* [PATCH 1/6] arm64: dts: allwinner: pinephone: Remove AC power supply
2020-11-05 5:41 [PATCH 0/6] PinePhone Device Tree Enhancements Samuel Holland
@ 2020-11-05 5:41 ` Samuel Holland
2020-11-05 5:41 ` [PATCH 2/6] arm64: dts: allwinner: pinephone: Set ALDO3 to exactly 3v0 Samuel Holland
` (5 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Samuel Holland @ 2020-11-05 5:41 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Jernej Skrabec, linux-arm-kernel
Cc: Rob Herring, devicetree, linux-kernel, linux-sunxi, Samuel Holland
The AXP803 in the Pinephone has its ACIN and VBUS pins shorted together.
In this configuration, the VBUS control registers take priority over the
ACIN control registers, which means the ACIN sysfs knobs have no effect.
Remove the AC power supply from the DTS, since VBUS is really the only
power supply.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi | 4 ----
1 file changed, 4 deletions(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index 25150aba749d..48050bbd941d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -251,10 +251,6 @@ axp803: pmic@3a3 {
#include "axp803.dtsi"
-&ac_power_supply {
- status = "okay";
-};
-
&battery_power_supply {
status = "okay";
};
--
2.26.2
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH 2/6] arm64: dts: allwinner: pinephone: Set ALDO3 to exactly 3v0
2020-11-05 5:41 [PATCH 0/6] PinePhone Device Tree Enhancements Samuel Holland
2020-11-05 5:41 ` [PATCH 1/6] arm64: dts: allwinner: pinephone: Remove AC power supply Samuel Holland
@ 2020-11-05 5:41 ` Samuel Holland
2020-11-05 5:41 ` [PATCH 3/6] arm64: dts: allwinner: pinephone: Add LED flash Samuel Holland
` (4 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Samuel Holland @ 2020-11-05 5:41 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Jernej Skrabec, linux-arm-kernel
Cc: Rob Herring, devicetree, linux-kernel, linux-sunxi, Samuel Holland
ALDO3 is used as the power supply for the LRADC keys voltage divider,
in addition to supplying AVCC and VCC-PLL. While AVCC and VCC-PLL will
accept any voltage between 2v7 and 3v3, LRADC needs a precise 3v0 input
to maintain the expected 2:3 ratio between the internal 2v0 reference
voltage and the external supply.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index 48050bbd941d..57c89c3b71e9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -270,8 +270,8 @@ ®_aldo2 {
®_aldo3 {
regulator-always-on;
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
regulator-name = "vcc-pll-avcc";
};
--
2.26.2
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH 3/6] arm64: dts: allwinner: pinephone: Add LED flash
2020-11-05 5:41 [PATCH 0/6] PinePhone Device Tree Enhancements Samuel Holland
2020-11-05 5:41 ` [PATCH 1/6] arm64: dts: allwinner: pinephone: Remove AC power supply Samuel Holland
2020-11-05 5:41 ` [PATCH 2/6] arm64: dts: allwinner: pinephone: Set ALDO3 to exactly 3v0 Samuel Holland
@ 2020-11-05 5:41 ` Samuel Holland
2020-11-05 5:41 ` [PATCH 4/6] arm64: dts: allwinner: pinephone: Add light/proximity sensor Samuel Holland
` (3 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Samuel Holland @ 2020-11-05 5:41 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Jernej Skrabec, linux-arm-kernel
Cc: Rob Herring, devicetree, linux-kernel, linux-sunxi,
Samuel Holland, Luca Weiss
From: Luca Weiss <luca@z3ntu.xyz>
All revisions of the PinePhone have an SGM3140 LED flash. The gpios were
swapped on v1.0 of the board, but this was fixed in later revisions.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
.../boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts | 5 +++++
.../boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts | 5 +++++
.../boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts | 5 +++++
