[Patch v2 1/9] spi: bcm-qspi: Handle clock probe deferral

[Patch v2 1/9] spi: bcm-qspi: Handle clock probe deferral

[Kamal Dasu]

From: Florian Fainelli <f.fainelli@gmail.com>

The clock provider may not be ready by the time spi-bcm-qspi gets
probed, handle probe deferral using devm_clk_get_optional().

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 drivers/spi/spi-bcm-qspi.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index 23d295f36c80..74f4579c3f6a 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -1222,6 +1222,11 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	}
 
 	qspi = spi_master_get_devdata(master);
+
+	qspi->clk = devm_clk_get_optional(&pdev->dev, NULL);
+	if (IS_ERR(qspi->clk))
+		return PTR_ERR(qspi->clk);
+
 	qspi->pdev = pdev;
 	qspi->trans_pos.trans = NULL;
 	qspi->trans_pos.byte = 0;
@@ -1335,13 +1340,6 @@ int bcm_qspi_probe(struct platform_device *pdev,
 		qspi->soc_intc = NULL;
 	}
 
-	qspi->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(qspi->clk)) {
-		dev_warn(dev, "unable to get clock\n");
-		ret = PTR_ERR(qspi->clk);
-		goto qspi_probe_err;
-	}
-
 	ret = clk_prepare_enable(qspi->clk);
 	if (ret) {
 		dev_err(dev, "failed to prepare clock\n");
-- 
2.17.1

[Patch v2 2/9] dt: bindings: spi: Add support for mspi on brcmstb SoCs

[Kamal Dasu]

Added documentation for compatibility for brcmstb SoCs :
7425, 7429, 7435, 7216, 7278

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 .../devicetree/bindings/spi/brcm,spi-bcm-qspi.txt      | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
index ad7ac80a3841..f5e518d099f2 100644
--- a/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
+++ b/Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
@@ -26,6 +26,16 @@ Required properties:
     "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-qspi" : MSPI+BSPI on BRCMSTB SoCs
     "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
 						   BRCMSTB  SoCs
+    "brcm,spi-bcm7425-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+    			     			  			    BRCMSTB  SoCs
+    "brcm,spi-bcm7429-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+    			     			  			    BRCMSTB  SoCs
+    "brcm,spi-bcm7435-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+    			     			  			    BRCMSTB  SoCs
+    "brcm,spi-bcm7216-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+    			     			  			    BRCMSTB  SoCs
+    "brcm,spi-bcm7278-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
+    			     			  			    BRCMSTB  SoCs
     "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"     : MSPI+BSPI on Cygnus, NSP
     "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi"     : NS2 SoCs
 
-- 
2.17.1

[Patch v2 3/9] spi: bcm-qspi: Handle lack of MSPI_REV offset

[Kamal Dasu]

Older MIPS chips have a QSPI/MSPI controller that does not have the
MSPI_REV offset, reading from that offset will cause a bus error. Match
their compatible string and do not perform a read from that register in
that case.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 drivers/spi/spi-bcm-qspi.c | 50 ++++++++++++++++++++++++++++++++++++--
 1 file changed, 48 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index 74f4579c3f6a..d901dcb10d06 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -91,6 +91,7 @@
 #define MSPI_MSPI_STATUS			0x020
 #define MSPI_CPTQP				0x024
 #define MSPI_SPCR3				0x028
+#define MSPI_REV				0x02c
 #define MSPI_TXRAM				0x040
 #define MSPI_RXRAM				0x0c0
 #define MSPI_CDRAM				0x140
@@ -217,6 +218,8 @@ struct bcm_qspi {
 	struct bcm_qspi_dev_id *dev_ids;
 	struct completion mspi_done;
 	struct completion bspi_done;
+	u8 mspi_maj_rev;
+	u8 mspi_min_rev;
 };
 
 static inline bool has_bspi(struct bcm_qspi *qspi)
@@ -1190,8 +1193,35 @@ static const struct spi_controller_mem_ops bcm_qspi_mem_ops = {
 	.exec_op = bcm_qspi_exec_mem_op,
 };
 
