linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Thomas Gleixner <tglx@linutronix.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: x86@kernel.org, linux-arch@vger.kernel.org,
	Will Deacon <will@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
	Mark Rutland <mark.rutland@arm.com>,
	Kees Cook <keescook@chromium.org>,
	Keno Fischer <keno@juliacomputing.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	kvm@vger.kernel.org,
	Gabriel Krisman Bertazi <krisman@collabora.com>
Subject: [patch V4 03/15] entry: Provide generic syscall exit function
Date: Tue, 21 Jul 2020 12:57:09 +0200	[thread overview]
Message-ID: <20200721110808.562407874@linutronix.de> (raw)
In-Reply-To: 20200721105706.030914876@linutronix.de

Like syscall entry all architectures have similar and pointlessly different
code to handle pending work before returning from a syscall to user space.

  1) One-time syscall exit work:
      - rseq syscall exit
      - audit
      - syscall tracing
      - tracehook (single stepping)

  2) Preparatory work
      - Exit to user mode loop (common TIF handling).
      - Architecture specific one time work arch_exit_to_user_mode_prepare()
      - Address limit and lockdep checks
     
  3) Final transition (lockdep, tracing, context tracking, RCU). Invokes
     arch_exit_to_user_mode() to handle e.g. speculation mitigations

Provide a generic version based on the x86 code which has all the RCU and
instrumentation protections right.

Provide a variant for interrupt return to user mode as well which shares
the above #2 and #3 work items.

After syscall_exit_to_user_mode() and irqentry_exit_to_user_mode() the
architecture code just has to return to user space. The code after
returning from these functions must not be instrumented.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
---
V4: Remove _TIF_NOTIFY_RESUME dummy define as it is defined by all architectures
    Remove the return value helper and use the existing regs_return_value()
---
 include/linux/entry-common.h |  189 +++++++++++++++++++++++++++++++++++++++++++
 kernel/entry/common.c        |  169 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 358 insertions(+)

--- a/include/linux/entry-common.h
+++ b/include/linux/entry-common.h
@@ -29,6 +29,14 @@
 # define _TIF_SYSCALL_AUDIT		(0)
 #endif
 
+#ifndef _TIF_PATCH_PENDING
+# define _TIF_PATCH_PENDING		(0)
+#endif
+
+#ifndef _TIF_UPROBE
+# define _TIF_UPROBE			(0)
+#endif
+
 /*
  * TIF flags handled in syscall_enter_from_usermode()
  */
@@ -41,6 +49,29 @@
 	 _TIF_SYSCALL_TRACEPOINT | _TIF_SYSCALL_EMU |			\
 	 ARCH_SYSCALL_ENTER_WORK)
 
+/*
+ * TIF flags handled in syscall_exit_to_user_mode()
+ */
+#ifndef ARCH_SYSCALL_EXIT_WORK
+# define ARCH_SYSCALL_EXIT_WORK		(0)
+#endif
+
+#define SYSCALL_EXIT_WORK						\
+	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT |			\
+	 _TIF_SYSCALL_TRACEPOINT | ARCH_SYSCALL_EXIT_WORK)
+
+/*
+ * TIF flags handled in exit_to_user_mode_loop()
+ */
+#ifndef ARCH_EXIT_TO_USER_MODE_WORK
+# define ARCH_EXIT_TO_USER_MODE_WORK		(0)
+#endif
+
+#define EXIT_TO_USER_MODE_WORK						\
+	(_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_UPROBE |		\
+	 _TIF_NEED_RESCHED | _TIF_PATCH_PENDING |			\
+	 ARCH_EXIT_TO_USER_MODE_WORK)
+
 /**
  * arch_check_user_regs - Architecture specific sanity check for user mode regs
  * @regs:	Pointer to currents pt_regs
@@ -106,6 +137,149 @@ static inline __must_check int arch_sysc
 long syscall_enter_from_user_mode(struct pt_regs *regs, long syscall);
 
