[PATCH v2 0/5] ls1028a: dts fixes and new board support

From: Michael Walle <michael@walle.cc>
To: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>,
	Yuantian Tang <andy.tang@nxp.com>,
	Michael Walle <michael@walle.cc>
Subject: [PATCH v2 0/5] ls1028a: dts fixes and new board support
Date: Tue, 10 Dec 2019 00:43:45 +0100	[thread overview]
Message-ID: <20191209234350.18994-1-michael@walle.cc> (raw)

This series adds basic support for the Kontron SMARC-sAL28 board. It also
adds missing nodes to the ls1028a base device tree which are used by the
board.

changes since v1:
 - dropped "arm64: dts: ls1028a: add FlexSPI node" in favor of:
   https://lore.kernel.org/lkml/1575457098-18368-2-git-send-email-Ashish.Kumar@nxp.com/
   Thus, this series now depends on that patch
 - better commit message for the TMU patch
 - added fixes tag to the TMU patch
 - document the LS1028A evaluation boards compatible strings
 - document the Kontron sl28 boards compatible strings
 - fix node names of the sl28 device tree(s)
 - removed device specific compatible string of the spi flash
 - rebased the patch series
 - integrate the RGMII configuration of the AR8031 PHY since the binding is
   now already upstream

This patchseries depends on:
 - [Patch v2 1/5] arm64: dts: ls1028a: Add FlexSPI support
   https://lore.kernel.org/lkml/1575457098-18368-2-git-send-email-Ashish.Kumar@nxp.com/
 - [PATCH v2 1/2] dt-bindings: clock: document the fsl-sai driver
   https://lore.kernel.org/lkml/20191209233305.18619-1-michael@walle.cc/

This patchseries superseeds:
 - [PATCH 0/4] ls1028a: dts fixes and new board support
   https://lore.kernel.org/lkml/20191123201317.25861-1-michael@walle.cc/
 - [PATCH] arm64: dts: sl28: configure the RGMII PHY
   https://lore.kernel.org/lkml/20191123202624.28093-1-michael@walle.cc/

Michael Walle (5):
  arm64: dts: ls1028a: fix typo in TMU calibration data
  arm64: dts: ls1028a: add missing sai nodes
  dt-bindings: arm: fsl: add LS1028A based boards
  dt-bindings: arm: fsl: add Kontron sl28 boards
  arm64: dts: freescale: add Kontron sl28 support

 .../devicetree/bindings/arm/fsl.yaml          |  45 +++++
 arch/arm64/boot/dts/freescale/Makefile        |   4 +
 .../fsl-ls1028a-kontron-kbox-a-230-ls.dts     |  27 +++
 .../fsl-ls1028a-kontron-sl28-var3-ads2.dts    | 106 +++++++++++
 .../fsl-ls1028a-kontron-sl28-var4.dts         |  50 +++++
 .../freescale/fsl-ls1028a-kontron-sl28.dts    | 174 ++++++++++++++++++
 .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi |  44 ++++-
 7 files changed, 449 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
 create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts

-- 
2.20.1