[PATCH AUTOSEL 5.4 01/26] libbpf: Initialize *nl_pid so gcc 10 is happy

[PATCH AUTOSEL 5.4 01/26] libbpf: Initialize *nl_pid so gcc 10 is happy

[Sasha Levin]

From: Jeremy Cline <jcline@redhat.com>

[ Upstream commit 4734b0fefbbf98f8c119eb8344efa19dac82cd2c ]

Builds of Fedora's kernel-tools package started to fail with "may be
used uninitialized" warnings for nl_pid in bpf_set_link_xdp_fd() and
bpf_get_link_xdp_info() on the s390 architecture.

Although libbpf_netlink_open() always returns a negative number when it
does not set *nl_pid, the compiler does not determine this and thus
believes the variable might be used uninitialized. Assuage gcc's fears
by explicitly initializing nl_pid.

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1807781

Signed-off-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200404051430.698058-1-jcline@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/netlink.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/lib/bpf/netlink.c b/tools/lib/bpf/netlink.c
index ce3ec81b71c01..88416be2bf994 100644
--- a/tools/lib/bpf/netlink.c
+++ b/tools/lib/bpf/netlink.c
@@ -137,7 +137,7 @@ int bpf_set_link_xdp_fd(int ifindex, int fd, __u32 flags)
 		struct ifinfomsg ifinfo;
 		char             attrbuf[64];
 	} req;
-	__u32 nl_pid;
+	__u32 nl_pid = 0;
 
 	sock = libbpf_netlink_open(&nl_pid);
 	if (sock < 0)
@@ -254,7 +254,7 @@ int bpf_get_link_xdp_id(int ifindex, __u32 *prog_id, __u32 flags)
 {
 	struct xdp_id_md xdp_id = {};
 	int sock, ret;
-	__u32 nl_pid;
+	__u32 nl_pid = 0;
 	__u32 mask;
 
 	if (flags & ~XDP_FLAGS_MASK)
-- 
2.20.1

[PATCH AUTOSEL 5.4 02/26] net: fec: set GPR bit on suspend by DT configuration.

[Sasha Levin]

From: Martin Fuzzey <martin.fuzzey@flowbird.group>

[ Upstream commit da722186f6549d752ea5b5fbc18111833c81a133 ]

On some SoCs, such as the i.MX6, it is necessary to set a bit
in the SoC level GPR register before suspending for wake on lan
to work.

The fec platform callback sleep_mode_enable was intended to allow this
but the platform implementation was NAK'd back in 2015 [1]

This means that, currently, wake on lan is broken on mainline for
the i.MX6 at least.

So implement the required bit setting in the fec driver by itself
by adding a new optional DT property indicating the GPR register
and adding the offset and bit information to the driver.

[1] https://www.spinics.net/lists/netdev/msg310922.html

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/fec.h      |   7 +
 drivers/net/ethernet/freescale/fec_main.c | 149 +++++++++++++++++-----
 2 files changed, 127 insertions(+), 29 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec.h b/drivers/net/ethernet/freescale/fec.h
index f79e57f735b39..d89568f810bc4 100644
--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -488,6 +488,12 @@ struct fec_enet_priv_rx_q {
 	struct  sk_buff *rx_skbuff[RX_RING_SIZE];
 };
 
+struct fec_stop_mode_gpr {
+	struct regmap *gpr;
+	u8 reg;
+	u8 bit;
+};
+
 /* The FEC buffer descriptors track the ring buffers.  The rx_bd_base and
  * tx_bd_base always point to the base of the buffer descriptors.  The
  * cur_rx and cur_tx point to the currently available buffer.
@@ -562,6 +568,7 @@ struct fec_enet_private {
 	int hwts_tx_en;
 	struct delayed_work time_keep;
 	struct regulator *reg_phy;
+	struct fec_stop_mode_gpr stop_gpr;
 
 	unsigned int tx_align;
 	unsigned int rx_align;
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 3fc8a66e4f41a..39c112f1543c1 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -62,6 +62,8 @@
 #include <linux/if_vlan.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/prefetch.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 #include <soc/imx/cpuidle.h>
 
 #include <asm/cacheflush.h>
@@ -84,6 +86,56 @@ static void fec_enet_itr_coal_init(struct net_device *ndev);
 #define FEC_ENET_OPD_V	0xFFF0
 #define FEC_MDIO_PM_TIMEOUT  100 /* ms */
 
+struct fec_devinfo {
+	u32 quirks;
+	u8 stop_gpr_reg;
+	u8 stop_gpr_bit;
+};
+
+static const struct fec_devinfo fec_imx25_info = {
+	.quirks = FEC_QUIRK_USE_GASKET | FEC_QUIRK_MIB_CLEAR |
+		  FEC_QUIRK_HAS_FRREG,
+};
+
+static const struct fec_devinfo fec_imx27_info = {
+	.quirks = FEC_QUIRK_MIB_CLEAR | FEC_QUIRK_HAS_FRREG,
+};
+
+static const struct fec_devinfo fec_imx28_info = {
+	.quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME |
+		  FEC_QUIRK_SINGLE_MDIO | FEC_QUIRK_HAS_RACC |
+		  FEC_QUIRK_HAS_FRREG,
+};
+
+static const struct fec_devinfo fec_imx6q_info = {
+	.quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
+		  FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
+		  FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR006358 |
+		  FEC_QUIRK_HAS_RACC,
+	.stop_gpr_reg = 0x34,
+	.stop_gpr_bit = 27,
+};
+
+static const struct fec_devinfo fec_mvf600_info = {
+	.quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_RACC,
+};
+
+static const struct fec_devinfo fec_imx6x_info = {
+	.quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
+		  FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
+		  FEC_QUIRK_HAS_VLAN | FEC_QUIRK_HAS_AVB |
+		  FEC_QUIRK_ERR007885 | FEC_QUIRK_BUG_CAPTURE |
+		  FEC_QUIRK_HAS_RACC | FEC_QUIRK_HAS_COALESCE,
+};
+
+static const struct fec_devinfo fec_imx6ul_info = {
+	.quirks = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
+		  FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
+		  FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR007885 |
+		  FEC_QUIRK_BUG_CAPTURE | FEC_QUIRK_HAS_RACC |
+		  FEC_QUIRK_HAS_COALESCE,
+};
+
 static struct platform_device_id fec_devtype[] = {
 	{
 		/* keep it for coldfire */
@@ -91,39 +143,25 @@ static struct platform_device_id fec_devtype[] = {
 		.driver_data = 0,
 	}, {
 		.name = "imx25-fec",
-		.driver_data = FEC_QUIRK_USE_GASKET | FEC_QUIRK_MIB_CLEAR |
-			       FEC_QUIRK_HAS_FRREG,
+		.driver_data = (kernel_ulong_t)&fec_imx25_info,
 	}, {
 		.name = "imx27-fec",
-		.driver_data = FEC_QUIRK_MIB_CLEAR | FEC_QUIRK_HAS_FRREG,
+		.driver_data = (kernel_ulong_t)&fec_imx27_info,
 	}, {
 		.name = "imx28-fec",
-		.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME |
-				FEC_QUIRK_SINGLE_MDIO | FEC_QUIRK_HAS_RACC |
-				FEC_QUIRK_HAS_FRREG,
+		.driver_data = (kernel_ulong_t)&fec_imx28_info,
 	}, {
 		.name = "imx6q-fec",
-		.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
-				FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
-				FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR006358 |
-				FEC_QUIRK_HAS_RACC,
+		.driver_data = (kernel_ulong_t)&fec_imx6q_info,
 	}, {
 		.name = "mvf600-fec",
-		.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_RACC,
+		.driver_data = (kernel_ulong_t)&fec_mvf600_info,
 	}, {
 		.name = "imx6sx-fec",
-		.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
-				FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
-				FEC_QUIRK_HAS_VLAN | FEC_QUIRK_HAS_AVB |
-				FEC_QUIRK_ERR007885 | FEC_QUIRK_BUG_CAPTURE |
-				FEC_QUIRK_HAS_RACC | FEC_QUIRK_HAS_COALESCE,
+		.driver_data = (kernel_ulong_t)&fec_imx6x_info,
 	}, {
 		.name = "imx6ul-fec",
-		.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT |
-				FEC_QUIRK_HAS_BUFDESC_EX | FEC_QUIRK_HAS_CSUM |
-				FEC_QUIRK_HAS_VLAN | FEC_QUIRK_ERR007885 |
-				FEC_QUIRK_BUG_CAPTURE | FEC_QUIRK_HAS_RACC |
-				FEC_QUIRK_HAS_COALESCE,
+		.driver_data = (kernel_ulong_t)&fec_imx6ul_info,
 	}, {
 		/* sentinel */
 	}
@@ -1092,11 +1130,28 @@ fec_restart(struct net_device *ndev)
 
