[stable 4.19+][PATCH 01/20] i2c: stm32f7: fix first byte to send in slave mode

[stable 4.19+][PATCH 01/20] i2c: stm32f7: fix first byte to send in slave mode

[Mathieu Poirier]

From: Fabrice Gasnier <fabrice.gasnier@st.com>

commit 915da2b794ce4fc98b1acf64d64354f22a5e4931 upstream

The slave-interface documentation [1] states "the bus driver should
transmit the first byte" upon I2C_SLAVE_READ_REQUESTED slave event:
- 'val': backend returns first byte to be sent
The driver currently ignores the 1st byte to send on this event.

[1] https://www.kernel.org/doc/Documentation/i2c/slave-interface

Fixes: 60d609f30de2 ("i2c: i2c-stm32f7: Add slave support")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 drivers/i2c/busses/i2c-stm32f7.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index ac9c9486b834..48521bc8a4d2 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -1177,6 +1177,8 @@ static void stm32f7_i2c_slave_start(struct stm32f7_i2c_dev *i2c_dev)
 			STM32F7_I2C_CR1_TXIE;
 		stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, mask);
 
+		/* Write 1st data byte */
+		writel_relaxed(value, base + STM32F7_I2C_TXDR);
 	} else {
 		/* Notify i2c slave that new write transfer is starting */
 		i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
-- 
2.17.1

[stable 4.19+][PATCH 02/20] ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157

[Mathieu Poirier]

From: Patrice Chotard <patrice.chotard@st.com>

commit 86ec2e1739aa1d6565888b4b2059fa47354e1a89 upstream

Relax qspi pins slew-rate to minimize peak currents.

Fixes: 844030057339 ("ARM: dts: stm32: add flash nor support on stm32mp157c eval board")

Link: https://lore.kernel.org/r/20191025130122.11407-1-alexandre.torgue@st.com
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index c4851271e810..d9dce0c804e1 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -290,13 +290,13 @@
 						 <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
 					bias-disable;
 					drive-push-pull;
-					slew-rate = <3>;
+					slew-rate = <1>;
 				};
 				pins2 {
 					pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
 					bias-pull-up;
 					drive-push-pull;
-					slew-rate = <3>;
+					slew-rate = <1>;
 				};
 			};
 
@@ -308,13 +308,13 @@
 						 <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
 					bias-disable;
 					drive-push-pull;
-					slew-rate = <3>;
+					slew-rate = <1>;
 				};
 				pins2 {
 					pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
 					bias-pull-up;
 					drive-push-pull;
-					slew-rate = <3>;
+					slew-rate = <1>;
 				};
 			};
 
-- 
2.17.1

[stable 4.19+][PATCH 03/20] mailbox: stm32_ipcc: add spinlock to fix channels concurrent access

[Mathieu Poirier]

From: Arnaud Pouliquen <arnaud.pouliquen@st.com>

commit dba9a3dfe912dc47c9dbc9ba1f5f65adbf9aea0f upstream

Add spinlock protection on IPCC register update to avoid race condition.
Without this fix, stm32_ipcc_set_bits and stm32_ipcc_clr_bits can be
called in parallel for different channels. This results in register
corruptions.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Cc: stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 drivers/mailbox/stm32-ipcc.c | 37 ++++++++++++++++++++++++++----------
 1 file changed, 27 insertions(+), 10 deletions(-)

diff --git a/drivers/mailbox/stm32-ipcc.c b/drivers/mailbox/stm32-ipcc.c
index ca1f993c0de3..e31322225e93 100644
--- a/drivers/mailbox/stm32-ipcc.c
+++ b/drivers/mailbox/stm32-ipcc.c
@@ -50,6 +50,7 @@ struct stm32_ipcc {
 	void __iomem *reg_base;
 	void __iomem *reg_proc;
 	struct clk *clk;
+	spinlock_t lock; /* protect access to IPCC registers */
 	int irqs[IPCC_IRQ_NUM];
 	int wkp;
 	u32 proc_id;
@@ -58,14 +59,24 @@ struct stm32_ipcc {
 	u32 xmr;
 };
 
-static inline void stm32_ipcc_set_bits(void __iomem *reg, u32 mask)
+static inline void stm32_ipcc_set_bits(spinlock_t *lock, void __iomem *reg,
+				       u32 mask)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(lock, flags);
 	writel_relaxed(readl_relaxed(reg) | mask, reg);
+	spin_unlock_irqrestore(lock, flags);
 }
 
-static inline void stm32_ipcc_clr_bits(void __iomem *reg, u32 mask)
+static inline void stm32_ipcc_clr_bits(spinlock_t *lock, void __iomem *reg,
+				       u32 mask)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(lock, flags);
 	writel_relaxed(readl_relaxed(reg) & ~mask, reg);
+	spin_unlock_irqrestore(lock, flags);
 }
 
 static irqreturn_t stm32_ipcc_rx_irq(int irq, void *data)
@@ -92,7 +103,7 @@ static irqreturn_t stm32_ipcc_rx_irq(int irq, void *data)
 
 		mbox_chan_received_data(&ipcc->controller.chans[chan], NULL);
 
-		stm32_ipcc_set_bits(ipcc->reg_proc + IPCC_XSCR,
+		stm32_ipcc_set_bits(&ipcc->lock, ipcc->reg_proc + IPCC_XSCR,
 				    RX_BIT_CHAN(chan));
 
 		ret = IRQ_HANDLED;
@@ -121,7 +132,7 @@ static irqreturn_t stm32_ipcc_tx_irq(int irq, void *data)
 		dev_dbg(dev, "%s: chan:%d tx\n", __func__, chan);
 
