Re: [PATCH v2 0/5] ls1028a: dts fixes and new board support

From: Michael Walle <michael@walle.cc>
To: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>,
	Yuantian Tang <andy.tang@nxp.com>
Subject: Re: [PATCH v2 0/5] ls1028a: dts fixes and new board support
Date: Wed, 29 Jan 2020 17:22:07 +0100	[thread overview]
Message-ID: <d5a729321220f35bd0ea377a8ec2f852@walle.cc> (raw)
In-Reply-To: <20191209234350.18994-1-michael@walle.cc>

Hi Shawn,

Am 2019-12-10 00:43, schrieb Michael Walle:
> This series adds basic support for the Kontron SMARC-sAL28 board. It 
> also
> adds missing nodes to the ls1028a base device tree which are used by 
> the
> board.
> 
> changes since v1:
>  - dropped "arm64: dts: ls1028a: add FlexSPI node" in favor of:
> 
> https://lore.kernel.org/lkml/1575457098-18368-2-git-send-email-Ashish.Kumar@nxp.com/
>    Thus, this series now depends on that patch
>  - better commit message for the TMU patch
>  - added fixes tag to the TMU patch
>  - document the LS1028A evaluation boards compatible strings
>  - document the Kontron sl28 boards compatible strings
>  - fix node names of the sl28 device tree(s)
>  - removed device specific compatible string of the spi flash
>  - rebased the patch series
>  - integrate the RGMII configuration of the AR8031 PHY since the 
> binding is
>    now already upstream
> 
> This patchseries depends on:
>  - [Patch v2 1/5] arm64: dts: ls1028a: Add FlexSPI support
> 
> https://lore.kernel.org/lkml/1575457098-18368-2-git-send-email-Ashish.Kumar@nxp.com/
>  - [PATCH v2 1/2] dt-bindings: clock: document the fsl-sai driver
>    
> https://lore.kernel.org/lkml/20191209233305.18619-1-michael@walle.cc/

it seems that all the pieces are now together.

  - "arm64: dts: ls1028a: Add FlexSPI support" is pulled
  - you've already pulled the patches 1 and 2 from this series
  - Rob reviewed patch 3 and 4
  - your review remarks of patch 5 should be included
  - and last but not least, the clock driver used by the device tree 
finally
    made it into clk-next [1]

-michael

[1] 
https://lore.kernel.org/linux-clk/20200128220445.DE778207FD@mail.kernel.org/

> 
> This patchseries superseeds:
>  - [PATCH 0/4] ls1028a: dts fixes and new board support
>    
> https://lore.kernel.org/lkml/20191123201317.25861-1-michael@walle.cc/
>  - [PATCH] arm64: dts: sl28: configure the RGMII PHY
>    
> https://lore.kernel.org/lkml/20191123202624.28093-1-michael@walle.cc/
> 
> Michael Walle (5):
>   arm64: dts: ls1028a: fix typo in TMU calibration data
>   arm64: dts: ls1028a: add missing sai nodes
>   dt-bindings: arm: fsl: add LS1028A based boards
>   dt-bindings: arm: fsl: add Kontron sl28 boards
>   arm64: dts: freescale: add Kontron sl28 support
> 
>  .../devicetree/bindings/arm/fsl.yaml          |  45 +++++
>  arch/arm64/boot/dts/freescale/Makefile        |   4 +
>  .../fsl-ls1028a-kontron-kbox-a-230-ls.dts     |  27 +++
>  .../fsl-ls1028a-kontron-sl28-var3-ads2.dts    | 106 +++++++++++
>  .../fsl-ls1028a-kontron-sl28-var4.dts         |  50 +++++
>  .../freescale/fsl-ls1028a-kontron-sl28.dts    | 174 ++++++++++++++++++
>  .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi |  44 ++++-
>  7 files changed, 449 insertions(+), 1 deletion(-)
>  create mode 100644
> arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
>  create mode 100644
> arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
>  create mode 100644
> arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
>  create mode 100644 
> arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts