LKML Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 0/7] interconnect: Introduce xlate_extended()
@ 2020-08-06 16:31 Georgi Djakov
  2020-08-06 16:31 ` [PATCH v2 1/7] interconnect: Introduce xlate_extended() callback Georgi Djakov
                   ` (6 more replies)
  0 siblings, 7 replies; 10+ messages in thread
From: Georgi Djakov @ 2020-08-06 16:31 UTC (permalink / raw)
  To: linux-pm, devicetree
  Cc: robh+dt, bjorn.andersson, sibis, mka, dianders, georgi.djakov,
	linux-kernel

Currently the interconnect framework provides the xlate() callback for
mapping the endpoints from phandle arguments in DT. This is implemented
by the provider drivers. But the endpoints (or the path between the
endpoints) might have an additional attributes, which should be parsed
and populated. During previous discussions [1], it was suggested that
adding more and more DT properties will not scale very well. So instead
of adding DT properties, such data should be put into the 'interconnects'
arguments.

This patchset is introducing a new xlate_extended() callback, which
would allow the interconnect provider drivers to parse additional data
(such as path tags) and allow the framework to make use of them.

Thanks to Sibi for the preliminary feedback and testing this patchset
on the sc7180 platform.

The patchset is based on linux-next (next-20200723).

Changelog:
v2:
* Add a patch to update the DT documentation, which i missed initially.
* Minor changes in commit text of patch 1/7. (Sibi)
* Remove a useless null check in patch 4/7. (Sibi)
* Print a warning if the number of DT args is higher than what we expect
  in patch 3/7. (Matthias)
* Pick Reviewed-by/Tested-by tags.
* TODO: Replace tag IDs with macros in patches 5/7 and 7/7 when [2] lands.

v1: http://lore.kernel.org/r/20200723130942.28491-1-georgi.djakov@linaro.org

[1] https://lore.kernel.org/linux-devicetree/20200519185836.GA469006@bogus/
[2] https://lore.kernel.org/r/20200801033215.1440-2-mdtipton@codeaurora.org

Georgi Djakov (5):
  interconnect: Introduce xlate_extended() callback
  dt-bindings: interconnect: Document the support of optional path tag
  interconnect: qcom: Implement xlate_extended() to parse tags
  interconnect: qcom: sdm845: Replace xlate with xlate_extended
  arm64: dts: qcom: sdm845: Increase the number of interconnect cells

Sibi Sankar (2):
  interconnect: qcom: sc7180: Replace xlate with xlate_extended
  arm64: dts: qcom: sc7180: Increase the number of interconnect cells

 .../bindings/interconnect/interconnect.txt    |  24 +-
 arch/arm64/boot/dts/qcom/sc7180.dtsi          | 216 +++++++++---------
 arch/arm64/boot/dts/qcom/sdm845.dtsi          |  44 ++--
 drivers/interconnect/core.c                   |  73 ++++--
 drivers/interconnect/qcom/icc-rpmh.c          |  27 +++
 drivers/interconnect/qcom/icc-rpmh.h          |   1 +
 drivers/interconnect/qcom/sc7180.c            |   2 +-
 drivers/interconnect/qcom/sdm845.c            |   2 +-
 include/linux/interconnect-provider.h         |  17 +-
 9 files changed, 248 insertions(+), 158 deletions(-)


^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 1/7] interconnect: Introduce xlate_extended() callback
  2020-08-06 16:31 [PATCH v2 0/7] interconnect: Introduce xlate_extended() Georgi Djakov
@ 2020-08-06 16:31 ` Georgi Djakov
  2020-08-06 16:31 ` [PATCH v2 2/7] dt-bindings: interconnect: Document the support of optional path tag Georgi Djakov
                   ` (5 subsequent siblings)
  6 siblings, 0 replies; 10+ messages in thread
From: Georgi Djakov @ 2020-08-06 16:31 UTC (permalink / raw)
  To: linux-pm, devicetree
  Cc: robh+dt, bjorn.andersson, sibis, mka, dianders, georgi.djakov,
	linux-kernel

Currently there is the xlate() callback, which is used by providers for
mapping the nodes from phandle arguments. That's fine for simple mappings,
but the phandle arguments could contain an additional data, such as tag
information. Let's create another callback xlate_extended() for the cases
where providers want also populate the path tag data.

Tested-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
 drivers/interconnect/core.c           | 73 ++++++++++++++++++---------
 include/linux/interconnect-provider.h | 17 ++++++-
 2 files changed, 65 insertions(+), 25 deletions(-)

diff --git a/drivers/interconnect/core.c b/drivers/interconnect/core.c
index befd111049c0..6ccf55818e68 100644
--- a/drivers/interconnect/core.c
+++ b/drivers/interconnect/core.c
@@ -336,12 +336,13 @@ EXPORT_SYMBOL_GPL(of_icc_xlate_onecell);
  * Looks for interconnect provider under the node specified by @spec and if
  * found, uses xlate function of the provider to map phandle args to node.
  *
- * Returns a valid pointer to struct icc_node on success or ERR_PTR()
+ * Returns a valid pointer to struct icc_node_data on success or ERR_PTR()
  * on failure.
  */
-struct icc_node *of_icc_get_from_provider(struct of_phandle_args *spec)
+struct icc_node_data *of_icc_get_from_provider(struct of_phandle_args *spec)
 {
 	struct icc_node *node = ERR_PTR(-EPROBE_DEFER);
+	struct icc_node_data *data = NULL;
 	struct icc_provider *provider;
 