 		/* mask 'tx channel free' interrupt */
-		stm32_ipcc_set_bits(ipcc->reg_proc + IPCC_XMR,
+		stm32_ipcc_set_bits(&ipcc->lock, ipcc->reg_proc + IPCC_XMR,
 				    TX_BIT_CHAN(chan));
 
 		mbox_chan_txdone(&ipcc->controller.chans[chan], 0);
@@ -141,10 +152,12 @@ static int stm32_ipcc_send_data(struct mbox_chan *link, void *data)
 	dev_dbg(ipcc->controller.dev, "%s: chan:%d\n", __func__, chan);
 
 	/* set channel n occupied */
-	stm32_ipcc_set_bits(ipcc->reg_proc + IPCC_XSCR, TX_BIT_CHAN(chan));
+	stm32_ipcc_set_bits(&ipcc->lock, ipcc->reg_proc + IPCC_XSCR,
+			    TX_BIT_CHAN(chan));
 
 	/* unmask 'tx channel free' interrupt */
-	stm32_ipcc_clr_bits(ipcc->reg_proc + IPCC_XMR, TX_BIT_CHAN(chan));
+	stm32_ipcc_clr_bits(&ipcc->lock, ipcc->reg_proc + IPCC_XMR,
+			    TX_BIT_CHAN(chan));
 
 	return 0;
 }
@@ -163,7 +176,8 @@ static int stm32_ipcc_startup(struct mbox_chan *link)
 	}
 
 	/* unmask 'rx channel occupied' interrupt */
-	stm32_ipcc_clr_bits(ipcc->reg_proc + IPCC_XMR, RX_BIT_CHAN(chan));
+	stm32_ipcc_clr_bits(&ipcc->lock, ipcc->reg_proc + IPCC_XMR,
+			    RX_BIT_CHAN(chan));
 
 	return 0;
 }
@@ -175,7 +189,7 @@ static void stm32_ipcc_shutdown(struct mbox_chan *link)
 					       controller);
 
 	/* mask rx/tx interrupt */
-	stm32_ipcc_set_bits(ipcc->reg_proc + IPCC_XMR,
+	stm32_ipcc_set_bits(&ipcc->lock, ipcc->reg_proc + IPCC_XMR,
 			    RX_BIT_CHAN(chan) | TX_BIT_CHAN(chan));
 
 	clk_disable_unprepare(ipcc->clk);
@@ -208,6 +222,8 @@ static int stm32_ipcc_probe(struct platform_device *pdev)
 	if (!ipcc)
 		return -ENOMEM;
 
+	spin_lock_init(&ipcc->lock);
+
 	/* proc_id */
 	if (of_property_read_u32(np, "st,proc-id", &ipcc->proc_id)) {
 		dev_err(dev, "Missing st,proc-id\n");
@@ -259,9 +275,10 @@ static int stm32_ipcc_probe(struct platform_device *pdev)
 	}
 
 	/* mask and enable rx/tx irq */
-	stm32_ipcc_set_bits(ipcc->reg_proc + IPCC_XMR,
+	stm32_ipcc_set_bits(&ipcc->lock, ipcc->reg_proc + IPCC_XMR,
 			    RX_BIT_MASK | TX_BIT_MASK);
-	stm32_ipcc_set_bits(ipcc->reg_proc + IPCC_XCR, XCR_RXOIE | XCR_TXOIE);
+	stm32_ipcc_set_bits(&ipcc->lock, ipcc->reg_proc + IPCC_XCR,
+			    XCR_RXOIE | XCR_TXOIE);
 
 	/* wakeup */
 	if (of_property_read_bool(np, "wakeup-source")) {
-- 
2.17.1

[stable 4.19+][PATCH 04/20] crypto: stm31/hash - Fix hmac issue more than 256 bytes

[Mathieu Poirier]

From: Lionel Debieve <lionel.debieve@st.com>

commit 0acabecebc912b3ba06289e4ef40476acc499a37 upstream

Correct condition for the second hmac loop. Key must be only
set in the first loop. Initial condition was wrong,
HMAC_KEY flag was not properly checked.

Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 drivers/crypto/stm32/stm32-hash.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/crypto/stm32/stm32-hash.c b/drivers/crypto/stm32/stm32-hash.c
index 590d7352837e..641b11077f47 100644
--- a/drivers/crypto/stm32/stm32-hash.c
+++ b/drivers/crypto/stm32/stm32-hash.c
@@ -365,7 +365,7 @@ static int stm32_hash_xmit_cpu(struct stm32_hash_dev *hdev,
 		return -ETIMEDOUT;
 
 	if ((hdev->flags & HASH_FLAGS_HMAC) &&
-	    (hdev->flags & ~HASH_FLAGS_HMAC_KEY)) {
+	    (!(hdev->flags & HASH_FLAGS_HMAC_KEY))) {
 		hdev->flags |= HASH_FLAGS_HMAC_KEY;
 		stm32_hash_write_key(hdev);
 		if (stm32_hash_wait_busy(hdev))
-- 
2.17.1

[stable 4.19+][PATCH 05/20] media: stm32-dcmi: fix DMA corruption when stopping streaming

[Mathieu Poirier]