.../boot/dts/allwinner/sun50i-a64-pinephone.dtsi | 11 +++++++++++
4 files changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
index 0c42272106af..3d5a2ae9aa39 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts
@@ -9,3 +9,8 @@ / {
model = "Pine64 PinePhone Developer Batch (1.0)";
compatible = "pine64,pinephone-1.0", "allwinner,sun50i-a64";
};
+
+&sgm3140 {
+ enable-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
+ flash-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
index 3e99a87e9ce5..c9b9f6e9ee8c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
@@ -28,3 +28,8 @@ &backlight {
num-interpolated-steps = <50>;
default-brightness-level = <400>;
};
+
+&sgm3140 {
+ enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+ flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
index a9f5b670c9b8..94e4f11e0215 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
@@ -38,3 +38,8 @@ &lis3mdl {
interrupt-parent = <&pio>;
interrupts = <1 1 IRQ_TYPE_EDGE_RISING>; /* PB1 */
};
+
+&sgm3140 {
+ enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+ flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index 57c89c3b71e9..e595a8262920 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -49,6 +49,17 @@ red {
};
};
+ sgm3140: led-controller {
+ compatible = "sgmicro,sgm3140";
+ vin-supply = <®_dcdc1>;
+
+ sgm3140_flash: led {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ flash-max-timeout-us = <250000>;
+ };
+ };
+
speaker_amp: audio-amplifier {
compatible = "simple-audio-amplifier";
enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
--
2.26.2
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH 4/6] arm64: dts: allwinner: pinephone: Add light/proximity sensor
2020-11-05 5:41 [PATCH 0/6] PinePhone Device Tree Enhancements Samuel Holland
` (2 preceding siblings ...)
2020-11-05 5:41 ` [PATCH 3/6] arm64: dts: allwinner: pinephone: Add LED flash Samuel Holland
@ 2020-11-05 5:41 ` Samuel Holland
2020-11-05 11:23 ` Maxime Ripard
2020-11-05 5:41 ` [PATCH 5/6] arm64: dts: allwinner: pinephone: Add WiFi support Samuel Holland
` (2 subsequent siblings)
6 siblings, 1 reply; 10+ messages in thread
From: Samuel Holland @ 2020-11-05 5:41 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Jernej Skrabec, linux-arm-kernel
Cc: Rob Herring, devicetree, linux-kernel, linux-sunxi,
Samuel Holland, Ondrej Jirman
From: Ondrej Jirman <megous@megous.com>
Pinephone has STK3311-X proximity sensor. Add support for it.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
.../arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index e595a8262920..9544d7658794 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -160,6 +160,16 @@ lis3mdl: lis3mdl@1e {
vddio-supply = <®_dldo1>;
};
+ /* Light/proximity sensor */
+ stk3311@48 {
+ compatible = "sensortek,stk3311";
+ reg = <0x48>;
+ interrupt-parent = <&pio>;
+ interrupts = <1 0 IRQ_TYPE_EDGE_FALLING>; /* PB0 */
+ vdd-supply = <®_ldo_io0>;
+ leda-supply = <®_dldo1>;
+ };
+
/* Accelerometer/gyroscope */
mpu6050@68 {
compatible = "invensense,mpu6050";
--
2.26.2
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH 4/6] arm64: dts: allwinner: pinephone: Add light/proximity sensor
2020-11-05 5:41 ` [PATCH 4/6] arm64: dts: allwinner: pinephone: Add light/proximity sensor Samuel Holland
@ 2020-11-05 11:23 ` Maxime Ripard
0 siblings, 0 replies; 10+ messages in thread
From: Maxime Ripard @ 2020-11-05 11:23 UTC (permalink / raw)
To: Samuel Holland
Cc: Chen-Yu Tsai, Jernej Skrabec, linux-arm-kernel, Rob Herring,
devicetree, linux-kernel, linux-sunxi, Ondrej Jirman
[-- Attachment #1: Type: text/plain, Size: 1312 bytes --]
Hi,
On Wed, Nov 04, 2020 at 11:41:33PM -0600, Samuel Holland wrote:
> From: Ondrej Jirman <megous@megous.com>
>
> Pinephone has STK3311-X proximity sensor. Add support for it.