+struct bcm_qspi_data {
+	bool	has_mspi_rev;
+};
+
+static const struct bcm_qspi_data bcm_qspi_no_rev_data = {
+	.has_mspi_rev	= false,
+};
+
+static const struct bcm_qspi_data bcm_qspi_rev_data = {
+	.has_mspi_rev	= true,
+};
+
 static const struct of_device_id bcm_qspi_of_match[] = {
-	{ .compatible = "brcm,spi-bcm-qspi" },
+	{
+		.compatible = "brcm,spi-bcm7425-qspi",
+		.data = &bcm_qspi_no_rev_data,
+	},
+	{
+		.compatible = "brcm,spi-bcm7429-qspi",
+		.data = &bcm_qspi_no_rev_data,
+	},
+	{
+		.compatible = "brcm,spi-bcm7435-qspi",
+		.data = &bcm_qspi_no_rev_data,
+	},
+	{
+		.compatible = "brcm,spi-bcm-qspi",
+		.data = &bcm_qspi_rev_data,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, bcm_qspi_of_match);
@@ -1199,12 +1229,15 @@ MODULE_DEVICE_TABLE(of, bcm_qspi_of_match);
 int bcm_qspi_probe(struct platform_device *pdev,
 		   struct bcm_qspi_soc_intc *soc_intc)
 {
+	const struct of_device_id *of_id = NULL;
+	const struct bcm_qspi_data *data;
 	struct device *dev = &pdev->dev;
 	struct bcm_qspi *qspi;
 	struct spi_master *master;
 	struct resource *res;
 	int irq, ret = 0, num_ints = 0;
 	u32 val;
+	u32 rev = 0;
 	const char *name = NULL;
 	int num_irqs = ARRAY_SIZE(qspi_irq_tab);
 
@@ -1212,9 +1245,12 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	if (!dev->of_node)
 		return -ENODEV;
 
-	if (!of_match_node(bcm_qspi_of_match, dev->of_node))
+	of_id = of_match_node(bcm_qspi_of_match, dev->of_node);
+	if (!of_id)
 		return -ENODEV;
 
+	data = of_id->data;
+
 	master = spi_alloc_master(dev, sizeof(struct bcm_qspi));
 	if (!master) {
 		dev_err(dev, "error allocating spi_master\n");
@@ -1349,6 +1385,16 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	qspi->base_clk = clk_get_rate(qspi->clk);
 	qspi->max_speed_hz = qspi->base_clk / (QSPI_SPBR_MIN * 2);
 
+	if (data->has_mspi_rev) {
+		rev = bcm_qspi_read(qspi, MSPI, MSPI_REV);
+		/* some older revs do not have a MSPI_REV register */
+		if ((rev & 0xff) == 0xff)
+			rev = 0;
+	}
+
+	qspi->mspi_maj_rev = (rev >> 4) & 0xf;
+	qspi->mspi_min_rev = rev & 0xf;
+
 	bcm_qspi_hw_init(qspi);
 	init_completion(&qspi->mspi_done);
 	init_completion(&qspi->bspi_done);
-- 
2.17.1

[Patch v2 4/9] spi: bcm-qspi: Drive MSPI peripheral SSb pin on cs_change

[Kamal Dasu]

As per the spi core implementation for MSPI devices when the transfer is
the last one in the message, the chip may stay selected until the next
transfer. On multi-device SPI busses with nothing blocking messages going
to other devices, this is just a performance hint; starting a message to
another device deselects this one. But in other cases, this can be used
to ensure correctness. Some devices need protocol transactions to be built
from a series of spi_message submissions, where the content of one message
is determined by the results of previous messages and where the whole
transaction ends when the chipselect goes intactive.

On CS change after completing the last serial transfer, the MSPI driver
drives SSb pin CDRAM register correctly according comments in core spi.h
as shown below:

case 1) EOM =1, cs_change =0: SSb inactive
case 2) EOM =1, cs_change =1: SSb active
case 3) EOM =0, cs_change =0: SSb active
case 4) EOM =0, cs_change =1: SSb inactive

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 drivers/spi/spi-bcm-qspi.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index d901dcb10d06..c48c399dce53 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -615,19 +615,15 @@ static int update_qspi_trans_byte_count(struct bcm_qspi *qspi,
 		if (qt->trans->cs_change &&
 		    (flags & TRANS_STATUS_BREAK_CS_CHANGE))
 			ret |= TRANS_STATUS_BREAK_CS_CHANGE;
-		if (ret)
-			goto done;
 