From: Hugues Fruchet <hugues.fruchet@st.com>

commit b3ce6f6ff3c260ee53b0f2236e5fd950d46957da upstream

Avoid call of dmaengine_terminate_all() between
dmaengine_prep_slave_single() and dmaengine_submit() by locking
the whole DMA submission sequence.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 drivers/media/platform/stm32/stm32-dcmi.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index 1d9c028e52cb..d86944109cbf 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -164,6 +164,9 @@ struct stm32_dcmi {
 	int				errors_count;
 	int				overrun_count;
 	int				buffers_count;
+
+	/* Ensure DMA operations atomicity */
+	struct mutex			dma_lock;
 };
 
 static inline struct stm32_dcmi *notifier_to_dcmi(struct v4l2_async_notifier *n)
@@ -314,6 +317,13 @@ static int dcmi_start_dma(struct stm32_dcmi *dcmi,
 		return ret;
 	}
 
+	/*
+	 * Avoid call of dmaengine_terminate_all() between
+	 * dmaengine_prep_slave_single() and dmaengine_submit()
+	 * by locking the whole DMA submission sequence
+	 */
+	mutex_lock(&dcmi->dma_lock);
+
 	/* Prepare a DMA transaction */
 	desc = dmaengine_prep_slave_single(dcmi->dma_chan, buf->paddr,
 					   buf->size,
@@ -322,6 +332,7 @@ static int dcmi_start_dma(struct stm32_dcmi *dcmi,
 	if (!desc) {
 		dev_err(dcmi->dev, "%s: DMA dmaengine_prep_slave_single failed for buffer phy=%pad size=%zu\n",
 			__func__, &buf->paddr, buf->size);
+		mutex_unlock(&dcmi->dma_lock);
 		return -EINVAL;
 	}
 
@@ -333,9 +344,12 @@ static int dcmi_start_dma(struct stm32_dcmi *dcmi,
 	dcmi->dma_cookie = dmaengine_submit(desc);
 	if (dma_submit_error(dcmi->dma_cookie)) {
 		dev_err(dcmi->dev, "%s: DMA submission failed\n", __func__);
+		mutex_unlock(&dcmi->dma_lock);
 		return -ENXIO;
 	}
 
+	mutex_unlock(&dcmi->dma_lock);
+
 	dma_async_issue_pending(dcmi->dma_chan);
 
 	return 0;
@@ -717,7 +731,9 @@ static void dcmi_stop_streaming(struct vb2_queue *vq)
 	spin_unlock_irq(&dcmi->irqlock);
 
 	/* Stop all pending DMA operations */
+	mutex_lock(&dcmi->dma_lock);
 	dmaengine_terminate_all(dcmi->dma_chan);
+	mutex_unlock(&dcmi->dma_lock);
 
 	pm_runtime_put(dcmi->dev);
 
@@ -1719,6 +1735,7 @@ static int dcmi_probe(struct platform_device *pdev)
 
 	spin_lock_init(&dcmi->irqlock);
 	mutex_init(&dcmi->lock);
+	mutex_init(&dcmi->dma_lock);
 	init_completion(&dcmi->complete);
 	INIT_LIST_HEAD(&dcmi->buffers);
 
-- 
2.17.1

[stable 4.19+][PATCH 06/20] media: stm32-dcmi: fix check of pm_runtime_get_sync return value

[Mathieu Poirier]

From: Hugues Fruchet <hugues.fruchet@st.com>

commit ab41b99e7e55c85f29ff7b54718ccbbe051905e7 upstream

Start streaming was sometimes failing because of pm_runtime_get_sync()
non-0 return value. In fact return value was not an error but a
positive value (1), indicating that PM was already enabled.
Fix this by going to error path only with negative return value.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 drivers/media/platform/stm32/stm32-dcmi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index d86944109cbf..18d0b5641789 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -584,9 +584,9 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 	int ret;
 
 	ret = pm_runtime_get_sync(dcmi->dev);
-	if (ret) {
-		dev_err(dcmi->dev, "%s: Failed to start streaming, cannot get sync\n",
-			__func__);
+	if (ret < 0) {
+		dev_err(dcmi->dev, "%s: Failed to start streaming, cannot get sync (%d)\n",
+			__func__, ret);
 		goto err_release_buffers;
 	}
 
-- 
2.17.1

[stable 4.19+][PATCH 07/20] hwrng: stm32 - fix unbalanced pm_runtime_enable

[Mathieu Poirier]

From: Lionel Debieve <lionel.debieve@st.com>

commit af0d4442dd6813de6e77309063beb064fa8e89ae upstream

No remove function implemented yet in the driver.
Without remove function, the pm_runtime implementation
complains when removing and probing again the driver.

Signed-off-by: Lionel Debieve <lionel.debieve@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 drivers/char/hw_random/stm32-rng.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/char/hw_random/stm32-rng.c b/drivers/char/hw_random/stm32-rng.c
index 042860d97b15..37b338a76ba4 100644
--- a/drivers/char/hw_random/stm32-rng.c
+++ b/drivers/char/hw_random/stm32-rng.c
@@ -169,6 +169,13 @@ static int stm32_rng_probe(struct platform_device *ofdev)
 	return devm_hwrng_register(dev, &priv->rng);
 }
 
+static int stm32_rng_remove(struct platform_device *ofdev)
+{
+	pm_runtime_disable(&ofdev->dev);
+
+	return 0;
+}
+
 #ifdef CONFIG_PM
 static int stm32_rng_runtime_suspend(struct device *dev)
 {
@@ -210,6 +217,7 @@ static struct platform_driver stm32_rng_driver = {
 		.of_match_table = stm32_rng_match,
 	},
 	.probe = stm32_rng_probe,
+	.remove = stm32_rng_remove,
 };
 
 module_platform_driver(stm32_rng_driver);
-- 
2.17.1

[stable 4.19+][PATCH 08/20] remoteproc: fix rproc_da_to_va in case of unallocated carveout

[Mathieu Poirier]

From: Loic Pallardy <loic.pallardy@st.com>

commit 74457c40f97a98142bb13153395d304ad3c85cdd upstream

With introduction of rproc_alloc_registered_carveouts() which
delays carveout allocation just before the start of the remote
processor, rproc_da_to_va() could be called before all carveouts
are allocated.
This patch adds a check in rproc_da_to_va() to return NULL if
carveout is not allocated.

