[PATCH AUTOSEL 5.4 01/80] powerpc/powernv/smp: Fix spurious DBG() warning

[PATCH AUTOSEL 5.4 01/80] powerpc/powernv/smp: Fix spurious DBG() warning

[Sasha Levin]

From: Oliver O'Halloran <oohall@gmail.com>

[ Upstream commit f6bac19cf65c5be21d14a0c9684c8f560f2096dd ]

When building with W=1 we get the following warning:

 arch/powerpc/platforms/powernv/smp.c: In function ‘pnv_smp_cpu_kill_self’:
 arch/powerpc/platforms/powernv/smp.c:276:16: error: suggest braces around
 	empty body in an ‘if’ statement [-Werror=empty-body]
   276 |      cpu, srr1);
       |                ^
 cc1: all warnings being treated as errors

The full context is this block:

 if (srr1 && !generic_check_cpu_restart(cpu))
 	DBG("CPU%d Unexpected exit while offline srr1=%lx!\n",
 			cpu, srr1);

When building with DEBUG undefined DBG() expands to nothing and GCC emits
the warning due to the lack of braces around an empty statement.

Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200804005410.146094-2-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/powernv/smp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
index b2ba3e95bda73..bbf361f23ae86 100644
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -43,7 +43,7 @@
 #include <asm/udbg.h>
 #define DBG(fmt...) udbg_printf(fmt)
 #else
-#define DBG(fmt...)
+#define DBG(fmt...) do { } while (0)
 #endif
 
 static void pnv_smp_setup_cpu(int cpu)
-- 
2.25.1

[PATCH AUTOSEL 5.4 02/80] mm: fix exec activate_mm vs TLB shootdown and lazy tlb switching race

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit d53c3dfb23c45f7d4f910c3a3ca84bf0a99c6143 ]

Reading and modifying current->mm and current->active_mm and switching
mm should be done with irqs off, to prevent races seeing an intermediate
state.

This is similar to commit 38cf307c1f20 ("mm: fix kthread_use_mm() vs TLB
invalidate"). At exec-time when the new mm is activated, the old one
should usually be single-threaded and no longer used, unless something
else is holding an mm_users reference (which may be possible).

Absent other mm_users, there is also a race with preemption and lazy tlb
switching. Consider the kernel_execve case where the current thread is
using a lazy tlb active mm:

  call_usermodehelper()
    kernel_execve()
      old_mm = current->mm;
      active_mm = current->active_mm;
      *** preempt *** -------------------->  schedule()
                                               prev->active_mm = NULL;
                                               mmdrop(prev active_mm);
                                             ...
                      <--------------------  schedule()
      current->mm = mm;
      current->active_mm = mm;
      if (!old_mm)
          mmdrop(active_mm);

If we switch back to the kernel thread from a different mm, there is a
double free of the old active_mm, and a missing free of the new one.

Closing this race only requires interrupts to be disabled while ->mm
and ->active_mm are being switched, but the TLB problem requires also
holding interrupts off over activate_mm. Unfortunately not all archs
can do that yet, e.g., arm defers the switch if irqs are disabled and
expects finish_arch_post_lock_switch() to be called to complete the
flush; um takes a blocking lock in activate_mm().

So as a first step, disable interrupts across the mm/active_mm updates
to close the lazy tlb preempt race, and provide an arch option to
extend that to activate_mm which allows architectures doing IPI based
TLB shootdowns to close the second race.

This is a bit ugly, but in the interest of fixing the bug and backporting
before all architectures are converted this is a compromise.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200914045219.3736466-2-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/Kconfig |  7 +++++++
 fs/exec.c    | 17 +++++++++++++++--
 2 files changed, 22 insertions(+), 2 deletions(-)

diff --git a/arch/Kconfig b/arch/Kconfig
index 238dccfa76910..84653a823d3b0 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -405,6 +405,13 @@ config MMU_GATHER_NO_RANGE
 config HAVE_MMU_GATHER_NO_GATHER
 	bool
 
+config ARCH_WANT_IRQS_OFF_ACTIVATE_MM
+	bool
+	help
+	  Temporary select until all architectures can be converted to have
+	  irqs disabled over activate_mm. Architectures that do IPI based TLB
+	  shootdowns should enable this.
+
 config ARCH_HAVE_NMI_SAFE_CMPXCHG
 	bool
 
diff --git a/fs/exec.c b/fs/exec.c
index de833553ae27d..2441eb1a1e2d0 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1044,11 +1044,24 @@ static int exec_mmap(struct mm_struct *mm)
 	}
 
 	task_lock(tsk);
-	active_mm = tsk->active_mm;
 	membarrier_exec_mmap(mm);
-	tsk->mm = mm;
+
+	local_irq_disable();
+	active_mm = tsk->active_mm;
 	tsk->active_mm = mm;
+	tsk->mm = mm;
+	/*
+	 * This prevents preemption while active_mm is being loaded and
+	 * it and mm are being updated, which could cause problems for
+	 * lazy tlb mm refcounting when these are updated by context
+	 * switches. Not all architectures can handle irqs off over
+	 * activate_mm yet.
+	 */
+	if (!IS_ENABLED(CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM))
+		local_irq_enable();
 	activate_mm(active_mm, mm);
+	if (IS_ENABLED(CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM))
+		local_irq_enable();
 	tsk->mm->vmacache_seqnum = 0;
 	vmacache_flush(tsk);
 	task_unlock(tsk);
-- 
2.25.1

[PATCH AUTOSEL 5.4 03/80] powerpc: select ARCH_WANT_IRQS_OFF_ACTIVATE_MM

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 66acd46080bd9e5ad2be4b0eb1d498d5145d058e ]

powerpc uses IPIs in some situations to switch a kernel thread away
from a lazy tlb mm, which is subject to the TLB flushing race
described in the changelog introducing ARCH_WANT_IRQS_OFF_ACTIVATE_MM.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200914045219.3736466-3-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/Kconfig                   | 1 +
 arch/powerpc/include/asm/mmu_context.h | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index ad620637cbd11..27ef333e96f6d 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -147,6 +147,7 @@ config PPC
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF		if PPC64
 	select ARCH_WANT_IPC_PARSE_VERSION
+	select ARCH_WANT_IRQS_OFF_ACTIVATE_MM
 	select ARCH_WEAK_RELEASE_ACQUIRE
 	select BINFMT_ELF
 	select BUILDTIME_EXTABLE_SORT
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index 58efca9343113..f132b418a8c7a 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -216,7 +216,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
  */
 static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
 {
-	switch_mm(prev, next, current);
+	switch_mm_irqs_off(prev, next, current);
 }
 
 /* We don't currently use enter_lazy_tlb() for anything */
-- 
2.25.1

[PATCH AUTOSEL 5.4 04/80] sparc64: remove mm_cpumask clearing to fix kthread_use_mm race

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit bafb056ce27940c9994ea905336aa8f27b4f7275 ]

The de facto (and apparently uncommented) standard for using an mm had,
thanks to this code in sparc if nothing else, been that you must have a
reference on mm_users *and that reference must have been obtained with
mmget()*, i.e., from a thread with a reference to mm_users that had used
the mm.

The introduction of mmget_not_zero() in commit d2005e3f41d4
("userfaultfd: don't pin the user memory in userfaultfd_file_create()")
allowed mm_count holders to aoperate on user mappings asynchronously
from the actual threads using the mm, but they were not to load those
mappings into their TLB (i.e., walking vmas and page tables is okay,
kthread_use_mm() is not).

io_uring 2b188cc1bb857 ("Add io_uring IO interface") added code which
does a kthread_use_mm() from a mmget_not_zero() refcount.

The problem with this is code which previously assumed mm == current->mm
and mm->mm_users == 1 implies the mm will remain single-threaded at
least until this thread creates another mm_users reference, has now
broken.

arch/sparc/kernel/smp_64.c:

    if (atomic_read(&mm->mm_users) == 1) {
        cpumask_copy(mm_cpumask(mm), cpumask_of(cpu));
        goto local_flush_and_out;
    }

vs fs/io_uring.c

    if (unlikely(!(ctx->flags & IORING_SETUP_SQPOLL) ||
                 !mmget_not_zero(ctx->sqo_mm)))
        return -EFAULT;
    kthread_use_mm(ctx->sqo_mm);

mmget_not_zero() could come in right after the mm_users == 1 test, then
kthread_use_mm() which sets its CPU in the mm_cpumask. That update could
be lost if cpumask_copy() occurs afterward.

I propose we fix this by allowing mmget_not_zero() to be a first-class
reference, and not have this obscure undocumented and unchecked
restriction.

The basic fix for sparc64 is to remove its mm_cpumask clearing code. The
optimisation could be effectively restored by sending IPIs to mm_cpumask
members and having them remove themselves from mm_cpumask. This is more
tricky so I leave it as an exercise for someone with a sparc64 SMP.
powerpc has a (currently similarly broken) example.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200914045219.3736466-4-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/sparc/kernel/smp_64.c | 65 ++++++++------------------------------
 1 file changed, 14 insertions(+), 51 deletions(-)

diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index a8275fea4b70c..aa81c25b44cf3 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1039,38 +1039,9 @@ void smp_fetch_global_pmu(void)
  * are flush_tlb_*() routines, and these run after flush_cache_*()
  * which performs the flushw.
  *
- * The SMP TLB coherency scheme we use works as follows:
- *
- * 1) mm->cpu_vm_mask is a bit mask of which cpus an address
- *    space has (potentially) executed on, this is the heuristic
- *    we use to avoid doing cross calls.
- *
- *    Also, for flushing from kswapd and also for clones, we
- *    use cpu_vm_mask as the list of cpus to make run the TLB.
- *
- * 2) TLB context numbers are shared globally across all processors
- *    in the system, this allows us to play several games to avoid
- *    cross calls.
- *
- *    One invariant is that when a cpu switches to a process, and
- *    that processes tsk->active_mm->cpu_vm_mask does not have the
- *    current cpu's bit set, that tlb context is flushed locally.
- *
- *    If the address space is non-shared (ie. mm->count == 1) we avoid
- *    cross calls when we want to flush the currently running process's
- *    tlb state.  This is done by clearing all cpu bits except the current
- *    processor's in current->mm->cpu_vm_mask and performing the
- *    flush locally only.  This will force any subsequent cpus which run
- *    this task to flush the context from the local tlb if the process
- *    migrates to another cpu (again).
- *
- * 3) For shared address spaces (threads) and swapping we bite the
- *    bullet for most cases and perform the cross call (but only to
- *    the cpus listed in cpu_vm_mask).
- *
- *    The performance gain from "optimizing" away the cross call for threads is
- *    questionable (in theory the big win for threads is the massive sharing of
- *    address space state across processors).
+ * mm->cpu_vm_mask is a bit mask of which cpus an address
+ * space has (potentially) executed on, this is the heuristic
+ * we use to limit cross calls.
  */
 
 /* This currently is only used by the hugetlb arch pre-fault
@@ -1080,18 +1051,13 @@ void smp_fetch_global_pmu(void)
 void smp_flush_tlb_mm(struct mm_struct *mm)
 {
 	u32 ctx = CTX_HWBITS(mm->context);
-	int cpu = get_cpu();
 
-	if (atomic_read(&mm->mm_users) == 1) {
-		cpumask_copy(mm_cpumask(mm), cpumask_of(cpu));
-		goto local_flush_and_out;
-	}
+	get_cpu();
 
 	smp_cross_call_masked(&xcall_flush_tlb_mm,
 			      ctx, 0, 0,
 			      mm_cpumask(mm));
 
-local_flush_and_out:
 	__flush_tlb_mm(ctx, SECONDARY_CONTEXT);
 
 	put_cpu();
@@ -1114,17 +1080,15 @@ void smp_flush_tlb_pending(struct mm_struct *mm, unsigned long nr, unsigned long
 {
 	u32 ctx = CTX_HWBITS(mm->context);
 	struct tlb_pending_info info;
-	int cpu = get_cpu();
+
+	get_cpu();
 
 	info.ctx = ctx;
 	info.nr = nr;
 	info.vaddrs = vaddrs;
 
-	if (mm == current->mm && atomic_read(&mm->mm_users) == 1)
-		cpumask_copy(mm_cpumask(mm), cpumask_of(cpu));
-	else
-		smp_call_function_many(mm_cpumask(mm), tlb_pending_func,
-				       &info, 1);
+	smp_call_function_many(mm_cpumask(mm), tlb_pending_func,
+			       &info, 1);
 
 	__flush_tlb_pending(ctx, nr, vaddrs);
 
@@ -1134,14 +1098,13 @@ void smp_flush_tlb_pending(struct mm_struct *mm, unsigned long nr, unsigned long
 void smp_flush_tlb_page(struct mm_struct *mm, unsigned long vaddr)
 {
 	unsigned long context = CTX_HWBITS(mm->context);
-	int cpu = get_cpu();
 
-	if (mm == current->mm && atomic_read(&mm->mm_users) == 1)
-		cpumask_copy(mm_cpumask(mm), cpumask_of(cpu));
-	else
-		smp_cross_call_masked(&xcall_flush_tlb_page,
-				      context, vaddr, 0,
-				      mm_cpumask(mm));
+	get_cpu();
+
+	smp_cross_call_masked(&xcall_flush_tlb_page,
+			      context, vaddr, 0,
+			      mm_cpumask(mm));
+
 	__flush_tlb_page(context, vaddr);
 
 	put_cpu();
-- 
2.25.1

[PATCH AUTOSEL 5.4 05/80] f2fs: add trace exit in exception path

[Sasha Levin]

From: Zhang Qilong <zhangqilong3@huawei.com>

[ Upstream commit 9b66482282888d02832b7d90239e1cdb18e4b431 ]

Missing the trace exit in f2fs_sync_dirty_inodes

Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/checkpoint.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/fs/f2fs/checkpoint.c b/fs/f2fs/checkpoint.c
index bbd07fe8a4921..3d7f9e20a54bd 100644
--- a/fs/f2fs/checkpoint.c
+++ b/fs/f2fs/checkpoint.c
@@ -1044,8 +1044,12 @@ int f2fs_sync_dirty_inodes(struct f2fs_sb_info *sbi, enum inode_type type)
 				get_pages(sbi, is_dir ?
 				F2FS_DIRTY_DENTS : F2FS_DIRTY_DATA));
 retry:
-	if (unlikely(f2fs_cp_error(sbi)))
+	if (unlikely(f2fs_cp_error(sbi))) {
+		trace_f2fs_sync_dirty_inodes_exit(sbi->sb, is_dir,
+				get_pages(sbi, is_dir ?
+				F2FS_DIRTY_DENTS : F2FS_DIRTY_DATA));
 		return -EIO;
+	}
 
 	spin_lock(&sbi->inode_lock[type]);
 
-- 
2.25.1

[PATCH AUTOSEL 5.4 06/80] f2fs: fix uninit-value in f2fs_lookup

[Sasha Levin]

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit 6d7ab88a98c1b7a47c228f8ffb4f44d631eaf284 ]

As syzbot reported:

Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x21c/0x280 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:122
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:219
 f2fs_lookup+0xe05/0x1a80 fs/f2fs/namei.c:503
 lookup_open fs/namei.c:3082 [inline]
 open_last_lookups fs/namei.c:3177 [inline]
 path_openat+0x2729/0x6a90 fs/namei.c:3365
 do_filp_open+0x2b8/0x710 fs/namei.c:3395
 do_sys_openat2+0xa88/0x1140 fs/open.c:1168
 do_sys_open fs/open.c:1184 [inline]
 __do_compat_sys_openat fs/open.c:1242 [inline]
 __se_compat_sys_openat+0x2a4/0x310 fs/open.c:1240
 __ia32_compat_sys_openat+0x56/0x70 fs/open.c:1240
 do_syscall_32_irqs_on arch/x86/entry/common.c:80 [inline]
 __do_fast_syscall_32+0x129/0x180 arch/x86/entry/common.c:139
 do_fast_syscall_32+0x6a/0xc0 arch/x86/entry/common.c:162
 do_SYSENTER_32+0x73/0x90 arch/x86/entry/common.c:205
 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c

In f2fs_lookup(), @res_page could be used before being initialized,
because in __f2fs_find_entry(), once F2FS_I(dir)->i_current_depth was
been fuzzed to zero, then @res_page will never be initialized, causing
this kmsan warning, relocating @res_page initialization place to fix
this bug.

Reported-by: syzbot+0eac6f0bbd558fd866d7@syzkaller.appspotmail.com
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/dir.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/fs/f2fs/dir.c b/fs/f2fs/dir.c
index e9af46dc06f72..78d041f9775a4 100644
--- a/fs/f2fs/dir.c
+++ b/fs/f2fs/dir.c
@@ -303,16 +303,15 @@ struct f2fs_dir_entry *__f2fs_find_entry(struct inode *dir,
 	unsigned int max_depth;
 	unsigned int level;
 
+	*res_page = NULL;
+
 	if (f2fs_has_inline_dentry(dir)) {
-		*res_page = NULL;
 		de = f2fs_find_in_inline_dir(dir, fname, res_page);
 		goto out;
 	}
 
-	if (npages == 0) {
-		*res_page = NULL;
+	if (npages == 0)
 		goto out;
-	}
 
 	max_depth = F2FS_I(dir)->i_current_depth;
 	if (unlikely(max_depth > MAX_DIR_HASH_DEPTH)) {
@@ -323,7 +322,6 @@ struct f2fs_dir_entry *__f2fs_find_entry(struct inode *dir,
 	}
 
 	for (level = 0; level < max_depth; level++) {
-		*res_page = NULL;
 		de = find_in_level(dir, level, fname, res_page);
 		if (de || IS_ERR(*res_page))
 			break;
-- 
2.25.1

[PATCH AUTOSEL 5.4 07/80] f2fs: fix to check segment boundary during SIT page readahead

[Sasha Levin]

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit 6a257471fa42c8c9c04a875cd3a2a22db148e0f0 ]

As syzbot reported:

kernel BUG at fs/f2fs/segment.h:657!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 16220 Comm: syz-executor.0 Not tainted 5.9.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:f2fs_ra_meta_pages+0xa51/0xdc0 fs/f2fs/segment.h:657
Call Trace:
 build_sit_entries fs/f2fs/segment.c:4195 [inline]
 f2fs_build_segment_manager+0x4b8a/0xa3c0 fs/f2fs/segment.c:4779
 f2fs_fill_super+0x377d/0x6b80 fs/f2fs/super.c:3633
 mount_bdev+0x32e/0x3f0 fs/super.c:1417
 legacy_get_tree+0x105/0x220 fs/fs_context.c:592
 vfs_get_tree+0x89/0x2f0 fs/super.c:1547
 do_new_mount fs/namespace.c:2875 [inline]
 path_mount+0x1387/0x2070 fs/namespace.c:3192
 do_mount fs/namespace.c:3205 [inline]
 __do_sys_mount fs/namespace.c:3413 [inline]
 __se_sys_mount fs/namespace.c:3390 [inline]
 __x64_sys_mount+0x27f/0x300 fs/namespace.c:3390
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

@blkno in f2fs_ra_meta_pages could exceed max segment count, causing panic
in following sanity check in current_sit_addr(), add check condition to
avoid this issue.

Reported-by: syzbot+3698081bcf0bb2d12174@syzkaller.appspotmail.com
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/checkpoint.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/f2fs/checkpoint.c b/fs/f2fs/checkpoint.c
index 3d7f9e20a54bd..6d9be7783d25c 100644
--- a/fs/f2fs/checkpoint.c
+++ b/fs/f2fs/checkpoint.c
@@ -243,6 +243,8 @@ int f2fs_ra_meta_pages(struct f2fs_sb_info *sbi, block_t start, int nrpages,
 					blkno * NAT_ENTRY_PER_BLOCK);
 			break;
 		case META_SIT:
+			if (unlikely(blkno >= TOTAL_SEGS(sbi)))
+				goto out;
 			/* get sit block addr */
 			fio.new_blkaddr = current_sit_addr(sbi,
 					blkno * SIT_ENTRY_PER_BLOCK);
-- 
2.25.1

[PATCH AUTOSEL 5.4 08/80] s390/startup: avoid save_area_sync overflow

[Sasha Levin]

From: Vasily Gorbik <gor@linux.ibm.com>

[ Upstream commit 2835c2ea95d50625108e47a459e1a47f6be836ce ]

Currently we overflow save_area_sync and write over
save_area_async. Although this is not a real problem make
startup_pgm_check_handler consistent with late pgm check handler and
store [%r0,%r7] directly into gpregs_save_area.

Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/boot/head.S | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/arch/s390/boot/head.S b/arch/s390/boot/head.S
index 4b86a8d3c1219..e6bf5f40bff34 100644
--- a/arch/s390/boot/head.S
+++ b/arch/s390/boot/head.S
@@ -360,22 +360,23 @@ ENTRY(startup_kdump)
 # the save area and does disabled wait with a faulty address.
 #
 ENTRY(startup_pgm_check_handler)
-	stmg	%r0,%r15,__LC_SAVE_AREA_SYNC
-	la	%r1,4095
-	stctg	%c0,%c15,__LC_CREGS_SAVE_AREA-4095(%r1)
-	mvc	__LC_GPREGS_SAVE_AREA-4095(128,%r1),__LC_SAVE_AREA_SYNC
-	mvc	__LC_PSW_SAVE_AREA-4095(16,%r1),__LC_PGM_OLD_PSW
+	stmg	%r8,%r15,__LC_SAVE_AREA_SYNC
+	la	%r8,4095
+	stctg	%c0,%c15,__LC_CREGS_SAVE_AREA-4095(%r8)
+	stmg	%r0,%r7,__LC_GPREGS_SAVE_AREA-4095(%r8)
+	mvc	__LC_GPREGS_SAVE_AREA-4095+64(64,%r8),__LC_SAVE_AREA_SYNC
+	mvc	__LC_PSW_SAVE_AREA-4095(16,%r8),__LC_PGM_OLD_PSW
 	mvc	__LC_RETURN_PSW(16),__LC_PGM_OLD_PSW
 	ni	__LC_RETURN_PSW,0xfc	# remove IO and EX bits
 	ni	__LC_RETURN_PSW+1,0xfb	# remove MCHK bit
 	oi	__LC_RETURN_PSW+1,0x2	# set wait state bit
-	larl	%r2,.Lold_psw_disabled_wait
-	stg	%r2,__LC_PGM_NEW_PSW+8
-	l	%r15,.Ldump_info_stack-.Lold_psw_disabled_wait(%r2)
+	larl	%r9,.Lold_psw_disabled_wait
+	stg	%r9,__LC_PGM_NEW_PSW+8
+	l	%r15,.Ldump_info_stack-.Lold_psw_disabled_wait(%r9)
 	brasl	%r14,print_pgm_check_info
 .Lold_psw_disabled_wait:
-	la	%r1,4095
-	lmg	%r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)
+	la	%r8,4095
+	lmg	%r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r8)
 	lpswe	__LC_RETURN_PSW		# disabled wait
 .Ldump_info_stack:
 	.long	0x5000 + PAGE_SIZE - STACK_FRAME_OVERHEAD
-- 
2.25.1

[PATCH AUTOSEL 5.4 09/80] um: change sigio_spinlock to a mutex

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit f2d05059e15af3f70502074f4e3a504530af504a ]

Lockdep complains at boot:

=============================
[ BUG: Invalid wait context ]
5.7.0-05093-g46d91ecd597b #98 Not tainted
-----------------------------
swapper/1 is trying to lock:
0000000060931b98 (&desc[i].request_mutex){+.+.}-{3:3}, at: __setup_irq+0x11d/0x623
other info that might help us debug this:
context-{4:4}
1 lock held by swapper/1:
 #0: 000000006074fed8 (sigio_spinlock){+.+.}-{2:2}, at: sigio_lock+0x1a/0x1c
stack backtrace:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.7.0-05093-g46d91ecd597b #98
Stack:
 7fa4fab0 6028dfd1 0000002a 6008bea5
 7fa50700 7fa50040 7fa4fac0 6028e016
 7fa4fb50 6007f6da 60959c18 00000000
Call Trace:
 [<60023a0e>] show_stack+0x13b/0x155
 [<6028e016>] dump_stack+0x2a/0x2c
 [<6007f6da>] __lock_acquire+0x515/0x15f2
 [<6007eb50>] lock_acquire+0x245/0x273
 [<6050d9f1>] __mutex_lock+0xbd/0x325
 [<6050dc76>] mutex_lock_nested+0x1d/0x1f
 [<6008e27e>] __setup_irq+0x11d/0x623
 [<6008e8ed>] request_threaded_irq+0x169/0x1a6
 [<60021eb0>] um_request_irq+0x1ee/0x24b
 [<600234ee>] write_sigio_irq+0x3b/0x76
 [<600383ca>] sigio_broken+0x146/0x2e4
 [<60020bd8>] do_one_initcall+0xde/0x281

Because we hold sigio_spinlock and then get into requesting
an interrupt with a mutex.

Change the spinlock to a mutex to avoid that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/um/kernel/sigio.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/um/kernel/sigio.c b/arch/um/kernel/sigio.c
index 10c99e058fcae..d1cffc2a7f212 100644
--- a/arch/um/kernel/sigio.c
+++ b/arch/um/kernel/sigio.c
@@ -35,14 +35,14 @@ int write_sigio_irq(int fd)
 }
 
 /* These are called from os-Linux/sigio.c to protect its pollfds arrays. */
-static DEFINE_SPINLOCK(sigio_spinlock);
+static DEFINE_MUTEX(sigio_mutex);
 
 void sigio_lock(void)
 {
-	spin_lock(&sigio_spinlock);
+	mutex_lock(&sigio_mutex);
 }
 
 void sigio_unlock(void)
 {
-	spin_unlock(&sigio_spinlock);
+	mutex_unlock(&sigio_mutex);
 }
-- 
2.25.1

[PATCH AUTOSEL 5.4 10/80] f2fs: handle errors of f2fs_get_meta_page_nofail

[Sasha Levin]

From: Jaegeuk Kim <jaegeuk@kernel.org>

[ Upstream commit 86f33603f8c51537265ff7ac0320638fd2cbdb1b ]

First problem is we hit BUG_ON() in f2fs_get_sum_page given EIO on
f2fs_get_meta_page_nofail().