 	if (!spec)
@@ -349,14 +350,33 @@ struct icc_node *of_icc_get_from_provider(struct of_phandle_args *spec)
 
 	mutex_lock(&icc_lock);
 	list_for_each_entry(provider, &icc_providers, provider_list) {
-		if (provider->dev->of_node == spec->np)
-			node = provider->xlate(spec, provider->data);
-		if (!IS_ERR(node))
-			break;
+		if (provider->dev->of_node == spec->np) {
+			if (provider->xlate_extended) {
+				data = provider->xlate_extended(spec, provider->data);
+				if (!IS_ERR(data)) {
+					node = data->node;
+					break;
+				}
+			} else {
+				node = provider->xlate(spec, provider->data);
+				if (!IS_ERR(node))
+					break;
+			}
+		}
 	}
 	mutex_unlock(&icc_lock);
 
-	return node;
+	if (IS_ERR(node))
+		return ERR_CAST(node);
+
+	if (!data) {
+		data = kzalloc(sizeof(*data), GFP_KERNEL);
+		if (!data)
+			return ERR_PTR(-ENOMEM);
+		data->node = node;
+	}
+
+	return data;
 }
 EXPORT_SYMBOL_GPL(of_icc_get_from_provider);
 
@@ -403,7 +423,7 @@ EXPORT_SYMBOL_GPL(devm_of_icc_get);
 struct icc_path *of_icc_get_by_index(struct device *dev, int idx)
 {
 	struct icc_path *path;
-	struct icc_node *src_node, *dst_node;
+	struct icc_node_data *src_data, *dst_data;
 	struct device_node *np;
 	struct of_phandle_args src_args, dst_args;
 	int ret;
@@ -441,39 +461,46 @@ struct icc_path *of_icc_get_by_index(struct device *dev, int idx)
 
 	of_node_put(dst_args.np);
 
-	src_node = of_icc_get_from_provider(&src_args);
+	src_data = of_icc_get_from_provider(&src_args);
 
-	if (IS_ERR(src_node)) {
-		if (PTR_ERR(src_node) != -EPROBE_DEFER)
+	if (IS_ERR(src_data)) {
+		if (PTR_ERR(src_data) != -EPROBE_DEFER)
 			dev_err(dev, "error finding src node: %ld\n",
-				PTR_ERR(src_node));
-		return ERR_CAST(src_node);
+				PTR_ERR(src_data));
+		return ERR_CAST(src_data);
 	}
 
-	dst_node = of_icc_get_from_provider(&dst_args);
+	dst_data = of_icc_get_from_provider(&dst_args);
 
-	if (IS_ERR(dst_node)) {
-		if (PTR_ERR(dst_node) != -EPROBE_DEFER)
+	if (IS_ERR(dst_data)) {
+		if (PTR_ERR(dst_data) != -EPROBE_DEFER)
 			dev_err(dev, "error finding dst node: %ld\n",
-				PTR_ERR(dst_node));
-		return ERR_CAST(dst_node);
+				PTR_ERR(dst_data));
+		kfree(src_data);
+		return ERR_CAST(dst_data);
 	}
 
 	mutex_lock(&icc_lock);
-	path = path_find(dev, src_node, dst_node);
+	path = path_find(dev, src_data->node, dst_data->node);
 	mutex_unlock(&icc_lock);
 	if (IS_ERR(path)) {
 		dev_err(dev, "%s: invalid path=%ld\n", __func__, PTR_ERR(path));
-		return path;
+		goto free_icc_data;
 	}
 
+	if (src_data->tag && src_data->tag == dst_data->tag)
+		icc_set_tag(path, src_data->tag);
+
 	path->name = kasprintf(GFP_KERNEL, "%s-%s",
-			       src_node->name, dst_node->name);
+			       src_data->node->name, dst_data->node->name);
 	if (!path->name) {
 		kfree(path);
-		return ERR_PTR(-ENOMEM);
+		path = ERR_PTR(-ENOMEM);
 	}
 
+free_icc_data:
+	kfree(src_data);
+	kfree(dst_data);
 	return path;
 }
 EXPORT_SYMBOL_GPL(of_icc_get_by_index);
@@ -975,7 +1002,7 @@ int icc_provider_add(struct icc_provider *provider)
 {
 	if (WARN_ON(!provider->set))
 		return -EINVAL;
-	if (WARN_ON(!provider->xlate))
+	if (WARN_ON(!provider->xlate && !provider->xlate_extended))
 		return -EINVAL;
 
 	mutex_lock(&icc_lock);
diff --git a/include/linux/interconnect-provider.h b/include/linux/interconnect-provider.h
index 4735518de515..4d535fddd5d3 100644
--- a/include/linux/interconnect-provider.h
+++ b/include/linux/interconnect-provider.h
@@ -14,6 +14,17 @@
 struct icc_node;
 struct of_phandle_args;
 