Fixes: d7c51706d095 ("remoteproc: add alloc ops in rproc_mem_entry struct")

Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 drivers/remoteproc/remoteproc_core.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index aa6206706fe3..af9d443e7796 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -183,6 +183,10 @@ void *rproc_da_to_va(struct rproc *rproc, u64 da, int len)
 	list_for_each_entry(carveout, &rproc->carveouts, node) {
 		int offset = da - carveout->da;
 
+		/*  Verify that carveout is allocated */
+		if (!carveout->va)
+			continue;
+
 		/* try next carveout if da is too small */
 		if (offset < 0)
 			continue;
-- 
2.17.1

[stable 4.19+][PATCH 09/20] clk: stm32mp1: fix HSI divider flag

[Mathieu Poirier]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

commit d3f2e33c875de5052e032a9eefa64c897a930ed1 upstream

The divider of HSI (clk-hsi-div) is power of two divider.

Fixes: 9bee94e7b7da ("clk: stm32mp1: Introduce STM32MP1 clock driver")
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Cc: stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 drivers/clk/clk-stm32mp1.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/clk-stm32mp1.c b/drivers/clk/clk-stm32mp1.c
index a907555b2a3d..d602ae72eb81 100644
--- a/drivers/clk/clk-stm32mp1.c
+++ b/drivers/clk/clk-stm32mp1.c
@@ -1655,8 +1655,8 @@ static const struct stm32_mux_cfg ker_mux_cfg[M_LAST] = {
 
 static const struct clock_config stm32mp1_clock_cfg[] = {
 	/* Oscillator divider */
-	DIV(NO_ID, "clk-hsi-div", "clk-hsi", 0, RCC_HSICFGR, 0, 2,
-	    CLK_DIVIDER_READ_ONLY),
+	DIV(NO_ID, "clk-hsi-div", "clk-hsi", CLK_DIVIDER_POWER_OF_TWO,
+	    RCC_HSICFGR, 0, 2, CLK_DIVIDER_READ_ONLY),
 
 	/*  External / Internal Oscillators */
 	GATE_MP1(CK_HSE, "ck_hse", "clk-hse", 0, RCC_OCENSETR, 8, 0),
-- 
2.17.1

[stable 4.19+][PATCH 10/20] clk: stm32mp1: fix mcu divider table

[Mathieu Poirier]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

commit 140fc4e406fac420b978a0ef2ee1fe3c641a6ae4 upstream

index 8: ck_mcu is divided by 256 (not 512)

Fixes: e51d297e9a92 ("clk: stm32mp1: add Sub System clocks")
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Cc: stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 drivers/clk/clk-stm32mp1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/clk-stm32mp1.c b/drivers/clk/clk-stm32mp1.c
index d602ae72eb81..851fb4e9ac44 100644
--- a/drivers/clk/clk-stm32mp1.c
+++ b/drivers/clk/clk-stm32mp1.c
@@ -269,7 +269,7 @@ static const struct clk_div_table axi_div_table[] = {
 static const struct clk_div_table mcu_div_table[] = {
 	{ 0, 1 }, { 1, 2 }, { 2, 4 }, { 3, 8 },
 	{ 4, 16 }, { 5, 32 }, { 6, 64 }, { 7, 128 },
-	{ 8, 512 }, { 9, 512 }, { 10, 512}, { 11, 512 },
+	{ 8, 256 }, { 9, 512 }, { 10, 512}, { 11, 512 },
 	{ 12, 512 }, { 13, 512 }, { 14, 512}, { 15, 512 },
 	{ 0 },
 };
-- 
2.17.1

[stable 4.19+][PATCH 11/20] clk: stm32mp1: add CLK_SET_RATE_NO_REPARENT to Kernel clocks

[Mathieu Poirier]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

commit 72cfd1ad1057f16fc614861b3c271597995e57ba upstream

STM32MP1 clock IP offers lots of Kernel clocks that are shared
by multiple IP's at the same time.
Then boot loader applies a clock tree that allows to use all IP's
at same time and with the maximum of performance.
Not change parents on a change rate on kernel clocks ensures
the integrity of the system.

Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Cc: stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 drivers/clk/clk-stm32mp1.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/clk-stm32mp1.c b/drivers/clk/clk-stm32mp1.c
index 851fb4e9ac44..8e25ed62f67b 100644
--- a/drivers/clk/clk-stm32mp1.c
+++ b/drivers/clk/clk-stm32mp1.c
@@ -1286,10 +1286,11 @@ _clk_stm32_register_composite(struct device *dev,
 	MGATE_MP1(_id, _name, _parent, _flags, _mgate)
 
