From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Konrad Dybcio <konradybcio@gmail.com>
Cc: skrzynka@konradybcio.pl, Andy Gross <agross@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Kees Cook <keescook@chromium.org>,
Anton Vorontsov <anton@enomsg.org>,
Colin Cross <ccross@android.com>, Tony Luck <tony.luck@intel.com>,
linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-gpio@vger.kernel.org,
Martin Botka <martin.botka1@gmail.com>
Subject: Re: [PATCH v2 8/8] arm64: dts: qcom: Add support for Sony Xperia 10/10 Plus (Ganges platform)
Date: Mon, 22 Jun 2020 10:54:28 -0700 [thread overview]
Message-ID: <20200622175428.GU128451@builder.lan> (raw)
In-Reply-To: <20200622075749.21925-9-konradybcio@gmail.com>
On Mon 22 Jun 00:57 PDT 2020, Konrad Dybcio wrote:
> From: Martin Botka <martin.botka1@gmail.com>
>
> Add device tree support for the Sony Xperia 10 and 10
> Plus smartphones. They are all based on the Sony Ganges
> platform (sdm630/636) and share a lot of common code.
> The differences are really minor, so a Ganges-common DTSI
> has been created to reduce clutter.
>
> 10 - Kirin
> 10 Plus - Mermaid
>
> This platform is based on SoMC Nile, but there are some
> major differences when it comes to pin configuration and
> panel setup (among others).
>
> The boards currently support:
> * Screen console
> * SDHCI
> * I2C
> * pstore log dump
> * GPIO keys
> * PSCI idle states
>
> Signed-off-by: Martin Botka <martin.botka1@gmail.com>
> Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
> Tested-by: Martin Botka <martin.botka1@gmail.com>
Same comments as on patch 7 regarding the model, but apart from that
this looks good.
Happy to see these patches on the list, keep up the good work!
Regards,
Bjorn
> ---
> arch/arm64/boot/dts/qcom/Makefile | 2 +
> .../qcom/sdm630-sony-xperia-ganges-kirin.dts | 13 ++++++
> .../dts/qcom/sdm630-sony-xperia-ganges.dtsi | 40 +++++++++++++++++++
> .../sdm636-sony-xperia-ganges-mermaid.dts | 20 ++++++++++
> 4 files changed, 75 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts
> create mode 100644 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi
> create mode 100644 arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 1cad7cb07574..c98bafe03a96 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -16,9 +16,11 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-voyager.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sdm636-sony-xperia-ganges-mermaid.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts
> new file mode 100644
> index 000000000000..246710a01046
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts
> @@ -0,0 +1,13 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2020, Martin Botka
> + */
> +
> +/dts-v1/;
> +
> +#include "sdm630-sony-xperia-ganges.dtsi"
> +
> +/ {
> + model = "SoMC Kirin-RoW";
> + compatible = "sony,kirin-row", "qcom,sdm630", "qcom,sdm630-mtp";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi
> new file mode 100644
> index 000000000000..ea051b3d14b8
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi
> @@ -0,0 +1,40 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2020, Martin Botka
> + */
> +
> +/dts-v1/;
> +
> +/* Ganges is very similar to Nile, but
> + * there are some differences that will need
> + * to be addresed when more peripherals are
> + * enabled upstream. Hence the separate DTSI.
> + */
> +#include "sdm630-sony-xperia-nile.dtsi"
> +
> +/ {
> + chosen {
> + framebuffer@9d400000 {
> + reg = <0 0x9d400000 0 (2520 * 1080 * 4)>;
> + height = <2520>;
> + };
> + };
> +
> + soc {
> +
> + i2c@c175000 {
> + status = "okay";
> +
> + /* Novatek touchscreen */
> + };
> +
> + /* Yes, this is intentional.
> + * Ganges devices only use gpio-keys for
> + * Volume Down, but currently there's an
> + * issue with it that has to be resolved.
> + * Until then, let's not make the kernel panic
> + */
> + /delete-node/ gpio-keys;
> + };
> +
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
> new file mode 100644
> index 000000000000..96b7782d58de
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
> @@ -0,0 +1,20 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2020, Martin Botka
> + */
> +
> +/dts-v1/;
> +
> +/* Mermaid uses sdm636, but it's different ever so slightly
> + * that we can ignore it for the time being. Sony also commonizes
> + * the Ganges platform as a whole in downstream kernels.
> + */
> +#include "sdm630-sony-xperia-ganges.dtsi"
> +
> +/ {
> + model = "SoMC Mermaid-RoW";
> + compatible = "sony,mermaid-row", "qcom,sdm636", "qcom,sdm636-mtp";
> +
> + qcom,msm-id = <345 0>;
> + qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00 0x1001b 0x102001a 0x00 0x00>;
> +};
> --
> 2.27.0
>
prev parent reply other threads:[~2020-06-22 17:57 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-22 7:57 [PATCH v2 0/8] Add support for Sony SDM630-based boards Konrad Dybcio
2020-06-22 7:57 ` [PATCH v2 1/8] pinctrl: qcom: spmi-gpio: Add pm660(l) compatibility Konrad Dybcio
2020-06-22 8:02 ` Bjorn Andersson
2020-06-22 7:57 ` [PATCH v2 2/8] Documentation: Document pm660(l) SPMI GPIOs compatible Konrad Dybcio
2020-06-22 8:03 ` Bjorn Andersson
2020-06-22 7:57 ` [PATCH v2 3/8] soc: qcom: socinfo: Add socinfo entry for SDM630 Konrad Dybcio
2020-06-22 8:05 ` Bjorn Andersson
2020-06-22 8:37 ` Konrad Dybcio
2020-06-22 17:43 ` Bjorn Andersson
2020-06-22 7:57 ` [PATCH v2 4/8] clk: qcom: smd: Add support for SDM660 rpm clocks Konrad Dybcio
2020-06-22 8:48 ` Stephen Boyd
2020-06-22 7:57 ` [PATCH v2 5/8] arm64: dts: qcom: pm660(l): Add base dts files Konrad Dybcio
2020-06-22 8:09 ` Bjorn Andersson
2020-06-22 7:57 ` [PATCH v2 6/8] arm64: dts: qcom: sdm630: Add sdm630 dts file Konrad Dybcio
2020-06-22 17:49 ` Bjorn Andersson
2020-06-22 18:01 ` Konrad Dybcio
2020-06-22 7:57 ` [PATCH v2 7/8] arm64: dts: qcom: Add support for Sony Xperia XA2/Plus/Ultra (Nile platform) Konrad Dybcio
2020-06-22 17:52 ` Bjorn Andersson
2020-06-22 7:57 ` [PATCH v2 8/8] arm64: dts: qcom: Add support for Sony Xperia 10/10 Plus (Ganges platform) Konrad Dybcio
2020-06-22 17:54 ` Bjorn Andersson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200622175428.GU128451@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=anton@enomsg.org \
--cc=ccross@android.com \
--cc=devicetree@vger.kernel.org \
--cc=keescook@chromium.org \
--cc=konradybcio@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.botka1@gmail.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=skrzynka@konradybcio.pl \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).