* [PATCH 0/2] rcar-csi2: make use V4L2_ASYNC_MATCH_CUSTOM to do fwnode matching
@ 2020-03-15 10:27 Lad Prabhakar
2020-03-15 10:27 ` [PATCH 1/2] media: v4l2-async: Pass pointer to struct v4l2_subdev in match_custom callback Lad Prabhakar
2020-03-15 10:27 ` [PATCH 2/2] media: rcar-csi2: Let the driver handle fwnode matching using " Lad Prabhakar
0 siblings, 2 replies; 7+ messages in thread
From: Lad Prabhakar @ 2020-03-15 10:27 UTC (permalink / raw)
To: Niklas, Mauro Carvalho Chehab, Sakari Ailus, Laurent Pinchart,
Hans Verkuil
Cc: linux-media, linux-renesas-soc, linux-kernel, Lad Prabhakar
Hi All,
This patch series adds support for fwnode matching to be handled by rcar-csi2 driver.
Thanks,
Prabhakar
Lad Prabhakar (2):
media: v4l2-async: Pass pointer to struct v4l2_subdev in match_custom
callback
media: rcar-csi2: Let the driver handle fwnode matching using
match_custom callback
drivers/media/platform/rcar-vin/rcar-csi2.c | 46 +++++++++++++++++++--
drivers/media/v4l2-core/v4l2-async.c | 2 +-
include/media/v4l2-async.h | 4 +-
3 files changed, 46 insertions(+), 6 deletions(-)
--
2.20.1
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/2] media: v4l2-async: Pass pointer to struct v4l2_subdev in match_custom callback
2020-03-15 10:27 [PATCH 0/2] rcar-csi2: make use V4L2_ASYNC_MATCH_CUSTOM to do fwnode matching Lad Prabhakar
@ 2020-03-15 10:27 ` Lad Prabhakar
2020-03-15 10:56 ` Laurent Pinchart
2020-03-15 10:27 ` [PATCH 2/2] media: rcar-csi2: Let the driver handle fwnode matching using " Lad Prabhakar
1 sibling, 1 reply; 7+ messages in thread
From: Lad Prabhakar @ 2020-03-15 10:27 UTC (permalink / raw)
To: Niklas, Mauro Carvalho Chehab, Sakari Ailus, Laurent Pinchart,
Hans Verkuil
Cc: linux-media, linux-renesas-soc, linux-kernel, Lad Prabhakar
Passing a pointer to struct device for the match_custom callback is of no
use as in the bridge driver to match the fwnode, so instead pass the
struct v4l2_subdev pointer so that the bridge driver has enough
information to match against the subdevices.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/media/v4l2-core/v4l2-async.c | 2 +-
include/media/v4l2-async.h | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/v4l2-core/v4l2-async.c b/drivers/media/v4l2-core/v4l2-async.c
index 8bde33c21ce4..f897d4025f97 100644
--- a/drivers/media/v4l2-core/v4l2-async.c
+++ b/drivers/media/v4l2-core/v4l2-async.c
@@ -80,7 +80,7 @@ static bool match_custom(struct v4l2_subdev *sd, struct v4l2_async_subdev *asd)
/* Match always */
return true;
- return asd->match.custom.match(sd->dev, asd);
+ return asd->match.custom.match(sd, asd);
}
static LIST_HEAD(subdev_list);
diff --git a/include/media/v4l2-async.h b/include/media/v4l2-async.h
index 8319284c93cb..8c014e3bbd6c 100644
--- a/include/media/v4l2-async.h
+++ b/include/media/v4l2-async.h
@@ -86,8 +86,8 @@ struct v4l2_async_subdev {
unsigned short address;
} i2c;
struct {
- bool (*match)(struct device *dev,
- struct v4l2_async_subdev *sd);
+ bool (*match)(struct v4l2_subdev *sd,
+ struct v4l2_async_subdev *asd);
void *priv;
} custom;
} match;
--
2.20.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/2] media: rcar-csi2: Let the driver handle fwnode matching using match_custom callback
2020-03-15 10:27 [PATCH 0/2] rcar-csi2: make use V4L2_ASYNC_MATCH_CUSTOM to do fwnode matching Lad Prabhakar
2020-03-15 10:27 ` [PATCH 1/2] media: v4l2-async: Pass pointer to struct v4l2_subdev in match_custom callback Lad Prabhakar
@ 2020-03-15 10:27 ` Lad Prabhakar
2020-03-15 10:29 ` Laurent Pinchart
1 sibling, 1 reply; 7+ messages in thread
From: Lad Prabhakar @ 2020-03-15 10:27 UTC (permalink / raw)
To: Niklas, Mauro Carvalho Chehab, Sakari Ailus, Laurent Pinchart,
Hans Verkuil
Cc: linux-media, linux-renesas-soc, linux-kernel, Lad Prabhakar
The rcar-csi2 driver uses the v4l2-async framework to do endpoint matching
instead of node matching. This is needed as it needs to work with the
adv748x driver which register it self in v4l2-async using endpoints
instead of nodes. The reason for this is that from a single DT node it
creates multiple subdevices, one for each endpoint.