 }
 
+static void fec_enet_stop_mode(struct fec_enet_private *fep, bool enabled)
+{
+	struct fec_platform_data *pdata = fep->pdev->dev.platform_data;
+	struct fec_stop_mode_gpr *stop_gpr = &fep->stop_gpr;
+
+	if (stop_gpr->gpr) {
+		if (enabled)
+			regmap_update_bits(stop_gpr->gpr, stop_gpr->reg,
+					   BIT(stop_gpr->bit),
+					   BIT(stop_gpr->bit));
+		else
+			regmap_update_bits(stop_gpr->gpr, stop_gpr->reg,
+					   BIT(stop_gpr->bit), 0);
+	} else if (pdata && pdata->sleep_mode_enable) {
+		pdata->sleep_mode_enable(enabled);
+	}
+}
+
 static void
 fec_stop(struct net_device *ndev)
 {
 	struct fec_enet_private *fep = netdev_priv(ndev);
-	struct fec_platform_data *pdata = fep->pdev->dev.platform_data;
 	u32 rmii_mode = readl(fep->hwp + FEC_R_CNTRL) & (1 << 8);
 	u32 val;
 
@@ -1125,9 +1180,7 @@ fec_stop(struct net_device *ndev)
 		val = readl(fep->hwp + FEC_ECNTRL);
 		val |= (FEC_ECR_MAGICEN | FEC_ECR_SLEEP);
 		writel(val, fep->hwp + FEC_ECNTRL);
-
-		if (pdata && pdata->sleep_mode_enable)
-			pdata->sleep_mode_enable(true);
+		fec_enet_stop_mode(fep, true);
 	}
 	writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
 
@@ -3398,6 +3451,37 @@ static int fec_enet_get_irq_cnt(struct platform_device *pdev)
 	return irq_cnt;
 }
 
+static int fec_enet_init_stop_mode(struct fec_enet_private *fep,
+				   struct fec_devinfo *dev_info,
+				   struct device_node *np)
+{
+	struct device_node *gpr_np;
+	int ret = 0;
+
+	if (!dev_info)
+		return 0;
+
+	gpr_np = of_parse_phandle(np, "gpr", 0);
+	if (!gpr_np)
+		return 0;
+
+	fep->stop_gpr.gpr = syscon_node_to_regmap(gpr_np);
+	if (IS_ERR(fep->stop_gpr.gpr)) {
+		dev_err(&fep->pdev->dev, "could not find gpr regmap\n");
+		ret = PTR_ERR(fep->stop_gpr.gpr);
+		fep->stop_gpr.gpr = NULL;
+		goto out;
+	}
+
+	fep->stop_gpr.reg = dev_info->stop_gpr_reg;
+	fep->stop_gpr.bit = dev_info->stop_gpr_bit;
+
+out:
+	of_node_put(gpr_np);
+
+	return ret;
+}
+
 static int
 fec_probe(struct platform_device *pdev)
 {
@@ -3412,6 +3496,7 @@ fec_probe(struct platform_device *pdev)
 	int num_rx_qs;
 	char irq_name[8];
 	int irq_cnt;
+	struct fec_devinfo *dev_info;
 
 	fec_enet_get_queue_num(pdev, &num_tx_qs, &num_rx_qs);
 
@@ -3429,7 +3514,9 @@ fec_probe(struct platform_device *pdev)
 	of_id = of_match_device(fec_dt_ids, &pdev->dev);
 	if (of_id)
 		pdev->id_entry = of_id->data;
-	fep->quirks = pdev->id_entry->driver_data;
+	dev_info = (struct fec_devinfo *)pdev->id_entry->driver_data;
+	if (dev_info)
+		fep->quirks = dev_info->quirks;
 
 	fep->netdev = ndev;
 	fep->num_rx_queues = num_rx_qs;
@@ -3463,6 +3550,10 @@ fec_probe(struct platform_device *pdev)
 	if (of_get_property(np, "fsl,magic-packet", NULL))
 		fep->wol_flag |= FEC_WOL_HAS_MAGIC_PACKET;
 
+	ret = fec_enet_init_stop_mode(fep, dev_info, np);
+	if (ret)
+		goto failed_stop_mode;
+
 	phy_node = of_parse_phandle(np, "phy-handle", 0);
 	if (!phy_node && of_phy_is_fixed_link(np)) {
 		ret = of_phy_register_fixed_link(np);
@@ -3631,6 +3722,7 @@ fec_probe(struct platform_device *pdev)
 	if (of_phy_is_fixed_link(np))
 		of_phy_deregister_fixed_link(np);
 	of_node_put(phy_node);
+failed_stop_mode:
 failed_phy:
 	dev_id--;
 failed_ioremap:
@@ -3708,7 +3800,6 @@ static int __maybe_unused fec_resume(struct device *dev)
 {
 	struct net_device *ndev = dev_get_drvdata(dev);
 	struct fec_enet_private *fep = netdev_priv(ndev);
-	struct fec_platform_data *pdata = fep->pdev->dev.platform_data;
 	int ret;
 	int val;
 
@@ -3726,8 +3817,8 @@ static int __maybe_unused fec_resume(struct device *dev)
 			goto failed_clk;
 		}
 		if (fep->wol_flag & FEC_WOL_FLAG_ENABLE) {
-			if (pdata && pdata->sleep_mode_enable)
-				pdata->sleep_mode_enable(false);
+			fec_enet_stop_mode(fep, false);
+
 			val = readl(fep->hwp + FEC_ECNTRL);
 			val &= ~(FEC_ECR_MAGICEN | FEC_ECR_SLEEP);
 			writel(val, fep->hwp + FEC_ECNTRL);
-- 
2.20.1

[PATCH AUTOSEL 5.4 03/26] x86: hyperv: report value of misc_features

[Sasha Levin]

From: Olaf Hering <olaf@aepfle.de>

[ Upstream commit 97d9f1c43bedd400301d6f1eff54d46e8c636e47 ]

A few kernel features depend on ms_hyperv.misc_features, but unlike its
siblings ->features and ->hints, the value was never reported during boot.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Link: https://lore.kernel.org/r/20200407172739.31371-1-olaf@aepfle.de
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/cpu/mshyperv.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index fc8814faae62c..1c2f9baf84832 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -227,8 +227,8 @@ static void __init ms_hyperv_init_platform(void)
 	ms_hyperv.misc_features = cpuid_edx(HYPERV_CPUID_FEATURES);
 	ms_hyperv.hints    = cpuid_eax(HYPERV_CPUID_ENLIGHTMENT_INFO);
 
-	pr_info("Hyper-V: features 0x%x, hints 0x%x\n",
-		ms_hyperv.features, ms_hyperv.hints);
+	pr_info("Hyper-V: features 0x%x, hints 0x%x, misc 0x%x\n",
+		ms_hyperv.features, ms_hyperv.hints, ms_hyperv.misc_features);
 
 	ms_hyperv.max_vp_index = cpuid_eax(HYPERV_CPUID_IMPLEMENT_LIMITS);
 	ms_hyperv.max_lp_index = cpuid_ebx(HYPERV_CPUID_IMPLEMENT_LIMITS);
-- 
2.20.1

[PATCH AUTOSEL 5.4 04/26] signal: check sig before setting info in kill_pid_usb_asyncio

[Sasha Levin]

From: Zhiqiang Liu <liuzhiqiang26@huawei.com>

[ Upstream commit eaec2b0bd30690575c581eebffae64bfb7f684ac ]

In kill_pid_usb_asyncio, if signal is not valid, we do not need to
set info struct.

Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/f525fd08-1cf7-fb09-d20c-4359145eb940@huawei.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/signal.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/kernel/signal.c b/kernel/signal.c
index 7d3d35eb7a0ba..3498a009eeac3 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1510,15 +1510,15 @@ int kill_pid_usb_asyncio(int sig, int errno, sigval_t addr,
 	unsigned long flags;
 	int ret = -EINVAL;
 
+	if (!valid_signal(sig))
+		return ret;
+
 	clear_siginfo(&info);
 	info.si_signo = sig;
 	info.si_errno = errno;
 	info.si_code = SI_ASYNCIO;
 	*((sigval_t *)&info.si_pid) = addr;
 
-	if (!valid_signal(sig))
-		return ret;
-
 	rcu_read_lock();
 	p = pid_task(pid, PIDTYPE_PID);
 	if (!p) {
-- 
2.20.1

[PATCH AUTOSEL 5.4 05/26] afs: Fix length of dump of bad YFSFetchStatus record

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 3efe55b09a92a59ed8214db801683cf13c9742c4 ]

Fix the length of the dump of a bad YFSFetchStatus record.  The function
was copied from the AFS version, but the YFS variant contains bigger fields
and extra information, so expand the dump to match.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/yfsclient.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/afs/yfsclient.c b/fs/afs/yfsclient.c
index 31b236c6b1f76..39230880f372b 100644
--- a/fs/afs/yfsclient.c
+++ b/fs/afs/yfsclient.c
@@ -165,15 +165,15 @@ static void xdr_dump_bad(const __be32 *bp)
 	int i;
 
 	pr_notice("YFS XDR: Bad status record\n");
-	for (i = 0; i < 5 * 4 * 4; i += 16) {
+	for (i = 0; i < 6 * 4 * 4; i += 16) {
 		memcpy(x, bp, 16);
 		bp += 4;
 		pr_notice("%03x: %08x %08x %08x %08x\n",
 			  i, ntohl(x[0]), ntohl(x[1]), ntohl(x[2]), ntohl(x[3]));
 	}
 
-	memcpy(x, bp, 4);
-	pr_notice("0x50: %08x\n", ntohl(x[0]));
+	memcpy(x, bp, 8);
+	pr_notice("0x60: %08x %08x\n", ntohl(x[0]), ntohl(x[1]));
 }
 
 /*
-- 
2.20.1

[PATCH AUTOSEL 5.4 06/26] xfs: acquire superblock freeze protection on eofblocks scans

[Sasha Levin]

From: Brian Foster <bfoster@redhat.com>

[ Upstream commit 4b674b9ac852937af1f8c62f730c325fb6eadcdb ]

The filesystem freeze sequence in XFS waits on any background
eofblocks or cowblocks scans to complete before the filesystem is
quiesced. At this point, the freezer has already stopped the
transaction subsystem, however, which means a truncate or cowblock
cancellation in progress is likely blocked in transaction
allocation. This results in a deadlock between freeze and the
associated scanner.

Fix this problem by holding superblock write protection across calls
into the block reapers. Since protection for background scans is
acquired from the workqueue task context, trylock to avoid a similar
deadlock between freeze and blocking on the write lock.

Fixes: d6b636ebb1c9f ("xfs: halt auto-reclamation activities while rebuilding rmap")
Reported-by: Paul Furtado <paulfurtado91@gmail.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/xfs_icache.c | 10 ++++++++++
 fs/xfs/xfs_ioctl.c  |  5 ++++-
 2 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/fs/xfs/xfs_icache.c b/fs/xfs/xfs_icache.c
index 944add5ff8e09..d95dc9b0f0bba 100644
--- a/fs/xfs/xfs_icache.c
+++ b/fs/xfs/xfs_icache.c
@@ -907,7 +907,12 @@ xfs_eofblocks_worker(
 {
 	struct xfs_mount *mp = container_of(to_delayed_work(work),
 				struct xfs_mount, m_eofblocks_work);
+
+	if (!sb_start_write_trylock(mp->m_super))
+		return;
 	xfs_icache_free_eofblocks(mp, NULL);
+	sb_end_write(mp->m_super);
+
 	xfs_queue_eofblocks(mp);
 }
 
@@ -934,7 +939,12 @@ xfs_cowblocks_worker(
 {
 	struct xfs_mount *mp = container_of(to_delayed_work(work),
 				struct xfs_mount, m_cowblocks_work);
+
+	if (!sb_start_write_trylock(mp->m_super))
+		return;
 	xfs_icache_free_cowblocks(mp, NULL);
+	sb_end_write(mp->m_super);
+
 	xfs_queue_cowblocks(mp);
 }
 
diff --git a/fs/xfs/xfs_ioctl.c b/fs/xfs/xfs_ioctl.c
index 2a1909397cb4d..c93c4b7328ef7 100644
--- a/fs/xfs/xfs_ioctl.c
+++ b/fs/xfs/xfs_ioctl.c
@@ -2401,7 +2401,10 @@ xfs_file_ioctl(
 		if (error)
 			return error;
 
-		return xfs_icache_free_eofblocks(mp, &keofb);
+		sb_start_write(mp->m_super);
+		error = xfs_icache_free_eofblocks(mp, &keofb);
+		sb_end_write(mp->m_super);
+		return error;
 	}
 
 	default:
-- 
2.20.1

[PATCH AUTOSEL 5.4 07/26] xfs: fix partially uninitialized structure in xfs_reflink_remap_extent

[Sasha Levin]

From: "Darrick J. Wong" <darrick.wong@oracle.com>

[ Upstream commit c142932c29e533ee892f87b44d8abc5719edceec ]

In the reflink extent remap function, it turns out that uirec (the block
mapping corresponding only to the part of the passed-in mapping that got
unmapped) was not fully initialized.  Specifically, br_state was not
being copied from the passed-in struct to the uirec.  This could lead to
unpredictable results such as the reflinked mapping being marked
unwritten in the destination file.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/xfs_reflink.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/xfs/xfs_reflink.c b/fs/xfs/xfs_reflink.c
index 0f08153b49941..6a4fd1738b086 100644
--- a/fs/xfs/xfs_reflink.c
+++ b/fs/xfs/xfs_reflink.c
@@ -1053,6 +1053,7 @@ xfs_reflink_remap_extent(
 		uirec.br_startblock = irec->br_startblock + rlen;
 		uirec.br_startoff = irec->br_startoff + rlen;
 		uirec.br_blockcount = unmap_len - rlen;
+		uirec.br_state = irec->br_state;
 		unmap_len = rlen;
 
 		/* If this isn't a real mapping, we're done. */
-- 
2.20.1

[PATCH AUTOSEL 5.4 08/26] ALSA: hda: Release resources at error in delayed probe

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 2393e7555b531a534152ffe7bfd1862cacedaacb ]

snd-hda-intel driver handles the most of its probe task in the delayed
work (either via workqueue or via firmware loader).  When an error
happens in the later delayed probe, we can't deregister the device
itself because the probe callback already returned success and the
device was bound.  So, for now, we set hda->init_failed flag and make
the rest untouched until the device gets really unbound.
However, this leaves the device up running, keeping the resources
without any use that prevents other operations.