>
> Signed-off-by: Ondrej Jirman <megous@megous.com>
> Signed-off-by: Samuel Holland <samuel@sholland.org>
> ---
> .../arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> index e595a8262920..9544d7658794 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> @@ -160,6 +160,16 @@ lis3mdl: lis3mdl@1e {
> vddio-supply = <®_dldo1>;
> };
>
> + /* Light/proximity sensor */
> + stk3311@48 {
> + compatible = "sensortek,stk3311";
> + reg = <0x48>;
> + interrupt-parent = <&pio>;
> + interrupts = <1 0 IRQ_TYPE_EDGE_FALLING>; /* PB0 */
> + vdd-supply = <®_ldo_io0>;
> + leda-supply = <®_dldo1>;
> + };
> +
The node names should be the class of the device, not the model. The
other sensors here have a similar issue though, so I've applied it, but
could you send a subsequent patch fixing this?
Thanks!
Maxime
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 5/6] arm64: dts: allwinner: pinephone: Add WiFi support
2020-11-05 5:41 [PATCH 0/6] PinePhone Device Tree Enhancements Samuel Holland
` (3 preceding siblings ...)
2020-11-05 5:41 ` [PATCH 4/6] arm64: dts: allwinner: pinephone: Add light/proximity sensor Samuel Holland
@ 2020-11-05 5:41 ` Samuel Holland
2020-11-05 11:24 ` Maxime Ripard
2020-11-05 5:41 ` [PATCH 6/6] arm64: dts: allwinner: pinephone: Add Bluetooth support Samuel Holland
2020-11-05 11:25 ` [PATCH 0/6] PinePhone Device Tree Enhancements Maxime Ripard
6 siblings, 1 reply; 10+ messages in thread
From: Samuel Holland @ 2020-11-05 5:41 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Jernej Skrabec, linux-arm-kernel
Cc: Rob Herring, devicetree, linux-kernel, linux-sunxi,
Samuel Holland, Ondrej Jirman
From: Ondrej Jirman <megous@megous.com>
The PinePhone has a Realtek rtl8723cs WiFi module.
On mainboard revisions 1.0 and 1.1, the reset input is always pulled
high, so no power sequence is needed. On mainboard revision 1.2, the
reset input is connected to PL2.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
.../allwinner/sun50i-a64-pinephone-1.2.dts | 9 ++++++++
.../dts/allwinner/sun50i-a64-pinephone.dtsi | 22 +++++++++++++++++++
2 files changed, 31 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
index 94e4f11e0215..e7cf9d8577c1 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
@@ -8,6 +8,11 @@
/ {
model = "Pine64 PinePhone (1.2)";
compatible = "pine64,pinephone-1.2", "allwinner,sun50i-a64";
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+ };
};
&backlight {
@@ -39,6 +44,10 @@ &lis3mdl {
interrupts = <1 1 IRQ_TYPE_EDGE_RISING>; /* PB1 */
};
+&mmc1 {
+ mmc-pwrseq = <&wifi_pwrseq>;
+};
+
&sgm3140 {
enable-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
flash-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index 9544d7658794..e173096a7e68 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -13,6 +13,7 @@
/ {
aliases {
+ ethernet0 = &rtl8723cs;
serial0 = &uart0;
};
@@ -49,6 +50,13 @@ red {
};
};
+ reg_vbat_wifi: vbat-wifi {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vbat-wifi";
+ };
+
sgm3140: led-controller {
compatible = "sgmicro,sgm3140";
vin-supply = <®_dcdc1>;
@@ -216,6 +224,20 @@ &mmc0 {
status = "okay";
};
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <®_vbat_wifi>;
+ vqmmc-supply = <®_dldo4>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ rtl8723cs: wifi@1 {
+ reg = <1>;
+ };
+};
+
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
--
2.26.2
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH 5/6] arm64: dts: allwinner: pinephone: Add WiFi support
2020-11-05 5:41 ` [PATCH 5/6] arm64: dts: allwinner: pinephone: Add WiFi support Samuel Holland
@ 2020-11-05 11:24 ` Maxime Ripard
0 siblings, 0 replies; 10+ messages in thread
From: Maxime Ripard @ 2020-11-05 11:24 UTC (permalink / raw)
To: Samuel Holland
Cc: Chen-Yu Tsai, Jernej Skrabec, linux-arm-kernel, Rob Herring,
devicetree, linux-kernel, linux-sunxi, Ondrej Jirman
[-- Attachment #1: Type: text/plain, Size: 1325 bytes --]
On Wed, Nov 04, 2020 at 11:41:34PM -0600, Samuel Holland wrote:
> From: Ondrej Jirman <megous@megous.com>
>
> The PinePhone has a Realtek rtl8723cs WiFi module.