+/**
+ * struct icc_node_data - icc node data
+ *
+ * @node: icc node
+ * @tag: tag
+ */
+struct icc_node_data {
+	struct icc_node *node;
+	u32 tag;
+};
+
 /**
  * struct icc_onecell_data - driver data for onecell interconnect providers
  *
@@ -39,6 +50,7 @@ struct icc_node *of_icc_xlate_onecell(struct of_phandle_args *spec,
  * @pre_aggregate: pointer to device specific function that is called
  *		   before the aggregation begins (optional)
  * @xlate: provider-specific callback for mapping nodes from phandle arguments
+ * @xlate_extended: vendor-specific callback for mapping node data from phandle arguments
  * @dev: the device this interconnect provider belongs to
  * @users: count of active users
  * @inter_set: whether inter-provider pairs will be configured with @set
@@ -52,6 +64,7 @@ struct icc_provider {
 			 u32 peak_bw, u32 *agg_avg, u32 *agg_peak);
 	void (*pre_aggregate)(struct icc_node *node);
 	struct icc_node* (*xlate)(struct of_phandle_args *spec, void *data);
+	struct icc_node_data* (*xlate_extended)(struct of_phandle_args *spec, void *data);
 	struct device		*dev;
 	int			users;
 	bool			inter_set;
@@ -105,7 +118,7 @@ void icc_node_del(struct icc_node *node);
 int icc_nodes_remove(struct icc_provider *provider);
 int icc_provider_add(struct icc_provider *provider);
 int icc_provider_del(struct icc_provider *provider);
-struct icc_node *of_icc_get_from_provider(struct of_phandle_args *spec);
+struct icc_node_data *of_icc_get_from_provider(struct of_phandle_args *spec);
 
 #else
 
@@ -157,7 +170,7 @@ static inline int icc_provider_del(struct icc_provider *provider)
 	return -ENOTSUPP;
 }
 
-static inline struct icc_node *of_icc_get_from_provider(struct of_phandle_args *spec)
+static inline struct icc_node_data *of_icc_get_from_provider(struct of_phandle_args *spec)
 {
 	return ERR_PTR(-ENOTSUPP);
 }

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 2/7] dt-bindings: interconnect: Document the support of optional path tag
  2020-08-06 16:31 [PATCH v2 0/7] interconnect: Introduce xlate_extended() Georgi Djakov
  2020-08-06 16:31 ` [PATCH v2 1/7] interconnect: Introduce xlate_extended() callback Georgi Djakov
@ 2020-08-06 16:31 ` Georgi Djakov
  2020-08-17 21:55   ` Rob Herring
  2020-08-06 16:31 ` [PATCH v2 3/7] interconnect: qcom: Implement xlate_extended() to parse tags Georgi Djakov
                   ` (4 subsequent siblings)
  6 siblings, 1 reply; 10+ messages in thread
From: Georgi Djakov @ 2020-08-06 16:31 UTC (permalink / raw)
  To: linux-pm, devicetree
  Cc: robh+dt, bjorn.andersson, sibis, mka, dianders, georgi.djakov,
	linux-kernel

Let's document that we now support specifying path tag information in the
arg cells of the 'interconnects' DT property. This information would be
populated when the xlate_extended() callback is used.

Specifying the tag in DT will allow the interconnect framework to do the
aggregation based on the tag automatically. The users can still use the
icc_set_tag() API if/when needed.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
 .../bindings/interconnect/interconnect.txt    | 24 ++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/interconnect/interconnect.txt b/Documentation/devicetree/bindings/interconnect/interconnect.txt
index 6f5d23a605b7..138c544c8c8c 100644
--- a/Documentation/devicetree/bindings/interconnect/interconnect.txt
+++ b/Documentation/devicetree/bindings/interconnect/interconnect.txt
@@ -19,7 +19,8 @@ directly.
 Required properties:
 - compatible : contains the interconnect provider compatible string
 - #interconnect-cells : number of cells in a interconnect specifier needed to
-			encode the interconnect node id
+			encode the interconnect node id and optionally add a
+			path tag
 
 Example:
 
@@ -44,6 +45,10 @@ components it has to interact with.
 Required properties:
 interconnects : Pairs of phandles and interconnect provider specifier to denote
 	        the edge source and destination ports of the interconnect path.
+		An optional path tag value could specified as additional argument
+		to both endpoints and in such cases, this information will be passed
+		to the interconnect framework to do aggregation based on the attached
+		tag.
 
 Optional properties:
 interconnect-names : List of interconnect path name strings sorted in the same
@@ -62,3 +67,20 @@ Example:
 		interconnects = <&pnoc MASTER_SDCC_1 &bimc SLAVE_EBI_CH0>;
 		interconnect-names = "sdhc-mem";
 	};
+
+Example with path tags:
+
+	gnoc: interconnect@17900000 {
+		...
+		interconnect-cells = <2>;
+	};
+
+	mnoc: interconnect@1380000 {
+		...
+		interconnect-cells = <2>;
+	};
+
+	cpu@0 {
+		...
+		interconnects = <&gnoc MASTER_APPSS_PROC 3 &mnoc SLAVE_EBI1 3>;
+	}

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 3/7] interconnect: qcom: Implement xlate_extended() to parse tags
  2020-08-06 16:31 [PATCH v2 0/7] interconnect: Introduce xlate_extended() Georgi Djakov
  2020-08-06 16:31 ` [PATCH v2 1/7] interconnect: Introduce xlate_extended() callback Georgi Djakov
  2020-08-06 16:31 ` [PATCH v2 2/7] dt-bindings: interconnect: Document the support of optional path tag Georgi Djakov
@ 2020-08-06 16:31 ` Georgi Djakov
  2020-08-06 16:31 ` [PATCH v2 4/7] interconnect: qcom: sdm845: Replace xlate with xlate_extended Georgi Djakov
                   ` (3 subsequent siblings)
  6 siblings, 0 replies; 10+ messages in thread
From: Georgi Djakov @ 2020-08-06 16:31 UTC (permalink / raw)
  To: linux-pm, devicetree
  Cc: robh+dt, bjorn.andersson, sibis, mka, dianders, georgi.djakov,
	linux-kernel

Implement a function to parse the arguments of the "interconnects" DT
property and populate the interconnect path tags if this information
is available.