But when using subdevs which register itself in v4l2-async using nodes,
the rcar-csi2 driver failed to find the matching endpoint because the
match.fwnode was pointing to remote endpoint instead of remote parent
port.
This commit adds support in rcar-csi2 driver to handle both the cases
where subdev registers in v4l2-async using endpoints/nodes, by using
match_type as V4L2_ASYNC_MATCH_CUSTOM and implementing the match()
callback to compare the fwnode of either remote/parent.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/media/platform/rcar-vin/rcar-csi2.c | 46 +++++++++++++++++++--
1 file changed, 43 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
index faa9fb23a2e9..1bbf05e9f025 100644
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -808,6 +808,46 @@ static int rcsi2_parse_v4l2(struct rcar_csi2 *priv,
return 0;
}
+static bool rcsi2_asd_match(struct v4l2_subdev *sd,
+ struct v4l2_async_subdev *asd)
+{
+ struct rcar_csi2 *priv = (struct rcar_csi2 *)asd->match.custom.priv;
+ struct fwnode_handle *remote_endpoint;
+ struct fwnode_handle *subdev_endpoint;
+ struct device_node *np;
+ bool matched = false;
+
+ np = of_graph_get_endpoint_by_regs(priv->dev->of_node, 0, 0);
+ if (!np) {
+ dev_err(priv->dev, "Not connected to subdevice\n");
+ return matched;
+ }
+
+ remote_endpoint =
+ fwnode_graph_get_remote_endpoint(of_fwnode_handle(np));
+ if (!remote_endpoint) {
+ dev_err(priv->dev, "Failed to get remote endpoint\n");
+ of_node_put(np);
+ return matched;
+ }
+ of_node_put(np);
+
+ if (sd->fwnode != dev_fwnode(sd->dev)) {
+ if (remote_endpoint == sd->fwnode)
+ matched = true;
+ } else {
+ subdev_endpoint =
+ fwnode_graph_get_next_endpoint(dev_fwnode(sd->dev), NULL);
+ if (remote_endpoint == subdev_endpoint)
+ matched = true;
+ fwnode_handle_put(subdev_endpoint);
+ }
+
+ fwnode_handle_put(remote_endpoint);
+
+ return matched;
+}
+
static int rcsi2_parse_dt(struct rcar_csi2 *priv)
{
struct device_node *ep;
@@ -833,9 +873,9 @@ static int rcsi2_parse_dt(struct rcar_csi2 *priv)
return ret;
}
- priv->asd.match.fwnode =
- fwnode_graph_get_remote_endpoint(of_fwnode_handle(ep));
- priv->asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
+ priv->asd.match.custom.match = &rcsi2_asd_match;
+ priv->asd.match.custom.priv = priv;
+ priv->asd.match_type = V4L2_ASYNC_MATCH_CUSTOM;
of_node_put(ep);
--
2.20.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 2/2] media: rcar-csi2: Let the driver handle fwnode matching using match_custom callback
2020-03-15 10:27 ` [PATCH 2/2] media: rcar-csi2: Let the driver handle fwnode matching using " Lad Prabhakar
@ 2020-03-15 10:29 ` Laurent Pinchart
2020-03-15 12:10 ` Lad, Prabhakar
0 siblings, 1 reply; 7+ messages in thread
From: Laurent Pinchart @ 2020-03-15 10:29 UTC (permalink / raw)
To: Lad Prabhakar
Cc: Niklas, Mauro Carvalho Chehab, Sakari Ailus, Hans Verkuil,
linux-media, linux-renesas-soc, linux-kernel, Lad Prabhakar
Hi Prabhakar,
Thank you for the patch.