 /**
+ * local_irq_enable_exit_to_user - Exit to user variant of local_irq_enable()
+ * @ti_work:	Cached TIF flags gathered with interrupts disabled
+ *
+ * Defaults to local_irq_enable(). Can be supplied by architecture specific
+ * code.
+ */
+static inline void local_irq_enable_exit_to_user(unsigned long ti_work);
+
+#ifndef local_irq_enable_exit_to_user
+static inline void local_irq_enable_exit_to_user(unsigned long ti_work)
+{
+	local_irq_enable();
+}
+#endif
+
+/**
+ * local_irq_disable_exit_to_user - Exit to user variant of local_irq_disable()
+ *
+ * Defaults to local_irq_disable(). Can be supplied by architecture specific
+ * code.
+ */
+static inline void local_irq_disable_exit_to_user(void);
+
+#ifndef local_irq_disable_exit_to_user
+static inline void local_irq_disable_exit_to_user(void)
+{
+	local_irq_disable();
+}
+#endif
+
+/**
+ * arch_exit_to_user_mode_work - Architecture specific TIF work for exit
+ *				 to user mode.
+ * @regs:	Pointer to currents pt_regs
+ * @ti_work:	Cached TIF flags gathered with interrupts disabled
+ *
+ * Invoked from exit_to_user_mode_loop() with interrupt enabled
+ *
+ * Defaults to NOOP. Can be supplied by architecture specific code.
+ */
+static inline void arch_exit_to_user_mode_work(struct pt_regs *regs,
+					       unsigned long ti_work);
+
+#ifndef arch_exit_to_user_mode_work
+static inline void arch_exit_to_user_mode_work(struct pt_regs *regs,
+					       unsigned long ti_work)
+{
+}
+#endif
+
+/**
+ * arch_exit_to_user_mode_prepare - Architecture specific preparation for
+ *				    exit to user mode.
+ * @regs:	Pointer to currents pt_regs
+ * @ti_work:	Cached TIF flags gathered with interrupts disabled
+ *
+ * Invoked from exit_to_user_mode_prepare() with interrupt disabled as the last
+ * function before return. Defaults to NOOP.
+ */
+static inline void arch_exit_to_user_mode_prepare(struct pt_regs *regs,
+						  unsigned long ti_work);
+
+#ifndef arch_exit_to_user_mode_prepare
+static inline void arch_exit_to_user_mode_prepare(struct pt_regs *regs,
+						  unsigned long ti_work)
+{
+}
+#endif
+
+/**
+ * arch_exit_to_user_mode - Architecture specific final work before
+ *			    exit to user mode.
+ *
+ * Invoked from exit_to_user_mode() with interrupt disabled as the last
+ * function before return. Defaults to NOOP.
+ *
+ * This needs to be __always_inline because it is non-instrumentable code
+ * invoked after context tracking switched to user mode.
+ *
+ * An architecture implementation must not do anything complex, no locking
+ * etc. The main purpose is for speculation mitigations.
+ */
+static __always_inline void arch_exit_to_user_mode(void);
+
+#ifndef arch_exit_to_user_mode
+static __always_inline void arch_exit_to_user_mode(void) { }
+#endif
+
+/**
+ * arch_do_signal -  Architecture specific signal delivery function
+ * @regs:	Pointer to currents pt_regs
+ *
+ * Invoked from exit_to_user_mode_loop().
+ */
+void arch_do_signal(struct pt_regs *regs);
+
+/**
+ * arch_syscall_exit_tracehook - Wrapper around tracehook_report_syscall_exit()
+ * @regs:	Pointer to currents pt_regs
+ * @step:	Indicator for single step
+ *
+ * Defaults to tracehook_report_syscall_exit(). Can be replaced by
+ * architecture specific code.
+ *
+ * Invoked from syscall_exit_to_user_mode()
+ */
+static inline void arch_syscall_exit_tracehook(struct pt_regs *regs, bool step);
+
+#ifndef arch_syscall_exit_tracehook
+static inline void arch_syscall_exit_tracehook(struct pt_regs *regs, bool step)
+{
+	tracehook_report_syscall_exit(regs, step);
+}
+#endif
+
+/**
+ * syscall_exit_to_user_mode - Handle work before returning to user mode
+ * @regs:	Pointer to currents pt_regs
+ *
+ * Invoked with interrupts enabled and fully valid regs. Returns with all
+ * work handled, interrupts disabled such that the caller can immediately
+ * switch to user mode. Called from architecture specific syscall and ret
+ * from fork code.
+ *
+ * The call order is:
+ *  1) One-time syscall exit work:
+ *	- rseq syscall exit
+ *      - audit
+ *	- syscall tracing
+ *	- tracehook (single stepping)
+ *
+ *  2) Preparatory work
+ *	- Exit to user mode loop (common TIF handling). Invokes
+ *	  arch_exit_to_user_mode_work() for architecture specific TIF work
+ *	- Architecture specific one time work arch_exit_to_user_mode_prepare()
+ *	- Address limit and lockdep checks
+ *
+ *  3) Final transition (lockdep, tracing, context tracking, RCU). Invokes
+ *     arch_exit_to_user_mode() to handle e.g. speculation mitigations
+ */
+void syscall_exit_to_user_mode(struct pt_regs *regs);
+
+/**
  * irqentry_enter_from_user_mode - Establish state before invoking the irq handler
  * @regs:	Pointer to currents pt_regs
  *
@@ -118,4 +292,19 @@ long syscall_enter_from_user_mode(struct
  */
 void irqentry_enter_from_user_mode(struct pt_regs *regs);
 