Tested-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
 drivers/interconnect/qcom/icc-rpmh.c | 27 +++++++++++++++++++++++++++
 drivers/interconnect/qcom/icc-rpmh.h |  1 +
 2 files changed, 28 insertions(+)

diff --git a/drivers/interconnect/qcom/icc-rpmh.c b/drivers/interconnect/qcom/icc-rpmh.c
index 3ac5182c9ab2..7e538155e486 100644
--- a/drivers/interconnect/qcom/icc-rpmh.c
+++ b/drivers/interconnect/qcom/icc-rpmh.c
@@ -6,6 +6,8 @@
 #include <linux/interconnect.h>
 #include <linux/interconnect-provider.h>
 #include <linux/module.h>
+#include <linux/of.h>
+#include <linux/slab.h>
 
 #include "bcm-voter.h"
 #include "icc-rpmh.h"
@@ -92,6 +94,31 @@ int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
 }
 EXPORT_SYMBOL_GPL(qcom_icc_set);
 
+struct icc_node_data *qcom_icc_xlate_extended(struct of_phandle_args *spec, void *data)
+{
+	struct icc_node_data *ndata;
+	struct icc_node *node;
+
+	node = of_icc_xlate_onecell(spec, data);
+	if (IS_ERR(node))
+		return ERR_CAST(node);
+
+	ndata = kzalloc(sizeof(*ndata), GFP_KERNEL);
+	if (!ndata)
+		return ERR_PTR(-ENOMEM);
+
+	ndata->node = node;
+
+	if (spec->args_count == 2)
+		ndata->tag = spec->args[1];
+
+	if (spec->args_count > 2)
+		pr_warn("%pOF: Too many arguments, path tag is not parsed\n", spec->np);
+
+	return ndata;
+}
+EXPORT_SYMBOL_GPL(qcom_icc_xlate_extended);
+
 /**
  * qcom_icc_bcm_init - populates bcm aux data and connect qnodes
  * @bcm: bcm to be initialized
diff --git a/drivers/interconnect/qcom/icc-rpmh.h b/drivers/interconnect/qcom/icc-rpmh.h
index 903d25e61984..1dac39bc255d 100644
--- a/drivers/interconnect/qcom/icc-rpmh.h
+++ b/drivers/interconnect/qcom/icc-rpmh.h
@@ -143,6 +143,7 @@ struct qcom_icc_desc {
 int qcom_icc_aggregate(struct icc_node *node, u32 tag, u32 avg_bw,
 		       u32 peak_bw, u32 *agg_avg, u32 *agg_peak);
 int qcom_icc_set(struct icc_node *src, struct icc_node *dst);
+struct icc_node_data *qcom_icc_xlate_extended(struct of_phandle_args *spec, void *data);
 int qcom_icc_bcm_init(struct qcom_icc_bcm *bcm, struct device *dev);
 void qcom_icc_pre_aggregate(struct icc_node *node);
 

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 4/7] interconnect: qcom: sdm845: Replace xlate with xlate_extended
  2020-08-06 16:31 [PATCH v2 0/7] interconnect: Introduce xlate_extended() Georgi Djakov
                   ` (2 preceding siblings ...)
  2020-08-06 16:31 ` [PATCH v2 3/7] interconnect: qcom: Implement xlate_extended() to parse tags Georgi Djakov
@ 2020-08-06 16:31 ` Georgi Djakov
  2020-08-06 16:31 ` [PATCH v2 5/7] arm64: dts: qcom: sdm845: Increase the number of interconnect cells Georgi Djakov
                   ` (2 subsequent siblings)
  6 siblings, 0 replies; 10+ messages in thread
From: Georgi Djakov @ 2020-08-06 16:31 UTC (permalink / raw)
  To: linux-pm, devicetree
  Cc: robh+dt, bjorn.andersson, sibis, mka, dianders, georgi.djakov,
	linux-kernel

Use the qcom_icc_xlate_extended() in order to parse tags, that are
specified as an additional arguments to the path endpoints in DT.

Tested-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
 drivers/interconnect/qcom/sdm845.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/interconnect/qcom/sdm845.c b/drivers/interconnect/qcom/sdm845.c
index f6c7b969520d..3b81dbb71b0b 100644
--- a/drivers/interconnect/qcom/sdm845.c
+++ b/drivers/interconnect/qcom/sdm845.c
@@ -469,7 +469,7 @@ static int qnoc_probe(struct platform_device *pdev)
 	provider->set = qcom_icc_set;
 	provider->pre_aggregate = qcom_icc_pre_aggregate;
 	provider->aggregate = qcom_icc_aggregate;
-	provider->xlate = of_icc_xlate_onecell;
+	provider->xlate_extended = qcom_icc_xlate_extended;
 	INIT_LIST_HEAD(&provider->nodes);
 	provider->data = data;
 