 #define KCLK(_id, _name, _parents, _flags, _mgate, _mmux)\
-	     COMPOSITE(_id, _name, _parents, CLK_OPS_PARENT_ENABLE | _flags,\
-		  _MGATE_MP1(_mgate),\
-		  _MMUX(_mmux),\
-		  _NO_DIV)
+	     COMPOSITE(_id, _name, _parents, CLK_OPS_PARENT_ENABLE |\
+		       CLK_SET_RATE_NO_REPARENT | _flags,\
+		       _MGATE_MP1(_mgate),\
+		       _MMUX(_mmux),\
+		       _NO_DIV)
 
 enum {
 	G_SAI1,
@@ -1952,7 +1953,8 @@ static const struct clock_config stm32mp1_clock_cfg[] = {
 	MGATE_MP1(GPU_K, "gpu_k", "pll2_q", 0, G_GPU),
 	MGATE_MP1(DAC12_K, "dac12_k", "ck_lsi", 0, G_DAC12),
 
-	COMPOSITE(ETHPTP_K, "ethptp_k", eth_src, CLK_OPS_PARENT_ENABLE,
+	COMPOSITE(ETHPTP_K, "ethptp_k", eth_src, CLK_OPS_PARENT_ENABLE |
+		  CLK_SET_RATE_NO_REPARENT,
 		  _NO_GATE,
 		  _MMUX(M_ETHCK),
 		  _DIV(RCC_ETHCKSELR, 4, 4, CLK_DIVIDER_ALLOW_ZERO, NULL)),
-- 
2.17.1

[stable 4.19+][PATCH 12/20] clk: stm32mp1: parent clocks update

[Mathieu Poirier]

From: Gabriel Fernandez <gabriel.fernandez@st.com>

commit 749c9e553e1f063eb132a78d80225532cbfedb80 upstream

Fixes parent clock for axi, fdcan, sai and adc12 clocks.

Fixes: e51d297e9a92 ("clk: stm32mp1: add Sub System clocks")
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Cc: stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 drivers/clk/clk-stm32mp1.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/clk-stm32mp1.c b/drivers/clk/clk-stm32mp1.c
index 8e25ed62f67b..bf3b6a4c78d0 100644
--- a/drivers/clk/clk-stm32mp1.c
+++ b/drivers/clk/clk-stm32mp1.c
@@ -121,7 +121,7 @@ static const char * const cpu_src[] = {
 };
 
 static const char * const axi_src[] = {
-	"ck_hsi", "ck_hse", "pll2_p", "pll3_p"
+	"ck_hsi", "ck_hse", "pll2_p"
 };
 
 static const char * const per_src[] = {
@@ -225,19 +225,19 @@ static const char * const usart6_src[] = {
 };
 
 static const char * const fdcan_src[] = {
-	"ck_hse", "pll3_q", "pll4_q"
+	"ck_hse", "pll3_q", "pll4_q", "pll4_r"
 };
 
 static const char * const sai_src[] = {
-	"pll4_q", "pll3_q", "i2s_ckin", "ck_per"
+	"pll4_q", "pll3_q", "i2s_ckin", "ck_per", "pll3_r"
 };
 
 static const char * const sai2_src[] = {
-	"pll4_q", "pll3_q", "i2s_ckin", "ck_per", "spdif_ck_symb"
+	"pll4_q", "pll3_q", "i2s_ckin", "ck_per", "spdif_ck_symb", "pll3_r"
 };
 
 static const char * const adc12_src[] = {
-	"pll4_q", "ck_per"
+	"pll4_r", "ck_per", "pll3_q"
 };
 
 static const char * const dsi_src[] = {
-- 
2.17.1

[stable 4.19+][PATCH 13/20] mailbox: mailbox-test: fix null pointer if no mmio

[Mathieu Poirier]

From: Fabien Dessenne <fabien.dessenne@st.com>

commit 6899b4f7c99c72968e58e502f96084f74f6e5e86 upstream

Fix null pointer issue if resource_size is called with no ioresource.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Cc: stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 drivers/mailbox/mailbox-test.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/mailbox/mailbox-test.c b/drivers/mailbox/mailbox-test.c
index 58bfafc34bc4..129b3656c453 100644
--- a/drivers/mailbox/mailbox-test.c
+++ b/drivers/mailbox/mailbox-test.c
@@ -363,22 +363,24 @@ static int mbox_test_probe(struct platform_device *pdev)
 
 	/* It's okay for MMIO to be NULL */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	size = resource_size(res);
 	tdev->tx_mmio = devm_ioremap_resource(&pdev->dev, res);
-	if (PTR_ERR(tdev->tx_mmio) == -EBUSY)
+	if (PTR_ERR(tdev->tx_mmio) == -EBUSY) {
 		/* if reserved area in SRAM, try just ioremap */
+		size = resource_size(res);
 		tdev->tx_mmio = devm_ioremap(&pdev->dev, res->start, size);
-	else if (IS_ERR(tdev->tx_mmio))
+	} else if (IS_ERR(tdev->tx_mmio)) {
 		tdev->tx_mmio = NULL;
+	}
 
 	/* If specified, second reg entry is Rx MMIO */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	size = resource_size(res);
 	tdev->rx_mmio = devm_ioremap_resource(&pdev->dev, res);
-	if (PTR_ERR(tdev->rx_mmio) == -EBUSY)
+	if (PTR_ERR(tdev->rx_mmio) == -EBUSY) {
+		size = resource_size(res);
 		tdev->rx_mmio = devm_ioremap(&pdev->dev, res->start, size);
-	else if (IS_ERR(tdev->rx_mmio))
+	} else if (IS_ERR(tdev->rx_mmio)) {
 		tdev->rx_mmio = tdev->tx_mmio;
+	}
 
 	tdev->tx_channel = mbox_test_request_channel(pdev, "tx");
 	tdev->rx_channel = mbox_test_request_channel(pdev, "rx");
-- 
2.17.1

[stable 4.19+][PATCH 14/20] pinctrl: stm32: fix memory leak issue

[Mathieu Poirier]

From: Alexandre Torgue <alexandre.torgue@st.com>

commit cd8c9b5a49576bf28990237715bc2cb2210ac80a upstream

configs is allocated by pinconf_generic_parse_dt_config(),
pinctrl_utils_add_map_configs() duplicates configs so it can and has to
be freed to prevent memory leaks.

Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 drivers/pinctrl/stm32/pinctrl-stm32.c | 26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
index a9bec6e6fdd1..14dfbbd6c1c3 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -410,7 +410,7 @@ static int stm32_pctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 	unsigned int num_configs;
 	bool has_config = 0;
 	unsigned reserve = 0;
-	int num_pins, num_funcs, maps_per_pin, i, err;
+	int num_pins, num_funcs, maps_per_pin, i, err = 0;
 
 	pctl = pinctrl_dev_get_drvdata(pctldev);
 
@@ -437,41 +437,45 @@ static int stm32_pctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 	if (has_config && num_pins >= 1)
 		maps_per_pin++;
 
-	if (!num_pins || !maps_per_pin)
-		return -EINVAL;
+	if (!num_pins || !maps_per_pin) {
+		err = -EINVAL;
+		goto exit;
+	}
 
 	reserve = num_pins * maps_per_pin;
 
 	err = pinctrl_utils_reserve_map(pctldev, map,
 			reserved_maps, num_maps, reserve);
 	if (err)
-		return err;
+		goto exit;
 
 	for (i = 0; i < num_pins; i++) {
 		err = of_property_read_u32_index(node, "pinmux",
 				i, &pinfunc);
 		if (err)
-			return err;
+			goto exit;
 
 		pin = STM32_GET_PIN_NO(pinfunc);
 		func = STM32_GET_PIN_FUNC(pinfunc);
 
 		if (!stm32_pctrl_is_function_valid(pctl, pin, func)) {
 			dev_err(pctl->dev, "invalid function.\n");
-			return -EINVAL;
+			err = -EINVAL;
+			goto exit;
 		}
 
 		grp = stm32_pctrl_find_group_by_pin(pctl, pin);
 		if (!grp) {
 			dev_err(pctl->dev, "unable to match pin %d to group\n",
 					pin);
-			return -EINVAL;
+			err = -EINVAL;
+			goto exit;
 		}
 
 		err = stm32_pctrl_dt_node_to_map_func(pctl, pin, func, grp, map,
 				reserved_maps, num_maps);
 		if (err)
-			return err;
+			goto exit;
 
 		if (has_config) {
 			err = pinctrl_utils_add_map_configs(pctldev, map,
@@ -479,11 +483,13 @@ static int stm32_pctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 					configs, num_configs,
 					PIN_MAP_TYPE_CONFIGS_GROUP);
 			if (err)
-				return err;
+				goto exit;
 		}
 	}
 
-	return 0;
+exit:
+	kfree(configs);
+	return err;
 }
 
 static int stm32_pctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
-- 
2.17.1

[stable 4.19+][PATCH 15/20] ASoC: stm32: i2s: fix dma configuration

[Mathieu Poirier]

From: Olivier Moysan <olivier.moysan@st.com>

commit 1ac2bd16448997d9ec01922423486e1e85535eda upstream

DMA configuration is not balanced on start/stop.
Move DMA configuration to trigger callback.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 sound/soc/stm/stm32_i2s.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/sound/soc/stm/stm32_i2s.c b/sound/soc/stm/stm32_i2s.c
index 6d0bf78d114d..449bb7049a28 100644
--- a/sound/soc/stm/stm32_i2s.c
+++ b/sound/soc/stm/stm32_i2s.c
@@ -488,7 +488,7 @@ static int stm32_i2s_configure(struct snd_soc_dai *cpu_dai,
 {
 	struct stm32_i2s_data *i2s = snd_soc_dai_get_drvdata(cpu_dai);
 	int format = params_width(params);
-	u32 cfgr, cfgr_mask, cfg1, cfg1_mask;
+	u32 cfgr, cfgr_mask, cfg1;
 	unsigned int fthlv;
 	int ret;
 
@@ -529,15 +529,11 @@ static int stm32_i2s_configure(struct snd_soc_dai *cpu_dai,
 	if (ret < 0)
 		return ret;
 
-	cfg1 = I2S_CFG1_RXDMAEN | I2S_CFG1_TXDMAEN;
-	cfg1_mask = cfg1;
-
 	fthlv = STM32_I2S_FIFO_SIZE * I2S_FIFO_TH_ONE_QUARTER / 4;
-	cfg1 |= I2S_CFG1_FTHVL_SET(fthlv - 1);
-	cfg1_mask |= I2S_CFG1_FTHVL_MASK;
+	cfg1 = I2S_CFG1_FTHVL_SET(fthlv - 1);
 
 	return regmap_update_bits(i2s->regmap, STM32_I2S_CFG1_REG,
-				  cfg1_mask, cfg1);
+				  I2S_CFG1_FTHVL_MASK, cfg1);
 }
 
 static int stm32_i2s_startup(struct snd_pcm_substream *substream,
@@ -589,6 +585,10 @@ static int stm32_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
 		/* Enable i2s */
 		dev_dbg(cpu_dai->dev, "start I2S\n");
 