+/**
+ * irqentry_exit_to_user_mode - Interrupt exit work
+ * @regs:	Pointer to current's pt_regs
+ *
+ * Invoked with interrupts disbled and fully valid regs. Returns with all
+ * work handled, interrupts disabled such that the caller can immediately
+ * switch to user mode. Called from architecture specific interrupt
+ * handling code.
+ *
+ * The call order is #2 and #3 as described in syscall_exit_to_user_mode().
+ * Interrupt exit is not invoking #1 which is the syscall specific one time
+ * work.
+ */
+void irqentry_exit_to_user_mode(struct pt_regs *regs);
+
 #endif
--- a/kernel/entry/common.c
+++ b/kernel/entry/common.c
@@ -2,6 +2,8 @@
 
 #include <linux/context_tracking.h>
 #include <linux/entry-common.h>
+#include <linux/livepatch.h>
+#include <linux/audit.h>
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/syscalls.h>
@@ -82,7 +84,174 @@ noinstr long syscall_enter_from_user_mod
 	return syscall;
 }
 
+/**
+ * exit_to_user_mode - Fixup state when exiting to user mode
+ *
+ * Syscall/interupt exit enables interrupts, but the kernel state is
+ * interrupts disabled when this is invoked. Also tell RCU about it.
+ *
+ * 1) Trace interrupts on state
+ * 2) Invoke context tracking if enabled to adjust RCU state
+ * 3) Invoke architecture specific last minute exit code, e.g. speculation
+ *    mitigations, etc.
+ * 4) Tell lockdep that interrupts are enabled
+ */
+static __always_inline void exit_to_user_mode(void)
+{
+	instrumentation_begin();
+	trace_hardirqs_on_prepare();
+	lockdep_hardirqs_on_prepare(CALLER_ADDR0);
+	instrumentation_end();
+
+	user_enter_irqoff();
+	arch_exit_to_user_mode();
+	lockdep_hardirqs_on(CALLER_ADDR0);
+}
+
+/* Workaround to allow gradual conversion of architecture code */
+void __weak arch_do_signal(struct pt_regs *regs) { }
+
+static unsigned long exit_to_user_mode_loop(struct pt_regs *regs,
+					    unsigned long ti_work)
+{
+	/*
+	 * Before returning to user space ensure that all pending work
+	 * items have been completed.
+	 */
+	while (ti_work & EXIT_TO_USER_MODE_WORK) {
+
+		local_irq_enable_exit_to_user(ti_work);
+
+		if (ti_work & _TIF_NEED_RESCHED)
+			schedule();
+
+		if (ti_work & _TIF_UPROBE)
+			uprobe_notify_resume(regs);
+
+		if (ti_work & _TIF_PATCH_PENDING)
+			klp_update_patch_state(current);
+
+		if (ti_work & _TIF_SIGPENDING)
+			arch_do_signal(regs);
+
+		if (ti_work & _TIF_NOTIFY_RESUME) {
+			clear_thread_flag(TIF_NOTIFY_RESUME);
+			tracehook_notify_resume(regs);
+			rseq_handle_notify_resume(NULL, regs);
+		}
+
+		/* Architecture specific TIF work */
+		arch_exit_to_user_mode_work(regs, ti_work);
+
+		/*
+		 * Disable interrupts and reevaluate the work flags as they
+		 * might have changed while interrupts and preemption was
+		 * enabled above.
+		 */
+		local_irq_disable_exit_to_user();