Quick fix was not to give any error with infinite loop, but syzbot caught
a case where it goes to that loop from fuzzed image. In turned out we abused
f2fs_get_meta_page_nofail() like in the below call stack.

- f2fs_fill_super
 - f2fs_build_segment_manager
  - build_sit_entries
   - get_current_sit_page

INFO: task syz-executor178:6870 can't die for more than 143 seconds.
task:syz-executor178 state:R
 stack:26960 pid: 6870 ppid:  6869 flags:0x00004006
Call Trace:

Showing all locks held in the system:
1 lock held by khungtaskd/1179:
 #0: ffffffff8a554da0 (rcu_read_lock){....}-{1:2}, at: debug_show_all_locks+0x53/0x260 kernel/locking/lockdep.c:6242
1 lock held by systemd-journal/3920:
1 lock held by in:imklog/6769:
 #0: ffff88809eebc130 (&f->f_pos_lock){+.+.}-{3:3}, at: __fdget_pos+0xe9/0x100 fs/file.c:930
1 lock held by syz-executor178/6870:
 #0: ffff8880925120e0 (&type->s_umount_key#47/1){+.+.}-{3:3}, at: alloc_super+0x201/0xaf0 fs/super.c:229

Actually, we didn't have to use _nofail in this case, since we could return
error to mount(2) already with the error handler.

As a result, this patch tries to 1) remove _nofail callers as much as possible,
2) deal with error case in last remaining caller, f2fs_get_sum_page().

Reported-by: syzbot+ee250ac8137be41d7b13@syzkaller.appspotmail.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/checkpoint.c |  2 +-
 fs/f2fs/f2fs.h       |  2 +-
 fs/f2fs/node.c       |  2 +-
 fs/f2fs/segment.c    | 12 +++++++++---
 4 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/fs/f2fs/checkpoint.c b/fs/f2fs/checkpoint.c
index 6d9be7783d25c..c966ccc44c157 100644
--- a/fs/f2fs/checkpoint.c
+++ b/fs/f2fs/checkpoint.c
@@ -108,7 +108,7 @@ struct page *f2fs_get_meta_page(struct f2fs_sb_info *sbi, pgoff_t index)
 	return __get_meta_page(sbi, index, true);
 }
 
-struct page *f2fs_get_meta_page_nofail(struct f2fs_sb_info *sbi, pgoff_t index)
+struct page *f2fs_get_meta_page_retry(struct f2fs_sb_info *sbi, pgoff_t index)
 {
 	struct page *page;
 	int count = 0;
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index b3b7e63394be7..63440abe58c42 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -3149,7 +3149,7 @@ enum rw_hint f2fs_io_type_to_rw_hint(struct f2fs_sb_info *sbi,
 void f2fs_stop_checkpoint(struct f2fs_sb_info *sbi, bool end_io);
 struct page *f2fs_grab_meta_page(struct f2fs_sb_info *sbi, pgoff_t index);
 struct page *f2fs_get_meta_page(struct f2fs_sb_info *sbi, pgoff_t index);
-struct page *f2fs_get_meta_page_nofail(struct f2fs_sb_info *sbi, pgoff_t index);
+struct page *f2fs_get_meta_page_retry(struct f2fs_sb_info *sbi, pgoff_t index);
 struct page *f2fs_get_tmp_page(struct f2fs_sb_info *sbi, pgoff_t index);
 bool f2fs_is_valid_blkaddr(struct f2fs_sb_info *sbi,
 					block_t blkaddr, int type);
diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c
index ed12e96681842..2a4a382f28fed 100644
--- a/fs/f2fs/node.c
+++ b/fs/f2fs/node.c
@@ -109,7 +109,7 @@ static void clear_node_page_dirty(struct page *page)
 
 static struct page *get_current_nat_page(struct f2fs_sb_info *sbi, nid_t nid)
 {
-	return f2fs_get_meta_page_nofail(sbi, current_nat_addr(sbi, nid));
+	return f2fs_get_meta_page(sbi, current_nat_addr(sbi, nid));
 }
 
 static struct page *get_next_nat_page(struct f2fs_sb_info *sbi, nid_t nid)
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index 7d85784012678..5ba677f85533c 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -2310,7 +2310,9 @@ int f2fs_npages_for_summary_flush(struct f2fs_sb_info *sbi, bool for_ra)
  */
 struct page *f2fs_get_sum_page(struct f2fs_sb_info *sbi, unsigned int segno)
 {
-	return f2fs_get_meta_page_nofail(sbi, GET_SUM_BLOCK(sbi, segno));
+	if (unlikely(f2fs_cp_error(sbi)))
+		return ERR_PTR(-EIO);
+	return f2fs_get_meta_page_retry(sbi, GET_SUM_BLOCK(sbi, segno));
 }
 
 void f2fs_update_meta_page(struct f2fs_sb_info *sbi,
@@ -2582,7 +2584,11 @@ static void change_curseg(struct f2fs_sb_info *sbi, int type)
 	__next_free_blkoff(sbi, curseg, 0);
 
 	sum_page = f2fs_get_sum_page(sbi, new_segno);
-	f2fs_bug_on(sbi, IS_ERR(sum_page));
+	if (IS_ERR(sum_page)) {
+		/* GC won't be able to use stale summary pages by cp_error */
+		memset(curseg->sum_blk, 0, SUM_ENTRY_SIZE);
+		return;
+	}
 	sum_node = (struct f2fs_summary_block *)page_address(sum_page);
 	memcpy(curseg->sum_blk, sum_node, SUM_ENTRY_SIZE);
 	f2fs_put_page(sum_page, 1);
@@ -3713,7 +3719,7 @@ int f2fs_lookup_journal_in_cursum(struct f2fs_journal *journal, int type,
 static struct page *get_current_sit_page(struct f2fs_sb_info *sbi,
 					unsigned int segno)
 {
-	return f2fs_get_meta_page_nofail(sbi, current_sit_addr(sbi, segno));
+	return f2fs_get_meta_page(sbi, current_sit_addr(sbi, segno));
 }
 
 static struct page *get_next_sit_page(struct f2fs_sb_info *sbi,
-- 
2.25.1

[PATCH AUTOSEL 5.4 11/80] MIPS: ftrace: Remove redundant #ifdef CONFIG_DYNAMIC_FTRACE

[Sasha Levin]

From: Zejiang Tang <tangzejiang@loongson.cn>

[ Upstream commit 39116103a7345927fa99644d08bc0cc9d45fea6f ]

There exists redundant #ifdef CONFIG_DYNAMIC_FTRACE in ftrace.c, remove it.

Signed-off-by: Zejiang Tang <tangzejiang@loongson.cn>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/kernel/ftrace.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c
index 2625232bfe526..f57e68f40a348 100644
--- a/arch/mips/kernel/ftrace.c
+++ b/arch/mips/kernel/ftrace.c
@@ -37,10 +37,6 @@ void arch_ftrace_update_code(int command)
 	ftrace_modify_all_code(command);
 }
 
-#endif
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-
 #define JAL 0x0c000000		/* jump & link: ip --> ra, jump to target */
 #define ADDR_MASK 0x03ffffff	/*  op_code|addr : 31...26|25 ....0 */
 #define JUMP_RANGE_MASK ((1UL << 28) - 1)
-- 
2.25.1

[PATCH AUTOSEL 5.4 12/80] ARM: 8997/2: hw_breakpoint: Handle inexact watchpoint addresses

[Sasha Levin]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 22c9e58299e5f18274788ce54c03d4fb761e3c5d ]

This is commit fdfeff0f9e3d ("arm64: hw_breakpoint: Handle inexact
watchpoint addresses") but ported to arm32, which has the same
problem.

This problem was found by Android CTS tests, notably the
"watchpoint_imprecise" test [1].  I tested locally against a copycat
(simplified) version of the test though.

[1] https://android.googlesource.com/platform/bionic/+/master/tests/sys_ptrace_test.cpp

Link: https://lkml.kernel.org/r/20191019111216.1.I82eae759ca6dc28a245b043f485ca490e3015321@changeid

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/kernel/hw_breakpoint.c | 100 +++++++++++++++++++++++---------
 1 file changed, 72 insertions(+), 28 deletions(-)

diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 5f95e4b911a0b..7021ef0b4e71b 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -680,6 +680,40 @@ static void disable_single_step(struct perf_event *bp)
 	arch_install_hw_breakpoint(bp);
 }
 
+/*
+ * Arm32 hardware does not always report a watchpoint hit address that matches
+ * one of the watchpoints set. It can also report an address "near" the
+ * watchpoint if a single instruction access both watched and unwatched
+ * addresses. There is no straight-forward way, short of disassembling the
+ * offending instruction, to map that address back to the watchpoint. This
+ * function computes the distance of the memory access from the watchpoint as a
+ * heuristic for the likelyhood that a given access triggered the watchpoint.
+ *
+ * See this same function in the arm64 platform code, which has the same
+ * problem.
+ *
+ * The function returns the distance of the address from the bytes watched by
+ * the watchpoint. In case of an exact match, it returns 0.
+ */
+static u32 get_distance_from_watchpoint(unsigned long addr, u32 val,
+					struct arch_hw_breakpoint_ctrl *ctrl)
+{
+	u32 wp_low, wp_high;
+	u32 lens, lene;
+
+	lens = __ffs(ctrl->len);
+	lene = __fls(ctrl->len);
+
+	wp_low = val + lens;
+	wp_high = val + lene;
+	if (addr < wp_low)
+		return wp_low - addr;
+	else if (addr > wp_high)
+		return addr - wp_high;
+	else
+		return 0;
+}
+
 static int watchpoint_fault_on_uaccess(struct pt_regs *regs,
 				       struct arch_hw_breakpoint *info)
 {
@@ -689,23 +723,25 @@ static int watchpoint_fault_on_uaccess(struct pt_regs *regs,
 static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 			       struct pt_regs *regs)
 {
-	int i, access;
-	u32 val, ctrl_reg, alignment_mask;
+	int i, access, closest_match = 0;
+	u32 min_dist = -1, dist;
+	u32 val, ctrl_reg;
 	struct perf_event *wp, **slots;
 	struct arch_hw_breakpoint *info;
 	struct arch_hw_breakpoint_ctrl ctrl;
 
 	slots = this_cpu_ptr(wp_on_reg);
 
+	/*
+	 * Find all watchpoints that match the reported address. If no exact
+	 * match is found. Attribute the hit to the closest watchpoint.
+	 */
+	rcu_read_lock();
 	for (i = 0; i < core_num_wrps; ++i) {
-		rcu_read_lock();
-
 		wp = slots[i];
-
 		if (wp == NULL)
-			goto unlock;
+			continue;
 
-		info = counter_arch_bp(wp);
 		/*
 		 * The DFAR is an unknown value on debug architectures prior
 		 * to 7.1. Since we only allow a single watchpoint on these
@@ -714,33 +750,31 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 		 */
 		if (debug_arch < ARM_DEBUG_ARCH_V7_1) {
 			BUG_ON(i > 0);
+			info = counter_arch_bp(wp);
 			info->trigger = wp->attr.bp_addr;
 		} else {
-			if (info->ctrl.len == ARM_BREAKPOINT_LEN_8)
-				alignment_mask = 0x7;
-			else
-				alignment_mask = 0x3;
-
-			/* Check if the watchpoint value matches. */
-			val = read_wb_reg(ARM_BASE_WVR + i);
-			if (val != (addr & ~alignment_mask))
-				goto unlock;
-
-			/* Possible match, check the byte address select. */
-			ctrl_reg = read_wb_reg(ARM_BASE_WCR + i);
-			decode_ctrl_reg(ctrl_reg, &ctrl);
-			if (!((1 << (addr & alignment_mask)) & ctrl.len))
-				goto unlock;
-
 			/* Check that the access type matches. */
 			if (debug_exception_updates_fsr()) {
 				access = (fsr & ARM_FSR_ACCESS_MASK) ?
 					  HW_BREAKPOINT_W : HW_BREAKPOINT_R;
 				if (!(access & hw_breakpoint_type(wp)))
-					goto unlock;
+					continue;
 			}
 
+			val = read_wb_reg(ARM_BASE_WVR + i);
+			ctrl_reg = read_wb_reg(ARM_BASE_WCR + i);
+			decode_ctrl_reg(ctrl_reg, &ctrl);
+			dist = get_distance_from_watchpoint(addr, val, &ctrl);
+			if (dist < min_dist) {
+				min_dist = dist;
+				closest_match = i;
+			}
+			/* Is this an exact match? */
+			if (dist != 0)
+				continue;
+
 			/* We have a winner. */
+			info = counter_arch_bp(wp);
 			info->trigger = addr;
 		}
 
@@ -762,13 +796,23 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 		 * we can single-step over the watchpoint trigger.
 		 */
 		if (!is_default_overflow_handler(wp))
-			goto unlock;
-
+			continue;
 step:
 		enable_single_step(wp, instruction_pointer(regs));
-unlock:
-		rcu_read_unlock();
 	}
+
+	if (min_dist > 0 && min_dist != -1) {
+		/* No exact match found. */
+		wp = slots[closest_match];
+		info = counter_arch_bp(wp);
+		info->trigger = addr;
+		pr_debug("watchpoint fired: address = 0x%x\n", info->trigger);
+		perf_bp_event(wp, regs);
+		if (is_default_overflow_handler(wp))
+			enable_single_step(wp, instruction_pointer(regs));
+	}
+
+	rcu_read_unlock();
 }
 
 static void watchpoint_single_step_handler(unsigned long pc)
-- 
2.25.1

[PATCH AUTOSEL 5.4 13/80] NFS4: Fix oops when copy_file_range is attempted with NFS4.0 source

[Sasha Levin]

From: Dave Wysochanski <dwysocha@redhat.com>

[ Upstream commit d8a6ad913c286d4763ae20b14c02fe6f39d7cd9f ]

The following oops is seen during xfstest/565 when the 'test'
(source of the copy) is NFS4.0 and 'scratch' (destination) is NFS4.2
[   59.692458] run fstests generic/565 at 2020-08-01 05:50:35
[   60.613588] BUG: kernel NULL pointer dereference, address: 0000000000000008
[   60.624970] #PF: supervisor read access in kernel mode
[   60.627671] #PF: error_code(0x0000) - not-present page
[   60.630347] PGD 0 P4D 0
[   60.631853] Oops: 0000 [#1] SMP PTI
[   60.634086] CPU: 6 PID: 2828 Comm: xfs_io Kdump: loaded Not tainted 5.8.0-rc3 #1
[   60.637676] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[   60.639901] RIP: 0010:nfs4_check_serverowner_major_id+0x5/0x30 [nfsv4]
[   60.642719] Code: 89 ff e8 3e b3 b8 e1 e9 71 fe ff ff 41 bc da d8 ff ff e9 c3 fe ff ff e8 e9 9d 08 e2 66 0f 1f 84 00 00 00 00 00 66 66 66 66 90 <8b> 57 08 31 c0 3b 56 08 75 12 48 83 c6 0c 48 83 c7 0c e8 c4 97 bb
[   60.652629] RSP: 0018:ffffc265417f7e10 EFLAGS: 00010287
[   60.655379] RAX: ffffa0664b066400 RBX: 0000000000000000 RCX: 0000000000000001
[   60.658754] RDX: ffffa066725fb000 RSI: ffffa066725fd000 RDI: 0000000000000000
[   60.662292] RBP: 0000000000020000 R08: 0000000000020000 R09: 0000000000000000
[   60.666189] R10: 0000000000000003 R11: 0000000000000000 R12: ffffa06648258d00
[   60.669914] R13: 0000000000000000 R14: 0000000000000000 R15: ffffa06648258100
[   60.673645] FS:  00007faa9fb35800(0000) GS:ffffa06677d80000(0000) knlGS:0000000000000000
[   60.677698] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   60.680773] CR2: 0000000000000008 CR3: 0000000203f14000 CR4: 00000000000406e0
[   60.684476] Call Trace:
[   60.685809]  nfs4_copy_file_range+0xfc/0x230 [nfsv4]
[   60.688704]  vfs_copy_file_range+0x2ee/0x310
[   60.691104]  __x64_sys_copy_file_range+0xd6/0x210
[   60.693527]  do_syscall_64+0x4d/0x90
[   60.695512]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   60.698006] RIP: 0033:0x7faa9febc1bd

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4file.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/nfs4file.c b/fs/nfs/nfs4file.c
index 534b6fd70ffdb..6b31cb5f9c9db 100644
--- a/fs/nfs/nfs4file.c
+++ b/fs/nfs/nfs4file.c
@@ -138,7 +138,8 @@ static ssize_t __nfs4_copy_file_range(struct file *file_in, loff_t pos_in,
 	/* Only offload copy if superblock is the same */
 	if (file_inode(file_in)->i_sb != file_inode(file_out)->i_sb)
 		return -EXDEV;
-	if (!nfs_server_capable(file_inode(file_out), NFS_CAP_COPY))
+	if (!nfs_server_capable(file_inode(file_out), NFS_CAP_COPY) ||
+	    !nfs_server_capable(file_inode(file_in), NFS_CAP_COPY))
 		return -EOPNOTSUPP;
 	if (file_inode(file_in) == file_inode(file_out))
 		return -EOPNOTSUPP;
-- 
2.25.1

[PATCH AUTOSEL 5.4 14/80] power: supply: bq27xxx: report "not charging" on all types

[Sasha Levin]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit 7bf738ba110722b63e9dc8af760d3fb2aef25593 ]

Commit 6f24ff97e323 ("power: supply: bq27xxx_battery: Add the
BQ27Z561 Battery monitor") and commit d74534c27775 ("power:
bq27xxx_battery: Add support for additional bq27xxx family devices")
added support for new device types by copying most of the code and
adding necessary quirks.

However they did not copy the code in bq27xxx_battery_status()
responsible for returning POWER_SUPPLY_STATUS_NOT_CHARGING.

Unify the bq27xxx_battery_status() so for all types when charger is
supplied, it will return "not charging" status.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/bq27xxx_battery.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
index 664e50103eaaf..aff0a0a5e7f8c 100644
--- a/drivers/power/supply/bq27xxx_battery.c
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -1678,8 +1678,6 @@ static int bq27xxx_battery_status(struct bq27xxx_device_info *di,
 			status = POWER_SUPPLY_STATUS_FULL;
 		else if (di->cache.flags & BQ27000_FLAG_CHGS)
 			status = POWER_SUPPLY_STATUS_CHARGING;
-		else if (power_supply_am_i_supplied(di->bat) > 0)
-			status = POWER_SUPPLY_STATUS_NOT_CHARGING;
 		else
 			status = POWER_SUPPLY_STATUS_DISCHARGING;
 	} else {
@@ -1691,6 +1689,10 @@ static int bq27xxx_battery_status(struct bq27xxx_device_info *di,
 			status = POWER_SUPPLY_STATUS_CHARGING;
 	}
 
+	if ((status == POWER_SUPPLY_STATUS_DISCHARGING) &&
+	    (power_supply_am_i_supplied(di->bat) > 0))
+		status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+
 	val->intval = status;
 
 	return 0;
-- 
2.25.1

[PATCH AUTOSEL 5.4 15/80] xfs: fix realtime bitmap/summary file truncation when growing rt volume

[Sasha Levin]

From: "Darrick J. Wong" <darrick.wong@oracle.com>

[ Upstream commit f4c32e87de7d66074d5612567c5eac7325024428 ]

The realtime bitmap and summary files are regular files that are hidden
away from the directory tree.  Since they're regular files, inode
inactivation will try to purge what it thinks are speculative
preallocations beyond the incore size of the file.  Unfortunately,
xfs_growfs_rt forgets to update the incore size when it resizes the
inodes, with the result that inactivating the rt inodes at unmount time
will cause their contents to be truncated.

Fix this by updating the incore size when we change the ondisk size as
part of updating the superblock.  Note that we don't do this when we're
allocating blocks to the rt inodes because we actually want those blocks
to get purged if the growfs fails.

This fixes corruption complaints from the online rtsummary checker when
running xfs/233.  Since that test requires rmap, one can also trigger
this by growing an rt volume, cycling the mount, and creating rt files.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/xfs_rtalloc.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c
index 4a48a8c75b4f7..23ada3b3ea96c 100644
--- a/fs/xfs/xfs_rtalloc.c
+++ b/fs/xfs/xfs_rtalloc.c
@@ -1010,10 +1010,13 @@ xfs_growfs_rt(
 		xfs_ilock(mp->m_rbmip, XFS_ILOCK_EXCL);
 		xfs_trans_ijoin(tp, mp->m_rbmip, XFS_ILOCK_EXCL);
 		/*
-		 * Update the bitmap inode's size.
+		 * Update the bitmap inode's size ondisk and incore.  We need
+		 * to update the incore size so that inode inactivation won't
+		 * punch what it thinks are "posteof" blocks.
 		 */
 		mp->m_rbmip->i_d.di_size =
 			nsbp->sb_rbmblocks * nsbp->sb_blocksize;
+		i_size_write(VFS_I(mp->m_rbmip), mp->m_rbmip->i_d.di_size);
 		xfs_trans_log_inode(tp, mp->m_rbmip, XFS_ILOG_CORE);
 		/*
 		 * Get the summary inode into the transaction.
@@ -1021,9 +1024,12 @@ xfs_growfs_rt(
 		xfs_ilock(mp->m_rsumip, XFS_ILOCK_EXCL);
 		xfs_trans_ijoin(tp, mp->m_rsumip, XFS_ILOCK_EXCL);
 		/*
-		 * Update the summary inode's size.
+		 * Update the summary inode's size.  We need to update the
+		 * incore size so that inode inactivation won't punch what it
+		 * thinks are "posteof" blocks.
 		 */
 		mp->m_rsumip->i_d.di_size = nmp->m_rsumsize;
+		i_size_write(VFS_I(mp->m_rsumip), mp->m_rsumip->i_d.di_size);
 		xfs_trans_log_inode(tp, mp->m_rsumip, XFS_ILOG_CORE);
 		/*
 		 * Copy summary data from old to new sizes.
-- 
2.25.1

[PATCH AUTOSEL 5.4 16/80] video: fbdev: pvr2fb: initialize variables

[Sasha Levin]

From: Tom Rix <trix@redhat.com>

[ Upstream commit 8e1ba47c60bcd325fdd097cd76054639155e5d2e ]

clang static analysis reports this repesentative error

pvr2fb.c:1049:2: warning: 1st function call argument
  is an uninitialized value [core.CallAndMessage]
        if (*cable_arg)
        ^~~~~~~~~~~~~~~

Problem is that cable_arg depends on the input loop to
set the cable_arg[0].  If it does not, then some random
value from the stack is used.

A similar problem exists for output_arg.

So initialize cable_arg and output_arg.

Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720191845.20115-1-trix@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/pvr2fb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/video/fbdev/pvr2fb.c b/drivers/video/fbdev/pvr2fb.c
index 0a3b2b7c78912..c916e91614436 100644
--- a/drivers/video/fbdev/pvr2fb.c
+++ b/drivers/video/fbdev/pvr2fb.c
@@ -1016,6 +1016,8 @@ static int __init pvr2fb_setup(char *options)
 	if (!options || !*options)
 		return 0;
 
+	cable_arg[0] = output_arg[0] = 0;
+
 	while ((this_opt = strsep(&options, ","))) {
 		if (!*this_opt)
 			continue;
-- 
2.25.1

[PATCH AUTOSEL 5.4 17/80] ath10k: start recovery process when payload length exceeds max htc length for sdio

[Sasha Levin]

From: Wen Gong <wgong@codeaurora.org>

[ Upstream commit 2fd3c8f34d08af0a6236085f9961866ad92ef9ec ]

When simulate random transfer fail for sdio write and read, it happened
"payload length exceeds max htc length" and recovery later sometimes.

Test steps:
1. Add config and update kernel:
CONFIG_FAIL_MMC_REQUEST=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y

2. Run simulate fail:
cd /sys/kernel/debug/mmc1/fail_mmc_request
echo 10 > probability
echo 10 > times # repeat until hitting issues

3. It happened payload length exceeds max htc length.
[  199.935506] ath10k_sdio mmc1:0001:1: payload length 57005 exceeds max htc length: 4088
....
[  264.990191] ath10k_sdio mmc1:0001:1: payload length 57005 exceeds max htc length: 4088

4. after some time, such as 60 seconds, it start recovery which triggered
by wmi command timeout for periodic scan.
[  269.229232] ieee80211 phy0: Hardware restart was requested
[  269.734693] ath10k_sdio mmc1:0001:1: device successfully recovered

The simulate fail of sdio is not a real sdio transter fail, it only
set an error status in mmc_should_fail_request after the transfer end,
actually the transfer is success, then sdio_io_rw_ext_helper will
return error status and stop transfer the left data. For example,
the really RX len is 286 bytes, then it will split to 2 blocks in
sdio_io_rw_ext_helper, one is 256 bytes, left is 30 bytes, if the
first 256 bytes get an error status by mmc_should_fail_request,then
the left 30 bytes will not read in this RX operation. Then when the
next RX arrive, the left 30 bytes will be considered as the header
of the read, the top 4 bytes of the 30 bytes will be considered as
lookaheads, but actually the 4 bytes is not the lookaheads, so the len
from this lookaheads is not correct, it exceeds max htc length 4088
sometimes. When happened exceeds, the buffer chain is not matched between
firmware and ath10k, then it need to start recovery ASAP. Recently then
recovery will be started by wmi command timeout, but it will be long time
later, for example, it is 60+ seconds later from the periodic scan, if
it does not have periodic scan, it will be longer.

Start recovery when it happened "payload length exceeds max htc length"
will be reasonable.

This patch only effect sdio chips.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.

Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200108031957.22308-3-wgong@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/sdio.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index 8fe626deadeb0..24b1927a07518 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -550,6 +550,10 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
 				    le16_to_cpu(htc_hdr->len),
 				    ATH10K_HTC_MBOX_MAX_PAYLOAD_LENGTH);
 			ret = -ENOMEM;
+
+			queue_work(ar->workqueue, &ar->restart_work);
+			ath10k_warn(ar, "exceeds length, start recovery\n");
+
 			goto err;
 		}
 
-- 
2.25.1

[PATCH AUTOSEL 5.4 18/80] ath10k: fix VHT NSS calculation when STBC is enabled

[Sasha Levin]

From: Sathishkumar Muruganandam <murugana@codeaurora.org>

[ Upstream commit 99f41b8e43b8b4b31262adb8ac3e69088fff1289 ]

When STBC is enabled, NSTS_SU value need to be accounted for VHT NSS
calculation for SU case.

Without this fix, 1SS + STBC enabled case was reported wrongly as 2SS
in radiotap header on monitor mode capture.

Tested-on: QCA9984 10.4-3.10-00047

Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597392971-3897-1-git-send-email-murugana@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 9f0e7b4943ec6..f8f765979c32c 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -941,6 +941,7 @@ static void ath10k_htt_rx_h_rates(struct ath10k *ar,
 	u8 preamble = 0;
 	u8 group_id;
 	u32 info1, info2, info3;
+	u32 stbc, nsts_su;
 
 	info1 = __le32_to_cpu(rxd->ppdu_start.info1);
 	info2 = __le32_to_cpu(rxd->ppdu_start.info2);
@@ -985,11 +986,16 @@ static void ath10k_htt_rx_h_rates(struct ath10k *ar,
 		 */
 		bw = info2 & 3;
 		sgi = info3 & 1;
+		stbc = (info2 >> 3) & 1;
 		group_id = (info2 >> 4) & 0x3F;
 
 		if (GROUP_ID_IS_SU_MIMO(group_id)) {
 			mcs = (info3 >> 4) & 0x0F;
-			nss = ((info2 >> 10) & 0x07) + 1;
+			nsts_su = ((info2 >> 10) & 0x07);
+			if (stbc)
+				nss = (nsts_su >> 2) + 1;
+			else
+				nss = (nsts_su + 1);
 		} else {
 			/* Hardware doesn't decode VHT-SIG-B into Rx descriptor
 			 * so it's impossible to decode MCS. Also since
-- 
2.25.1

[PATCH AUTOSEL 5.4 19/80] drm/brige/megachips: Add checking if ge_b850v3_lvds_init() is working correctly

[Sasha Levin]

From: Nadezda Lutovinova <lutovinova@ispras.ru>

[ Upstream commit f688a345f0d7a6df4dd2aeca8e4f3c05e123a0ee ]

If ge_b850v3_lvds_init() does not allocate memory for ge_b850v3_lvds_ptr,
then a null pointer dereference is accessed.

The patch adds checking of the return value of ge_b850v3_lvds_init().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819143756.30626-1-lutovinova@ispras.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c b/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
index 6e81e5db57f25..b050fd1f3d201 100644
--- a/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
+++ b/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
@@ -295,8 +295,12 @@ static int stdp4028_ge_b850v3_fw_probe(struct i2c_client *stdp4028_i2c,
 				       const struct i2c_device_id *id)
 {
 	struct device *dev = &stdp4028_i2c->dev;
+	int ret;
+
+	ret = ge_b850v3_lvds_init(dev);
 
-	ge_b850v3_lvds_init(dev);
+	if (ret)
+		return ret;
 
 	ge_b850v3_lvds_ptr->stdp4028_i2c = stdp4028_i2c;
 	i2c_set_clientdata(stdp4028_i2c, ge_b850v3_lvds_ptr);
@@ -354,8 +358,12 @@ static int stdp2690_ge_b850v3_fw_probe(struct i2c_client *stdp2690_i2c,
 				       const struct i2c_device_id *id)
 {
 	struct device *dev = &stdp2690_i2c->dev;
+	int ret;
+
+	ret = ge_b850v3_lvds_init(dev);
 
-	ge_b850v3_lvds_init(dev);
+	if (ret)
+		return ret;
 
 	ge_b850v3_lvds_ptr->stdp2690_i2c = stdp2690_i2c;
 	i2c_set_clientdata(stdp2690_i2c, ge_b850v3_lvds_ptr);
-- 
2.25.1

[PATCH AUTOSEL 5.4 20/80] selftests/x86/fsgsbase: Reap a forgotten child

[Sasha Levin]

From: Andy Lutomirski <luto@kernel.org>

[ Upstream commit ab2dd173330a3f07142e68cd65682205036cd00f ]

The ptrace() test forgot to reap its child.  Reap it.

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/e7700a503f30e79ab35a63103938a19893dbeff2.1598461151.git.luto@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/x86/fsgsbase.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/tools/testing/selftests/x86/fsgsbase.c b/tools/testing/selftests/x86/fsgsbase.c
index 15a329da59fa3..5f3aea210e018 100644
--- a/tools/testing/selftests/x86/fsgsbase.c
+++ b/tools/testing/selftests/x86/fsgsbase.c
@@ -499,6 +499,9 @@ static void test_ptrace_write_gsbase(void)
 
 END:
 	ptrace(PTRACE_CONT, child, NULL, NULL);
+	wait(&status);
+	if (!WIFEXITED(status))
+		printf("[WARN]\tChild didn't exit cleanly.\n");
 }
 
 int main()
-- 
2.25.1

[PATCH AUTOSEL 5.4 21/80] media: videodev2.h: RGB BT2020 and HSV are always full range

[Sasha Levin]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit b305dfe2e93434b12d438434461b709641f62af4 ]

The default RGB quantization range for BT.2020 is full range (just as for
all the other RGB pixel encodings), not limited range.

Update the V4L2_MAP_QUANTIZATION_DEFAULT macro and documentation
accordingly.

Also mention that HSV is always full range and cannot be limited range.

When RGB BT2020 was introduced in V4L2 it was not clear whether it should
be limited or full range, but full range is the right (and consistent)
choice.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../media/uapi/v4l/colorspaces-defs.rst         |  9 ++++-----
 .../media/uapi/v4l/colorspaces-details.rst      |  5 ++---
 include/uapi/linux/videodev2.h                  | 17 ++++++++---------
 3 files changed, 14 insertions(+), 17 deletions(-)

diff --git a/Documentation/media/uapi/v4l/colorspaces-defs.rst b/Documentation/media/uapi/v4l/colorspaces-defs.rst
index e122bbe3d799d..aabb08130354a 100644
--- a/Documentation/media/uapi/v4l/colorspaces-defs.rst
+++ b/Documentation/media/uapi/v4l/colorspaces-defs.rst
@@ -36,8 +36,7 @@ whole range, 0-255, dividing the angular value by 1.41. The enum
 :c:type:`v4l2_hsv_encoding` specifies which encoding is used.
 
 .. note:: The default R'G'B' quantization is full range for all
-   colorspaces except for BT.2020 which uses limited range R'G'B'
-   quantization.
+   colorspaces. HSV formats are always full range.
 
 .. tabularcolumns:: |p{6.7cm}|p{10.8cm}|
 
@@ -169,8 +168,8 @@ whole range, 0-255, dividing the angular value by 1.41. The enum
       - Details
     * - ``V4L2_QUANTIZATION_DEFAULT``
       - Use the default quantization encoding as defined by the
-	colorspace. This is always full range for R'G'B' (except for the
-	BT.2020 colorspace) and HSV. It is usually limited range for Y'CbCr.
+	colorspace. This is always full range for R'G'B' and HSV.
+	It is usually limited range for Y'CbCr.
     * - ``V4L2_QUANTIZATION_FULL_RANGE``
       - Use the full range quantization encoding. I.e. the range [0…1] is
 	mapped to [0…255] (with possible clipping to [1…254] to avoid the
@@ -180,4 +179,4 @@ whole range, 0-255, dividing the angular value by 1.41. The enum
     * - ``V4L2_QUANTIZATION_LIM_RANGE``
       - Use the limited range quantization encoding. I.e. the range [0…1]
 	is mapped to [16…235]. Cb and Cr are mapped from [-0.5…0.5] to
-	[16…240].
+	[16…240]. Limited Range cannot be used with HSV.
diff --git a/Documentation/media/uapi/v4l/colorspaces-details.rst b/Documentation/media/uapi/v4l/colorspaces-details.rst
index 8b0ba3668101d..fd0cf57691d87 100644
--- a/Documentation/media/uapi/v4l/colorspaces-details.rst
+++ b/Documentation/media/uapi/v4l/colorspaces-details.rst
@@ -377,9 +377,8 @@ Colorspace BT.2020 (V4L2_COLORSPACE_BT2020)
 The :ref:`itu2020` standard defines the colorspace used by Ultra-high
 definition television (UHDTV). The default transfer function is
 ``V4L2_XFER_FUNC_709``. The default Y'CbCr encoding is
-``V4L2_YCBCR_ENC_BT2020``. The default R'G'B' quantization is limited
-range (!), and so is the default Y'CbCr quantization. The chromaticities
-of the primary colors and the white reference are:
+``V4L2_YCBCR_ENC_BT2020``. The default Y'CbCr quantization is limited range.
+The chromaticities of the primary colors and the white reference are:
 
 
 
diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h
index 530638dffd934..3210b3c82a4a2 100644
--- a/include/uapi/linux/videodev2.h
+++ b/include/uapi/linux/videodev2.h
@@ -371,9 +371,9 @@ enum v4l2_hsv_encoding {
 
 enum v4l2_quantization {
 	/*
-	 * The default for R'G'B' quantization is always full range, except
-	 * for the BT2020 colorspace. For Y'CbCr the quantization is always
-	 * limited range, except for COLORSPACE_JPEG: this is full range.
+	 * The default for R'G'B' quantization is always full range.
+	 * For Y'CbCr the quantization is always limited range, except
+	 * for COLORSPACE_JPEG: this is full range.
 	 */
 	V4L2_QUANTIZATION_DEFAULT     = 0,
 	V4L2_QUANTIZATION_FULL_RANGE  = 1,
@@ -382,14 +382,13 @@ enum v4l2_quantization {
 
 /*
  * Determine how QUANTIZATION_DEFAULT should map to a proper quantization.
- * This depends on whether the image is RGB or not, the colorspace and the
- * Y'CbCr encoding.
+ * This depends on whether the image is RGB or not, the colorspace.
+ * The Y'CbCr encoding is not used anymore, but is still there for backwards
+ * compatibility.
  */
 #define V4L2_MAP_QUANTIZATION_DEFAULT(is_rgb_or_hsv, colsp, ycbcr_enc) \
-	(((is_rgb_or_hsv) && (colsp) == V4L2_COLORSPACE_BT2020) ? \
-	 V4L2_QUANTIZATION_LIM_RANGE : \
-	 (((is_rgb_or_hsv) || (colsp) == V4L2_COLORSPACE_JPEG) ? \
-	 V4L2_QUANTIZATION_FULL_RANGE : V4L2_QUANTIZATION_LIM_RANGE))
+	(((is_rgb_or_hsv) || (colsp) == V4L2_COLORSPACE_JPEG) ? \
+	 V4L2_QUANTIZATION_FULL_RANGE : V4L2_QUANTIZATION_LIM_RANGE)
 
 /*
  * Deprecated names for opRGB colorspace (IEC 61966-2-5)
-- 
2.25.1

[PATCH AUTOSEL 5.4 22/80] media: platform: Improve queue set up flow for bug fixing

[Sasha Levin]

From: Xia Jiang <xia.jiang@mediatek.com>

[ Upstream commit 5095a6413a0cf896ab468009b6142cb0fe617e66 ]

Add checking created buffer size follow in mtk_jpeg_queue_setup().

Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Xia Jiang <xia.jiang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
index ee802fc3bcdfc..9fa1bc5514f3e 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
@@ -571,6 +571,13 @@ static int mtk_jpeg_queue_setup(struct vb2_queue *q,
 	if (!q_data)
 		return -EINVAL;
 
+	if (*num_planes) {
+		for (i = 0; i < *num_planes; i++)
+			if (sizes[i] < q_data->sizeimage[i])
+				return -EINVAL;
+		return 0;
+	}
+
 	*num_planes = q_data->fmt->colplanes;
 	for (i = 0; i < q_data->fmt->colplanes; i++) {
 		sizes[i] = q_data->sizeimage[i];
-- 
2.25.1

[PATCH AUTOSEL 5.4 23/80] usb: typec: tcpm: During PR_SWAP, source caps should be sent only after tSwapSourceStart

[Sasha Levin]

From: Badhri Jagan Sridharan <badhri@google.com>

[ Upstream commit 6bbe2a90a0bb4af8dd99c3565e907fe9b5e7fd88 ]

The patch addresses the compliance test failures while running
TD.PD.CP.E3, TD.PD.CP.E4, TD.PD.CP.E5 of the "Deterministic PD
Compliance MOI" test plan published in https://www.usb.org/usbc.
For a product to be Type-C compliant, it's expected that these tests
are run on usb.org certified Type-C compliance tester as mentioned in
https://www.usb.org/usbc.

The purpose of the tests TD.PD.CP.E3, TD.PD.CP.E4, TD.PD.CP.E5 is to
verify the PR_SWAP response of the device. While doing so, the test
asserts that Source Capabilities message is NOT received from the test
device within tSwapSourceStart min (20 ms) from the time the last bit
of GoodCRC corresponding to the RS_RDY message sent by the UUT was
sent. If it does then the test fails.

This is in line with the requirements from the USB Power Delivery
Specification Revision 3.0, Version 1.2:
"6.6.8.1 SwapSourceStartTimer
The SwapSourceStartTimer Shall be used by the new Source, after a
Power Role Swap or Fast Role Swap, to ensure that it does not send
Source_Capabilities Message before the new Sink is ready to receive
the
Source_Capabilities Message. The new Source Shall Not send the
Source_Capabilities Message earlier than tSwapSourceStart after the
last bit of the EOP of GoodCRC Message sent in response to the PS_RDY
Message sent by the new Source indicating that its power supply is
ready."

The patch makes sure that TCPM does not send the Source_Capabilities
Message within tSwapSourceStart(20ms) by transitioning into
SRC_STARTUP only after  tSwapSourceStart(20ms).

Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200817183828.1895015-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/typec/tcpm/tcpm.c | 2 +-
 include/linux/usb/pd.h        | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index 355a2c7fac0b4..16e124753df72 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -3482,7 +3482,7 @@ static void run_state_machine(struct tcpm_port *port)
 		 */
 		tcpm_set_pwr_role(port, TYPEC_SOURCE);
 		tcpm_pd_send_control(port, PD_CTRL_PS_RDY);
-		tcpm_set_state(port, SRC_STARTUP, 0);
+		tcpm_set_state(port, SRC_STARTUP, PD_T_SWAP_SRC_START);
 		break;
 
 	case VCONN_SWAP_ACCEPT:
diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h
index 145c38e351c25..6655ce32feff1 100644
--- a/include/linux/usb/pd.h
+++ b/include/linux/usb/pd.h
@@ -442,6 +442,7 @@ static inline unsigned int rdo_max_power(u32 rdo)
 #define PD_T_ERROR_RECOVERY	100	/* minimum 25 is insufficient */
 #define PD_T_SRCSWAPSTDBY      625     /* Maximum of 650ms */
 #define PD_T_NEWSRC            250     /* Maximum of 275ms */
+#define PD_T_SWAP_SRC_START	20	/* Minimum of 20ms */
 
 #define PD_T_DRP_TRY		100	/* 75 - 150 ms */
 #define PD_T_DRP_TRYWAIT	600	/* 400 - 800 ms */
-- 
2.25.1

[PATCH AUTOSEL 5.4 24/80] media: tw5864: check status of tw5864_frameinterval_get

[Sasha Levin]

From: Tom Rix <trix@redhat.com>

[ Upstream commit 780d815dcc9b34d93ae69385a8465c38d423ff0f ]

clang static analysis reports this problem

tw5864-video.c:773:32: warning: The left expression of the compound
  assignment is an uninitialized value.
  The computed value will also be garbage
        fintv->stepwise.max.numerator *= std_max_fps;
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^

stepwise.max is set with frameinterval, which comes from

	ret = tw5864_frameinterval_get(input, &frameinterval);
	fintv->stepwise.step = frameinterval;
	fintv->stepwise.min = frameinterval;
	fintv->stepwise.max = frameinterval;
	fintv->stepwise.max.numerator *= std_max_fps;

When tw5864_frameinterval_get() fails, frameinterval is not
set. So check the status and fix another similar problem.

Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/tw5864/tw5864-video.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/media/pci/tw5864/tw5864-video.c b/drivers/media/pci/tw5864/tw5864-video.c
index 09732eed7eb4f..656142c7a2cc7 100644
--- a/drivers/media/pci/tw5864/tw5864-video.c
+++ b/drivers/media/pci/tw5864/tw5864-video.c
@@ -767,6 +767,9 @@ static int tw5864_enum_frameintervals(struct file *file, void *priv,
 	fintv->type = V4L2_FRMIVAL_TYPE_STEPWISE;
 
 	ret = tw5864_frameinterval_get(input, &frameinterval);
+	if (ret)
+		return ret;
+
 	fintv->stepwise.step = frameinterval;
 	fintv->stepwise.min = frameinterval;
 	fintv->stepwise.max = frameinterval;
@@ -785,6 +788,9 @@ static int tw5864_g_parm(struct file *file, void *priv,
 	cp->capability = V4L2_CAP_TIMEPERFRAME;
 
 	ret = tw5864_frameinterval_get(input, &cp->timeperframe);
+	if (ret)
+		return ret;
+
 	cp->timeperframe.numerator *= input->frame_interval;
 	cp->capturemode = 0;
 	cp->readbuffers = 2;
-- 
2.25.1

[PATCH AUTOSEL 5.4 25/80] media: imx274: fix frame interval handling

[Sasha Levin]

From: Hans Verkuil <hverkuil@xs4all.nl>

[ Upstream commit 49b20d981d723fae5a93843c617af2b2c23611ec ]

1) the numerator and/or denominator might be 0, in that case
   fall back to the default frame interval. This is per the spec
   and this caused a v4l2-compliance failure.

2) the updated frame interval wasn't returned in the s_frame_interval
   subdev op.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/imx274.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/media/i2c/imx274.c b/drivers/media/i2c/imx274.c
index 6011cec5e351d..e6aa9f32b6a83 100644
--- a/drivers/media/i2c/imx274.c
+++ b/drivers/media/i2c/imx274.c
@@ -1235,6 +1235,8 @@ static int imx274_s_frame_interval(struct v4l2_subdev *sd,
 	ret = imx274_set_frame_interval(imx274, fi->interval);
 
 	if (!ret) {
+		fi->interval = imx274->frame_interval;
+
 		/*
 		 * exposure time range is decided by frame interval
 		 * need to update it after frame interval changes
@@ -1730,9 +1732,9 @@ static int imx274_set_frame_interval(struct stimx274 *priv,
 		__func__, frame_interval.numerator,
 		frame_interval.denominator);
 
-	if (frame_interval.numerator == 0) {
-		err = -EINVAL;
-		goto fail;
+	if (frame_interval.numerator == 0 || frame_interval.denominator == 0) {
+		frame_interval.denominator = IMX274_DEF_FRAME_RATE;
+		frame_interval.numerator = 1;
 	}
 
 	req_frame_rate = (u32)(frame_interval.denominator
-- 
2.25.1

[PATCH AUTOSEL 5.4 26/80] mmc: via-sdmmc: Fix data race bug

[Sasha Levin]

From: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>

[ Upstream commit 87d7ad089b318b4f319bf57f1daa64eb6d1d10ad ]

via_save_pcictrlreg() should be called with host->lock held
as it writes to pm_pcictrl_reg, otherwise there can be a race
condition between via_sd_suspend() and via_sdc_card_detect().
The same pattern is used in the function via_reset_pcictrl()
as well, where via_save_pcictrlreg() is called with host->lock
held.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Link: https://lore.kernel.org/r/20200822061528.7035-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/via-sdmmc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
index 8d96ecba1b553..d12a068b0f9ed 100644
--- a/drivers/mmc/host/via-sdmmc.c
+++ b/drivers/mmc/host/via-sdmmc.c
@@ -1259,11 +1259,14 @@ static void via_init_sdc_pm(struct via_crdr_mmc_host *host)
 static int via_sd_suspend(struct pci_dev *pcidev, pm_message_t state)
 {
 	struct via_crdr_mmc_host *host;
+	unsigned long flags;
 
 	host = pci_get_drvdata(pcidev);
 
+	spin_lock_irqsave(&host->lock, flags);
 	via_save_pcictrlreg(host);
 	via_save_sdcreg(host);
+	spin_unlock_irqrestore(&host->lock, flags);
 
 	pci_save_state(pcidev);
 	pci_enable_wake(pcidev, pci_choose_state(pcidev, state), 0);
-- 
2.25.1

[PATCH AUTOSEL 5.4 27/80] drm/bridge/synopsys: dsi: add support for non-continuous HS clock

[Sasha Levin]

From: Antonio Borneo <antonio.borneo@st.com>

[ Upstream commit c6d94e37bdbb6dfe7e581e937a915ab58399b8a5 ]

Current code enables the HS clock when video mode is started or to
send out a HS command, and disables the HS clock to send out a LP
command. This is not what DSI spec specify.

Enable HS clock either in command and in video mode.
Set automatic HS clock management for panels and devices that
support non-continuous HS clock.

Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200701194234.18123-1-yannick.fertre@st.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
index 675442bfc1bd7..77384c49fb8dd 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
@@ -365,7 +365,6 @@ static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
 	if (lpm)
 		val |= CMD_MODE_ALL_LP;
 
-	dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
 	dsi_write(dsi, DSI_CMD_MODE_CFG, val);
 }
 
@@ -541,16 +540,22 @@ static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
 static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
 				 unsigned long mode_flags)
 {
+	u32 val;
+
 	dsi_write(dsi, DSI_PWR_UP, RESET);
 
 	if (mode_flags & MIPI_DSI_MODE_VIDEO) {
 		dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
 		dw_mipi_dsi_video_mode_config(dsi);
-		dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
 	} else {
 		dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
 	}
 
+	val = PHY_TXREQUESTCLKHS;
+	if (dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS)
+		val |= AUTO_CLKLANE_CTRL;
+	dsi_write(dsi, DSI_LPCLK_CTRL, val);
+
 	dsi_write(dsi, DSI_PWR_UP, POWERUP);
 }
 
-- 
2.25.1

[PATCH AUTOSEL 5.4 28/80] arm64: topology: Stop using MPIDR for topology information

[Sasha Levin]

From: Valentin Schneider <valentin.schneider@arm.com>

[ Upstream commit 3102bc0e6ac752cc5df896acb557d779af4d82a1 ]

In the absence of ACPI or DT topology data, we fallback to haphazardly
decoding *something* out of MPIDR. Sadly, the contents of that register are
mostly unusable due to the implementation leniancy and things like Aff0
having to be capped to 15 (despite being encoded on 8 bits).

Consider a simple system with a single package of 32 cores, all under the
same LLC. We ought to be shoving them in the same core_sibling mask, but
MPIDR is going to look like:

  | CPU  | 0 | ... | 15 | 16 | ... | 31 |
  |------+---+-----+----+----+-----+----+
  | Aff0 | 0 | ... | 15 |  0 | ... | 15 |
  | Aff1 | 0 | ... |  0 |  1 | ... |  1 |
  | Aff2 | 0 | ... |  0 |  0 | ... |  0 |

Which will eventually yield

  core_sibling(0-15)  == 0-15
  core_sibling(16-31) == 16-31

NUMA woes
=========

If we try to play games with this and set up NUMA boundaries within those
groups of 16 cores via e.g. QEMU:

  # Node0: 0-9; Node1: 10-19
  $ qemu-system-aarch64 <blah> \
    -smp 20 -numa node,cpus=0-9,nodeid=0 -numa node,cpus=10-19,nodeid=1

The scheduler's MC domain (all CPUs with same LLC) is going to be built via

  arch_topology.c::cpu_coregroup_mask()

In there we try to figure out a sensible mask out of the topology
information we have. In short, here we'll pick the smallest of NUMA or
core sibling mask.

  node_mask(CPU9)    == 0-9
  core_sibling(CPU9) == 0-15

MC mask for CPU9 will thus be 0-9, not a problem.

  node_mask(CPU10)    == 10-19
  core_sibling(CPU10) == 0-15

MC mask for CPU10 will thus be 10-19, not a problem.

  node_mask(CPU16)    == 10-19
  core_sibling(CPU16) == 16-19

MC mask for CPU16 will thus be 16-19... Uh oh. CPUs 16-19 are in two
different unique MC spans, and the scheduler has no idea what to make of
that. That triggers the WARN_ON() added by commit

  ccf74128d66c ("sched/topology: Assert non-NUMA topology masks don't (partially) overlap")

Fixing MPIDR-derived topology
=============================

We could try to come up with some cleverer scheme to figure out which of
the available masks to pick, but really if one of those masks resulted from
MPIDR then it should be discarded because it's bound to be bogus.

I was hoping to give MPIDR a chance for SMT, to figure out which threads are
in the same core using Aff1-3 as core ID, but Sudeep and Robin pointed out
to me that there are systems out there where *all* cores have non-zero
values in their higher affinity fields (e.g. RK3288 has "5" in all of its
cores' MPIDR.Aff1), which would expose a bogus core ID to userspace.

Stop using MPIDR for topology information. When no other source of topology
information is available, mark each CPU as its own core and its NUMA node
as its LLC domain.

Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20200829130016.26106-1-valentin.schneider@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/topology.c | 32 +++++++++++++++++---------------
 1 file changed, 17 insertions(+), 15 deletions(-)

diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c
index fa9528dfd0ce3..113903db666c0 100644
--- a/arch/arm64/kernel/topology.c
+++ b/arch/arm64/kernel/topology.c
@@ -35,21 +35,23 @@ void store_cpu_topology(unsigned int cpuid)
 	if (mpidr & MPIDR_UP_BITMASK)
 		return;
 
-	/* Create cpu topology mapping based on MPIDR. */
-	if (mpidr & MPIDR_MT_BITMASK) {
-		/* Multiprocessor system : Multi-threads per core */
-		cpuid_topo->thread_id  = MPIDR_AFFINITY_LEVEL(mpidr, 0);
-		cpuid_topo->core_id    = MPIDR_AFFINITY_LEVEL(mpidr, 1);
-		cpuid_topo->package_id = MPIDR_AFFINITY_LEVEL(mpidr, 2) |
-					 MPIDR_AFFINITY_LEVEL(mpidr, 3) << 8;
-	} else {
-		/* Multiprocessor system : Single-thread per core */
-		cpuid_topo->thread_id  = -1;
-		cpuid_topo->core_id    = MPIDR_AFFINITY_LEVEL(mpidr, 0);
-		cpuid_topo->package_id = MPIDR_AFFINITY_LEVEL(mpidr, 1) |
-					 MPIDR_AFFINITY_LEVEL(mpidr, 2) << 8 |
-					 MPIDR_AFFINITY_LEVEL(mpidr, 3) << 16;
-	}
+	/*
+	 * This would be the place to create cpu topology based on MPIDR.
+	 *
+	 * However, it cannot be trusted to depict the actual topology; some
+	 * pieces of the architecture enforce an artificial cap on Aff0 values
+	 * (e.g. GICv3's ICC_SGI1R_EL1 limits it to 15), leading to an
+	 * artificial cycling of Aff1, Aff2 and Aff3 values. IOW, these end up
+	 * having absolutely no relationship to the actual underlying system
+	 * topology, and cannot be reasonably used as core / package ID.
+	 *
+	 * If the MT bit is set, Aff0 *could* be used to define a thread ID, but
+	 * we still wouldn't be able to obtain a sane core ID. This means we
+	 * need to entirely ignore MPIDR for any topology deduction.
+	 */
+	cpuid_topo->thread_id  = -1;
+	cpuid_topo->core_id    = cpuid;
+	cpuid_topo->package_id = cpu_to_node(cpuid);
 
 	pr_debug("CPU%u: cluster %d core %d thread %d mpidr %#016llx\n",
 		 cpuid, cpuid_topo->package_id, cpuid_topo->core_id,
-- 
2.25.1

[PATCH AUTOSEL 5.4 29/80] printk: reduce LOG_BUF_SHIFT range for H8300

[Sasha Levin]

From: John Ogness <john.ogness@linutronix.de>

[ Upstream commit 550c10d28d21bd82a8bb48debbb27e6ed53262f6 ]

The .bss section for the h8300 is relatively small. A value of
CONFIG_LOG_BUF_SHIFT that is larger than 19 will create a static
printk ringbuffer that is too large. Limit the range appropriately
for the H8300.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200812073122.25412-1-john.ogness@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 init/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/init/Kconfig b/init/Kconfig
index 6db3e310a5e42..96fc45d1b686b 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -594,7 +594,8 @@ config IKHEADERS
 
 config LOG_BUF_SHIFT
 	int "Kernel log buffer size (16 => 64KB, 17 => 128KB)"
-	range 12 25
+	range 12 25 if !H8300
+	range 12 19 if H8300
 	default 17
 	depends on PRINTK
 	help
-- 
2.25.1

[PATCH AUTOSEL 5.4 30/80] ia64: kprobes: Use generic kretprobe trampoline handler

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit e792ff804f49720ce003b3e4c618b5d996256a18 ]

Use the generic kretprobe trampoline handler. Don't use
framepointer verification.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/159870606883.1229682.12331813108378725668.stgit@devnote2
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/ia64/kernel/kprobes.c | 77 +-------------------------------------
 1 file changed, 2 insertions(+), 75 deletions(-)

diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c
index b8356edbde659..b3dc39050c1ad 100644
--- a/arch/ia64/kernel/kprobes.c
+++ b/arch/ia64/kernel/kprobes.c
@@ -396,83 +396,9 @@ static void kretprobe_trampoline(void)
 {
 }
 
-/*
- * At this point the target function has been tricked into
- * returning into our trampoline.  Lookup the associated instance
- * and then:
- *    - call the handler function
- *    - cleanup by marking the instance as unused
- *    - long jump back to the original return address
- */
 int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 {
-	struct kretprobe_instance *ri = NULL;
-	struct hlist_head *head, empty_rp;
-	struct hlist_node *tmp;
-	unsigned long flags, orig_ret_address = 0;
-	unsigned long trampoline_address =
-		((struct fnptr *)kretprobe_trampoline)->ip;
-
-	INIT_HLIST_HEAD(&empty_rp);
-	kretprobe_hash_lock(current, &head, &flags);
-
-	/*
-	 * It is possible to have multiple instances associated with a given
-	 * task either because an multiple functions in the call path
-	 * have a return probe installed on them, and/or more than one return
-	 * return probe was registered for a target function.
-	 *
-	 * We can handle this because:
-	 *     - instances are always inserted at the head of the list
-	 *     - when multiple return probes are registered for the same
-	 *       function, the first instance's ret_addr will point to the
-	 *       real return address, and all the rest will point to
-	 *       kretprobe_trampoline
-	 */
-	hlist_for_each_entry_safe(ri, tmp, head, hlist) {
-		if (ri->task != current)
-			/* another task is sharing our hash bucket */
-			continue;
-
-		orig_ret_address = (unsigned long)ri->ret_addr;
-		if (orig_ret_address != trampoline_address)
-			/*
-			 * This is the real return address. Any other
-			 * instances associated with this task are for
-			 * other calls deeper on the call stack
-			 */
-			break;
-	}
-
-	regs->cr_iip = orig_ret_address;
-
-	hlist_for_each_entry_safe(ri, tmp, head, hlist) {
-		if (ri->task != current)
-			/* another task is sharing our hash bucket */
-			continue;
-
-		if (ri->rp && ri->rp->handler)
-			ri->rp->handler(ri, regs);
-
-		orig_ret_address = (unsigned long)ri->ret_addr;
-		recycle_rp_inst(ri, &empty_rp);
-
-		if (orig_ret_address != trampoline_address)
-			/*
-			 * This is the real return address. Any other
-			 * instances associated with this task are for
-			 * other calls deeper on the call stack
-			 */
-			break;
-	}
-	kretprobe_assert(ri, orig_ret_address, trampoline_address);
-
-	kretprobe_hash_unlock(current, &flags);
-
-	hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {
-		hlist_del(&ri->hlist);
-		kfree(ri);
-	}
+	regs->cr_iip = __kretprobe_trampoline_handler(regs, kretprobe_trampoline, NULL);
 	/*
 	 * By returning a non-zero value, we are telling
 	 * kprobe_handler() that we don't want the post_handler
@@ -485,6 +411,7 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
 	ri->ret_addr = (kprobe_opcode_t *)regs->b0;
+	ri->fp = NULL;
 
 	/* Replace the return addr with trampoline addr */
 	regs->b0 = ((struct fnptr *)kretprobe_trampoline)->ip;
-- 
2.25.1

[PATCH AUTOSEL 5.4 31/80] kgdb: Make "kgdbcon" work properly with "kgdb_earlycon"

[Sasha Levin]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit b18b099e04f450cdc77bec72acefcde7042bd1f3 ]

On my system the kernel processes the "kgdb_earlycon" parameter before
the "kgdbcon" parameter.  When we setup "kgdb_earlycon" we'll end up
in kgdb_register_callbacks() and "kgdb_use_con" won't have been set
yet so we'll never get around to starting "kgdbcon".  Let's remedy
this by detecting that the IO module was already registered when
setting "kgdb_use_con" and registering the console then.

As part of this, to avoid pre-declaring things, move the handling of
the "kgdbcon" further down in the file.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200630151422.1.I4aa062751ff5e281f5116655c976dff545c09a46@changeid
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/debug/debug_core.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index 2222f3225e53d..097ab02989f92 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -96,14 +96,6 @@ int dbg_switch_cpu;
 /* Use kdb or gdbserver mode */
 int dbg_kdb_mode = 1;
 
-static int __init opt_kgdb_con(char *str)
-{
-	kgdb_use_con = 1;
-	return 0;
-}
-
-early_param("kgdbcon", opt_kgdb_con);
-
 module_param(kgdb_use_con, int, 0644);
 module_param(kgdbreboot, int, 0644);
 
@@ -876,6 +868,20 @@ static struct console kgdbcons = {
 	.index		= -1,
 };
 
+static int __init opt_kgdb_con(char *str)
+{
+	kgdb_use_con = 1;
+
+	if (kgdb_io_module_registered && !kgdb_con_registered) {
+		register_console(&kgdbcons);
+		kgdb_con_registered = 1;
+	}
+
+	return 0;
+}
+
+early_param("kgdbcon", opt_kgdb_con);
+
 #ifdef CONFIG_MAGIC_SYSRQ
 static void sysrq_handle_dbg(int key)
 {
-- 
2.25.1

[PATCH AUTOSEL 5.4 32/80] bpf: Permit map_ptr arithmetic with opcode add and offset 0

[Sasha Levin]

From: Yonghong Song <yhs@fb.com>

[ Upstream commit 7c6967326267bd5c0dded0a99541357d70dd11ac ]

Commit 41c48f3a98231 ("bpf: Support access
to bpf map fields") added support to access map fields
with CORE support. For example,

            struct bpf_map {
                    __u32 max_entries;
            } __attribute__((preserve_access_index));

            struct bpf_array {
                    struct bpf_map map;
                    __u32 elem_size;
            } __attribute__((preserve_access_index));

            struct {
                    __uint(type, BPF_MAP_TYPE_ARRAY);
                    __uint(max_entries, 4);
                    __type(key, __u32);
                    __type(value, __u32);
            } m_array SEC(".maps");

            SEC("cgroup_skb/egress")
            int cg_skb(void *ctx)
            {
                    struct bpf_array *array = (struct bpf_array *)&m_array;

                    /* .. array->map.max_entries .. */
            }

In kernel, bpf_htab has similar structure,

	    struct bpf_htab {
		    struct bpf_map map;
                    ...
            }

In the above cg_skb(), to access array->map.max_entries, with CORE, the clang will
generate two builtin's.
            base = &m_array;
            /* access array.map */
            map_addr = __builtin_preserve_struct_access_info(base, 0, 0);
            /* access array.map.max_entries */
            max_entries_addr = __builtin_preserve_struct_access_info(map_addr, 0, 0);
	    max_entries = *max_entries_addr;

In the current llvm, if two builtin's are in the same function or
in the same function after inlining, the compiler is smart enough to chain
them together and generates like below:
            base = &m_array;
            max_entries = *(base + reloc_offset); /* reloc_offset = 0 in this case */
and we are fine.

But if we force no inlining for one of functions in test_map_ptr() selftest, e.g.,
check_default(), the above two __builtin_preserve_* will be in two different
functions. In this case, we will have code like:
   func check_hash():
            reloc_offset_map = 0;
            base = &m_array;
            map_base = base + reloc_offset_map;
            check_default(map_base, ...)
   func check_default(map_base, ...):
            max_entries = *(map_base + reloc_offset_max_entries);

In kernel, map_ptr (CONST_PTR_TO_MAP) does not allow any arithmetic.
The above "map_base = base + reloc_offset_map" will trigger a verifier failure.
  ; VERIFY(check_default(&hash->map, map));
  0: (18) r7 = 0xffffb4fe8018a004
  2: (b4) w1 = 110
  3: (63) *(u32 *)(r7 +0) = r1
   R1_w=invP110 R7_w=map_value(id=0,off=4,ks=4,vs=8,imm=0) R10=fp0
  ; VERIFY_TYPE(BPF_MAP_TYPE_HASH, check_hash);
  4: (18) r1 = 0xffffb4fe8018a000
  6: (b4) w2 = 1
  7: (63) *(u32 *)(r1 +0) = r2
   R1_w=map_value(id=0,off=0,ks=4,vs=8,imm=0) R2_w=invP1 R7_w=map_value(id=0,off=4,ks=4,vs=8,imm=0) R10=fp0
  8: (b7) r2 = 0
  9: (18) r8 = 0xffff90bcb500c000
  11: (18) r1 = 0xffff90bcb500c000
  13: (0f) r1 += r2
  R1 pointer arithmetic on map_ptr prohibited

To fix the issue, let us permit map_ptr + 0 arithmetic which will
result in exactly the same map_ptr.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200908175702.2463625-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/verifier.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index ae27dd77a73cb..bd0a5ead2af0c 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -4398,6 +4398,10 @@ static int adjust_ptr_min_max_vals(struct bpf_verifier_env *env,
 			dst, reg_type_str[ptr_reg->type]);
 		return -EACCES;
 	case CONST_PTR_TO_MAP:
+		/* smin_val represents the known value */
+		if (known && smin_val == 0 && opcode == BPF_ADD)
+			break;
+		/* fall-through */
 	case PTR_TO_PACKET_END:
 	case PTR_TO_SOCKET:
 	case PTR_TO_SOCKET_OR_NULL:
-- 
2.25.1

[PATCH AUTOSEL 5.4 33/80] media: uvcvideo: Fix dereference of out-of-bound list iterator

[Sasha Levin]

From: "Daniel W. S. Almeida" <dwlsalmeida@gmail.com>

[ Upstream commit f875bcc375c738bf2f599ff2e1c5b918dbd07c45 ]

Fixes the following coccinelle report:

drivers/media/usb/uvc/uvc_ctrl.c:1860:5-11:
ERROR: invalid reference to the index variable of the iterator on line 1854

by adding a boolean variable to check if the loop has found the

Found using - Coccinelle (http://coccinelle.lip6.fr)

[Replace cursor variable with bool found]

Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/usb/uvc/uvc_ctrl.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/media/usb/uvc/uvc_ctrl.c b/drivers/media/usb/uvc/uvc_ctrl.c
index e399b9fad7574..aed84528758f6 100644
--- a/drivers/media/usb/uvc/uvc_ctrl.c
+++ b/drivers/media/usb/uvc/uvc_ctrl.c
@@ -1844,30 +1844,35 @@ int uvc_xu_ctrl_query(struct uvc_video_chain *chain,
 {
 	struct uvc_entity *entity;
 	struct uvc_control *ctrl;
-	unsigned int i, found = 0;
+	unsigned int i;
+	bool found;
 	u32 reqflags;
 	u16 size;
 	u8 *data = NULL;
 	int ret;
 
 	/* Find the extension unit. */
+	found = false;
 	list_for_each_entry(entity, &chain->entities, chain) {
 		if (UVC_ENTITY_TYPE(entity) == UVC_VC_EXTENSION_UNIT &&
-		    entity->id == xqry->unit)
+		    entity->id == xqry->unit) {
+			found = true;
 			break;
+		}
 	}
 
-	if (entity->id != xqry->unit) {
+	if (!found) {
 		uvc_trace(UVC_TRACE_CONTROL, "Extension unit %u not found.\n",
 			xqry->unit);
 		return -ENOENT;
 	}
 
 	/* Find the control and perform delayed initialization if needed. */
+	found = false;
 	for (i = 0; i < entity->ncontrols; ++i) {
 		ctrl = &entity->controls[i];
 		if (ctrl->index == xqry->selector - 1) {
-			found = 1;
+			found = true;
 			break;
 		}
 	}
-- 
2.25.1

[PATCH AUTOSEL 5.4 34/80] selftests/bpf: Define string const as global for test_sysctl_prog.c

[Sasha Levin]

From: Yonghong Song <yhs@fb.com>

[ Upstream commit 6e057fc15a2da4ee03eb1fa6889cf687e690106e ]

When tweaking llvm optimizations, I found that selftest build failed
with the following error:
  libbpf: elf: skipping unrecognized data section(6) .rodata.str1.1
  libbpf: prog 'sysctl_tcp_mem': bad map relo against '.L__const.is_tcp_mem.tcp_mem_name'
          in section '.rodata.str1.1'
  Error: failed to open BPF object file: Relocation failed
  make: *** [/work/net-next/tools/testing/selftests/bpf/test_sysctl_prog.skel.h] Error 255
  make: *** Deleting file `/work/net-next/tools/testing/selftests/bpf/test_sysctl_prog.skel.h'

The local string constant "tcp_mem_name" is put into '.rodata.str1.1' section
which libbpf cannot handle. Using untweaked upstream llvm, "tcp_mem_name"
is completely inlined after loop unrolling.

Commit 7fb5eefd7639 ("selftests/bpf: Fix test_sysctl_loop{1, 2}
failure due to clang change") solved a similar problem by defining
the string const as a global. Let us do the same here
for test_sysctl_prog.c so it can weather future potential llvm changes.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200910202718.956042-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/progs/test_sysctl_prog.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/bpf/progs/test_sysctl_prog.c b/tools/testing/selftests/bpf/progs/test_sysctl_prog.c
index 5cbbff416998c..4396faf33394a 100644
--- a/tools/testing/selftests/bpf/progs/test_sysctl_prog.c
+++ b/tools/testing/selftests/bpf/progs/test_sysctl_prog.c
@@ -19,11 +19,11 @@
 #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
 #endif
 
+const char tcp_mem_name[] = "net/ipv4/tcp_mem";
 static __always_inline int is_tcp_mem(struct bpf_sysctl *ctx)
 {
-	char tcp_mem_name[] = "net/ipv4/tcp_mem";
 	unsigned char i;
-	char name[64];
+	char name[sizeof(tcp_mem_name)];
 	int ret;
 
 	memset(name, 0, sizeof(name));
-- 
2.25.1

[PATCH AUTOSEL 5.4 35/80] samples/bpf: Fix possible deadlock in xdpsock

[Sasha Levin]

From: Magnus Karlsson <magnus.karlsson@intel.com>

[ Upstream commit 5a2a0dd88f0f267ac5953acd81050ae43a82201f ]

Fix a possible deadlock in the l2fwd application in xdpsock that can
occur when there is no space in the Tx ring. There are two ways to get
the kernel to consume entries in the Tx ring: calling sendto() to make
it send packets and freeing entries from the completion ring, as the
kernel will not send a packet if there is no space for it to add a
completion entry in the completion ring. The Tx loop in l2fwd only
used to call sendto(). This patches adds cleaning the completion ring
in that loop.

Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/1599726666-8431-3-git-send-email-magnus.karlsson@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 samples/bpf/xdpsock_user.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/samples/bpf/xdpsock_user.c b/samples/bpf/xdpsock_user.c
index df011ac334022..79d1005ff2ee3 100644
--- a/samples/bpf/xdpsock_user.c
+++ b/samples/bpf/xdpsock_user.c
@@ -677,6 +677,7 @@ static void l2fwd(struct xsk_socket_info *xsk, struct pollfd *fds)
 	while (ret != rcvd) {
 		if (ret < 0)
 			exit_with_error(-ret);
+		complete_tx_l2fwd(xsk, fds);
 		if (xsk_ring_prod__needs_wakeup(&xsk->tx))
 			kick_tx(xsk);
 		ret = xsk_ring_prod__reserve(&xsk->tx, rcvd, &idx_tx);
-- 
2.25.1

[PATCH AUTOSEL 5.4 36/80] riscv: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO

[Sasha Levin]

From: Zong Li <zong.li@sifive.com>

[ Upstream commit b5fca7c55f9fbab5ad732c3bce00f31af6ba5cfa ]

AT_VECTOR_SIZE_ARCH should be defined with the maximum number of
NEW_AUX_ENT entries that ARCH_DLINFO can contain, but it wasn't defined
for RISC-V at all even though ARCH_DLINFO will contain one NEW_AUX_ENT
for the VDSO address.

Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/include/uapi/asm/auxvec.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/riscv/include/uapi/asm/auxvec.h b/arch/riscv/include/uapi/asm/auxvec.h
index d86cb17bbabe6..22e0ae8884061 100644
--- a/arch/riscv/include/uapi/asm/auxvec.h
+++ b/arch/riscv/include/uapi/asm/auxvec.h
@@ -10,4 +10,7 @@
 /* vDSO location */
 #define AT_SYSINFO_EHDR 33
 
+/* entries in ARCH_DLINFO */
+#define AT_VECTOR_SIZE_ARCH	1
+
 #endif /* _UAPI_ASM_RISCV_AUXVEC_H */
-- 
2.25.1

[PATCH AUTOSEL 5.4 37/80] cpufreq: sti-cpufreq: add stih418 support

[Sasha Levin]

From: Alain Volmat <avolmat@me.com>

[ Upstream commit 01a163c52039e9426c7d3d3ab16ca261ad622597 ]

The STiH418 can be controlled the same way as STiH407 &
STiH410 regarding cpufreq.

Signed-off-by: Alain Volmat <avolmat@me.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/sti-cpufreq.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/cpufreq/sti-cpufreq.c b/drivers/cpufreq/sti-cpufreq.c
index 8f16bbb164b84..2855b7878a204 100644
--- a/drivers/cpufreq/sti-cpufreq.c
+++ b/drivers/cpufreq/sti-cpufreq.c
@@ -141,7 +141,8 @@ static const struct reg_field sti_stih407_dvfs_regfields[DVFS_MAX_REGFIELDS] = {
 static const struct reg_field *sti_cpufreq_match(void)
 {
 	if (of_machine_is_compatible("st,stih407") ||
-	    of_machine_is_compatible("st,stih410"))
+	    of_machine_is_compatible("st,stih410") ||
+	    of_machine_is_compatible("st,stih418"))
 		return sti_stih407_dvfs_regfields;
 
 	return NULL;
@@ -258,7 +259,8 @@ static int sti_cpufreq_init(void)
 	int ret;
 
 	if ((!of_machine_is_compatible("st,stih407")) &&
-		(!of_machine_is_compatible("st,stih410")))
+		(!of_machine_is_compatible("st,stih410")) &&
+		(!of_machine_is_compatible("st,stih418")))
 		return -ENODEV;
 
 	ddata.cpu = get_cpu_device(0);
-- 
2.25.1

[PATCH AUTOSEL 5.4 38/80] USB: adutux: fix debugging

[Sasha Levin]

From: Oliver Neukum <oneukum@suse.com>

[ Upstream commit c56150c1bc8da5524831b1dac2eec3c67b89f587 ]

Handling for removal of the controller was missing at one place.
Add it.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20200917112600.26508-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/misc/adutux.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index d8d157c4c271d..96495fcd952aa 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -209,6 +209,7 @@ static void adu_interrupt_out_callback(struct urb *urb)
 
 	if (status != 0) {
 		if ((status != -ENOENT) &&
+		    (status != -ESHUTDOWN) &&
 		    (status != -ECONNRESET)) {
 			dev_dbg(&dev->udev->dev,
 				"%s :nonzero status received: %d\n", __func__,
-- 
2.25.1

[PATCH AUTOSEL 5.4 39/80] uio: free uio id after uio file node is freed

[Sasha Levin]

From: Lang Dai <lang.dai@intel.com>

[ Upstream commit 8fd0e2a6df262539eaa28b0a2364cca10d1dc662 ]

uio_register_device() do two things.
1) get an uio id from a global pool, e.g. the id is <A>
2) create file nodes like /sys/class/uio/uio<A>

uio_unregister_device() do two things.
1) free the uio id <A> and return it to the global pool
2) free the file node /sys/class/uio/uio<A>

There is a situation is that one worker is calling uio_unregister_device(),
and another worker is calling uio_register_device().
If the two workers are X and Y, they go as below sequence,
1) X free the uio id <AAA>
2) Y get an uio id <AAA>
3) Y create file node /sys/class/uio/uio<AAA>
4) X free the file note /sys/class/uio/uio<AAA>
Then it will failed at the 3rd step and cause the phenomenon we saw as it
is creating a duplicated file node.

Failure reports as follows:
sysfs: cannot create duplicate filename '/class/uio/uio10'
Call Trace:
   sysfs_do_create_link_sd.isra.2+0x9e/0xb0
   sysfs_create_link+0x25/0x40
   device_add+0x2c4/0x640
   __uio_register_device+0x1c5/0x576 [uio]
   adf_uio_init_bundle_dev+0x231/0x280 [intel_qat]
   adf_uio_register+0x1c0/0x340 [intel_qat]
   adf_dev_start+0x202/0x370 [intel_qat]
   adf_dev_start_async+0x40/0xa0 [intel_qat]
   process_one_work+0x14d/0x410
   worker_thread+0x4b/0x460
   kthread+0x105/0x140
 ? process_one_work+0x410/0x410
 ? kthread_bind+0x40/0x40
 ret_from_fork+0x1f/0x40
 Code: 85 c0 48 89 c3 74 12 b9 00 10 00 00 48 89 c2 31 f6 4c 89 ef
 e8 ec c4 ff ff 4c 89 e2 48 89 de 48 c7 c7 e8 b4 ee b4 e8 6a d4 d7
 ff <0f> 0b 48 89 df e8 20 fa f3 ff 5b 41 5c 41 5d 5d c3 66 0f 1f 84
---[ end trace a7531c1ed5269e84 ]---
 c6xxvf b002:00:00.0: Failed to register UIO devices
 c6xxvf b002:00:00.0: Failed to register UIO devices

Signed-off-by: Lang Dai <lang.dai@intel.com>

Link: https://lore.kernel.org/r/1600054002-17722-1-git-send-email-lang.dai@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/uio/uio.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index a57698985f9c4..8313f81968d51 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -1010,8 +1010,6 @@ void uio_unregister_device(struct uio_info *info)
 
 	idev = info->uio_dev;
 
-	uio_free_minor(idev);
-
 	mutex_lock(&idev->info_lock);
 	uio_dev_del_attributes(idev);
 
@@ -1026,6 +1024,8 @@ void uio_unregister_device(struct uio_info *info)
 
 	device_unregister(&idev->dev);
 
+	uio_free_minor(idev);
+
 	return;
 }
 EXPORT_SYMBOL_GPL(uio_unregister_device);
-- 
2.25.1

[PATCH AUTOSEL 5.4 40/80] coresight: Make sysfs functional on topologies with per core sink

[Sasha Levin]

From: Linu Cherian <lcherian@marvell.com>

[ Upstream commit 6d578258b955fc8888e1bbd9a8fefe7b10065a84 ]

Coresight driver assumes sink is common across all the ETMs,
and tries to build a path between ETM and the first enabled
sink found using bus based search. This breaks sysFS usage
on implementations that has multiple per core sinks in
enabled state.