-		dev_dbg(&qspi->pdev->dev, "advance msg exit\n");
 		if (bcm_qspi_mspi_transfer_is_last(qspi, qt))
-			ret = TRANS_STATUS_BREAK_EOM;
+			ret |= TRANS_STATUS_BREAK_EOM;
 		else
-			ret = TRANS_STATUS_BREAK_NO_BYTES;
+			ret |= TRANS_STATUS_BREAK_NO_BYTES;
 
 		qt->trans = NULL;
 	}
 
-done:
 	dev_dbg(&qspi->pdev->dev, "trans %p len %d byte %d ret %x\n",
 		qt->trans, qt->trans ? qt->trans->len : 0, qt->byte, ret);
 	return ret;
@@ -774,7 +770,16 @@ static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi)
 	bcm_qspi_write(qspi, MSPI, MSPI_NEWQP, 0);
 	bcm_qspi_write(qspi, MSPI, MSPI_ENDQP, slot - 1);
 
-	if (tstatus & TRANS_STATUS_BREAK_DESELECT) {
+	/*
+	 *  case 1) EOM =1, cs_change =0: SSb inactive
+	 *  case 2) EOM =1, cs_change =1: SSb stay active
+	 *  case 3) EOM =0, cs_change =0: SSb stay active
+	 *  case 4) EOM =0, cs_change =1: SSb inactive
+	 */
+	if (((tstatus & TRANS_STATUS_BREAK_DESELECT)
+	     == TRANS_STATUS_BREAK_CS_CHANGE) ||
+	    ((tstatus & TRANS_STATUS_BREAK_DESELECT)
+	     == TRANS_STATUS_BREAK_EOM)) {
 		mspi_cdram = read_cdram_slot(qspi, slot - 1) &
 			~MSPI_CDRAM_CONT_BIT;
 		write_cdram_slot(qspi, slot - 1, mspi_cdram);
-- 
2.17.1

[Patch v2 5/9] spi: bcm-qspi: when tx/rx buffer is NULL set to 0

[Kamal Dasu]

From: Justin Chen <justinpopo6@gmail.com>

Currently we set the tx/rx buffer to 0xff when NULL. This causes
problems with some spi slaves where 0xff is a valid command. Looking
at other drivers, the tx/rx buffer is usually set to 0x00 when NULL.
Following this convention solves the issue.

Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 drivers/spi/spi-bcm-qspi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index c48c399dce53..e00208801c8b 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -669,7 +669,7 @@ static void read_from_hw(struct bcm_qspi *qspi, int slots)
 			if (buf)
 				buf[tp.byte] = read_rxram_slot_u8(qspi, slot);
 			dev_dbg(&qspi->pdev->dev, "RD %02x\n",
-				buf ? buf[tp.byte] : 0xff);
+				buf ? buf[tp.byte] : 0x0);
 		} else {
 			u16 *buf = tp.trans->rx_buf;
 
@@ -677,7 +677,7 @@ static void read_from_hw(struct bcm_qspi *qspi, int slots)
 				buf[tp.byte / 2] = read_rxram_slot_u16(qspi,
 								      slot);
 			dev_dbg(&qspi->pdev->dev, "RD %04x\n",
-				buf ? buf[tp.byte] : 0xffff);
+				buf ? buf[tp.byte / 2] : 0x0);
 		}
 
 		update_qspi_trans_byte_count(qspi, &tp,
@@ -732,13 +732,13 @@ static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi)
 	while (!tstatus && slot < MSPI_NUM_CDRAM) {
 		if (tp.trans->bits_per_word <= 8) {
 			const u8 *buf = tp.trans->tx_buf;
-			u8 val = buf ? buf[tp.byte] : 0xff;
+			u8 val = buf ? buf[tp.byte] : 0x00;
 
 			write_txram_slot_u8(qspi, slot, val);
 			dev_dbg(&qspi->pdev->dev, "WR %02x\n", val);
 		} else {
 			const u16 *buf = tp.trans->tx_buf;
-			u16 val = buf ? buf[tp.byte / 2] : 0xffff;
+			u16 val = buf ? buf[tp.byte / 2] : 0x0000;
 
 			write_txram_slot_u16(qspi, slot, val);
 			dev_dbg(&qspi->pdev->dev, "WR %04x\n", val);
-- 
2.17.1

[Patch v2 6/9] spi: bcm-qspi: Make PM suspend/resume work with SCMI clock management