On Sun, Mar 15, 2020 at 10:27:24AM +0000, Lad Prabhakar wrote:
> The rcar-csi2 driver uses the v4l2-async framework to do endpoint matching
> instead of node matching. This is needed as it needs to work with the
> adv748x driver which register it self in v4l2-async using endpoints
> instead of nodes. The reason for this is that from a single DT node it
> creates multiple subdevices, one for each endpoint.
>
> But when using subdevs which register itself in v4l2-async using nodes,
> the rcar-csi2 driver failed to find the matching endpoint because the
> match.fwnode was pointing to remote endpoint instead of remote parent
> port.
>
> This commit adds support in rcar-csi2 driver to handle both the cases
> where subdev registers in v4l2-async using endpoints/nodes, by using
> match_type as V4L2_ASYNC_MATCH_CUSTOM and implementing the match()
> callback to compare the fwnode of either remote/parent.
This is not the way to go. The v4l2-async framework needs to be fixed
instead, so that fwnode match will do the right thing automatically
regardless of whether the node is a device node or and endpoint node.
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> drivers/media/platform/rcar-vin/rcar-csi2.c | 46 +++++++++++++++++++--
> 1 file changed, 43 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
> index faa9fb23a2e9..1bbf05e9f025 100644
> --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> @@ -808,6 +808,46 @@ static int rcsi2_parse_v4l2(struct rcar_csi2 *priv,
> return 0;
> }
>
> +static bool rcsi2_asd_match(struct v4l2_subdev *sd,
> + struct v4l2_async_subdev *asd)
> +{
> + struct rcar_csi2 *priv = (struct rcar_csi2 *)asd->match.custom.priv;
> + struct fwnode_handle *remote_endpoint;
> + struct fwnode_handle *subdev_endpoint;
> + struct device_node *np;
> + bool matched = false;
> +
> + np = of_graph_get_endpoint_by_regs(priv->dev->of_node, 0, 0);
> + if (!np) {
> + dev_err(priv->dev, "Not connected to subdevice\n");
> + return matched;
> + }
> +
> + remote_endpoint =
> + fwnode_graph_get_remote_endpoint(of_fwnode_handle(np));
> + if (!remote_endpoint) {
> + dev_err(priv->dev, "Failed to get remote endpoint\n");
> + of_node_put(np);
> + return matched;
> + }
> + of_node_put(np);
> +
> + if (sd->fwnode != dev_fwnode(sd->dev)) {
> + if (remote_endpoint == sd->fwnode)
> + matched = true;
> + } else {
> + subdev_endpoint =
> + fwnode_graph_get_next_endpoint(dev_fwnode(sd->dev), NULL);
> + if (remote_endpoint == subdev_endpoint)
> + matched = true;
> + fwnode_handle_put(subdev_endpoint);
> + }
> +
> + fwnode_handle_put(remote_endpoint);
> +
> + return matched;
> +}
> +
> static int rcsi2_parse_dt(struct rcar_csi2 *priv)
> {
> struct device_node *ep;
> @@ -833,9 +873,9 @@ static int rcsi2_parse_dt(struct rcar_csi2 *priv)
> return ret;
> }
>
> - priv->asd.match.fwnode =
> - fwnode_graph_get_remote_endpoint(of_fwnode_handle(ep));
> - priv->asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
> + priv->asd.match.custom.match = &rcsi2_asd_match;
> + priv->asd.match.custom.priv = priv;
> + priv->asd.match_type = V4L2_ASYNC_MATCH_CUSTOM;
>
> of_node_put(ep);
>
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/2] media: v4l2-async: Pass pointer to struct v4l2_subdev in match_custom callback
2020-03-15 10:27 ` [PATCH 1/2] media: v4l2-async: Pass pointer to struct v4l2_subdev in match_custom callback Lad Prabhakar
@ 2020-03-15 10:56 ` Laurent Pinchart
0 siblings, 0 replies; 7+ messages in thread
From: Laurent Pinchart @ 2020-03-15 10:56 UTC (permalink / raw)
To: Lad Prabhakar
Cc: Niklas, Mauro Carvalho Chehab, Sakari Ailus, Hans Verkuil,
linux-media, linux-renesas-soc, linux-kernel, Lad Prabhakar
Hi Prabhakar,
Thank you for the patch.
On Sun, Mar 15, 2020 at 10:27:23AM +0000, Lad Prabhakar wrote:
> Passing a pointer to struct device for the match_custom callback is of no
> use as in the bridge driver to match the fwnode, so instead pass the
> struct v4l2_subdev pointer so that the bridge driver has enough
> information to match against the subdevices.
