LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Cc: michael.hennerich@analog.com, knaack.h@gmx.de, lars@metafoo.de,
	pmeerw@pmeerw.net, robh+dt@kernel.org, ribalda@kernel.org,
	tomislav.denis@avl.com, broonie@kernel.org,
	alexandru.ardelean@analog.com, sboyd@kernel.org,
	ak@it-klinger.de, linux-iio@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] Replace HTTP links with HTTPS ones: Documentation/devicetree/bindings/iio
Date: Sat, 4 Jul 2020 17:34:59 +0100
Message-ID: <20200704173459.78ceec60@archlinux> (raw)
In-Reply-To: <20200703185725.15399-1-grandmaster@al2klimov.de>

On Fri,  3 Jul 2020 20:57:25 +0200
"Alexander A. Klimov" <grandmaster@al2klimov.de> wrote:

> Rationale:
> Reduces attack surface on kernel devs opening the links for MITM
> as HTTPS traffic is much harder to manipulate.
> 
> Deterministic algorithm:
> For each file:
>   If not .svg:
>     For each line:
>       If doesn't contain `\bxmlns\b`:
>         For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
>           If both the HTTP and HTTPS versions
>           return 200 OK and serve the same content:
>             Replace HTTP with HTTPS.
> 
> Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
> ---
>  Continuing my work started at 93431e0607e5.
> 
>  If there are any URLs to be removed completely or at least not HTTPSified:
>  Just clearly say so and I'll *undo my change*.
>  See also https://lkml.org/lkml/2020/6/27/64
> 
>  If there are any valid, but yet not changed URLs:
>  See https://lkml.org/lkml/2020/6/26/837
> 
>  Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml  | 4 ++--
>  Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt      | 2 +-
>  Documentation/devicetree/bindings/iio/iio-bindings.txt        | 2 +-
>  Documentation/devicetree/bindings/iio/light/apds9300.txt      | 2 +-
>  Documentation/devicetree/bindings/iio/light/apds9960.txt      | 2 +-
>  Documentation/devicetree/bindings/iio/light/opt3001.txt       | 2 +-
>  Documentation/devicetree/bindings/iio/light/vl6180.txt        | 2 +-
>  .../devicetree/bindings/iio/potentiometer/mcp41010.txt        | 2 +-
>  .../devicetree/bindings/iio/potentiostat/lmp91000.txt         | 4 ++--
>  .../devicetree/bindings/iio/pressure/asc,dlhl60d.yaml         | 2 +-
>  .../devicetree/bindings/iio/proximity/devantech-srf04.yaml    | 4 ++--
>  Documentation/devicetree/bindings/iio/temperature/tmp007.txt  | 2 +-
>  12 files changed, 15 insertions(+), 15 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> index d124eba1ce54..fd4eaa3d0ab4 100644
> --- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
> @@ -12,8 +12,8 @@ maintainers:
>  description: |
>    Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports
>    both I2C & SPI interfaces.
> -    http://www.analog.com/en/products/mems/accelerometers/adxl345.html
> -    http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
> +    https://www.analog.com/en/products/mems/accelerometers/adxl345.html
> +    https://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
>  
>  properties:
>    compatible:
> diff --git a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> index 639c94ed83e9..17af395b99d9 100644
> --- a/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> +++ b/Documentation/devicetree/bindings/iio/dac/ti,dac7612.txt
> @@ -6,7 +6,7 @@ Is is programmable through an SPI interface.
>  
>  The internal DACs are loaded when the LOADDACS pin is pulled down.
>  
> -http://www.ti.com/lit/ds/sbas106/sbas106.pdf
> +https://www.ti.com/lit/ds/sbas106/sbas106.pdf
>  
>  Required Properties:
>  - compatible: Should be one of:
> diff --git a/Documentation/devicetree/bindings/iio/iio-bindings.txt b/Documentation/devicetree/bindings/iio/iio-bindings.txt
> index af33267727f4..aa63cac7323e 100644
> --- a/Documentation/devicetree/bindings/iio/iio-bindings.txt
> +++ b/Documentation/devicetree/bindings/iio/iio-bindings.txt
> @@ -9,7 +9,7 @@ specifier is an array of one or more cells identifying the IIO
>  output on a device. The length of an IIO specifier is defined by the
>  value of a #io-channel-cells property in the IIO provider node.
>  
> -[1] http://marc.info/?l=linux-iio&m=135902119507483&w=2
> +[1] https://marc.info/?l=linux-iio&m=135902119507483&w=2
>  
>  ==IIO providers==
>  
> diff --git a/Documentation/devicetree/bindings/iio/light/apds9300.txt b/Documentation/devicetree/bindings/iio/light/apds9300.txt
> index aa199e09a493..3aa6db3ee99d 100644
> --- a/Documentation/devicetree/bindings/iio/light/apds9300.txt
> +++ b/Documentation/devicetree/bindings/iio/light/apds9300.txt
> @@ -1,6 +1,6 @@
>  * Avago APDS9300 ambient light sensor
>  
> -http://www.avagotech.com/docs/AV02-1077EN
> +https://www.avagotech.com/docs/AV02-1077EN
>  
>  Required properties:
>  
> diff --git a/Documentation/devicetree/bindings/iio/light/apds9960.txt b/Documentation/devicetree/bindings/iio/light/apds9960.txt
> index 3af325ad194b..c53ddb81c4aa 100644
> --- a/Documentation/devicetree/bindings/iio/light/apds9960.txt
> +++ b/Documentation/devicetree/bindings/iio/light/apds9960.txt
> @@ -1,6 +1,6 @@