To fix this, coresight_get_enabled_sink API is updated to
do a connection based search starting from the given source,
instead of bus based search.
With sink selection using sysfs depecrated for perf interface,
provision for reset is removed as well in this API.

Signed-off-by: Linu Cherian <lcherian@marvell.com>
[Fixed indentation problem and removed obsolete comment]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-15-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwtracing/coresight/coresight-priv.h |  3 +-
 drivers/hwtracing/coresight/coresight.c      | 62 +++++++++-----------
 2 files changed, 29 insertions(+), 36 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-priv.h b/drivers/hwtracing/coresight/coresight-priv.h
index 82e563cdc8794..dfd24b85a5775 100644
--- a/drivers/hwtracing/coresight/coresight-priv.h
+++ b/drivers/hwtracing/coresight/coresight-priv.h
@@ -147,7 +147,8 @@ static inline void coresight_write_reg_pair(void __iomem *addr, u64 val,
 void coresight_disable_path(struct list_head *path);
 int coresight_enable_path(struct list_head *path, u32 mode, void *sink_data);
 struct coresight_device *coresight_get_sink(struct list_head *path);
-struct coresight_device *coresight_get_enabled_sink(bool reset);
+struct coresight_device *
+coresight_get_enabled_sink(struct coresight_device *source);
 struct coresight_device *coresight_get_sink_by_id(u32 id);
 struct list_head *coresight_build_path(struct coresight_device *csdev,
 				       struct coresight_device *sink);
diff --git a/drivers/hwtracing/coresight/coresight.c b/drivers/hwtracing/coresight/coresight.c
index 0bbce0d291582..90ecd04a2f20b 100644
--- a/drivers/hwtracing/coresight/coresight.c
+++ b/drivers/hwtracing/coresight/coresight.c
@@ -481,50 +481,46 @@ struct coresight_device *coresight_get_sink(struct list_head *path)
 	return csdev;
 }
 
-static int coresight_enabled_sink(struct device *dev, const void *data)
+static struct coresight_device *
+coresight_find_enabled_sink(struct coresight_device *csdev)
 {
-	const bool *reset = data;
-	struct coresight_device *csdev = to_coresight_device(dev);
+	int i;
+	struct coresight_device *sink;
 
 	if ((csdev->type == CORESIGHT_DEV_TYPE_SINK ||
 	     csdev->type == CORESIGHT_DEV_TYPE_LINKSINK) &&
-	     csdev->activated) {
-		/*
-		 * Now that we have a handle on the sink for this session,
-		 * disable the sysFS "enable_sink" flag so that possible
-		 * concurrent perf session that wish to use another sink don't
-		 * trip on it.  Doing so has no ramification for the current
-		 * session.
-		 */
-		if (*reset)
-			csdev->activated = false;
+	     csdev->activated)
+		return csdev;
 
-		return 1;
+	/*
+	 * Recursively explore each port found on this element.
+	 */
+	for (i = 0; i < csdev->pdata->nr_outport; i++) {
+		struct coresight_device *child_dev;
+
+		child_dev = csdev->pdata->conns[i].child_dev;
+		if (child_dev)
+			sink = coresight_find_enabled_sink(child_dev);
+		if (sink)
+			return sink;
 	}
 
-	return 0;
+	return NULL;
 }
 
 /**
- * coresight_get_enabled_sink - returns the first enabled sink found on the bus
- * @deactivate:	Whether the 'enable_sink' flag should be reset
+ * coresight_get_enabled_sink - returns the first enabled sink using
+ * connection based search starting from the source reference
  *
- * When operated from perf the deactivate parameter should be set to 'true'.
- * That way the "enabled_sink" flag of the sink that was selected can be reset,
- * allowing for other concurrent perf sessions to choose a different sink.
- *
- * When operated from sysFS users have full control and as such the deactivate
- * parameter should be set to 'false', hence mandating users to explicitly
- * clear the flag.
+ * @source: Coresight source device reference
  */
-struct coresight_device *coresight_get_enabled_sink(bool deactivate)
+struct coresight_device *
+coresight_get_enabled_sink(struct coresight_device *source)
 {
-	struct device *dev = NULL;
-
-	dev = bus_find_device(&coresight_bustype, NULL, &deactivate,
-			      coresight_enabled_sink);
+	if (!source)
+		return NULL;
 
-	return dev ? to_coresight_device(dev) : NULL;
+	return coresight_find_enabled_sink(source);
 }
 
 static int coresight_sink_by_id(struct device *dev, const void *data)
@@ -764,11 +760,7 @@ int coresight_enable(struct coresight_device *csdev)
 		goto out;
 	}
 
-	/*
-	 * Search for a valid sink for this session but don't reset the
-	 * "enable_sink" flag in sysFS.  Users get to do that explicitly.
-	 */
-	sink = coresight_get_enabled_sink(false);
+	sink = coresight_get_enabled_sink(csdev);
 	if (!sink) {
 		ret = -EINVAL;
 		goto out;
-- 
2.25.1

[PATCH AUTOSEL 5.4 41/80] usb: xhci: omit duplicate actions when suspending a runtime suspended host.

[Sasha Levin]

From: Peter Chen <peter.chen@nxp.com>

[ Upstream commit 18a367e8947d72dd91b6fc401e88a2952c6363f7 ]

If the xhci-plat.c is the platform driver, after the runtime pm is
enabled, the xhci_suspend is called if nothing is connected on
the port. When the system goes to suspend, it will call xhci_suspend again
if USB wakeup is enabled.

Since the runtime suspend wakeup setting is not always the same as
system suspend wakeup setting, eg, at runtime suspend we always need
wakeup if the controller is in low power mode; but at system suspend,
we may not need wakeup. So, we move the judgement after changing
wakeup setting.

[commit message rewording -Mathias]

Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200918131752.16488-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index bad154f446f8d..51116030852e9 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -982,12 +982,15 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
 			xhci->shared_hcd->state != HC_STATE_SUSPENDED)
 		return -EINVAL;
 
-	xhci_dbc_suspend(xhci);
-
 	/* Clear root port wake on bits if wakeup not allowed. */
 	if (!do_wakeup)
 		xhci_disable_port_wake_on_bits(xhci);
 
+	if (!HCD_HW_ACCESSIBLE(hcd))
+		return 0;
+
+	xhci_dbc_suspend(xhci);
+
 	/* Don't poll the roothubs on bus suspend. */
 	xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
 	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
-- 
2.25.1

[PATCH AUTOSEL 5.4 42/80] SUNRPC: Mitigate cond_resched() in xprt_transmit()

[Sasha Levin]

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit 6f9f17287e78e5049931af2037b15b26d134a32a ]

The original purpose of this expensive call is to prevent a long
queue of requests from blocking other work.

The cond_resched() call is unnecessary after just a single send
operation.

For longer queues, instead of invoking the kernel scheduler, simply
release the transport send lock and return to the RPC scheduler.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/xprt.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index 41df4c507193b..a6fee86f400ec 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -1503,10 +1503,13 @@ xprt_transmit(struct rpc_task *task)
 {
 	struct rpc_rqst *next, *req = task->tk_rqstp;
 	struct rpc_xprt	*xprt = req->rq_xprt;
-	int status;
+	int counter, status;
 
 	spin_lock(&xprt->queue_lock);
+	counter = 0;
 	while (!list_empty(&xprt->xmit_queue)) {
+		if (++counter == 20)
+			break;
 		next = list_first_entry(&xprt->xmit_queue,
 				struct rpc_rqst, rq_xmit);
 		xprt_pin_rqst(next);
@@ -1514,7 +1517,6 @@ xprt_transmit(struct rpc_task *task)
 		status = xprt_request_transmit(next, task);
 		if (status == -EBADMSG && next != req)
 			status = 0;
-		cond_resched();
 		spin_lock(&xprt->queue_lock);
 		xprt_unpin_rqst(next);
 		if (status == 0) {
-- 
2.25.1

[PATCH AUTOSEL 5.4 43/80] arm64/mm: return cpu_all_mask when node is NUMA_NO_NODE

[Sasha Levin]

From: Zhengyuan Liu <liuzhengyuan@tj.kylinos.cn>

[ Upstream commit a194c5f2d2b3a05428805146afcabe5140b5d378 ]

The @node passed to cpumask_of_node() can be NUMA_NO_NODE, in that
case it will trigger the following WARN_ON(node >= nr_node_ids) due to
mismatched data types of @node and @nr_node_ids. Actually we should
return cpu_all_mask just like most other architectures do if passed
NUMA_NO_NODE.

Also add a similar check to the inline cpumask_of_node() in numa.h.

Signed-off-by: Zhengyuan Liu <liuzhengyuan@tj.kylinos.cn>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20200921023936.21846-1-liuzhengyuan@tj.kylinos.cn
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/numa.h | 3 +++
 arch/arm64/mm/numa.c          | 6 +++++-
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/include/asm/numa.h b/arch/arm64/include/asm/numa.h
index 626ad01e83bf0..dd870390d639f 100644
--- a/arch/arm64/include/asm/numa.h
+++ b/arch/arm64/include/asm/numa.h
@@ -25,6 +25,9 @@ const struct cpumask *cpumask_of_node(int node);
 /* Returns a pointer to the cpumask of CPUs on Node 'node'. */
 static inline const struct cpumask *cpumask_of_node(int node)
 {
+	if (node == NUMA_NO_NODE)
+		return cpu_all_mask;
+
 	return node_to_cpumask_map[node];
 }
 #endif
diff --git a/arch/arm64/mm/numa.c b/arch/arm64/mm/numa.c
index 4decf16597008..53ebb4babf3a7 100644
--- a/arch/arm64/mm/numa.c
+++ b/arch/arm64/mm/numa.c
@@ -46,7 +46,11 @@ EXPORT_SYMBOL(node_to_cpumask_map);
  */
 const struct cpumask *cpumask_of_node(int node)
 {
-	if (WARN_ON(node >= nr_node_ids))
+
+	if (node == NUMA_NO_NODE)
+		return cpu_all_mask;
+
+	if (WARN_ON(node < 0 || node >= nr_node_ids))
 		return cpu_none_mask;
 
 	if (WARN_ON(node_to_cpumask_map[node] == NULL))
-- 
2.25.1

[PATCH AUTOSEL 5.4 44/80] can: flexcan: disable clocks during stop mode

[Sasha Levin]

From: Joakim Zhang <qiangqing.zhang@nxp.com>

[ Upstream commit 02f71c6605e1f8259c07f16178330db766189a74 ]

Disable clocks while CAN core is in stop mode.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Tested-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20191210085721.9853-2-qiangqing.zhang@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/can/flexcan.c | 30 ++++++++++++++++++++----------
 1 file changed, 20 insertions(+), 10 deletions(-)

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index e5c207ad3c77d..ae05ed57211df 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -1681,8 +1681,6 @@ static int __maybe_unused flexcan_suspend(struct device *device)
 			err = flexcan_chip_disable(priv);
 			if (err)
 				return err;
-
-			err = pm_runtime_force_suspend(device);
 		}
 		netif_stop_queue(dev);
 		netif_device_detach(dev);
@@ -1708,10 +1706,6 @@ static int __maybe_unused flexcan_resume(struct device *device)
 			if (err)
 				return err;
 		} else {
-			err = pm_runtime_force_resume(device);
-			if (err)
-				return err;
-
 			err = flexcan_chip_enable(priv);
 		}
 	}
@@ -1742,8 +1736,16 @@ static int __maybe_unused flexcan_noirq_suspend(struct device *device)
 	struct net_device *dev = dev_get_drvdata(device);
 	struct flexcan_priv *priv = netdev_priv(dev);
 
-	if (netif_running(dev) && device_may_wakeup(device))
-		flexcan_enable_wakeup_irq(priv, true);
+	if (netif_running(dev)) {
+		int err;
+
+		if (device_may_wakeup(device))
+			flexcan_enable_wakeup_irq(priv, true);
+
+		err = pm_runtime_force_suspend(device);
+		if (err)
+			return err;
+	}
 
 	return 0;
 }
@@ -1753,8 +1755,16 @@ static int __maybe_unused flexcan_noirq_resume(struct device *device)
 	struct net_device *dev = dev_get_drvdata(device);
 	struct flexcan_priv *priv = netdev_priv(dev);
 
-	if (netif_running(dev) && device_may_wakeup(device))
-		flexcan_enable_wakeup_irq(priv, false);
+	if (netif_running(dev)) {
+		int err;
+
+		err = pm_runtime_force_resume(device);
+		if (err)
+			return err;
+
+		if (device_may_wakeup(device))
+			flexcan_enable_wakeup_irq(priv, false);
+	}
 
 	return 0;
 }
-- 
2.25.1

[PATCH AUTOSEL 5.4 45/80] xfs: don't free rt blocks when we're doing a REMAP bunmapi call

[Sasha Levin]

From: "Darrick J. Wong" <darrick.wong@oracle.com>

[ Upstream commit 8df0fa39bdd86ca81a8d706a6ed9d33cc65ca625 ]

When callers pass XFS_BMAPI_REMAP into xfs_bunmapi, they want the extent
to be unmapped from the given file fork without the extent being freed.
We do this for non-rt files, but we forgot to do this for realtime
files.  So far this isn't a big deal since nobody makes a bunmapi call
to a rt file with the REMAP flag set, but don't leave a logic bomb.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/xfs/libxfs/xfs_bmap.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c
index f8db3fe616df9..c114d24be6193 100644
--- a/fs/xfs/libxfs/xfs_bmap.c
+++ b/fs/xfs/libxfs/xfs_bmap.c
@@ -4985,20 +4985,25 @@ xfs_bmap_del_extent_real(
 
 	flags = XFS_ILOG_CORE;
 	if (whichfork == XFS_DATA_FORK && XFS_IS_REALTIME_INODE(ip)) {
-		xfs_fsblock_t	bno;
 		xfs_filblks_t	len;
 		xfs_extlen_t	mod;
 
-		bno = div_u64_rem(del->br_startblock, mp->m_sb.sb_rextsize,
-				  &mod);
-		ASSERT(mod == 0);
 		len = div_u64_rem(del->br_blockcount, mp->m_sb.sb_rextsize,
 				  &mod);
 		ASSERT(mod == 0);
 
-		error = xfs_rtfree_extent(tp, bno, (xfs_extlen_t)len);
-		if (error)
-			goto done;
+		if (!(bflags & XFS_BMAPI_REMAP)) {
+			xfs_fsblock_t	bno;
+
+			bno = div_u64_rem(del->br_startblock,
+					mp->m_sb.sb_rextsize, &mod);
+			ASSERT(mod == 0);
+
+			error = xfs_rtfree_extent(tp, bno, (xfs_extlen_t)len);
+			if (error)
+				goto done;
+		}
+
 		do_fx = 0;
 		nblks = len * mp->m_sb.sb_rextsize;
 		qfield = XFS_TRANS_DQ_RTBCOUNT;
-- 
2.25.1

[PATCH AUTOSEL 5.4 46/80] ACPI: Add out of bounds and numa_off protections to pxm_to_node()

[Sasha Levin]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

[ Upstream commit 8a3decac087aa897df5af04358c2089e52e70ac4 ]

The function should check the validity of the pxm value before using
it to index the pxm_to_node_map[] array.

Whilst hardening this code may be good in general, the main intent
here is to enable following patches that use this function to replace
acpi_map_pxm_to_node() for non SRAT usecases which should return
NO_NUMA_NODE for PXM entries not matching with those in SRAT.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/numa.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
index eadbf90e65d14..85e01752fbe47 100644
--- a/drivers/acpi/numa.c
+++ b/drivers/acpi/numa.c
@@ -31,7 +31,7 @@ int acpi_numa __initdata;
 
 int pxm_to_node(int pxm)
 {
-	if (pxm < 0)
+	if (pxm < 0 || pxm >= MAX_PXM_DOMAINS || numa_off)
 		return NUMA_NO_NODE;
 	return pxm_to_node_map[pxm];
 }
-- 
2.25.1

[PATCH AUTOSEL 5.4 47/80] genirq: Add stub for set_handle_irq() when !GENERIC_IRQ_MULTI_HANDLER

[Sasha Levin]

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit ea0c80d1764449acf2f70fdb25aec33800cd0348 ]

In order to avoid compilation errors when a driver references set_handle_irq(),
but that the architecture doesn't select GENERIC_IRQ_MULTI_HANDLER,
add a stub function that will just WARN_ON_ONCE() if ever used.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
[maz: commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200924071754.4509-2-thunder.leizhen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/irq.h | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/include/linux/irq.h b/include/linux/irq.h
index e9e69c511ea92..437eb143f9f44 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -1235,6 +1235,12 @@ int __init set_handle_irq(void (*handle_irq)(struct pt_regs *));
  * top-level IRQ handler.
  */
 extern void (*handle_arch_irq)(struct pt_regs *) __ro_after_init;
+#else
+#define set_handle_irq(handle_irq)		\
+	do {					\
+		(void)handle_irq;		\
+		WARN_ON(1);			\
+	} while (0)
 #endif
 
 #endif /* _LINUX_IRQ_H */
-- 
2.25.1

[PATCH AUTOSEL 5.4 48/80] dm: change max_io_len() to use blk_max_size_offset()

[Sasha Levin]

From: Mike Snitzer <snitzer@redhat.com>

[ Upstream commit 5091cdec56faeaefa79de4b6cb3c3c55e50d1ac3 ]

Using blk_max_size_offset() enables DM core's splitting to impose
ti->max_io_len (via q->limits.chunk_sectors) and also fallback to
respecting q->limits.max_sectors if chunk_sectors isn't set.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm.c | 20 ++++++++------------
 1 file changed, 8 insertions(+), 12 deletions(-)

diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 667db23f10ee1..eed2337934eba 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1027,22 +1027,18 @@ static sector_t max_io_len_target_boundary(sector_t sector, struct dm_target *ti
 static sector_t max_io_len(sector_t sector, struct dm_target *ti)
 {
 	sector_t len = max_io_len_target_boundary(sector, ti);
-	sector_t offset, max_len;
+	sector_t max_len;
 
 	/*
 	 * Does the target need to split even further?
+	 * - q->limits.chunk_sectors reflects ti->max_io_len so
+	 *   blk_max_size_offset() provides required splitting.
+	 * - blk_max_size_offset() also respects q->limits.max_sectors
 	 */
-	if (ti->max_io_len) {
-		offset = dm_target_offset(ti, sector);
-		if (unlikely(ti->max_io_len & (ti->max_io_len - 1)))
-			max_len = sector_div(offset, ti->max_io_len);
-		else
-			max_len = offset & (ti->max_io_len - 1);
-		max_len = ti->max_io_len - max_len;
-
-		if (len > max_len)
-			len = max_len;
-	}
+	max_len = blk_max_size_offset(dm_table_get_md(ti->table)->queue,
+				      dm_target_offset(ti, sector));
+	if (len > max_len)
+		len = max_len;
 
 	return len;
 }
-- 
2.25.1

[PATCH AUTOSEL 5.4 49/80] brcmfmac: Fix warning message after dongle setup failed

[Sasha Levin]

From: Wright Feng <wright.feng@cypress.com>

[ Upstream commit 6aa5a83a7ed8036c1388a811eb8bdfa77b21f19c ]

Brcmfmac showed warning message in fweh.c when checking the size of event
queue which is not initialized. Therefore, we only cancel the worker and
reset event handler only when it is initialized.

[  145.505899] brcmfmac 0000:02:00.0: brcmf_pcie_setup: Dongle setup
[  145.929970] ------------[ cut here ]------------
[  145.929994] WARNING: CPU: 0 PID: 288 at drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c:312
brcmf_fweh_detach+0xbc/0xd0 [brcmfmac]
...
[  145.930029] Call Trace:
[  145.930036]  brcmf_detach+0x77/0x100 [brcmfmac]
[  145.930043]  brcmf_pcie_remove+0x79/0x130 [brcmfmac]
[  145.930046]  pci_device_remove+0x39/0xc0
[  145.930048]  device_release_driver_internal+0x141/0x200
[  145.930049]  device_release_driver+0x12/0x20
[  145.930054]  brcmf_pcie_setup+0x101/0x3c0 [brcmfmac]
[  145.930060]  brcmf_fw_request_done+0x11d/0x1f0 [brcmfmac]
[  145.930062]  ? lock_timer_base+0x7d/0xa0
[  145.930063]  ? internal_add_timer+0x1f/0xa0
[  145.930064]  ? add_timer+0x11a/0x1d0
[  145.930066]  ? __kmalloc_track_caller+0x18c/0x230
[  145.930068]  ? kstrdup_const+0x23/0x30
[  145.930069]  ? add_dr+0x46/0x80
[  145.930070]  ? devres_add+0x3f/0x50
[  145.930072]  ? usermodehelper_read_unlock+0x15/0x20
[  145.930073]  ? _request_firmware+0x288/0xa20
[  145.930075]  request_firmware_work_func+0x36/0x60
[  145.930077]  process_one_work+0x144/0x360
[  145.930078]  worker_thread+0x4d/0x3c0
[  145.930079]  kthread+0x112/0x150
[  145.930080]  ? rescuer_thread+0x340/0x340
[  145.930081]  ? kthread_park+0x60/0x60
[  145.930083]  ret_from_fork+0x25/0x30

Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200928054922.44580-3-wright.feng@cypress.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/broadcom/brcm80211/brcmfmac/fweh.c    | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
index 79c8a858b6d6f..a30fcfbf2ee7c 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
@@ -304,10 +304,12 @@ void brcmf_fweh_detach(struct brcmf_pub *drvr)
 {
 	struct brcmf_fweh_info *fweh = &drvr->fweh;
 
-	/* cancel the worker */
-	cancel_work_sync(&fweh->event_work);
-	WARN_ON(!list_empty(&fweh->event_q));
-	memset(fweh->evt_handler, 0, sizeof(fweh->evt_handler));
+	/* cancel the worker if initialized */
+	if (fweh->event_work.func) {
+		cancel_work_sync(&fweh->event_work);
+		WARN_ON(!list_empty(&fweh->event_q));
+		memset(fweh->evt_handler, 0, sizeof(fweh->evt_handler));
+	}
 }
 
 /**
-- 
2.25.1

[PATCH AUTOSEL 5.4 50/80] drivers/net/wan/hdlc_fr: Correctly handle special skb->protocol values

[Sasha Levin]

From: Xie He <xie.he.0141@gmail.com>

[ Upstream commit 8306266c1d51aac9aa7aa907fe99032a58c6382c ]

The fr_hard_header function is used to prepend the header to skbs before
transmission. It is used in 3 situations:
1) When a control packet is generated internally in this driver;
2) When a user sends an skb on an Ethernet-emulating PVC device;
3) When a user sends an skb on a normal PVC device.

These 3 situations need to be handled differently by fr_hard_header.
Different headers should be prepended to the skb in different situations.

Currently fr_hard_header distinguishes these 3 situations using
skb->protocol. For situation 1 and 2, a special skb->protocol value
will be assigned before calling fr_hard_header, so that it can recognize
these 2 situations. All skb->protocol values other than these special ones
are treated by fr_hard_header as situation 3.

However, it is possible that in situation 3, the user sends an skb with
one of the special skb->protocol values. In this case, fr_hard_header
would incorrectly treat it as situation 1 or 2.

This patch tries to solve this issue by using skb->dev instead of
skb->protocol to distinguish between these 3 situations. For situation
1, skb->dev would be NULL; for situation 2, skb->dev->type would be
ARPHRD_ETHER; and for situation 3, skb->dev->type would be ARPHRD_DLCI.

This way fr_hard_header would be able to distinguish these 3 situations
correctly regardless what skb->protocol value the user tries to use in
situation 3.

Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wan/hdlc_fr.c | 98 ++++++++++++++++++++-------------------
 1 file changed, 51 insertions(+), 47 deletions(-)

diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c
index d6cfd51613ed8..3a44dad87602d 100644
--- a/drivers/net/wan/hdlc_fr.c
+++ b/drivers/net/wan/hdlc_fr.c
@@ -273,63 +273,69 @@ static inline struct net_device **get_dev_p(struct pvc_device *pvc,
 
 static int fr_hard_header(struct sk_buff **skb_p, u16 dlci)
 {
-	u16 head_len;
 	struct sk_buff *skb = *skb_p;
 
-	switch (skb->protocol) {
-	case cpu_to_be16(NLPID_CCITT_ANSI_LMI):
-		head_len = 4;
-		skb_push(skb, head_len);
-		skb->data[3] = NLPID_CCITT_ANSI_LMI;
-		break;
-
-	case cpu_to_be16(NLPID_CISCO_LMI):
-		head_len = 4;
-		skb_push(skb, head_len);
-		skb->data[3] = NLPID_CISCO_LMI;
-		break;
-
-	case cpu_to_be16(ETH_P_IP):
-		head_len = 4;
-		skb_push(skb, head_len);
-		skb->data[3] = NLPID_IP;
-		break;
-
-	case cpu_to_be16(ETH_P_IPV6):
-		head_len = 4;
-		skb_push(skb, head_len);
-		skb->data[3] = NLPID_IPV6;
-		break;
-
-	case cpu_to_be16(ETH_P_802_3):
-		head_len = 10;
-		if (skb_headroom(skb) < head_len) {
-			struct sk_buff *skb2 = skb_realloc_headroom(skb,
-								    head_len);
+	if (!skb->dev) { /* Control packets */
+		switch (dlci) {
+		case LMI_CCITT_ANSI_DLCI:
+			skb_push(skb, 4);
+			skb->data[3] = NLPID_CCITT_ANSI_LMI;
+			break;
+
+		case LMI_CISCO_DLCI:
+			skb_push(skb, 4);
+			skb->data[3] = NLPID_CISCO_LMI;
+			break;
+
+		default:
+			return -EINVAL;
+		}
+
+	} else if (skb->dev->type == ARPHRD_DLCI) {
+		switch (skb->protocol) {
+		case htons(ETH_P_IP):
+			skb_push(skb, 4);
+			skb->data[3] = NLPID_IP;
+			break;
+
+		case htons(ETH_P_IPV6):
+			skb_push(skb, 4);
+			skb->data[3] = NLPID_IPV6;
+			break;
+
+		default:
+			skb_push(skb, 10);
+			skb->data[3] = FR_PAD;
+			skb->data[4] = NLPID_SNAP;
+			/* OUI 00-00-00 indicates an Ethertype follows */
+			skb->data[5] = 0x00;
+			skb->data[6] = 0x00;
+			skb->data[7] = 0x00;
+			/* This should be an Ethertype: */
+			*(__be16 *)(skb->data + 8) = skb->protocol;
+		}
+
+	} else if (skb->dev->type == ARPHRD_ETHER) {
+		if (skb_headroom(skb) < 10) {
+			struct sk_buff *skb2 = skb_realloc_headroom(skb, 10);
 			if (!skb2)
 				return -ENOBUFS;
 			dev_kfree_skb(skb);
 			skb = *skb_p = skb2;
 		}
-		skb_push(skb, head_len);
+		skb_push(skb, 10);
 		skb->data[3] = FR_PAD;
 		skb->data[4] = NLPID_SNAP;
-		skb->data[5] = FR_PAD;
+		/* OUI 00-80-C2 stands for the 802.1 organization */
+		skb->data[5] = 0x00;
 		skb->data[6] = 0x80;
 		skb->data[7] = 0xC2;
+		/* PID 00-07 stands for Ethernet frames without FCS */
 		skb->data[8] = 0x00;
-		skb->data[9] = 0x07; /* bridged Ethernet frame w/out FCS */
-		break;
+		skb->data[9] = 0x07;
 
-	default:
-		head_len = 10;
-		skb_push(skb, head_len);
-		skb->data[3] = FR_PAD;
-		skb->data[4] = NLPID_SNAP;
-		skb->data[5] = FR_PAD;
-		skb->data[6] = FR_PAD;
-		skb->data[7] = FR_PAD;
-		*(__be16*)(skb->data + 8) = skb->protocol;
+	} else {
+		return -EINVAL;
 	}
 
 	dlci_to_q922(skb->data, dlci);
@@ -425,8 +431,8 @@ static netdev_tx_t pvc_xmit(struct sk_buff *skb, struct net_device *dev)
 				skb_put(skb, pad);
 				memset(skb->data + len, 0, pad);
 			}
-			skb->protocol = cpu_to_be16(ETH_P_802_3);
 		}
+		skb->dev = dev;
 		if (!fr_hard_header(&skb, pvc->dlci)) {
 			dev->stats.tx_bytes += skb->len;
 			dev->stats.tx_packets++;
@@ -494,10 +500,8 @@ static void fr_lmi_send(struct net_device *dev, int fullrep)
 	memset(skb->data, 0, len);
 	skb_reserve(skb, 4);
 	if (lmi == LMI_CISCO) {
-		skb->protocol = cpu_to_be16(NLPID_CISCO_LMI);
 		fr_hard_header(&skb, LMI_CISCO_DLCI);
 	} else {
-		skb->protocol = cpu_to_be16(NLPID_CCITT_ANSI_LMI);
 		fr_hard_header(&skb, LMI_CCITT_ANSI_DLCI);
 	}
 	data = skb_tail_pointer(skb);
-- 
2.25.1

[PATCH AUTOSEL 5.4 51/80] bus/fsl_mc: Do not rely on caller to provide non NULL mc_io

[Sasha Levin]

From: Diana Craciun <diana.craciun@oss.nxp.com>

[ Upstream commit 5026cf605143e764e1785bbf9158559d17f8d260 ]

Before destroying the mc_io, check first that it was
allocated.

Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Acked-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Diana Craciun <diana.craciun@oss.nxp.com>
Link: https://lore.kernel.org/r/20200929085441.17448-11-diana.craciun@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/bus/fsl-mc/mc-io.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/bus/fsl-mc/mc-io.c b/drivers/bus/fsl-mc/mc-io.c
index d9629fc13a155..0a4a387b615d5 100644
--- a/drivers/bus/fsl-mc/mc-io.c
+++ b/drivers/bus/fsl-mc/mc-io.c
@@ -129,7 +129,12 @@ int __must_check fsl_create_mc_io(struct device *dev,
  */
 void fsl_destroy_mc_io(struct fsl_mc_io *mc_io)
 {
-	struct fsl_mc_device *dpmcp_dev = mc_io->dpmcp_dev;
+	struct fsl_mc_device *dpmcp_dev;
+
+	if (!mc_io)
+		return;
+
+	dpmcp_dev = mc_io->dpmcp_dev;
 
 	if (dpmcp_dev)
 		fsl_mc_io_unset_dpmcp(mc_io);
-- 
2.25.1

[PATCH AUTOSEL 5.4 52/80] ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3

[Sasha Levin]

From: Jonathan Cameron <Jonathan.Cameron@huawei.com>

[ Upstream commit 2c5b9bde95c96942f2873cea6ef383c02800e4a8 ]

In ACPI 6.3, the Memory Proximity Domain Attributes Structure
changed substantially.  One of those changes was that the flag
for "Memory Proximity Domain field is valid" was deprecated.

This was because the field "Proximity Domain for the Memory"
became a required field and hence having a validity flag makes
no sense.

So the correct logic is to always assume the field is there.
Current code assumes it never is.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/hmat/hmat.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/acpi/hmat/hmat.c b/drivers/acpi/hmat/hmat.c
index 8b0de8a3c6470..0f1c939b7e901 100644
--- a/drivers/acpi/hmat/hmat.c
+++ b/drivers/acpi/hmat/hmat.c
@@ -403,7 +403,8 @@ static int __init hmat_parse_proximity_domain(union acpi_subtable_headers *heade
 		pr_info("HMAT: Memory Flags:%04x Processor Domain:%d Memory Domain:%d\n",
 			p->flags, p->processor_PD, p->memory_PD);
 
-	if (p->flags & ACPI_HMAT_MEMORY_PD_VALID && hmat_revision == 1) {
+	if ((hmat_revision == 1 && p->flags & ACPI_HMAT_MEMORY_PD_VALID) ||
+	    hmat_revision > 1) {
 		target = find_mem_target(p->memory_PD);
 		if (!target) {
 			pr_debug("HMAT: Memory Domain missing from SRAT\n");
-- 
2.25.1

[PATCH AUTOSEL 5.4 53/80] power: supply: test_power: add missing newlines when printing parameters by sysfs

[Sasha Levin]

From: Xiongfeng Wang <wangxiongfeng2@huawei.com>

[ Upstream commit c07fa6c1631333f02750cf59f22b615d768b4d8f ]

When I cat some module parameters by sysfs, it displays as follows.
It's better to add a newline for easy reading.

root@syzkaller:~# cd /sys/module/test_power/parameters/
root@syzkaller:/sys/module/test_power/parameters# cat ac_online
onroot@syzkaller:/sys/module/test_power/parameters# cat battery_present
trueroot@syzkaller:/sys/module/test_power/parameters# cat battery_health
goodroot@syzkaller:/sys/module/test_power/parameters# cat battery_status
dischargingroot@syzkaller:/sys/module/test_power/parameters# cat battery_technology
LIONroot@syzkaller:/sys/module/test_power/parameters# cat usb_online
onroot@syzkaller:/sys/module/test_power/parameters#

Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/test_power.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/power/supply/test_power.c b/drivers/power/supply/test_power.c
index c3cad2b6dabae..1139ca7251952 100644
--- a/drivers/power/supply/test_power.c
+++ b/drivers/power/supply/test_power.c
@@ -341,6 +341,7 @@ static int param_set_ac_online(const char *key, const struct kernel_param *kp)
 static int param_get_ac_online(char *buffer, const struct kernel_param *kp)
 {
 	strcpy(buffer, map_get_key(map_ac_online, ac_online, "unknown"));
+	strcat(buffer, "\n");
 	return strlen(buffer);
 }
 
@@ -354,6 +355,7 @@ static int param_set_usb_online(const char *key, const struct kernel_param *kp)
 static int param_get_usb_online(char *buffer, const struct kernel_param *kp)
 {
 	strcpy(buffer, map_get_key(map_ac_online, usb_online, "unknown"));
+	strcat(buffer, "\n");
 	return strlen(buffer);
 }
 
@@ -368,6 +370,7 @@ static int param_set_battery_status(const char *key,
 static int param_get_battery_status(char *buffer, const struct kernel_param *kp)
 {
 	strcpy(buffer, map_get_key(map_status, battery_status, "unknown"));
+	strcat(buffer, "\n");
 	return strlen(buffer);
 }
 
@@ -382,6 +385,7 @@ static int param_set_battery_health(const char *key,
 static int param_get_battery_health(char *buffer, const struct kernel_param *kp)
 {
 	strcpy(buffer, map_get_key(map_health, battery_health, "unknown"));
+	strcat(buffer, "\n");
 	return strlen(buffer);
 }
 
@@ -397,6 +401,7 @@ static int param_get_battery_present(char *buffer,
 					const struct kernel_param *kp)
 {
 	strcpy(buffer, map_get_key(map_present, battery_present, "unknown"));
+	strcat(buffer, "\n");
 	return strlen(buffer);
 }
 
@@ -414,6 +419,7 @@ static int param_get_battery_technology(char *buffer,
 {
 	strcpy(buffer,
 		map_get_key(map_technology, battery_technology, "unknown"));
+	strcat(buffer, "\n");
 	return strlen(buffer);
 }
 
-- 
2.25.1

[PATCH AUTOSEL 5.4 54/80] drm/amd/display: HDMI remote sink need mode validation for Linux

[Sasha Levin]

From: Fangzhi Zuo <Jerry.Zuo@amd.com>

[ Upstream commit 95d620adb48f7728e67d82f56f756e8d451cf8d2 ]

[Why]
Currently mode validation is bypassed if remote sink exists. That
leads to mode set issue when a BW bottle neck exists in the link path,
e.g., a DP-to-HDMI converter that only supports HDMI 1.4.

Any invalid mode passed to Linux user space will cause the modeset
failure due to limitation of Linux user space implementation.

[How]
Mode validation is skipped only if in edid override. For real remote
sink, clock limit check should be done for HDMI remote sink.

Have HDMI related remote sink going through mode validation to
elimiate modes which pixel clock exceeds BW limitation.

Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 3efee7b3378a3..47cefc05fd3f5 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -2268,7 +2268,7 @@ enum dc_status dc_link_validate_mode_timing(
 	/* A hack to avoid failing any modes for EDID override feature on
 	 * topology change such as lower quality cable for DP or different dongle
 	 */
-	if (link->remote_sinks[0])
+	if (link->remote_sinks[0] && link->remote_sinks[0]->sink_signal == SIGNAL_TYPE_VIRTUAL)
 		return DC_OK;
 
 	/* Passive Dongle */
-- 
2.25.1

[PATCH AUTOSEL 5.4 55/80] ARC: [dts] fix the errors detected by dtbs_check

[Sasha Levin]

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit 05b1be68c4d6d76970025e6139bfd735c2256ee5 ]

xxx/arc/boot/dts/axs101.dt.yaml: dw-apb-ictl@e0012000: $nodename:0: \
'dw-apb-ictl@e0012000' does not match '^interrupt-controller(@[0-9a-f,]+)*$'
 From schema: xxx/interrupt-controller/snps,dw-apb-ictl.yaml

The node name of the interrupt controller must start with
"interrupt-controller" instead of "dw-apb-ictl".

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/boot/dts/axc001.dtsi         | 2 +-
 arch/arc/boot/dts/axc003.dtsi         | 2 +-
 arch/arc/boot/dts/axc003_idu.dtsi     | 2 +-
 arch/arc/boot/dts/vdk_axc003.dtsi     | 2 +-
 arch/arc/boot/dts/vdk_axc003_idu.dtsi | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi
index 6ec1fcdfc0d7f..92247288d0562 100644
--- a/arch/arc/boot/dts/axc001.dtsi
+++ b/arch/arc/boot/dts/axc001.dtsi
@@ -85,7 +85,7 @@ arcpct0: pct {
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;
diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi
index ac8e1b463a709..cd1edcf4f95ef 100644
--- a/arch/arc/boot/dts/axc003.dtsi
+++ b/arch/arc/boot/dts/axc003.dtsi
@@ -129,7 +129,7 @@ mmc@15000 {
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;
diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi
index 9da21e7fd246f..70779386ca796 100644
--- a/arch/arc/boot/dts/axc003_idu.dtsi
+++ b/arch/arc/boot/dts/axc003_idu.dtsi
@@ -135,7 +135,7 @@ mmc@15000 {
 	 * avoid duplicating the MB dtsi file given that IRQ from
 	 * this intc to cpu intc are different for axs101 and axs103
 	 */
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0x0 0xe0012000 0x0 0x200 >;
diff --git a/arch/arc/boot/dts/vdk_axc003.dtsi b/arch/arc/boot/dts/vdk_axc003.dtsi
index f8be7ba8dad49..c21d0eb07bf67 100644
--- a/arch/arc/boot/dts/vdk_axc003.dtsi
+++ b/arch/arc/boot/dts/vdk_axc003.dtsi
@@ -46,7 +46,7 @@ debug_uart: dw-apb-uart@5000 {
 
 	};
 
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0xe0012000 0x200 >;
diff --git a/arch/arc/boot/dts/vdk_axc003_idu.dtsi b/arch/arc/boot/dts/vdk_axc003_idu.dtsi
index 0afa3e53a4e39..4d348853ac7c5 100644
--- a/arch/arc/boot/dts/vdk_axc003_idu.dtsi
+++ b/arch/arc/boot/dts/vdk_axc003_idu.dtsi
@@ -54,7 +54,7 @@ debug_uart: dw-apb-uart@5000 {
 
 	};
 
-	mb_intc: dw-apb-ictl@e0012000 {
+	mb_intc: interrupt-controller@e0012000 {
 		#interrupt-cells = <1>;
 		compatible = "snps,dw-apb-ictl";
 		reg = < 0xe0012000 0x200 >;
-- 
2.25.1

[PATCH AUTOSEL 5.4 56/80] btrfs: fix replace of seed device

[Sasha Levin]

From: Anand Jain <anand.jain@oracle.com>

[ Upstream commit c6a5d954950c5031444173ad2195efc163afcac9 ]

If you replace a seed device in a sprouted fs, it appears to have
successfully replaced the seed device, but if you look closely, it
didn't.  Here is an example.

  $ mkfs.btrfs /dev/sda
  $ btrfstune -S1 /dev/sda
  $ mount /dev/sda /btrfs
  $ btrfs device add /dev/sdb /btrfs
  $ umount /btrfs
  $ btrfs device scan --forget
  $ mount -o device=/dev/sda /dev/sdb /btrfs
  $ btrfs replace start -f /dev/sda /dev/sdc /btrfs
  $ echo $?
  0

  BTRFS info (device sdb): dev_replace from /dev/sda (devid 1) to /dev/sdc started
  BTRFS info (device sdb): dev_replace from /dev/sda (devid 1) to /dev/sdc finished

  $ btrfs fi show
  Label: none  uuid: ab2c88b7-be81-4a7e-9849-c3666e7f9f4f
	  Total devices 2 FS bytes used 256.00KiB
	  devid    1 size 3.00GiB used 520.00MiB path /dev/sdc
	  devid    2 size 3.00GiB used 896.00MiB path /dev/sdb

  Label: none  uuid: 10bd3202-0415-43af-96a8-d5409f310a7e
	  Total devices 1 FS bytes used 128.00KiB
	  devid    1 size 3.00GiB used 536.00MiB path /dev/sda

So as per the replace start command and kernel log replace was successful.
Now let's try to clean mount.

  $ umount /btrfs
  $ btrfs device scan --forget

  $ mount -o device=/dev/sdc /dev/sdb /btrfs
  mount: /btrfs: wrong fs type, bad option, bad superblock on /dev/sdb, missing codepage or helper program, or other error.

  [  636.157517] BTRFS error (device sdc): failed to read chunk tree: -2
  [  636.180177] BTRFS error (device sdc): open_ctree failed

That's because per dev items it is still looking for the original seed
device.

 $ btrfs inspect-internal dump-tree -d /dev/sdb

	item 0 key (DEV_ITEMS DEV_ITEM 1) itemoff 16185 itemsize 98
		devid 1 total_bytes 3221225472 bytes_used 545259520
		io_align 4096 io_width 4096 sector_size 4096 type 0
		generation 6 start_offset 0 dev_group 0
		seek_speed 0 bandwidth 0
		uuid 59368f50-9af2-4b17-91da-8a783cc418d4  <--- seed uuid
		fsid 10bd3202-0415-43af-96a8-d5409f310a7e  <--- seed fsid
	item 1 key (DEV_ITEMS DEV_ITEM 2) itemoff 16087 itemsize 98
		devid 2 total_bytes 3221225472 bytes_used 939524096
		io_align 4096 io_width 4096 sector_size 4096 type 0
		generation 0 start_offset 0 dev_group 0
		seek_speed 0 bandwidth 0
		uuid 56a0a6bc-4630-4998-8daf-3c3030c4256a  <- sprout uuid
		fsid ab2c88b7-be81-4a7e-9849-c3666e7f9f4f <- sprout fsid

But the replaced target has the following uuid+fsid in its superblock
which doesn't match with the expected uuid+fsid in its devitem.

  $ btrfs in dump-super /dev/sdc | egrep '^generation|dev_item.uuid|dev_item.fsid|devid'
  generation	20
  dev_item.uuid	59368f50-9af2-4b17-91da-8a783cc418d4
  dev_item.fsid	ab2c88b7-be81-4a7e-9849-c3666e7f9f4f [match]
  dev_item.devid	1

So if you provide the original seed device the mount shall be
successful.  Which so long happening in the test case btrfs/163.

  $ btrfs device scan --forget
  $ mount -o device=/dev/sda /dev/sdb /btrfs

Fix in this patch:
If a seed is not sprouted then there is no replacement of it, because of
its read-only filesystem with a read-only device. Similarly, in the case
of a sprouted filesystem, the seed device is still read only. So, mark
it as you can't replace a seed device, you can only add a new device and
then delete the seed device. If replace is attempted then returns
-EINVAL.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/dev-replace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/btrfs/dev-replace.c b/fs/btrfs/dev-replace.c
index 196bd241e701a..34ddf2d75c1af 100644
--- a/fs/btrfs/dev-replace.c
+++ b/fs/btrfs/dev-replace.c
@@ -190,7 +190,7 @@ static int btrfs_init_dev_replace_tgtdev(struct btrfs_fs_info *fs_info,
 	int ret = 0;
 
 	*device_out = NULL;
-	if (fs_info->fs_devices->seeding) {
+	if (srcdev->fs_devices->seeding) {
 		btrfs_err(fs_info, "the filesystem is a seed filesystem!");
 		return -EINVAL;
 	}
-- 
2.25.1

[PATCH AUTOSEL 5.4 57/80] md/bitmap: md_bitmap_get_counter returns wrong blocks

[Sasha Levin]

From: Zhao Heming <heming.zhao@suse.com>

[ Upstream commit d837f7277f56e70d82b3a4a037d744854e62f387 ]

md_bitmap_get_counter() has code:

```
    if (bitmap->bp[page].hijacked ||
        bitmap->bp[page].map == NULL)
        csize = ((sector_t)1) << (bitmap->chunkshift +
                      PAGE_COUNTER_SHIFT - 1);
```

The minus 1 is wrong, this branch should report 2048 bits of space.
With "-1" action, this only report 1024 bit of space.

This bug code returns wrong blocks, but it doesn't inflence bitmap logic:
1. Most callers focus this function return value (the counter of offset),
   not the parameter blocks.
2. The bug is only triggered when hijacked is true or map is NULL.
   the hijacked true condition is very rare.
   the "map == null" only true when array is creating or resizing.
3. Even the caller gets wrong blocks, current code makes caller just to
   call md_bitmap_get_counter() one more time.

Signed-off-by: Zhao Heming <heming.zhao@suse.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/md-bitmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/md/md-bitmap.c b/drivers/md/md-bitmap.c
index 3ad18246fcb3c..3b6fb1664dbea 100644
--- a/drivers/md/md-bitmap.c
+++ b/drivers/md/md-bitmap.c
@@ -1372,7 +1372,7 @@ __acquires(bitmap->lock)
 	if (bitmap->bp[page].hijacked ||
 	    bitmap->bp[page].map == NULL)
 		csize = ((sector_t)1) << (bitmap->chunkshift +
-					  PAGE_COUNTER_SHIFT - 1);
+					  PAGE_COUNTER_SHIFT);
 	else
 		csize = ((sector_t)1) << bitmap->chunkshift;
 	*blocks = csize - (offset & (csize - 1));
-- 
2.25.1

[PATCH AUTOSEL 5.4 58/80] bnxt_en: Log unknown link speed appropriately.

[Sasha Levin]

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit 8eddb3e7ce124dd6375d3664f1aae13873318b0f ]

If the VF virtual link is set to always enabled, the speed may be
unknown when the physical link is down.  The driver currently logs
the link speed as 4294967295 Mbps which is SPEED_UNKNOWN.  Modify
the link up log message as "speed unknown" which makes more sense.

Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/1602493854-29283-7-git-send-email-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 4f4fd80762610..292fe096139de 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -8384,6 +8384,11 @@ static void bnxt_report_link(struct bnxt *bp)
 		u16 fec;
 
 		netif_carrier_on(bp->dev);
+		speed = bnxt_fw_to_ethtool_speed(bp->link_info.link_speed);
+		if (speed == SPEED_UNKNOWN) {
+			netdev_info(bp->dev, "NIC Link is Up, speed unknown\n");
+			return;
+		}
 		if (bp->link_info.duplex == BNXT_LINK_DUPLEX_FULL)
 			duplex = "full";
 		else
@@ -8396,7 +8401,6 @@ static void bnxt_report_link(struct bnxt *bp)
 			flow_ctrl = "ON - receive";
 		else
 			flow_ctrl = "none";
-		speed = bnxt_fw_to_ethtool_speed(bp->link_info.link_speed);
 		netdev_info(bp->dev, "NIC Link is Up, %u Mbps %s duplex, Flow control: %s\n",
 			    speed, duplex, flow_ctrl);
 		if (bp->flags & BNXT_FLAG_EEE_CAP)
-- 
2.25.1

[PATCH AUTOSEL 5.4 59/80] rpmsg: glink: Use complete_all for open states

[Sasha Levin]

From: Chris Lew <clew@codeaurora.org>

[ Upstream commit 4fcdaf6e28d11e2f3820d54dd23cd12a47ddd44e ]

The open_req and open_ack completion variables are the state variables
to represet a remote channel as open. Use complete_all so there are no
races with waiters and using completion_done.

Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
Link: https://lore.kernel.org/r/1593017121-7953-2-git-send-email-deesin@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rpmsg/qcom_glink_native.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/rpmsg/qcom_glink_native.c b/drivers/rpmsg/qcom_glink_native.c
index 1995f5b3ea677..d5114abcde197 100644
--- a/drivers/rpmsg/qcom_glink_native.c
+++ b/drivers/rpmsg/qcom_glink_native.c
@@ -970,7 +970,7 @@ static int qcom_glink_rx_open_ack(struct qcom_glink *glink, unsigned int lcid)
 		return -EINVAL;
 	}
 
-	complete(&channel->open_ack);
+	complete_all(&channel->open_ack);
 
 	return 0;
 }
@@ -1178,7 +1178,7 @@ static int qcom_glink_announce_create(struct rpmsg_device *rpdev)
 	__be32 *val = defaults;
 	int size;
 
-	if (glink->intentless)
+	if (glink->intentless || !completion_done(&channel->open_ack))
 		return 0;
 
 	prop = of_find_property(np, "qcom,intents", NULL);
@@ -1413,7 +1413,7 @@ static int qcom_glink_rx_open(struct qcom_glink *glink, unsigned int rcid,
 	channel->rcid = ret;
 	spin_unlock_irqrestore(&glink->idr_lock, flags);
 
-	complete(&channel->open_req);
+	complete_all(&channel->open_req);
 
 	if (create_device) {
 		rpdev = kzalloc(sizeof(*rpdev), GFP_KERNEL);
-- 
2.25.1

[PATCH AUTOSEL 5.4 60/80] clk: ti: clockdomain: fix static checker warning

[Sasha Levin]

From: Tero Kristo <t-kristo@ti.com>

[ Upstream commit b7a7943fe291b983b104bcbd2f16e8e896f56590 ]

Fix a memory leak induced by not calling clk_put after doing of_clk_get.

Reported-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20200907082600.454-3-t-kristo@ti.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/ti/clockdomain.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
index 423a99b9f10c7..8d0dea188a284 100644
--- a/drivers/clk/ti/clockdomain.c
+++ b/drivers/clk/ti/clockdomain.c
@@ -146,10 +146,12 @@ static void __init of_ti_clockdomain_setup(struct device_node *node)
 		if (!omap2_clk_is_hw_omap(clk_hw)) {
 			pr_warn("can't setup clkdm for basic clk %s\n",
 				__clk_get_name(clk));
+			clk_put(clk);
 			continue;
 		}
 		to_clk_hw_omap(clk_hw)->clkdm_name = clkdm_name;
 		omap2_init_clk_clkdm(clk_hw);
+		clk_put(clk);
 	}
 }
 
-- 
2.25.1

[PATCH AUTOSEL 5.4 61/80] phy: marvell: comphy: Convert internal SMCC firmware return codes to errno

[Sasha Levin]

From: Pali Rohár <pali@kernel.org>

[ Upstream commit ea17a0f153af2cd890e4ce517130dcccaa428c13 ]

Driver ->power_on and ->power_off callbacks leaks internal SMCC firmware
return codes to phy caller. This patch converts SMCC error codes to
standard linux errno codes. Include file linux/arm-smccc.h already provides
defines for SMCC error codes, so use them instead of custom driver defines.
Note that return value is signed 32bit, but stored in unsigned long type
with zero padding.

Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Link: https://lore.kernel.org/r/20200902144344.16684-2-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 14 +++++++++++---
 drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 14 +++++++++++---
 2 files changed, 22 insertions(+), 6 deletions(-)

diff --git a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
index 1a138be8bd6a0..810f25a476321 100644
--- a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
@@ -26,7 +26,6 @@
 #define COMPHY_SIP_POWER_ON			0x82000001
 #define COMPHY_SIP_POWER_OFF			0x82000002
 #define COMPHY_SIP_PLL_LOCK			0x82000003
-#define COMPHY_FW_NOT_SUPPORTED			(-1)
 
 #define COMPHY_FW_MODE_SATA			0x1
 #define COMPHY_FW_MODE_SGMII			0x2
@@ -112,10 +111,19 @@ static int mvebu_a3700_comphy_smc(unsigned long function, unsigned long lane,
 				  unsigned long mode)
 {
 	struct arm_smccc_res res;
+	s32 ret;
 
 	arm_smccc_smc(function, lane, mode, 0, 0, 0, 0, 0, &res);
+	ret = res.a0;
 
-	return res.a0;
+	switch (ret) {
+	case SMCCC_RET_SUCCESS:
+		return 0;
+	case SMCCC_RET_NOT_SUPPORTED:
+		return -EOPNOTSUPP;
+	default:
+		return -EINVAL;
+	}
 }
 
 static int mvebu_a3700_comphy_get_fw_mode(int lane, int port,
@@ -220,7 +228,7 @@ static int mvebu_a3700_comphy_power_on(struct phy *phy)
 	}
 
 	ret = mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_ON, lane->id, fw_param);
-	if (ret == COMPHY_FW_NOT_SUPPORTED)
+	if (ret == -EOPNOTSUPP)
 		dev_err(lane->dev,
 			"unsupported SMC call, try updating your firmware\n");
 
diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
index e3b87c94aaf69..849351b4805f5 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
@@ -123,7 +123,6 @@
 
 #define COMPHY_SIP_POWER_ON	0x82000001
 #define COMPHY_SIP_POWER_OFF	0x82000002
-#define COMPHY_FW_NOT_SUPPORTED	(-1)
 
 /*
  * A lane is described by the following bitfields:
@@ -273,10 +272,19 @@ static int mvebu_comphy_smc(unsigned long function, unsigned long phys,
 			    unsigned long lane, unsigned long mode)
 {
 	struct arm_smccc_res res;
+	s32 ret;
 
 	arm_smccc_smc(function, phys, lane, mode, 0, 0, 0, 0, &res);
+	ret = res.a0;
 
-	return res.a0;
+	switch (ret) {
+	case SMCCC_RET_SUCCESS:
+		return 0;
+	case SMCCC_RET_NOT_SUPPORTED:
+		return -EOPNOTSUPP;
+	default:
+		return -EINVAL;
+	}
 }
 
 static int mvebu_comphy_get_mode(bool fw_mode, int lane, int port,
@@ -819,7 +827,7 @@ static int mvebu_comphy_power_on(struct phy *phy)
 	if (!ret)
 		return ret;
 
-	if (ret == COMPHY_FW_NOT_SUPPORTED)
+	if (ret == -EOPNOTSUPP)
 		dev_err(priv->dev,
 			"unsupported SMC call, try updating your firmware\n");
 
-- 
2.25.1

[PATCH AUTOSEL 5.4 62/80] asm-generic/io.h: Fix !CONFIG_GENERIC_IOMAP pci_iounmap() implementation

[Sasha Levin]

From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

[ Upstream commit f5810e5c329238b8553ebd98b914bdbefd8e6737 ]

For arches that do not select CONFIG_GENERIC_IOMAP, the current
pci_iounmap() function does nothing causing obvious memory leaks
for mapped regions that are backed by MMIO physical space.

In order to detect if a mapped pointer is IO vs MMIO, a check must made
available to the pci_iounmap() function so that it can actually detect
whether the pointer has to be unmapped.

In configurations where CONFIG_HAS_IOPORT_MAP && !CONFIG_GENERIC_IOMAP,
a mapped port is detected using an ioport_map() stub defined in
asm-generic/io.h.

Use the same logic to implement a stub (ie __pci_ioport_unmap()) that
detects if the passed in pointer in pci_iounmap() is IO vs MMIO to
iounmap conditionally and call it in pci_iounmap() fixing the issue.

Leave __pci_ioport_unmap() as a NOP for all other config options.

Tested-by: George Cherian <george.cherian@marvell.com>
Link: https://lore.kernel.org/lkml/20200905024811.74701-1-yangyingliang@huawei.com
Link: https://lore.kernel.org/lkml/20200824132046.3114383-1-george.cherian@marvell.com
Link: https://lore.kernel.org/r/a9daf8d8444d0ebd00bc6d64e336ec49dbb50784.1600254147.git.lorenzo.pieralisi@arm.com
Reported-by: George Cherian <george.cherian@marvell.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: George Cherian <george.cherian@marvell.com>
Cc: Will Deacon <will@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/asm-generic/io.h | 39 +++++++++++++++++++++++++++------------
 1 file changed, 27 insertions(+), 12 deletions(-)

diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h
index d02806513670c..5e6c4f375e0c3 100644
--- a/include/asm-generic/io.h
+++ b/include/asm-generic/io.h
@@ -887,18 +887,6 @@ static inline void iowrite64_rep(volatile void __iomem *addr,
 #include <linux/vmalloc.h>
 #define __io_virt(x) ((void __force *)(x))
 
-#ifndef CONFIG_GENERIC_IOMAP
-struct pci_dev;
-extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
-
-#ifndef pci_iounmap
-#define pci_iounmap pci_iounmap
-static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p)
-{
-}
-#endif
-#endif /* CONFIG_GENERIC_IOMAP */
-
 /*
  * Change virtual addresses to physical addresses and vv.
  * These are pretty trivial
@@ -1013,6 +1001,16 @@ static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
 	port &= IO_SPACE_LIMIT;
 	return (port > MMIO_UPPER_LIMIT) ? NULL : PCI_IOBASE + port;
 }
+#define __pci_ioport_unmap __pci_ioport_unmap
+static inline void __pci_ioport_unmap(void __iomem *p)
+{
+	uintptr_t start = (uintptr_t) PCI_IOBASE;
+	uintptr_t addr = (uintptr_t) p;
+
+	if (addr >= start && addr < start + IO_SPACE_LIMIT)
+		return;
+	iounmap(p);
+}
 #endif
 
 #ifndef ioport_unmap
@@ -1027,6 +1025,23 @@ extern void ioport_unmap(void __iomem *p);
 #endif /* CONFIG_GENERIC_IOMAP */
 #endif /* CONFIG_HAS_IOPORT_MAP */
 
+#ifndef CONFIG_GENERIC_IOMAP
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+
+#ifndef __pci_ioport_unmap
+static inline void __pci_ioport_unmap(void __iomem *p) {}
+#endif
+
+#ifndef pci_iounmap
+#define pci_iounmap pci_iounmap
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p)
+{
+	__pci_ioport_unmap(p);
+}
+#endif
+#endif /* CONFIG_GENERIC_IOMAP */
+
 /*
  * Convert a virtual cached pointer to an uncached pointer
  */
-- 
2.25.1

[PATCH AUTOSEL 5.4 63/80] net: 9p: initialize sun_server.sun_path to have addr's value only when addr is valid

[Sasha Levin]

From: Anant Thazhemadam <anant.thazhemadam@gmail.com>

[ Upstream commit 7ca1db21ef8e0e6725b4d25deed1ca196f7efb28 ]

In p9_fd_create_unix, checking is performed to see if the addr (passed
as an argument) is NULL or not.
However, no check is performed to see if addr is a valid address, i.e.,
it doesn't entirely consist of only 0's.
The initialization of sun_server.sun_path to be equal to this faulty
addr value leads to an uninitialized variable, as detected by KMSAN.
Checking for this (faulty addr) and returning a negative error number
appropriately, resolves this issue.

Link: http://lkml.kernel.org/r/20201012042404.2508-1-anant.thazhemadam@gmail.com
Reported-by: syzbot+75d51fe5bf4ebe988518@syzkaller.appspotmail.com
Tested-by: syzbot+75d51fe5bf4ebe988518@syzkaller.appspotmail.com
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/9p/trans_fd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index 12ecacf0c55fb..60eb9a2b209be 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -1023,7 +1023,7 @@ p9_fd_create_unix(struct p9_client *client, const char *addr, char *args)
 
 	csocket = NULL;
 
-	if (addr == NULL)
+	if (!addr || !strlen(addr))
 		return -EINVAL;
 
 	if (strlen(addr) >= UNIX_PATH_MAX) {
-- 
2.25.1

[PATCH AUTOSEL 5.4 64/80] drivers: watchdog: rdc321x_wdt: Fix race condition bugs

[Sasha Levin]

From: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>

[ Upstream commit 4b2e7f99cdd314263c9d172bc17193b8b6bba463 ]

In rdc321x_wdt_probe(), rdc321x_wdt_device.queue is initialized
after misc_register(), hence if ioctl is called before its
initialization which can call rdc321x_wdt_start() function,
it will see an uninitialized value of rdc321x_wdt_device.queue,
hence initialize it before misc_register().
Also, rdc321x_wdt_device.default_ticks is accessed in reset()
function called from write callback, thus initialize it before
misc_register().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20200807112902.28764-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/watchdog/rdc321x_wdt.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/watchdog/rdc321x_wdt.c b/drivers/watchdog/rdc321x_wdt.c
index 2e608ae6cbc78..e0efbc5831986 100644
--- a/drivers/watchdog/rdc321x_wdt.c
+++ b/drivers/watchdog/rdc321x_wdt.c
@@ -230,6 +230,8 @@ static int rdc321x_wdt_probe(struct platform_device *pdev)
 
 	rdc321x_wdt_device.sb_pdev = pdata->sb_pdev;
 	rdc321x_wdt_device.base_reg = r->start;
+	rdc321x_wdt_device.queue = 0;
+	rdc321x_wdt_device.default_ticks = ticks;
 
 	err = misc_register(&rdc321x_wdt_misc);
 	if (err < 0) {
@@ -244,14 +246,11 @@ static int rdc321x_wdt_probe(struct platform_device *pdev)
 				rdc321x_wdt_device.base_reg, RDC_WDT_RST);
 
 	init_completion(&rdc321x_wdt_device.stop);
-	rdc321x_wdt_device.queue = 0;
 
 	clear_bit(0, &rdc321x_wdt_device.inuse);
 
 	timer_setup(&rdc321x_wdt_device.timer, rdc321x_wdt_trigger, 0);
 
-	rdc321x_wdt_device.default_ticks = ticks;
-
 	dev_info(&pdev->dev, "watchdog init success\n");
 
 	return 0;
-- 
2.25.1

[PATCH AUTOSEL 5.4 65/80] ext4: Detect already used quota file early

[Sasha Levin]

From: Jan Kara <jack@suse.cz>

[ Upstream commit e0770e91424f694b461141cbc99adf6b23006b60 ]

When we try to use file already used as a quota file again (for the same
or different quota type), strange things can happen. At the very least
lockdep annotations may be wrong but also inode flags may be wrongly set
/ reset. When the file is used for two quota types at once we can even
corrupt the file and likely crash the kernel. Catch all these cases by
checking whether passed file is already used as quota file and bail
early in that case.

This fixes occasional generic/219 failure due to lockdep complaint.

Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20201015110330.28716-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/super.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 4aae7e3e89a12..2603537b1f66b 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -5856,6 +5856,11 @@ static int ext4_quota_on(struct super_block *sb, int type, int format_id,
 	/* Quotafile not on the same filesystem? */
 	if (path->dentry->d_sb != sb)
 		return -EXDEV;
+
+	/* Quota already enabled for this file? */
+	if (IS_NOQUOTA(d_inode(path->dentry)))
+		return -EBUSY;
+
 	/* Journaling quota? */
 	if (EXT4_SB(sb)->s_qf_names[type]) {
 		/* Quotafile not in fs root? */
-- 
2.25.1

[PATCH AUTOSEL 5.4 66/80] PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()

[Sasha Levin]

From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

[ Upstream commit 15b23906347c0af8778d1d4edeea415290342d35 ]

NXP Layerscape (ls1028a, ls2088a), dra7xxx and imx6 platforms are either
programmed or statically configured to forward the error triggered by a
link-down state (eg no connected endpoint device) on the system bus for
PCI configuration transactions; these errors are reported as an SError
at system level, which is fatal.

Enumerating a PCI tree when the PCIe link is down is not sensible
either, so even if the link-up check is racy (link can go down after
map_bus() is called) add a link-up check in map_bus() to prevent issuing
configuration transactions when the link is down.

SError report:

 SError Interrupt on CPU2, code 0xbf000002 -- SError
 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc5-next-20200914-00001-gf965d3ec86fa #67
 Hardware name: LS1046A RDB Board (DT)
 pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--)
 pc : pci_generic_config_read+0x3c/0xe0
 lr : pci_generic_config_read+0x24/0xe0
 sp : ffff80001003b7b0
 x29: ffff80001003b7b0 x28: ffff80001003ba74
 x27: ffff000971d96800 x26: ffff00096e77e0a8
 x25: ffff80001003b874 x24: ffff80001003b924
 x23: 0000000000000004 x22: 0000000000000000
 x21: 0000000000000000 x20: ffff80001003b874
 x19: 0000000000000004 x18: ffffffffffffffff
 x17: 00000000000000c0 x16: fffffe0025981840
 x15: ffffb94c75b69948 x14: 62203a383634203a
 x13: 666e6f635f726568 x12: 202c31203d207265
 x11: 626d756e3e2d7375 x10: 656877202c307830
 x9 : 203d206e66766564 x8 : 0000000000000908
 x7 : 0000000000000908 x6 : ffff800010900000
 x5 : ffff00096e77e080 x4 : 0000000000000000
 x3 : 0000000000000003 x2 : 84fa3440ff7e7000
 x1 : 0000000000000000 x0 : ffff800010034000
 Kernel panic - not syncing: Asynchronous SError Interrupt
 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc5-next-20200914-00001-gf965d3ec86fa #67
 Hardware name: LS1046A RDB Board (DT)
 Call trace:
  dump_backtrace+0x0/0x1c0
  show_stack+0x18/0x28
  dump_stack+0xd8/0x134
  panic+0x180/0x398
  add_taint+0x0/0xb0
  arm64_serror_panic+0x78/0x88
  do_serror+0x68/0x180
  el1_error+0x84/0x100
  pci_generic_config_read+0x3c/0xe0
  dw_pcie_rd_other_conf+0x78/0x110
  pci_bus_read_config_dword+0x88/0xe8
  pci_bus_generic_read_dev_vendor_id+0x30/0x1b0
  pci_bus_read_dev_vendor_id+0x4c/0x78
  pci_scan_single_device+0x80/0x100

Link: https://lore.kernel.org/r/20200916054130.8685-1-Zhiqiang.Hou@nxp.com
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log, remove Fixes tag]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pcie-designware-host.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index fbcb211cceb43..152420b9d729c 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -536,6 +536,17 @@ static int dw_pcie_access_other_conf(struct pcie_port *pp, struct pci_bus *bus,
 	void __iomem *va_cfg_base;
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 
+	/*
+	 * Checking whether the link is up here is a last line of defense
+	 * against platforms that forward errors on the system bus as
+	 * SError upon PCI configuration transactions issued when the link
+	 * is down. This check is racy by definition and does not stop
+	 * the system from triggering an SError if the link goes down
+	 * after this check is performed.
+	 */
+	if (!dw_pcie_link_up(pci))
+		return NULL;
+
 	busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) |
 		 PCIE_ATU_FUNC(PCI_FUNC(devfn));
 
-- 
2.25.1

[PATCH AUTOSEL 5.4 67/80] KVM: PPC: Book3S HV: Do not allocate HPT for a nested guest

[Sasha Levin]

From: Fabiano Rosas <farosas@linux.ibm.com>

[ Upstream commit 05e6295dc7de859c9d56334805485c4d20bebf25 ]

The current nested KVM code does not support HPT guests. This is
informed/enforced in some ways:

- Hosts < P9 will not be able to enable the nested HV feature;

- The nested hypervisor MMU capabilities will not contain
  KVM_CAP_PPC_MMU_HASH_V3;

- QEMU reflects the MMU capabilities in the
  'ibm,arch-vec-5-platform-support' device-tree property;

- The nested guest, at 'prom_parse_mmu_model' ignores the
  'disable_radix' kernel command line option if HPT is not supported;

- The KVM_PPC_CONFIGURE_V3_MMU ioctl will fail if trying to use HPT.

There is, however, still a way to start a HPT guest by using
max-compat-cpu=power8 at the QEMU machine options. This leads to the
guest being set to use hash after QEMU calls the KVM_PPC_ALLOCATE_HTAB
ioctl.

With the guest set to hash, the nested hypervisor goes through the
entry path that has no knowledge of nesting (kvmppc_run_vcpu) and
crashes when it tries to execute an hypervisor-privileged (mtspr
HDEC) instruction at __kvmppc_vcore_entry:

root@L1:~ $ qemu-system-ppc64 -machine pseries,max-cpu-compat=power8 ...

<snip>
[  538.543303] CPU: 83 PID: 25185 Comm: CPU 0/KVM Not tainted 5.9.0-rc4 #1
[  538.543355] NIP:  c00800000753f388 LR: c00800000753f368 CTR: c0000000001e5ec0
[  538.543417] REGS: c0000013e91e33b0 TRAP: 0700   Not tainted  (5.9.0-rc4)
[  538.543470] MSR:  8000000002843033 <SF,VEC,VSX,FP,ME,IR,DR,RI,LE>  CR: 22422882  XER: 20040000
[  538.543546] CFAR: c00800000753f4b0 IRQMASK: 3
               GPR00: c0080000075397a0 c0000013e91e3640 c00800000755e600 0000000080000000
               GPR04: 0000000000000000 c0000013eab19800 c000001394de0000 00000043a054db72
               GPR08: 00000000003b1652 0000000000000000 0000000000000000 c0080000075502e0
               GPR12: c0000000001e5ec0 c0000007ffa74200 c0000013eab19800 0000000000000008
               GPR16: 0000000000000000 c00000139676c6c0 c000000001d23948 c0000013e91e38b8
               GPR20: 0000000000000053 0000000000000000 0000000000000001 0000000000000000
               GPR24: 0000000000000001 0000000000000001 0000000000000000 0000000000000001
               GPR28: 0000000000000001 0000000000000053 c0000013eab19800 0000000000000001
[  538.544067] NIP [c00800000753f388] __kvmppc_vcore_entry+0x90/0x104 [kvm_hv]
[  538.544121] LR [c00800000753f368] __kvmppc_vcore_entry+0x70/0x104 [kvm_hv]
[  538.544173] Call Trace:
[  538.544196] [c0000013e91e3640] [c0000013e91e3680] 0xc0000013e91e3680 (unreliable)
[  538.544260] [c0000013e91e3820] [c0080000075397a0] kvmppc_run_core+0xbc8/0x19d0 [kvm_hv]
[  538.544325] [c0000013e91e39e0] [c00800000753d99c] kvmppc_vcpu_run_hv+0x404/0xc00 [kvm_hv]
[  538.544394] [c0000013e91e3ad0] [c0080000072da4fc] kvmppc_vcpu_run+0x34/0x48 [kvm]
[  538.544472] [c0000013e91e3af0] [c0080000072d61b8] kvm_arch_vcpu_ioctl_run+0x310/0x420 [kvm]
[  538.544539] [c0000013e91e3b80] [c0080000072c7450] kvm_vcpu_ioctl+0x298/0x778 [kvm]
[  538.544605] [c0000013e91e3ce0] [c0000000004b8c2c] sys_ioctl+0x1dc/0xc90
[  538.544662] [c0000013e91e3dc0] [c00000000002f9a4] system_call_exception+0xe4/0x1c0
[  538.544726] [c0000013e91e3e20] [c00000000000d140] system_call_common+0xf0/0x27c
[  538.544787] Instruction dump:
[  538.544821] f86d1098 60000000 60000000 48000099 e8ad0fe8 e8c500a0 e9264140 75290002
[  538.544886] 7d1602a6 7cec42a6 40820008 7d0807b4 <7d164ba6> 7d083a14 f90d10a0 480104fd
[  538.544953] ---[ end trace 74423e2b948c2e0c ]---

This patch makes the KVM_PPC_ALLOCATE_HTAB ioctl fail when running in
the nested hypervisor, causing QEMU to abort.

Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kvm/book3s_hv.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index e2183fed947d4..dd9b19b1f459a 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -5191,6 +5191,12 @@ static long kvm_arch_vm_ioctl_hv(struct file *filp,
 	case KVM_PPC_ALLOCATE_HTAB: {
 		u32 htab_order;
 
+		/* If we're a nested hypervisor, we currently only support radix */
+		if (kvmhv_on_pseries()) {
+			r = -EOPNOTSUPP;
+			break;
+		}
+
 		r = -EFAULT;
 		if (get_user(htab_order, (u32 __user *)argp))
 			break;
-- 
2.25.1

[PATCH AUTOSEL 5.4 68/80] gfs2: use-after-free in sysfs deregistration

[Sasha Levin]

From: Jamie Iles <jamie@nuviainc.com>

[ Upstream commit c2a04b02c060c4858762edce4674d5cba3e5a96f ]

syzkaller found the following splat with CONFIG_DEBUG_KOBJECT_RELEASE=y:

  Read of size 1 at addr ffff000028e896b8 by task kworker/1:2/228

  CPU: 1 PID: 228 Comm: kworker/1:2 Tainted: G S                5.9.0-rc8+ #101
  Hardware name: linux,dummy-virt (DT)
  Workqueue: events kobject_delayed_cleanup
  Call trace:
   dump_backtrace+0x0/0x4d8
   show_stack+0x34/0x48
   dump_stack+0x174/0x1f8
   print_address_description.constprop.0+0x5c/0x550
   kasan_report+0x13c/0x1c0
   __asan_report_load1_noabort+0x34/0x60
   memcmp+0xd0/0xd8
   gfs2_uevent+0xc4/0x188
   kobject_uevent_env+0x54c/0x1240
   kobject_uevent+0x2c/0x40
   __kobject_del+0x190/0x1d8
   kobject_delayed_cleanup+0x2bc/0x3b8
   process_one_work+0x96c/0x18c0
   worker_thread+0x3f0/0xc30
   kthread+0x390/0x498
   ret_from_fork+0x10/0x18

  Allocated by task 1110:
   kasan_save_stack+0x28/0x58
   __kasan_kmalloc.isra.0+0xc8/0xe8
   kasan_kmalloc+0x10/0x20
   kmem_cache_alloc_trace+0x1d8/0x2f0
   alloc_super+0x64/0x8c0
   sget_fc+0x110/0x620
   get_tree_bdev+0x190/0x648
   gfs2_get_tree+0x50/0x228
   vfs_get_tree+0x84/0x2e8
   path_mount+0x1134/0x1da8
   do_mount+0x124/0x138
   __arm64_sys_mount+0x164/0x238
   el0_svc_common.constprop.0+0x15c/0x598
   do_el0_svc+0x60/0x150
   el0_svc+0x34/0xb0
   el0_sync_handler+0xc8/0x5b4
   el0_sync+0x15c/0x180

  Freed by task 228:
   kasan_save_stack+0x28/0x58
   kasan_set_track+0x28/0x40
   kasan_set_free_info+0x24/0x48
   __kasan_slab_free+0x118/0x190
   kasan_slab_free+0x14/0x20
   slab_free_freelist_hook+0x6c/0x210
   kfree+0x13c/0x460

Use the same pattern as f2fs + ext4 where the kobject destruction must
complete before allowing the FS itself to be freed.  This means that we
need an explicit free_sbd in the callers.