In this patch, we release the resources at first when a probe error
happens in the delayed probe stage, but keeps the top-level object, so
that the PM and other ops can still refer to the object itself.

Also for simplicity, snd_hda_intel object is allocated via devm, so
that we can get rid of the explicit kfree calls.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Link: https://lore.kernel.org/r/20200413082034.25166-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_intel.c | 29 ++++++++++++++++-------------
 sound/pci/hda/hda_intel.h |  1 +
 2 files changed, 17 insertions(+), 13 deletions(-)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 72bbfeddea24a..2b288c523dce0 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1200,10 +1200,8 @@ static void azx_vs_set_state(struct pci_dev *pci,
 		if (!disabled) {
 			dev_info(chip->card->dev,
 				 "Start delayed initialization\n");
-			if (azx_probe_continue(chip) < 0) {
+			if (azx_probe_continue(chip) < 0)
 				dev_err(chip->card->dev, "initialization error\n");
-				hda->init_failed = true;
-			}
 		}
 	} else {
 		dev_info(chip->card->dev, "%s via vga_switcheroo\n",
@@ -1336,12 +1334,15 @@ static int register_vga_switcheroo(struct azx *chip)
 /*
  * destructor
  */
-static int azx_free(struct azx *chip)
+static void azx_free(struct azx *chip)
 {
 	struct pci_dev *pci = chip->pci;
 	struct hda_intel *hda = container_of(chip, struct hda_intel, chip);
 	struct hdac_bus *bus = azx_bus(chip);
 
+	if (hda->freed)
+		return;
+
 	if (azx_has_pm_runtime(chip) && chip->running)
 		pm_runtime_get_noresume(&pci->dev);
 	chip->running = 0;
@@ -1385,9 +1386,8 @@ static int azx_free(struct azx *chip)
 
 	if (chip->driver_caps & AZX_DCAPS_I915_COMPONENT)
 		snd_hdac_i915_exit(bus);
-	kfree(hda);
 
-	return 0;
+	hda->freed = 1;
 }
 
 static int azx_dev_disconnect(struct snd_device *device)
@@ -1403,7 +1403,8 @@ static int azx_dev_disconnect(struct snd_device *device)
 
 static int azx_dev_free(struct snd_device *device)
 {
-	return azx_free(device->device_data);
+	azx_free(device->device_data);
+	return 0;
 }
 
 #ifdef SUPPORT_VGA_SWITCHEROO
@@ -1717,7 +1718,7 @@ static int azx_create(struct snd_card *card, struct pci_dev *pci,
 	if (err < 0)
 		return err;
 
-	hda = kzalloc(sizeof(*hda), GFP_KERNEL);
+	hda = devm_kzalloc(&pci->dev, sizeof(*hda), GFP_KERNEL);
 	if (!hda) {
 		pci_disable_device(pci);
 		return -ENOMEM;
@@ -1758,7 +1759,6 @@ static int azx_create(struct snd_card *card, struct pci_dev *pci,
 
 	err = azx_bus_init(chip, model[dev]);
 	if (err < 0) {
-		kfree(hda);
 		pci_disable_device(pci);
 		return err;
 	}
@@ -2306,13 +2306,16 @@ static int azx_probe_continue(struct azx *chip)
 		pm_runtime_put_autosuspend(&pci->dev);
 
 out_free:
-	if (err < 0 || !hda->need_i915_power)
+	if (err < 0) {
+		azx_free(chip);
+		return err;
+	}
+
+	if (!hda->need_i915_power)
 		display_power(chip, false);
-	if (err < 0)
-		hda->init_failed = 1;
 	complete_all(&hda->probe_wait);
 	to_hda_bus(bus)->bus_probing = 0;
-	return err;
+	return 0;
 }
 
 static void azx_remove(struct pci_dev *pci)
diff --git a/sound/pci/hda/hda_intel.h b/sound/pci/hda/hda_intel.h
index 2acfff3da1a04..3fb119f090408 100644
--- a/sound/pci/hda/hda_intel.h
+++ b/sound/pci/hda/hda_intel.h
@@ -27,6 +27,7 @@ struct hda_intel {
 	unsigned int use_vga_switcheroo:1;
 	unsigned int vga_switcheroo_registered:1;
 	unsigned int init_failed:1; /* delayed init failed */
+	unsigned int freed:1; /* resources already released */
 
 	bool need_i915_power:1; /* the hda controller needs i915 power */
 };
-- 
2.20.1

[PATCH AUTOSEL 5.4 09/26] ALSA: hda: Keep the controller initialization even if no codecs found

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 9479e75fca370a5220784f7596bf598c4dad0b9b ]

Currently, when the HD-audio controller driver doesn't detect any
codecs, it tries to abort the probe.  But this abort happens at the
delayed probe, i.e. the primary probe call already returned success,
hence the driver is never unbound until user does so explicitly.
As a result, it may leave the HD-audio device in the running state
without the runtime PM.  More badly, if the device is a HD-audio bus
that is tied with a GPU, GPU cannot reach to the full power down and
consumes unnecessarily much power.

This patch changes the logic after no-codec situation; it continues
probing without the further codec initialization but keep the
controller driver running normally.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Tested-by: Roy Spliet <nouveau@spliet.org>
Link: https://lore.kernel.org/r/20200413082034.25166-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_intel.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 2b288c523dce0..6ccf34840e8a1 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1958,7 +1958,7 @@ static int azx_first_init(struct azx *chip)
 	/* codec detection */
 	if (!azx_bus(chip)->codec_mask) {
 		dev_err(card->dev, "no codecs found!\n");
-		return -ENODEV;
+		/* keep running the rest for the runtime PM */
 	}
 
 	if (azx_acquire_irq(chip, 0) < 0)
@@ -2269,9 +2269,11 @@ static int azx_probe_continue(struct azx *chip)
 #endif
 
 	/* create codec instances */
-	err = azx_probe_codecs(chip, azx_max_codecs[chip->driver_type]);
-	if (err < 0)
-		goto out_free;
+	if (bus->codec_mask) {
+		err = azx_probe_codecs(chip, azx_max_codecs[chip->driver_type]);
+		if (err < 0)
+			goto out_free;
+	}
 
 #ifdef CONFIG_SND_HDA_PATCH_LOADER
 	if (chip->fw) {
@@ -2285,7 +2287,7 @@ static int azx_probe_continue(struct azx *chip)
 #endif
 	}
 #endif
-	if ((probe_only[dev] & 1) == 0) {
+	if (bus->codec_mask && !(probe_only[dev] & 1)) {
 		err = azx_codec_configure(chip);
 		if (err < 0)
 			goto out_free;
-- 
2.20.1

[PATCH AUTOSEL 5.4 10/26] ALSA: hda: Skip controller resume if not needed

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit c4c8dd6ef807663e42a5f04ea77cd62029eb99fa ]

The HD-audio controller does system-suspend and resume operations by
directly calling its helpers __azx_runtime_suspend() and
__azx_runtime_resume().  However, in general, we don't have to resume
always the device fully at the system resume; typically, if a device
has been runtime-suspended, we can leave it to runtime resume.

Usually for achieving this, the driver would call
pm_runtime_force_suspend() and pm_runtime_force_resume() pairs in the
system suspend and resume ops.  Unfortunately, this doesn't work for
the resume path in our case.  For handling the jack detection at the
system resume, a child codec device may need the (literally) forcibly
resume even if it's been runtime-suspended, and for that, the
controller device must be also resumed even if it's been suspended.

This patch is an attempt to improve the situation.  It replaces the
direct __azx_runtime_suspend()/_resume() calls with with
pm_runtime_force_suspend() and pm_runtime_force_resume() with a slight
trick as we've done for the codec side.  More exactly:

- azx_has_pm_runtime() check is dropped from azx_runtime_suspend() and
  azx_runtime_resume(), so that it can be properly executed from the
  system-suspend/resume path

- The WAKEEN handling depends on the card's power state now; it's set
  and cleared only for the runtime-suspend

- azx_resume() checks whether any codec may need the forcible resume
  beforehand.  If the forcible resume is required, it does temporary
  PM refcount up/down for actually triggering the runtime resume.

- A new helper function, hda_codec_need_resume(), is introduced for
  checking whether the codec needs a forcible runtime-resume, and the
  existing code is rewritten with that.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Link: https://lore.kernel.org/r/20200413082034.25166-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/sound/hda_codec.h |  5 +++++
 sound/pci/hda/hda_codec.c |  2 +-
 sound/pci/hda/hda_intel.c | 38 +++++++++++++++++++++++++++-----------
 3 files changed, 33 insertions(+), 12 deletions(-)

diff --git a/include/sound/hda_codec.h b/include/sound/hda_codec.h
index 9a0393cf024c2..65c056ce91128 100644
--- a/include/sound/hda_codec.h
+++ b/include/sound/hda_codec.h
@@ -494,6 +494,11 @@ void snd_hda_update_power_acct(struct hda_codec *codec);
 static inline void snd_hda_set_power_save(struct hda_bus *bus, int delay) {}
 #endif
 
+static inline bool hda_codec_need_resume(struct hda_codec *codec)
+{
+	return !codec->relaxed_resume && codec->jacktbl.used;
+}
+
 #ifdef CONFIG_SND_HDA_PATCH_LOADER
 /*
  * patch firmware
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 6cb72336433ad..1bc45c8507858 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -2948,7 +2948,7 @@ static int hda_codec_runtime_resume(struct device *dev)
 static int hda_codec_force_resume(struct device *dev)
 {
 	struct hda_codec *codec = dev_to_hda_codec(dev);
-	bool forced_resume = !codec->relaxed_resume && codec->jacktbl.used;
+	bool forced_resume = hda_codec_need_resume(codec);
 	int ret;
 
 	/* The get/put pair below enforces the runtime resume even if the
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 6ccf34840e8a1..4604d1e16150d 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1025,7 +1025,7 @@ static int azx_suspend(struct device *dev)
 	chip = card->private_data;
 	bus = azx_bus(chip);
 	snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
-	__azx_runtime_suspend(chip);
+	pm_runtime_force_suspend(dev);
 	if (bus->irq >= 0) {
 		free_irq(bus->irq, chip);
 		bus->irq = -1;
@@ -1041,7 +1041,9 @@ static int azx_suspend(struct device *dev)
 static int azx_resume(struct device *dev)
 {
 	struct snd_card *card = dev_get_drvdata(dev);
+	struct hda_codec *codec;
 	struct azx *chip;
+	bool forced_resume = false;
 
 	if (!azx_is_pm_ready(card))
 		return 0;
@@ -1052,7 +1054,20 @@ static int azx_resume(struct device *dev)
 			chip->msi = 0;
 	if (azx_acquire_irq(chip, 1) < 0)
 		return -EIO;
-	__azx_runtime_resume(chip, false);
+
+	/* check for the forced resume */
+	list_for_each_codec(codec, &chip->bus) {
+		if (hda_codec_need_resume(codec)) {
+			forced_resume = true;
+			break;
+		}
+	}
+
+	if (forced_resume)
+		pm_runtime_get_noresume(dev);
+	pm_runtime_force_resume(dev);
+	if (forced_resume)
+		pm_runtime_put(dev);
 	snd_power_change_state(card, SNDRV_CTL_POWER_D0);
 
 	trace_azx_resume(chip);
@@ -1099,12 +1114,12 @@ static int azx_runtime_suspend(struct device *dev)
 	if (!azx_is_pm_ready(card))
 		return 0;
 	chip = card->private_data;
-	if (!azx_has_pm_runtime(chip))
-		return 0;
 
 	/* enable controller wake up event */
-	azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) |
-		  STATESTS_INT_MASK);
+	if (snd_power_get_state(card) == SNDRV_CTL_POWER_D0) {
+		azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) |
+			   STATESTS_INT_MASK);
+	}
 
 	__azx_runtime_suspend(chip);
 	trace_azx_runtime_suspend(chip);
@@ -1115,17 +1130,18 @@ static int azx_runtime_resume(struct device *dev)
 {
 	struct snd_card *card = dev_get_drvdata(dev);
 	struct azx *chip;
+	bool from_rt = snd_power_get_state(card) == SNDRV_CTL_POWER_D0;
 
 	if (!azx_is_pm_ready(card))
 		return 0;
 	chip = card->private_data;
-	if (!azx_has_pm_runtime(chip))
-		return 0;
-	__azx_runtime_resume(chip, true);
+	__azx_runtime_resume(chip, from_rt);
 
 	/* disable controller Wake Up event*/
-	azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) &
-			~STATESTS_INT_MASK);
+	if (from_rt) {
+		azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) &
+			   ~STATESTS_INT_MASK);
+	}
 
 	trace_azx_runtime_resume(chip);
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 5.4 11/26] ALSA: hda: Explicitly permit using autosuspend if runtime PM is supported

[Sasha Levin]

From: Roy Spliet <nouveau@spliet.org>

[ Upstream commit 3ba21113bd33d49f3c300a23fc08cf114c434995 ]

This fixes runtime PM not working after a suspend-to-RAM cycle at least for
the codec-less HDA device found on NVIDIA GPUs.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Signed-off-by: Roy Spliet <nouveau@spliet.org>
Link: https://lore.kernel.org/r/20200413082034.25166-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_intel.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 4604d1e16150d..9f77713c36de6 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2320,8 +2320,10 @@ static int azx_probe_continue(struct azx *chip)
 
 	set_default_power_save(chip);
 
-	if (azx_has_pm_runtime(chip))
+	if (azx_has_pm_runtime(chip)) {
+		pm_runtime_use_autosuspend(&pci->dev);
 		pm_runtime_put_autosuspend(&pci->dev);
+	}
 
 out_free:
 	if (err < 0) {
-- 
2.20.1

[PATCH AUTOSEL 5.4 12/26] scsi: target: fix PR IN / READ FULL STATUS for FC

[Sasha Levin]

From: Bodo Stroesser <bstroesser@ts.fujitsu.com>

[ Upstream commit 8fed04eb79a74cbf471dfaa755900a51b37273ab ]

Creation of the response to READ FULL STATUS fails for FC based
reservations. Reason is the too high loop limit (< 24) in
fc_get_pr_transport_id(). The string representation of FC WWPN is 23 chars
long only ("11:22:33:44:55:66:77:88"). So when i is 23, the loop body is
executed a last time for the ending '\0' of the string and thus hex2bin()
reports an error.