[Kamal Dasu]

SCMI only passes clk_prepare_enable() and clk_disable_unprepare(), made
changes to suspend/resume ops to use the appropriate calls so that PM
works for ARM and ARM64 platforms.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 drivers/spi/spi-bcm-qspi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index e00208801c8b..a3936ae5a860 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -1455,7 +1455,7 @@ static int __maybe_unused bcm_qspi_suspend(struct device *dev)
 			bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL);
 
 	spi_master_suspend(qspi->master);
-	clk_disable(qspi->clk);
+	clk_disable_unprepare(qspi->clk);
 	bcm_qspi_hw_uninit(qspi);
 
 	return 0;
@@ -1473,7 +1473,7 @@ static int __maybe_unused bcm_qspi_resume(struct device *dev)
 		qspi->soc_intc->bcm_qspi_int_set(qspi->soc_intc, MSPI_DONE,
 						 true);
 
-	ret = clk_enable(qspi->clk);
+	ret = clk_prepare_enable(qspi->clk);
 	if (!ret)
 		spi_master_resume(qspi->master);
 
-- 
2.17.1

[Patch v2 7/9] spi: bcm-qspi: Use fastbr setting to allow faster MSPI speeds

[Kamal Dasu]

Setting MSPI_SPCR3.fastbr=1 allows using clock divider (SPBR) values of
1-7, while the default value prohibits these values and requires a minimum
clock divider value of 8.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 drivers/spi/spi-bcm-qspi.c | 36 +++++++++++++++++++++++++++++++++---
 1 file changed, 33 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index a3936ae5a860..edc601dbf221 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -107,13 +107,15 @@
 #define MSPI_SPCR2_SPE				BIT(6)
 #define MSPI_SPCR2_CONT_AFTER_CMD		BIT(7)
 
+#define MSPI_SPCR3_FASTBR			BIT(0)
+#define MSPI_SPCR3_FASTDT			BIT(1)
+
 #define MSPI_MSPI_STATUS_SPIF			BIT(0)
 
 #define INTR_BASE_BIT_SHIFT			0x02
 #define INTR_COUNT				0x07
 
 #define NUM_CHIPSELECT				4
-#define QSPI_SPBR_MIN				8U
 #define QSPI_SPBR_MAX				255U
 
 #define OPCODE_DIOR				0xBB
@@ -227,6 +229,25 @@ static inline bool has_bspi(struct bcm_qspi *qspi)
 	return qspi->bspi_mode;
 }
 
+/* hardware supports spcr3 and fast baud-rate  */
+static inline bool bcm_qspi_has_fastbr(struct bcm_qspi *qspi)
+{
+	if (!has_bspi(qspi) &&
+	    ((qspi->mspi_maj_rev >= 1) &&
+	     (qspi->mspi_min_rev >= 5)))
+		return true;
+
+	return false;
+}
+
+static inline int bcm_qspi_spbr_min(struct bcm_qspi *qspi)
+{
+	if (bcm_qspi_has_fastbr(qspi))
+		return 1;
+	else
+		return 8;
+}
+
 /* Read qspi controller register*/
 static inline u32 bcm_qspi_read(struct bcm_qspi *qspi, enum base_type type,
 				unsigned int offset)
@@ -534,7 +555,7 @@ static void bcm_qspi_hw_set_parms(struct bcm_qspi *qspi,
 	if (xp->speed_hz)
 		spbr = qspi->base_clk / (2 * xp->speed_hz);
 
-	spcr = clamp_val(spbr, QSPI_SPBR_MIN, QSPI_SPBR_MAX);
+	spcr = clamp_val(spbr, bcm_qspi_spbr_min(qspi), QSPI_SPBR_MAX);
 	bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_LSB, spcr);
 
 	spcr = MSPI_MASTER_BIT;
@@ -544,6 +565,14 @@ static void bcm_qspi_hw_set_parms(struct bcm_qspi *qspi,
 	spcr |= xp->mode & 3;
 	bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_MSB, spcr);
 
+	if (bcm_qspi_has_fastbr(qspi)) {
+		spcr = 0;
+
+		/* enable fastbr */
+		spcr |=	MSPI_SPCR3_FASTBR;
+		bcm_qspi_write(qspi, MSPI, MSPI_SPCR3, spcr);
+	}
+
 	qspi->last_parms = *xp;
 }
 