+		ti_work = READ_ONCE(current_thread_info()->flags);
+	}
+
+	/* Return the latest work state for arch_exit_to_user_mode() */
+	return ti_work;
+}
+
+static void exit_to_user_mode_prepare(struct pt_regs *regs)
+{
+	unsigned long ti_work = READ_ONCE(current_thread_info()->flags);
+
+	lockdep_assert_irqs_disabled();
+
+	if (unlikely(ti_work & EXIT_TO_USER_MODE_WORK))
+		ti_work = exit_to_user_mode_loop(regs, ti_work);
+
+	arch_exit_to_user_mode_prepare(regs, ti_work);
+
+	/* Ensure that the address limit is intact and no locks are held */
+	addr_limit_user_check();
+	lockdep_assert_irqs_disabled();
+	lockdep_sys_exit();
+}
+
+#ifndef _TIF_SINGLESTEP
+static inline bool report_single_step(unsigned long ti_work)
+{
+	return false;
+}
+#else
+/*
+ * If TIF_SYSCALL_EMU is set, then the only reason to report is when
+ * TIF_SINGLESTEP is set (i.e. PTRACE_SYSEMU_SINGLESTEP).  This syscall
+ * instruction has been already reported in syscall_enter_from_usermode().
+ */
+#define SYSEMU_STEP	(_TIF_SINGLESTEP | _TIF_SYSCALL_EMU)
+
+static inline bool report_single_step(unsigned long ti_work)
+{
+	return (ti_work & SYSEMU_STEP) == _TIF_SINGLESTEP;
+}
+#endif
+
+static void syscall_exit_work(struct pt_regs *regs, unsigned long ti_work)
+{
+	bool step;
+
+	audit_syscall_exit(regs);
+
+	if (ti_work & _TIF_SYSCALL_TRACEPOINT)
+		trace_sys_exit(regs, syscall_get_return_value(current, regs));
+
+	step = report_single_step(ti_work);
+	if (step || ti_work & _TIF_SYSCALL_TRACE)
+		arch_syscall_exit_tracehook(regs, step);
+}
+
+/*
+ * Syscall specific exit to user mode preparation. Runs with interrupts
+ * enabled.
+ */
+static void syscall_exit_to_user_mode_prepare(struct pt_regs *regs)
+{
+	u32 cached_flags = READ_ONCE(current_thread_info()->flags);
+	unsigned long nr = syscall_get_nr(current, regs);
+
+	CT_WARN_ON(ct_state() != CONTEXT_KERNEL);
+
+	if (IS_ENABLED(CONFIG_PROVE_LOCKING)) {
+		if (WARN(irqs_disabled(), "syscall %lu left IRQs disabled", nr))
+			local_irq_enable();
+	}
+
+	rseq_syscall(regs);
+
+	/*
+	 * Do one-time syscall specific work. If these work items are
+	 * enabled, we want to run them exactly once per syscall exit with
+	 * interrupts enabled.
+	 */
+	if (unlikely(cached_flags & SYSCALL_EXIT_WORK))
+		syscall_exit_work(regs, cached_flags);
+}
+
+__visible noinstr void syscall_exit_to_user_mode(struct pt_regs *regs)
+{
+	instrumentation_begin();
+	syscall_exit_to_user_mode_prepare(regs);
+	local_irq_disable_exit_to_user();
+	exit_to_user_mode_prepare(regs);
+	instrumentation_end();
+	exit_to_user_mode();
+}
+
 noinstr void irqentry_enter_from_user_mode(struct pt_regs *regs)
 {
 	enter_from_user_mode(regs);
 }
+
+noinstr void irqentry_exit_to_user_mode(struct pt_regs *regs)
+{
+	instrumentation_begin();
+	exit_to_user_mode_prepare(regs);
+	instrumentation_end();
+	exit_to_user_mode();
+}