>
> On mainboard revisions 1.0 and 1.1, the reset input is always pulled
> high, so no power sequence is needed. On mainboard revision 1.2, the
> reset input is connected to PL2.
>
> Signed-off-by: Ondrej Jirman <megous@megous.com>
> Signed-off-by: Samuel Holland <samuel@sholland.org>
> ---
> .../allwinner/sun50i-a64-pinephone-1.2.dts | 9 ++++++++
> .../dts/allwinner/sun50i-a64-pinephone.dtsi | 22 +++++++++++++++++++
> 2 files changed, 31 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
> index 94e4f11e0215..e7cf9d8577c1 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
> @@ -8,6 +8,11 @@
> / {
> model = "Pine64 PinePhone (1.2)";
> compatible = "pine64,pinephone-1.2", "allwinner,sun50i-a64";
> +
> + wifi_pwrseq: wifi_pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
> + };
Underscores are not valid in node names. I've fixed it while applying
Maxime
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 6/6] arm64: dts: allwinner: pinephone: Add Bluetooth support
2020-11-05 5:41 [PATCH 0/6] PinePhone Device Tree Enhancements Samuel Holland
` (4 preceding siblings ...)
2020-11-05 5:41 ` [PATCH 5/6] arm64: dts: allwinner: pinephone: Add WiFi support Samuel Holland
@ 2020-11-05 5:41 ` Samuel Holland
2020-11-05 11:25 ` [PATCH 0/6] PinePhone Device Tree Enhancements Maxime Ripard
6 siblings, 0 replies; 10+ messages in thread
From: Samuel Holland @ 2020-11-05 5:41 UTC (permalink / raw)
To: Maxime Ripard, Chen-Yu Tsai, Jernej Skrabec, linux-arm-kernel
Cc: Rob Herring, devicetree, linux-kernel, linux-sunxi,
Samuel Holland, Ondrej Jirman
From: Ondrej Jirman <megous@megous.com>
The PinePhone has a Realtek rtl8723cs Bluetooth controller.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
.../boot/dts/allwinner/sun50i-a64-pinephone.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index e173096a7e68..1083055a731f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -447,6 +447,19 @@ &uart0 {
status = "okay";
};
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "realtek,rtl8723cs-bt";
+ device-wake-gpios = <&pio 7 6 GPIO_ACTIVE_LOW>; /* PH6 */
+ enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+ host-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+ };
+};
+
/* Connected to the modem (hardware flow control can't be used) */
&uart3 {
pinctrl-names = "default";
--
2.26.2
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH 0/6] PinePhone Device Tree Enhancements
2020-11-05 5:41 [PATCH 0/6] PinePhone Device Tree Enhancements Samuel Holland
` (5 preceding siblings ...)
2020-11-05 5:41 ` [PATCH 6/6] arm64: dts: allwinner: pinephone: Add Bluetooth support Samuel Holland
@ 2020-11-05 11:25 ` Maxime Ripard
6 siblings, 0 replies; 10+ messages in thread
From: Maxime Ripard @ 2020-11-05 11:25 UTC (permalink / raw)
To: Samuel Holland
Cc: Chen-Yu Tsai, Jernej Skrabec, linux-arm-kernel, Rob Herring,
devicetree, linux-kernel, linux-sunxi
[-- Attachment #1: Type: text/plain, Size: 298 bytes --]
On Wed, Nov 04, 2020 at 11:41:29PM -0600, Samuel Holland wrote:
> This series fixes a couple of small issues with the PinePhone device
> tree, and collects some patches adding support for peripherals that
> recently received driver or DT binding support.
Applied all those patches, thanks!
Maxime
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread