c b/drivers/pinctrl/pinctrl-zynq.c
index e0ecffcbe11f6..f8b54cfc90c7d 100644
--- a/drivers/pinctrl/pinctrl-zynq.c
+++ b/drivers/pinctrl/pinctrl-zynq.c
@@ -967,15 +967,12 @@ enum zynq_io_standards {
 	zynq_iostd_max
 };
 
-/**
- * enum zynq_pin_config_param - possible pin configuration parameters
- * @PIN_CONFIG_IOSTANDARD: if the pin can select an IO standard, the argument to
+/*
+ * PIN_CONFIG_IOSTANDARD: if the pin can select an IO standard, the argument to
  *	this parameter (on a custom format) tells the driver which alternative
  *	IO standard to use.
  */
-enum zynq_pin_config_param {
-	PIN_CONFIG_IOSTANDARD = PIN_CONFIG_END + 1,
-};
+#define PIN_CONFIG_IOSTANDARD		(PIN_CONFIG_END + 1)
 
 static const struct pinconf_generic_params zynq_dt_params[] = {
 	{"io-standard", PIN_CONFIG_IOSTANDARD, zynq_iostd_lvcmos18},
-- 
2.20.1

[PATCH AUTOSEL 4.9 96/99] PCI: keystone: Use quirk to limit MRRS for K2G

[Sasha Levin]

From: Kishon Vijay Abraham I <kishon@ti.com>

[ Upstream commit 148e340c0696369fadbbddc8f4bef801ed247d71 ]

PCI controller in K2G also has a limitation that memory read request
size (MRRS) must not exceed 256 bytes. Use the quirk to limit MRRS
(added for K2HK, K2L and K2E) for K2G as well.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/host/pci-keystone.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/pci/host/pci-keystone.c b/drivers/pci/host/pci-keystone.c
index eac0a1238e9d0..c690299d5c4a8 100644
--- a/drivers/pci/host/pci-keystone.c
+++ b/drivers/pci/host/pci-keystone.c
@@ -43,6 +43,7 @@
 #define PCIE_RC_K2HK		0xb008
 #define PCIE_RC_K2E		0xb009
 #define PCIE_RC_K2L		0xb00a
+#define PCIE_RC_K2G		0xb00b
 
 #define to_keystone_pcie(x)	container_of(x, struct keystone_pcie, pp)
 
@@ -57,6 +58,8 @@ static void quirk_limit_mrrs(struct pci_dev *dev)
 		 .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
 		{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCIE_RC_K2L),
 		 .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
+		{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCIE_RC_K2G),
+		 .class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
 		{ 0, },
 	};
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 97/99] spi: omap2-mcspi: Fix DMA and FIFO event trigger size mismatch

[Sasha Levin]

From: Vignesh R <vigneshr@ti.com>

[ Upstream commit baf8b9f8d260c55a86405f70a384c29cda888476 ]

Commit b682cffa3ac6 ("spi: omap2-mcspi: Set FIFO DMA trigger level to word length")
broke SPI transfers where bits_per_word != 8. This is because of
mimsatch between McSPI FIFO level event trigger size (SPI word length) and
DMA request size(word length * maxburst). This leads to data
corruption, lockup and errors like:

	spi1.0: EOW timed out

Fix this by setting DMA maxburst size to 1 so that
McSPI FIFO level event trigger size matches DMA request size.

Fixes: b682cffa3ac6 ("spi: omap2-mcspi: Set FIFO DMA trigger level to word length")
Cc: stable@vger.kernel.org
Reported-by: David Lechner <david@lechnology.com>
Tested-by: David Lechner <david@lechnology.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-omap2-mcspi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index bc136fe3a2829..ccb6f98550da4 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -625,8 +625,8 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
 	cfg.dst_addr = cs->phys + OMAP2_MCSPI_TX0;
 	cfg.src_addr_width = width;
 	cfg.dst_addr_width = width;
-	cfg.src_maxburst = es;
-	cfg.dst_maxburst = es;
+	cfg.src_maxburst = 1;
+	cfg.dst_maxburst = 1;
 
 	rx = xfer->rx_buf;
 	tx = xfer->tx_buf;
-- 
2.20.1

[PATCH AUTOSEL 4.9 98/99] mm/memory_hotplug: Do not unlock when fails to take the device_hotplug_lock

[Sasha Levin]

From: zhong jiang <zhongjiang@huawei.com>

[ Upstream commit d2ab99403ee00d8014e651728a4702ea1ae5e52c ]

When adding the memory by probing memory block in sysfs interface, there is an
obvious issue that we will unlock the device_hotplug_lock when fails to takes it.

That issue was introduced in Commit 8df1d0e4a265
("mm/memory_hotplug: make add_memory() take the device_hotplug_lock")

We should drop out in time when fails to take the device_hotplug_lock.

