LKML Archive on lore.kernel.org
 help / color / Atom feed
From: "Alexander A. Klimov" <grandmaster@al2klimov.de>
To: michael.hennerich@analog.com, jic23@kernel.org, knaack.h@gmx.de,
	lars@metafoo.de, pmeerw@pmeerw.net, robh+dt@kernel.org,
	ribalda@kernel.org, tomislav.denis@avl.com, broonie@kernel.org,
	alexandru.ardelean@analog.com, sboyd@kernel.org,
	ak@it-klinger.de, linux-iio@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Subject: [PATCH] Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iio
Date: Fri,  3 Jul 2020 20:57:25 +0200
Message-ID: <20200703185725.15399-1-grandmaster@al2klimov.de> (raw)

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
          If both the HTTP and HTTPS versions
          return 200 OK and serve the same content:
            Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
---
 Continuing my work started at 93431e0607e5.

 If there are any URLs to be removed completely or at least not HTTPSified:
 Just clearly say so and I'll *undo my change*.
 See also https://lkml.org/lkml/2020/6/27/64

 If there are any valid, but yet not changed URLs:
 See https://lkml.org/lkml/2020/6/26/837

 Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml  | 4 ++--
 Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt      | 2 +-
 Documentation/devicetree/bindings/iio/iio-bindings.txt        | 2 +-
 Documentation/devicetree/bindings/iio/light/apds9300.txt      | 2 +-
 Documentation/devicetree/bindings/iio/light/apds9960.txt      | 2 +-
 Documentation/devicetree/bindings/iio/light/opt3001.txt       | 2 +-
 Documentation/devicetree/bindings/iio/light/vl6180.txt        | 2 +-
 .../devicetree/bindings/iio/potentiometer/mcp41010.txt        | 2 +-
 .../devicetree/bindings/iio/potentiostat/lmp91000.txt         | 4 ++--
 .../devicetree/bindings/iio/pressure/asc,dlhl60d.yaml         | 2 +-
 .../devicetree/bindings/iio/proximity/devantech-srf04.yaml    | 4 ++--
 Documentation/devicetree/bindings/iio/temperature/tmp007.txt  | 2 +-
 12 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
index d124eba1ce54..fd4eaa3d0ab4 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@@ -12,8 +12,8 @@ maintainers:
 description: |
   Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports
   both I2C & SPI interfaces.
-    http://www.analog.com/en/products/mems/accelerometers/adxl345.html
-    http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
+    https://www.analog.com/en/products/mems/accelerometers/adxl345.html
+    https://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
index 639c94ed83e9..17af395b99d9 100644
--- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
@@ -6,7 +6,7 @@ Is is programmable through an SPI interface.
 
 The internal DACs are loaded when the LOADDACS pin is pulled down.
 
-http://www.ti.com/lit/ds/sbas106/sbas106.pdf
+https://www.ti.com/lit/ds/sbas106/sbas106.pdf
 
 Required Properties:
 - compatible: Should be one of:
diff --git a/Documentation/devicetree/bindings/iio/iio-bindings.txt b/Documentation/devicetree/bindings/iio/iio-bindings.txt
index af33267727f4..aa63cac7323e 100644
--- a/Documentation/devicetree/bindings/iio/iio-bindings.txt
+++ b/Documentation/devicetree/bindings/iio/iio-bindings.txt
@@ -9,7 +9,7 @@ specifier is an array of one or more cells identifying the IIO
 output on a device. The length of an IIO specifier is defined by the
 value of a #io-channel-cells property in the IIO provider node.
 
-[1] http://marc.info/?l=linux-iio&m=135902119507483&w=2
+[1] https://marc.info/?l=linux-iio&m=135902119507483&w=2
 
 ==IIO providers==
 
diff --git a/Documentation/devicetree/bindings/iio/light/apds9300.txt b/Documentation/devicetree/bindings/iio/light/apds9300.txt
index aa199e09a493..3aa6db3ee99d 100644
--- a/Documentation/devicetree/bindings/iio/light/apds9300.txt
+++ b/Documentation/devicetree/bindings/iio/light/apds9300.txt
@@ -1,6 +1,6 @@
 * Avago APDS9300 ambient light sensor
 