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 5/7] arm64: dts: qcom: sdm845: Increase the number of interconnect cells
  2020-08-06 16:31 [PATCH v2 0/7] interconnect: Introduce xlate_extended() Georgi Djakov
                   ` (3 preceding siblings ...)
  2020-08-06 16:31 ` [PATCH v2 4/7] interconnect: qcom: sdm845: Replace xlate with xlate_extended Georgi Djakov
@ 2020-08-06 16:31 ` Georgi Djakov
  2020-08-19 20:07   ` Doug Anderson
  2020-08-06 16:31 ` [PATCH v2 6/7] interconnect: qcom: sc7180: Replace xlate with xlate_extended Georgi Djakov
  2020-08-06 16:31 ` [PATCH v2 7/7] arm64: dts: qcom: sc7180: Increase the number of interconnect cells Georgi Djakov
  6 siblings, 1 reply; 10+ messages in thread
From: Georgi Djakov @ 2020-08-06 16:31 UTC (permalink / raw)
  To: linux-pm, devicetree
  Cc: robh+dt, bjorn.andersson, sibis, mka, dianders, georgi.djakov,
	linux-kernel

Increase the number of interconnect-cells, as now we can include
the tag information. The consumers can specify the path tag as an
additional argument to the endpoints.

Tested-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 44 ++++++++++++++--------------
 1 file changed, 22 insertions(+), 22 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index e506793407d8..94f5d27f2927 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -200,7 +200,7 @@ &LITTLE_CPU_SLEEP_1
 			dynamic-power-coefficient = <100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_0>;
@@ -225,7 +225,7 @@ &LITTLE_CPU_SLEEP_1
 			dynamic-power-coefficient = <100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_100>;
@@ -247,7 +247,7 @@ &LITTLE_CPU_SLEEP_1
 			dynamic-power-coefficient = <100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_200>;
@@ -269,7 +269,7 @@ &LITTLE_CPU_SLEEP_1
 			dynamic-power-coefficient = <100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_300>;
@@ -291,7 +291,7 @@ &BIG_CPU_SLEEP_1
 			dynamic-power-coefficient = <396>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_400>;
@@ -313,7 +313,7 @@ &BIG_CPU_SLEEP_1
 			dynamic-power-coefficient = <396>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_500>;
@@ -335,7 +335,7 @@ &BIG_CPU_SLEEP_1
 			dynamic-power-coefficient = <396>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_600>;
@@ -357,7 +357,7 @@ &BIG_CPU_SLEEP_1
 			dynamic-power-coefficient = <396>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
-			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_700>;
@@ -2011,49 +2011,49 @@ pcie1_lane: lanes@1c06200 {
 		mem_noc: interconnect@1380000 {
 			compatible = "qcom,sdm845-mem-noc";
 			reg = <0 0x01380000 0 0x27200>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		dc_noc: interconnect@14e0000 {
 			compatible = "qcom,sdm845-dc-noc";
 			reg = <0 0x014e0000 0 0x400>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		config_noc: interconnect@1500000 {
 			compatible = "qcom,sdm845-config-noc";
 			reg = <0 0x01500000 0 0x5080>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		system_noc: interconnect@1620000 {
 			compatible = "qcom,sdm845-system-noc";
 			reg = <0 0x01620000 0 0x18080>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		aggre1_noc: interconnect@16e0000 {
 			compatible = "qcom,sdm845-aggre1-noc";
 			reg = <0 0x016e0000 0 0x15080>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		aggre2_noc: interconnect@1700000 {
 			compatible = "qcom,sdm845-aggre2-noc";
 			reg = <0 0x01700000 0 0x1f300>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		mmss_noc: interconnect@1740000 {
 			compatible = "qcom,sdm845-mmss-noc";
 			reg = <0 0x01740000 0 0x1c100>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
@@ -2156,8 +2156,8 @@ ipa: ipa@1e40000 {
 			clocks = <&rpmhcc RPMH_IPA_CLK>;
 			clock-names = "core";
 
-			interconnects = <&aggre2_noc MASTER_IPA &mem_noc SLAVE_EBI1>,
-				        <&aggre2_noc MASTER_IPA &system_noc SLAVE_IMEM>,
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mem_noc SLAVE_EBI1 0>,
+					<&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
 					<&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>;
 			interconnect-names = "memory",
 					     "imem",
@@ -3561,8 +3561,8 @@ usb_1: usb@a6f8800 {
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
-			interconnects = <&aggre2_noc MASTER_USB3_0 &mem_noc SLAVE_EBI1>,
-					<&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3_0>;
+			interconnects = <&aggre2_noc MASTER_USB3_0 0 &mem_noc SLAVE_EBI1 0>,
+					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
 			usb_1_dwc3: dwc3@a600000 {
@@ -3609,8 +3609,8 @@ usb_2: usb@a8f8800 {
 