  parent reply	other threads:[~2020-07-21 11:08 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-21 10:57 [patch V4 00/15] entry, x86, kvm: Generic entry/exit functionality for host and guest Thomas Gleixner
2020-07-21 10:57 ` [patch V4 01/15] seccomp: Provide stub for __secure_computing() Thomas Gleixner
2020-07-21 21:21   ` Kees Cook
2020-07-21 10:57 ` [patch V4 02/15] entry: Provide generic syscall entry functionality Thomas Gleixner
2020-07-21 21:38   ` Kees Cook
2020-07-22  7:34     ` Thomas Gleixner
2020-07-22  7:54     ` peterz
2020-07-21 10:57 ` Thomas Gleixner [this message]
2020-07-27 22:37   ` [patch V4 03/15] entry: Provide generic syscall exit function Andy Lutomirski
2020-07-21 10:57 ` [patch V4 04/15] entry: Provide generic interrupt entry/exit code Thomas Gleixner
2020-07-27 22:39   ` Andy Lutomirski
2020-07-29 12:18     ` Thomas Gleixner
2020-07-21 10:57 ` [patch V4 05/15] entry: Provide infrastructure for work before exiting to guest mode Thomas Gleixner
2020-07-21 10:57 ` [patch V4 06/15] x86/entry: Consolidate check_user_regs() Thomas Gleixner
2020-07-27 22:39   ` Andy Lutomirski
2020-07-21 10:57 ` [patch V4 07/15] x86/entry: Consolidate 32/64 bit syscall entry Thomas Gleixner
2020-07-21 10:57 ` [patch V4 08/15] x86/entry: Move user return notifier out of loop Thomas Gleixner
2020-07-21 10:57 ` [patch V4 09/15] x86/ptrace: Provide pt_regs helper for entry/exit Thomas Gleixner
2020-07-21 10:57 ` [patch V4 10/15] x86/entry: Use generic syscall entry function Thomas Gleixner
2020-07-21 21:47   ` Kees Cook
2020-07-22 18:25     ` Thomas Gleixner
2020-07-21 10:57 ` [patch V4 11/15] x86/entry: Use generic syscall exit functionality Thomas Gleixner
2020-07-21 21:47   ` Kees Cook
2020-07-21 10:57 ` [patch V4 12/15] x86/entry: Cleanup idtentry_entry/exit_user Thomas Gleixner
2020-07-21 21:48   ` Kees Cook
2020-07-21 10:57 ` [patch V4 13/15] x86/entry: Use generic interrupt entry/exit code Thomas Gleixner
2020-07-21 10:57 ` [patch V4 14/15] x86/entry: Cleanup idtentry_enter/exit Thomas Gleixner
2020-07-21 21:48   ` Kees Cook
2020-07-21 10:57 ` [patch V4 15/15] x86/kvm: Use generic exit to guest work function Thomas Gleixner
2020-07-21 20:27   ` Sean Christopherson
2020-07-22  7:40     ` Thomas Gleixner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200721110808.562407874@linutronix.de \
    --to=tglx@linutronix.de \
    --cc=arnd@arndb.de \
    --cc=keescook@chromium.org \
    --cc=keno@juliacomputing.com \
    --cc=krisman@collabora.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pbonzini@redhat.com \
    --cc=will@kernel.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).