>  * Avago APDS9960 gesture/RGB/ALS/proximity sensor
>  
> -http://www.avagotech.com/docs/AV02-4191EN
> +https://www.avagotech.com/docs/AV02-4191EN
>  
>  Required properties:
>  
> diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt
> index 47b13eb8f4ec..9e6f2998e751 100644
> --- a/Documentation/devicetree/bindings/iio/light/opt3001.txt
> +++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt
> @@ -6,7 +6,7 @@ the optional generation of IIO events on rising/falling light threshold changes
>  requires the use of interrupts. Without interrupts, only the simple reading
>  of the current light value is supported through the IIO API.
>  
> -http://www.ti.com/product/opt3001
> +https://www.ti.com/product/opt3001
>  
>  Required properties:
>    - compatible: should be "ti,opt3001"
> diff --git a/Documentation/devicetree/bindings/iio/light/vl6180.txt b/Documentation/devicetree/bindings/iio/light/vl6180.txt
> index 2c52952715a0..fb9137d85df9 100644
> --- a/Documentation/devicetree/bindings/iio/light/vl6180.txt
> +++ b/Documentation/devicetree/bindings/iio/light/vl6180.txt
> @@ -1,6 +1,6 @@
>  STMicro VL6180 -  ALS, range and proximity sensor
>  
> -Link to datasheet: http://www.st.com/resource/en/datasheet/vl6180x.pdf
> +Link to datasheet: https://www.st.com/resource/en/datasheet/vl6180x.pdf
>  
>  Required properties:
>  
> diff --git a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> index 566711b9950c..4f245e8469fd 100644
> --- a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> +++ b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> @@ -1,7 +1,7 @@
>  * Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer
>  
>  Datasheet publicly available at:
> -http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
> +https://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
>  
>  The node for this driver must be a child node of a SPI controller, hence
>  all mandatory properties described in
> diff --git a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
> index e6d0c2eb345c..f3ab02b0dd41 100644
> --- a/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
> +++ b/Documentation/devicetree/bindings/iio/potentiostat/lmp91000.txt
> @@ -1,7 +1,7 @@
>  * Texas Instruments LMP91000 series of potentiostats
>  
> -LMP91000: http://www.ti.com/lit/ds/symlink/lmp91000.pdf
> -LMP91002: http://www.ti.com/lit/ds/symlink/lmp91002.pdf
> +LMP91000: https://www.ti.com/lit/ds/symlink/lmp91000.pdf
> +LMP91002: https://www.ti.com/lit/ds/symlink/lmp91002.pdf
>  
>  Required properties:
>  
> diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> index 64c18f1693f0..be2be4b556db 100644
> --- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
> @@ -13,7 +13,7 @@ description: |
>    Bindings for the All Sensors DLH series pressure sensors.
>  
>    Specifications about the sensors can be found at:
> -    http://www.allsensors.com/cad/DS-0355_Rev_B.PDF
> +    https://www.allsensors.com/cad/DS-0355_Rev_B.PDF
>  
>  properties:
>    compatible:
> diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> index f86f8b23ef18..ce795279839e 100644
> --- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> +++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
> @@ -17,9 +17,9 @@ description: |
>      until it is received once again
>  
>    Specifications about the devices can be found at:
> -  http://www.robot-electronics.co.uk/htm/srf04tech.htm
> +  https://www.robot-electronics.co.uk/htm/srf04tech.htm
>  
> -  http://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
> +  https://www.maxbotix.com/documents/LV-MaxSonar-EZ_Datasheet.pdf
>  
>  properties:
>    compatible:
> diff --git a/Documentation/devicetree/bindings/iio/temperature/tmp007.txt b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
> index da0af234a357..21952c140599 100644
> --- a/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
> +++ b/Documentation/devicetree/bindings/iio/temperature/tmp007.txt
> @@ -1,6 +1,6 @@
>  * TI TMP007 - IR thermopile sensor with integrated math engine
>  
> -Link to datasheet: http://www.ti.com/lit/ds/symlink/tmp007.pdf
> +Link to datasheet: https://www.ti.com/lit/ds/symlink/tmp007.pdf

This one doesn't actually take us anywhere very useful. So probably best
to just drop it.  The datasheet has been removed from TI's website it
seems.


>  
>  Required properties:
>  


  reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-03 18:57 Alexander A. Klimov
2020-07-04 16:34 ` Jonathan Cameron [this message]
2020-07-04 19:33   ` [PATCH v2] " Alexander A. Klimov
2020-07-04 23:05     ` Matt Ranostay
2020-07-12 13:22       ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200704173459.78ceec60@archlinux \
    --to=jic23@kernel.org \
    --cc=ak@it-klinger.de \
    --cc=alexandru.ardelean@analog.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=grandmaster@al2klimov.de \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael.hennerich@analog.com \
    --cc=pmeerw@pmeerw.net \
    --cc=ribalda@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tomislav.denis@avl.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git