Link: https://lore.kernel.org/r/20200408132610.14623-3-bstroesser@ts.fujitsu.com
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_fabric_lib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/target/target_core_fabric_lib.c b/drivers/target/target_core_fabric_lib.c
index 6b4b354c88aa0..b5c970faf5854 100644
--- a/drivers/target/target_core_fabric_lib.c
+++ b/drivers/target/target_core_fabric_lib.c
@@ -63,7 +63,7 @@ static int fc_get_pr_transport_id(
 	 * encoded TransportID.
 	 */
 	ptr = &se_nacl->initiatorname[0];
-	for (i = 0; i < 24; ) {
+	for (i = 0; i < 23; ) {
 		if (!strncmp(&ptr[i], ":", 1)) {
 			i++;
 			continue;
-- 
2.20.1

[PATCH AUTOSEL 5.4 13/26] scsi: target: tcmu: reset_ring should reset TCMU_DEV_BIT_BROKEN

[Sasha Levin]

From: Bodo Stroesser <bstroesser@ts.fujitsu.com>

[ Upstream commit 066f79a5fd6d1b9a5cc57b5cd445b3e4bb68a5b2 ]

In case command ring buffer becomes inconsistent, tcmu sets device flag
TCMU_DEV_BIT_BROKEN.  If the bit is set, tcmu rejects new commands from LIO
core with TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE, and no longer processes
completions from the ring.  The reset_ring attribute can be used to
completely clean up the command ring, so after reset_ring the ring no
longer is inconsistent.

Therefore reset_ring also should reset bit TCMU_DEV_BIT_BROKEN to allow
normal processing.

Link: https://lore.kernel.org/r/20200409101026.17872-1-bstroesser@ts.fujitsu.com
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_user.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c
index 35be1be87d2a1..9425354aef99c 100644
--- a/drivers/target/target_core_user.c
+++ b/drivers/target/target_core_user.c
@@ -2073,6 +2073,7 @@ static void tcmu_reset_ring(struct tcmu_dev *udev, u8 err_level)
 	mb->cmd_tail = 0;
 	mb->cmd_head = 0;
 	tcmu_flush_dcache_range(mb, sizeof(*mb));
+	clear_bit(TCMU_DEV_BIT_BROKEN, &udev->flags);
 
 	del_timer(&udev->cmd_timer);
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 14/26] objtool: Fix CONFIG_UBSAN_TRAP unreachable warnings

[Sasha Levin]

From: Josh Poimboeuf <jpoimboe@redhat.com>

[ Upstream commit bd841d6154f5f41f8a32d3c1b0bc229e326e640a ]

CONFIG_UBSAN_TRAP causes GCC to emit a UD2 whenever it encounters an
unreachable code path.  This includes __builtin_unreachable().  Because
the BUG() macro uses __builtin_unreachable() after it emits its own UD2,
this results in a double UD2.  In this case objtool rightfully detects
that the second UD2 is unreachable:

  init/main.o: warning: objtool: repair_env_string()+0x1c8: unreachable instruction

We weren't able to figure out a way to get rid of the double UD2s, so
just silence the warning.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/6653ad73c6b59c049211bd7c11ed3809c20ee9f5.1585761021.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/objtool/check.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index 9fa4e1a46ca95..d6a971326f879 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -2306,14 +2306,27 @@ static bool ignore_unreachable_insn(struct instruction *insn)
 	    !strcmp(insn->sec->name, ".altinstr_aux"))
 		return true;
 
+	if (!insn->func)
+		return false;
+
+	/*
+	 * CONFIG_UBSAN_TRAP inserts a UD2 when it sees
+	 * __builtin_unreachable().  The BUG() macro has an unreachable() after
+	 * the UD2, which causes GCC's undefined trap logic to emit another UD2
+	 * (or occasionally a JMP to UD2).
+	 */
+	if (list_prev_entry(insn, list)->dead_end &&
+	    (insn->type == INSN_BUG ||
+	     (insn->type == INSN_JUMP_UNCONDITIONAL &&
+	      insn->jump_dest && insn->jump_dest->type == INSN_BUG)))
+		return true;
+
 	/*
 	 * Check if this (or a subsequent) instruction is related to
 	 * CONFIG_UBSAN or CONFIG_KASAN.
 	 *
 	 * End the search at 5 instructions to avoid going into the weeds.
 	 */
-	if (!insn->func)
-		return false;
 	for (i = 0; i < 5; i++) {
 
 		if (is_kasan_insn(insn) || is_ubsan_insn(insn))
-- 
2.20.1

[PATCH AUTOSEL 5.4 15/26] objtool: Support Clang non-section symbols in ORC dump

[Sasha Levin]

From: Josh Poimboeuf <jpoimboe@redhat.com>

[ Upstream commit 8782e7cab51b6bf01a5a86471dd82228af1ac185 ]

Historically, the relocation symbols for ORC entries have only been
section symbols:

  .text+0: sp:sp+8 bp:(und) type:call end:0

However, the Clang assembler is aggressive about stripping section
symbols.  In that case we will need to use function symbols:

  freezing_slow_path+0: sp:sp+8 bp:(und) type:call end:0

In preparation for the generation of such entries in "objtool orc
generate", add support for reading them in "objtool orc dump".

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/b811b5eb1a42602c3b523576dc5efab9ad1c174d.1585761021.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/objtool/orc_dump.c | 44 ++++++++++++++++++++++++----------------
 1 file changed, 27 insertions(+), 17 deletions(-)

diff --git a/tools/objtool/orc_dump.c b/tools/objtool/orc_dump.c
index 13ccf775a83a4..ba4cbb1cdd632 100644
--- a/tools/objtool/orc_dump.c
+++ b/tools/objtool/orc_dump.c
@@ -66,7 +66,7 @@ int orc_dump(const char *_objname)
 	char *name;
 	size_t nr_sections;
 	Elf64_Addr orc_ip_addr = 0;
-	size_t shstrtab_idx;
+	size_t shstrtab_idx, strtab_idx = 0;
 	Elf *elf;
 	Elf_Scn *scn;
 	GElf_Shdr sh;
@@ -127,6 +127,8 @@ int orc_dump(const char *_objname)
 
 		if (!strcmp(name, ".symtab")) {
 			symtab = data;
+		} else if (!strcmp(name, ".strtab")) {
+			strtab_idx = i;
 		} else if (!strcmp(name, ".orc_unwind")) {
 			orc = data->d_buf;
 			orc_size = sh.sh_size;
@@ -138,7 +140,7 @@ int orc_dump(const char *_objname)
 		}
 	}
 
-	if (!symtab || !orc || !orc_ip)
+	if (!symtab || !strtab_idx || !orc || !orc_ip)
 		return 0;
 
 	if (orc_size % sizeof(*orc) != 0) {
@@ -159,21 +161,29 @@ int orc_dump(const char *_objname)
 				return -1;
 			}
 
-			scn = elf_getscn(elf, sym.st_shndx);
-			if (!scn) {
-				WARN_ELF("elf_getscn");
-				return -1;
-			}
-
-			if (!gelf_getshdr(scn, &sh)) {
-				WARN_ELF("gelf_getshdr");
-				return -1;
-			}
-
-			name = elf_strptr(elf, shstrtab_idx, sh.sh_name);
-			if (!name || !*name) {
-				WARN_ELF("elf_strptr");
-				return -1;
+			if (GELF_ST_TYPE(sym.st_info) == STT_SECTION) {
+				scn = elf_getscn(elf, sym.st_shndx);
+				if (!scn) {
+					WARN_ELF("elf_getscn");
+					return -1;
+				}
+
+				if (!gelf_getshdr(scn, &sh)) {
+					WARN_ELF("gelf_getshdr");
+					return -1;
+				}
+
+				name = elf_strptr(elf, shstrtab_idx, sh.sh_name);
+				if (!name) {
+					WARN_ELF("elf_strptr");
+					return -1;
+				}
+			} else {
+				name = elf_strptr(elf, strtab_idx, sym.st_name);
+				if (!name) {
+					WARN_ELF("elf_strptr");
+					return -1;
+				}
 			}
 
 			printf("%s+%llx:", name, (unsigned long long)rela.r_addend);
-- 
2.20.1

[PATCH AUTOSEL 5.4 16/26] xen/xenbus: ensure xenbus_map_ring_valloc() returns proper grant status

[Sasha Levin]

From: Juergen Gross <jgross@suse.com>

[ Upstream commit 6b51fd3f65a22e3d1471b18a1d56247e246edd46 ]

xenbus_map_ring_valloc() maps a ring page and returns the status of the
used grant (0 meaning success).