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 
-			interconnects = <&aggre2_noc MASTER_USB3_1 &mem_noc SLAVE_EBI1>,
-					<&gladiator_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3_1>;
+			interconnects = <&aggre2_noc MASTER_USB3_1 0 &mem_noc SLAVE_EBI1 0>,
+					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
 			usb_2_dwc3: dwc3@a800000 {
@@ -4306,7 +4306,7 @@ lpasscc: clock-controller@17014000 {
 		gladiator_noc: interconnect@17900000 {
 			compatible = "qcom,sdm845-gladiator-noc";
 			reg = <0 0x17900000 0 0xd080>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 6/7] interconnect: qcom: sc7180: Replace xlate with xlate_extended
  2020-08-06 16:31 [PATCH v2 0/7] interconnect: Introduce xlate_extended() Georgi Djakov
                   ` (4 preceding siblings ...)
  2020-08-06 16:31 ` [PATCH v2 5/7] arm64: dts: qcom: sdm845: Increase the number of interconnect cells Georgi Djakov
@ 2020-08-06 16:31 ` Georgi Djakov
  2020-08-06 16:31 ` [PATCH v2 7/7] arm64: dts: qcom: sc7180: Increase the number of interconnect cells Georgi Djakov
  6 siblings, 0 replies; 10+ messages in thread
From: Georgi Djakov @ 2020-08-06 16:31 UTC (permalink / raw)
  To: linux-pm, devicetree
  Cc: robh+dt, bjorn.andersson, sibis, mka, dianders, georgi.djakov,
	linux-kernel

From: Sibi Sankar <sibis@codeaurora.org>

Use the qcom_icc_xlate_extended() in order to parse tags, that are
specified as an additional arguments to the path endpoints in DT.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
 drivers/interconnect/qcom/sc7180.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/interconnect/qcom/sc7180.c b/drivers/interconnect/qcom/sc7180.c
index dcf493d07928..a6f119f363b1 100644
--- a/drivers/interconnect/qcom/sc7180.c
+++ b/drivers/interconnect/qcom/sc7180.c
@@ -535,7 +535,7 @@ static int qnoc_probe(struct platform_device *pdev)
 	provider->set = qcom_icc_set;
 	provider->pre_aggregate = qcom_icc_pre_aggregate;
 	provider->aggregate = qcom_icc_aggregate;
-	provider->xlate = of_icc_xlate_onecell;
+	provider->xlate_extended = qcom_icc_xlate_extended;
 	INIT_LIST_HEAD(&provider->nodes);
 	provider->data = data;
 

^ permalink raw reply	[flat|nested] 10+ messages in thread

* [PATCH v2 7/7] arm64: dts: qcom: sc7180: Increase the number of interconnect cells
  2020-08-06 16:31 [PATCH v2 0/7] interconnect: Introduce xlate_extended() Georgi Djakov
                   ` (5 preceding siblings ...)
  2020-08-06 16:31 ` [PATCH v2 6/7] interconnect: qcom: sc7180: Replace xlate with xlate_extended Georgi Djakov
@ 2020-08-06 16:31 ` Georgi Djakov
  6 siblings, 0 replies; 10+ messages in thread
From: Georgi Djakov @ 2020-08-06 16:31 UTC (permalink / raw)
  To: linux-pm, devicetree
  Cc: robh+dt, bjorn.andersson, sibis, mka, dianders, georgi.djakov,
	linux-kernel

From: Sibi Sankar <sibis@codeaurora.org>

Increase the number of interconnect-cells, as now we can include
the tag information. The consumers can specify the path tag as an
additional argument to the endpoints.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 216 +++++++++++++--------------
 1 file changed, 108 insertions(+), 108 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 16df08d9ef8f..fe80e1b8acee 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -132,7 +132,7 @@ &LITTLE_CPU_SLEEP_1
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			next-level-cache = <&L2_0>;
 			#cooling-cells = <2>;
@@ -158,7 +158,7 @@ &LITTLE_CPU_SLEEP_1
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_100>;
 			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -180,7 +180,7 @@ &LITTLE_CPU_SLEEP_1
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_200>;
 			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -202,7 +202,7 @@ &LITTLE_CPU_SLEEP_1
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_300>;
 			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -224,7 +224,7 @@ &LITTLE_CPU_SLEEP_1
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_400>;
 			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -246,7 +246,7 @@ &LITTLE_CPU_SLEEP_1
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_500>;
 			operating-points-v2 = <&cpu0_opp_table>;
-			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -268,7 +268,7 @@ &BIG_CPU_SLEEP_1
 			dynamic-power-coefficient = <405>;
 			next-level-cache = <&L2_600>;
 			operating-points-v2 = <&cpu6_opp_table>;
-			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
@@ -290,7 +290,7 @@ &BIG_CPU_SLEEP_1
 			dynamic-power-coefficient = <405>;
 			next-level-cache = <&L2_700>;
 			operating-points-v2 = <&cpu6_opp_table>;
-			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
 					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
@@ -742,7 +742,7 @@ qupv3_id_0: geniqup@8c0000 {
 			#size-cells = <2>;
 			ranges;
 			iommus = <&apps_smmu 0x43 0x0>;
-			interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>;
+			interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>;
 			interconnect-names = "qup-core";
 			status = "disabled";
 