+		cfg1_mask = I2S_CFG1_RXDMAEN | I2S_CFG1_TXDMAEN;
+		regmap_update_bits(i2s->regmap, STM32_I2S_CFG1_REG,
+				   cfg1_mask, cfg1_mask);
+
 		ret = regmap_update_bits(i2s->regmap, STM32_I2S_CR1_REG,
 					 I2S_CR1_SPE, I2S_CR1_SPE);
 		if (ret < 0) {
-- 
2.17.1

[stable 4.19+][PATCH 16/20] ASoC: stm32: i2s: fix 16 bit format support

[Mathieu Poirier]

From: Olivier Moysan <olivier.moysan@st.com>

commit 0c4c68d6fa1bae74d450e50823c24fcc3cd0b171 upstream

I2S supports 16 bits data in 32 channel length.
However the expected driver behavior, is to
set channel length to 16 bits when data format is 16 bits.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 sound/soc/stm/stm32_i2s.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/stm/stm32_i2s.c b/sound/soc/stm/stm32_i2s.c
index 449bb7049a28..004d83091505 100644
--- a/sound/soc/stm/stm32_i2s.c
+++ b/sound/soc/stm/stm32_i2s.c
@@ -501,7 +501,7 @@ static int stm32_i2s_configure(struct snd_soc_dai *cpu_dai,
 	switch (format) {
 	case 16:
 		cfgr = I2S_CGFR_DATLEN_SET(I2S_I2SMOD_DATLEN_16);
-		cfgr_mask = I2S_CGFR_DATLEN_MASK;
+		cfgr_mask = I2S_CGFR_DATLEN_MASK | I2S_CGFR_CHLEN;
 		break;
 	case 32:
 		cfgr = I2S_CGFR_DATLEN_SET(I2S_I2SMOD_DATLEN_32) |
-- 
2.17.1

[stable 4.19+][PATCH 17/20] ASoC: stm32: i2s: fix IRQ clearing

[Mathieu Poirier]

From: Olivier Moysan <olivier.moysan@st.com>

commit 8ba3c5215d69c09f5c39783ff3b78347769822ad upstream

Because of regmap cache, interrupts may not be cleared
as expected.
Declare IFCR register as write only and make writings
to IFCR register unconditional.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 sound/soc/stm/stm32_i2s.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/sound/soc/stm/stm32_i2s.c b/sound/soc/stm/stm32_i2s.c
index 004d83091505..aa2b1196171a 100644
--- a/sound/soc/stm/stm32_i2s.c
+++ b/sound/soc/stm/stm32_i2s.c
@@ -246,8 +246,8 @@ static irqreturn_t stm32_i2s_isr(int irq, void *devid)
 		return IRQ_NONE;
 	}
 
-	regmap_update_bits(i2s->regmap, STM32_I2S_IFCR_REG,
-			   I2S_IFCR_MASK, flags);
+	regmap_write_bits(i2s->regmap, STM32_I2S_IFCR_REG,
+			  I2S_IFCR_MASK, flags);
 
 	if (flags & I2S_SR_OVR) {
 		dev_dbg(&pdev->dev, "Overrun\n");
@@ -276,7 +276,6 @@ static bool stm32_i2s_readable_reg(struct device *dev, unsigned int reg)
 	case STM32_I2S_CFG2_REG:
 	case STM32_I2S_IER_REG:
 	case STM32_I2S_SR_REG:
-	case STM32_I2S_IFCR_REG:
 	case STM32_I2S_TXDR_REG:
 	case STM32_I2S_RXDR_REG:
 	case STM32_I2S_CGFR_REG:
@@ -547,8 +546,8 @@ static int stm32_i2s_startup(struct snd_pcm_substream *substream,
 	i2s->refcount++;
 	spin_unlock(&i2s->lock_fd);
 
-	return regmap_update_bits(i2s->regmap, STM32_I2S_IFCR_REG,
-				  I2S_IFCR_MASK, I2S_IFCR_MASK);
+	return regmap_write_bits(i2s->regmap, STM32_I2S_IFCR_REG,
+				 I2S_IFCR_MASK, I2S_IFCR_MASK);
 }
 
 static int stm32_i2s_hw_params(struct snd_pcm_substream *substream,
@@ -603,8 +602,8 @@ static int stm32_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
 			return ret;
 		}
 
-		regmap_update_bits(i2s->regmap, STM32_I2S_IFCR_REG,
-				   I2S_IFCR_MASK, I2S_IFCR_MASK);
+		regmap_write_bits(i2s->regmap, STM32_I2S_IFCR_REG,
+				  I2S_IFCR_MASK, I2S_IFCR_MASK);
 
 		if (playback_flg) {
 			ier = I2S_IER_UDRIE;
-- 
2.17.1

[stable 4.19+][PATCH 18/20] ASoC: stm32: sai: add missing put_device()

[Mathieu Poirier]

From: Wen Yang <yellowriver2010@hotmail.com>

commit 1c3816a194870e7a6622345dab7fb56c7d708613 upstream

The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.