I'm not sure I like this. Conceptually speaking, the driver that
registers the notifier wants to get v4l2_subdev instances corresponding
to devices. A struct device is thus all it should need. Giving the match
function access to the subdev opens the door to all kind of nasty hacks.
In any case, I don't think is is required, see my reply to patch 2/2.
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
> drivers/media/v4l2-core/v4l2-async.c | 2 +-
> include/media/v4l2-async.h | 4 ++--
> 2 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/media/v4l2-core/v4l2-async.c b/drivers/media/v4l2-core/v4l2-async.c
> index 8bde33c21ce4..f897d4025f97 100644
> --- a/drivers/media/v4l2-core/v4l2-async.c
> +++ b/drivers/media/v4l2-core/v4l2-async.c
> @@ -80,7 +80,7 @@ static bool match_custom(struct v4l2_subdev *sd, struct v4l2_async_subdev *asd)
> /* Match always */
> return true;
>
> - return asd->match.custom.match(sd->dev, asd);
> + return asd->match.custom.match(sd, asd);
> }
>
> static LIST_HEAD(subdev_list);
> diff --git a/include/media/v4l2-async.h b/include/media/v4l2-async.h
> index 8319284c93cb..8c014e3bbd6c 100644
> --- a/include/media/v4l2-async.h
> +++ b/include/media/v4l2-async.h
> @@ -86,8 +86,8 @@ struct v4l2_async_subdev {
> unsigned short address;
> } i2c;
> struct {
> - bool (*match)(struct device *dev,
> - struct v4l2_async_subdev *sd);
> + bool (*match)(struct v4l2_subdev *sd,
> + struct v4l2_async_subdev *asd);
> void *priv;
> } custom;
> } match;
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 2/2] media: rcar-csi2: Let the driver handle fwnode matching using match_custom callback
2020-03-15 10:29 ` Laurent Pinchart
@ 2020-03-15 12:10 ` Lad, Prabhakar
2020-03-15 12:57 ` Laurent Pinchart
0 siblings, 1 reply; 7+ messages in thread
From: Lad, Prabhakar @ 2020-03-15 12:10 UTC (permalink / raw)
To: Laurent Pinchart
Cc: Niklas, Mauro Carvalho Chehab, Sakari Ailus, Hans Verkuil,
linux-media, Linux-Renesas, LKML, Lad Prabhakar
Hi Laurent,
Thank you for the quick review.
On Sun, Mar 15, 2020 at 10:30 AM Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Prabhakar,
>
> Thank you for the patch.
>
> On Sun, Mar 15, 2020 at 10:27:24AM +0000, Lad Prabhakar wrote:
> > The rcar-csi2 driver uses the v4l2-async framework to do endpoint matching
> > instead of node matching. This is needed as it needs to work with the
> > adv748x driver which register it self in v4l2-async using endpoints
> > instead of nodes. The reason for this is that from a single DT node it
> > creates multiple subdevices, one for each endpoint.
> >
> > But when using subdevs which register itself in v4l2-async using nodes,
> > the rcar-csi2 driver failed to find the matching endpoint because the
> > match.fwnode was pointing to remote endpoint instead of remote parent
> > port.
> >
> > This commit adds support in rcar-csi2 driver to handle both the cases
> > where subdev registers in v4l2-async using endpoints/nodes, by using
> > match_type as V4L2_ASYNC_MATCH_CUSTOM and implementing the match()
> > callback to compare the fwnode of either remote/parent.
>
> This is not the way to go. The v4l2-async framework needs to be fixed
> instead, so that fwnode match will do the right thing automatically
> regardless of whether the node is a device node or and endpoint node.
>
OK, so moving forward should the v4l2-async do strictly endpoint
matching only or
both nodes/endpoints. fwnode in all the bridge drivers be replaced to
remote endpoints ?
Looking at the adv7604 its registered as node to v4l2-async which can
have upto 3 endpoints,
adv748x is the single driver which registers itself as endpoint to
v4l2-async, and rest of the
other subdevices have single endpoint and are registered as node to
v4l2-async. How would you
suggest to handle these cases.