Cc: Bob Peterson <rpeterso@redhat.com>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
[Also go to fail_free when init_names fails.]
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/incore.h     |  1 +
 fs/gfs2/ops_fstype.c | 22 +++++-----------------
 fs/gfs2/super.c      |  1 +
 fs/gfs2/sys.c        |  5 ++++-
 4 files changed, 11 insertions(+), 18 deletions(-)

diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index 5f89c515f5bb7..33a6b074209da 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -694,6 +694,7 @@ struct gfs2_sbd {
 	struct super_block *sd_vfs;
 	struct gfs2_pcpu_lkstats __percpu *sd_lkstats;
 	struct kobject sd_kobj;
+	struct completion sd_kobj_unregister;
 	unsigned long sd_flags;	/* SDF_... */
 	struct gfs2_sb_host sd_sb;
 
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index e0c55765b06d2..338666a97fff6 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -1094,26 +1094,14 @@ static int gfs2_fill_super(struct super_block *sb, struct fs_context *fc)
 	}
 
 	error = init_names(sdp, silent);
-	if (error) {
-		/* In this case, we haven't initialized sysfs, so we have to
-		   manually free the sdp. */
-		free_sbd(sdp);
-		sb->s_fs_info = NULL;
-		return error;
-	}
+	if (error)
+		goto fail_free;
 
 	snprintf(sdp->sd_fsname, sizeof(sdp->sd_fsname), "%s", sdp->sd_table_name);
 
 	error = gfs2_sys_fs_add(sdp);
-	/*
-	 * If we hit an error here, gfs2_sys_fs_add will have called function
-	 * kobject_put which causes the sysfs usage count to go to zero, which
-	 * causes sysfs to call function gfs2_sbd_release, which frees sdp.
-	 * Subsequent error paths here will call gfs2_sys_fs_del, which also
-	 * kobject_put to free sdp.
-	 */
 	if (error)
-		return error;
+		goto fail_free;
 
 	gfs2_create_debugfs_file(sdp);
 
@@ -1210,9 +1198,9 @@ static int gfs2_fill_super(struct super_block *sb, struct fs_context *fc)
 	gfs2_lm_unmount(sdp);
 fail_debug:
 	gfs2_delete_debugfs_file(sdp);
-	/* gfs2_sys_fs_del must be the last thing we do, since it causes
-	 * sysfs to call function gfs2_sbd_release, which frees sdp. */
 	gfs2_sys_fs_del(sdp);
+fail_free:
+	free_sbd(sdp);
 	sb->s_fs_info = NULL;
 	return error;
 }
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index 5fa1eec4fb4f5..5935ce5ae5636 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -695,6 +695,7 @@ static void gfs2_put_super(struct super_block *sb)
 
 	/*  At this point, we're through participating in the lockspace  */
 	gfs2_sys_fs_del(sdp);
+	free_sbd(sdp);
 }
 
 /**
diff --git a/fs/gfs2/sys.c b/fs/gfs2/sys.c
index dd15b8e4af2ce..1c6e52dc878e3 100644
--- a/fs/gfs2/sys.c
+++ b/fs/gfs2/sys.c
@@ -302,7 +302,7 @@ static void gfs2_sbd_release(struct kobject *kobj)
 {
 	struct gfs2_sbd *sdp = container_of(kobj, struct gfs2_sbd, sd_kobj);
 
-	free_sbd(sdp);
+	complete(&sdp->sd_kobj_unregister);
 }
 
 static struct kobj_type gfs2_ktype = {
@@ -652,6 +652,7 @@ int gfs2_sys_fs_add(struct gfs2_sbd *sdp)
 	sprintf(ro, "RDONLY=%d", sb_rdonly(sb));
 	sprintf(spectator, "SPECTATOR=%d", sdp->sd_args.ar_spectator ? 1 : 0);
 
+	init_completion(&sdp->sd_kobj_unregister);
 	sdp->sd_kobj.kset = gfs2_kset;
 	error = kobject_init_and_add(&sdp->sd_kobj, &gfs2_ktype, NULL,
 				     "%s", sdp->sd_table_name);
@@ -682,6 +683,7 @@ int gfs2_sys_fs_add(struct gfs2_sbd *sdp)
 fail_reg:
 	fs_err(sdp, "error %d adding sysfs files\n", error);
 	kobject_put(&sdp->sd_kobj);
+	wait_for_completion(&sdp->sd_kobj_unregister);
 	sb->s_fs_info = NULL;
 	return error;
 }
@@ -692,6 +694,7 @@ void gfs2_sys_fs_del(struct gfs2_sbd *sdp)
 	sysfs_remove_group(&sdp->sd_kobj, &tune_group);
 	sysfs_remove_group(&sdp->sd_kobj, &lock_module_group);
 	kobject_put(&sdp->sd_kobj);
+	wait_for_completion(&sdp->sd_kobj_unregister);
 }
 
 static int gfs2_uevent(struct kset *kset, struct kobject *kobj,
-- 
2.25.1

[PATCH AUTOSEL 5.4 69/80] gfs2: add validation checks for size of superblock

[Sasha Levin]

From: Anant Thazhemadam <anant.thazhemadam@gmail.com>

[ Upstream commit 0ddc5154b24c96f20e94d653b0a814438de6032b ]

In gfs2_check_sb(), no validation checks are performed with regards to
the size of the superblock.
syzkaller detected a slab-out-of-bounds bug that was primarily caused
because the block size for a superblock was set to zero.
A valid size for a superblock is a power of 2 between 512 and PAGE_SIZE.
Performing validation checks and ensuring that the size of the superblock
is valid fixes this bug.

Reported-by: syzbot+af90d47a37376844e731@syzkaller.appspotmail.com
Tested-by: syzbot+af90d47a37376844e731@syzkaller.appspotmail.com
Suggested-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
[Minor code reordering.]
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/ops_fstype.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 338666a97fff6..29b27d769860c 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -169,15 +169,19 @@ static int gfs2_check_sb(struct gfs2_sbd *sdp, int silent)
 		return -EINVAL;
 	}
 
-	/*  If format numbers match exactly, we're done.  */
-
-	if (sb->sb_fs_format == GFS2_FORMAT_FS &&
-	    sb->sb_multihost_format == GFS2_FORMAT_MULTI)
-		return 0;
+	if (sb->sb_fs_format != GFS2_FORMAT_FS ||
+	    sb->sb_multihost_format != GFS2_FORMAT_MULTI) {
+		fs_warn(sdp, "Unknown on-disk format, unable to mount\n");
+		return -EINVAL;
+	}
 
-	fs_warn(sdp, "Unknown on-disk format, unable to mount\n");
+	if (sb->sb_bsize < 512 || sb->sb_bsize > PAGE_SIZE ||
+	    (sb->sb_bsize & (sb->sb_bsize - 1))) {
+		pr_warn("Invalid superblock size\n");
+		return -EINVAL;
+	}
 
-	return -EINVAL;
+	return 0;
 }
 
 static void end_bio_io_page(struct bio *bio)
-- 
2.25.1

[PATCH AUTOSEL 5.4 70/80] cifs: handle -EINTR in cifs_setattr

[Sasha Levin]

From: Ronnie Sahlberg <lsahlber@redhat.com>

[ Upstream commit c6cc4c5a72505a0ecefc9b413f16bec512f38078 ]

RHBZ: 1848178

Some calls that set attributes, like utimensat(), are not supposed to return
-EINTR and thus do not have handlers for this in glibc which causes us
to leak -EINTR to the applications which are also unprepared to handle it.

For example tar will break if utimensat() return -EINTR and abort unpacking
the archive. Other applications may break too.

To handle this we add checks, and retry, for -EINTR in cifs_setattr()

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/inode.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 17df90b5f57a2..fd9e289f3e72a 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -2614,13 +2614,18 @@ cifs_setattr(struct dentry *direntry, struct iattr *attrs)
 {
 	struct cifs_sb_info *cifs_sb = CIFS_SB(direntry->d_sb);
 	struct cifs_tcon *pTcon = cifs_sb_master_tcon(cifs_sb);
+	int rc, retries = 0;
 
-	if (pTcon->unix_ext)
-		return cifs_setattr_unix(direntry, attrs);
-
-	return cifs_setattr_nounix(direntry, attrs);
+	do {
+		if (pTcon->unix_ext)
+			rc = cifs_setattr_unix(direntry, attrs);
+		else
+			rc = cifs_setattr_nounix(direntry, attrs);
+		retries++;
+	} while (is_retryable_error(rc) && retries < 2);
 
 	/* BB: add cifs_setattr_legacy for really old servers */
+	return rc;
 }
 
 #if 0
-- 
2.25.1

[PATCH AUTOSEL 5.4 71/80] arm64: dts: renesas: ulcb: add full-pwr-cycle-in-suspend into eMMC nodes

[Sasha Levin]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

[ Upstream commit 992d7a8b88c83c05664b649fc54501ce58e19132 ]

Add full-pwr-cycle-in-suspend property to do a graceful shutdown of
the eMMC device in system suspend.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1594989201-24228-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/renesas/ulcb.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index 3ef89171538ff..d8fccf3d4987a 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -470,6 +470,7 @@ &sdhi2 {
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	non-removable;
+	full-pwr-cycle-in-suspend;
 	status = "okay";
 };
 
-- 
2.25.1

[PATCH AUTOSEL 5.4 72/80] ARM: dts: omap4: Fix sgx clock rate for 4430

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 19d3e9a0bdd57b90175f30390edeb06851f5f9f3 ]

We currently have a different clock rate for droid4 compared to the
stock v3.0.8 based Android Linux kernel:

# cat /sys/kernel/debug/clk/dpll_*_m7x2_ck/clk_rate
266666667
307200000
# cat /sys/kernel/debug/clk/l3_gfx_cm:clk:0000:0/clk_rate
307200000

Let's fix this by configuring sgx to use 153.6 MHz instead of 307.2 MHz.
Looks like also at least duover needs this change to avoid hangs, so
let's apply it for all 4430.

This helps a bit with thermal issues that seem to be related to memory
corruption when using sgx. It seems that other driver related issues
still remain though.

Cc: Arthur Demchenkov <spinal.by@gmail.com>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap4.dtsi    |  2 +-
 arch/arm/boot/dts/omap443x.dtsi | 10 ++++++++++
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index e5506ab669fc6..904852006b9b1 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -328,7 +328,7 @@ abb_iva: regulator-abb-iva {
 			status = "disabled";
 		};
 
-		target-module@56000000 {
+		sgx_module: target-module@56000000 {
 			compatible = "ti,sysc-omap4", "ti,sysc";
 			reg = <0x5600fe00 0x4>,
 			      <0x5600fe10 0x4>;
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index cbcdcb4e7d1c2..86b9caf461dfa 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -74,3 +74,13 @@ &cpu_thermal {
 };
 
 /include/ "omap443x-clocks.dtsi"
+
+/*
+ * Use dpll_per for sgx at 153.6MHz like droid4 stock v3.0.8 Android kernel
+ */
+&sgx_module {
+	assigned-clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 24>,
+			  <&dpll_per_m7x2_ck>;
+	assigned-clock-rates = <0>, <153600000>;
+	assigned-clock-parents = <&dpll_per_m7x2_ck>;
+};
-- 
2.25.1

[PATCH AUTOSEL 5.4 73/80] memory: emif: Remove bogus debugfs error handling

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit fd22781648080cc400772b3c68aa6b059d2d5420 ]

Callers are generally not supposed to check the return values from
debugfs functions.  Debugfs functions never return NULL so this error
handling will never trigger.  (Historically debugfs functions used to
return a mix of NULL and error pointers but it was eventually deemed too
complicated for something which wasn't intended to be used in normal
situations).

Delete all the error handling.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Link: https://lore.kernel.org/r/20200826113759.GF393664@mwanda
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/memory/emif.c | 33 +++++----------------------------
 1 file changed, 5 insertions(+), 28 deletions(-)

diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c
index 402c6bc8e621d..af296b6fcbbdc 100644
--- a/drivers/memory/emif.c
+++ b/drivers/memory/emif.c
@@ -163,35 +163,12 @@ static const struct file_operations emif_mr4_fops = {
 
 static int __init_or_module emif_debugfs_init(struct emif_data *emif)
 {
-	struct dentry	*dentry;
-	int		ret;
-
-	dentry = debugfs_create_dir(dev_name(emif->dev), NULL);
-	if (!dentry) {
-		ret = -ENOMEM;
-		goto err0;
-	}
-	emif->debugfs_root = dentry;
-
-	dentry = debugfs_create_file("regcache_dump", S_IRUGO,
-			emif->debugfs_root, emif, &emif_regdump_fops);
-	if (!dentry) {
-		ret = -ENOMEM;
-		goto err1;
-	}
-
-	dentry = debugfs_create_file("mr4", S_IRUGO,
-			emif->debugfs_root, emif, &emif_mr4_fops);
-	if (!dentry) {
-		ret = -ENOMEM;
-		goto err1;
-	}
-
+	emif->debugfs_root = debugfs_create_dir(dev_name(emif->dev), NULL);
+	debugfs_create_file("regcache_dump", S_IRUGO, emif->debugfs_root, emif,
+			    &emif_regdump_fops);
+	debugfs_create_file("mr4", S_IRUGO, emif->debugfs_root, emif,
+			    &emif_mr4_fops);
 	return 0;
-err1:
-	debugfs_remove_recursive(emif->debugfs_root);
-err0:
-	return ret;
 }
 
 static void __exit emif_debugfs_exit(struct emif_data *emif)
-- 
2.25.1

[PATCH AUTOSEL 5.4 74/80] ARM: dts: s5pv210: remove DMA controller bus node name to fix dtschema warnings

[Sasha Levin]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit ea4e792f3c8931fffec4d700cf6197d84e9f35a6 ]

There is no need to keep DMA controller nodes under AMBA bus node.
Remove the "amba" node to fix dtschema warnings like:

  amba: $nodename:0: 'amba' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/20200907161141.31034-6-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/s5pv210.dtsi | 49 +++++++++++++++-------------------
 1 file changed, 21 insertions(+), 28 deletions(-)

diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 2ad642f51fd92..8b194da334a5c 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -128,35 +128,28 @@ wakeup-interrupt-controller {
 			};
 		};
 
-		amba {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges;
-
-			pdma0: dma@e0900000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0xe0900000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <19>;
-				clocks = <&clocks CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma0: dma@e0900000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xe0900000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <19>;
+			clocks = <&clocks CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
 
-			pdma1: dma@e0a00000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0xe0a00000 0x1000>;
-				interrupt-parent = <&vic0>;
-				interrupts = <20>;
-				clocks = <&clocks CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma1: dma@e0a00000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0xe0a00000 0x1000>;
+			interrupt-parent = <&vic0>;
+			interrupts = <20>;
+			clocks = <&clocks CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		spi0: spi@e1300000 {
-- 
2.25.1

[PATCH AUTOSEL 5.4 75/80] ARM: dts: s5pv210: move fixed clocks under root node

[Sasha Levin]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit d38cae370e5f2094cbc38db3082b8e9509ae52ce ]

The fixed clocks are kept under dedicated 'external-clocks' node, thus a
fake 'reg' was added.  This is not correct with dtschema as fixed-clock
binding does not have a 'reg' property.  Moving fixed clocks out of
'soc' to root node fixes multiple dtbs_check warnings:

  external-clocks: $nodename:0: 'external-clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
  external-clocks: #size-cells:0:0: 0 is not one of [1, 2]
  external-clocks: oscillator@0:reg:0: [0] is too short
  external-clocks: oscillator@1:reg:0: [1] is too short
  external-clocks: 'ranges' is a required property
  oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/20200907161141.31034-7-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/s5pv210.dtsi | 36 +++++++++++++---------------------
 1 file changed, 14 insertions(+), 22 deletions(-)

diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 8b194da334a5c..ec41e46edaced 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -52,34 +52,26 @@ cpu@0 {
 		};
 	};
 
+	xxti: oscillator-0 {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		clock-output-names = "xxti";
+		#clock-cells = <0>;
+	};
+
+	xusbxti: oscillator-1 {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		clock-output-names = "xusbxti";
+		#clock-cells = <0>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
 
-		external-clocks {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			xxti: oscillator@0 {
-				compatible = "fixed-clock";
-				reg = <0>;
-				clock-frequency = <0>;
-				clock-output-names = "xxti";
-				#clock-cells = <0>;
-			};
-
-			xusbxti: oscillator@1 {
-				compatible = "fixed-clock";
-				reg = <1>;
-				clock-frequency = <0>;
-				clock-output-names = "xusbxti";
-				#clock-cells = <0>;
-			};
-		};
-
 		onenand: onenand@b0600000 {
 			compatible = "samsung,s5pv210-onenand";
 			reg = <0xb0600000 0x2000>,
-- 
2.25.1

[PATCH AUTOSEL 5.4 76/80] ARM: dts: s5pv210: move PMU node out of clock controller

[Sasha Levin]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit bb98fff84ad1ea321823759edaba573a16fa02bd ]

The Power Management Unit (PMU) is a separate device which has little
common with clock controller.  Moving it to one level up (from clock
controller child to SoC) allows to remove fake simple-bus compatible and
dtbs_check warnings like:

  clock-controller@e0100000: $nodename:0:
    'clock-controller@e0100000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/20200907161141.31034-8-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/s5pv210.dtsi | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index ec41e46edaced..f10139bd80a53 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -92,19 +92,16 @@ chipid@e0000000 {
 		};
 
 		clocks: clock-controller@e0100000 {
-			compatible = "samsung,s5pv210-clock", "simple-bus";
+			compatible = "samsung,s5pv210-clock";
 			reg = <0xe0100000 0x10000>;
 			clock-names = "xxti", "xusbxti";
 			clocks = <&xxti>, <&xusbxti>;
 			#clock-cells = <1>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+		};
 
-			pmu_syscon: syscon@e0108000 {
-				compatible = "samsung-s5pv210-pmu", "syscon";
-				reg = <0xe0108000 0x8000>;
-			};
+		pmu_syscon: syscon@e0108000 {
+			compatible = "samsung-s5pv210-pmu", "syscon";
+			reg = <0xe0108000 0x8000>;
 		};
 
 		pinctrl0: pinctrl@e0200000 {
-- 
2.25.1

[PATCH AUTOSEL 5.4 77/80] ARM: dts: s5pv210: remove dedicated 'audio-subsystem' node

[Sasha Levin]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit 6c17a2974abf68a58517f75741b15c4aba42b4b8 ]

The 'audio-subsystem' node is an artificial creation, not representing
real hardware.  The hardware is described by its nodes - AUDSS clock
controller and I2S0.

Remove the 'audio-subsystem' node along with its undocumented compatible
to fix dtbs_check warnings like:

  audio-subsystem: $nodename:0: 'audio-subsystem' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Jonathan Bakker <xc-racer2@live.ca>
Link: https://lore.kernel.org/r/20200907161141.31034-9-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/s5pv210.dtsi | 65 +++++++++++++++-------------------
 1 file changed, 29 insertions(+), 36 deletions(-)

diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index f10139bd80a53..61822afa30ab3 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -211,43 +211,36 @@ i2c2: i2c@e1a00000 {
 			status = "disabled";
 		};
 
-		audio-subsystem {
-			compatible = "samsung,s5pv210-audss", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			clk_audss: clock-controller@eee10000 {
-				compatible = "samsung,s5pv210-audss-clock";
-				reg = <0xeee10000 0x1000>;
-				clock-names = "hclk", "xxti",
-						"fout_epll",
-						"sclk_audio0";
-				clocks = <&clocks DOUT_HCLKP>, <&xxti>,
-						<&clocks FOUT_EPLL>,
-						<&clocks SCLK_AUDIO0>;
-				#clock-cells = <1>;
-			};
+		clk_audss: clock-controller@eee10000 {
+			compatible = "samsung,s5pv210-audss-clock";
+			reg = <0xeee10000 0x1000>;
+			clock-names = "hclk", "xxti",
+				      "fout_epll",
+				      "sclk_audio0";
+			clocks = <&clocks DOUT_HCLKP>, <&xxti>,
+				 <&clocks FOUT_EPLL>,
+				 <&clocks SCLK_AUDIO0>;
+			#clock-cells = <1>;
+		};
 
-			i2s0: i2s@eee30000 {
-				compatible = "samsung,s5pv210-i2s";
-				reg = <0xeee30000 0x1000>;
-				interrupt-parent = <&vic2>;
-				interrupts = <16>;
-				dma-names = "rx", "tx", "tx-sec";
-				dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
-				clock-names = "iis",
-						"i2s_opclk0",
-						"i2s_opclk1";
-				clocks = <&clk_audss CLK_I2S>,
-						<&clk_audss CLK_I2S>,
-						<&clk_audss CLK_DOUT_AUD_BUS>;
-				samsung,idma-addr = <0xc0010000>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2s0_bus>;
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
+		i2s0: i2s@eee30000 {
+			compatible = "samsung,s5pv210-i2s";
+			reg = <0xeee30000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <16>;
+			dma-names = "rx", "tx", "tx-sec";
+			dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
+			clock-names = "iis",
+				      "i2s_opclk0",
+				      "i2s_opclk1";
+			clocks = <&clk_audss CLK_I2S>,
+				 <&clk_audss CLK_I2S>,
+				 <&clk_audss CLK_DOUT_AUD_BUS>;
+			samsung,idma-addr = <0xc0010000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_bus>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
 		};
 
 		i2s1: i2s@e2100000 {
-- 
2.25.1

[PATCH AUTOSEL 5.4 78/80] nbd: make the config put is called before the notifying the waiter

[Sasha Levin]

From: Xiubo Li <xiubli@redhat.com>

[ Upstream commit 87aac3a80af5cbad93e63250e8a1e19095ba0d30 ]

There has one race case for ceph's rbd-nbd tool. When do mapping
it may fail with EBUSY from ioctl(nbd, NBD_DO_IT), but actually
the nbd device has already unmaped.

It dues to if just after the wake_up(), the recv_work() is scheduled
out and defers calling the nbd_config_put(), though the map process
has exited the "nbd->recv_task" is not cleared.

Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/nbd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 7c577cabb9c3b..742f8160b6e28 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -787,9 +787,9 @@ static void recv_work(struct work_struct *work)
 
 		blk_mq_complete_request(blk_mq_rq_from_pdu(cmd));
 	}
+	nbd_config_put(nbd);
 	atomic_dec(&config->recv_threads);
 	wake_up(&config->recv_wq);
-	nbd_config_put(nbd);
 	kfree(args);
 }
 
-- 
2.25.1

[PATCH AUTOSEL 5.4 79/80] sgl_alloc_order: fix memory leak

[Sasha Levin]

From: Douglas Gilbert <dgilbert@interlog.com>

[ Upstream commit b2a182a40278bc5849730e66bca01a762188ed86 ]

sgl_alloc_order() can fail when 'length' is large on a memory
constrained system. When order > 0 it will potentially be
making several multi-page allocations with the later ones more
likely to fail than the earlier one. So it is important that
sgl_alloc_order() frees up any pages it has obtained before
returning NULL. In the case when order > 0 it calls the wrong
free page function and leaks. In testing the leak was
sufficient to bring down my 8 GiB laptop with OOM.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/scatterlist.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index 5813072bc5895..29346184fcf2e 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -514,7 +514,7 @@ struct scatterlist *sgl_alloc_order(unsigned long long length,
 		elem_len = min_t(u64, length, PAGE_SIZE << order);
 		page = alloc_pages(gfp, order);
 		if (!page) {
-			sgl_free(sgl);
+			sgl_free_order(sgl, order);
 			return NULL;
 		}
 
-- 
2.25.1

[PATCH AUTOSEL 5.4 80/80] nvme-rdma: fix crash when connect rejected

[Sasha Levin]

From: Chao Leng <lengchao@huawei.com>

[ Upstream commit 43efdb8e870ee0f58633fd579aa5b5185bf5d39e ]

A crash can happened when a connect is rejected.   The host establishes
the connection after received ConnectReply, and then continues to send
the fabrics Connect command.  If the controller does not receive the
ReadyToUse capsule, host may receive a ConnectReject reply.

Call nvme_rdma_destroy_queue_ib after the host received the
RDMA_CM_EVENT_REJECTED event.  Then when the fabrics Connect command
times out, nvme_rdma_timeout calls nvme_rdma_complete_rq to fail the
request.  A crash happenes due to use after free in
nvme_rdma_complete_rq.

nvme_rdma_destroy_queue_ib is redundant when handling the
RDMA_CM_EVENT_REJECTED event as nvme_rdma_destroy_queue_ib is already
called in connection failure handler.

Signed-off-by: Chao Leng <lengchao@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/rdma.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index abe4fe496d05c..a41ee9feab8e7 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -1679,7 +1679,6 @@ static int nvme_rdma_cm_handler(struct rdma_cm_id *cm_id,
 		complete(&queue->cm_done);
 		return 0;
 	case RDMA_CM_EVENT_REJECTED:
-		nvme_rdma_destroy_queue_ib(queue);
 		cm_error = nvme_rdma_conn_rejected(queue, ev);
 		break;
 	case RDMA_CM_EVENT_ROUTE_ERROR:
-- 
2.25.1

Re: [PATCH AUTOSEL 5.4 31/80] kgdb: Make "kgdbcon" work properly with "kgdb_earlycon"

[Daniel Thompson]

On Mon, Oct 26, 2020 at 07:54:27PM -0400, Sasha Levin wrote:
> From: Douglas Anderson <dianders@chromium.org>
> 
> [ Upstream commit b18b099e04f450cdc77bec72acefcde7042bd1f3 ]
> 
> On my system the kernel processes the "kgdb_earlycon" parameter before
> the "kgdbcon" parameter.  When we setup "kgdb_earlycon" we'll end up
> in kgdb_register_callbacks() and "kgdb_use_con" won't have been set
> yet so we'll never get around to starting "kgdbcon".  Let's remedy
> this by detecting that the IO module was already registered when
> setting "kgdb_use_con" and registering the console then.
> 
> As part of this, to avoid pre-declaring things, move the handling of
> the "kgdbcon" further down in the file.
> 
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> Link: https://lore.kernel.org/r/20200630151422.1.I4aa062751ff5e281f5116655c976dff545c09a46@changeid
> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

kgdb[oc]_earlycon was a new feature introduced in v5.8 so, based on the
summary above, this fix does not obviously apply to older kernels.

However after looking closely...

I think the issue described above would also occur if kgdbdbgp (an
incomprehensible sequence consonants that translates to "present
debugger via USB EHCI debug") were used in conjunction with kgdbcon
meaning backporting does make sense.


Daniel.


> ---
>  kernel/debug/debug_core.c | 22 ++++++++++++++--------
>  1 file changed, 14 insertions(+), 8 deletions(-)
> 
> diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
> index 2222f3225e53d..097ab02989f92 100644
> --- a/kernel/debug/debug_core.c
> +++ b/kernel/debug/debug_core.c
> @@ -96,14 +96,6 @@ int dbg_switch_cpu;
>  /* Use kdb or gdbserver mode */
>  int dbg_kdb_mode = 1;
>  
> -static int __init opt_kgdb_con(char *str)
> -{
> -	kgdb_use_con = 1;
> -	return 0;
> -}
> -
> -early_param("kgdbcon", opt_kgdb_con);
> -
>  module_param(kgdb_use_con, int, 0644);
>  module_param(kgdbreboot, int, 0644);
>  
> @@ -876,6 +868,20 @@ static struct console kgdbcons = {
>  	.index		= -1,
>  };
>  
> +static int __init opt_kgdb_con(char *str)
> +{
> +	kgdb_use_con = 1;
> +
> +	if (kgdb_io_module_registered && !kgdb_con_registered) {
> +		register_console(&kgdbcons);
> +		kgdb_con_registered = 1;
> +	}
> +
> +	return 0;
> +}
> +
> +early_param("kgdbcon", opt_kgdb_con);
> +
>  #ifdef CONFIG_MAGIC_SYSRQ
>  static void sysrq_handle_dbg(int key)
>  {
> -- 
> 2.25.1
>