@@ -1388,7 +1417,6 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	}
 
 	qspi->base_clk = clk_get_rate(qspi->clk);
-	qspi->max_speed_hz = qspi->base_clk / (QSPI_SPBR_MIN * 2);
 
 	if (data->has_mspi_rev) {
 		rev = bcm_qspi_read(qspi, MSPI, MSPI_REV);
@@ -1400,6 +1428,8 @@ int bcm_qspi_probe(struct platform_device *pdev,
 	qspi->mspi_maj_rev = (rev >> 4) & 0xf;
 	qspi->mspi_min_rev = rev & 0xf;
 
+	qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2);
+
 	bcm_qspi_hw_init(qspi);
 	init_completion(&qspi->mspi_done);
 	init_completion(&qspi->bspi_done);
-- 
2.17.1

[Patch v2 8/9] spi: bcm-qspi: add support for MSPI sys clk 108Mhz

[Kamal Dasu]

Adding support for MSPI sys clk 108Mhz available on 7216
and 7278 BRCMSTB SoCs.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 drivers/spi/spi-bcm-qspi.c | 44 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index edc601dbf221..99f2cfcbb50c 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -109,6 +109,11 @@
 
 #define MSPI_SPCR3_FASTBR			BIT(0)
 #define MSPI_SPCR3_FASTDT			BIT(1)
+#define MSPI_SPCR3_SYSCLKSEL_MASK		GENMASK(11, 10)
+#define MSPI_SPCR3_SYSCLKSEL_27			(MSPI_SPCR3_SYSCLKSEL_MASK & \
+						 ~(BIT(10) | BIT(11)))
+#define MSPI_SPCR3_SYSCLKSEL_108		(MSPI_SPCR3_SYSCLKSEL_MASK & \
+						 BIT(11))
 
 #define MSPI_MSPI_STATUS_SPIF			BIT(0)
 
@@ -117,6 +122,7 @@
 
 #define NUM_CHIPSELECT				4
 #define QSPI_SPBR_MAX				255U
+#define MSPI_BASE_FREQ				27000000UL
 
 #define OPCODE_DIOR				0xBB
 #define OPCODE_QIOR				0xEB
@@ -222,6 +228,7 @@ struct bcm_qspi {
 	struct completion bspi_done;
 	u8 mspi_maj_rev;
 	u8 mspi_min_rev;
+	bool mspi_spcr3_sysclk;
 };
 
 static inline bool has_bspi(struct bcm_qspi *qspi)
@@ -240,6 +247,17 @@ static inline bool bcm_qspi_has_fastbr(struct bcm_qspi *qspi)
 	return false;
 }
 
+/* hardware supports sys clk 108Mhz  */
+static inline bool bcm_qspi_has_sysclk_108(struct bcm_qspi *qspi)
+{
+	if (!has_bspi(qspi) && (qspi->mspi_spcr3_sysclk ||
+	    ((qspi->mspi_maj_rev >= 1) &&
+	     (qspi->mspi_min_rev >= 6))))
+		return true;
+
+	return false;
+}
+
 static inline int bcm_qspi_spbr_min(struct bcm_qspi *qspi)
 {
 	if (bcm_qspi_has_fastbr(qspi))
@@ -570,6 +588,15 @@ static void bcm_qspi_hw_set_parms(struct bcm_qspi *qspi,
 
 		/* enable fastbr */
 		spcr |=	MSPI_SPCR3_FASTBR;
+
+		if (bcm_qspi_has_sysclk_108(qspi)) {
+			/* SYSCLK_108 */
+			spcr |= MSPI_SPCR3_SYSCLKSEL_108;
+			qspi->base_clk = MSPI_BASE_FREQ * 4;
+			/* Change spbr as we changed sysclk */
+			bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_LSB, 4);
+		}
+
 		bcm_qspi_write(qspi, MSPI, MSPI_SPCR3, spcr);
 	}
 