-http://www.avagotech.com/docs/AV02-1077EN
+https://www.avagotech.com/docs/AV02-1077EN
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/iio/light/apds9960.txt b/Documentation/devicetree/bindings/iio/light/apds9960.txt
index 3af325ad194b..c53ddb81c4aa 100644
--- a/Documentation/devicetree/bindings/iio/light/apds9960.txt
+++ b/Documentation/devicetree/bindings/iio/light/apds9960.txt
@@ -1,6 +1,6 @@
 * Avago APDS9960 gesture/RGB/ALS/proximity sensor
 
-http://www.avagotech.com/docs/AV02-4191EN
+https://www.avagotech.com/docs/AV02-4191EN
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt
index 47b13eb8f4ec..9e6f2998e751 100644
--- a/Documentation/devicetree/bindings/iio/light/opt3001.txt
+++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt
@@ -6,7 +6,7 @@ the optional generation of IIO events on rising/falling light threshold changes
 requires the use of interrupts. Without interrupts, only the simple reading
 of the current light value is supported through the IIO API.
 
-http://www.ti.com/product/opt3001
+https://www.ti.com/product/opt3001
 
 Required properties:
   - compatible: should be "ti,opt3001"
diff --git a/Documentation/devicetree/bindings/iio/light/vl6180.txt b/Documentation/devicetree/bindings/iio/light/vl6180.txt
index 2c52952715a0..fb9137d85df9 100644
--- a/Documentation/devicetree/bindings/iio/light/vl6180.txt
+++ b/Documentation/devicetree/bindings/iio/light/vl6180.txt
@@ -1,6 +1,6 @@
 STMicro VL6180 -  ALS, range and proximity sensor
 
-Link to datasheet: http://www.st.com/resource/en/datasheet/vl6180x.pdf
+Link to datasheet: https://www.st.com/resource/en/datasheet/vl6180x.pdf
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
index 566711b9950c..4f245e8469fd 100644
--- a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
+++ b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
@@ -1,7 +1,7 @@
 * Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer
 
 Datasheet publicly available at:
-http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
+https://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
 
 The node for this driver must be a child node of a SPI controller, hence
 all mandatory properties described in
diff --git a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
index e6d0c2eb345c..f3ab02b0dd41 100644
--- a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
+++ b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
@@ -1,7 +1,7 @@
 * Texas Instruments LMP91000 series of potentiostats
 
-LMP91000: http://www.ti.com/lit/ds/symlink/lmp91000.pdf
-LMP91002: http://www.ti.com/lit/ds/symlink/lmp91002.pdf
+LMP91000: https://www.ti.com/lit/ds/symlink/lmp91000.pdf
+LMP91002: https://www.ti.com/lit/ds/symlink/lmp91002.pdf
 
 Required properties:
 
diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
index 64c18f1693f0..be2be4b556db 100644
--- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
@@ -13,7 +13,7 @@ description: |
   Bindings for the All Sensors DLH series pressure sensors.
 
   Specifications about the sensors can be found at:
-    http://www.allsensors.com/cad/DS-0355_Rev_B.PDF
+    https://www.allsensors.com/cad/DS-0355_Rev_B.PDF
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
index f86f8b23ef18..ce795279839e 100644
--- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
@@ -17,9 +17,9 @@ description: |
     until it is received once again
 
   Specifications about the devices can be found at:
-  http://www.robot-electronics.co.uk/htm/srf04tech.htm
+  https://www.robot-electronics.co.uk/htm/srf04tech.htm
 
-  http://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
+  https://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/iio/temperature/tmp007.txt b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
index da0af234a357..21952c140599 100644
--- a/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
+++ b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
@@ -1,6 +1,6 @@
 * TI TMP007 - IR thermopile sensor with integrated math engine
 
-Link to datasheet: http://www.ti.com/lit/ds/symlink/tmp007.pdf
+Link to datasheet: https://www.ti.com/lit/ds/symlink/tmp007.pdf
 
 Required properties:
 
-- 
2.27.0


             reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-03 18:57 Alexander A. Klimov [this message]
2020-07-04 16:34 ` Jonathan Cameron
2020-07-04 19:33   ` [PATCH v2] " Alexander A. Klimov
2020-07-04 23:05     ` Matt Ranostay
2020-07-12 13:22       ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200703185725.15399-1-grandmaster@al2klimov.de \
    --to=grandmaster@al2klimov.de \
    --cc=ak@it-klinger.de \
    --cc=alexandru.ardelean@analog.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael.hennerich@analog.com \
    --cc=pmeerw@pmeerw.net \
    --cc=ribalda@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tomislav.denis@avl.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git