@@ -756,9 +756,9 @@ i2c0: i2c@880000 {
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
-						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -776,8 +776,8 @@ spi0: spi@880000 {
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -792,8 +792,8 @@ uart0: serial@880000 {
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -808,9 +808,9 @@ i2c1: i2c@884000 {
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
-						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -828,8 +828,8 @@ spi1: spi@884000 {
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -844,8 +844,8 @@ uart1: serial@884000 {
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -860,9 +860,9 @@ i2c2: i2c@888000 {
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
-						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -878,8 +878,8 @@ uart2: serial@888000 {
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -894,9 +894,9 @@ i2c3: i2c@88c000 {
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
-						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -914,8 +914,8 @@ spi3: spi@88c000 {
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -930,8 +930,8 @@ uart3: serial@88c000 {
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -946,9 +946,9 @@ i2c4: i2c@890000 {
 				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
-						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -964,8 +964,8 @@ uart4: serial@890000 {
 				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -980,9 +980,9 @@ i2c5: i2c@894000 {
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
-						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -1000,8 +1000,8 @@ spi5: spi@894000 {
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1016,8 +1016,8 @@ uart5: serial@894000 {
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1033,7 +1033,7 @@ qupv3_id_1: geniqup@ac0000 {
 			#size-cells = <2>;
 			ranges;
 			iommus = <&apps_smmu 0x4c3 0x0>;
-			interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>;
+			interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>;
 			interconnect-names = "qup-core";
 			status = "disabled";
 
@@ -1047,9 +1047,9 @@ i2c6: i2c@a80000 {
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
-						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -1067,8 +1067,8 @@ spi6: spi@a80000 {
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1083,8 +1083,8 @@ uart6: serial@a80000 {
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1099,9 +1099,9 @@ i2c7: i2c@a84000 {
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
-						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -1117,8 +1117,8 @@ uart7: serial@a84000 {
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1133,9 +1133,9 @@ i2c8: i2c@a88000 {
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
-						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -1153,8 +1153,8 @@ spi8: spi@a88000 {
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1169,8 +1169,8 @@ uart8: serial@a88000 {
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1185,9 +1185,9 @@ i2c9: i2c@a8c000 {
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
-						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -1203,8 +1203,8 @@ uart9: serial@a8c000 {
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1219,9 +1219,9 @@ i2c10: i2c@a90000 {
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
-						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -1239,8 +1239,8 @@ spi10: spi@a90000 {
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1255,8 +1255,8 @@ uart10: serial@a90000 {
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1271,9 +1271,9 @@ i2c11: i2c@a94000 {
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
-						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config",
 							"qup-memory";
 				status = "disabled";
@@ -1291,8 +1291,8 @@ spi11: spi@a94000 {
 				#size-cells = <0>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1307,8 +1307,8 @@ uart11: serial@a94000 {
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SC7180_CX>;
 				operating-points-v2 = <&qup_opp_table>;
-				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
-						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
+						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
@@ -1317,63 +1317,63 @@ uart11: serial@a94000 {
 		config_noc: interconnect@1500000 {
 			compatible = "qcom,sc7180-config-noc";
 			reg = <0 0x01500000 0 0x28000>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		system_noc: interconnect@1620000 {
 			compatible = "qcom,sc7180-system-noc";
 			reg = <0 0x01620000 0 0x17080>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		mc_virt: interconnect@1638000 {
 			compatible = "qcom,sc7180-mc-virt";
 			reg = <0 0x01638000 0 0x1000>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		qup_virt: interconnect@1650000 {
 			compatible = "qcom,sc7180-qup-virt";
 			reg = <0 0x01650000 0 0x1000>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		aggre1_noc: interconnect@16e0000 {
 			compatible = "qcom,sc7180-aggre1-noc";
 			reg = <0 0x016e0000 0 0x15080>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		aggre2_noc: interconnect@1705000 {
 			compatible = "qcom,sc7180-aggre2-noc";
 			reg = <0 0x01705000 0 0x9000>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		compute_noc: interconnect@170e000 {
 			compatible = "qcom,sc7180-compute-noc";
 			reg = <0 0x0170e000 0 0x6000>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		mmss_noc: interconnect@1740000 {
 			compatible = "qcom,sc7180-mmss-noc";
 			reg = <0 0x01740000 0 0x1c100>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		ipa_virt: interconnect@1e00000 {
 			compatible = "qcom,sc7180-ipa-virt";
 			reg = <0 0x01e00000 0 0x1000>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
@@ -1400,9 +1400,9 @@ ipa: ipa@1e40000 {
 			clocks = <&rpmhcc RPMH_IPA_CLK>;
 			clock-names = "core";
 
-			interconnects = <&aggre2_noc MASTER_IPA &mc_virt SLAVE_EBI1>,
-				        <&aggre2_noc MASTER_IPA &system_noc SLAVE_IMEM>,
-					<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_IPA_CFG>;
+			interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>,
+					<&aggre2_noc MASTER_IPA 0 &system_noc SLAVE_IMEM 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>;
 			interconnect-names = "memory",
 					     "imem",
 					     "config";
@@ -2526,8 +2526,8 @@ qspi: spi@88dc000 {
 			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
 				 <&gcc GCC_QSPI_CORE_CLK>;
 			clock-names = "iface", "core";
-			interconnects = <&gem_noc MASTER_APPSS_PROC
-					&config_noc SLAVE_QSPI_0>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 0
+					&config_noc SLAVE_QSPI_0 0>;
 			interconnect-names = "qspi-config";
 			power-domains = <&rpmhpd SC7180_CX>;
 			operating-points-v2 = <&qspi_opp_table>;
@@ -2586,7 +2586,7 @@ usb_1_ssphy: phy@88e9200 {
 		dc_noc: interconnect@9160000 {
 			compatible = "qcom,sc7180-dc-noc";
 			reg = <0 0x09160000 0 0x03200>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
@@ -2600,14 +2600,14 @@ system-cache-controller@9200000 {
 		gem_noc: interconnect@9680000 {
 			compatible = "qcom,sc7180-gem-noc";
 			reg = <0 0x09680000 0 0x3e200>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
 		npu_noc: interconnect@9990000 {
 			compatible = "qcom,sc7180-npu-noc";
 			reg = <0 0x09990000 0 0x1600>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
@@ -2643,8 +2643,8 @@ usb_1: usb@a6f8800 {
 
 			resets = <&gcc GCC_USB30_PRIM_BCR>;
 