There are Xen hypervisors which might return the value 1 for the status
of a failed grant mapping due to a bug. Some callers of
xenbus_map_ring_valloc() test for errors by testing the returned status
to be less than zero, resulting in no error detected and crashing later
due to a not available ring page.

Set the return value of xenbus_map_ring_valloc() to GNTST_general_error
in case the grant status reported by Xen is greater than zero.

This is part of XSA-316.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
Link: https://lore.kernel.org/r/20200326080358.1018-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/xenbus/xenbus_client.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/xen/xenbus/xenbus_client.c b/drivers/xen/xenbus/xenbus_client.c
index e17ca81561713..a38292ef79f6d 100644
--- a/drivers/xen/xenbus/xenbus_client.c
+++ b/drivers/xen/xenbus/xenbus_client.c
@@ -448,7 +448,14 @@ EXPORT_SYMBOL_GPL(xenbus_free_evtchn);
 int xenbus_map_ring_valloc(struct xenbus_device *dev, grant_ref_t *gnt_refs,
 			   unsigned int nr_grefs, void **vaddr)
 {
-	return ring_ops->map(dev, gnt_refs, nr_grefs, vaddr);
+	int err;
+
+	err = ring_ops->map(dev, gnt_refs, nr_grefs, vaddr);
+	/* Some hypervisors are buggy and can return 1. */
+	if (err > 0)
+		err = GNTST_general_error;
+
+	return err;
 }
 EXPORT_SYMBOL_GPL(xenbus_map_ring_valloc);
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 17/26] ALSA: hda: call runtime_allow() for all hda controllers

[Sasha Levin]

From: Hui Wang <hui.wang@canonical.com>

[ Upstream commit 9a6418487b566503c772cb6e7d3d44e652b019b0 ]

Before the pci_driver->probe() is called, the pci subsystem calls
runtime_forbid() and runtime_get_sync() on this pci dev, so only call
runtime_put_autosuspend() is not enough to enable the runtime_pm on
this device.

For controllers with vgaswitcheroo feature, the pci/quirks.c will call
runtime_allow() for this dev, then the controllers could enter
rt_idle/suspend/resume, but for non-vgaswitcheroo controllers like
Intel hda controllers, the runtime_pm is not enabled because the
runtime_allow() is not called.

Since it is no harm calling runtime_allow() twice, here let hda
driver call runtime_allow() for all controllers. Then the runtime_pm
is enabled on all controllers after the put_autosuspend() is called.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20200414142725.6020-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_intel.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 9f77713c36de6..1129ec1f038a7 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2322,6 +2322,7 @@ static int azx_probe_continue(struct azx *chip)
 
 	if (azx_has_pm_runtime(chip)) {
 		pm_runtime_use_autosuspend(&pci->dev);
+		pm_runtime_allow(&pci->dev);
 		pm_runtime_put_autosuspend(&pci->dev);
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 18/26] net: stmmac: socfpga: Allow all RGMII modes

[Sasha Levin]

From: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>

[ Upstream commit a7a0d6269652846671312b29992143f56e2866b8 ]

Allow all the RGMII modes to be used.  (Not only "rgmii", "rgmii-id"
but "rgmii-txid", "rgmii-rxid")

Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index e0212d2fc2a12..fa32cd5b418ef 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -241,6 +241,8 @@ static int socfpga_set_phy_mode_common(int phymode, u32 *val)
 	switch (phymode) {
 	case PHY_INTERFACE_MODE_RGMII:
 	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
 		*val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII;
 		break;
 	case PHY_INTERFACE_MODE_MII:
-- 
2.20.1

[PATCH AUTOSEL 5.4 19/26] net/cxgb4: Check the return from t4_query_params properly

[Sasha Levin]

From: Jason Gunthorpe <jgg@mellanox.com>

[ Upstream commit c799fca8baf18d1bbbbad6c3b736eefbde8bdb90 ]

Positive return values are also failures that don't set val,
although this probably can't happen. Fixes gcc 10 warning:

drivers/net/ethernet/chelsio/cxgb4/t4_hw.c: In function ‘t4_phy_fw_ver’:
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:3747:14: warning: ‘val’ may be used uninitialized in this function [-Wmaybe-uninitialized]
 3747 |  *phy_fw_ver = val;

Fixes: 01b6961410b7 ("cxgb4: Add PHY firmware support for T420-BT cards")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 3f6813daf3c10..31fcfc58e3373 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -3748,7 +3748,7 @@ int t4_phy_fw_ver(struct adapter *adap, int *phy_fw_ver)
 		 FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_VERSION));
 	ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1,
 			      &param, &val);
-	if (ret < 0)
+	if (ret)
 		return ret;
 	*phy_fw_ver = val;
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 5.4 20/26] mac80211: fix channel switch trigger from unknown mesh peer

[Sasha Levin]

From: Tamizh chelvam <tamizhr@codeaurora.org>

[ Upstream commit 93e2d04a1888668183f3fb48666e90b9b31d29e6 ]

Previously mesh channel switch happens if beacon contains
CSA IE without checking the mesh peer info. Due to that
channel switch happens even if the beacon is not from
its own mesh peer. Fixing that by checking if the CSA
originated from the same mesh network before proceeding
for channel switch.

Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Link: https://lore.kernel.org/r/1585403604-29274-1-git-send-email-tamizhr@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mesh.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index d09b3c789314d..36978a0e50001 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -1257,15 +1257,15 @@ static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
 		    sdata->u.mesh.mshcfg.rssi_threshold < rx_status->signal)
 			mesh_neighbour_update(sdata, mgmt->sa, &elems,
 					      rx_status);
+
+		if (ifmsh->csa_role != IEEE80211_MESH_CSA_ROLE_INIT &&
+		    !sdata->vif.csa_active)
+			ieee80211_mesh_process_chnswitch(sdata, &elems, true);
 	}
 
 	if (ifmsh->sync_ops)
 		ifmsh->sync_ops->rx_bcn_presp(sdata,
 			stype, mgmt, &elems, rx_status);
-
-	if (ifmsh->csa_role != IEEE80211_MESH_CSA_ROLE_INIT &&
-	    !sdata->vif.csa_active)
-		ieee80211_mesh_process_chnswitch(sdata, &elems, true);
 }
 
 int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata)
@@ -1373,6 +1373,9 @@ static void mesh_rx_csa_frame(struct ieee80211_sub_if_data *sdata,
 	ieee802_11_parse_elems(pos, len - baselen, true, &elems,
 			       mgmt->bssid, NULL);
 
+	if (!mesh_matches_local(sdata, &elems))
+		return;
+
 	ifmsh->chsw_ttl = elems.mesh_chansw_params_ie->mesh_ttl;
 	if (!--ifmsh->chsw_ttl)
 		fwd_csa = false;
-- 
2.20.1

[PATCH AUTOSEL 5.4 21/26] arm64: Delete the space separator in __emit_inst

[Sasha Levin]

From: Fangrui Song <maskray@google.com>

[ Upstream commit c9a4ef66450145a356a626c833d3d7b1668b3ded ]

In assembly, many instances of __emit_inst(x) expand to a directive. In
a few places __emit_inst(x) is used as an assembler macro argument. For
example, in arch/arm64/kvm/hyp/entry.S