@@ -1229,14 +1256,22 @@ static const struct spi_controller_mem_ops bcm_qspi_mem_ops = {
 
 struct bcm_qspi_data {
 	bool	has_mspi_rev;
+	bool	has_spcr3_sysclk;
 };
 
 static const struct bcm_qspi_data bcm_qspi_no_rev_data = {
 	.has_mspi_rev	= false,
+	.has_spcr3_sysclk = false,
 };
 
 static const struct bcm_qspi_data bcm_qspi_rev_data = {
 	.has_mspi_rev	= true,
+	.has_spcr3_sysclk = false,
+};
+
+static const struct bcm_qspi_data bcm_qspi_spcr3_data = {
+	.has_mspi_rev	= true,
+	.has_spcr3_sysclk = true,
 };
 
 static const struct of_device_id bcm_qspi_of_match[] = {
@@ -1256,6 +1291,14 @@ static const struct of_device_id bcm_qspi_of_match[] = {
 		.compatible = "brcm,spi-bcm-qspi",
 		.data = &bcm_qspi_rev_data,
 	},
+	{
+		.compatible = "brcm,spi-bcm7216-qspi",
+		.data = &bcm_qspi_spcr3_data,
+	},
+	{
+		.compatible = "brcm,spi-bcm7278-qspi",
+		.data = &bcm_qspi_spcr3_data,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, bcm_qspi_of_match);
@@ -1427,6 +1470,7 @@ int bcm_qspi_probe(struct platform_device *pdev,
 
 	qspi->mspi_maj_rev = (rev >> 4) & 0xf;
 	qspi->mspi_min_rev = rev & 0xf;
+	qspi->mspi_spcr3_sysclk = data->has_spcr3_sysclk;
 
 	qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2);
 
-- 
2.17.1

[Patch v2 9/9] spi: bcm-qspi: MSPI_SPCR0_MSB MSTR bit exists only on legacy controllers

[Kamal Dasu]

Set MASTER bit on the MSPI_SPCR0_MSB only for legacy MSPI and HIF_MSPI
controllers.

Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
---
 drivers/spi/spi-bcm-qspi.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index 99f2cfcbb50c..681d09085175 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -576,11 +576,17 @@ static void bcm_qspi_hw_set_parms(struct bcm_qspi *qspi,
 	spcr = clamp_val(spbr, bcm_qspi_spbr_min(qspi), QSPI_SPBR_MAX);
 	bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_LSB, spcr);
 
-	spcr = MSPI_MASTER_BIT;
+	if (!qspi->mspi_maj_rev)
+		/* legacy controller */
+		spcr = MSPI_MASTER_BIT;
+	else
+		spcr = 0;
+
 	/* for 16 bit the data should be zero */
 	if (xp->bits_per_word != 16)
 		spcr |= xp->bits_per_word << 2;
 	spcr |= xp->mode & 3;
+
 	bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_MSB, spcr);
 
 	if (bcm_qspi_has_fastbr(qspi)) {
-- 
2.17.1

Re: [Patch v2 3/9] spi: bcm-qspi: Handle lack of MSPI_REV offset

[Florian Fainelli]

Hi Kamal,

On 4/19/2020 12:23 PM, Kamal Dasu wrote:
> Older MIPS chips have a QSPI/MSPI controller that does not have the
> MSPI_REV offset, reading from that offset will cause a bus error. Match
> their compatible string and do not perform a read from that register in
> that case.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>

This patch should also have a From: that is from me.
-- 
Florian

Re: [Patch v2 3/9] spi: bcm-qspi: Handle lack of MSPI_REV offset

[Kamal Dasu]

Yes missed this one.
Should I send a v3 of the entire set.

Kamal

On Sun, Apr 19, 2020 at 3:44 PM Florian Fainelli <f.fainelli@gmail.com> wrote:
>
> Hi Kamal,
>
> On 4/19/2020 12:23 PM, Kamal Dasu wrote:
> > Older MIPS chips have a QSPI/MSPI controller that does not have the
> > MSPI_REV offset, reading from that offset will cause a bus error. Match
> > their compatible string and do not perform a read from that register in
> > that case.
> >
> > Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> > Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
>
> This patch should also have a From: that is from me.
> --
> Florian

Re: [Patch v2 3/9] spi: bcm-qspi: Handle lack of MSPI_REV offset

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 370 bytes --]

On Mon, Apr 20, 2020 at 11:12:21AM -0400, Kamal Dasu wrote:
> Yes missed this one.
> Should I send a v3 of the entire set.

Yes.

Please don't top post, reply in line with needed context.  This allows
readers to readily follow the flow of conversation and understand what
you are talking about and also helps ensure that everything in the
discussion is being addressed.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]