Cheers,
--Prabhakar Lad
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > ---
> > drivers/media/platform/rcar-vin/rcar-csi2.c | 46 +++++++++++++++++++--
> > 1 file changed, 43 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
> > index faa9fb23a2e9..1bbf05e9f025 100644
> > --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> > +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> > @@ -808,6 +808,46 @@ static int rcsi2_parse_v4l2(struct rcar_csi2 *priv,
> > return 0;
> > }
> >
> > +static bool rcsi2_asd_match(struct v4l2_subdev *sd,
> > + struct v4l2_async_subdev *asd)
> > +{
> > + struct rcar_csi2 *priv = (struct rcar_csi2 *)asd->match.custom.priv;
> > + struct fwnode_handle *remote_endpoint;
> > + struct fwnode_handle *subdev_endpoint;
> > + struct device_node *np;
> > + bool matched = false;
> > +
> > + np = of_graph_get_endpoint_by_regs(priv->dev->of_node, 0, 0);
> > + if (!np) {
> > + dev_err(priv->dev, "Not connected to subdevice\n");
> > + return matched;
> > + }
> > +
> > + remote_endpoint =
> > + fwnode_graph_get_remote_endpoint(of_fwnode_handle(np));
> > + if (!remote_endpoint) {
> > + dev_err(priv->dev, "Failed to get remote endpoint\n");
> > + of_node_put(np);
> > + return matched;
> > + }
> > + of_node_put(np);
> > +
> > + if (sd->fwnode != dev_fwnode(sd->dev)) {
> > + if (remote_endpoint == sd->fwnode)
> > + matched = true;
> > + } else {
> > + subdev_endpoint =
> > + fwnode_graph_get_next_endpoint(dev_fwnode(sd->dev), NULL);
> > + if (remote_endpoint == subdev_endpoint)
> > + matched = true;
> > + fwnode_handle_put(subdev_endpoint);
> > + }
> > +
> > + fwnode_handle_put(remote_endpoint);
> > +
> > + return matched;
> > +}
> > +
> > static int rcsi2_parse_dt(struct rcar_csi2 *priv)
> > {
> > struct device_node *ep;
> > @@ -833,9 +873,9 @@ static int rcsi2_parse_dt(struct rcar_csi2 *priv)
> > return ret;
> > }
> >
> > - priv->asd.match.fwnode =
> > - fwnode_graph_get_remote_endpoint(of_fwnode_handle(ep));
> > - priv->asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
> > + priv->asd.match.custom.match = &rcsi2_asd_match;
> > + priv->asd.match.custom.priv = priv;
> > + priv->asd.match_type = V4L2_ASYNC_MATCH_CUSTOM;
> >
> > of_node_put(ep);
> >
>
> --
> Regards,
>
> Laurent Pinchart
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 2/2] media: rcar-csi2: Let the driver handle fwnode matching using match_custom callback
2020-03-15 12:10 ` Lad, Prabhakar
@ 2020-03-15 12:57 ` Laurent Pinchart
0 siblings, 0 replies; 7+ messages in thread
From: Laurent Pinchart @ 2020-03-15 12:57 UTC (permalink / raw)
To: Lad, Prabhakar
Cc: Niklas, Mauro Carvalho Chehab, Sakari Ailus, Hans Verkuil,
linux-media, Linux-Renesas, LKML, Lad Prabhakar
Hi Prabhakar,
On Sun, Mar 15, 2020 at 12:10:14PM +0000, Lad, Prabhakar wrote:
> On Sun, Mar 15, 2020 at 10:30 AM Laurent Pinchart wrote:
> > On Sun, Mar 15, 2020 at 10:27:24AM +0000, Lad Prabhakar wrote:
> > > The rcar-csi2 driver uses the v4l2-async framework to do endpoint matching
> > > instead of node matching. This is needed as it needs to work with the
> > > adv748x driver which register it self in v4l2-async using endpoints
> > > instead of nodes. The reason for this is that from a single DT node it
> > > creates multiple subdevices, one for each endpoint.
> > >
> > > But when using subdevs which register itself in v4l2-async using nodes,
> > > the rcar-csi2 driver failed to find the matching endpoint because the
> > > match.fwnode was pointing to remote endpoint instead of remote parent
> > > port.
> > >
> > > This commit adds support in rcar-csi2 driver to handle both the cases
> > > where subdev registers in v4l2-async using endpoints/nodes, by using
> > > match_type as V4L2_ASYNC_MATCH_CUSTOM and implementing the match()
> > > callback to compare the fwnode of either remote/parent.