  ALTERNATIVE(nop, SET_PSTATE_PAN(1), ARM64_HAS_PAN, CONFIG_ARM64_PAN)

expands to the following by the C preprocessor:

  alternative_insn nop, .inst (0xd500401f | ((0) << 16 | (4) << 5) | ((!!1) << 8)), 4, 1

Both comma and space are separators, with an exception that content
inside a pair of parentheses/quotes is not split, so the clang
integrated assembler splits the arguments to:

   nop, .inst, (0xd500401f | ((0) << 16 | (4) << 5) | ((!!1) << 8)), 4, 1

GNU as preprocesses the input with do_scrub_chars(). Its arm64 backend
(along with many other non-x86 backends) sees:

  alternative_insn nop,.inst(0xd500401f|((0)<<16|(4)<<5)|((!!1)<<8)),4,1
  # .inst(...) is parsed as one argument

while its x86 backend sees:

  alternative_insn nop,.inst (0xd500401f|((0)<<16|(4)<<5)|((!!1)<<8)),4,1
  # The extra space before '(' makes the whole .inst (...) parsed as two arguments

The non-x86 backend's behavior is considered unintentional
(https://sourceware.org/bugzilla/show_bug.cgi?id=25750).
So drop the space separator inside `.inst (...)` to make the clang
integrated assembler work.

Suggested-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Fangrui Song <maskray@google.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/939
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/sysreg.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 6e919fafb43dd..9b68f1b3915ec 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -49,7 +49,9 @@
 #ifndef CONFIG_BROKEN_GAS_INST
 
 #ifdef __ASSEMBLY__
-#define __emit_inst(x)			.inst (x)
+// The space separator is omitted so that __emit_inst(x) can be parsed as
+// either an assembler directive or an assembler macro argument.
+#define __emit_inst(x)			.inst(x)
 #else
 #define __emit_inst(x)			".inst " __stringify((x)) "\n\t"
 #endif
-- 
2.20.1

[PATCH AUTOSEL 5.4 22/26] ext4: use matching invalidatepage in ext4_writepage

[Sasha Levin]

From: yangerkun <yangerkun@huawei.com>

[ Upstream commit c2a559bc0e7ed5a715ad6b947025b33cb7c05ea7 ]

Run generic/388 with journal data mode sometimes may trigger the warning
in ext4_invalidatepage. Actually, we should use the matching invalidatepage
in ext4_writepage.

Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200226041002.13914-1-yangerkun@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/inode.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index b9473fcc110fd..7e0c77de551bb 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2131,7 +2131,7 @@ static int ext4_writepage(struct page *page,
 	bool keep_towrite = false;
 
 	if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb)))) {
-		ext4_invalidatepage(page, 0, PAGE_SIZE);
+		inode->i_mapping->a_ops->invalidatepage(page, 0, PAGE_SIZE);
 		unlock_page(page);
 		return -EIO;
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.4 23/26] ext4: increase wait time needed before reuse of deleted inode numbers

[Sasha Levin]

From: Theodore Ts'o <tytso@mit.edu>

[ Upstream commit a17a9d935dc4a50acefaf319d58030f1da7f115a ]

Current wait times have proven to be too short to protect against inode
reuses that lead to metadata inconsistencies.

Now that we will retry the inode allocation if we can't find any
recently deleted inodes, it's a lot safer to increase the recently
deleted time from 5 seconds to a minute.

Link: https://lore.kernel.org/r/20200414023925.273867-1-tytso@mit.edu
Google-Bug-Id: 36602237
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/ialloc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index a6288730210e8..64b6549dd9016 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -660,7 +660,7 @@ static int find_group_other(struct super_block *sb, struct inode *parent,
  * block has been written back to disk.  (Yes, these values are
  * somewhat arbitrary...)
  */
-#define RECENTCY_MIN	5
+#define RECENTCY_MIN	60
 #define RECENTCY_DIRTY	300
 
 static int recently_deleted(struct super_block *sb, ext4_group_t group, int ino)
-- 
2.20.1

[PATCH AUTOSEL 5.4 24/26] ext4: convert BUG_ON's to WARN_ON's in mballoc.c

[Sasha Levin]

From: Theodore Ts'o <tytso@mit.edu>

[ Upstream commit 907ea529fc4c3296701d2bfc8b831dd2a8121a34 ]

If the in-core buddy bitmap gets corrupted (or out of sync with the
block bitmap), issue a WARN_ON and try to recover.  In most cases this
involves skipping trying to allocate out of a particular block group.
We can end up declaring the file system corrupted, which is fair,
since the file system probably should be checked before we proceed any
further.

Link: https://lore.kernel.org/r/20200414035649.293164-1-tytso@mit.edu
Google-Bug-Id: 34811296
Google-Bug-Id: 34639169
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/mballoc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index c76ffc259d197..e1782b2e2e2dd 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -1936,7 +1936,8 @@ void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
 	int free;
 
 	free = e4b->bd_info->bb_free;
-	BUG_ON(free <= 0);
+	if (WARN_ON(free <= 0))
+		return;
 
 	i = e4b->bd_info->bb_first_free;
 
@@ -1959,7 +1960,8 @@ void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
 		}
 
 		mb_find_extent(e4b, i, ac->ac_g_ex.fe_len, &ex);
-		BUG_ON(ex.fe_len <= 0);
+		if (WARN_ON(ex.fe_len <= 0))
+			break;
 		if (free < ex.fe_len) {
 			ext4_grp_locked_error(sb, e4b->bd_group, 0, 0,
 					"%d free clusters as per "
-- 
2.20.1

[PATCH AUTOSEL 5.4 25/26] blk-mq: Put driver tag in blk_mq_dispatch_rq_list() when no budget

[Sasha Levin]

From: John Garry <john.garry@huawei.com>

[ Upstream commit 5fe56de799ad03e92d794c7936bf363922b571df ]

If in blk_mq_dispatch_rq_list() we find no budget, then we break of the
dispatch loop, but the request may keep the driver tag, evaulated
in 'nxt' in the previous loop iteration.

Fix by putting the driver tag for that request.

Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-mq.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/block/blk-mq.c b/block/blk-mq.c
index a8c1a45cedde0..757c0fd9f0cc2 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1232,8 +1232,10 @@ bool blk_mq_dispatch_rq_list(struct request_queue *q, struct list_head *list,
 		rq = list_first_entry(list, struct request, queuelist);
 
 		hctx = rq->mq_hctx;
-		if (!got_budget && !blk_mq_get_dispatch_budget(hctx))
+		if (!got_budget && !blk_mq_get_dispatch_budget(hctx)) {
+			blk_mq_put_driver_tag(rq);
 			break;
+		}
 
 		if (!blk_mq_get_driver_tag(rq)) {
 			/*
-- 
2.20.1

[PATCH AUTOSEL 5.4 26/26] hwmon: (jc42) Fix name to have no illegal characters

[Sasha Levin]

From: Sascha Hauer <s.hauer@pengutronix.de>

[ Upstream commit c843b382e61b5f28a3d917712c69a344f632387c ]

The jc42 driver passes I2C client's name as hwmon device name. In case
of device tree probed devices this ends up being part of the compatible
string, "jc-42.4-temp". This name contains hyphens and the hwmon core
doesn't like this:

jc42 2-0018: hwmon: 'jc-42.4-temp' is not a valid name attribute, please fix

This changes the name to "jc42" which doesn't have any illegal
characters.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20200417092853.31206-1-s.hauer@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/jc42.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index f2d81b0558e56..e3f1ebee71306 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -506,7 +506,7 @@ static int jc42_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	}
 	data->config = config;
 
-	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, "jc42",
 							 data, &jc42_chip_info,
 							 NULL);
 	return PTR_ERR_OR_ZERO(hwmon_dev);
-- 
2.20.1