Fixes: 8df1d0e4a265 ("mm/memory_hotplug: make add_memory() take the device_hotplug_lock")
Reported-by: Yang yingliang <yangyingliang@huawei.com>
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/memory.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index 9f96f1b43c15f..6a3694a4843f8 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -502,7 +502,7 @@ memory_probe_store(struct device *dev, struct device_attribute *attr,
 
 	ret = lock_device_hotplug_sysfs();
 	if (ret)
-		goto out;
+		return ret;
 
 	nid = memory_add_physaddr_to_nid(phys_addr);
 	ret = __add_memory(nid, phys_addr,
-- 
2.20.1

[PATCH AUTOSEL 4.9 99/99] ipv6: Fix handling of LLA with VRF and sockets bound to VRF

[Sasha Levin]

From: David Ahern <dsahern@gmail.com>

[ Upstream commit c2027d1e17582903e368abf5d4838b22a98f2b7b ]

A recent commit allows sockets bound to a VRF to receive ipv6 link local
packets. However, it only works for UDP and worse TCP connection attempts
to the LLA with the only listener bound to the VRF just hang where as
before the client gets a reset and connection refused. Fix by adjusting
ir_iif for LL addresses and packets received through a device enslaved
to a VRF.

Fixes: 6f12fa775530 ("vrf: mark skb for multicast or link-local as enslaved to VRF")
Reported-by: Donald Sharp <sharpd@cumulusnetworks.com>
Cc: Mike Manning <mmanning@vyatta.att-mail.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/tcp_ipv6.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 4953466cf98f0..54e2557335c1c 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -693,6 +693,7 @@ static void tcp_v6_init_req(struct request_sock *req,
 			    const struct sock *sk_listener,
 			    struct sk_buff *skb)
 {
+	bool l3_slave = ipv6_l3mdev_skb(TCP_SKB_CB(skb)->header.h6.flags);
 	struct inet_request_sock *ireq = inet_rsk(req);
 	const struct ipv6_pinfo *np = inet6_sk(sk_listener);
 
@@ -700,7 +701,7 @@ static void tcp_v6_init_req(struct request_sock *req,
 	ireq->ir_v6_loc_addr = ipv6_hdr(skb)->daddr;
 
 	/* So that link locals have meaning */
-	if (!sk_listener->sk_bound_dev_if &&
+	if ((!sk_listener->sk_bound_dev_if || l3_slave) &&
 	    ipv6_addr_type(&ireq->ir_v6_rmt_addr) & IPV6_ADDR_LINKLOCAL)
 		ireq->ir_iif = tcp_v6_iif(skb);
 
-- 
2.20.1

Re: [PATCH AUTOSEL 4.9 89/99] vrf: mark skb for multicast or link-local as enslaved to VRF

[David Ahern]

On 11/16/19 8:50 AM, Sasha Levin wrote:
> From: Mike Manning <mmanning@vyatta.att-mail.com>
> 
> [ Upstream commit 6f12fa775530195a501fb090d092c637f32d0cc5 ]
> 
> The skb for packets that are multicast or to a link-local address are
> not marked as being enslaved to a VRF, if they are received on a socket
> bound to the VRF. This is needed for ND and it is preferable for the
> kernel not to have to deal with the additional use-cases if ll or mcast
> packets are handled as enslaved. However, this does not allow service
> instances listening on unbound and bound to VRF sockets to distinguish
> the VRF used, if packets are sent as multicast or to a link-local
> address. The fix is for the VRF driver to also mark these skb as being
> enslaved to the VRF.
> 
> Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
> Reviewed-by: David Ahern <dsahern@gmail.com>
> Tested-by: David Ahern <dsahern@gmail.com>
> Signed-off-by: David S. Miller <davem@davemloft.net>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/net/vrf.c | 19 +++++++++----------
>  1 file changed, 9 insertions(+), 10 deletions(-)
> 

backporting this patch and it's bug fix, "ipv6: Fix handling of LLA with
VRF and sockets bound to VRF" to 4.14 is a bit questionable. They
definitely do not need to come back to 4.9.

Re: [PATCH AUTOSEL 4.9 89/99] vrf: mark skb for multicast or link-local as enslaved to VRF

[Sasha Levin]

On Sun, Nov 17, 2019 at 09:44:38AM -0700, David Ahern wrote:
>On 11/16/19 8:50 AM, Sasha Levin wrote:
>> From: Mike Manning <mmanning@vyatta.att-mail.com>
>>
>> [ Upstream commit 6f12fa775530195a501fb090d092c637f32d0cc5 ]
>>
>> The skb for packets that are multicast or to a link-local address are
>> not marked as being enslaved to a VRF, if they are received on a socket
>> bound to the VRF. This is needed for ND and it is preferable for the
>> kernel not to have to deal with the additional use-cases if ll or mcast
>> packets are handled as enslaved. However, this does not allow service
>> instances listening on unbound and bound to VRF sockets to distinguish
>> the VRF used, if packets are sent as multicast or to a link-local
>> address. The fix is for the VRF driver to also mark these skb as being
>> enslaved to the VRF.
>>
>> Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
>> Reviewed-by: David Ahern <dsahern@gmail.com>
>> Tested-by: David Ahern <dsahern@gmail.com>
>> Signed-off-by: David S. Miller <davem@davemloft.net>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>> ---
>>  drivers/net/vrf.c | 19 +++++++++----------
>>  1 file changed, 9 insertions(+), 10 deletions(-)
>>
>
>backporting this patch and it's bug fix, "ipv6: Fix handling of LLA with
>VRF and sockets bound to VRF" to 4.14 is a bit questionable. They
>definitely do not need to come back to 4.9.

I'll drop it, thanks.

-- 
Thanks,
Sasha