> >
> > This is not the way to go. The v4l2-async framework needs to be fixed
> > instead, so that fwnode match will do the right thing automatically
> > regardless of whether the node is a device node or and endpoint node.
>
> OK, so moving forward should the v4l2-async do strictly endpoint
> matching only or both nodes/endpoints. fwnode in all the bridge
> drivers be replaced to remote endpoints ?
Long term I think everything should use endpoint matching, but to get
there we shouldn't transition all drivers in one go. I've submitted a
patch to v4l2-async that I believe will fix your problem and allow for a
smooth transition. Could you give it a try ?
> Looking at the adv7604 its registered as node to v4l2-async which can
> have upto 3 endpoints, adv748x is the single driver which registers
> itself as endpoint to v4l2-async, and rest of the other subdevices
> have single endpoint and are registered as node to v4l2-async. How
> would you suggest to handle these cases.
>
> > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > > ---
> > > drivers/media/platform/rcar-vin/rcar-csi2.c | 46 +++++++++++++++++++--
> > > 1 file changed, 43 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
> > > index faa9fb23a2e9..1bbf05e9f025 100644
> > > --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> > > +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> > > @@ -808,6 +808,46 @@ static int rcsi2_parse_v4l2(struct rcar_csi2 *priv,
> > > return 0;
> > > }
> > >
> > > +static bool rcsi2_asd_match(struct v4l2_subdev *sd,
> > > + struct v4l2_async_subdev *asd)
> > > +{
> > > + struct rcar_csi2 *priv = (struct rcar_csi2 *)asd->match.custom.priv;
> > > + struct fwnode_handle *remote_endpoint;
> > > + struct fwnode_handle *subdev_endpoint;
> > > + struct device_node *np;
> > > + bool matched = false;
> > > +
> > > + np = of_graph_get_endpoint_by_regs(priv->dev->of_node, 0, 0);
> > > + if (!np) {
> > > + dev_err(priv->dev, "Not connected to subdevice\n");
> > > + return matched;
> > > + }
> > > +
> > > + remote_endpoint =
> > > + fwnode_graph_get_remote_endpoint(of_fwnode_handle(np));
> > > + if (!remote_endpoint) {
> > > + dev_err(priv->dev, "Failed to get remote endpoint\n");
> > > + of_node_put(np);
> > > + return matched;
> > > + }
> > > + of_node_put(np);
> > > +
> > > + if (sd->fwnode != dev_fwnode(sd->dev)) {
> > > + if (remote_endpoint == sd->fwnode)
> > > + matched = true;
> > > + } else {
> > > + subdev_endpoint =
> > > + fwnode_graph_get_next_endpoint(dev_fwnode(sd->dev), NULL);
> > > + if (remote_endpoint == subdev_endpoint)
> > > + matched = true;
> > > + fwnode_handle_put(subdev_endpoint);
> > > + }
> > > +
> > > + fwnode_handle_put(remote_endpoint);
> > > +
> > > + return matched;
> > > +}
> > > +
> > > static int rcsi2_parse_dt(struct rcar_csi2 *priv)
> > > {
> > > struct device_node *ep;
> > > @@ -833,9 +873,9 @@ static int rcsi2_parse_dt(struct rcar_csi2 *priv)
> > > return ret;
> > > }
> > >
> > > - priv->asd.match.fwnode =
> > > - fwnode_graph_get_remote_endpoint(of_fwnode_handle(ep));
> > > - priv->asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
> > > + priv->asd.match.custom.match = &rcsi2_asd_match;
> > > + priv->asd.match.custom.priv = priv;
> > > + priv->asd.match_type = V4L2_ASYNC_MATCH_CUSTOM;
> > >
> > > of_node_put(ep);
> > >
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-03-15 12:57 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-15 10:27 [PATCH 0/2] rcar-csi2: make use V4L2_ASYNC_MATCH_CUSTOM to do fwnode matching Lad Prabhakar
2020-03-15 10:27 ` [PATCH 1/2] media: v4l2-async: Pass pointer to struct v4l2_subdev in match_custom callback Lad Prabhakar
2020-03-15 10:56 ` Laurent Pinchart
2020-03-15 10:27 ` [PATCH 2/2] media: rcar-csi2: Let the driver handle fwnode matching using " Lad Prabhakar
2020-03-15 10:29 ` Laurent Pinchart
2020-03-15 12:10 ` Lad, Prabhakar
2020-03-15 12:57 ` Laurent Pinchart
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).