-			interconnects = <&aggre2_noc MASTER_USB3 &mc_virt SLAVE_EBI1>,
-					<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_USB3>;
+			interconnects = <&aggre2_noc MASTER_USB3 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
 			usb_1_dwc3: dwc3@a600000 {
@@ -2675,8 +2675,8 @@ venus: video-codec@aa00000 {
 				      "vcodec0_core", "vcodec0_bus";
 			iommus = <&apps_smmu 0x0c00 0x60>;
 			memory-region = <&venus_mem>;
-			interconnects = <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI1>,
-					<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_VENUS_CFG>;
+			interconnects = <&mmss_noc MASTER_VIDEO_P0 0 &mc_virt SLAVE_EBI1 0>,
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>;
 			interconnect-names = "video-mem", "cpu-cfg";
 
 			video-decoder {
@@ -2701,7 +2701,7 @@ videocc: clock-controller@ab00000 {
 		camnoc_virt: interconnect@ac00000 {
 			compatible = "qcom,sc7180-camnoc-virt";
 			reg = <0 0x0ac00000 0 0x1000>;
-			#interconnect-cells = <1>;
+			#interconnect-cells = <2>;
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 2/7] dt-bindings: interconnect: Document the support of optional path tag
  2020-08-06 16:31 ` [PATCH v2 2/7] dt-bindings: interconnect: Document the support of optional path tag Georgi Djakov
@ 2020-08-17 21:55   ` Rob Herring
  0 siblings, 0 replies; 10+ messages in thread
From: Rob Herring @ 2020-08-17 21:55 UTC (permalink / raw)
  To: Georgi Djakov
  Cc: devicetree, sibis, dianders, linux-kernel, robh+dt, mka,
	bjorn.andersson, linux-pm

On Thu, 06 Aug 2020 19:31:21 +0300, Georgi Djakov wrote:
> Let's document that we now support specifying path tag information in the
> arg cells of the 'interconnects' DT property. This information would be
> populated when the xlate_extended() callback is used.
> 
> Specifying the tag in DT will allow the interconnect framework to do the
> aggregation based on the tag automatically. The users can still use the
> icc_set_tag() API if/when needed.
> 
> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
> ---
>  .../bindings/interconnect/interconnect.txt    | 24 ++++++++++++++++++-
>  1 file changed, 23 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: [PATCH v2 5/7] arm64: dts: qcom: sdm845: Increase the number of interconnect cells
  2020-08-06 16:31 ` [PATCH v2 5/7] arm64: dts: qcom: sdm845: Increase the number of interconnect cells Georgi Djakov
@ 2020-08-19 20:07   ` Doug Anderson
  0 siblings, 0 replies; 10+ messages in thread
From: Doug Anderson @ 2020-08-19 20:07 UTC (permalink / raw)
  To: Georgi Djakov
  Cc: Linux PM,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	Rob Herring, Bjorn Andersson, Sibi Sankar, Matthias Kaehlcke,
	LKML

Hi,

On Thu, Aug 6, 2020 at 9:31 AM Georgi Djakov <georgi.djakov@linaro.org> wrote:
>
> Increase the number of interconnect-cells, as now we can include
> the tag information. The consumers can specify the path tag as an
> additional argument to the endpoints.
>
> Tested-by: Sibi Sankar <sibis@codeaurora.org>
> Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
> Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 44 ++++++++++++++--------------
>  1 file changed, 22 insertions(+), 22 deletions(-)

I believe you missed updating a few places...  Fixup can be found at
<https://crrev.com/c/2364731> or look carefully under "ipa@1e40000"
and "gpu@5000000".

-Doug

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, back to index

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-06 16:31 [PATCH v2 0/7] interconnect: Introduce xlate_extended() Georgi Djakov
2020-08-06 16:31 ` [PATCH v2 1/7] interconnect: Introduce xlate_extended() callback Georgi Djakov
2020-08-06 16:31 ` [PATCH v2 2/7] dt-bindings: interconnect: Document the support of optional path tag Georgi Djakov
2020-08-17 21:55   ` Rob Herring
2020-08-06 16:31 ` [PATCH v2 3/7] interconnect: qcom: Implement xlate_extended() to parse tags Georgi Djakov
2020-08-06 16:31 ` [PATCH v2 4/7] interconnect: qcom: sdm845: Replace xlate with xlate_extended Georgi Djakov
2020-08-06 16:31 ` [PATCH v2 5/7] arm64: dts: qcom: sdm845: Increase the number of interconnect cells Georgi Djakov
2020-08-19 20:07   ` Doug Anderson
2020-08-06 16:31 ` [PATCH v2 6/7] interconnect: qcom: sc7180: Replace xlate with xlate_extended Georgi Djakov
2020-08-06 16:31 ` [PATCH v2 7/7] arm64: dts: qcom: sc7180: Increase the number of interconnect cells Georgi Djakov

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git