Fixes: 7dd0d835582f ("ASoC: stm32: sai: simplify sync modes management")
Signed-off-by: Wen Yang <yellowriver2010@hotmail.com>
Acked-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 sound/soc/stm/stm32_sai.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/sound/soc/stm/stm32_sai.c b/sound/soc/stm/stm32_sai.c
index f22654253c43..540c4a00405c 100644
--- a/sound/soc/stm/stm32_sai.c
+++ b/sound/soc/stm/stm32_sai.c
@@ -112,16 +112,21 @@ static int stm32_sai_set_sync(struct stm32_sai_data *sai_client,
 	if (!sai_provider) {
 		dev_err(&sai_client->pdev->dev,
 			"SAI sync provider data not found\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out_put_dev;
 	}
 
 	/* Configure sync client */
 	ret = stm32_sai_sync_conf_client(sai_client, synci);
 	if (ret < 0)
-		return ret;
+		goto out_put_dev;
 
 	/* Configure sync provider */
-	return stm32_sai_sync_conf_provider(sai_provider, synco);
+	ret = stm32_sai_sync_conf_provider(sai_provider, synco);
+
+out_put_dev:
+	put_device(&pdev->dev);
+	return ret;
 }
 
 static int stm32_sai_probe(struct platform_device *pdev)
-- 
2.17.1

[stable 4.19+][PATCH 19/20] media: ov5640: fix framerate update

[Mathieu Poirier]

From: Hugues Fruchet <hugues.fruchet@st.com>

commit 0929983e49c81c1d413702cd9b83bb06c4a2555c upstream

Changing framerate right before streamon had no effect,
the new framerate value was taken into account only at
next streamon, fix this.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 drivers/media/i2c/ov5640.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index a3bbef682fb8..2023df14f828 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -2572,8 +2572,6 @@ static int ov5640_s_frame_interval(struct v4l2_subdev *sd,
 	if (frame_rate < 0)
 		frame_rate = OV5640_15_FPS;
 
-	sensor->current_fr = frame_rate;
-	sensor->frame_interval = fi->interval;
 	mode = ov5640_find_mode(sensor, frame_rate, mode->hact,
 				mode->vact, true);
 	if (!mode) {
@@ -2581,7 +2579,10 @@ static int ov5640_s_frame_interval(struct v4l2_subdev *sd,
 		goto out;
 	}
 
-	if (mode != sensor->current_mode) {
+	if (mode != sensor->current_mode ||
+	    frame_rate != sensor->current_fr) {
+		sensor->current_fr = frame_rate;
+		sensor->frame_interval = fi->interval;
 		sensor->current_mode = mode;
 		sensor->pending_mode_change = true;
 	}
-- 
2.17.1

[stable 4.19+][PATCH 20/20] dmaengine: stm32-dma: check whether length is aligned on FIFO threshold

[Mathieu Poirier]

From: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>

commit cc832dc8e32785a730ba07c3a357e17c201a5df8 upstream

When a period length is not multiple of FIFO some data may be stuck
within FIFO.

Burst/FIFO Threshold/Period or buffer length check has to be hardened

In any case DMA will grant any request from client but will degraded
any parameters whether awkward.

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Cc: stable <stable@vger.kernel.org> # 4.19+
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 drivers/dma/stm32-dma.c | 20 ++++++--------------
 1 file changed, 6 insertions(+), 14 deletions(-)

diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
index 379e8d534e61..4903a408fc14 100644
--- a/drivers/dma/stm32-dma.c
+++ b/drivers/dma/stm32-dma.c
@@ -308,20 +308,12 @@ static bool stm32_dma_fifo_threshold_is_allowed(u32 burst, u32 threshold,
 
 static bool stm32_dma_is_burst_possible(u32 buf_len, u32 threshold)
 {
-	switch (threshold) {
-	case STM32_DMA_FIFO_THRESHOLD_FULL:
-		if (buf_len >= STM32_DMA_MAX_BURST)
-			return true;
-		else
-			return false;
-	case STM32_DMA_FIFO_THRESHOLD_HALFFULL:
-		if (buf_len >= STM32_DMA_MAX_BURST / 2)
-			return true;
-		else
-			return false;
-	default:
-		return false;
-	}
+	/*
+	 * Buffer or period length has to be aligned on FIFO depth.
+	 * Otherwise bytes may be stuck within FIFO at buffer or period
+	 * length.
+	 */
+	return ((buf_len % ((threshold + 1) * 4)) == 0);
 }
 
 static u32 stm32_dma_get_best_burst(u32 buf_len, u32 max_burst, u32 threshold,
-- 
2.17.1

Re: [stable 4.19+][PATCH 01/20] i2c: stm32f7: fix first byte to send in slave mode

[Greg KH]

On Fri, Nov 15, 2019 at 03:33:37PM -0700, Mathieu Poirier wrote:
> From: Fabrice Gasnier <fabrice.gasnier@st.com>
> 
> commit 915da2b794ce4fc98b1acf64d64354f22a5e4931 upstream

That commit is not in Linus's tree :(

I'll stop here.  Please check all of these and resend the whole thing.

Also, does this series also apply fully to 5.3.y?

thanks,

greg k-h

Re: [stable 4.19+][PATCH 01/20] i2c: stm32f7: fix first byte to send in slave mode

[Mathieu Poirier]

On Thu, 21 Nov 2019 at 13:35, Greg KH <gregkh@linuxfoundation.org> wrote:
>
> On Fri, Nov 15, 2019 at 03:33:37PM -0700, Mathieu Poirier wrote:
> > From: Fabrice Gasnier <fabrice.gasnier@st.com>
> >
> > commit 915da2b794ce4fc98b1acf64d64354f22a5e4931 upstream
>
> That commit is not in Linus's tree :(

:o(  Apologies for that - probably a copy/paste problem.

>
> I'll stop here.  Please check all of these and resend the whole thing.
>
> Also, does this series also apply fully to 5.3.y?

Normally it should have and that is what I assumed.  I just did a
quick test and I'm wrong - as you probably noticed since you're
pointing it out.  Forget the whole thing and I'll send another set (or
two).

>
> thanks,
>
> greg k-h